Commit Graph

19 Commits

Author SHA1 Message Date
Linus Torvalds 587a9e1f95 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
2012-08-03 10:52:41 -07:00
Geert Uytterhoeven dc0610518f m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need
to wrap our own _[se]bss around it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-27 09:59:43 +02:00
Greg Ungerer dc5588ae3c m68knommu: fix 68328 local setting of timer interrupt handler
Compiling for 68328 based targets fails with:

    arch/m68k/platform/68328/timers.c: In function ‘hw_tick’:
    arch/m68k/platform/68328/timers.c:65:2: error: implicit declaration of function ‘arch_timer_interrupt’
    arch/m68k/platform/68328/timers.c: At top level:
    arch/m68k/platform/68328/timers.c:102:6: error: conflicting types for ‘hw_timer_init’
    arch/m68k/include/asm/machdep.h:36:13: note: previous declaration of ‘hw_timer_init’ was here

Changes made to hw_timer_init() didn't get updated in the 68328 timer code.
So process and call the "handler" arg that is now passed into that
hw_timer_init() function.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12 11:58:27 +10:00
Al Viro a54f1655be m68k: add TIF_NOTIFY_RESUME and handle it.
TIF_NOTIFY_RESUME added (as bit 5).  That way nommu glue needs no changes at
all; mmu one needs just to replace jmi do_signal_return to jne do_signal_return
There we have flags shifted up, until bit 6 (SIGPENDING) is in MSBit; instead
of checking that MSBit is set (jmi) we check that MSBit or something below it
is set (jne); bits 0..4 are never set, so that's precisely "bit 6 or bit 5 is
set".

Usual handling of NOTIFY_RESUME/SIGPENDING is done in do_notify_resume(); glue
calls it instead of do_signal().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:59:47 -04:00
David Howells 803f69144f Disintegrate asm/system.h for M68K
Disintegrate asm/system.h for M68K.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
2012-03-28 18:30:02 +01:00
Greg Ungerer 9517746131 m68knommu: make persistent clock code consistent with m68k
The read_persistent_clock() code is different on m68knommu, for really no
reason. With a few changes to support function names and some code
re-organization the code can be made the same.

This will make it easier to merge the arch/m68k/kernel/time.c for m68k and
m68knommu in a future patch.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Greg Ungerer d3f033f894 m68knommu: remove reduntant definitions of _ramvec
The base of the real RAM resident hardware vectors, _ramvec, is declared in
our asm/traps.h. No need to have local declarations spread around in other
files that use this. So remove them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Greg Ungerer 2c85bd3189 m68knommu: remove no longer used rom_length from Palm/Pilot start up code
Compiling for the m68knommu/68328 Palm/Pilot target you get:

  LD      vmlinux
arch/m68k/platform/68328/head.o: In function `L3':
(.text+0x170): undefined reference to `rom_length'

"rom_length" is not used any longer by any of the m68knommu code.
So remove it from here too.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-30 10:20:15 +10:00
Greg Ungerer c0e0c89c08 m68knommu: fix broken boot logo inclusion
Compiling for the m68knommu/68328 Palm/Pilot target you get:

  AS      arch/m68k/platform/68328/head-pilot.o
arch/m68k/platform/68328/head-pilot.S:37:23: fatal error: bootlogo.rh: No such file or directory

The build for this target used to do a conversion on a C coded boot logo
and include this in the head assembler code. This got broken by changes to
the local Makefile.

Clean all this up by just including the C coded boot logo struct in the
C code. With the appropriate alignment attribute there is no difference
to the way it can be used.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-30 10:17:34 +10:00
john stultz a2a3dfb8ef clocksource: m86k: Convert to clocksource_register_hz/khz
Updated to merge the valid bits of the two m68k patches.

This converts the m86k clocksources to use clocksource_register_hz/khz

This is untested, so any assistance in testing would be appreciated!

CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24 21:47:56 +10:00
Greg Ungerer 61619b1207 m68k: merge mmu and non-mmu include/asm/entry.h files
The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu
version (entry_no.h) are not about the presence or use of an MMU at all.
The main changes are to support the ColdFire processors. The code for
trap entry and exit for all types of 68k processor outside coldfire is
the same.

So merge the files back to a single entry.h and share the common 68k
entry/exit code. Some changes are required for the non-mmu entry
handlers to adopt the differing macros for system call and interrupt
entry, but this is quite strait forward. The changes for the ColdFire
remove a couple of instructions for the separate a7 register case, and
are no worse for the older single a7 register case.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-10-18 14:22:25 +10:00
Greg Ungerer 281eff5322 m68k: merge mmu and non-mmu arch Makefiles
Most of the build logic is the same for the mmu and non-mmu m68k targets.
Merge the top level architecture Makefiles back into a single Makefile.

For the most part this is just adding the non-mmu processor types and
their specific cflags and other options into the mmu Makefile.

Note that all the BOARD setting logic that was in the non-mmu Makefile
is completely removed. It was no longer being used at all.

This has been build and run tested on ColdFire targets and ARAnyM.
It has been build tested on all the m68k defconfig targets using a
gcc-4.5.1 based toolchain.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-10-18 14:22:25 +10:00
Geert Uytterhoeven 8c9f08f9de m68k: Revive reporting of spurious interrupts
commit 2502b667ea ("Change the m68knommu irq
handling to use the generic irq framework.") removed the reporting of spurious
interrupts on nommu (68328 and 68360).

Bring it back in a generic way, using "atomic_t irq_err_count", as that's what
most of the other architectures are using.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer 622e9472dd m68knommu: correctly use trap_init
Currently trap_init() is an empty function for m68knommu. Instead
the vectors are being setup as part of the IRQ initialization.
This is inconsistent with m68k and other architectures.

Change the local init_vectors() to be trap_init(), and init the
vectors at the correct time during startup. This will help merge of
m68k and m68knommu trap code in the furture.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer f941f5caa0 m68k: merge MMU and non MMU versions of system.h
The non-MMU m68k targets can use the same asm/system.h as the MMU
targets. So switch the current system_mm.h to be system.h and remove
system_no.h.

The assembly support code for the non-MMU resume functions needs to
be modified to match the now common switch_to() macro. Specifically
this means correctly saving and restoring the status flags in the case
of the ColdFire resume, and some reordering of the code to not use
registers before they are saved or after they are restored.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:40 +10:00
Geert Uytterhoeven b60de9f514 m68knommu: Remove obsolete #include <linux/sys.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24 15:17:19 +10:00
Greg Ungerer aa4d1f897f m68k: merge mmu and non-mmu versions of asm-offsets.c
It is strait forward to merge the mmu and non-mmu versions of
asm-offstes.c. Some name changes are required for the preempt and
thread_info.flags in the non-mmu entry.S assembler to make them
consistent for both setups.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24 15:17:18 +10:00
Thomas Gleixner 0b98b1636c m68k: Convert irq function namespace
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:15 +02:00
Greg Ungerer 66d857b08b m68k: merge m68k and m68knommu arch directories
There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-25 14:05:13 +10:00