Commit Graph

67 Commits

Author SHA1 Message Date
Aravind Thokala b85d65dd47 spi/bcm63xx: Fix checkpatch warnings
This patch fixes the checkpatch.pl warnings on the driver
file.

Signed-off-by: Aravind Thokala <aravind.thk@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-21 12:14:54 +01:00
Jonas Gorski ccd0657c33 spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilation
Fix compilation by renaming argument dev to spi as expected by the code.

Fixes the following error:

drivers/spi/spi-bcm63xx.c: In function ‘bcm63xx_spi_max_length’:
drivers/spi/spi-bcm63xx.c:434:50: error: ‘spi’ undeclared (first use in this function)
  struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
                                                  ^~~

Fixes: 0135c03df9 ("spi/bcm63xx: make spi subsystem aware of message size limits")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 16:25:48 -08:00
Jonas Gorski c29f08890a spi/bcm63xx: allow for probing through devicetree
Add required binding support to probe through device tree.

Use the compatible instead of the resource size for identifiying the
block type, and allow reducing the number of cs lines through OF.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:04:14 -08:00
Jonas Gorski 0135c03df9 spi/bcm63xx: make spi subsystem aware of message size limits
The bcm63xx SPI controller does not allow manual control of the CS
lines and will toggle it automatically before and after sending data,
so we are limited to messages that fit in the FIFO buffer. Since the CS
lines aren't available as GPIOs either, we will need to make slave
drivers aware of this limitation so they can handle them accordingly.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 09:50:50 -08:00
Mark Brown 3c2789239a Merge remote-tracking branches 'spi/topic/bcm63xx', 'spi/topic/butterfly', 'spi/topic/cadence' and 'spi/topic/davinci' into spi-next 2016-01-11 16:48:30 +00:00
Arnd Bergmann 0ba2cf70d2 spi: bcm63xx: use correct format string for printing a resource
With a 64-bit resource_size_t, we get a build warning on bcm63xx_spi_probe:

drivers/spi/spi-bcm63xx.c:565:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]

As we are printing a resource, we can just use the %pr format
specifier that pretty-prints the address and avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16 18:43:41 +00:00
Geert Uytterhoeven 4dde99bd32 spi/bcm63xx: Move default clock configuration to kill compiler warning
drivers/spi/spi-bcm63xx.c: In function ‘bcm63xx_spi_setup_transfer’:
drivers/spi/spi-bcm63xx.c:207: warning: ‘clk_cfg’ may be used uninitialized in this function

While this is a false positive, it can easily be avoided by selecting
the default clock configuration first.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16 17:44:21 +00:00
Jonas Gorski 44d8fb3094 spi/bcm63xx: move register definitions into the driver
Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch specific
includes. Make use of different device names to identify the version of
the block we have.

Since we now have full control over the message width, we can drop the
size check, which was broken anyway, since it never set ret to any error
code.

Also since we now have no arch depedendent resources, we can now allow
compiling it for any arch, hidden behind COMPILE_TEST.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 01:19:58 +09:00
Jonas Gorski f13a5e8a85 spi/bcm63xx: move message control word description to register offsets
Make the message control word parameters part of the register offsets
array so we have them all in one struct.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-12 17:24:33 +01:00
Jonas Gorski 682b5280bf spi/bcm63xx: fix standard accessors and compile guard
Use the correct guard CONFIG_CPU_BIG_ENDIAN and the *be accessors to
follow native endianness on big endian systems.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-12 17:24:32 +01:00
Jonas Gorski 158fcc4e05 spi/bcm63xx: replace custom io accessors with standard ones
Replace all bcm_read* with (io)read. Due to this block following
system endianness, make sure we match that.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 19:48:16 +01:00
Jonas Gorski a45fcea5b2 spi/bcm63xx: hardcode busnum to 0
We always pass 0 as the spi bus number, so we might as well hard code
it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 19:48:16 +01:00
Jonas Gorski 6505999730 spi/bcm63xx: always use a fixed number of CS
We always pass 8 for the number of chip selects, so we can as well
hardcode it to this number.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 19:48:16 +01:00
Jonas Gorski 2bdf5151a3 spi/bcm63xx: remove unused rx_tail variable
Fixes the following warning:
drivers/spi/spi-bcm63xx.c:125:5: warning: unused variable 'rx_tail' [-Wunused-variable]
  u8 rx_tail;
     ^

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 19:48:15 +01:00
Jarkko Nikula 2c658e212c spi: Remove FSF mailing addresses
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 15:32:42 +00:00
Wolfram Sang 14ac00e033 spi: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:36 +02:00
Axel Lin e4745fef55 spi: Remove unneeded include of linux/workqueue.h
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:20:15 +01:00
Mark Brown 6e07b9179a Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', 'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next 2014-03-30 00:51:17 +00:00
Mark Brown 9dee279b40 Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-next 2014-03-30 00:51:03 +00:00
Axel Lin 7f8cf088f0 spi: bcm63xx: Remove unused define for PFX
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-25 17:53:41 +00:00
Axel Lin aa0fe82629 spi: Use reinit_completion at appropriate places
Calling init_completion() once is enough.
For the rest of the iterations, call reinit_completion() instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10 12:32:16 +00:00
Paul Gortmaker 3a44623d5e spi: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03 12:20:35 +00:00
Mark Brown 36e66bf84f Merge remote-tracking branches 'spi/topic/bcm2835', 'spi/topic/bcm63xx', 'spi/topic/bcm63xx-hsspi', 'spi/topic/bitbang', 'spi/topic/bpw', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/davinci', 'spi/topic/dw' and 'spi/topic/falcon' into spi-linus 2014-01-23 13:07:05 +00:00
Wei Yongjun 9637b86fd1 spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove()
Once a spi_master_get() call succeeds, we need an additional
spi_master_put() call to free the memory, otherwise we will
leak a reference to master. Fix by removing the unnecessary
spi_master_get() call.

Fixes: 247263dba2 ('spi: bcm63xx: use devm_spi_register_master()')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 22:41:50 +00:00
Jonas Gorski 1bae20285b spi/bcm63xx: fix pm sleep support
Use the correct symbol to guard the callbacks and use appropriate defines
for setting up the ops struct.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 22:40:19 +00:00
Jonas Gorski ea01e8a4cd spi/bcm63xx: check return value of clk_prepare_enable
Ensure we notice if the clock cannot be enabled for any reason and pass
the error down.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 22:40:19 +00:00
Jonas Gorski 20e9e78f8b spi/bcm63xx: don't reject reads >= 256 bytes
The rx_tail register is only 8 bit wide, so it will wrap around
after 256 read bytes. This makes it rather meaningless, so drop any
usage of it to not treat reads over 256 as failed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 22:40:19 +00:00
Jingoo Han acf4fc6ffa spi: bcm63xx: Use devm_clk_get()
Use devm_clk_get() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 22:35:50 +00:00
Jonas Gorski 86b3bde003 spi/bcm63xx: don't substract prepend length from total length
The spi command must include the full message length including any
prepended writes, else transfers larger than 256 bytes will be
incomplete.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-12-17 22:34:55 +00:00
Wei Yongjun ec3252687a spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove()
Once a spi_master_get() call succeeds, we need an additional
spi_master_put() call to free the memory, otherwise we will
leak a reference to master. Fix by removing the unnecessary
spi_master_get() call.

Fixes: 247263dba2 ('spi: bcm63xx: use devm_spi_register_master()')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15 10:32:38 +00:00
Jingoo Han bca76931b9 spi: bcm63xx: use devm_spi_register_master()
Use devm_spi_register_master() to make cleanup paths simpler,
and remove a duplicate put.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26 11:41:18 +01:00
Mark Brown 85cac43132 Merge remote-tracking branch 'spi/topic/qspi' into spi-next 2013-09-01 13:49:06 +01:00
Mark Brown 68aa4cb337 Merge remote-tracking branch 'spi/topic/pdata' into spi-next 2013-09-01 13:49:03 +01:00
Axel Lin a1216394e6 spi: Use dev_get_drvdata at appropriate places
Use dev_get_drvdata() instead of platform_get_drvdata(to_platform_device(dev)).

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:57:14 +01:00
Jingoo Han 8074cf063e spi: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:56:23 +01:00
Julia Lawall de0fa83c41 spi/spi-{bcm63xx.c,bfin-v3.c}: simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14 17:47:58 +01:00
Mark Brown 5355d96d6f spi/bcm63xx: Convert to core runtime PM
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:00:19 +01:00
Mark Brown 6140b05ca3 Merge remote-tracking branch 'spi/topic/core' into spi-next 2013-06-26 16:20:58 +01:00
Stephen Warren 24778be20f spi: convert drivers to use bits_per_word_mask
Fill in the recently added spi_master.bits_per_word_mask field in as
many drivers as possible. Make related cleanups, such as removing any
redundant error-checking, or empty setup callbacks.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-29 20:48:17 +01:00
Jingoo Han 89e8773075 spi: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13 18:00:30 +04:00
Jonas Gorski ab300d1817 spi/bcm63xx: remove unused speed_hz variable
speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08 13:42:10 +01:00
Jonas Gorski b66c773002 spi/bcm63xx: use devm_ioremap_resource()
Use devm_ioremap_resource() which provides its own error messages.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:48 +00:00
Jonas Gorski 68792e2a19 spi/bcm63xx: inline hz usage in bcm63xx_spi_setup_transfer
bcm63xx_spi_setup_transfer is called from only one place, and that has
t always set, to hz will always be t->speed_hz - just use it directly in
the two places instead of moving it in a local variable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:48 +00:00
Jonas Gorski c94df49542 spi/bcm63xx: inline bcm63xx_spi_check_transfer
It only does one check, so just do the check directly in the caller.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:47 +00:00
Jonas Gorski 31e4eaaa54 spi/bcm63xx: remove spi chip select validity check
The check would belong in bcm63xx_spi_setup if the spi subsystem
weren't already doing the check for us, so just drop it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:46 +00:00
Jonas Gorski 58d8bebea5 spi/bcm63xx: simplify bcm63xx_spi_check_transfer
bcm63xx_spi_check_transfer is only called from one place that has
t always set, so directly check the transfer's bits_per_word.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:46 +00:00
Jonas Gorski e2bdae0632 spi/bcm63xx: check spi bits_per_word in spi_setup
Instead of fixing up the bits_per_word (which the spi subsystem already
does for us), check it for supported values.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:45 +00:00
Jonas Gorski 52f83bbd65 spi/bcm63xx: remove unused variable bs from bcm63xx_spi_setup
It is only written, but never read.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:44 +00:00
Jonas Gorski c3db2b0b14 spi/bcm63xx: remove unneeded debug message
The spi subsystem already provides this info in a more extensive
debug print except for the nsecs/bit - which wasn't calculated anyway
and fixed to 0.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:44 +00:00
Jonas Gorski ef9ed4b9c9 spi/bcm63xx: remove duplicated mode bits check
The spi subsystem already checks the mode bits before calling setup.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:38 +00:00