Commit Graph

211 Commits

Author SHA1 Message Date
Peter Chen bcdea50312 usb: dwc3: gadget: use common is_selfpowered
Delete private selfpowered variable, and use common one.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29 10:35:40 -06:00
Felipe Balbi 5c7b3b02de usb: dwc3: gadget: add missing spin_lock()
commit 8e74475b0e (usb: dwc3: gadget: use udc-core's
reset notifier) added support for the new UDC core's
reset notifier to dwc3 but while at it, it removed
a spin_lock() from dwc3_reset_gadget() which might
cause an unbalanced spin_unlock() further down the line

Fixes: 8e74475b0e (usb: dwc3: gadget: use udc-core's reset notifier)
Cc: <stable@vger.kernel.org> # v3.19
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29 10:29:18 -06:00
Felipe Balbi 73815280a5 usb: dwc3: remove reliance on dev_vdbg()
By moving all dev_vdbg() to tracepoints, we
can finally get rid of dev_vdbg() usage from
dwc3.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27 14:00:10 -06:00
Felipe Balbi e9f2aa871c usb: dwc3: gadget: WARN() in case of unknown IRQ
if an unknown IRQ event is triggered, that means
the HW is really misbehaving. Instead of printing
a debug message, let's WARN() so users report
when that happens.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27 13:56:10 -06:00
Felipe Balbi 4cd8f6d055 usb: dwc3: gadget: avoid variable shadowing
We already have both ret and dwc defined in this
same function.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27 13:25:09 -06:00
Felipe Balbi d1fc4440d7 Linux 3.19-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUu0x7AAoJEHm+PkMAQRiGH/8H/14SgHC8A+tGEY1Hmgr7Y6ah
 kAcev/QMIxvtxKK0zdhgSILiBUrbK1CAXFGbueUAHgSaCucry5rpJvhFCIzSaCmm
 60yLZKvNrxXX4Zc1SYxxW+2EfDCNd0tO6uZK30kyzYYmw6fCgLMEXL6pFI0wFJRg
 G41yL7MogjJJP0JFGjwrFTeJ6ZBahErOmMpx1qrHuDN8cbdZvG8w6A0KP7ch6Ct1
 qdwcpOK4L9AXG+fbE7AJCSBkVev4KqwknPSWQ+jWX7ftw3q0P1O6dXY94ob3PqVi
 jsWmraOCd5uJrX9uSiOJCsbwoaHHMTNOsEF71qQKDrQzcGCPJAxd1Mi696JdDAQ=
 =jNTS
 -----END PGP SIGNATURE-----

Merge tag 'v3.19-rc5' into next

Linux 3.19-rc5

Conflicts:
	drivers/usb/dwc2/gadget.c
	drivers/usb/gadget/udc/bdc/bdc_ep.c
2015-01-19 09:57:20 -06:00
Amit Virdi 39e60635a0 usb: dwc3: gadget: Stop TRB preparation after limit is reached
DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This
means, the max TRBs that can be submitted for an EP is fixed to 32. Since the
request queue for an EP is a linked list, any number of requests can be queued
to it by the gadget layer.  However, the dwc3 driver must not submit TRBs more
than the pool it has created for. This limit wasn't respected when SG was used
resulting in submitting more than the max TRBs, eventually leading to
non-transfer of the TRBs submitted over the max limit.

Root cause:
When SG is used, there are two loops iterating to prepare TRBs:
 - Outer loop over the request_list
 - Inner loop over the SG list
The code was missing break to get out of the outer loop.

Fixes: eeb720fb21 (usb: dwc3: gadget: add support for SG lists)
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14 11:29:05 -06:00
Amit Virdi ec512fb8e5 usb: dwc3: gadget: Fix TRB preparation during SG
When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3
request (dwc3_request). So while preparing TRBs, the 'last' flag should be set
only when it is the last TRB being prepared from the last dwc3_request entry.

The current implementation uses list_is_last to check if the dwc3_request is the
last entry from the request_list. However, list_is_last returns false for the
last entry too. This is because, while preparing the first TRB from a request,
the function dwc3_prepare_one_trb modifies the request's next and prev pointers
while moving the URB to req_queued. Hence, list_is_last always returns false no
matter what.

The correct way is not to access the modified pointers of dwc3_request but to
use list_empty macro instead.

Fixes: e5ba5ec833 (usb: dwc3: gadget: fix scatter gather implementation)
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14 11:28:23 -06:00
Amit Virdi 110381e11b usb: dwc3: gadget: Remove redundant check
dwc3_gadget_init_hw_endpoints calls dwc3_alloc_trb_pool only if epnum is not
equal to 0 or 1. Hence, rechecking it in the called function is redundant.

Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Mickael Maison dc93b41a15 usb: dwc3: Fixed a typo in comments
Fixed a typo in comments

Signed-off-by: Mickael Maison <mickael.maison@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Felipe Balbi 8e74475b0e usb: dwc3: gadget: use udc-core's reset notifier
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at
bus reset handler.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10 17:19:34 -06:00
Huang Rui 460d098cb6 usb: dwc3: make HIRD threshold configurable
HIRD threshold should be configurable by different platforms.

From DesignWare databook:
When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or
equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals
utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1.

When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than
HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:41 -06:00
Huang Rui 80caf7d21a usb: dwc3: add lpm erratum support
When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced
Configuration of coreConsultant, it supports of xHCI BESL Errata Dated
10/19/2011 is enabled in host mode. In device mode it adds the capability
to send NYET response threshold based on the BESL value received in the LPM
token, and the threhold is configurable for each soc platform.

This patch adds an entry that soc platform is able to define the lpm
capacity with their own device tree or bus glue layer.

[ balbi@ti.com : added devicetree documentation, spelled threshold
		completely, made sure threshold is only applied to
		proper core revisions. ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:36 -06:00
Felipe Balbi 22835b807e usb: gadget: remove unnecessary 'driver' argument
now that no UDC driver relies on the extra
'driver' argument to ->udc_stop(), we can
safely remove it.

This commit is based on previous work by
Robert Baldyga <r.baldyga@samsung.com> which
can be found at [1]; however that patch turned
out to have a high probability of regressing
many UDC drivers because of a blind search & replace
s/driver/$udc->driver/ which caused the 'driver'
argument to stop_activity() to be a valid non-NULL
pointer when it should be NULL, thus causing UDCs
to mistakenly call gadget driver's ->disconnect()
callback.

[1] http://markmail.org/message/x5zneg4xea4zntab

Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:16 -06:00
Felipe Balbi 73359cef4f usb: dwc3: gadget: WARN() on bogus usb_ep_queue()
Some gadget/function drivers might want to do
improper request recycling by allocating a single
request from one particular endpoint and queueing
it to another completely unrelated endpoint.

One such case was found with f_loopback.c.

To prevent such cases from happening again, let's
WARN() so we get a loud enough failure and persuade
users to report errors.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:00 -06:00
Felipe Balbi 06a374ed13 usb: dwc3: gadget: set state to NOT_ATTACHED on disconnect_irq
whenever we get a Disconnect Interrupt, we should
make sure to update out udc state to NOT_ATTACHED,
otherwise sysfs will show wrong values.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:00 -06:00
Felipe Balbi 0b0231aa24 usb: dwc3: get rid of ->prepare()/->complete()
Using ->prepare()/->complete() to mask/unmask
IRQs is wrong at least for dwc3. We need to
make sure that by the end of ->resume(), IRQs
are working and ready to fire because a child
device may need working IRQs for its own ->resume()
method.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:58 -06:00
Jack Pham 1200a82a59 usb: dwc3: gadget: Properly initialize LINK TRB
On ISOC endpoints the last trb_pool entry used as a
LINK TRB is not getting zeroed out correctly due to
memset being called incorrectly and in the wrong place.
If pool allocated from DMA was not zero-initialized
to begin with this will result in the size and ctrl
values being random garbage. Call memset correctly after
assignment of the trb_link pointer.

Fixes: f6bafc6a1c ("usb: dwc3: convert TRBs into bitshifts")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23 13:57:24 -05:00
Felipe Balbi 7a60855972 usb: dwc3: gadget: fix set_halt() bug with pending transfers
According to our Gadget Framework API documentation,
->set_halt() *must* return -EAGAIN if we have pending
transfers (on either direction) or FIFO isn't empty (on
TX endpoints).

Fix this bug so that the mass storage gadget can be used
without stall=0 parameter.

This patch should be backported to all kernels since v3.2.

Cc: <stable@vger.kernel.org> # v3.2+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-20 15:58:48 -05:00
Felipe Balbi 95aa4e8d65 usb: dwc3: gadget: hold the lock through set_wedge()'s life
Instead of releasing the lock and calling locked
versions of our set_halt() methods, let's hold
the lock all the way through and call unlocked
versions of those functions.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-20 15:58:48 -05:00
Felipe Balbi 5ad02fb813 usb: dwc3: gadget: move isoc endpoint check to unlocked set_halt
__dwc3_gadget_ep_set_halt() is the function which
handles the actual halt feature. In order to cope
with some extra cleanup comming as a follow-up patch
let's move the isochronous endpoint check there too.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-20 15:58:48 -05:00
Michal Sojka 304f7e5e1d usb: gadget: Refactor request completion
Use the recently introduced usb_gadget_giveback_request() in favor of
direct invocation of the completion routine.

All places in drivers/usb/ matching "[-.]complete(" were replaced with a
call to usb_gadget_giveback_request(). This was compile-tested with all
ARM drivers enabled and runtime-tested for musb.

Signed-off-by: Michal Sojka <sojka@merica.cz>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 16:58:50 +02:00
Felipe Balbi 4cd41ffd27 Linux 3.17-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUFjfVAAoJEHm+PkMAQRiGANkIAIU3PNrAz9dIItq8a/rEAhnx
 l2shHoOyEmyNR2apholM3BPUNX50cbsc/HGdi7lZKLkA/ifAj6B9nFD2NzVsIChD
 1QWVcvdkKlVuxXCDd26qbijlfmbTOAWrLw9ntvM+J6ZtECM6zCAZF4MAV/FwogPq
 ETGKD76AxJtVIhBMS99troAiC1YxmQ7DKgEr8CraTOR1qwXEonnPCmN/IZA6x2/G
 EXiihOuQB5me1X7k4PI0V8CDscQOn+3B2CQHIrjRB+KiTF+iKIuI8n6ORC6bpFh+
 U8UZP9wLlIG1BrUHG83pIndglIHotqPcjmtfl1WGrRr2hn7abzVSfV+g5Syo3Vg=
 =Ep+s
 -----END PGP SIGNATURE-----

Merge tag 'v3.17-rc5' into next

Linux 3.17-rc5

Signed-off-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	Documentation/devicetree/bindings/usb/mxs-phy.txt
	drivers/usb/phy/phy-mxs-usb.c
2014-09-16 09:53:59 -05:00
Felipe Balbi 2c4cbe6e5a usb: dwc3: add tracepoints to aid debugging
When we're debugging hard-to-reproduce and time-sensitive
use cases, printk() poses too much overhead. That's when
the kernel's tracing infrastructure comes into play.

This patch implements a few initial tracepoints for the
dwc3 driver. More traces can be added as necessary in order
to ease the task of debugging dwc3.

Reviewed-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 09:55:51 -05:00
Felipe Balbi 3ece0ec474 usb: dwc3: gadget: cmd argument should always be unsigned
No functional changes, just making sure we're dealing
with unsigned ints.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 09:54:00 -05:00
Felipe Balbi 80977dc99b usb: dwc3: move all string helper functions to debug.h
Those functions are only using within debugging
messages, grouping them into debug.h makes sense.

While at that, also add missing multiple inclusion
guard.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 09:53:51 -05:00
Felipe Balbi 0b93a4c838 usb: dwc3: fix TRB completion when multiple TRBs are started
After commit 2ec2a8be (usb: dwc3: gadget:
always enable IOC on bulk/interrupt transfers)
we created a situation where it was possible to
hang a bulk/interrupt endpoint if we had more
than one pending request in our queue and they
were both started with a single Start Transfer
command.

The problems triggers because we had not enabled
Transfer In Progress event for those endpoints
and we were not able to process early giveback
of requests completed without LST bit set.

Fix the problem by finally enabling Xfer In Progress
event for all endpoint types, except control.

Fixes: 2ec2a8be (usb: dwc3: gadget: always
	enable IOC on bulk/interrupt transfers)
Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 09:16:55 -05:00
Zhuang Jin Can fdee4ebac9 usb: dwc3: gadget: Fix desc NULL pointer in dwc3_gadget_ep_queue()
dep->endpoint.desc is checked at the beginning of
dwc3_gadget_ep_queue(), but after that it may be set to NULL
by another thread and then accessed again in dwc3_gadget_ep_queue().
This will lead to kernel oops.

Expand spinlock protection area to aviod race condition.

Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Jiebing Li <jiebing.li@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 15:15:55 -05:00
Jingoo Han 734d5a5393 usb: dwc3: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20 12:14:45 -05:00
Greg Kroah-Hartman 61fe2d75f1 usb: patches for v3.17 merge window
Surprisingly enough, while a big set of patches, the majority is
 composed of cleanups (using devm_*, fixing sparse errors, moving
 code around, adding const, etc).
 
 The highlights are addition of new support for PLX USB338x devices,
 and support for USB 2.0-only configurations of the DWC3 IP core.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTzTI9AAoJEIaOsuA1yqREIqcQAJbwMaDb5sp8dWst+nL1Vo8N
 08bhOOM+o2KLiIBSNQh1hYtujpa06RSQMiNYZ7F/+R4Q3OAoq+uC0dD69TLEQ3Sd
 1xi0UgUTAvtXo13TToRjIi0mYywrrkZ91Maqff5jZKdslOY4ZfAScpUQHyD3i1UO
 JNUqpayYAnp8JJIGQ8CG1wAeJh/J8JH3O607vaknKVjds+WMkeC5ubnuV4sgVw71
 8JTwxk22EkMTr2MKhHjZwcv016NMEvziinWVoTXcWN2Uwk42Dn1nhfaYWSvg7kZE
 8/3t6zzdFMdoeeTEn2xXIQGTjbHW0sBS5+S+6PAon2YbjS3x40cbyLJnZ+KoVXog
 iHDKAl5w53gd/7qMiv57dW+HRP0M7/m2iy/owIrY8H8DkM3uwFevaeq/G2raJKmA
 frB1k95bSyypN7wVkALYv4nurP5+d7ERy9hPj/49M5giJXPpEIbgKN2qGdafaEx7
 xzAI+GqYrFtmmg25+f6AQRicVczQNMCdDT8HPZ04099Z2JVY/4uOoqTl29CePMgo
 OXeQ45ECMoJuRSwpF56e8h+qmsXp6WD31IhlcHseTvUvFu0Ex4SgUJhFP2UaF9WP
 aOqz0w36yX/ME3VhQk9YImNqGoqEk6fYHIHhxfdDugt0n68+M56EiiwtKvd5v5BI
 hCJAMBrv+WCGnJvWunVW
 =aJY4
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.17 merge window

Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).

The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.

Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-07-21 11:33:41 -07:00
Jingoo Han 029d97ff54 usb: dwc3: gadget: remove unnecessary 'start_new' variable
Remove 'start_new' variable from dwc3_endpoint_transfer_complete(),
since this variable has not been used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:44:25 -05:00
Zhuang Jin Can 5cd8c48d95 usb: dwc3: gadget: check link trb after free_slot is increased
In ISOC transfers, when free_slot points to the last TRB (i.e. Link
TRB), and all queued requests meet Missed Interval Isoc error, busy_slot
points to trb0.
	busy_slot->trb0
		   trb1
		   ...
	free_slot->trb31(Link TRB)

After end transfer and receiving the XferNotReady event, trb_left is
caculated as 1 which is wrong, and no TRB will be primed to the
endpoint.

The root cause is free_slot is not increased the same way as busy_slot.
When busy_slot is increased by one, it checks if points to a link TRB
after increasement, but free_slot checks it before increasement.
free_slot should behave the same as busy_slot to make the trb_left
caculation correct.

Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Jiebing Li <jiebing.li@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19 08:51:07 -05:00
Greg Kroah-Hartman f8712528ae usb: patches for v3.16 merge window
Not a lot here during this merge window. Mostly we just have
 the usual miscellaneous patches (removal of unnecessary prints,
 proper dependencies being added to Kconfig, build warning fixes,
 new device ID, etc.
 
 Other than those, the only important new features are the
 new support for OS Strings which should help Linux Gadget
 Drivers behave better under MS Windows. Also Babble Recovery
 implementation for MUSB on AM335x. Lastly, we also have
 ARCH_QCOM PHY support though phy-msm.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTfSbVAAoJEIaOsuA1yqREGU0P/RthhfwpHVOKREnWFvUnRcNn
 MAPX1sv11gJiEs2Oe70/9YPL3ZLeV05mBgHoNUjyK5281TK9LDsUW8WwGLKbfe1u
 5JsOC+Gmk7aFMCwGfQQKVZpy4UNikpa517Bg+m9oY37rjT2BMsP32Sq1KbD47q1q
 0Ybn8iR0ZPAUDnpFc7OKyL9Ocko+AsQo1jmoR1epmhiByfDgzMPPIyE4MLv1SPXi
 VvuuWWknTD6xev9m9ELVTo+Or/RNabi04DVOBRV2Qa5csKvkILrBpnCpR0fMTlQ8
 ks8Zt0Fnwsre8/L/+HQj+2uOH3w+BDbe9qoVbkmkugZpFvrY0uFGrgGiqt8YOdiL
 mQAE+/8lOgnUU5YRTr38h0yIZ1JTHGP1yv9YZwatk65bp2R6o5k5ejf1WnzRqUhy
 HvXtILwZZiYknCCdPPEkyqpWEk8NcrLudw2k0EfU3q8JJnHeX+U4YNPhcFkjKido
 Oo+SES09gmh+UHAtC1EOtHYs8boNKhe58hL5FzyyKV8zbM2SXmYoDLyBsVyOQQJQ
 lDMKhS1+n8QLqBjZ2lypOqLuesHjk+E5iOjrXQZaEfA5eqUxaGezxOdbMkWwPLoS
 yKR/tMQ7+OVn8yKhfIyVuzFwQkxc2p4gXtsyDwui6qVVlSrim2+14d2lv5FGVZ48
 N8SCQis+ik6tShPOqccH
 =Q1jA
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.16 merge window

Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.

Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/phy/phy-mv-u3d-usb.c
2014-05-23 11:28:21 +09:00
Andy Shevchenko b09e99ee7c usb: dwc3: no need to initialize ret variable
First usage of ret variable will re-write initial value. Thus, there is no need
to initialize it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:26:21 -05:00
Felipe Balbi 427c3df684 usb: dwc3: gadget: pretty print Generic CMDs
this makes it slightly easier to read generic CMD
logs. It also helps make sure we're sending proper
parameters for each command.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:22:00 -05:00
Felipe Balbi e57ebc1db6 usb: dwc3: gadget: pretty print link states
this makes it slightly easier to read link state
change interrupt logs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:21:25 -05:00
Felipe Balbi 40cc57c71b usb: dwc3: gadget: print both cmd string and number
That way it's easy for humans looking at dmesg
and humans(?) looking at Databooks.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:10:02 -05:00
Felipe Balbi 687ef9817d usb: dwc3: gadget: clear stall when disabling endpoint
so it seems like DWC3 IP doesn't clear stalls
automatically when we disable an endpoint, because
of that, we _must_ make sure stalls are cleared
before clearing the proper bit in DALEPENA register.

Cc: <stable@vger.kernel.org> # v3.4+
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 10:30:33 -05:00
Jack Pham 32702e96a9 usb: dwc3: gadget: Iterate only over valid endpoints
Make dwc3_gadget_resize_tx_fifos() iterate only over IN
endpoints that are actually present, based on the
num_in_eps parameter. This terminates the loop so as to
prevent dereferencing a potential NULL dwc->eps[i] where
i >= (num_in_eps + num_out_eps).

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 10:11:45 -05:00
Dan Carpenter 3f89204bae usb: dwc3: gadget: remove known conditions
We know what "value" is and it upsets static checkers that we appear to
have doubts about it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-07 10:03:24 -06:00
Dan Carpenter 73a30bfc0d usb: dwc3: gadget: cut and paste fixups in suspend/resume
These were cut and paste from the ->disconnect function.

Fixes commit 30d577b9bcc4 ('usb: dwc3: gadget: call gadget driver's
->suspend/->resume')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-07 10:03:24 -06:00
Felipe Balbi b997ada5db usb: dwc3: gadget: pre-start Stream transfers when they're queued
we need to pre-start stream transfers otherwise we
will never know when to start them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi bc5ba2e0b8 usb: dwc3: gadget: call gadget driver's ->suspend/->resume
When going into bus suspend/resume we _must_
call gadget driver's ->suspend/->resume callbacks
accordingly. This patch implements that very feature
which has been missing forever.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Paul Zimmerman b992e6813e usb: dwc3: gadget: add 'force' argument to stop_active_transfer
It's not always we need to force a transfer to be removed
from the core's internal cache. This extra argument will
help differentiating those two cases.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi 356363bf6b usb: dwc3: gadget: make sure HIRD threshold is 0 in superspeed
During superspeed, HIRD threshold should always
be zero. Curent driver wasn't making sure that
was the case.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi 7b2a0368bb usb: dwc3: gadget: set KEEP_CONNECT in case of hibernation
if we have hibernation configured, Databook
instructs us to set KEEP_CONNECT bit together
with RUN_STOP bit, in step 9 of section 12.3.6.1
Initialization for Hibernation Support.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:02 -06:00
Paul Zimmerman 265b70a73a usb: dwc3: gadget: add a 'restore' argument to set_ep_config
That argument will be used in later patches when we
have working hibernation support. For now, always
pass it as false.

The idea of this patch is to decrease to size of
following patches and slowly add hibernation building
blocks to the gadget side of dwc3 so that it becomes
very easy to review the actual hibernation code.

[ balbi@ti.com : rewrote patch on top of current
	tree. Added commit log. ]

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:52 -06:00
Paul Zimmerman 911f1f88ca usb: dwc3: gadget: implement dwc3_gadget_get_link_state
This function will be used during hibernation to get
the current link state. It will be needed at least
for Hibernation support.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:51 -06:00
Felipe Balbi e1dadd3b0f usb: dwc3: workaround: bogus hibernation events
Revision 2.20a of the core has a known issue
which would generate bogus hibernation events
_and_ random failures on USB CV TD.9.23 test
case.

The suggested workaround is to ignore hibernation
events which don't match currently connected
speed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:50 -06:00
Felipe Balbi f3af36511e usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers
by setting IOC always, we can recycle TRBs a
lot sooner at the expense of some increased
CPU load.

The extra load seems to be quite minimal on
OMAP5 devices (instead of 1 IRQ for one MSC
transfer, we get
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS).

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:49 -06:00