Commit Graph

1080 Commits

Author SHA1 Message Date
Haojian Zhuang 39b70ee051 gpio: pl061: bind pinctrl by gpio request
Add the pl061_gpio_request() to request pinctrl. Create the logic
between pl061 gpio driver and pinctrl (pinctrl-single) driver.

While a gpio pin is requested, it will request pinctrl driver to
set that pin with gpio function mode. So pinctrl driver should
append .gpio_request_enable() in pinmux_ops.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 05:27:30 +01:00
Haojian Zhuang f1f70479e9 gpio: pl061: support irqdomain
Drop the support of irq generic chip. Now support irqdomain instead.

Although set_wake() is defined in irq generic chip & it is not really
used in pl061 gpio driver. Drop it at the same time.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 05:27:30 +01:00
Haojian Zhuang 86853c83e3 gpio: add gpio offset in gpio range cells property
Add gpio offset into "gpio-range-cells" property. It's used to support
sparse pinctrl range in gpio chip.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 05:27:29 +01:00
Haojian Zhuang ad4e1a7caf gpio: fix wrong checking condition for gpio range
If index++ calculates from 0, the checking condition of "while
(index++)" fails & it doesn't check any more. It doesn't follow
the loop that used at here.

Replace it by endless loop at here. Then it keeps parsing
"gpio-ranges" property until it ends.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 04:37:24 +01:00
Magnus Damm 753c5983dd gpio/em: Add Device Tree support
Update the Emma Mobile GPIO driver to add DT support.

The patch simply adds a two-cell xlate function and
updates the probe code to allow configuration via DT
using the "ngpios" property plus OF id in the same
style as gpio-mvebu.c. The code is also adjusted to
use postcore_initcall() to force early setup.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-06 09:12:26 +08:00
Jon Hunter 8d4c277e18 gpio/omap: warn if bank is not enabled on setting irq type
For OMAP devices, if a gpio is being used as an interrupt source but has
not been requested by calling gpio_request(), a call to request_irq()
may cause the kernel hang because the gpio bank may be disabled and
hence the register access will fail. To prevent such hangs, test for
this case and warn if this is detected.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-06 09:12:26 +08:00
Jon Hunter ede4d7a5b9 gpio/omap: convert gpio irq domain to linear mapping
Currently the OMAP GPIO driver uses a legacy mapping for the GPIO IRQ
domain. This is not necessary because we do not need to assign a
specific interrupt number to the GPIO IRQ domain. Therefore, convert
the OMAP GPIO driver to use a linear mapping instead.

Please note that this also allows to simplify the logic in the OMAP
gpio_irq_handler() routine, by using irq_find_mapping() to obtain the
virtual irq number from the GPIO bank and bank index.

Reported-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-06 09:12:25 +08:00
Stephen Boyd 7bce696b07 gpio: Make gpio-msm-v1 into a platform driver
Doing this removes the dependence of this driver on the
msm_iomap.h and cpu.h mach include headers provied by MSM. This
is necessary to support single zImage work in the future and
allows us to remove cpu.h entirely and brings us closer to
removing msm_iomap.h.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-05 12:05:43 -08:00
Thomas Abraham 70850ad853 gpio: samsung: skip gpiolib registration if pinctrl support is enabled for exynos5250
Skip exynos5250 gpiolib registration if pinctrl support for exynos5250
is enabled.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:59:12 +09:00
Kukjin Kim d97fedef91 gpio: samsung: fixes build warning with s3c2410_defconfig
commit 7b45ed96 ("ARM: S3C24XX: handle s3c2412 eints using new
infrastructure") introduced build warning and this patch fixes
that:

drivers/gpio/gpio-samsung.c: In function 's3c24xx_gpiolib_fbank_to_irq':
drivers/gpio/gpio-samsung.c:1126:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:36 +09:00
Heiko Stuebner 1c8408e313 ARM: S3C24XX: handle s3c2412 eints using new infrastructure
The s3c2412 handles the eints 0 to 3 different than all the other SoCs
of the 24xx range. These eints must be acked and masked in the regular
bits as well as the bits 0 to 3 of the eint registers, which are unused
on the other SoCs.

This of course can be realized using the new infrastructure with the
eint bits in the main register being the parent interrupts of the
same bits in the eint register.

The s3c2412 therefore gets its own IRQ_EINT0 to 4 constants that
reside in the newly created gap before IRQ_EINT4. gpio-samsung, as the
only user of these is modified to return the correct values when
handling gpio_to_irq requests on s3c2412 based machines.

Due to lack of hardware this is compile tested only, but should
hopefully work as intended.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:31 +09:00
Stephen Warren 165b6c2f33 gpio/tegra: assume CONFIG_OF
Tegra only supports, and always enables, device tree. Remove all ifdefs
and runtime checks for DT support from the driver.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-04 10:22:18 +08:00
Mika Westerberg e97f9b5277 gpio/gpio-ich: fix ichx_gpio_check_available() return what callers expect
ichx_gpio_check_available() returns either 0 or -ENXIO depending on whether
the given GPIO is available or not. However, callers of this function treat
the return value as boolean:

	...
	if (!ichx_gpio_check_available(gpio, nr))
		return -ENXIO;

which erroneusly fails when the GPIO is available and not vice versa.

Fix this by making the function return boolean as expected by the callers.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-02 13:20:21 +00:00
Alexandre Courbot 24d7628fe8 gpiolib: move comment to right function
This comment applies to gpio_to_chip(), not gpiod_to_chip().

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-02 13:20:20 +00:00
Alexandre Courbot def634338d gpiolib: use const parameters when possible
Constify descriptor parameter of gpiod_* functions for those that
should obviously not modify it. This includes value or direction get,
cansleep, and IRQ number query.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-02 13:20:19 +00:00
Alexandre Courbot bcabdef12d gpiolib: check descriptors validity before use
Some functions dereferenced their GPIO descriptor argument without
checking its validity first, potentially leading to an oops when given
an invalid argument.

This patch also makes gpio_get_value() more resilient when given an
invalid GPIO, returning 0 instead of silently crashing.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-02 13:20:19 +00:00
Tejun Heo 62f516b8d6 gpio: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:15 -08:00
Linus Torvalds 4c8c225abf GPIO changes for Linux 3.9
This branch contains the usual set of individual driver improvements and
 bug fixes, as well as updates to the core code. The more notable changes
 include:
 
 - Internally add new API for referencing GPIOs by gpio_desc instead of
   number. Eventually this will become a public API
 - ACPI GPIO binding support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRK77kAAoJEEFnBt12D9kBwZ0P/iJ++tvmUg9mt9qzN0Le0Q02
 TKCQpgOivxng03oTcLIQRK46PNPWdq2zDb1v5seqXKxdMjRd++WLxPxj4eRZNdqA
 J0K820KvqYSLAqEUDwqO288ciOyP6ThDfeT+SUUUCOwFHkFCVS0xYuxLjcX0evah
 pcXuIu6nev2Yo/RivgXVaVkOTVBf7ssR7rTpdkDl/RvK2BMZTfpmt4fAXdDcCb9k
 JlBeSC6Ifx6iUcl+lV+jA0PeA7vOEHBhXWqoy5ivtNPcBbPL//cz0ZdAL0jfVtgn
 17RPugskNv/s2uVJlhiyKA3kF2IzbE3pKGxyl2Teb4Xus398pqqaHPtiLNeKIiSV
 KUJRIu2mGdvb4Vyvno0e5Vll9PcUPX0uIeQ2uzrMAB7XtI4EHw7d9+qwj4qOI6Dg
 edCFNcI9zTeuU/Z3fAg/+ufdIY7muQz8OsKnh3R8fY29SVSa+6o6TT+tgX5M7tjH
 IEI11RaYQQEJSri9bAR0vE1nsFleWsoW6QljVIHLpNS/tBz/S8KYpbQ5qPNXknxf
 lgD0FzkNYPWWi9D3wNutwNeaktCacRfcCTH1Z4FzE+PmxoYeiCzf/4pjFbxU06dm
 WJ7i8E0SRrVW+cM8z7M+Lj6emqtQ5En0bg5ZTo75SM2X+9sNrWtw3UMQ7Ea4gxKM
 362n9tWp2k626DixWzBd
 =JN4M
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull GPIO changes from Grant Likely:
 "This branch contains the usual set of individual driver improvements
  and bug fixes, as well as updates to the core code.  The more notable
  changes include:

   - Internally add new API for referencing GPIOs by gpio_desc instead
     of number.  Eventually this will become a public API

   - ACPI GPIO binding support"

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
  arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
  gpio: em: Use irq_domain_add_simple() to fix runtime error
  gpio: using common order: let 'static const' instead of 'const static'
  gpio/vt8500: memory cleanup missing
  gpiolib: Fix locking on gpio debugfs files
  gpiolib: let gpio_chip reference its descriptors
  gpiolib: use descriptors internally
  gpiolib: use gpio_chips list in gpiochip_find_base
  gpiolib: use gpio_chips list in sysfs ops
  gpiolib: use gpio_chips list in gpiochip_find
  gpiolib: use gpio_chips list in gpiolib_sysfs_init
  gpiolib: link all gpio_chips using a list
  gpio/langwell: cleanup driver
  gpio/langwell: Add Cloverview ids to pci device table
  gpio/lynxpoint: add chipset gpio driver.
  gpiolib: add missing braces in gpio_direction_show
  gpiolib-acpi: Fix error checks in interrupt requesting
  gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
  gpiolib: remove gpiochip_reserve()
  arm: pxa: tosa: do not use gpiochip_reserve()
  ...
2013-02-26 09:35:29 -08:00
Linus Torvalds ab7826595e This is the MFD pull request for the 3.9 merge window.
No new drivers this time, but a bunch of fairly big cleanups:
 
 - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation,
   OMAP5 support and clock management code cleanup.
 
 - The first step of a major sync for the ab8500 driver from Lee Jones. In
   particular, the debugfs and the sysct interfaces got extended and improved.
 
 - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core
   driver, with a much needed module id lookup code improvement.
 
 - The regular wm5102 and arizona cleanups and fixes from Mark Brown.
 
 - Laxman Dewangan extended the palmas APIs in order to implement the palmas
   GPIO and rt drivers.
 
 - Laxman also added DT support for the tps65090 driver.
 
 - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and
   Darren Hart.
 
 - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based
   devices to switch to the new abx500 pin-ctrl driver.
 
 - The max8925 now has device tree and irqdomain support thanks to Qing Xu.
 
 - The recently added rtsx driver got a few cleanups and fixes for a better
   card detection code path and now also supports the RTS5227 chipset, thanks
   to Wei Wang and Roger Tseng.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJWtoAAoJEIqAPN1PVmxKHvEP/2B0uUJQpRjTjc9lgrzaUdFO
 QdSyj8Vpz1fZPF3cDuik/Be91U1nICyJWZZ7Yvngih3kbqiGw8nbp9AATwdF4Anl
 +QEtPS9YIpu1w5NS4r01q+cx3NxFsaR5yfNPKLWWnLtN8zHq4qQS8SF8jjdrsgkz
 zUJrjn1GfPPeuyR6Fuko9Mxk6oQ6TUazWJwmxzSCcrKKQ7GlAnbRWcwv2Qnv3GTg
 xi9S85xmLtVhLmMIQ2OR4JP56Vc49OL2/+hv1uShtFVDR4JLeZ5l8j0IPjgXJTrv
 ZbcrzEfJkV+zkY5RmDQrZzNLIWQmH9lj0bzitrS8Ii622J/mfnvQEgnC5fObphjg
 sYKJuBtO9o7XtFJxH7/oXdwM2gC5jDy43FmRv9J2mIDVoX8kNZMzY/sqmL8jm7KD
 MZU0D7liOyF3/1VbZHGSplKp+HKd5XYXCDQEesG/urkDr2edYHdb52iUVYGC32yV
 MaTqXnRMGURdjhCorAZPV8hoQOSWV8pj6oskk+E3upCmWjQWdhKMw3/HzasDLO9B
 eoQSgwZXJLTV8hJjAdgPUjZbxyOyW+9jKA12nyqwX3noq0NseSSJaeZUWmLecmbF
 vXcg4LAwSUycNJ0DxtWC2oEUV9jv4B+dOE7avVT6BDSvth4nzDlO9gOTtxBLcgTz
 JKrAPxY1nS4AUXJbsYTq
 =BhC1
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...
2013-02-24 20:00:58 -08:00
Linus Torvalds 81ec44a6c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
 "The most prominent change in this patch set is the software dirty bit
  patch for s390.  It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and
  the page_test_and_clear_dirty primitive which makes the common memory
  management code a bit less obscure.

  Heiko fixed most of the PCI related fallout, more often than not
  missing GENERIC_HARDIRQS dependencies.  Notable is one of the 3270
  patches which adds an export to tty_io to be able to resize a tty.

  The rest is the usual bunch of cleanups and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/module: Add missing R_390_NONE relocation type
  drivers/gpio: add missing GENERIC_HARDIRQ dependency
  drivers/input: add couple of missing GENERIC_HARDIRQS dependencies
  s390/cleanup: rename SPP to LPP
  s390/mm: implement software dirty bits
  s390/mm: Fix crst upgrade of mmap with MAP_FIXED
  s390/linker skript: discard exit.data at runtime
  drivers/media: add missing GENERIC_HARDIRQS dependency
  s390/bpf,jit: add vlan tag support
  drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency
  iucv: fix kernel panic at reboot
  s390/Kconfig: sort list of arch selected config options
  phylib: remove !S390 dependeny from Kconfig
  uio: remove !S390 dependency from Kconfig
  dasd: fix sysfs cleanup in dasd_generic_remove
  s390/pci: fix hotplug module init
  s390/pci: cleanup clp page allocation
  s390/pci: cleanup clp inline assembly
  s390/perf: cpum_cf: fallback to software sampling events
  s390/mm: provide PAGE_SHARED define
  ...
2013-02-21 17:54:03 -08:00
Linus Torvalds b274776c54 arm-soc: cleanups
A large number of cleanups, all over the platforms. This is dominated
 largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
 others moving code out of arch/arm into more appropriate subsystems.
 The clocksource and irqchip drivers are now abstracted to the point
 where platforms that are already cleaned up do not need to even specify
 the driver they use, it can all get configured from the device tree
 as we do for normal device drivers. The clocksource changes basically
 touch every single platform in the process.
 
 We further clean up the use of platform specific header files here,
 with the goal of turning more of the platforms over to being
 "multiplatform" enabled, which implies that they cannot expose
 their headers to architecture independent code any more.
 
 It is expected that no functional changes are part of the cleanup.
 The overall reduction in total code lines is mostly the result of
 removing broken and obsolete code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyKmCrR//JCVInAQIN8RAAnb/uPytmlMjn5yCksF4Mvb/FVbn/TVwz
 KRIGpCHOzyKK1q7pM8NRUVWfjW2SZqbXJFqx6zBGKSlDPvFTOhsLyyupU+Tnyu5W
 IX4eIUBwb+a6H7XDHw0X2YI8uHzi5RNLhne0A1QyDKcnuHs1LDAttXnJHaK4Ap6Y
 NN2YFt3l3ld7DXWXJtMsw5v8lC10aeIFGTvXefaPDAdeMLivmI57qEUMDXknNr7W
 Odz/Rc0/cw3BNBVl/zNHA0jw7FOjKAymCYYNUa4xDCJEr+JnIRTqizd0N/YIIC7x
 aA2xjJ3oKUFyF51yiJE6nFuTyJznhwtehc+uiMOSIkjrPLym52LEHmd7G5Yqlmjz
 oiei09qBb870q3lGxwfht9iaeIwYgQFYGfD0yW5QWArCO5pxhtCPLPH7YZNZtcQd
 ZJRSGGqT/ljBz3bm0K9OLESeeTTN7+Nxvtpiz/CD+Piegz0gWJzDYJRTzkJ3UWpA
 WTVhVQdWUeX2JrNkgM7Z3Tu8iXOe+LIEs7kVXGJZSREmIIZiRvR36UrODZtAkp9I
 7YQ+srX/uaR832pgK0RrHK0zY0psU6MmIvhYxJZFbx7keiPA9eH6drb0x7tGqcUD
 FzEUzvcZvyqppndfBi+R60H/YKAhJDEXdwxzo6dyCpPQaW1T9GnzIqXuE1zin+Aw
 X7Y8YywMbHI=
 =DvgJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...
2013-02-21 14:58:40 -08:00
Linus Torvalds b24174b0cb arm-soc: non-critical bug fixes
Bug fixes that did not make it into v3.8, mostly because they were not
 considered important enough, and in some cases because bugs only show
 up in combination with other patches destined for 3.9.
 This includes a few larger patches for GPIO on the Marvell PXA platform
 and a lot of Samsung specific bug fixes, as well as a series from Arnd
 to fix older build warnings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyI2CrR//JCVInAQKBlRAAwOc8vTQl6UHciwibXXdMfL83hH0YNwu8
 CFjnzHpvDX0YUQvW9fFPSq64CejhQumgaJYq3Te7mZW50H4hqGNqgFojPZy+2yn1
 eEIjvNrES9Sp2aJG7iT1Q9BqvWVis736W7z8kTJ6szcG5e3KGZoFNdAl9izeiHtv
 CTR9o4+XVY00eKbafVU+KJ4+/ZdptEnIWiQsg1gzImrRw/PosL/lgjYYCeRXb866
 W7qltcCdwILA8+5x4KcK9CDAQbt+G2lLsmHzH4OZ2gjZmKzvZcxTOfXxdA9439Ew
 jol5rkSAXiWcsgB4kzSx7sMGyMNim1qAu9FmhUdYqSc8UBGnGcns/QOLiGZxq9uS
 9UTkInWC9Kcy8vSIIbDBvTpEZbbA5arAuEObK2eEPWntp/UgmGiSJaQmYHY+u9yd
 BokmfSLc5g+jnQBS/H//nvPkA0ZlpknGZAovyRpjzZzYiF3LiBtsIMagYH2jVwzn
 bc633NYo5cNO9DSO8mXSG6LUJ0X5d2HrTkg7J5x9GgOr1xDaH0rFjAdCZFXSTSKu
 LVy3xehuXcHK4zbEvtgq7cjKyeIDpW0psPCXjKz4Fsreq6waPN88fHx9mVnoanII
 JY9Lq8xW/2CH8uEdPyKMss/SXdzsVIm8bR3veS3TgqZa/2maMj/EkdGmPISUUjBY
 JN48myQQSZM=
 =BbV4
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...
2013-02-21 14:54:55 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Linus Torvalds b3cdda2b4f Device tree changes for v3.9
All around device tree changes destined for v3.8. Aside from the
 documentation updates the highlights in this branch include:
 - Kbuild changes for using CPP with .dts files
 - locking fix from preempt_rt patchset
 - include DT alias names in device uevent
 - Selftest bugfixes and improvements
 - New function for counting phandles stanzas in a property
 - constify argument to of_node_full_name()
 - Various bug fixes
 
 This tree did also contain a commit to use platform_device_add instead
 of open-coding the device add code, but it caused problems with amba
 devices and needed to be reverted.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI3ZoAAoJEEFnBt12D9kBW0EP/2hTN9cS3b0CMyhh+PVUWZKu
 U+pTMbXBfomYC/9vWEBEpnYQSZuBXA+Sow3ubkRk6p6qjwYi0NUuAE4reQHLwvji
 u9nL7v9WNr4WXqUpMSgSzoxzPkvr2mfrHWRU2adaKpr+p4UvjbYNG1SxppqTJGji
 HThYNsgfdFzNvO7xtFTJGpMe3UhWfazdnVc/rg1csqex2UCZMqmSf1VjNqQIGt+t
 zH6jcCSZY96rX9f+HgdL9rvZyGSjDSIHRllpuG+8u5N3N1CSzbKPe4zSia3mlsC3
 g6g3bOihGJYeG2sc1RzHSdI6ANCn3RTuuA4xQBe/xCKvZIMRNNtzsf2Kbbah0ISG
 NW1WW3KRnq85sEdwv9gtFeMoalZ/sTV1O9m3vG9Xz2XgzWgf7c0V/7ukpFuTpQby
 NiFoTbc7K2E8J/fa8NhKfR4myzNKr3peJ6mJEMMn6PkdQwnOh1AC9l5iuDzMsdvk
 IGY8YvR1qY32IW68E42JQdteZP45EBzEgD9NjU7gRGI6nu2g5czv/VFztjiom4qd
 XahvdsfuVlCitRG8g2CHgBtEsjStYUmCa+gnIoycX7HhMShwYRX/cxA7Yife2UGV
 k+GUKCkGpHOLIoiAEHq+BdEv7amuJsqglJ5kvjL01m80k7JDGJqq8H9UUZ6yOCqe
 iXERO1R4HezNVFtMDrLO
 =Zlkx
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree changes from Grant Likely:
 "All around device tree changes destined for v3.8.  Aside from the
  documentation updates the highlights in this branch include:

   - Kbuild changes for using CPP with .dts files
   - locking fix from preempt_rt patchset
   - include DT alias names in device uevent
   - Selftest bugfixes and improvements
   - New function for counting phandles stanzas in a property
   - constify argument to of_node_full_name()
   - Various bug fixes

  This tree did also contain a commit to use platform_device_add instead
  of open-coding the device add code, but it caused problems with amba
  devices and needed to be reverted."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits)
  Revert "of: use platform_device_add"
  kbuild: limit dtc+cpp include path
  gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
  of: Create function for counting number of phandles in a property
  of/base: Clean up exit paths for of_parse_phandle_with_args()
  of/selftest: Use selftest() macro throughout
  of/selftest: Fix GPIOs selftest to cover the 7th case
  of: fix recursive locking in of_get_next_available_child()
  documentation/devicetree: Fix a typo in exynos-dw-mshc.txt
  OF: convert devtree lock from rw_lock to raw spinlock
  of/exynos_g2d: Add Bindings for exynos G2D driver
  kbuild: create a rule to run the pre-processor on *.dts files
  input: Extend matrix-keypad device tree binding
  devicetree: Move NS2 LEDs binding into LEDs directory
  of: use platform_device_add
  powerpc/5200: Fix size to request_mem_region() call
  documentation/devicetree: Fix typos
  of: add 'const' to of_node_full_name parameter
  of: Output devicetree alias names in uevent
  DT: add vendor prefixes for Renesas and Toshiba
  ...
2013-02-20 11:04:46 -08:00
Linus Torvalds 8a3a11f91d These are the main pinctrl changes for the v3.9 merge window:
- Grabbing of default pinctrl handles from the device core.
   These are the hunks hitting drivers/base. All is ACKed by
   Greg, after a long discussion about different alternatives.
 
 - Some stuff also touches the MFD and ARM SoC trees, this has
   been coordinated and ACKed.
 
 - New drivers for:
 
   - The Tegra 114 sub-SoC
   - Allwinner sunxi
   - New ABx500 driver and sub-SoC drivers for AB8500,
     AB8505, AB9540 and AB8540.
 
 - Make it possible for hogged pins to enter a sleep mode,
   and make it possible for drivers to control that mode.
 
 - Various clean-up, extensions and device tree support to
   various pin controllers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRHqYQAAoJEEEQszewGV1zsBwQAIDM3MYW6sJcNd+Ekcli8dqv
 2dpzs3c4R9j3Ea0IUS3YRrk8pXeKIw6Ko0ifzFFLPF6s7kuBv1VaNdx7U8wbtoCj
 ZprMmvWTJZvD4zP8WsT9TIgGcCiQQnHbz8jyucGgMUNuwt/S0f5FeQc2mQtZGklT
 yuZ0z9eHQjqkX12ijI+lO5RI+Sduvd/FQgGIbhfoyBEMFwklTq3ePvmH5MUUMzXb
 2uNSvACbnBUkvZlYLGlr5J5w6euqX7oxUnHEf2nBt2L8d0zgP2WC2tonLLwEtzD0
 jcl3NA57eJa42PoQlNL6jZLz0kNWcGRfurstUO7UiFJ0lSxiwjYLGBqB5vfEdjAV
 wg0BokJ1vigrzUUdNPEIh6QFSrXs0I76oAMmHbXxJjnEPwahn5forYpU3G6GmCy4
 ZsTMJgXqrJeolqcDY583M31Lx0lu8/OwMjG6OBnDRCbhzq3bJgF/Nhu9nzmShFN7
 3z+NK0zBzECylV31eygyoU4SUQduYrV2YEav0QNRiZWfi3HBNcEiZGBJxUvv7+cc
 lYox6CPLCZN0Xn9y2Jt3uLNeivdjQLAJRPWnLaFtq0i4EjqpTtQnzw5LLsIqhumc
 9BhhoZ6ktPnp9CK6gQOy+dwJPiigCrqog5oCqLArI0UvRrE7BNkHrjRay8PkMqRC
 Fl4x7eR3fVfENExogGac
 =SQ9W
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...
2013-02-20 09:23:30 -08:00
Magnus Damm c7886b1827 gpio: em: Use irq_domain_add_simple() to fix runtime error
Adjust the gpio-em.c driver to reconsider the pdata->irq_base
variable. Non-DT board code like for instance board-kzm9d.c
needs to operate of a static IRQ range for platform devices.

So this patch is updating the code to make use of the function
irq_domain_add_simple() instead of irq_domain_add_linear().

Fixes a EMEV2 / KZM9D runtime error caused by the following commit:
7385500 gpio/em: convert to linear IRQ domain

Cc: stable@kernel.org
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-14 17:44:37 +01:00
Heiko Carstens 29bde2d932 drivers/gpio: add missing GENERIC_HARDIRQ dependency
The VIA VX855/VX875 GPIO and RDC R-321x GPIO support drivers select
MFD_CORE which itself depends on GENERIC_HARDIRQ support.
So add this dependency to these two drivers as well to prevent
selection of MFD_CORE.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:25 +01:00
Laxman Dewangan 3d50a27852 gpio: palmas: Add support for Palmas GPIO
Add gpio driver for TI Palmas series PMIC. This has 8 gpio which can
work as input/output.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:22:45 +01:00
Grant Likely e80beb27d2 gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
This patch replaces the horribly coded of_count_named_gpios() with a
call to of_count_phandle_with_args() which is far more efficient. This
also changes the return value of of_gpio_count() & of_gpio_named_count()
from 'unsigned int' to 'int' so that it can return an error code. All
the users of that function are fixed up to correctly handle a negative
return value.

v2: Split GPIO portion into a separate patch

Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
2013-02-13 10:11:53 +00:00
Chen Gang e9a65bb63e gpio: using common order: let 'static const' instead of 'const static'
'const static ' is not a common order, better to use 'static const' instead.

building:
  make EXTRA_CFLAGS=-W ARCH=arm

  drivers/gpio/gpio-omap.c:1479:
    warning: 'static' is not at beginning of declaration
  drivers/gpio/gpio-omap.c:1485:
    warning: 'static' is not at beginning of declaration
  drivers/gpio/gpio-omap.c:1491:
    warning: 'static' is not at beginning of declaration

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-11 22:21:29 +00:00
Tony Prisk 9f01d30ee1 gpio/vt8500: memory cleanup missing
This driver is missing a .remove callback, and the fail path on
probe is incomplete.

If an error occurs in vt8500_add_chips, gpio_base is not unmapped.
The driver is also ignoring the return value from this function so
if a chip fails to register it completes as successful.

Replaced pr_err with dev_err in vt8500_add_chips since the device is
available.

There is also no .remove callback defined so the function is added.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-11 22:21:29 +00:00
Grant Likely 362432aed5 gpiolib: Fix locking on gpio debugfs files
The debugfs files really need to hold the gpiolib spinlock before
accessing the list. Otherwise chip addition/removal will cause an oops.

Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-11 22:21:28 +00:00
Alexandre Courbot 6c0b4e6c85 gpiolib: let gpio_chip reference its descriptors
Add a pointer to the gpio_chip structure that references the array of
GPIO descriptors belonging to the chip, and update gpiolib code to use
this pointer instead of the global gpio_desc[] array. This is another
step towards the removal of the gpio_desc[] global array.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.orh>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-11 22:21:28 +00:00
Alexandre Courbot 372e722ea4 gpiolib: use descriptors internally
Make sure gpiolib works internally with descriptors and (chip, offset)
pairs instead of using the global integer namespace. This prepares the
ground for the removal of the global gpio_desc[] array and the
introduction of the descriptor-based GPIO API.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[grant.likely: Squash in fix for link error when CONFIG_SYSFS=n]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-11 22:20:55 +00:00
Alexandre Courbot 83cabe33eb gpiolib: use gpio_chips list in gpiochip_find_base
Re-implement gpiochip_find_base using the list of chips instead of the
global gpio_desc[] array. This makes it both simpler and more efficient,
and is needed to remove the global descriptors array.

The new code should preserve the exact same GPIO number assignment
policy as the code it is replacing. There shouldn't be any visible
change to the assigned GPIO numbers.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[grant.likely: Added comment about assignment policy]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 10:07:10 +00:00
Alexandre Courbot cb1650d4e0 gpiolib: use gpio_chips list in sysfs ops
This makes the code both simpler and faster compared to parsing the GPIO
number space.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 09:30:17 +00:00
Alexandre Courbot 125eef96f6 gpiolib: use gpio_chips list in gpiochip_find
Using the GPIO chips list is much faster than parsing the entire GPIO
number space.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 09:23:30 +00:00
Alexandre Courbot 65493e3ac4 gpiolib: use gpio_chips list in gpiolib_sysfs_init
Use the small list of GPIO chips instead of parsing the whole GPIO
number space.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 09:22:21 +00:00
Alexandre Courbot 1a989d0f1d gpiolib: link all gpio_chips using a list
Add a list member to gpio_chip that allows all chips to be parsed
quickly. The current method requires parsing the entire GPIO integer
space, which is painfully slow. Using a list makes many chip operations
that involve lookup or parsing faster, and also simplifies the code. It
is also necessary to eventually get rid of the global gpio_desc[] array.

The list of gpio_chips is always ordered by base GPIO number to ensure
chips traversal is done in the right order.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 09:20:12 +00:00
Michał Mirosław 9f3b795a62 driver-core: constify data for class_find_device()
All in-kernel users of class_find_device() don't really need mutable
data for match callback.

In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c)
this patch changes match callbacks to use const search data.

The const is propagated to rtc_class_open() and power_supply_get_by_name()
parameters.

Note that there's a dev reference leak in suspend_test.c that's not
touched in this patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 12:18:56 -08:00
Grant Likely 0fa2fd9a0d Merge branch 'linusw/devel' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git into gpio/next
Device driver features, cleanups and bug fixes.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:37:46 +00:00
David Cohen 46ebfbc374 gpio/langwell: cleanup driver
This patch cleans up cosmetic issues, remove useless functions and add
to_lnw_priv() macro to replace many usages of container_of().

Signed-off-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:33:30 +00:00
David Cohen 936cb1b125 gpio/langwell: Add Cloverview ids to pci device table
Adds support for new Cloverview hardware.

Signed-off-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:33:30 +00:00
Mathias Nyman 1d09aaa6a3 gpio/lynxpoint: add chipset gpio driver.
Add gpio support for Intel Lynxpoint chipset.

Lynxpoint supports 94 gpio pins which can generate interrupts.
Driver will fail requests for pins that are marked as owned by ACPI, or
set in an alternate mode (non-gpio).

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:33:29 +00:00
Olof Johansson 5b399db0b7 Merge branch 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
AS I commented, this makes <mach/*.h> local so that they could be removed.

* 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits)
  ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled
  ARM: S3C64XX: make regs-syscon-power.h local
  ARM: S3C64XX: make regs-sys.h local
  ARM: S3C64XX: make regs-srom.h local
  ARM: S3C64XX: make regs-modem.h local
  ARM: S3C64XX: make regs-gpio-memport.h local
  ARM: S3C64XX: make crag6410.h local
  ARM: S3C24XX: remove dsc.c and make regs-dsc.h local
  ARM: S3C24XX: remove idle.h
  ARM: S3C2412: cleanup regs-s3c2412.h
  ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h
  ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local
  ARM: S3C24XX: make otom-map.h local
  ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
  ARM: S3C24XX: make h1940.h and h1940-latch.h local
  ARM: S3C24XX: make gta02.h local
  ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
  ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local
  ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h
  ARM: SAMSUNG: cleanup mach/regs-audss.h file
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04 21:49:29 -08:00
Alexandre Courbot 476171ce78 gpiolib: add missing braces in gpio_direction_show
Add missing braces in an if..else condition.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-04 21:46:56 +01:00
Mathias Nyman 1107ca104f gpiolib-acpi: Fix error checks in interrupt requesting
Print error message if requesting an interrupt fails.
Use int instead of unsigned for interrupts in case of error values

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-04 21:41:47 +01:00
Anatolij Gustschin de0ccf7881 gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
Exporting gpios over sysfs GPIO interface throws genirq
error messages, i.e. on an mpc5121 based board exporting
GPIO 5 triggers it:

    # echo 229 > /sys/class/gpio/export
    genirq: Setting trigger mode 0 for irq 44 failed
    (mpc512x_irq_set_type+0x0/0x18c)

Similar error messages appear in the kernel boot log since the
board specifies GPIOs for matrix keypad and also SD Card write
protect and card detect GPIOs in its device tree. For all these
GPIOs there is an error message in the log.

The issue is triggered by setting the irq type to IRQ_TYPE_NONE
in the driver's irq_domain map function mpc8xxx_gpio_irq_map().

...
  mpc8xxx_gpio_irq_map
    irq_set_irq_type
      __irq_set_trigger

__irq_set_trigger() calls irq_set_type() callback of the mpc8xxx gpio
irq chip with the IRQ_TYPE_NONE in its 'flags' argument. This callback
is either mpc8xxx_irq_set_type() or mpc512x_irq_set_type(). Both these
functions return -EINVAL in the case if IRQ_TYPE_NONE is passed in the
flow_type argument. This return value triggers the observed error
message in __irq_set_trigger(). Modifying these callbacks to not
return an error in IRQ_TYPE_NONE case doesn't make any sense to me.
The line setting IRQ_TYPE_NONE type has been originally added by
commit 345e5c8a "powerpc: Add interrupt support to mpc8xxx_gpio".
At this time set_irq_type() checked its type argument and returned 0
if the type argument didn't specify any meaningful type in its type
sense bits (and thus was equal to IRQ_TYPE_NONE). Effectively this
line was a nop and I wonder what was the point of adding it.

Remove IRQ_TYPE_NONE setting in the irq_domain mapping function.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-04 21:41:46 +01:00
Alexandre Courbot 710b40eac4 gpiolib: remove gpiochip_reserve()
gpiochip_reserve() has no user and stands in the way of the removal of
the static gpio_desc[] array. Remove this function as well as the now
unneeded RESERVED flag of struct gpio_desc.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-04 21:41:46 +01:00
Linus Walleij a718ff6f9b gpio: delete AB8500 driver
The AB8500 GPIO driver has been marked BROKEN for ages, and we
have something better in store: a shiny new pinctrl driver. So
let use delete this old driver as the first step.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 20:42:14 +01:00
Gwenhael Goavec-Merou 66d7990e28 gpio: mxs: Add IRQ_TYPE_EDGE_BOTH support
This patch adds support for IRQ_TYPE_EDGE_BOTH needed for some driver
(gpio-keys).

Inspired from gpio-mxc.c

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29 12:02:05 +01:00
Mathias Nyman 0d1c28a449 gpiolib-acpi: Add ACPI5 event model support to gpio.
Add ability to handle ACPI events signalled by GPIO interrupts.

ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
handled by ACPI event methods which need to be called from the GPIO
controller's interrupt handler. acpi_gpio_request_interrupt() finds out which
gpio pins have acpi event methods and assigns interrupt handlers that calls
the acpi event methods for those pins.

Partially based on work by Rui Zhang <rui.zhang@intel.com>

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29 11:47:06 +01:00
Kukjin Kim b533c8685b ARM: dts: fix compatible value for exynos pinctrl
Fix the incorrect compatible property value of pinctrl for EXYNOS4 SoCs.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-28 14:27:50 -08:00
Thomas Abraham f692543287 ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
Fix the incorrect compatible property value of pin-controller module
EXYNOS5440 SoC.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: fixed it in gpio together for exynos5440]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-28 14:27:49 -08:00
Linus Walleij b42748c970 gpio: pca953x: use managed resources
Using the devm_* managed resources the pca driver can be simplified
and cut down on boilerplate code.

[gcl: fixed a inccorect reference to a removed label, "goto fail_out"
became "return ret"]

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28 11:17:04 +01:00
Gregory CLEMENT 0e8f2fdacf gpio: pca953x: use simple irqdomain
This switches the legacy irqdomain to the simple one, which will
auto-allocate descriptors, and also make sure that we use
irq_create_mapping() in the to_irq function. Also use the map function
of irq_domain_ops to setup the irq configuration on demand and no more
statically during the initialization of the driver.

Based on a initial patch from Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28 11:15:31 +01:00
Greg Kroah-Hartman 422d26b6ec Merge 3.8-rc5 into driver-core-next
This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 21:06:30 -08:00
Haojian Zhuang 6c7e660a27 gpio: pxa: set initcall level to module init
gpio & pinctrl driver are used together. The pinctrl driver is already
launched before gpio driver in Makefile. So set gpio driver to module
init level. Otherwise, the sequence will be inverted.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25 10:51:12 +01:00
Gregory CLEMENT 89f5df01c6 gpio: pca953x: add support for pca9505
Now that pca953x driver can handle GPIO expanders with more than 32
bits this patch adds the support for the pca9505 which cam with 40
GPIOs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25 09:03:40 +01:00
Gregory CLEMENT f5f0b7aa89 gpio: pca953x: make the register access by GPIO bank
Until now the pca953x driver accessed all the bank of a given register
in a single command using only a 32 bits variable. New expanders from
the pca53x family come with 40 GPIOs which no more fit in a 32
variable. This patch make access to the registers more generic by
relying on an array of u8 variables. This fits exactly the way the
registers are represented in the hardware.

It also adds helpers to access to a single register of a bank instead
of reading or writing all the banks for a given register.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25 09:02:10 +01:00
Thierry Reding 641d03422a gpio: Convert to devm_ioremap_resource()
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 11:41:56 -08:00
Haojian Zhuang 5985d76cc1 gpio: pl061: set initcall level to module init
Replace subsys initcall by module initcall level. Since pinctrl
driver is already launched before gpio driver. It's unnecessary
to set gpio driver in subsys init call level.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22 10:43:15 +01:00
Shawn Guo 6a89a314ab gpio: devm_gpio_* support should not depend on GPIOLIB
Some architectures (e.g. blackfin) provide gpio API without requiring
GPIOLIB support (ARCH_WANT_OPTIONAL_GPIOLIB).  devm_gpio_* functions
should also work for these architectures, since they do not really
depend on GPIOLIB.

Add a new option GPIO_DEVRES (enabled by default) to control the build
of devres.c.  It also removes the empty version of devm_gpio_*
functions for !GENERIC_GPIO build from linux/gpio.h, and moves the
function declarations from asm-generic/gpio.h into linux/gpio.h.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22 10:23:35 +01:00
Kees Cook 4c0ea23377 drivers/gpio: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:52:42 -08:00
Haojian Zhuang ef5e3eef6b gpio: use pinctrl device name for add range
gpiochip_add_pin_range() needs pinctrl device name as parameter.
Currently the parameter is pinctrl description name. So fix it.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-21 15:16:22 +01:00
Thierry Reding 11c0ceec07 gpio: mvebu: Don't free chip label memory
The gpio_chip.label field is a const char * and assigned the value of a
call to dev_name(). Memory obtained from dev_name() should not be freed
by drivers.

Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 12:27:08 +01:00
Kukjin Kim 6948ce588b gpio: samsung: skip gpio lib registration for EXYNOS5440
Since exynos5440 can support pinctrl so skip the legacy
gpiolib registration. If not, happens following.

WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c()
Unknown SoC in gpio-samsung, no GPIOs added

Acked-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 11:53:54 +01:00
Peter Ujfalusi c111feabe2 gpio: twl4030: Cache the direction and output states in private data
Use more coherent locking in the driver. Use bitfield to store the GPIO
direction and if the pin is configured as output store the status also in a
bitfiled.
In this way we can just look at these bitfields when we need information
about the pin status and only reach out to the chip when it is needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 11:48:12 +01:00
Peter Ujfalusi 72c7901ef0 gpio: twl4030: Introduce private structure to store variables needed runtime
Move most of the global variables inside a private structure and allocate
it dynamically.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 11:48:12 +01:00
Kukjin Kim dcb9c3491a gpio: samsung: silent build warning for EXYNOS5 SoCs
This patch fixes following warning:

drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable]

Because current gpio-samsung is valid only on EXYNOS5250.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 09:18:02 +01:00
Kukjin Kim e4a5da51da gpio: samsung: fix pinctrl condition for exynos and exynos5440
Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG,
it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work
for supporting pinctrl on most Samsung SoCs including S3C, S5P as well
except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-17 09:17:59 +01:00
Kukjin Kim 0a2691dade ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h
remove <mach/gpio-fns.h>, <mach/gpio-track.h> and <plat/gpio-fns.h>

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:22 -08:00
Kukjin Kim 9b89cb8172 gpio: samsung: remove inclusion <mach/regs-clock.h>
The <mach/regs-clock.h> is not needed for gpio-samsung.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-10 13:03:31 +01:00
Tony Prisk ebe5a0596f gpio: vt8500: Export dedicated GPIO before multifunction pins.
The vendor does not provide numbering for gpio pins. Vendor source
exports dedicated gpio pins first, followed by multifunction pins.
As this is what end users expect, this patch changes vt8500 and wm8505
to do the same.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-10 11:45:35 +01:00
Greg Kroah-Hartman 0fe763c570 Drivers: misc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Gregory CLEMENT bc1008cf7d gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
When building without device tree support (for the mv78x00 SoCs for
example), the build failed because of_irq_count is undeclared. However
mvebu-gpio is not designed to build without device tree support. So
make it depends on OF_CONFIG, remove the #ifdef OF_CONFIG line and the
platform_device_id.

Tested on RD-78x00-mASA, DB-78460-BP, DB-88F6710-BP-DDR3,
DB-MV784MP-GP, Mirabox and OpenBlocks AX3.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19 22:15:14 +00:00
Jean Delvare d39a948fef gpio/ich: Add missing spinlock init
As reported by CONFIG_DEBUG_SPINLOCK=y.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19 22:13:08 +00:00
Linus Torvalds 2dfea3803d This is the MFD patch set for the 3.8 merge window.
We have several new drivers, most of the time coming with their sub devices
 drivers:
 
 - Austria Microsystem's AS3711
 - Nano River's viperboard
 - TI's TPS80031, AM335x TS/ADC,
 - Realtek's MMC/memstick card reader
 - Nokia's retu
 
 We also got some notable cleanups and improvements:
 
 - tps6586x got converted to IRQ domains.
 - tps65910 and tps65090 moved to the regmap IRQ API.
 - STMPE is now Device Tree aware.
 - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ
   APIs and a conversion to the recently added PWM framework.
 - sta2x11 gained regmap support.
 
 Then the rest is mostly tiny cleanups and fixes, among which we have Mark's
 wm5xxx and wm8xxx patchset.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQznPnAAoJEIqAPN1PVmxKuA8P/0nOJduXFM1c0Gy+DD5DnJnG
 cXzzeSTV8iO3a3sHIye43QPJ5V2YUR5uxLTUEOo/G7my/MoZ/azeNidkUD3qLVlm
 wVIq35lcS8dWTZaY7nlpBcWc6e39UB0sEueuJNxyhOv5lnMKdi2tAow5f4vIRQnd
 Q67/EbrgqdltcOpGmVuCdQcvphvWgy+K65jzbJG5zXs7hGX13Q+M5RnYhx76kc8f
 TDd0APZ71n5/RyISFSBSu2vfl2kES6o47aMgqqXMEHri6d3puAaXM0rFoMzXg/4G
 eBdxndN25H7rW7xvt9tuUod2rn1AO7tif5d7jal3Cfj61y3iqKY30yb3OzS9XQXH
 9WZ2qDst11zvzQivxIkMGvfRXRfncNLWR4DrBSqVfSbYV2uQj2eS8C6ONwKVMXsQ
 5tjNp91PFqN19sWQjIjSMcrNswxgpvdQ9mqFTyOGmISbqrpPSTi+MuO8r9+xTfUF
 PnzUX2nVOW/i9NcI7uotjzh8jiw6t8XMVHhkehiSYR9hzCb6MaPsFPN4jWq9XA2m
 1htCHylNpHqHQ3Mup7Is6j0Li1ahdwfm4lbrgiVEA4t4Mqs5E/Ka+3V8laNAKylW
 PfCP/VmnJYzmgVTK/qobFNeKzRqR0i4WTL6T7oAxGL87Q4TJaqKpEkXWne8UXV+Q
 yIbN0fmWfCveCetM+vaf
 =F790
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS update from Samuel Ortiz:
 "This is the MFD patch set for the 3.8 merge window.

  We have several new drivers, most of the time coming with their sub
  devices drivers:

   - Austria Microsystem's AS3711
   - Nano River's viperboard
   - TI's TPS80031, AM335x TS/ADC,
   - Realtek's MMC/memstick card reader
   - Nokia's retu

  We also got some notable cleanups and improvements:

   - tps6586x got converted to IRQ domains.
   - tps65910 and tps65090 moved to the regmap IRQ API.
   - STMPE is now Device Tree aware.
   - A general twl6040 and twl-core cleanup, with moves to the regmap
     I/O and IRQ APIs and a conversion to the recently added PWM
     framework.
   - sta2x11 gained regmap support.

  Then the rest is mostly tiny cleanups and fixes, among which we have
  Mark's wm5xxx and wm8xxx patchset."

Far amount of annoying but largely trivial conflicts.  Many due to
__devinit/exit removal, others due to one or two of the new drivers also
having come in through another tree.

* tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits)
  mfd: tps6507x: Convert to devm_kzalloc
  mfd: stmpe: Update DT support for stmpe driver
  mfd: wm5102: Add readback of DSP status 3 register
  mfd: arizona: Log if we fail to create the primary IRQ domain
  mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ
  mfd: tps80031: Add terminating entry for tps80031_id_table
  mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask()
  mfd: wm5102: Add tuning for revision B
  mfd: arizona: Defer patch initialistation until after first device boot
  mfd: tps65910: Fix wrong ack_base register
  mfd: tps65910: Remove unused data
  mfd: stmpe: Get rid of irq_invert_polarity
  mfd: ab8500-core: Fix invalid free of devm_ allocated data
  mfd: wm5102: Mark DSP memory regions as volatile
  mfd: wm5102: Correct default for LDO1_CONTROL_2
  mfd: arizona: Register haptics devices
  mfd: wm8994: Make current device behaviour the default
  mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ
  mfd: Fix stmpe.c build when OF is not enabled
  mfd: jz4740-adc: Use devm_kzalloc
  ...
2012-12-16 18:55:20 -08:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Linus Torvalds 698d601224 ARM: arm-soc: driver specific changes
A collection of mostly SoC-specific driver updates:
 - a handful of pincontrol and setup changes
 - new drivers for hwmon and reset controller for vexpress
 - timing support updates for OMAP (gpmc and other interfaces)
 - + a collection of smaller cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySxPAAoJEIwa5zzehBx3NbgP/iI1EFKI8fK6tp7F1EeTwDYK
 tKeKFmx+Lio2z5OF0CS0qK0HODtcS2ifJ5Zz3C9VyiRBNDOuYAvDT+5bIAKsKIo3
 p0mZyYvgdbcxH30EhYY8klaUVwRyc1noxdO8vENdzoAik4EwUv5zXEKAlcBfScrA
 usCW0dhGJYKH73kgLKQvsyE9d/aV0hbcniSYoVHH1G4e6U5vG45y8pqeSrTQxfCP
 nG177/AheoCHoyoh/td0lmkAJsmXM7NpvdJTaAwKgOmEXvOCUwAcuOgOCEuc7sd/
 FG3jGLntcB9z0AtbO/YOl3+110o71KBF7gYrDDEjLD6U7zz7yhcmhGVh+FEnVa0I
 ppgReNN3jZOs7HVlDTvTXLdh5cjZU5JIpLOmHWdERAwkxakDCd07KzPo5g44XTyO
 CzZuqVFU2JNliIujoJHL2Trnj7Q54fWcgHWkWJdWBhJMsxC42xWgaukCaLDHNuBX
 Po5cqOnEnAYA0rgvQxfdfPWzJd/NN/kU/ewun0pwni3+PlzhfxFzTRcLcj4BT4By
 1S2foQUt0CVkswgFdkRlbGolSsXIlOQmKvsd8kvzldDUzn+0cxgwYHzg4T29hlmY
 zv0+sfgSxub68zfodDtdyjBWDCgrSHrf3TGjGD/4/X6Bm9Ss3hRj4LHIM7Z2BX7F
 PJgvGjAZIfuZThLkShLa
 =CwMf
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Olof Johansson:
 "A collection of mostly SoC-specific driver updates:
   - a handful of pincontrol and setup changes
   - new drivers for hwmon and reset controller for vexpress
   - timing support updates for OMAP (gpmc and other interfaces)
   - plus a collection of smaller cleanups"

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: ux500: fix pin warning
  ARM: OMAP2+: tusb6010: generic timing calculation
  ARM: OMAP2+: smc91x: generic timing calculation
  ARM: OMAP2+: onenand: generic timing calculation
  ARM: OMAP2+: gpmc: generic timing calculation
  ARM: OMAP2+: gpmc: handle additional timings
  ARM: OMAP2+: nand: remove redundant rounding
  gpio: samsung: use pr_* instead of printk
  ARM: ux500: fixup magnetometer pins
  ARM: ux500: add STM pin configuration
  ARM: ux500: 8500: add pinctrl support for uart1 and uart2
  ARM: ux500: cosmetic fixups for uart0
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
  ARM: ux500: 8500: define SDI sleep states
  ARM: vexpress: Reset driver
  ARM: ux500: 8500: update SKE keypad pinctrl table
  hwmon: Versatile Express hwmon driver
  ARM: ux500: delete duplicate macro
  ARM: ux500: 8500: add IDLE pin configuration for SPI
  ...
2012-12-13 10:59:11 -08:00
Linus Torvalds db5b0ae007 ARM: arm-soc: device tree conversions and enablement
Continued device tree conversion and enablement across a number of
 platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
 smaller series as well.
 
 ux500 has seen continued conversion for platforms. Several platforms have
 seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra
 is adding data for new devices/drivers, and Exynos has a bunch of new
 bindings and devices added as well.
 
 So, pretty much the same progression in the right direction as the last
 few releases.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySW7AAoJEIwa5zzehBx39xcP/jzEQOTOJdK4zJd1OjgrQoX/
 WnhbGJT941RNjRjvDG6HmZzhpsRoE4q/zkjFEKoKELdikRW0hYoR+zPCGuB7XtN5
 aF1ZQrTx4gHf4KE7doIB8slaWeOq8aG2TLFhylyy+cuaIpRK0NG0pAR0ZqWaoga9
 tZFciqzplLeo50vZ+y+lVVsR40j/w29EjwPXhCV30//gGOYLyp/VDu5PRtrBdgh8
 EgpcT2EWJwMCN/Upcao/q2JbQktPHPpSwnpaUAALYB20uD7k5jo7wtYE/+L9nn6B
 bxcCDTMVmqzNTF+y0P16hDcs5jMLVjpI0xBiyZ1G6gShpggsSZCHY5ynjAtQ19se
 r+2WrNfOR23k6arJuOUAQSEnLdx0T5SlW6CJeFEofKv4uoebxAbKUiNO4ShWskhd
 nNptX1+L3hj3zpjGcEHmL6bd+nGtyMeoG9Yekcv1oZxdVcpKhFxh0s5PEJBEeXcN
 M7aAWlWJkplV22Olqhpc/3INCweq6E+zBrBxZaUBW/JCzGrqBUGC0BULDPAkmC4J
 CKL6IqIB73jGQ4OY14IaMU20GJrIGxZ7wzXOp4aw3OUpRlxsgurfyFQeIjUvVoZL
 PJ8DRoAVwreVHvKfgZZVKpSAY7dwcWbxpWsYlrH3zWIC5vRJ0UFwsD0TpLJWd6Vi
 XA8gQcJRWKGS8E5mRY39
 =Rk9v
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...
2012-12-13 10:39:26 -08:00
Linus Torvalds d01e4afdbb ARM: arm-soc: Cleanups on various subarchitectures
Cleanup patches for various ARM platforms and some of their associated
 drivers. There's also a branch in here that enables Freescale i.MX to be
 part of the multiplatform support -- the first "big" SoC that is moved
 over (more multiplatform work comes in a separate branch later during
 the merge window).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2p9AAoJEIwa5zzehBx3aPUQAIjV3VDf/ACkA4KUQu0BFg5U
 57OIkl6RCZvfKhYgq5+6OJ2AK6VkGh9PqTmXkDS7Nj3QMS/uWcb3U419aPJsd3Z/
 vNGpTl+J/YcAcFrKMqTyNv98TAiAOJlpm70CqmRbkhpMfoJb7//1JKqGTJPBO+tj
 8ZEwNGC0WbRNOSQTY/TTAhbZE1sqXwKy9mDLGmcwqKBY8H1TFHyPB6yWYFSxMHxS
 JAegbYhYO9FawOOLoi9ovT+2vUR9vDu0xxV4zUK9f5DqKcCb/wYuN0QkusjnEutm
 RfIt7iXHHzi35YPxtlrGgSz9EIYXKAafSzkgf3Ydpjci5DH/vbVexm/CT+V+SwOT
 SvucYJMALI/aOEFJWN/50L6B9zipSrWb51tK7WFXz/sUCrMQrXH3Mu99mjHZXSoL
 1cylsvs3DFQC7vHFLSjRpX6eJdfE+Hb0LZ878eXSbDVCOnU8odAQrofugqfmeVDk
 eN0+BWmchJgvljOiKVUQMC3PCquCaAAO1lm/HU7bWPlVigTuHSW0uisDyCYAtlt1
 dGxnbbhoFJvSH7CMOoMO7hIFnoNJEe6+uVUuwA/+iJouMXMJLoY6Da4L72h1Mp81
 o4Hr6Kxly/SMtURZ/6pCycx5ahb5TaahstYAoe7Qp1dMj5U2m6fUVfKkG7tUx1CW
 MIuvN3qJeW2qKWKmZRVM
 =zfPd
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...
2012-12-12 11:51:39 -08:00
Linus Torvalds cff2f741b8 Driver core updates for 3.8-rc1
Here's the large driver core updates for 3.8-rc1.
 
 The biggest thing here is the various __dev* marking removals.  This is
 going to be a pain for the merge with different subsystem trees, I know,
 but all of the patches included here have been ACKed by their various
 subsystem maintainers, as they wanted them to go through here.
 
 If this is too much of a pain, I can pull all of them out of this tree
 and just send you one with the other fixes/updates and then, after
 3.8-rc1 is out, do the rest of the removals to ensure we catch them all,
 it's up to you.  The merges should all be trivial, and Stephen has been
 doing them all in linux-next for a few weeks now quite easily.
 
 Other than the __dev* marking removals, there's nothing major here, some
 firmware loading updates and other minor things in the driver core.
 
 All of these have (much to Stephen's annoyance), been in linux-next for
 a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHkPkACgkQMUfUDdst+ykaWgCfW7AM30cv0nzoVO08ax6KjlG1
 KVYAn3z/KYazvp4B6LMvrW9y0G34Wmad
 =yvVr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the large driver core updates for 3.8-rc1.

  The biggest thing here is the various __dev* marking removals.  This
  is going to be a pain for the merge with different subsystem trees, I
  know, but all of the patches included here have been ACKed by their
  various subsystem maintainers, as they wanted them to go through here.

  If this is too much of a pain, I can pull all of them out of this tree
  and just send you one with the other fixes/updates and then, after
  3.8-rc1 is out, do the rest of the removals to ensure we catch them
  all, it's up to you.  The merges should all be trivial, and Stephen
  has been doing them all in linux-next for a few weeks now quite
  easily.

  Other than the __dev* marking removals, there's nothing major here,
  some firmware loading updates and other minor things in the driver
  core.

  All of these have (much to Stephen's annoyance), been in linux-next
  for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.

* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
  modpost.c: Stop checking __dev* section mismatches
  init.h: Remove __dev* sections from the kernel
  acpi: remove use of __devinit
  PCI: Remove __dev* markings
  PCI: Always build setup-bus when PCI is enabled
  PCI: Move pci_uevent into pci-driver.c
  PCI: Remove CONFIG_HOTPLUG ifdefs
  unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
  sh/PCI: Remove CONFIG_HOTPLUG ifdefs
  powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
  mips/PCI: Remove CONFIG_HOTPLUG ifdefs
  microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
  dma: remove use of __devinit
  dma: remove use of __devexit_p
  firewire: remove use of __devinitdata
  firewire: remove use of __devinit
  leds: remove use of __devexit
  leds: remove use of __devinit
  leds: remove use of __devexit_p
  mmc: remove use of __devexit
  ...
2012-12-11 13:13:55 -08:00
Linus Torvalds b0885d01f9 GPIO follow up patch and type change for v3.5 merge window
Primarily device driver additions, features and bug fixes. Not much
 touching gpio common subsystem support. Should not be scary.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2nHAAoJEEFnBt12D9kBKnIP/0y/0LMUUMVp1LN/UeCyPdq+
 rqWdI57a+ToAiGcdSG2INR5fjC8duPP1UOSgQXQFsAdF1qy7vN7ejPqmoAGcVoRW
 P9O64s8eYQprabx3fSiqAOhav6ZUpxyfri9z/sz8JaTlpJrbiqf1MrxFQ/0oXZa9
 KqOFAJvKn+iqWjcpFkmeIvNsFT2lTeURyXhvYWUFig/VVuS335+FZYX0Ic1C69YM
 tf0Z+a6XO8JnAKgC13GsyJ6ctXA1kg1oKLnLHEekr3Qhkic3MTFKS2dPExzGjnbi
 NY4ev2SxAq74CFwSJDuhPiPk20FpveHKHLsptFdNpCR9lMG038oRnqAnYyw3gV/w
 z4GufpIZGK/xemIgHqNHejxS+tcH4Ax1wU++TkmIvsPJDq7uZPX/Gu9/+BMpeKxJ
 oJJV+mRCKDcjxXcxtrybF9+t8WdVZfW2qSt1K7LRO3eRV2n9Y+20R6iGKXhYxHaj
 TaQTtXIbc4q5ANg72O+c8htBhy0a2H1O5CtrXwwxBBHHsRachyHT6V9AD+7AKZ6e
 YElRV+v8dOviuUcj+nbf2riA7KnwtBLYfwdVQzTfbD1Fq8RUvMEjq2XQXYKhrMSw
 r8gp1sUnFmAVOikJFqVgYN8NyToVEyw1i2LH8skzCUnE0PPi+kT8CtaY+tTMuF3v
 mBixcMEKKhzsFtYmAqU+
 =2XeO
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull GPIO updates from Grant Likely:
 "GPIO follow up patch and type change for v3.5 merge window

  Primarily device driver additions, features and bug fixes.  Not much
  touching gpio common subsystem support.  Should not be scary."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  gpio: Provide the STMPE GPIO driver with its own IRQ Domain
  gpio: add TS-5500 DIO blocks support
  gpio: pcf857x: use client->irq for gpio_to_irq()
  gpio: stmpe: Add DT support for stmpe gpio
  gpio: pl061 depends on ARM
  gpio/pl061: remove old comment
  gpio: SPEAr: add spi chipselect control driver
  gpio: gpio-max710x: Support device tree probing
  gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration
  gpio: tegra: read output value when gpio is set in direction_out
  gpio: pca953x: Add compatible strings to gpio-pca953x driver
  gpio: pca953x: Register an IRQ domain
  gpio: mvebu: Set free callback for gpio_chip
  gpio: tegra: Drop exporting static functions
  gpio: tegra: Staticize non-exported symbols
  gpio: tegra: fix suspend/resume apis
  gpio-pch: Set parent dev for gpio chip
  gpio: em: Fix build errors
  GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init()
  gpio/tc3589x: convert to use the simple irqdomain
  ...
2012-12-11 13:00:56 -08:00
Linus Torvalds bad73c5aa0 ACPI and power management updates for 3.8-rc1
* Introduction of device PM QoS flags.
 
 * ACPI device power management update allowing subsystems other than
   PCI to use it more easily.
 
 * ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.
 
 * ACPICA update to version 20121018 from Bob Moore and Lv Zheng.
 
 * ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.
 
 * Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU
   hot-remove support from Toshi Kani.
 
 * ACPI EC updates from Feng Tang.
 
 * cpufreq updates from Viresh Kumar, Fabio Baltieri and others.
 
 * cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.
 
 * Support for using multiple cpuidle drivers at the same time and cpuidle
   cleanups from Daniel Lezcano.
 
 * devfreq updates from Nishanth Menon and others.
 
 * cpupower update from Thomas Renninger.
 
 * Fixes and small cleanups all over the place.
 
 --
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxxevAAoJEKhOf7ml8uNsHacQAK2xoQozDddPBAaTCf1OWW/G
 J4E2qMn+gy4AtFmQ0/xeZVvvylOCn9eu/kv3QJ/bFlVoUsqTgfPwQBjT6HjF1Acn
 7yVFdr9H/tn2wi9nW2Gv6Tl2Hr/kFLpo0f5Kd40Z+P8SV5sKX5ktJcVpJ/I/P4Vh
 Qw2nWtj7hQktZDERzgG4ZpMbQToNhbLhbKWB9ad3/XQSSA9JkfgvBFgrTEGHcZD5
 bwsggjNdOAWNGeDdzRsQSDn0Alld5ILVdSJ5xKimO1O70WvKc7fqA1IdYRIeKL90
 yz4bcoYKzl9iktlw8+x5o1U9mrc8TFV5p4+zV+t5Z6pzS/J3kWvnsW4zu9sCrxFv
 Wic3SKyiem7s2dxrYyj4ZXAci3GK4ouRTrCLqk7/00tEGdwAQD1ZNfsUJp6jKayz
 FvtZUgItcOyrlQ6B4nh951OY6dI3AUYJ2NuWWNr5NZkgVAvQGV8zTGOImbeVeL2+
 pMiw14zScO3ylYilVcjTKDDMj2sDZ68mw5PIcbmksvWsCLo26jDBVDtLVmtYWyd4
 ek3WnOrQZr0R3agvOLLssMKXompvpP+N4Klf4rV+GtqGsWtHryYKys2Laju9FwFj
 yYLchxYlxhGTzqq8LjF90HDL0TWpPe6cPi+B5ow9g/SXLexbMKNQGhv3Jovm2yR3
 j54tKBWy7e9AAYEDPirX
 =6OEP
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Introduction of device PM QoS flags.

 - ACPI device power management update allowing subsystems other than
   PCI to use it more easily.

 - ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.

 - ACPICA update to version 20121018 from Bob Moore and Lv Zheng.

 - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.

 - Introduction of acpi_handle_<level>() messaging macros and ACPI-based
   CPU hot-remove support from Toshi Kani.

 - ACPI EC updates from Feng Tang.

 - cpufreq updates from Viresh Kumar, Fabio Baltieri and others.

 - cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.

 - Support for using multiple cpuidle drivers at the same time and
   cpuidle cleanups from Daniel Lezcano.

 - devfreq updates from Nishanth Menon and others.

 - cpupower update from Thomas Renninger.

 - Fixes and small cleanups all over the place.

* tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits)
  mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  ACPI: add Haswell LPSS devices to acpi_platform_device_ids list
  ACPI: add documentation about ACPI 5 enumeration
  pnpacpi: fix incorrect TEST_ALPHA() test
  ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h
  ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
  ACPI : do not use Lid and Sleep button for S5 wakeup
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
  spi / ACPI: add ACPI enumeration support
  gpio / ACPI: add ACPI support
  PM / devfreq: remove compiler error with module governors (2)
  cpupower: IvyBridge (0x3a and 0x3e models) support
  cpupower: Provide -c param for cpupower monitor to schedule process on all cores
  cpupower tools: Fix warning and a bug with the cpu package count
  cpupower tools: Fix malloc of cpu_info structure
  cpupower tools: Fix issues with sysfs_topology_read_file
  cpupower tools: Fix minor warnings
  cpupower tools: Update .gitignore for files created in the debug directories
  ...
2012-12-11 12:45:35 -08:00
Linus Torvalds 505cbedab9 This is the pinctrl big pull request for v3.8.
As can be seen from the diffstat the major changes
 are:
 
 - A big conversion of the AT91 pinctrl driver and
   the associated ACKed platform changes under
   arch/arm/max-at91 and its device trees. This
   has been coordinated with the AT91 maintainers
   to go in through the pinctrl tree.
 
 - A larger chunk of changes to the SPEAr drivers
   and the addition of the "plgpio" driver for the
   SPEAr as well.
 
 - The removal of the remnants of the Nomadik driver
   from the arch/arm tree and fusion of that into
   the Nomadik driver and platform data header files.
 
 - Some local movement in the Marvell MVEBU drivers,
   these now have their own subdirectory.
 
 - The addition of a chunk of code to gpiolib under
   drivers/gpio to register gpio-to-pin range mappings
   from the GPIO side of things. This has been
   requested by Grant Likely and is now implemented,
   it is particularly useful for device tree work.
 
 Then we have incremental updates all over the place,
 many of these are cleanups and fixes from Axel Lin
 who has done a great job of removing minor mistakes
 and compilation annoyances.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQupLkAAoJEEEQszewGV1z8ykP/3yLi5hb3QstajrL3jvrHcqN
 7sc4uW1/9pCa6802nBw7qOfIGxgTAriGtAIePdtGhIkij6TLyyWfvlmUz3iJkeZ5
 4nYy69yOdNMeBGvhXBkBD4K4lL3NGZ9eR+S1rgWY0J3Y+a5upibJeaXxmYBayjBH
 bN/OiK77zaKv91zKSZ4YW9WCzrjn2E0w1mDRcWdffcyrNplY8qm/G2iXBT+UoCLa
 UoR1zxG9nqF+nQ8mL+dVtVjlHsUcj0NEp34HQrUQ8ACOaEIiSI/zDe7afOC38Iy7
 EUTV4IwKeKJyTnAN/QSzbTXF41CR/Qbihubo6sUrbAmyJXLnybVotd4Inh4ca7II
 c2TPV89tSnJWwDSizHwbY3sXIVw8ojmjYMr1ib0Z9GBGyoij1va5WqCJ4iIzTzuc
 imvDSz8ctuuxo6iOQs3smUaHXGz1V+3zvQ5v+Ioc1h9mN2LVKNa6NjmFNZmeFHLa
 44zIes51DUXizaRobOffjoTIlUkAdwYQUpRtq0hvQtgYTyUIeXzfzCNzDoT6bhK3
 VhLn4c4apETER6KtYCPu8PtxM/yyopwUj95WvnPK2fu/m+1B26jUVawomWfRtCQF
 kuovLCTTemn04jWWl3r0JovE/tVcgBrpxTYi6Z4RPY7PuD4sQ477DeM2x3DWZPQQ
 MHveLGA87735XKZkqQRR
 =rUOP
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the first and major pinctrl changes for the v3.8 merge
  cycle.  Some of this is used as merge base for other trees so I better
  be early on the trigger.

  As can be seen from the diffstat the major changes are:

  - A big conversion of the AT91 pinctrl driver and the associated ACKed
    platform changes under arch/arm/max-at91 and its device trees.  This
    has been coordinated with the AT91 maintainers to go in through the
    pinctrl tree.

  - A larger chunk of changes to the SPEAr drivers and the addition of
    the "plgpio" driver for the SPEAr as well.

  - The removal of the remnants of the Nomadik driver from the arch/arm
    tree and fusion of that into the Nomadik driver and platform data
    header files.

  - Some local movement in the Marvell MVEBU drivers, these now have
    their own subdirectory.

  - The addition of a chunk of code to gpiolib under drivers/gpio to
    register gpio-to-pin range mappings from the GPIO side of things.
    This has been requested by Grant Likely and is now implemented, it
    is particularly useful for device tree work.

  Then we have incremental updates all over the place, many of these are
  cleanups and fixes from Axel Lin who has done a great job of removing
  minor mistakes and compilation annoyances."

* tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits)
  ARM: mmp: select PINCTRL for ARCH_MMP
  pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910
  pinctrl: pinctrl-single: Fix error check condition
  pinctrl: SPEAr: Update error check for unsigned variables
  gpiolib: Fix use after free in gpiochip_add_pin_range
  gpiolib: rename pin range arguments
  pinctrl: single: support gpio request and free
  pinctrl: generic: add input schmitt disable parameter
  pinctrl/u300/coh901: stop spawning pinctrl from GPIO
  pinctrl/u300/coh901: let the gpio_chip register the range
  pinctrl: add function to retrieve range from pin
  gpiolib: return any error code from range creation
  pinctrl: make range registration defer properly
  gpiolib: rename find_pinctrl_*
  gpiolib: let gpiochip_add_pin_range() specify offset
  ARM: at91: pm9g45: add mmc support
  ARM: at91: Animeo IP: add mmc support
  ARM: at91: dt: add mmc pinctrl for Atmel reference boards
  ARM: at91: dt: at91sam9: add mmc pinctrl support
  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards
  ...
2012-12-11 11:21:33 -08:00
Lee Jones fc13d5a5b1 gpio: Provide the STMPE GPIO driver with its own IRQ Domain
The STMPE GPIO driver can be used as an IRQ controller by some
related devices. Here we provide it with its very own IRQ Domain
so that IRQs can be issued dynamically. This will stand the
driver in good stead when it is enabled for Device Tree, as this
it a prerequisite.

Cc: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-10 11:23:30 +01:00
Vivien Didelot 759f5f3752 gpio: add TS-5500 DIO blocks support
Technologic Systems TS-5500 provides digital I/O lines exposed through
pin blocks. On this platform, there are three of them, named DIO1, DIO2
and LCD port, that may be used as a DIO block.

The TS-5500 pin blocks are described in the product's wiki:
http://wiki.embeddedarm.com/wiki/TS-5500#Digital_I.2FO

This driver is not limited to the TS-5500 blocks. It can be extended to
support similar boards pin blocks, such as on the TS-5600.

This patch is the V2 of the previous https://lkml.org/lkml/2012/9/25/671
with corrections suggested by Linus Walleij.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-10 11:23:25 +01:00
Kuninori Morimoto 805f864ebe gpio: pcf857x: use client->irq for gpio_to_irq()
6e20a0a429
(gpio: pcf857x: enable gpio_to_irq() support)
added gpio_to_irq() support on pcf857x driver,
but it used pdata->irq.
This patch modifies driver to use client->irq instead of it.
It modifies kzm9g board platform settings,
and device probe information too.
This patch is tested on kzm9g board

Reported-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-07 09:16:12 +01:00
Masanari Iida e41e85cc17 treewide: Fix typos in various Kconfig
Correct spelling typo within various Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-03 11:03:56 +01:00
Vipul Kumar Samar 86605cfe8c gpio: stmpe: Add DT support for stmpe gpio
This patch allows the STMPE GPIO driver to be successfully probed and
initialised when Device Tree support is enabled. Bindings are mentioned in
Documentation too.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-01 17:45:16 +01:00
Alessandro Rubini 8618b3b47c gpio: pl061 depends on ARM
Commit dece904d (gpio: pl061: use chained_irq_* functions in irq
handler) introduced chained_irq_enter/exit, which is only
available for arch/arm and the driver won't compile elsewhere.

The dependency is thus made explicit, because AMBA is used in the x86
world by a PCI-to-AMBA bridge, to be submitted.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-01 16:10:28 +01:00
Rafael J. Wysocki d9ba1025a4 Merge branch 'acpi-enumeration'
* acpi-enumeration:
  spi / ACPI: add ACPI enumeration support
  gpio / ACPI: add ACPI support
2012-11-30 12:38:51 +01:00
Mathias Nyman e29482e848 gpio / ACPI: add ACPI support
Add support for translating ACPI GPIO pin numbers to Linux GPIO API pins.
Needs a gpio controller driver with the acpi handler hook set.

Drivers can use acpi_get_gpio() to translate ACPI5 GpioIO and GpioInt
resources to Linux GPIO's.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30 12:37:36 +01:00
Baruch Siach 835c192f36 gpio/pl061: remove old comment
Since 3ab524754 (gpio: pl061: convert to use generic irq chip) we only have one
spinlock in struct pl061_gpio.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-30 11:12:07 +00:00
Bill Pemberton 206210ce68 gpio: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:59 -08:00
Bill Pemberton b5ba78de76 gpio: remove use of __devinitconst
CONFIG_HOTPLUG is going away as an option so __devinitconst is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:59 -08:00
Bill Pemberton aeca8ad1f0 gpio: remove use of __devinitdata
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:59 -08:00
Bill Pemberton 3836309d93 gpio: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:33 -08:00
Bill Pemberton 8283c4ff57 gpio: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:36:36 -08:00
Olof Johansson 0dfeada909 orion dt for v3.8
- ehci-orion dt binding
  - gpio-poweroff
  - use dt regulators
  - move mpp to DT/pinctrl
 
 Depends on:
 
  - orion/boards
 
     - merge conflicts
        - keep all 'select's in Kconfig
        - remove all #includes in board-*.c
 
  - pinctrl/devel up to:
 
     - 06763c7 pinctrl: mvebu: move to its own directory
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJQsEfdAAoJEAi3KVZQDZAeBd8IAIAkBGIJyUJSmQJEWkZ/9ezq
 UOLec1t/TnLhAQ1Sk8g4C41wmHKYNqmZSVaAXC+QP6Yw+Gdhlw+V6YBjOYDzA7Y4
 k8ljw3SFbvS+AIx0qK26j6Tf6En2H5lMXsdlKoarCV+G+MxAHsQO7jL6y7BFwTlX
 QnwJFz+NRzMFxaPiCS+43oZuxIIzkHe8wKMb0y7nSiNQYUUv8TdKvyK+ekFuszOp
 v6uo/MI1p1/xdUxDbEKxOwmUjAy7x+t0LUFi1dsWuiDHdrG+BVT4NkJuFaD8Ui13
 VoUD1ogyWHQZV2hq0dfj+9Hed5NEgl6toAzGN9LPLmsuVUXCnB2CdBprhuDv5F8=
 =yaX1
 -----END PGP SIGNATURE-----

Merge tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/dt

From Jason Cooper:
orion dt for v3.8

 - ehci-orion dt binding
 - gpio-poweroff
 - use dt regulators
 - move mpp to DT/pinctrl

Depends on:

 - orion/boards

    - merge conflicts
       - keep all 'select's in Kconfig
       - remove all #includes in board-*.c

 - pinctrl/devel up to:

    - 06763c7 pinctrl: mvebu: move to its own directory

* tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux: (211 commits)
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ARM: Kirkwood: Convert dnskw to pinctrl
  ARM: Kirkwood: Convert iConnect to pinctrl.
  ARM: Kirkwood: Convert TS219 to pinctrl.
  ARM: Kirkwood: Add DTSI files for pinctrl
  ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-26 01:09:53 -08:00
Olof Johansson 0f9cb211ba Linux 3.7-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQss0FAAoJEHm+PkMAQRiG6cEH/An3PYsWBBy27tzoLyVfJKF1
 3m3vR8HS2tnHg6erxms+738jos59vrWXV0Ygnvw0DHbGR0HNb4rkwce/KXu/jgOD
 MRYNYhlhMFJTEUFrSrcwKITrAV3kVPWXxPXgAR6Gzpr6NPKKM9TBzEv0ze56TFYz
 asOxqeBcPSS7aFZlkoNsy1wG4l0Quo5ke8VZIxo9Me5qlqubAoZ6pING4wAGXqeE
 tf81CevSdpe0nqr8/dlYyCvLjrurgpJQczxRCBI3mP6kLWGfUCVzZmcu86PfT9b+
 35zNJwDneIoN+D9bVDHy6mrq9uQdmhWnQuhv1joTPn6RDn1nyBRBd+A5qLxSov4=
 =CPoy
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc7' into next/cleanup

Merging in mainline back to next/cleanup since it has collected a few
conflicts between fixes going upstream and some of the cleanup patches.
Git doesn't auto-resolve some of them, and they're mostly noise so let's
take care of it locally.

Conflicts are in:
	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
	arch/arm/plat-omap/i2c.c
	drivers/video/omap2/dss/dss.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-25 21:34:34 -08:00
Andrew Lunn 49e928d6cf GPIO: mvebu: Allow all plat-orion platforms.
Kirkwood & Dove can also use this driver, so expand the scope to
include all platform orion devices.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24 02:57:31 +00:00
Olof Johansson 24025f6f58 Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:

Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12
SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA
PHY.

As I commented on [4/7], this branch merged pinctrl/samsung to support
pinctrl for exynos4x12 without useless merge conflicts.

* 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
  ARM: EXYNOS: DT Support for SATA and SATA PHY
  ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
  ARM: dts: Add node for touchscreen for exynos4210-trats
  ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
  ARM: dts: Add node for i2c3 bus for exynos4210-trats
  ARM: dts: Add nodes for GPIO keys available on Trats
  ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
  ARM: dts: Add nodes for pin controllers for exynos4x12
  pinctrl: samsung: Add support for EXYNOS4X12
  gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12
  ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12
  ARM: dts: add board dts file for EXYNOS4412 based SMDK board
  ARM: dts: Add support for EXYNOS4X12 SoCs
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos5
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos4
  ARM: EXYNOS: Add MFC device tree support
  ARM: dts: Enable serial controllers on Origen and SMDKV310
  Documentation: Update samsung-pinctrl device tree bindings documentation
  pinctrl: samsung: Add GPIO to IRQ translation
  pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT
  ...

Add/add conflicts in:
	arch/arm/boot/dts/exynos5250-smdk5250.dts
	arch/arm/boot/dts/exynos5250.dtsi
	arch/arm/mach-exynos/mach-exynos5-dt.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 11:30:32 -08:00
Olof Johansson 4aa7cf79b1 Merge branch 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim:
This is for Samsung gpio stuff and got the ack from Linus Walleij.

* 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  gpio: samsung: use pr_* instead of printk
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
2012-11-21 10:13:53 -08:00
Peter Ujfalusi 14591d888e mfd/rtc/gpio: twl: No need to allocate bigger buffer for write
Since the twl-core has been converted to use regmap it is no longer needed
to allocate bigger buffer for data when writing to twl.

CC: Grant Likely <grant.likely@secretlab.ca>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21 16:08:00 +01:00
Axel Lin b4d4b1f087 gpiolib: Fix use after free in gpiochip_add_pin_range
This is introduced by commit 9ab6e988
"gpiolib: return any error code from range creation".

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 10:08:05 +01:00
Linus Walleij 316511c013 gpiolib: rename pin range arguments
To be crystal clear on what the arguments mean in this
funtion dealing with both GPIO and PIN ranges with confusing
naming, we now have gpio_offset and pin_offset and we are
on the clear that these are offsets into the specific GPIO
and pin controller respectively. The GPIO chip itself will
of course keep track of the base offset into the global
GPIO number space.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 10:07:48 +01:00
Linus Walleij 8f23ca1a73 gpiolib: return any error code from range creation
If we try to create a range for a certain GPIO chip and the
target pin controller is not yet available it may return
a probe deferral error code, so handle this all the way
our by checking the error code.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 08:55:11 +01:00
Linus Walleij 192c369c61 gpiolib: rename find_pinctrl_*
Rename the function find_pinctrl_and_add_gpio_range()
to pinctrl_find_and_add_gpio_range() so as to be consistent
with the rest of the functions.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 08:55:10 +01:00
Linus Walleij 3f0f867060 gpiolib: let gpiochip_add_pin_range() specify offset
Like with commit 3c739ad0df
it is not always enough to specify all the pins of a gpio_chip
from offset zero to be added to a pin map range, since the
mapping from GPIO to pin controller may not be linear at all,
but need to be broken into a few consecutive sub-ranges or
1-pin entries for complicated cases. The ranges may also be
sparse.

This alters the signature of the function to accept offsets
into both the GPIO-chip local pinspace and the pin controller
local pinspace.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 08:55:03 +01:00
Lars Poeschel 9d5b72de0d gpio: Add viperboard gpio driver
This adds the mfd cell to use the gpio a and gpio b part
of the Nano River Technologies viperboard.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20 12:21:12 +01:00
Fabio Estevam d511b9c362 gpio: gpio-da9052: Convert to the new da9052 interrupt functions
Convert to the new da9052 interrupt functions, so that we can get rid of
irq_base references.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20 12:21:11 +01:00
Shiraz Hashim b53bc2819a gpio: SPEAr: add spi chipselect control driver
SPEAr platform provides a provision to control chipselects of ARM PL022
Prime Cell spi controller through its system registers, which otherwise
remains under PL022 control which some protocols do not want.

This commit intends to provide the spi chipselect control in software over
gpiolib interface. spi chip drivers can use the exported gpiolib interface to
define their chipselect through DT or platform data.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-18 00:01:27 +01:00
Daniel M. Weeks cbf24fad8e gpio-mcp23s08: Build I2C support even when CONFIG_I2C=m
The driver has both SPI and I2C pieces. The appropriate pieces are built based
on whether SPI and/or I2C is/are enabled. However, it was only checking if I2C
was built-in, never if it was built as a module. This patch checks for either
since building both this driver and I2C as modules is possible.

Signed-off-by: Daniel M. Weeks <dan@danweeks.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 22:22:24 +01:00
Thierry Reding cb144fe8e0 gpio: adnp: Depend on OF_GPIO instead of OF
The driver accesses the of_node field of struct gpio_chip, which is only
available if OF_GPIO is selected. This solves a build issue on SPARC
which conflicts with OF_GPIO and therefore does not provide this field.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 22:22:23 +01:00
Jamie Lentin e91337609a mvebu-gpio: Disable blinking when enabling a GPIO for output
The plat-orion GPIO driver would disable any pin blinking whenever
using a pin for output. Do the same here, as a blinking LED will
continue to blink regardless of what the GPIO pin level is.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 22:22:23 +01:00
Roland Stigge 8754fccbae gpio: gpio-max710x: Support device tree probing
For probing via device tree, we need to support the case without platform_data.
In this case, chip.base is set to -1 for automatic numbering.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:21:08 +01:00
Peter Ujfalusi 9859eb99e9 gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration
Avoid using the TWL4030_MODULE_PWMA/B as module ID. The LEDEN, PWMA ON/OFF
and PWMB ON/OFF registers are in a continuous range starting from LED base.
This is going to be helpful for further cleanup in the twl stack.

No functional changes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:15:33 +01:00
Laxman Dewangan 195812e4b6 gpio: tegra: read output value when gpio is set in direction_out
Read the output value when gpio is set for the output mode for
gpio_get_value(). Reading input value in direction out does not
give correct value.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:14:04 +01:00
Maxime Ripard ed32620ea7 gpio: pca953x: Add compatible strings to gpio-pca953x driver
Even though the device tree binding code was already written, the
compatible strings were not yet in the driver.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:09:54 +01:00
Maxime Ripard 55ecd26373 gpio: pca953x: Register an IRQ domain
The PCA953x used to register no IRQ domain, which made it impossible to
use it as an interrupt-parent from the device tree.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:08:32 +01:00
Haojian Zhuang 49ea7fc094 ARM: pxa: remove pxa95x support
PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

The assumption is that nobody will miss this support. If you are
reading this text because you actually require pxa95x support on
a new kernel, we can work out a way to revert this patch or add
support to the mmp platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 13:50:13 +01:00
Laxman Dewangan fe39f2f4dc mfd: Implement tps6586x gpio_to_irq
The TPS6586x adds the interrupt of this device using
linear mapping on irq domain.
Hence, implement gpio_to_irq to get the irq number
corresponding to TPS6586x GPIOs which is created
dynamically.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13 20:02:15 +01:00
Linus Walleij 1e63d7b936 gpiolib: separation of pin concerns
The fact that of_gpiochip_add_pin_range() and
gpiochip_add_pin_range() share too much code is fragile and
will invariably mean that bugs need to be fixed in two places
instead of one.

So separate the concerns of gpiolib.c and gpiolib-of.c and
have the latter call the former as back-end. This is necessary
also when going forward with other device descriptions such
as ACPI.

This is done by:

- Adding a return code to gpiochip_add_pin_range() so we can
  reliably check whether this succeeds.

- Get rid of the custom of_pinctrl_add_gpio_range() from
  pinctrl. Instead create of_pinctrl_get() to just retrive the
  pin controller per se from an OF node. This composite
  function was just begging to be deleted, it was way to
  purpose-specific.

- Use pinctrl_dev_get_name() to get the name of the retrieved
  pin controller and use that to call back into the generic
  gpiochip_add_pin_range().

Now the pin range is only allocated and tied to a pin
controller from the core implementation in gpiolib.c.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:07 +01:00
Linus Walleij 9ef0d6f762 gpiolib: call pin removal in chip removal function
This makes us call gpiochio_remove_pin_ranges() in the
gpiochip_remove() function, so we get rid of ranges when
freeing the chip.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:06 +01:00
Linus Walleij e93fa3f243 gpiolib: remove duplicate pin range code
Commit 69e1601bca88809dc118abd1becb02c15a02ec71
"gpiolib: provide provision to register pin ranges"

Introduced both of_gpiochip_remove_pin_range() and
gpiochip_remove_pin_ranges(). But the contents are exactly
the same so remove the OF one and rely on the range deletion
in the core.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:06 +01:00
Linus Walleij 167c1af944 gpiolib-of: staticize the pin range calls
Commit 69e1601bca88809dc118abd1becb02c15a02ec71
"gpiolib: provide provision to register pin ranges"

Declared the of_gpiochip_[add|remove]_pin_range() global
while they should be static as they are only ever used in
this file. Let's convert them to static.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:05 +01:00
Linus Walleij 165adc9c17 gpiolib: fix up function prototypes etc
Commit 69e1601bca88809dc118abd1becb02c15a02ec71
"gpiolib: provide provision to register pin ranges"

Got most of it's function prototypes wrong, so fix this up by:

- Moving the void declarations into static inlines in
  <linux/gpio.h> (previously the actual prototypes were declared
  here...)

- Declare the gpiochip_add_pin_range() and
  gpiochip_remove_pin_ranges() functions in <asm-generic/gpio.h>
  together with the pin range struct declaration itself.

- Actually only implement these very functions in gpiolib.c
  if CONFIG_PINCTRL is set.

- Additionally export the symbols since modules will need to
  be able to do this.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:04 +01:00
Shiraz Hashim f23f1516b6 gpiolib: provide provision to register pin ranges
pinctrl subsystem needs gpio chip base to prepare set of gpio
pin ranges, which a given pinctrl driver can handle. This is
important to handle pinctrl gpio request calls in order to
program a given pin properly for gpio operation.

As gpio base is allocated dynamically during gpiochip
registration, presently there exists no clean way to pass this
information to the pinctrl subsystem.

After few discussions from [1], it was concluded that may be
gpio controller reporting the pin range it supports, is a
better way than pinctrl subsystem directly registering it.

[1] http://comments.gmane.org/gmane.linux.ports.arm.kernel/184816

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
[Edited documentation a bit]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11 19:06:00 +01:00
Linus Torvalds 2b1768f39a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Several build/bug fixes for sparc, including:

  1) Configuring a mix of static vs.  modular sparc64 crypto modules
     didn't work, remove an ill-conceived attempt to only have to build
     the device match table for these drivers once to fix the problem.

     Reported by Meelis Roos.

  2) Make the montgomery multiple/square and mpmul instructions actually
     usable in 32-bit tasks.  Essentially this involves providing 32-bit
     userspace with a way to use a 64-bit stack when it needs to.

  3) Our sparc64 atomic backoffs don't yield cpu strands properly on
     Niagara chips.  Use pause instruction when available to achieve
     this, otherwise use a benign instruction we know blocks the strand
     for some time.

  4) Wire up kcmp

  5) Fix the build of various drivers by removing the unnecessary
     blocking of OF_GPIO when SPARC.

  6) Fix unintended regression wherein of_address_to_resource stopped
     being provided.  Fix from Andreas Larsson.

  7) Fix NULL dereference in leon_handle_ext_irq(), also from Andreas
     Larsson."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix build with mix of modular vs. non-modular crypto drivers.
  sparc: Support atomic64_dec_if_positive properly.
  of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again
  sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq
  sparc: Add sparc support for platform_get_irq()
  sparc: Allow OF_GPIO on sparc.
  qlogicpti: Fix build warning.
  sparc: Wire up sys_kcmp.
  sparc64: Improvde documentation and readability of atomic backoff code.
  sparc64: Use pause instruction when available.
  sparc64: Fix cpu strand yielding.
  sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.
2012-11-10 21:58:34 +01:00
Axel Lin 3764bdde1d gpio: mvebu: Set free callback for gpio_chip
We call pinctrl_request_gpio() in request callback, thus we need to call
pinctrl_free_gpio() in free callback.

Both mvebu_gpio_request() and mvebu_gpio_free() are not referenced outside of
this file, make them static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08 22:37:54 +01:00
Axel Lin 65b6ca4667 gpio: tegra: Drop exporting static functions
Both tegra_gpio_enable() and tegra_gpio_disable() are static functions, it does
not make sense to export them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08 22:35:31 +01:00
Axel Lin 924a09873c gpio: tegra: Staticize non-exported symbols
Both tegra_gpio_request() and tegra_gpio_free() are not referenced outside of
this file, make them static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08 22:33:58 +01:00
Laxman Dewangan 8939ddc76a gpio: tegra: fix suspend/resume apis
Following are changes done to fix the suspend/resume
functionality of tegra gpio driver:
- Protect suspend/resume callbacks with CONFIG_PM_SLEEP
  because CONFIG_PM doesn't actually enable any of the PM callbacks, it
  only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME.
  This means if CONFIG_PM is used to protect system sleep callbacks
  then it may end up unreferenced if only runtime PM is enabled.

- Fix the suspend/resume APIs declaration as per callback prototype.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08 22:23:18 +01:00
Jingoo Han 343db4bda6 gpio: samsung: use pr_* instead of printk
This patch uses pr_* instead of printk. Also, gpio_dbg
is replaced with pr_debug.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by/Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-07 13:10:55 +09:00
Tomasz Figa ba51bdd306 gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12
This patch modifies the Samsung GPIO driver to check for pinctrl driver
presence earlier and use generic matching instead of a single compatible
value.

This allows us to fix warning about unrecognized SoC in case of
EXYNOS4X12, which is not supported by this driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-07 09:12:11 +09:00
David S. Miller afe760e43d sparc: Allow OF_GPIO on sparc.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06 15:56:32 -08:00
Alexander Stein 5c868fc629 gpio-pch: Set parent dev for gpio chip
This will show the gpio chip as a child node
under /sys/bus/pci/devices/xxxx:xx:xx.x/

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04 19:21:29 +01:00
Axel Lin 1631081993 gpio: em: Fix build errors
Fix below build errors:

  CC [M]  drivers/gpio/gpio-em.o
drivers/gpio/gpio-em.c: In function 'em_gio_probe':
drivers/gpio/gpio-em.c:306: error: 'err' undeclared (first use in this function)
drivers/gpio/gpio-em.c:306: error: (Each undeclared identifier is reported only once
drivers/gpio/gpio-em.c:306: error: for each function it appears in.)
drivers/gpio/gpio-em.c:308: error: label 'err3' used but not defined
drivers/gpio/gpio-em.c:279: error: label 'err2' used but not defined
drivers/gpio/gpio-em.c:265: error: label 'err1' used but not defined
drivers/gpio/gpio-em.c:250: error: label 'err0' used but not defined
drivers/gpio/gpio-em.c:309: warning: no return statement in function returning non-void
drivers/gpio/gpio-em.c: At top level:
drivers/gpio/gpio-em.c:311: error: expected identifier or '(' before 'if'
drivers/gpio/gpio-em.c:317: error: expected identifier or '(' before 'if'
drivers/gpio/gpio-em.c:323: warning: data definition has no type or storage class
drivers/gpio/gpio-em.c:323: warning: type defaults to 'int' in declaration of 'ret'
drivers/gpio/gpio-em.c:323: error: 'gpio_chip' undeclared here (not in a function)
drivers/gpio/gpio-em.c:323: error: initializer element is not constant
drivers/gpio/gpio-em.c:324: error: expected identifier or '(' before 'if'
drivers/gpio/gpio-em.c:328: error: expected identifier or '(' before 'return'
drivers/gpio/gpio-em.c:330: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:332: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:334: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:336: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:338: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:340: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:342: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
drivers/gpio/gpio-em.c:344: error: expected identifier or '(' before '}' token
drivers/gpio/gpio-em.c: In function 'em_gio_remove':
drivers/gpio/gpio-em.c:361: error: implicit declaration of function 'em_gio_irq_domain_cleanup'
make[2]: *** [drivers/gpio/gpio-em.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04 18:50:15 +01:00
Linus Torvalds bc909421a9 Some GPIO fixes for the v3.7 series since -rc1:
- Fix a potential bit wrap issue in the Timberdale driver
 - Fix up the buffer allocation size in the 74x164 driver
 - Set the value in direction_output() right in the mvebu driver
 - Return proper error codes for invalid GPIOs
 - Fix an off-mode bug for the OMAP
 - Don't initialized the mask_cach on the mvebu driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQkFIMAAoJEEEQszewGV1zN4YQAKzSPyC4lsdr5sf3Ua0Xxr0l
 7Qb2tbIc9WT9E5m13h0V+sF6XVN+e3Ideg7ZFQOkuqmijA17W1Gm+hRMFYNLvhT9
 ZbVlLdzDMNrKA3VEkP4Eo4KO34awYUBkWE4UglW0PAWz1W222nn9c8HC14tasKke
 i80K55v82l8t7VhfotXhAf1DYhzxpTTzD2CBvGsgpACrNrEXMuKE68ZjeNft/HQU
 CyKmxO5bcmdkF20W2IlQtyAUJridBe5YzUdPQ0PjWi3Ejvpo13i+RHDudiDJfHpv
 5CNddMpXCC5Dl16j5EdEaKLq62mtDYlxzc65NwrRT1SYMsTyluk8faHhzqcACICS
 EoP1mbUWPOkXZxPKLudMqsT0N8ud+XSDfaFIItaP7CMEE/Omf5Ql6Rann0mWxHEP
 m8b913NAwIXtrtBn5/JAk5yqgon2Ns5+b4QxP5nc2Zzge8o9H7I1gLCsh2NFiwV4
 3aABVWUq9EFOiiCvc6K7ZaEH+5/oUrw0qnEEoEUw79Qz/XFlkVvVxcLX9ZOy6Vhd
 3RIgQPnJkNMX1Ncu+Jgd5GMJu1xMsy+urRf+VpaOReKkwiK+s6QTfeSxQBc2g+L5
 n2GR0LvnN9yDFWb9g/NUTSNJ2EjHlWtQPU7KdZRYIxey67FMRdjgA8CSnEFyiI+x
 Wq2Fx2uLE1dv/oYzFbck
 =GXA+
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 - Fix a potential bit wrap issue in the Timberdale driver
 - Fix up the buffer allocation size in the 74x164 driver
 - Set the value in direction_output() right in the mvebu driver
 - Return proper error codes for invalid GPIOs
 - Fix an off-mode bug for the OMAP
 - Don't initialize the mask_cach on the mvebu driver

* tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  GPIO: mvebu-gpio: Don't initialize the mask_cache
  gpio/omap: fix off-mode bug: clear debounce settings on free/reset
  gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios
  gpio: mvebu: correctly set the value in direction_output()
  gpio-74x164: Fix buffer allocation size
  gpio-timberdale: fix a potential wrapping issue
2012-10-30 15:56:22 -07:00
Andrew Lunn 8fcff5f137 GPIO: mvebu-gpio: Don't initialize the mask_cache
Due to the SMP nature of some of the chips, which have per CPU
registers, the driver does not use the generic irq_gc_mask_set_bit() &
irq_gc_mask_clr_bit() functions, which only support a single register.
The driver has its own implementation of these functions, which can
pick the correct register depending on the CPU being used. The
functions do however use the gc->mask_cache value.

The call to irq_setup_generic_chip() was passing
IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be
initialized to the contents of some random register. This resulted in
unexpected interrupts been delivered from random GPIO lines.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-30 22:34:20 +01:00
Jon Hunter c9c55d9211 gpio/omap: fix off-mode bug: clear debounce settings on free/reset
This change was originally titled "gpio/omap: fix off-mode bug: clear debounce
clock enable mask on free/reset". The title has been updated slightly to
reflect (what should be) the final fix.

When a GPIO is freed or shutdown, we need to ensure that any debounce settings
are cleared and if the GPIO is the only GPIO in the bank that is currently
using debounce, then disable the debounce clock as well to save power.

Currently, the debounce settings are not cleared on a GPIO free or shutdown and
so during a context restore on subsequent off-mode transition, the previous
debounce values are restored from the shadow copies (bank->context.debounce*)
leading to mismatch state between driver state and hardware state.

This was discovered when board code was doing

  gpio_request_one()
  gpio_set_debounce()
  gpio_free()

which was leaving the GPIO debounce settings in a confused state.  If that GPIO
bank is subsequently used with off-mode enabled, bogus state would be restored,
leaving GPIO debounce enabled which then prevented the CORE powerdomain from
transitioning.

To fix this, introduce a new function called _clear_gpio_debounce() to clear
any debounce settings when the GPIO is freed or shutdown. If this GPIO is the
last debounce-enabled GPIO in the bank, the debounce will also be cut.

Please note that we cannot use _gpio_dbck_disable() to disable the debounce
clock because this has been specifically created for the gpio suspend path
and is intended to shutdown the debounce clock while debounce is enabled.

Special thanks to Kevin Hilman for root causing the bug. This fix is a
collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and
Santosh Shilimkar.

Testing:
- This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio,
  enabling debounce and then freeing the gpio and checking the register
  contents, the saved register context and the debounce clock state.
- Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the
  ads7846 touchscreen in its board file using the above sequence, and so was
  failing off-mode tests in dynamic idle. Verified that off-mode tests are
  passing with this patch.

V5 changes:
- Corrected author

Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-27 18:27:11 +02:00
Wei Yongjun 2cad6a8a4c GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init()
platform_device_unregister() only calls platform_device_del() and
platform_device_put(), thus use platform_device_unregister() to
simplify the code.

Also the documents in platform.c shows that platform_device_del
and platform_device_put must _only_ be externally called in error
cases.  All other usage is a bug.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-27 18:17:30 +02:00
Linus Walleij a362605b34 gpio/tc3589x: convert to use the simple irqdomain
The special checks for whether we have a base IRQ offset or not
is surplus if we use the simple IRQ domain. The IRQ offset
zero will be interpreted as a linear domain case.

Plus this makes sure we allocate descriptors where need be, or
warn if they are preallocated with SPARSE_IRQ.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:42:22 +02:00
Linus Walleij 7385500a49 gpio/em: convert to linear IRQ domain
The code in the em driver seems to want to try to do the job of
the linear IRQ domain (allocate descriptors and grab a virtual
range). So why not just use the linear IRQ domain? The code is
now cut down so we don't need isolated functions for this.

Also note that we use irq_create_mapping() to make sure
descriptors are allocated for these IRQs.

Also fixed the FIXME to remove the domain after use.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:41:45 +02:00
Linus Walleij ce931f571b gpio/mvebu: convert to use irq_domain_add_simple()
The MVEBU driver probably just wants a few IRQs. Using the simple
domain has the upside of allocating IRQ descriptors if need be,
especially in a SPARSE_IRQ environment.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:39:46 +02:00
Linus Walleij d023567731 gpio/tegra: convert to use linear irqdomain
The Tegra driver tries to do the work of irq_domain_add_linear()
by reserving a bunch of descriptors somewhere and keeping track
of the base offset, then calling irq_domain_add_legacy(). Let's
stop doing that and simply use the linear IRQ domain.

For this to work: use irq_create_mapping() in the IRQ iterator
so that the descriptors get allocated here.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:37:22 +02:00
Dan Carpenter 529f2ad5e3 gpiolib: unlock on error in gpio_export()
We need to unlock here before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:35:17 +02:00
Mathias Nyman ad2fab36d7 gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios
gpios requested with invalid numbers, or gpios requested from userspace via sysfs
should not try to be deferred on failure.

Cc: stable@kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26 09:25:10 +02:00