This patch pulls calls to buf->ops->confirm() from all actors passed
(also indirectly) to splice_from_pipe_feed().
Is avoiding the call to buf->ops->confirm() while splice()ing to
/dev/null is an intentional optimization? No other user does that
and this will remove this special case.
Against current linux.git 6313e3c217.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.
Also, all the client-side encoder functions return 0 now, making a
return value superfluous. Take this opportunity to convert them to
return void instead.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
When I was making other changes in this area, checkscript.pl
complained about the use of leading blanks in the PROC macros in the
xdr files.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
Remove old-style NFSv4 XDR macros in favor of the style now used in
fs/nfs/nfs4xdr.c. These were forgotten during the recent nfs4xdr.c
rewrite.
Additional whitespace cleanup adds to the size of this patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
Remove old-style NFSv4 XDR macros in favor of the style now used in
fs/nfs/nfs4xdr.c. These were forgotten during the recent nfs4xdr.c
rewrite.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago. Convert all the
in-kernel users. The conversions are completely equivalent and
trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
If vfs_getattr in fill_post_wcc returns an error, we don't
set fh_post_change.
For NFSv4, this can result in set_change_info triggering a BUG_ON.
i.e. fh_post_saved being zero isn't really a bug.
So:
- instead of BUGging when fh_post_saved is zero, just clear ->atomic.
- if vfs_getattr fails in fill_post_wcc, take a copy of i_ctime anyway.
This will be used i seg_change_info, but not overly trusted.
- While we are there, remove the pointless 'if' statements in set_change_info.
There is no harm setting all the values.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
At the latest kernel(2.6.37-rc1), server just initialize the forechannel
at init_forechannel_attrs, but don't reflect it to reply.
After initialize the session success, we should copy the forechannel info
to nfsd4_create_session struct.
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When server gets drc mem fail, it should reply error to client.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC, the argument of ssv_sp_parms4 is:
struct ssv_sp_parms4 {
state_protect_ops4 ssp_ops;
sec_oid4 ssp_hash_algs<>;
sec_oid4 ssp_encr_algs<>;
uint32_t ssp_window;
uint32_t ssp_num_gss_handles;
};
If client send a exchange_id with SP4_SSV, server cann't decode
the SP4_SSV's ssp_hash_algs and ssp_encr_algs arguments correctly.
Because the kernel treat the two arguments as a signal
sec_oid4 struct, but should be a set of sec_oid4 struct.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The original code would oops if this were called from nfsd4_setattr()
because "filpp" is NULL.
(Note this case is currently impossible, as long as we only give out
read delegations.)
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Lock_kernel is gone from the code, so the comments should be updated,
too. nfsd now uses lock_flocks instead of lock_kernel to protect
against posix file locks.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a connection is closed just after a sequence or create_session
is sent over it, we could end up trying to register a callback that will
never get called since the xprt is already marked dead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The caller allocated it, the caller should free it.
The only issue so far is that we could change the flp pointer even on an
error return if the fl_change callback failed. But we can simply move
the flp assignment after the fl_change invocation, as the callers don't
care about the flp return value if the setlease call failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The NFSv4 server was initializing the dp->dl_flock pointer by the
somewhat ridiculous method of a locks_copy_lock callback.
Now that setlease uses the passed-in lock instead of doing a copy,
dl_flock no longer gets set, resulting in the lock leaking on delegation
release, and later possible hangs (among other problems).
So, initialize dl_flock and get rid of the callback.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'flock' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
locks: turn lock_flocks into a spinlock
fasync: re-organize fasync entry insertion to allow it under a spinlock
locks/nfsd: allocate file lock outside of spinlock
lockd: fix nlmsvc_notify_blocked locking
lockd: push lock_flocks down
As suggested by Christoph Hellwig, this moves allocation
of new file locks out of generic_setlease into the
callers, nfs4_open_delegation and fcntl_setlease in order
to allow GFP_KERNEL allocations when lock_flocks has
become a spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
lockd should use lock_flocks() instead of lock_kernel()
to lock against posix locks accessing the i_flock list.
This is a prerequisite to turning lock_flocks into a
spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...
Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
net/sunrpc: Use static const char arrays
nfs4: fix channel attribute sanity-checks
NFSv4.1: Use more sensible names for 'initialize_mountpoint'
NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
NFS: client needs to maintain list of inodes with active layouts
NFS: create and destroy inode's layout cache
NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
NFSv4.1: pnfs: full mount/umount infrastructure
NFS: set layout driver
NFS: ask for layouttypes during v4 fsinfo call
NFS: change stateid to be a union
NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
SUNRPC: define xdr_decode_opaque_fixed
NFSD: remove duplicate NFS4_STATEID_SIZE
Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We're doing an allocation under a spinlock, and ignoring the
possibility of allocation failure.
A better fix wouldn't require an unnecessary allocation in the common
case, but we'll leave that for later.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Already accepted by Bruce
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: introduce CONFIG_BKL.
dabusb: remove the BKL
sunrpc: remove the big kernel lock
init/main.c: remove BKL notations
blktrace: remove the big kernel lock
rtmutex-tester: make it build without BKL
dvb-core: kill the big kernel lock
dvb/bt8xx: kill the big kernel lock
tlclk: remove big kernel lock
fix rawctl compat ioctls breakage on amd64 and itanic
uml: kill big kernel lock
parisc: remove big kernel lock
cris: autoconvert trivial BKL users
alpha: kill big kernel lock
isapnp: BKL removal
s390/block: kill the big kernel lock
hpet: kill BKL, add compat_ioctl
In the sessions backchannel case, we don't need a krb5 principal name
for the client; we use the already-created forechannel credentials
instead.
Some cleanup, while we're there: make it clearer which code here is 4.0-
or sessions- specific.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The minorversion seems more a property of the client than the callback
channel.
Some time we should probably also enforce consistent minorversion usage
from the client; for now, this is just a cosmetic change.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have unhash_client_locked() remove client and associated sessions from
global hashes, but delay further dismantling till free_client().
(After unhash_client_locked(), the only remaining references outside the
destroying thread are from any connections which have xpt_user callbacks
registered.)
This will simplify locking on session destruction.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Only one of the nfsd4_callback_probe callers actually cares about
changing the callback information.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callback program is allowed to depend on the session which the
callback is going over.
No change in behavior yet, while we still only do callbacks over a
single session for the lifetime of the client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We need to keep track of which connections are available for use with
the backchannel, which for the forechannel, and which for both.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Following rfc 5661, section 18.36.4: "If the session is not successfully
created, then no changes are made to any client records on the server."
We shouldn't be confirming or incrementing the sequence id in this case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we don't deal well with a client that has multiple sessions
associated with it (even simultaneously, or serially over the lifetime
of the client).
In particular, we don't attempt to keep the backchannel running after
the original session diseappears.
We will fix that soon.
Once we do that, we need the slot sequence number to be per-session;
otherwise, for example, we cannot correctly handle a case like this:
- All session 1 connections are lost.
- The client creates session 2. We use it for the backchannel
(since it's the only working choice).
- The client gives us a new connection to use with session 1.
- The client destroys session 2.
At this point our only choice is to go back to using session 1. When we
do so we must use the sequence number that is next for session 1. We
therefore need to maintain multiple sequence number streams.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of copying the sessionid, use the new cl_cb_session pointer,
which indicates which session we're using for the backchannel.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The backchannel should be associated with a session, it isn't really
global to the client.
We do, however, want a pointer global to the client which tracks which
session we're currently using for client-based callbacks.
This is a first step in that direction; for now, just reshuffling of
code with no significant change in behavior.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:
Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.
The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
As of commit 43a9aa64a2 "NFSD:
Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call
fh_unlock on a filehandle that isn't fully initialized.
We should fix up the callers, but as a quick fix it is also sufficient
just to remove this assertion.
Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Expire clients more promptly, at the expense of possibly running the
laundromat thread more frequently.
Though it's not the default, I'd like it to be feasible to run with a
lease time of just a few seconds, at which point a minimum 10 second
wait between laundromat runs seems a little much.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This prepares the removal of the big kernel lock from the
file locking code. We still use the BKL as long as fs/lockd
uses it and ceph might sleep, but we can flip the definition
to a private spinlock as soon as that's done.
All users outside of fs/lockd get converted to use
lock_flocks() instead of lock_kernel() where appropriate.
Based on an earlier patch to use a spinlock from Matthew
Wilcox, who has attempted this a few times before, the
earliest patch from over 10 years ago turned it into
a semaphore, which ended up being slower than the BKL
and was subsequently reverted.
Someone should do some serious performance testing when
this becomes a spinlock, since this has caused problems
before. Using a spinlock should be at least as good
as the BKL in theory, but who knows...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Commit 78155ed75f "nfsd4: distinguish
expired from stale stateids" attempted to distinguish expired and stale
stateid's using time information that may not have been completely
reliable, so I reverted it.
That was throwing out the baby with the bathwater; we still do want to
return expired, but let's do that using the simpler approach of just
assuming any stateid is expired if it looks like it was given out by the
current server instance, but we can't find it any more.
This may help clients that are recovering from network partitions.
Reported-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As long as we're not implementing any session security, we should just
automatically add any new connections that come along to the list of
sessions associated with the session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The spec requires us in various places to keep track of the connections
associated with each session.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Changes:
- make sure session memory reservation is released on failure
path.
- use min_t()/min() for more compact code in several places.
- break alloc_init_session into smaller pieces.
- miscellaneous other cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of creating the new rpc client from a regular server thread,
set a flag, kick off a null call, and allow the null call to do the work
of setting up the client on the callback workqueue.
Use a spinlock to ensure the callback work gets a consistent view of the
callback parameters.
This allows, for example, changing the callback from contexts where
sleeping is not allowed. I hope it will also keep the locking simple as
we add more session and trunking features, by serializing most of the
callback-specific work.
This also closes a small race where the the new cb_ident could be used
with an old connection (or vice-versa).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This will eventually allow us, for example, to kick off null callback
from contexts where we can't sleep.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make the recall callback code more generic, so that other callbacks
will be able to use it too.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that we have both nfsd4_callback and nfsd4_cb_conn structures, I get
confused if variables of both types are always named cb....
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The existing code adjusted it based on the worst case scenario for the returned
bitmap and the best case scenario for the supported attrs attribute.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[bfields@redhat.com: removed likely/unlikely's]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are two calls that operate on ip_map_cache and are
directly called from the nfsd code. Other places will be
handled in a different way.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note with "first" always 0, and "lastflags" initially 0, we always dump
a spurious set of 0 flags at the start, among other problems.
Fix. And attempt to make the code a little more obvious.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The git://linux-nfs.org/~bfields/linux.git nfsd-next branch doesn't
compile when nfsd is a module with the following error:
ERROR: "get_task_comm" [fs/nfsd/nfsd.ko] undefined!
Replace the get_task_comm call with direct comm access, which is
safe for current.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add CONFIG_NFSD_DEPRECATED, default to y.
Only include deprecated interface if this is defined.
This allows distros to remove this interface before the official
removal, and allows developers to test without it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The syscall interface is has been replaced by a more flexible
interface since 2.6.0. It is time to work towards discarding
the old interface.
So add a entry in feature-removal-schedule.txt and print a warning
when the interface is used.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The idmap code manages request deferal by waiting for a reply from
userspace rather than putting the NFS request on a queue to be retried
from the start.
Now that the common deferal code does this there is no need for the
special code in idmap.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that a slight delay in getting a reply to an upcall doesn't
require deferring of requests, request deferral for all NFSv4
requests - the concept doesn't really fit with the v4 model.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFSv4 client's callback server calls svc_gss_principal(), which
is defined in the auth_rpcgss.ko
The NFSv4 server has the same dependency, and in addition calls
svcauth_gss_flavor(), gss_mech_get_by_pseudoflavor(),
gss_pseudoflavor_to_service() and gss_mech_put() from the same module.
The module auth_rpcgss itself has no dependencies aside from sunrpc,
so we only need to select RPCSEC_GSS.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This protects us from confusion when the wallclock time changes.
We convert to and from wallclock when setting or reading expiry
times.
Also use seconds since boot for last_clost time.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rather can duplicating this idiom twice, put it in an inline function.
This reduces the usage of 'expiry_time' out side the sunrpc/cache.c
code and thus the impact of a change that is about to be made to that
field.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
nfsd: fix NULL dereference in nfsd_statfs()
nfsd4: fix downgrade/lock logic
nfsd4: typo fix in find_any_file
nfsd4: bad BUG() in preprocess_stateid_op
The commit ebabe9a900
pass a struct path to vfs_statfs
introduced the struct path initialization, and this seems to trigger
an Oops on my machine.
fh_dentry field may be NULL and set later in fh_verify(), thus the
initialization of path must be after fh_verify().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we already had a RW open for a file, and get a readonly open, we were
piggybacking on the existing RW open. That's inconsistent with the
downgrade logic which blows away the RW open assuming you'll still have
a readonly open.
Also, make sure there is a readonly or writeonly open available for
locking, again to prevent bad behavior in downgrade cases when any RW
open may be lost.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's OK for this function to return without setting filp--we do it in
the special-stateid case.
And there's a legitimate case where we can hit this, since we do permit
reads on write-only stateid's.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix an Oops in the NFSv4 atomic open code
NFS: Fix the selection of security flavours in Kconfig
NFS: fix the return value of nfs_file_fsync()
rpcrdma: Fix SQ size calculation when memreg is FRMR
xprtrdma: Do not truncate iova_start values in frmr registrations.
nfs: Remove redundant NULL check upon kfree()
nfs: Add "lookupcache" to displayed mount options
NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)
Randy Dunlap reports:
ERROR: "svc_gss_principal" [fs/nfs/nfs.ko] undefined!
because in fs/nfs/Kconfig, NFS_V4 selects RPCSEC_GSS_KRB5
and/or in fs/nfsd/Kconfig, NFSD_V4 selects RPCSEC_GSS_KRB5.
RPCSEC_GSS_KRB5 does 5 selects, but none of these is enforced/followed
by the fs/nfs[d]/Kconfig configs:
select SUNRPC_GSS
select CRYPTO
select CRYPTO_MD5
select CRYPTO_DES
select CRYPTO_CBC
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
fanotify: use both marks when possible
fsnotify: pass both the vfsmount mark and inode mark
fsnotify: walk the inode and vfsmount lists simultaneously
fsnotify: rework ignored mark flushing
fsnotify: remove global fsnotify groups lists
fsnotify: remove group->mask
fsnotify: remove the global masks
fsnotify: cleanup should_send_event
fanotify: use the mark in handler functions
audit: use the mark in handler functions
dnotify: use the mark in handler functions
inotify: use the mark in handler functions
fsnotify: send fsnotify_mark to groups in event handling functions
fsnotify: Exchange list heads instead of moving elements
fsnotify: srcu to protect read side of inode and vfsmount locks
fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
fsnotify: use _rcu functions for mark list traversal
fsnotify: place marks on object in order of group memory address
vfs/fsnotify: fsnotify_close can delay the final work in fput
fsnotify: store struct file not struct path
...
Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:
- ecryptfs_statfs. This one doesn't actually need vfs_statfs but just
needs to do a caller to the lower filesystem statfs method.
- sys_ustat. Add a non-exported statfs_by_dentry helper for it which
doesn't won't be able to fill out the flags field later on.
In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: (34 commits)
nfsd4: fix file open accounting for RDWR opens
nfsd: don't allow setting maxblksize after svc created
nfsd: initialize nfsd versions before creating svc
net: sunrpc: removed duplicated #include
nfsd41: Fix a crash when a callback is retried
nfsd: fix startup/shutdown order bug
nfsd: minor nfsd read api cleanup
gcc-4.6: nfsd: fix initialized but not read warnings
nfsd4: share file descriptors between stateid's
nfsd4: fix openmode checking on IO using lock stateid
nfsd4: miscellaneous process_open2 cleanup
nfsd4: don't pretend to support write delegations
nfsd: bypass readahead cache when have struct file
nfsd: minor nfsd_svc() cleanup
nfsd: move more into nfsd_startup()
nfsd: just keep single lockd reference for nfsd
nfsd: clean up nfsd_create_serv error handling
nfsd: fix error handling in __write_ports_addxprt
nfsd: fix error handling when starting nfsd with rpcbind down
nfsd4: fix v4 state shutdown error paths
...
Commit f9d7562fdb "nfsd4: share file
descriptors between stateid's" didn't correctly account for O_RDWR opens.
Symptoms include leaked files, resulting in failures to unmount and/or
warnings about orphaned inodes on reboot.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's harmless to set this after the server is created, but also
ineffective, since the value is only used at the time of
svc_create_pooled(). So fail the attempt, in keeping with the pattern
set by write_versions, write_{lease,grace}time and write_recoverydir.
(This could break userspace that tried to write to nfsd/max_block_size
between setting up sockets and starting the server. However, such code
wouldn't have worked anyway, and I don't know of any examples--rpc.nfsd
in nfs-utils, probably the only user of the interface, doesn't do that.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 59db4a0c10 "nfsd: move more into
nfsd_startup()" inadvertently moved nfsd_versions after
nfsd_create_svc(). On older distributions using an rpc.nfsd that does
not explicitly set the list of nfsd versions, this results in
svc-create_pooled() being called with an empty versions array. The
resulting incomplete initialization leads to a NULL dereference in
svc_process_common() the first time a client accesses the server.
Move nfsd_reset_versions() back before the svc_create_pooled(); this
time, put it closer to the svc_create_pooled() call, to make this
mistake more difficult in the future.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a callback is retried at nfsd4_cb_recall_done() due to
some error, the returned rpc reply crashes here:
@@ -514,6 +514,7 @@ decode_cb_sequence(struct xdr_stream *xdr, struct nfsd4_cb_sequence *res,
u32 dummy;
__be32 *p;
+ BUG_ON(!res);
if (res->cbs_minorversion == 0)
return 0;
[BUG_ON added for demonstration]
This is because the nfsd4_cb_done_sequence() has NULLed out
the task->tk_msg.rpc_resp pointer.
Also eventually the rpc would use the new slot without making
sure it is free by calling nfsd41_cb_setup_sequence().
This problem was introduced by a 4.1 protocol addition patch:
[0421b5c5] nfsd41: Backchannel: Implement cb_recall over NFSv4.1
Which was overlooking the possibility of an RPC callback retries.
For not-4.1 case redoing the _prepare is harmless.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must create the server before we can call init_socks or check the
number of threads.
Symptoms were a NULL pointer dereference in nfsd_svc(). Problem
identified by Jeff Layton.
Also fix a minor cleanup-on-error case in nfsd_startup().
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Christoph points that the NFSv2/v3 callers know which case they want
here, so we may as well just call the file=NULL case directly instead of
making this conditional.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixes at least one real minor bug: the nfs4 recovery dir sysctl
would not return its status properly.
Also I finished Al's 1e41568d73 ("Take ima_path_check() in nfsd
past dentry_open() in nfsd_open()") commit, it moved the IMA
code, but left the old path initializer in there.
The rest is just dead code removed I think, although I was not
fully sure about the "is_borc" stuff. Some more review
would be still good.
Found by gcc 4.6's new warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The vfs doesn't really allow us to "upgrade" a file descriptor from
read-only to read-write, and our attempt to do so in nfs4_upgrade_open
is ugly and incomplete.
Move to a different scheme where we keep multiple opens, shared between
open stateid's, in the nfs4_file struct. Each file will be opened at
most 3 times (for read, write, and read-write), and those opens will be
shared between all clients and openers. On upgrade we will do another
open if necessary instead of attempting to upgrade an existing open.
We keep count of the number of readers and writers so we know when to
close the shared files.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It is legal to perform a write using the lock stateid that was
originally associated with a read lock, or with a file that was
originally opened for read, but has since been upgraded.
So, when checking the openmode, check the mode associated with the
open stateid from which the lock was derived.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The delegation code mostly pretends to support either read or write
delegations. However, correct support for write delegations would
require, for example, breaking of delegations (and/or implementation of
cb_getattr) on stat. Currently all that stops us from handing out
delegations is a subtle reference-counting issue.
Avoid confusion by adding an earlier check that explicitly refuses write
delegations.
For now, though, I'm not going so far as to rip out existing
half-support for write delegations, in case we get around to using that
soon.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process. Close was the only operation that already was passing
a struct file to the notification hook. This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: Eric Paris <eparis@redhat.com>
The readahead cache compensates for the fact that the NFS server
currently does an open and close on every IO operation in the NFSv2 and
NFSv3 case.
In the NFSv4 case we have long-lived struct files associated with client
opens, so there's no need for this. In fact, concurrent IO's using
trying to modify the same file->f_ra may cause problems.
So, don't bother with the readahead cache in that case.
Note eventually we'll likely do this in the v2/v3 case as well by
keeping a cache of struct files instead of struct file_ra_state's.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is just cleanup--it's harmless to call nfsd_rachache_init,
nfsd_init_socks, and nfsd_reset_versions more than once. But there's no
point to it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Right now, nfsd keeps a lockd reference for each socket that it has
open. This is unnecessary and complicates the error handling on
startup and shutdown. Change it to just do a lockd_up when starting
the first nfsd thread just do a single lockd_down when taking down the
last nfsd thread. Because of the strange way the sv_count is handled
this requires an extra flag to tell whether the nfsd_serv holds a
reference for lockd or not.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be any need to reset the nfssvc_boot time if the
nfsd startup failed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
__write_ports_addxprt calls nfsd_create_serv. That increases the
refcount of nfsd_serv (which is tracked in sv_nrthreads). The service
only decrements the thread count on error, not on success like
__write_ports_addfd does, so using this interface leaves the nfsd
thread count high.
Fix this by having this function call svc_destroy() on error to release
the reference (and possibly to tear down the service) and simply
decrement the refcount without tearing down the service on success.
This makes the sv_threads handling work basically the same in both
__write_ports_addxprt and __write_ports_addfd.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The refcounting for nfsd is a little goofy. What happens is that we
create the nfsd RPC service, attach sockets to it but don't actually
start the threads until someone writes to the "threads" procfile. To do
this, __write_ports_addfd will create the nfsd service and then will
decrement the refcount when exiting but won't actually destroy the
service.
This is fine when there aren't errors, but when there are this can
cause later attempts to start nfsd to fail. nfsd_serv will be set,
and that causes __write_versions to return EBUSY.
Fix this by calling svc_destroy on nfsd_serv when this function is
going to return error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If someone tries to shut down the laundry_wq while it isn't up it'll
cause an oops.
This can happen because write_ports can create a nfsd_svc before we
really start the nfs server, and we may fail before the server is ever
started.
Also make sure state is shutdown on error paths in nfsd_svc().
Use a common global nfsd_up flag instead of nfs4_init, and create common
helper functions for nfsd start/shutdown, as there will be other work
that we want done only when we the number of nfsd threads transitions
between zero and nonzero.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Some well-known NFSv3 clients drop their directory entry caches when
they receive replies with no WCC data. Without this data, they
employ extra READ, LOOKUP, and GETATTR requests to ensure their
directory entry caches are up to date, causing performance to suffer
needlessly.
In order to return WCC data, our server has to have both the pre-op
and the post-op attribute data on hand when a reply is XDR encoded.
The pre-op data is filled in when the incoming fh is locked, and the
post-op data is filled in when the fh is unlocked.
Unfortunately, for REMOVE, RMDIR, MKNOD, and MKDIR, the directory fh
is not unlocked until well after the reply has been XDR encoded. This
means that encode_wcc_data() does not have wcc_data for the parent
directory, so none is returned to the client after these operations
complete.
By unlocking the parent directory fh immediately after the internal
operations for each NFS procedure is complete, the post-op data is
filled in before XDR encoding starts, so it can be returned to the
client properly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When the rarely-used callback-connection-changing setclientid occurs
simultaneously with a delegation recall, we rerun the recall by
requeueing it on a workqueue. But we also need to take a reference on
the delegation in that case, since the delegation held by the rpc itself
will be released by the rpc_release callback.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used also for the pnfs cb_layoutrecall callback
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd4: fix cb_recall encoding]
"nfsd: nfs4callback encode_stateid helper function" forgot to reserve
more space after return from the new helper.
Reported-by: Michael Groshans <groshans@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If the server is out of memory is better for clients to back off and
retry than to just error out.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux:
nfsd4: shut down callback queue outside state lock
nfsd: nfsd_setattr needs to call commit_metadata
This reportedly causes a lockdep warning on nfsd shutdown. That looks
like a false positive to me, but there's no reason why this needs the
state lock anyway.
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The conversion of write_inode_now calls to commit_metadata in commit
f501912a35 missed out the call in nfsd_setattr.
But without this conversion we can't guarantee that a SETATTR request
has actually been commited to disk with XFS, which causes a regression
from 2.6.32 (only for NFSv2, but anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv4.1 adds additional flags to the share_access argument of the open
call. These flags need to be masked out in some of the existing code,
but current code does that inconsistently.
Tested-by: Michael Groshans <groshans@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If a recall fails for some unexpected reason, instead of ignoring it and
treating it like a success, it's safer to treat it as a failure,
preventing further delgation grants and returning CB_PATH_DOWN.
Also put put switches in a (two me) more logical order, with normal case
first.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since rpc_call_async() guarantees that the release method will be called
even on failure, this put is wrong.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.
- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.
The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of just looking up a path use do_filp_open to get us a file
structure for the nfs4 recovery directory. This allows us to get
rid of the last non-standard vfs_fsync caller with a NULL file
pointer.
[AV: should be using fput(), not filp_close()]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This reverts commit 78155ed75f.
We're depending here on the boot time that we use to generate the
stateid being monotonic, but get_seconds() is not necessarily.
We still depend at least on boot_time being different every time, but
that is a safer bet.
We have a few reports of errors that might be explained by this problem,
though we haven't been able to confirm any of them.
But the minor gain of distinguishing expired from stale errors seems not
worth the risk.
Conflicts:
fs/nfsd/nfs4state.c
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The alloc_init_file() first adds a file to the hash and then
initializes its fi_inode, fi_id and fi_had_conflict.
The uninitialized fi_inode could thus be erroneously checked by
the find_file(), so move the hash insertion lower.
The client_mutex should prevent this race in practice; however, we
eventually hope to make less use of the client_mutex, so the ordering
here is an accident waiting to happen.
I didn't find whether the same can be true for two other fields,
but the common sense tells me it's better to initialize an object
before putting it into a global hash table :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Note the position in the version array doesn't have to match the actual
rpc version number--to me it seems clearer to maintain the distinction.
Also document choice of rpc callback version number, as discussed in
e.g. http://www.ietf.org/mail-archive/web/nfsv4/current/msg07985.html
and followups.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The /proc/fs/nfsd/versions file calls nfsd_vers() to check whether
the particular nfsd version is present/available. The problem is
that once I turn off e.g. NFSD-V4 this call returns -1 which is
true from the callers POV which is wrong.
The proposal is to report false in that case.
The bug has existed since 6658d3a7bb "[PATCH] knfsd: remove
nfsd_versbits as intermediate storage for desired versions".
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: stable@kernel.org
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a mandatory operation. Also, here (not in open) is where we
should be committing the reboot recovery information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_set_callback_client must be called under the state lock to atomically
set or unset the callback client and shutting down the previous one.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.
Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Mark the client as expired under the client_lock so it won't be renewed
when an nfsv4.1 session is done, after it was explicitly expired
during processing of the compound.
Do not renew a client mark as expired (in particular, it is not
on the lru list anymore)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently just initialize the cl_refcount to 1
and decrement in expire_client(), conditionally freeing the
client when the refcount reaches 0.
To be used later by nfsv4.1 compounds to keep the client from
timing out while in use.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Separate out unhashing of the client and session.
To be used later by the laundromat.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used later on to hold a reference count on the client while in use by a
nfsv4.1 compound.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
and grab the client lock once for all the client's sessions.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In preparation to share the lock's scope to both client
and session hash tables.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It's legal to send a DESTROY_SESSION outside any session (as the only
operation in a compound), in which case cstate->session will be NULL;
check for that case.
While we're at it, move these checks into a separate helper function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In the replay case, the
renew_client(session->se_client);
happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.
Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Benny Halevy <bhalevy@panasas.com>
J. Bruce Fields