Commit Graph

517 Commits

Author SHA1 Message Date
Paul Mundt 7d0b0a4434 sh: Fix up ctrl_read/write stragglers in migor setup.
ctrl_read/writeX are deprecated, this converts them over to their
__raw_read/write() counterparts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02 11:52:28 +09:00
Guennadi Liakhovetski 920925f90f sh: audio support for the sh7722 Migo-R board
Configure SIU port B pins and register the WM8978 audio codec.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02 11:08:54 +09:00
Linus Torvalds 2b8c70b217 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...
2010-02-26 17:16:20 -08:00
Kuninori Morimoto 3675c750cf soc-camera: ov772x: Modify buswidth control
This patch removes "buswidth" struct member, and sets the default buswidth
to the natively supported 10 bit. You can select 8 bit buswidth by new flag.
This patch also modify ap325rxa/migor setup.c

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:00 -03:00
Magnus Damm b5f5fe80fa sh: remove dead LED code for migo-r and ms7724se
CONFIG_PM is always set on SH-Mobile these days so
get rid of the unused LED setup code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:09 +09:00
Magnus Damm 6b3b55750b sh: ecovec build fix for CONFIG_I2C=n
Allow building the ecovec board support code
even though I2C support is disabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:08 +09:00
Magnus Damm 2839bd61f6 sh: ecovec r-standby support
This patch adds board specific r-standby resume code
for ecovec.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:28 +09:00
Magnus Damm b67cf2848a sh: ms7724se r-standby support
This patch adds board specific r-standby resume code
for ms7724se.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:27 +09:00
Kuninori Morimoto 29463c28a5 sh: ms7724: modify scan_timing for KEYSC
KEYSC::SCN register of SH7724 is 3bit.
Thus, scan_timing should be 0 - 7 here.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:29 +09:00
Kuninori Morimoto bbb892aac4 sh: ms7724: Add sh_sir support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:28 +09:00
Kuninori Morimoto 2636571685 sh: mach-ecovec24: Add sh_sir support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:28 +09:00
Kuninori Morimoto 16afc9fb02 sh: sh7724: Update FSI/SPU2 clock
When FSI and Network (= NFS file system) were used at the same time,
the I/O of FSI was unstable.  This patch updates the SPU2 clock (which
is used for FSI) to solve this issue.  Special thanks to Jeremy.

Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:14:18 +09:00
Magnus Damm 6f26d19fce sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
Update the sh7724 processor code to always enable vpu_clk.

On the Ecovec board, set the vpu_clk to 166 Mhz.

The 166MHz setting results in a divide-by-6 setup for
vpu_clk and improves the VPU performance compared to the
power-on-reset/bootloader configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:11:23 +09:00
Magnus Damm 3844eadcfd sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector merge
Merge the SDHI vectors in the sh7724 INTC table
and update the SDHI platform data for Ecovec24,
KFR2R09 and MS7724SE.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09 18:24:30 +09:00
Magnus Damm e3e80046e0 sh: sh7723/AP325 SDHI vector merge
Merge the SDHI vectors in the sh7723 INTC table
and update the SDHI platform data for AP325.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09 18:24:30 +09:00
Magnus Damm 8d9adabac3 sh: sh7722/Migo-R SDHI vector merge
Merge the SDHI vectors in the sh7722 INTC table
and update the SDHI platform data for Migo-R.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09 18:24:29 +09:00
Paul Mundt deb9b22b89 sh: mach-dreamcast: Convert to sparseirq.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02 18:01:55 +09:00
Paul Mundt c7a967273a sh: mach-se: Convert SH7724 solution engine FPGA to sparseirq.
This uses the new create_irq_nr() to build up the FPGA's desired virtual
IRQ mapping and permits us to finally flip on sparseirq for this board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02 17:38:04 +09:00
Paul Mundt 9d3f1881ab Merge branch 'sh/stable-updates' 2010-02-02 11:33:45 +09:00
Paul Mundt 97b19778ee sh: mach-se: Fix up irq_desc reference.
The irq_desc needs to be accessed with irq_to_desc(), this fixes up a
build error with irq_desc being undefined.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-30 11:04:38 +09:00
Paul Mundt f655f5e956 sh: mach-titan: Kill off unused PIO port mangling.
Nothing is using this, kill it off. Fixing up access sizes can be done
with trapped I/O for anyone wanting to make use of this for devices that
need it, everything else is already pure MMIO.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-28 15:08:21 +09:00
Paul Mundt 9d56dd3b08 sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26 12:58:40 +09:00
Paul Mundt d9116d07f6 sh: mach-sdk7786: Probe system FPGA area mapping.
This implements dynamic probing for the system FPGA. The system reset
controller contains a fixed magic read word in order to identify the
FPGA. This just utilizes a simple loop that scans across all of the fixed
physical areas (area 0 through area 6) to locate the FPGA.

The FPGA also contains register information detailing the area mappings
and chip select settings for all of the other blocks, so this needs to be
done before we can set up anything else.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 18:25:19 +09:00
Paul Mundt b51989b8af sh: mach-sdk7786: reset controller reboot support.
This wires up the machine_ops reboot call to use the system reset
controller.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 16:53:11 +09:00
Paul Mundt 5f240718b4 sh: mach-sdk7786: Split out FPGA IRQ controller setup.
This moves out the FPGA IRQ controller setup code to its own file, in
preparation for switching off of IRL mode and having it provide its own
irq_chip.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 15:23:54 +09:00
Paul Mundt efd590d57a sh: mach-sdk7786: FPGA updates.
This does a bit of refactoring of the FPGA management code. The primary
FPGA initialization is moved out to its own file in preparation for
implementing some of the more complex capabilities, a complete set of
register definitions is provided, and all of the existing users in the
board code are moved over to use the new interface instead of setting up
overlapping mappings. This also corrects the FPGA size, which previously
was chomped off at the SDIF control register.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 15:08:36 +09:00
Paul Mundt 14965f16b4 sh: Fix up sdk7780 and urquell builds.
These two got broken in the heartbeat private data conversion,
fix them up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 20:10:33 +09:00
Paul Mundt dea3cf1c39 sh: urquell: Handle EXTAL configuration here, too.
urquell happens to use the same mode pins and EXTAL configuration as
SDK7786, so just copy it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 20:09:28 +09:00
Paul Mundt c809821827 sh: mach-sdk7786: Detect/configure/propagate EXTAL.
This uses the mode pins exposed through the FPGA to work out whether
we're driven from EXTAL or not and does the appropriate setup and
propagation through the clock framework.

This will also -EINVAL out for anyone adding in their own oscillators,
forcing proper configuration with the clock framework instead of
proceeding on with bogus clock values.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 19:38:36 +09:00
Paul Mundt f33609344a sh: Convert p3_ioremap() users to ioremap_prot().
This kills off the ancient p3_ioremap(), converting over to the more
generic ioremap_prot() instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 13:55:41 +09:00
Paul Mundt d57d64080d sh: Prevent 64-bit pgprot clobbering across ioremap implementations.
Presently 'flags' gets passed around a lot between the various ioremap
helpers and implementations, which is only 32-bits. In the X2TLB case
we use 64-bit pgprots which presently results in the upper 32bits being
chopped off (which handily include our read/write/exec permissions).

As such, we convert everything internally to using pgprot_t directly and
simply convert over with pgprot_val() where needed. With this in place,
transparent fixmap utilization for early ioremap works as expected.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 13:34:38 +09:00
Paul Mundt 0c54de146e Merge branch 'sh/stable-updates' 2010-01-18 20:47:37 +09:00
Kuninori Morimoto c718aff2e6 sh: ms7724: Correct sh-eth EEPROM polling timeout.
This converts the cpu_relax() to a udelay(1), which fixes up issues with
the EEPROM polling occasionally timing out.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18 20:47:15 +09:00
Matt Fleming 6f82b6ebb1 sh: Use ioremap_fixmed to map the SM501 DRAM config register
We need to write to the DRAM config register very early and at such an
early stage ioremap() is not available. So use ioremap_fixed() to map
the register.

The reason that we are avoiding using the legacy P2 mapping is that
there will come a day when the legacy P2 mappings no longer exist.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-01-16 14:31:44 +00:00
Paul Mundt 7dcaa8e8e6 sh: Generalize SH7786 PCIe support.
Previously this was only built in for Urquell boards, but the same
approach can be used on SDK7786 now that the mode pin reading is
supported, so make it generic to SH7786.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 19:13:56 +09:00
Paul Mundt 6f832e8aab sh: mach-sdk7786: mode pins support.
This wires up the mode pins support on the SDK7786. The pins are
standard SH7786 pins, and all are fixed in software. Needed for the
clock framework, PCIe, and so forth.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 16:31:04 +09:00
Paul Mundt a09d2831b3 sh: heartbeat: Update boards for access size hinting.
This updates the existing boards that specify the register width through
platform data to use the resource flags instead. This eliminates platform
data completely in most cases, and permits further improvement in the
heartbeat driver as well as shrinking the overall private data size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:24:34 +09:00
Paul Mundt 2267c7875b sh: mach-sdk7786: heartbeat support.
Hand off the user LEDs to the heartbeat driver.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:11:30 +09:00
NISHIMOTO Hiroki ea44078341 sh: mach-ecovec24: Add motion sensor driver support.
This patch adds support for the lis3lv02d motion sensor connected via
i2c on the Ecovec board. Tested with evtest.

Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 08:25:00 +09:00
Paul Mundt 02bf6cc72c sh: Preliminary SDK7786 board support.
This stubs in some preliminary board support for the RTE SDK7786.

This is quite stunted at the moment, and primarily builds on top of the
system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity,
with initial peripheral support restricted to the debug ethernet.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14 20:58:58 +09:00
Paul Mundt 53e6d8e006 sh: mach-se: Convert SE7343 FPGA to dynamic IRQ allocation.
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA
interrupt controller and switches over to a completely dynamic set.
No assumptions regarding a contiguous range are made, and the platform
resources themselves need to be filled in lazily.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-12 13:37:04 +09:00
Kuninori Morimoto 9503e891d2 sh: mach-ecovec24: setup.c detailed correction
o remove unused define
o add device name comment

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24 14:59:51 +09:00
Linus Torvalds 9b2831704e Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits)
  sh: Fix test of unsigned in se7722_irq_demux()
  sh: mach-ecovec24: Add FSI sound support
  sh: mach-ecovec24: Add mt9t112 camera support
  sh: mach-ecovec24: Add tw9910 support
  sh: MSIOF/mmc_spi platform data for the Ecovec24 board
  sh: ms7724se: Add ak4642 support
  sh: Fix up FPU build for SH5
  sh: Remove old early serial console code V2
  sh: sh5 scif pdata (sh5-101/sh5-103)
  sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)
  sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)
  sh: sh4 scif pdata (sh7750/sh7760/sh4-202)
  sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)
  sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg)
  sh: sh2 scif pdata (sh7616)
  sh-sci: Extend sh-sci driver with early console V2
  sh: Stub in P3 ioremap support for nommu parts.
  sh: wire up vmallocinfo support in ioremap() implementations.
  sh: Make the unaligned trap handler always obey notification levels.
  sh: Couple kernel and user write page perm bits for CONFIG_X2TLB
  ...
2009-12-16 10:29:52 -08:00
Guennadi Liakhovetski a6b5f2008a V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict sizes, add platform data
It has been experimentally found out, that the sensor only supports up to
512x384 video output and also has some restrictions on minimum scale. We
disable non-working size ranges until, maybe, someone finds out how to properly
set them up. Also add cropping support, an auto white balance control, platform
data to specify master clock frequency and polarity of the IOCTL pin.

 create mode 100644 include/media/rj54n1cb0c.h

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:30 -02:00
Guennadi Liakhovetski 760697beca V4L/DVB (13659): soc-camera: convert to the new mediabus API
Convert soc-camera core and all soc-camera drivers to the new mediabus
API. This also takes soc-camera client drivers one step closer to also be
usable with generic v4l2-subdev host drivers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:29 -02:00
Guennadi Liakhovetski 0f4482940a V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in struct soc_camera_link
After this change drivers can be further extended to not fail, if they don't
get platform data, but to use defaults.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:19 -02:00
Roel Kluin 204fc390d8 sh: Fix test of unsigned in se7722_irq_demux()
se7722_fpga_irq[] is unsigned so the test does not work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16 13:26:53 +09:00
Kuninori Morimoto 1980fdc4df sh: mach-ecovec24: Add FSI sound support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:03:08 +09:00
Kuninori Morimoto 9aa25d6449 sh: mach-ecovec24: Add mt9t112 camera support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:03:07 +09:00
Kuninori Morimoto 207efd07e8 sh: mach-ecovec24: Add tw9910 support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:02:46 +09:00