Commit Graph

60 Commits

Author SHA1 Message Date
Aaro Koskinen 651d19fb10 MIPS: Octeon: Support APPENDED_DTB
Use appended DTB when available.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11115/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12 11:35:48 +01:00
Matt Bennett 66803dd919 MIPS: Octeon: Fix kernel panic on startup from memory corruption
During development it was found that a number of builds would panic
during the kernel init process, more specifically in 'delayed_fput()'.
The panic showed the kernel trying to access a memory address of
'0xb7fdc00' while traversing the 'delayed_fput_list' structure.
Comparing this memory address to the value of the pointer used on
builds that did not panic confirmed that the pointer on crashing
builds must have been corrupted at some stage earlier in the init
process.

By traversing the list earlier and earlier in the code it was found
that 'plat_mem_setup()' was responsible for corrupting the list.
Specifically the line:

    memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
			__pa_symbol(&__init_end), -1,
			0x100000,
			CVMX_BOOTMEM_FLAG_NO_LOCKING);

Which would eventually call:

    cvmx_bootmem_phy_set_size(new_ent_addr,
		cvmx_bootmem_phy_get_size
		(ent_addr) -
		(desired_min_addr -
			ent_addr));

Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list')
and the second argument (size)=0xb7fdc00 (the address causing the
kernel panic). The job of this part of 'plat_mem_setup()' is to
allocate chunks of memory for the kernel to use. At the start of
each chunk of memory the size of the chunk is written, hence the
value 0xb7fdc00 is written onto memory at 0x4800000, therefore the
kernel panics when it goes back to access 'delayed_fput_list' later
on in the initialisation process.

On builds that were not crashing it was found that the compiler had
placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted
(but something else in memory was overwritten).

As can be seen in the first function call above the code begins to
allocate chunks of memory beginning from the symbol '__init_end'.
The MIPS linker script (vmlinux.lds.S) however defines the .bss
section to begin after '__init_end'. Therefore memory within the
.bss section is allocated to the kernel to use (System.map shows
'delayed_fput_list' and other kernel structures to be in .bss).

To stop the kernel panic (and the .bss section being corrupted)
memory should begin being allocated from the symbol '_end'.

Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: aleksey.makarov@auriga.com
Patchwork: https://patchwork.linux-mips.org/patch/11251/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02 19:19:55 +02:00
Aaro Koskinen aa816c1b39 MIPS: mark prom_free_prom_memory() everywhere with __init
On OCTEON the function is non-trivial and we can potentially even save
some memory.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9338/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:21:58 +02:00
Chandrakala Chavva fe2360f8f5 MIPS: OCTEON: Use correct CSR to soft reset
This fixes reboot for Octeon III boards

[ralf@linux-mips.org: Dropped segment for function cvmx_reset_octeon()
which was removed by the preceeding commit.]

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9464/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:21:44 +02:00
David Daney 24d4e7f642 MIPS: OCTEON: Add semaphore to serialize bootbus accesses.
Some hardware blocks attached to the OCTEON bootbus run asynchronously
to accesses from the CPUs.  These include MMC/SD host, CF(when using
DMA), and NAND controller.  A bus error, or corrupt data may occur if
a CPU is trying to access a bootbus connected device at the same time
the bus is running asynchronous operations.

To work around these problems we add this semaphore that must be
acquired before initiating bootbus activity.  Subsequent patches will
add users for this.

Signed-off-by: David Daney <david.daney@cavium.com>
[aleksey.makarov@auriga.com: combine the patches]
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9459/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:21:42 +02:00
Chandrakala Chavva ac6d9b3a03 MIPS: OCTEON: More OCTEONIII support
Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII.

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8945/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:32:46 +01:00
David Daney 726da2f82a MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8943/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:59 +01:00
David Daney debe6a623d MIPS: OCTEON: Update octeon-model.h code for new SoCs.
Add coverage for OCTEON III models.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8942/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:43 +01:00
David Daney e3d0ead59f MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
Make messages refer to all CN6XXX.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8941/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:27 +01:00
David Daney ac655fb762 MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
The wide multiplier is twice as wide, so we need to save twice as much
state.  Detect the multiplier type (CPU type) at start up and install
model specific handlers.

[aleksey.makarov@auriga.com:
	conflict resolution,
	support for old compilers]

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8933/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:28:29 +01:00
Masanari Iida 6774def642 treewide: fix typo in printk and Kconfig
This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20 14:56:11 +01:00
David Daney b61cd31ee6 MIPS: Octeon: Remove special case for simulator command line.
There is no reason to have the kernel to append commands when running
under the simulator, the simulator is perfectly capable of supplying
the necessary command line arguments.  Furthermore, if the simulator
needs something different than what is hard coded in the kernel, it
cannot get it if the kernel overrides it.

Fix/Simplify the whole thing by removing this bit.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8152/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22 19:37:03 +02:00
Aaro Koskinen 608308682a MIPS: OCTEON: make get_system_type() thread-safe
get_system_type() is not thread-safe on OCTEON. It uses static data,
also more dangerous issue is that it's calling cvmx_fuse_read_byte()
every time without any synchronization. Currently it's possible to get
processes stuck looping forever in kernel simply by launching multiple
readers of /proc/cpuinfo:

	(while true; do cat /proc/cpuinfo > /dev/null; done) &
	(while true; do cat /proc/cpuinfo > /dev/null; done) &
	...

Fix by initializing the system type string only once during the early
boot.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: stable@vger.kernel.org
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7437/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2014-08-19 18:24:42 +02:00
Sergey Ryazanov 950e97ca50 MIPS: Add common plat_irq_dispatch declaration
Add common declaration to get rid of following sparse warning: "symbol
'plat_irq_dispatch' was not declared. Should it be static?"

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-19 13:30:45 +02:00
Linus Torvalds 82abb273d8 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 - three fixes for 3.15 that didn't make it in time
 - limited Octeon 3 support.
 - paravirtualization support
 - improvment to platform support for Netlogix SOCs.
 - add support for powering down the Malta eval board in software
 - add many instructions to the in-kernel microassembler.
 - add support for the BPF JIT.
 - minor cleanups of the BCM47xx code.
 - large cleanup of math emu code resulting in significant code size
   reduction, better readability of the code and more accurate
   emulation.
 - improvments to the MIPS CPS code.
 - support C3 power status for the R4k count/compare clock device.
 - improvments to the GIO support for older SGI workstations.
 - increase number of supported CPUs to 256; this can be reached on
   certain embedded multithreaded ccNUMA configurations.
 - various small cleanups, updates and fixes

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits)
  MIPS: IP22/IP28: Improve GIO support
  MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX
  DEC: Document the R4k MB ASIC mini interrupt controller
  DEC: Add self as the maintainer
  MIPS: Add microMIPS MSA support.
  MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents.
  MIPS: Replace obsolete strict_strto call with kstrto
  MIPS: BFP: Simplify code slightly.
  MIPS: Call find_vma with the mmap_sem held
  MIPS: Fix 'write_msa_##' inline macro.
  MIPS: Fix MSA toolchain support detection.
  mips: Update the email address of Geert Uytterhoeven
  MIPS: Add minimal defconfig for mips_paravirt
  MIPS: Enable build for new system 'paravirt'
  MIPS: paravirt: Add pci controller for virtio
  MIPS: Add code for new system 'paravirt'
  MIPS: Add functions for hypervisor call
  MIPS: OCTEON: Add OCTEON3 to __get_cpu_type
  MIPS: Add function get_ebase_cpunum
  MIPS: Add minimal support for OCTEON3 to c-r4k.c
  ...
2014-06-09 18:10:34 -07:00
Paul Bolle d83d44c0e0 MIPS: Octeon: Remove checks for CONFIG_CAVIUM_GDB
Three checks for CONFIG_CAVIUM_GDB were added in v2.6.29. But the
Kconfig symbol CAVIUM_GDB was never added to the tree. Remove these
checks.

Also remove the last reference to octeon_get_boot_debug_flag(). There is
no definition of that function anyway.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>)
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6976/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23 15:12:39 +02:00
Paul Bolle af59674f64 MIPS: Remove check for CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
A check for CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC was added in v2.6.29,
but without the related Kconfig symbol. Remove this check.

Also remove the test for an "ecc_verbose" kernel parameter. It is
undocumented and has no effect anyway.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23 15:12:38 +02:00
Rob Herring 8c97cec990 mips: octeon: convert to use unflatten_and_copy_device_tree
The octeon FDT code can be simplified by using
unflatten_and_copy_device_tree function. This removes all accesses to
FDT header data by the arch code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Tested-by: Grant Likely <grant.likely@linaro.org>
2014-04-30 00:55:53 -05:00
Ralf Baechle f7777dcc75 MIPS: Panic messages should not end in \n.
Panic() is going to add a \n itself and it's annoying if a panic message rolls
of the screen on a device with no scrollback.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29 21:24:19 +01:00
Aaro Koskinen d8b74276f5 MIPS: cavium-octeon: fix I/O space setup on non-PCI systems
Fix I/O space setup, so that on non-PCI systems using inb()/outb()
won't crash the system. Some drivers may try to probe I/O space and for
that purpose we can just allocate some normal memory initially. Drivers
trying to reserve a region will fail early as we set the size to 0. If
a real I/O space is present, the PCI/PCIe support code will re-adjust
the values accordingly.

Tested with EdgeRouter Lite by enabling CONFIG_SERIO_I8042 that caused
the originally reported crash.

Reported-by: Faidon Liambotis <paravoid@debian.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5626/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-26 15:31:54 +02:00
Ralf Baechle 6ac5310e64 Merge branch '3.10-fixes' into mips-for-linux-next
This that should have been fixed but weren't, way to much, intrusive
and late.
2013-07-12 18:11:43 +02:00
David Daney d949b4fe6d MIPS: Octeon: Don't clobber bootloader data structures.
Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself.  The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel.  Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.

The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-21 18:07:01 +02:00
Ralf Baechle 39205750ef MIPS: Oceton: Fix build error.
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:

arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 16:28:16 +02:00
David Daney 02a49d5144 MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_DECODE_RSL
This config option doesn't exist any more, remove the leftover code
for it too.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5302/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-10 18:01:25 +02:00
David Daney 38c3c0f673 MIPS: OCTEON: Improve _machine_halt implementation.
As noted by Wladislav Wiebe:
   $ halt
   ..
   Sent SIGKILL to all processes
   Requesting system halt
   [66.729373] System halted.
   [66.733244]
   [66.734761] =====================================
   [66.739473] [ BUG: lock held at task exit time! ]
   [66.744188] 3.8.7-0-sampleversion-fct #49 Tainted: G           O
   [66.750202] -------------------------------------
   [66.754913] init/21479 is exiting with locks still held!
   [66.760234] 1 lock held by init/21479:
   [66.763990]  #0:  (reboot_mutex){+.+...}, at: [<ffffffff801776c8>] SyS_reboot+0xe0/0x218
   [66.772165]
   [66.772165] stack backtrace:
   [66.776532] Call Trace:
   [66.778992] [<ffffffff805780a8>] dump_stack+0x8/0x34
   [66.783972] [<ffffffff801618b0>] do_exit+0x610/0xa70
   [66.788948] [<ffffffff801777a8>] SyS_reboot+0x1c0/0x218
   [66.794186] [<ffffffff8013d6a4>] handle_sys64+0x44/0x64

This is an alternative fix to the one sent by Wladislav.  We kill the
watchdog for each CPU and then spin in WAIT with interrupts disabled.
This is the lowest power mode for the OCTEON.  If we were to spin with
interrupts enabled, we would get a continual stream of warning messages
and backtraces from the lockup detector, so I chose to disable
interrupts.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Maxim Uvarov <muvarov@gmail.com>
Cc: Wladislav Wiebe <wladislav.kw@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5324/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-06 16:11:26 +02:00
EunBong Song ed1197f931 MIPS: Fix build error cavium-octeon without CONFIG_SMP
Singed-off-by: EunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-05 15:10:39 +02:00
Ralf Baechle 7034228792 MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01 10:00:22 +01:00
David Daney e1ced09797 MIPS/EDAC: Improve OCTEON EDAC support.
Some initialization errors are reported with the existing OCTEON EDAC
support patch.  Also some parts have more than one memory controller.

Fix the errors and add multiple controllers if present.

Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13 18:15:26 +01:00
Ralf Baechle abe77f90dc MIPS: Octeon: Add kexec and kdump support
[ralf@linux-mips.org: Original patch by Maxim Uvarov <muvarov@gmail.com>
with plenty of further shining, polishing, debugging and testing by me.]

Signed-off-by: Maxim Uvarov <muvarov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: kexec@lists.infradead.org
Cc: horms@verge.net.au
Patchwork: https://patchwork.linux-mips.org/patch/1026/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13 17:00:39 +01:00
Ralf Baechle 5456bd26ae MIPS: Octeon: Simplify code by assuming CONFIG_64BIT is always set.
No 32-bit kernels supported on Octeon.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12 16:52:06 +01:00
Ralf Baechle 4fe64af7da MIPS: Octeon: Remove use of CONFIG_64BIT_PHYS_ADDR.
Only supporting 64-bit kernels there is no point in depending on
this symbol.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12 16:52:06 +01:00
Ralf Baechle ce4625f431 MIPS: Octeon: Remove highmem code.
On Cavium hardware only 64-bit kernels are supported so CONFIG_HIGHMEM
is never set.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12 16:52:06 +01:00
Ralf Baechle f65aad4177 MIPS: Cavium: Add EDAC support.
Drivers for EDAC on Cavium.  Supported subsystems are:

 o CPU primary caches.  These are parity protected only, so only error
   reporting.
 o Second level cache - ECC protected, provides SECDED.
 o Memory: ECC / SECDEC if used with suitable DRAM modules.  The driver will
   will only initialize if ECC is enabled on a system so is safe to run on
   non-ECC memory.
 o PCI: Parity error reporting

Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-12-12 16:48:49 +01:00
David Daney 70a26a219c MIPS: Octeon: Add octeon_io_clk_delay() function.
Also cleanup and fix octeon_init_cvmcount()

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: David S. Miller <davem@davemloft.net>
2012-08-31 11:48:48 -07:00
David Daney 7ed1815296 MIPS: Octeon: Initialize and fixup device tree.
If a compiled in device tree template is used, trim out unwanted parts
based on legacy platform probing.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3935/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:52 +01:00
Paul Gortmaker f9ded5692c MIPS: Fix several implicit uses of export.h/module.h
These will show up as a build failure once we clean up a
misuse of module.h in the mips termios header.

Uses export.h: (EXPORT_SYMBOL)
   arch/mips/cavium-octeon/setup.c
   arch/mips/pmc-sierra/yosemite/setup.c
   arch/mips/rb532/devices.c
   arch/mips/sni/setup.c

Uses module.h: (symbol_get/put)
   arch/mips/alchemy/devboards/db1200.c

Uses module.h: (print_modules)
   arch/mips/kernel/traps.c

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3448/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-15 17:48:50 +02:00
David Howells b81947c646 Disintegrate asm/system.h for MIPS
Disintegrate asm/system.h for MIPS.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
cc: linux-mips@linux-mips.org
2012-03-28 18:30:02 +01:00
Ralf Baechle 39b741431a Merge branch 'next/generic' into mips-for-linux-next 2012-01-11 15:41:47 +01:00
David Daney 43064c0c8e MIPS: Handle initmem in systems with kernel not in add_memory_region() mem
This patch addresses a couple of related problems:

1) The kernel may reside in physical memory outside of the ranges set
   by plat_mem_setup().  If this is the case, init mem cannot be
   reused as it resides outside of the range of pages that the kernel
   memory allocators control.

2) initrd images might be loaded in physical memory outside of the
   ranges set by plat_mem_setup().  The memory likewise cannot be
   reused.  The patch doesn't handle this specific case, but the
   infrastructure is useful for future patches that do.

The crux of the problem is that there are memory regions that need be
memory_present(), but that cannot be free_bootmem() at the time of
arch_mem_init().  We create a new type of memory (BOOT_MEM_INIT_RAM)
for use with add_memory_region().  Then arch_mem_init() adds the init
mem with this type if the init mem is not already covered by existing
ranges.

When memory is being freed into the bootmem allocator, we skip the
BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal
them as memory_present().  This way when they are later freed, the
necessary memory manager structures have initialized and the Sparse
allocater is prevented from crashing.

The Octeon specific code that handled this case is removed, because
the new general purpose code handles the case.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1988/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:45 +00:00
Ralf Baechle ab75dc02c1 MIPS: Fix up inconsistency in panic() string argument.
Panic() invokes printk() to add a \n internally, so panic arguments should
not themselves end in \n.  Panic invocations in arch/mips and elsewhere
are inconsistently sometimes terminating in \n, sometimes not.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:01:45 +00:00
Chandrakala Chavva 7716e6548a Octeon: Fix interrupt irq settings for performance counters.
Octeon uses different interrupt irq for timer and performance counters.
Set CvmCtl[IPPCI] to correct irq value very early.

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/2085/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
David Daney 0c3263870f MIPS: Octeon: Rewrite interrupt handling code.
This includes conversion to new style irq_chip functions, and
correctly enabling/disabling per-CPU interrupts.

The hardware interrupt bit to irq number mapping is now done with a
flexible map, instead of by bit twiddling the irq number.

[ tglx: Adjusted to new irq_cpu_on/offline callbacks and
        __irq_set_affinity_lock ]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-5-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:06 +02:00
David Daney c9941158fd MIPS: Octeon: Apply CN63XXP1 errata workarounds.
The CN63XXP1 needs a couple of workarounds to ensure memory is not written
in unexpected ways.

All PREF with hints in the range 0-4,6-24 are replaced with PREF 28.  We
pass a flag to the assembler to cover compiler generated code, and patch
uasm for the dynamically generated code.

The write buffer threshold is reduced to 4.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1672/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:43 +01:00
David Daney e195aa3039 MIPS: Octeon: Add octeon_get_io_clock_rate() for cn63xx
Starting with cn63xx Octeon I/O blocks are clocked at a different rate
than the CPU.  Add a new function octeon_get_io_clock_rate() that
yields the I/O clock rate.

Also rearrange octeon_get_clock_rate() to get the value from the saved
sysinfo structure.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:40 +01:00
David Daney 3b29dadff9 MIPS: Octeon: Remove bogus code from octeon_get_clock_rate()
We can run with any simulator clock rate.  Get rid of the code
overriding it to 6MHz.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:39 +01:00
David Daney 2b5987abaf MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
We reserve the 3.75GB - 4GB region of PCIe address space for device to
device transfers, making the corresponding physical memory under
direct mapping unavailable for DMA.

To allow for PCIe DMA to all physical memory we map this chunk of
physical memory with BAR1.  Because of the resulting discontinuity in
the mapping function, we remove a page of memory at each end of the
range so multi-page DMA buffers can never be allocated that span the
range.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1535/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:31 +01:00
David Daney ea435464a1 MIPS: Octeon: Export prom_putchar().
The forthcoming watchdog driver will use it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:21 +01:00
David Daney ca148125e6 MIPS: Octeon: Implement delays with cycle counter.
Power throttling make deterministic delay loops impossible.
Re-implement delays using the cycle counter.  This also allows us to
get rid of the code that calculates loops per jiffy.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1317/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:20 +01:00
Christoph Egger 723b7f812f MIPS: Cavium: Remove dead CONFIG_GDB_CONSOLE
CONFIG_GDB_CONSOLE doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: David Daney <ddaney@caviumnetworks.com>
To: Yang Shi <yang.shi@windriver.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
To: Tejun Heo <tj@kernel.org>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1368/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:00 +01:00