Commit Graph

449 Commits

Author SHA1 Message Date
Gui Jianfeng b9d8f4c73b cfq: Optimization for close cooperating queue searching
It doesn't make any sense to try to find out a close cooperating
queue if current cfqq is the only one in the group.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:03 +01:00
Corrado Zoccolo 573412b295 cfq-iosched: reduce write depth only if sync was delayed
The introduction of ramp-up formula for async queue depths has
slowed down dirty page reclaim, by reducing async write performance.
This patch makes sure the formula kicks in only when sync request
was recently delayed.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 12:32:55 +01:00
Vivek Goyal 878eaddd05 cfq-iosched: Do not access cfqq after freeing it
Fix a crash during boot reported by Jeff Moyer. Fix the issue of accessing
cfqq after freeing it.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-12-07 19:37:15 +01:00
Jens Axboe bb729bc98c cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
After the merge of the IO controller patches, booting on my megaraid
box ran much slower. Vivek Goyal traced it down to megaraid discovery
creating tons of devices, each suffering a grace period when they later
kill that queue (if no device is found).

So lets use call_rcu() to batch these deferred frees, instead of taking
the grace period hit for each one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-06 09:54:19 +01:00
Vivek Goyal 3e25206689 blkio: Implement dynamic io controlling policy registration
o One of the goals of block IO controller is that it should be able to
  support mulitple io control policies, some of which be operational at
  higher level in storage hierarchy.

o To begin with, we had one io controlling policy implemented by CFQ, and
  I hard coded the CFQ functions called by blkio. This created issues when
  CFQ is compiled as module.

o This patch implements a basic dynamic io controlling policy registration
  functionality in blkio. This is similar to elevator functionality where
  ioschedulers register the functions dynamically.

o Now in future, when more IO controlling policies are implemented, these
  can dynakically register with block IO controller.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Vivek Goyal 9d6a986c0b blkio: Export some symbols from blkio as its user CFQ can be a module
o blkio controller is inside the kernel and cfq makes use of interfaces
  exported by blkio. CFQ can be a module too, hence export symbols used
  by CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Shaohua Li 3c764b7a65 cfq-iosched: make nonrot check logic consistent
cfq_arm_slice_timer() has logic to disable idle window for SSD device. The same
thing should be done at cfq_select_queue() too, otherwise we will still see
idle window. This makes the nonrot check logic consistent in cfq.
Tests in a intel SSD with low_latency knob close, below patch can triple disk
thoughput for muti-thread sequential read.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 13:12:06 +01:00
Jens Axboe f2eecb9152 cfq-iosched: move IO controller declerations to a header file
They should not be declared inside some other file that's not related
to CFQ.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 10:06:35 +01:00
Vivek Goyal c04645e592 blkio: Wait on sync-noidle queue even if rq_noidle = 1
o rq_noidle() is supposed to tell cfq that do not expect a request after this
  one, hence don't idle. But this does not seem to work very well. For example
  for direct random readers, rq_noidle = 1 but there is next request coming
  after this. Not idling, leads to a group not getting its share even if
  group_isolation=1.

o The right solution for this issue is to scan the higher layers and set
  right flag (WRITE_SYNC or WRITE_ODIRECT). For the time being, this single
  line fix helps. This should not have any significant impact when we are
  not using cgroups. I will later figure out IO paths in higher layer and
  fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal ae30c28655 blkio: Implement group_isolation tunable
o If a group is running only a random reader, then it will not have enough
  traffic to keep disk busy and we will reduce overall throughput. This
  should result in better latencies for random reader though. If we don't
  idle on random reader service tree, then this random reader will experience
  large latencies if there are other groups present in system with sequential
  readers running in these.

o One solution suggested by corrado is that by default keep the random readers
  or sync-noidle workload in root group so that during one dispatch round
  we idle only once on sync-noidle tree. This means that all the sync-idle
  workload queues will be in their respective group and we will see service
  differentiation in those but not on sync-noidle workload.

o Provide a tunable group_isolation. If set, this will make sure that even
  sync-noidle queues go in their respective group and we wait on these. This
  provides stronger isolation between groups but at the expense of throughput
  if group does not have enough traffic to keep the disk busy.

o By default group_isolation = 0

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f26bd1f0a3 blkio: Determine async workload length based on total number of queues
o Async queues are not per group. Instead these are system wide and maintained
  in root group. Hence their workload slice length should be calculated
  based on total number of queues in the system and not just queues in the
  root group.

o As root group's default weight is 1000, make sure to charge async queue
  more in terms of vtime so that it does not get more time on disk because
  root group has higher weight.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f75edf2dc8 blkio: Wait for cfq queue to get backlogged if group is empty
o If a queue consumes its slice and then gets deleted from service tree, its
  associated group will also get deleted from service tree if this was the
  only queue in the group. That will make group loose its share.

o For the queues on which we have idling on and if these have used their
  slice, wait a bit for these queues to get backlogged again and then
  expire these queues so that group does not loose its share.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f8d461d692 blkio: Propagate cgroup weight updation to cfq groups
o Propagate blkio cgroup weight updation to associated cfq groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal 24610333d5 blkio: Drop the reference to queue once the task changes cgroup
o If a task changes cgroup, drop reference to the cfqq associated with io
  context and set cfqq pointer stored in ioc to NULL so that upon next request
  arrival we will allocate a  new queue in new group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 8682e1f15f blkio: Provide some isolation between groups
o Do not allow following three operations across groups for isolation.
	- selection of co-operating queues
	- preemtpions across groups
	- request merging across groups.

o Async queues are currently global and not per group. Allow preemption of
  an async queue if a sync queue in other group gets backlogged.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 220841906f blkio: Export disk time and sectors used by a group to user space
o Export disk time and sector used by a group to user space through cgroup
  interface.

o Also export a "dequeue" interface to cgroup which keeps track of how many
  a times a group was deleted from service tree. Helps in debugging.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 2868ef7b39 blkio: Some debugging aids for CFQ
o Some debugging aids for CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal b1c3576961 blkio: Take care of cgroup deletion and cfq group reference counting
o One can choose to change elevator or delete a cgroup. Implement group
  reference counting so that both elevator exit and cgroup deletion can
  take place gracefully.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25fb5169d4 blkio: Dynamic cfq group creation based on cgroup tasks belongs to
o Determine the cgroup IO submitting task belongs to and create the cfq
  group if it does not exist already.

o Also link cfqq and associated cfq group.

o Currently all async IO is mapped to root group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal dae739ebc4 blkio: Group time used accounting and workload context save restore
o This patch introduces the functionality to do the accounting of group time
  when a queue expires. This time used decides which is the group to go
  next.

o Also introduce the functionlity to save and restore the workload type
  context with-in group. It might happen that once we expire the cfq queue
  and group, a different group will schedule in and we will lose the context
  of the workload type. Hence save and restore it upon queue expiry.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 58ff82f34c blkio: Implement per cfq group latency target and busy queue avg
o So far we had 300ms soft target latency system wide. Now with the
  introduction of cfq groups, divide that latency by number of groups so
  that one can come up with group target latency which will be helpful
  in determining the workload slice with-in group and also the dynamic
  slice length of the cfq queue.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25bc6b0776 blkio: Introduce per cfq group weights and vdisktime calculations
o Bring in the per cfq group weight and how vdisktime is calculated for the
  group. Also bring in the functionality of updating the min_vdisktime of
  the group service tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 1fa8f6d68b blkio: Introduce the root service tree for cfq groups
o So far we just had one cfq_group in cfq_data. To create space for more than
  one cfq_group, we need to have a service tree of groups where all the groups
  can be queued if they have active cfq queues backlogged in these.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal f04a642463 blkio: Keep queue on service tree until we expire it
o Currently cfqq deletes a queue from service tree if it is empty (even if
  we might idle on the queue). This patch keeps the queue on service tree
  hence associated group remains on the service tree until we decide that
  we are not going to idle on the queue and expire it.

o This just helps in time accounting for queue/group and in implementation
  of rest of the patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal 615f0259e6 blkio: Implement macro to traverse each service tree in group
o Implement a macro to traverse each service tree in the group. This avoids
  usage of double for loop and special condition for idle tree 4 times.

o Macro is little twisted because of special handling of idle class service
  tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal cdb16e8f73 blkio: Introduce the notion of cfq groups
o This patch introduce the notion of cfq groups. Soon we will can have multiple
  groups of different weights in the system.

o Various service trees (prioclass and workload type trees), will become per
  cfq group. So hierarchy looks as follows.

			cfq_groups
			   |
			workload type
			   |
		        cfq queue

o When an scheduling decision has to be taken, first we select the cfq group
  then workload with-in the group and then cfq queue with-in the workload
  type.

o This patch just makes various workload service tree per cfq group and
  introduce the function to be able to choose a group for scheduling.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal bf79193710 blkio: Set must_dispatch only if we decided to not dispatch the request
o must_dispatch flag should be set only if we decided not to run the queue
  and dispatch the request.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Shaohua Li 474b18ccc2 cfq-iosched: no dispatch limit for single queue
Since commit 2f5cb7381b, each queue can send
up to 4 * 4 requests if only one queue exists. I wonder why we have such limit.
Device supports tag can send more requests. For example, AHCI can send 31
requests. Test (direct aio randread) shows the limits reduce about 4% disk
thoughput.
On the other hand, since we send one request one time, if other queue
pop when current is sending more than cfq_quantum requests, current queue will
stop send requests soon after one request, so sounds there is no big latency.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 12:58:05 +01:00
Jens Axboe 464191c65b Revert "cfq: Make use of service count to estimate the rb_key offset"
This reverts commit 3586e917f2.

Corrado Zoccolo <czoccolo@gmail.com> correctly points out, that we need
consistency of rb_key offset across groups. This means we cannot properly
use the per-service_tree service count. Revert this change.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-30 09:38:13 +01:00
Corrado Zoccolo 8e550632cc cfq-iosched: fix corner cases in idling logic
Idling logic was disabled in some corner cases, leading to unfair share
 for noidle queues.
 * the idle timer was not armed if there were other requests in the
   driver. unfortunately, those requests could come from other workloads,
   or queues for which we don't enable idling. So we will check only
   pending requests from the active queue
 * rq_noidle check on no-idle queue could disable the end of tree idle if
   the last completed request was rq_noidle. Now, we will disable that
   idle only if all the queues served in the no-idle tree had rq_noidle
   requests.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo 76280aff1c cfq-iosched: idling on deep seeky sync queues
Seeky sync queues with large depth can gain unfairly big share of disk
 time, at the expense of other seeky queues. This patch ensures that
 idling will be enabled for queues with I/O depth at least 4, and small
 think time. The decision to enable idling is sticky, until an idle
 window times out without seeing a new request.

The reasoning behind the decision is that, if an application is using
large I/O depth, it is already optimized to make full utilization of
the hardware, and therefore we reserve a slice of exclusive use for it.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e4a229196a cfq-iosched: fix no-idle preemption logic
An incoming no-idle queue should preempt the active no-idle queue
 only if the active queue is idling due to service tree empty.
 Previous code was buggy in two ways:
 * it relied on service_tree field to be set on the active queue, while
   it is not set when the code is idling for a new request
 * it didn't check for the service tree empty condition, so could lead to
   LIFO behaviour if multiple queues with depth > 1 were preempting each
   other on an non-NCQ device.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e459dd08f4 cfq-iosched: fix ncq detection code
CFQ's detection of queueing devices initially assumes a queuing device
and detects if the queue depth reaches a certain threshold.
However, it will reconsider this choice periodically.

Unfortunately, if device is considered not queuing, CFQ will force a
unit queue depth for some workloads, thus defeating the detection logic.
This leads to poor performance on queuing hardware,
since the idle window remains enabled.

Given this premise, switching to hw_tag = 0 after we have proved at
least once that the device is NCQ capable is not a good choice.

The new detection code starts in an indeterminate state, in which CFQ behaves
as if hw_tag = 1, and then, if for a long observation period we never saw
large depth, we switch to hw_tag = 0, otherwise we stick to hw_tag = 1,
without reconsidering it again.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:02:57 +01:00
Corrado Zoccolo c16632bab1 cfq-iosched: cleanup unreachable code
cfq_should_idle returns false for no-idle queues that are not the last,
so the control flow will never reach the removed code in a state that
satisfies the if condition.
The unreachable code was added to emulate previous cfq behaviour for
non-NCQ rotational devices. My tests show that even without it, the
performances and fairness are comparable with previous cfq, thanks to
the fact that all seeky queues are grouped together, and that we idle at
the end of the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:46:46 +01:00
Gui Jianfeng 3586e917f2 cfq: Make use of service count to estimate the rb_key offset
For the moment, different workload cfq queues are put into different
service trees. But CFQ still uses "busy_queues" to estimate rb_key
offset when inserting a cfq queue into a service tree. I think this
isn't appropriate, and it should make use of service tree count to do
this estimation. This patch is for for-2.6.33 branch.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:14:11 +01:00
Randy Dunlap ad5ebd2fa2 block: jiffies fixes
Use HZ-independent calculation of milliseconds.
Add jiffies.h where it was missing since functions or macros
from it are used.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-11 13:47:45 +01:00
Corrado Zoccolo cf7c25cf91 cfq-iosched: fix next_rq computation
Cfq has a bug in computation of next_rq, that affects transition
between multiple sequential request streams in a single queue
(e.g.: two sequential buffered writers of the same priority),
causing the alternation between the two streams for a transient period.

  8,0    1    18737     0.260400660  5312  D   W 141653311 + 256
  8,0    1    20839     0.273239461  5400  D   W 141653567 + 256
  8,0    1    20841     0.276343885  5394  D   W 142803919 + 256
  8,0    1    20843     0.279490878  5394  D   W 141668927 + 256
  8,0    1    20845     0.292459993  5400  D   W 142804175 + 256
  8,0    1    20847     0.295537247  5400  D   W 141668671 + 256
  8,0    1    20849     0.298656337  5400  D   W 142804431 + 256
  8,0    1    20851     0.311481148  5394  D   W 141668415 + 256
  8,0    1    20853     0.314421305  5394  D   W 142804687 + 256
  8,0    1    20855     0.318960112  5400  D   W 142804943 + 256

The fix makes sure that the next_rq is computed from the last
dispatched request, and not affected by merging.

  8,0    1    37776     4.305161306     0  D   W 141738087 + 256
  8,0    1    37778     4.308298091     0  D   W 141738343 + 256
  8,0    1    37780     4.312885190     0  D   W 141738599 + 256
  8,0    1    37782     4.315933291     0  D   W 141738855 + 256
  8,0    1    37784     4.319064459     0  D   W 141739111 + 256
  8,0    1    37786     4.331918431  5672  D   W 142803007 + 256
  8,0    1    37788     4.334930332  5672  D   W 142803263 + 256
  8,0    1    37790     4.337902723  5672  D   W 142803519 + 256
  8,0    1    37792     4.342359774  5672  D   W 142803775 + 256
  8,0    1    37794     4.345318286     0  D   W 142804031 + 256

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-08 17:16:46 +01:00
Jens Axboe e00ef79971 cfq-iosched: get rid of the coop_preempt flag
We need to rework this logic post the cooperating cfq_queue merging,
for now just get rid of it and Jeff Moyer will fix the fall out.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 08:54:55 +01:00
Jens Axboe 125c4f221a cfq-iosched: fix merge error
We ended up with testing the same condition twice, pretty
pointless. Remove that first if.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:25:45 +01:00
Jens Axboe 2058297d2d Merge branch 'for-linus' into for-2.6.33
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:14:39 +01:00
Jens Axboe 150e6c67f4 Merge branch 'cfq-2.6.33' into for-2.6.33 2009-11-03 21:12:10 +01:00
Shaohua Li 4b27e1bb44 cfq-iosched: limit coop preemption
CFQ has an optimization for cooperated applications. if several
io-context have close requests, they will get boost. But the
optimization get abused. Considering thread a, b, which work on one
file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s
+5, ... Both a and b are sequential read, so they can open idle window.
a reads a sector s and goes to idle window and wakeup b. b reads sector
s+1, since in current implementation, cfq_should_preempt() thinks a and
b are cooperators, b will preempt a. b then reads sector s+1 and goes to
idle window and wakeup a. for the same reason, a will preempt b and
reads s+2. a and b will continue the circle. The circle will be very
long, and a and b will occupy whole disk queue. Other applications will
nearly have no chance to run.

Fix this limiting coop preempt until a queue is scheduled normally
again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:25:02 +01:00
Jens Axboe e6ec4fe245 cfq-iosched: fix bad return value cfq_should_preempt()
Commit a6151c3a5c inadvertently reversed
a preempt condition check, potentially causing a performance regression.
Make the meta check correct again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:21:35 +01:00
Corrado Zoccolo dddb74519a cfq-iosched: simplify prio-unboost code
Eliminate redundant checks.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-02 10:40:37 +01:00
Jens Axboe 5869619cb5 cfq-iosched: fix style issue in cfq_get_avg_queues()
Line breaks and bad brace placement.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:27:07 +01:00
Corrado Zoccolo 718eee0579 cfq-iosched: fairness for sync no-idle queues
Currently no-idle queues in cfq are not serviced fairly:
even if they can only dispatch a small number of requests at a time,
they have to compete with idling queues to be serviced, experiencing
large latencies.

We should notice, instead, that no-idle queues are the ones that would
benefit most from having low latency, in fact they are any of:
* processes with large think times (e.g. interactive ones like file
  managers)
* seeky (e.g. programs faulting in their code at startup)
* or marked as no-idle from upper levels, to improve latencies of those
  requests.

This patch improves the fairness and latency for those queues, by:
* separating sync idle, sync no-idle and async queues in separate
  service_trees, for each priority
* service all no-idle queues together
* and idling when the last no-idle queue has been serviced, to
  anticipate for more no-idle work
* the timeslices allotted for idle and no-idle service_trees are
  computed proportionally to the number of processes in each set.

Servicing all no-idle queues together should have a performance boost
for NCQ-capable drives, without compromising fairness.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo a6d44e982d cfq-iosched: enable idling for last queue on priority class
cfq can disable idling for queues in various circumstances.
When workloads of different priorities are competing, if the higher
priority queue has idling disabled, lower priority queues may steal
its disk share. For example, in a scenario with an RT process
performing seeky reads vs a BE process performing sequential reads,
on an NCQ enabled hardware, with low_latency unset,
the RT process will dispatch only the few pending requests every full
slice of service for the BE process.

The patch solves this issue by always performing idle on the last
queue at a given priority class > idle. If the same process, or one
that can pre-empt it (so at the same priority or higher), submits a
new request within the idle window, the lower priority queue won't
dispatch, saving the disk bandwidth for higher priority ones.

Note: this doesn't touch the non_rotational + NCQ case (no hardware
to test if this is a benefit in that case).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo c0324a020e cfq-iosched: reimplement priorities using different service trees
We use different service trees for different priority classes.
This allows a simplification in the service tree insertion code, that no
longer has to consider priority while walking the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo aa6f6a3de1 cfq-iosched: preparation to handle multiple service trees
We embed a pointer to the service tree in each queue, to handle multiple
service trees easily.
Service trees are enriched with a counter.
cfq_add_rq_rb is invoked after putting the rq in the fifo, to ensure
that all fields in rq are properly initialized.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo 5db5d64277 cfq-iosched: adapt slice to number of processes doing I/O
When the number of processes performing I/O concurrently increases,
a fixed time slice per process will cause large latencies.

This patch, if low_latency mode is enabled,  will scale the time slice
assigned to each process according to a 300ms target latency.

In order to keep fairness among processes:
* The number of active processes is computed using a special form of
running average, that quickly follows sudden increases (to keep latency low),
and decrease slowly (to have fairness in spite of rapid decreases of this
value).

To safeguard sequential bandwidth, we impose a minimum time slice
(computed using 2*cfq_slice_idle as base, adjusted according to priority
and async-ness).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Shaohua Li 1a1238a7dd cfq-iosched: improve hw_tag detection
If active queue hasn't enough requests and idle window opens, cfq will not
dispatch sufficient requests to hardware. In such situation, current code
will zero hw_tag. But this is because cfq doesn't dispatch enough requests
instead of hardware queue doesn't work. Don't zero hw_tag in such case.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-27 08:46:23 +01:00
Jeff Moyer e6c5bc737a cfq: break apart merged cfqqs if they stop cooperating
cfq_queues are merged if they are issuing requests within the mean seek
distance of one another.  This patch detects when the coopearting stops and
breaks the queues back up.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer b3b6d0408c cfq: change the meaning of the cfqq_coop flag
The flag used to indicate that a cfqq was allowed to jump ahead in the
scheduling order due to submitting a request close to the queue that
just executed.  Since closely cooperating queues are now merged, the flag
holds little meaning.  Change it to indicate that multiple queues were
merged.  This will later be used to allow the breaking up of merged queues
when they are no longer cooperating.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer df5fe3e8e1 cfq: merge cooperating cfq_queues
When cooperating cfq_queues are detected currently, they are allowed to
skip ahead in the scheduling order.  It is much more efficient to
automatically share the cfq_queue data structure between cooperating processes.
Performance of the read-test2 benchmark (which is written to emulate the
dump(8) utility) went from 12MB/s to 90MB/s on my SATA disk.  NFS servers
with multiple nfsd threads also saw performance increases.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer b2c18e1e08 cfq: calculate the seek_mean per cfq_queue not per cfq_io_context
async cfq_queue's are already shared between processes within the same
priority, and forthcoming patches will change the mapping of cic to sync
cfq_queue from 1:1 to 1:N.  So, calculate the seekiness of a process
based on the cfq_queue instead of the cfq_io_context.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:46 +01:00
Corrado Zoccolo 355b659c87 cfq-iosched: avoid probable slice overrun when idling
If the average think time is larger than the remaining time slice
for any given queue, don't allow it to idle. A succesful idle also
means that we need to dispatch and complete a request, so if we don't
even have time left for the idle process, we would overrun the slice
in any case.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-08 08:43:32 +02:00
Jens Axboe a6151c3a5c cfq-iosched: apply bool value where we return 0/1
Saves 16 bytes of text, woohoo. But the more important point is
that it makes the code more readable when returning bool for 0/1
cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07 20:02:57 +02:00
Corrado Zoccolo ec60e4f674 cfq-iosched: fix think time allowed for seekers
CFQ enables idle only for processes that think less than the allowed
idle time. Since idle time is lower for seeky queues, we should use the
correct value in the comparison.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07 19:51:54 +02:00
Jens Axboe b9c8946b19 cfq-iosched: fix the slice residual sign
We should subtract the slice residual from the rb tree key, since
a negative residual count indicates that the cfqq overran its slice
the last time. Hence we want to add the overrun time, to position
it a bit further away in the service tree.

Reported-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 21:09:32 +02:00
Jens Axboe 0b182d617e cfq-iosched: abstract out the 'may this cfqq dispatch' logic
Makes the whole thing easier to read, cfq_dispatch_requests() was
a bit messy before.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:49:37 +02:00
Jens Axboe 23e018a1b0 block: get rid of kblock_schedule_delayed_work()
It was briefly introduced to allow CFQ to to delayed scheduling,
but we ended up removing that feature again. So lets kill the
function and export, and just switch CFQ back to the normal work
schedule since it is now passing in a '0' delay from all call
sites.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:58 +02:00
Corrado Zoccolo 48e025e63a cfq-iosched: fix possible problem with jiffies wraparound
The RR service tree is indexed by a key that is relative to current jiffies.
This can cause problems on jiffies wraparound.

The patch fixes it using time_before comparison, and changing
the add_front path to use a relative number, too.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:55 +02:00
Jens Axboe 30996f40bf cfq-iosched: fix issue with rq-rq merging and fifo list ordering
cfq uses rq->start_time as the fifo indicator, but that field may
get modified prior to cfq doing it's fifo list adjustment when
a request gets merged with another request. This can cause the
fifo list to become unordered.

Reported-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:39 +02:00
Jens Axboe e00c54c36a cfq-iosched: don't delay async queue if it hasn't dispatched at all
We cannot delay for the first dispatch of the async queue if it
hasn't dispatched at all, since that could present a local user
DoS attack vector using an app that just did slow timed sync reads
while filling memory.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04 20:36:19 +02:00
Jens Axboe 61f0c1dcaa cfq-iosched: use assigned slice sync value, not default
We should use the sysfs modified slice sync value, in case it differs
from the default.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 19:46:03 +02:00
Jens Axboe 963b72fc66 cfq-iosched: rename 'desktop' sysfs entry to 'low_latency'
Don't think that's necessarily a perfect description of what this
option fiddles with, but it's probably better than 'desktop'.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 19:42:18 +02:00
Jens Axboe 8e29675555 cfq-iosched: implement slower async initiate and queue ramp up
This slowly ramps up the async queue depth based on the time
passed since the sync IO, and doesn't allow async at all until
a sync slice period has passed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 16:27:13 +02:00
Vivek Goyal 365722bb91 cfq-iosched: delay async IO dispatch, if sync IO was just done
o Do not allow more than max_dispatch requests from an async queue, if some
  sync request has finished recently. This is in the hope that sync activity
  is still going on in the system and we might receive a sync request soon.
  Most likely from a sync queue which finished a request and we did not enable
  idling on it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 15:21:27 +02:00
Jens Axboe 1d2235152d cfq-iosched: add a knob for desktop interactiveness
This is basically identical to what Vivek Goyal posted, but combined
into one and labelled 'desktop' instead of 'fairness'. The goal
is to continue to improve on the latency side of things as it relates
to interactiveness, keeping the questionable bits under this sysfs
tunable so it would be easy for throughput-only people to turn off.

Apart from adding the interactive sysfs knob, it also adds the
behavioural change of allowing slice idling even if the hardware
does tagged command queuing.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-02 20:06:02 +02:00
Linus Torvalds ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Jeff Moyer 06d2188644 cfq: choose a new next_req when a request is dispatched
This patch addresses http://bugzilla.kernel.org/show_bug.cgi?id=13401, a
regression introduced in 2.6.30.

From the bug report:

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Shan Wei b217a903ab cfq: fix the log message after dispatched a request
The blktrace tools can show process id when cfq dispatched a request,
using cfq_log_cfqq() instead of cfq_log().

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:34:33 +02:00
Jens Axboe 1b379d8daf cfq-iosched: get rid of must_alloc flag
It's not currently used, as pointed out by
Gui Jianfeng <guijianfeng@cn.fujitsu.com>. We already check the
wait_request flag to allow an idling queue priority allocation access,
so we don't need this extra flag.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:32 +02:00
Jens Axboe 1f98a13f62 bio: first step in sanitizing the bio->bi_rw flag testing
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:31 +02:00
Vivek Goyal d58b85e1e8 cfq-iosched: no need to keep track of busy_rt_queues
o Get rid of busy_rt_queues infrastructure. Looks like it is redundant.

o Once an RT queue gets request it will preempt any of the BE or IDLE queues
  immediately. Otherwise this queue will be put on service tree and scheduler
  will anyway select this queue before any of the BE or IDLE queue. Hence
  looks like there is no need to keep track of how many busy RT queues are
  currently on service tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:30 +02:00
Jens Axboe 5ad531db6e cfq-iosched: drain device queue before switching to a sync queue
To lessen the impact of async IO on sync IO, let the device drain of
any async IO in progress when switching to a sync cfqq that has idling
enabled.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:30 +02:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Vivek Goyal 32f2e807a3 cfq-iosched: reset oom_cfqq in cfq_set_request()
In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.

Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.

Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:54 +02:00
Tejun Heo c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Shan Wei b706f64281 cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request()
With the changes for falling back to an oom_cfqq, we never fail
to find/allocate a queue in cfq_get_queue(). So remove the check.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 12:41:14 +02:00
Jens Axboe 6118b70b3a cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue()
Setup an emergency fallback cfqq that we allocate at IO scheduler init
time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just
punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue()
never fails without having to ensure free memory.

On cfqq lookup, always try to allocate a new cfqq if the given cfq io
context has the oom_cfqq assigned. This ensures that we only temporarily
punt to this shared queue.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
Jens Axboe d5036d770f cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue()
We're going to be needing that init code outside of that function
to get rid of the __GFP_NOFAIL in cfqq allocation.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
Tejun Heo 245b2e70ea percpu: clean up percpu variable definitions
Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
2009-06-24 15:13:48 +09:00
Jeff Moyer 6923715ae3 cfq: remove extraneous '\n' in blktrace output
I noticed a blank line in blktrace output.  This patch fixes that.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:04 +02:00
Gui Jianfeng 81be834713 cfq: cleanup for last_end_request in cfq_data
Actually, last_end_request in cfq_data isn't used now. So lets
just remove it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Nikanth Karthikesan d9c7d394a8 block: prevent possible io_context->refcount overflow
Currently io_context has an atomic_t(32-bit) as refcount.  In the case of
cfq, for each device against whcih a task does I/O, a reference to the
io_context would be taken.  And when there are multiple process sharing
io_contexts(CLONE_IO) would also have a reference to the same io_context.

Theoretically the possible maximum number of processes sharing the same
io_context + the number of disks/cfq_data referring to the same io_context
can overflow the 32-bit counter on a very high-end machine.

Even though it is an improbable case, let us make it atomic_long_t.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 23:07:15 +02:00
Tejun Heo 2e46e8b27a block: drop request->hard_* and *nr_sectors
struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo 83096ebf12 block: convert to pos and nr_sectors accessors
With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo 5b93629b45 block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Tejun Heo a7f5579234 block: kill blk_start_queueing()
blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Jens Axboe f2d1f0ae78 cfq-iosched: cache prio_tree root in cfqq->p_root
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe 3ac6c9f8a6 cfq-iosched: fix bug with aliased request and cooperation detection
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.

cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe 26a2ac009c cfq-iosched: clear ->prio_trees[] on cfqd alloc
Not strictly needed, but we should make it clear that we init the
rbtree roots here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jeff Moyer 04dc6e71a2 cfq-iosched: use the default seek distance when there aren't enough seek samples
If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jeff Moyer 4d00aa47e2 cfq-iosched: make seek_mean converge more quickly
Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jens Axboe a36e71f996 cfq-iosched: add close cooperator code
If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.

The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.

This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.

Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:15:11 +02:00
Jens Axboe 9481ffdc61 cfq-iosched: log responsible 'cfqq' in idle timer arm
Makes it easier to read the traces.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:14:13 +02:00
Jens Axboe 2d87072296 cfq-iosched: tweak kick logic a bit more
We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:12:46 +02:00
Jens Axboe 40bb54d197 cfq-iosched: no need to save interrupts in cfq_kick_queue()
It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:11:10 +02:00
Jens Axboe d6ceb25e8d cfq-iosched: don't delay queue kick for a merged request
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit
b029195dda introduced a regression
of about 50% with sequential threaded read workloads. The test
case is:

tiotest -k0 -k1 -k3 -f 80 -t 32

which starts 32 threads each reading a 80MB file. Twiddle the kick
queue logic so that we do start IO immediately, if it appears to be
a fully merged request. We can't really detect that, so just check
if the request is bigger than a page or not. The assumption is that
since single bio issues will first queue a single request with just
one page attached and then later do merges on that, if we already
have more than a page worth of data in the request, then the request
is most likely good to go.

Verified that this doesn't cause a regression with the test case that
commit b029195dda was fixing. It does not,
we still see maximum sized requests for the queue-then-merge cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:12 +02:00
Jens Axboe ff6657c6c8 cfq-iosched: get rid of private SYNC/ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe b0b78f81a5 cfq-iosched: use rw_is_sync() to see if rw flags are sync or not
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe b029195dda cfq-iosched: don't let idling interfere with plugging
When CFQ is waiting for a new request from a process, currently it'll
immediately restart queuing when it sees such a request. This doesn't
work very well with streamed IO, since we then end up splitting IO
that would otherwise have been merged nicely. For a simple dd test,
this causes 10x as many requests to be issued as we should have.
Normally this goes unnoticed due to the low overhead of requests
at the device side, but some hardware is very sensitive to request
sizes and there it can cause big slow downs.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 11:38:31 +02:00
Jens Axboe 75e50984f0 cfq-iosched: kill two unused cfqq flags
We only manipulate the must_dispatch and queue_new flags, they are not
tested anymore. So get rid of them.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:56:14 +02:00
Jens Axboe 2f5cb7381b cfq-iosched: change dispatch logic to deal with single requests at the time
The IO scheduler core calls into the IO scheduler dispatch_request hook
to move requests from the IO scheduler and into the driver dispatch
list. It only does so when the dispatch list is empty. CFQ moves several
requests to the dispatch list, which can cause higher latencies if we
suddenly have to switch to some important sync IO. Change the logic to
move one request at the time instead.

This should almost be functionally equivalent to what we did before,
except that we now honor 'quantum' as the maximum queue depth at the
device side from any single cfqq. If there's just a single active
cfqq, we allow up to 4 times the normal quantum.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:51:19 +02:00
Jens Axboe aeb6fafb8f block: Add flag for telling the IO schedulers NOT to anticipate more IO
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Divyesh Shah 3a9a3f6cc5 cfq-iosched: Allow RT requests to pre-empt ongoing BE timeslice
This patch adds the ability to pre-empt an ongoing BE timeslice when a RT
request is waiting for the current timeslice to complete. This reduces the
wait time to disk for RT requests from an upper bound of 4 (current value
of cfq_quantum) to 1 disk request.

Applied Jens' suggeested changes to avoid the rb lookup and use !cfq_class_rt()
and retested.

Latency(secs) for the RT task when doing sequential reads from 10G file.
                       | only RT | RT + BE | RT + BE + this patch
small (512 byte) reads | 143     | 163     | 145
large (1Mb) reads      | 142     | 158     | 146

Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:47:33 +01:00
Jens Axboe 62c1fe9d9f cfq-iosched: fix race between exiting queue and exiting task
Original patch from Nikanth Karthikesan <knikanth@suse.de>

When a queue exits the queue lock is taken and cfq_exit_queue() would free all
the cic's associated with the queue.

But when a task exits, cfq_exit_io_context() gets cic one by one and then
locks the associated queue to call __cfq_exit_single_io_context. It looks like
between getting a cic from the ioc and locking the queue, the queue might have
exited on another cpu.

Fix this by rechecking the cfq_io_context queue key inside the queue lock
again, and not calling into __cfq_exit_single_io_context() if somebody
beat us to it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:52 +01:00
Jens Axboe 30e0dc28bf cfq-iosched: remove limit of dispatch depth of max 4 times quantum
This basically limits the hardware queue depth to 4*quantum at any
point in time, which is 16 with the default settings. As CFQ uses
other means to shrink the hardware queue when necessary in the first
place, there's really no need for this extra heuristic. Additionally,
it ends up hurting performance in some cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Jens Axboe b374d18a4b block: get rid of elevator_t typedef
Just use struct elevator_queue everywhere instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:50 +01:00
Cheng Renquan 64d01dc9e1 block: use cancel_work_sync() instead of kblockd_flush_work()
After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Jens Axboe f7d7b7a7a3 block: as/cfq ssd idle check update
We really need to know about the hardware tagging support as well,
since if the SSD does not do tagging then we still want to idle.
Otherwise have the same dependent sync IO vs flooding async IO
problem as on rotational media.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Jens Axboe a68bbddba4 block: add queue flag for SSD/non-rotational devices
We don't want to idle in AS/CFQ if the device doesn't have a seek
penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational
device, low level drivers should set this flag upon discovery of
an SSD or similar device type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Aaron Carroll 45333d5a31 cfq-iosched: fix queue depth detection
CFQ's detection of queueing devices assumes a non-queuing device and detects
if the queue depth reaches a certain threshold.  Under some workloads (e.g.
synchronous reads), CFQ effectively forces a unit queue depth, thus defeating
the detection logic.  This leads to poor performance on queuing hardware,
since the idle window remains enabled.

This patch inverts the sense of the logic: assume a queuing-capable device,
and detect if the depth does not exceed the threshold.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe 18887ad910 block: make kblockd_schedule_work() take the queue as parameter
Preparatory patch for checking queuing affinity.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe c265a7f417 cfq-iosched: get rid of enable_idle being unused warning
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:14 +02:00
Jens Axboe 7b679138b3 cfq-iosched: add message logging through blktrace
Now that blktrace has the ability to carry arbitrary messages in
its stream, use that for some CFQ logging.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:12 +02:00
Jens Axboe 9a11b4ed0e cfq-iosched: properly protect ioc_gone and ioc count
If we have multiple tasks freeing cfq_io_contexts when cfq-iosched
is being unloaded, we could complete() ioc_gone twice. Fix that by
protecting ioc_gone complete() and clearing with a spinlock for
just that purpose. Doesn't matter from a performance perspective,
since it'll only enter that path when ioc_gone != NULL (when cfq-iosched
is being rmmod'ed).

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:12 +02:00
Jens Axboe d6de8be711 cfq-iosched: fix RCU problem in cfq_cic_lookup()
cfq_cic_lookup() needs to properly protect ioc->ioc_data before
dereferencing it and also exclude updaters of ioc->ioc_data as well.

Also add a number of comments documenting why the existing RCU usage
is OK.

Thanks a lot to "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> for
review and comments!

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-28 14:49:28 +02:00
Richard Kennedy be754d2c21 block: reorder cfq_queue to save space on 64bit builds
saves 8 bytes of padding & increases objects/slab from 30 to 32 on my
AMD64 config

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-28 14:49:27 +02:00
Jens Axboe 6d63c27557 cfq-iosched: make io priorities inherit CPU scheduling class as well as nice
We currently set all processes to the best-effort scheduling class,
regardless of what CPU scheduling class they belong to. Improve that
so that we correctly track idle and rt scheduling classes as well.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-07 09:51:23 +02:00
Jens Axboe 07416d29bc cfq-iosched: fix RCU race in the cfq io_context destructor handling
put_io_context() drops the RCU read lock before calling into cfq_dtor(),
however we need to hold off freeing there before grabbing and
dereferencing the first object on the list.

So extend the rcu_read_lock() scope to cover the calling of cfq_dtor(),
and optimize cfq_free_io_context() to use a new variant for
call_for_each_cic() that assumes the RCU read lock is already held.

Hit in the wild by Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-07 09:28:57 +02:00
Fabio Checconi 4faa3c8150 cfq-iosched: do not leak ioc_data across iosched switches
When switching scheduler from cfq, cfq_exit_queue() does not clear
ioc->ioc_data, leaving a dangling pointer that can deceive the following
lookups when the iosched is switched back to cfq.  The pattern that can
trigger that is the following:

    - elevator switch from cfq to something else;
    - module unloading, with elv_unregister() that calls cfq_free_io_context()
      on ioc freeing the cic (via the .trim op);
    - module gets reloaded and the elevator switches back to cfq;
    - reallocation of a cic at the same address as before (with a valid key).

To fix it just assign NULL to ioc_data in __cfq_exit_single_io_context(),
that is called from the regular exit path and from the elevator switching
code.  The only path that frees a cic and is not covered is the error handling
one, but cic's freed in this way are never cached in ioc_data.

Signed-off-by: Fabio Checconi <fabio@gandalf.sssup.it>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-10 08:28:01 +02:00
Fabio Checconi 34e6bbf23c cfq-iosched: fix rcu freeing of cfq io contexts
SLAB_DESTROY_BY_RCU is not a direct substitute for normal call_rcu()
freeing, since it'll page freeing but NOT object freeing. So change
cfq to do the freeing on its own.

Signed-off-by: Fabio Checconi <fabio@gandalf.sssup.it>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-02 15:42:20 +02:00
Jens Axboe ffc4e75957 cfq-iosched: add hlist for browsing parallel to the radix tree
It's cumbersome to browse a radix tree from start to finish, especially
since we modify keys when a process exits. So add a hlist for the single
purpose of browsing over all known cfq_io_contexts, used for exit,
io prio change, etc.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=9948

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 10:04:00 +01:00
Jens Axboe fe094d98e7 cfq-iosched: make checkpatch compliant
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01 09:26:33 +01:00
Jens Axboe febffd6181 cfq-iosched: kill some big inlines
Use of inlines were a bit over the top, trim them down a bit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 13:19:43 +01:00
Jens Axboe 0871714e08 cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
Currently you must be root to set idle io prio class on a process. This
is due to the fact that the idle class is implemented as a true idle
class, meaning that it will not make progress if someone else is
requesting disk access. Unfortunately this means that it opens DOS
opportunities by locking down file system resources, hence it is root
only at the moment.

This patch relaxes the idle class a little, by removing the truly idle
part (which entals a grace period with associated timer). The
modifications make the idle class as close to zero impact as can be done
while still guarenteeing progress. This means we can relax the root only
criteria as well.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 11:38:15 +01:00
Jens Axboe 4ac845a2e9 block: cfq: make the io contect sharing lockless
The io context sharing introduced a per-ioc spinlock, that would protect
the cfq io context lookup. That is a regression from the original, since
we never needed any locking there because the ioc/cic were process private.

The cic lookup is changed from an rbtree construct to a radix tree, which
we can then use RCU to make the reader side lockless. That is the performance
critical path, modifying the radix tree is only done on process creation
(when that process first does IO, actually) and on process exit (if that
process has done IO).

As it so happens, radix trees are also much faster for this type of
lookup where the key is a pointer. It's a very sparse tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:33 +01:00
Nikanth Karthikesan 66dac98ed0 io_context sharing - cfq changes
changes in the cfq for io_context sharing

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:32 +01:00
Jens Axboe fd0928df98 ioprio: move io priority from task_struct to io_context
This is where it belongs and then it doesn't take up space for a
process that doesn't do IO.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:29 +01:00
Adrian Bunk 2fdd82bd88 block: let elv_register() return void
elv_register() always returns 0, and there isn't anything it does where
it should return an error (the only error condition is so grave that
it's handled with a BUG_ON).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-18 08:29:28 +01:00
Oleg Nesterov 0e7be9edb9 cfq_idle_class_timer: add paranoid checks for jiffies overflow
In theory, if the queue was idle long enough, cfq_idle_class_timer may have
a false (and very long) timeout because jiffies can wrap into the past wrt
->last_end_request.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07 13:51:35 +01:00
Oleg Nesterov b70c864d3c cfq: fix IOPRIO_CLASS_IDLE delays
After the fresh boot:

	ionice -c3 -p $$
	echo cfq >> /sys/block/XXX/queue/scheduler
	dd if=/dev/XXX of=/dev/null bs=512 count=1

Now dd hangs in D state and the queue is completely stalled for approximately
INITIAL_JIFFIES + CFQ_IDLE_GRACE jiffies. This is because cfq_init_queue()
forgets to initialize cfq_data->last_end_request.

(I guess this patch is not complete, overflow is still possible)

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07 09:46:13 +01:00
Oleg Nesterov 2389d1ef17 cfq: fix IOPRIO_CLASS_IDLE accounting
Spotted by Nick <gentuu@gmail.com>, hopefully can explain the second trace in
http://bugzilla.kernel.org/show_bug.cgi?id=9180.

If ->async_idle_cfqq != NULL cfq_put_async_queues() puts it IOPRIO_BE_NR times
in a loop. Fix this.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07 09:45:00 +01:00
Oleg Nesterov 0a0836a09c cfq_get_queue: fix possible NULL pointer access
cfq_get_queue()->cfq_find_alloc_queue() can fail, check the returned value.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>

Note that this isn't a bug at the moment, since the regular IO path
does not call this path without __GFP_WAIT set. However, it could be a
future bug, so I've applied it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29 11:33:05 +01:00
Oleg Nesterov 4310864b9d cfq_exit_queue() should cancel cfq_data->unplug_work
Spotted by Nick <gentuu@gmail.com>, perhaps explains the first trace in
http://bugzilla.kernel.org/show_bug.cgi?id=9180.

cfq_exit_queue() should cancel cfqd->unplug_work before freeing cfqd.
blk_sync_queue() seems unneeded, removed.

Q: why cfq_exit_queue() calls cfq_shutdown_timer_wq() twice?

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29 11:33:05 +01:00
Jens Axboe 165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Alexey Dobriyan 8350163a90 cfq: Write-only stuff in CFQ data structures
There are some leftover bits from the task cooperator patch, that was
yanked out again. While it will get reintroduced, no point in having
this write-only stuff in the tree. So yank it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20 10:07:50 +02:00
Vasily Tarasov c2dea2d1fd cfq: async queue allocation per priority
If we have two processes with different ioprio_class, but the same
ioprio_data, their async requests will fall into the same queue. I guess
such behavior is not expected, because it's not right to put real-time
requests and best-effort requests in the same queue.

The attached patch fixes the problem by introducing additional *cfqq
fields on cfqd, pointing to per-(class,priority) async queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20 10:06:38 +02:00
Christoph Lameter 94f6030ca7 Slab allocators: Replace explicit zeroing with __GFP_ZERO
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing
variant in the past.  But with __GFP_ZERO it is possible now to do zeroing
while allocating.

Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever
we can.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Jens Axboe 15c31be4d5 cfq-iosched: fix async queue behaviour
With the cfq_queue hash removal, we inadvertently got rid of the
async queue sharing. This was not intentional, in fact CFQ purposely
shares the async queue per priority level to get good merging for
async writes.

So put some logic in cfq_get_queue() to track the shared queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 13:43:25 +02:00
Christoph Lameter 0a31bd5f2b KMEM_CACHE(): simplify slab cache creation
This patch provides a new macro

KMEM_CACHE(<struct>, <flags>)

to simplify slab creation. KMEM_CACHE creates a slab with the name of the
struct, with the size of the struct and with the alignment of the struct.
Additional slab flags may be specified if necessary.

Example

struct test_slab {
	int a,b,c;
	struct list_head;
} __cacheline_aligned_in_smp;

test_slab_cache = KMEM_CACHE(test_slab, SLAB_PANIC)

will create a new slab named "test_slab" of the size sizeof(struct
test_slab) and aligned to the alignment of test slab.  If it fails then we
panic.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:55 -07:00
Jens Axboe 597bc485d6 cfq-iosched: speedup cic rb lookup
We often lookup the same queue many times in succession, so cache
the last looked up queue to avoid browsing the rbtree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Vasily Tarasov 91fac317a3 cfq-iosched: get rid of cfqq hash
cfq hash is no more necessary.  We always can get cfqq from io context.
cfq_get_io_context_noalloc() function is introduced, because we don't
want to allocate cic on merging and checking may_queue.  In order to
identify sync queue we've used hash key = CFQ_KEY_ASYNC. Since hash is
eliminated we need to use other criterion: sync flag for queue is added.
In all places where we dig in rb_tree we're in current context, so no
additional locking is required.

Advantages of this patch: no additional memory for hash, no seeking in
hash, code is cleaner. But it is necessary now to seek cic in per-ioc
rbtree, but it is faster:
- most processes work only with few devices
- most systems have only few block devices
- it is a rb-tree

Signed-off-by: Vasily Tarasov <vtaras@openvz.org>

Changes by me:

- Merge into CFQ devel branch
- Get rid of cfq_get_io_context_noalloc()
- Fix various bugs with dereferencing cic->cfqq[] with offset other
  than 0 or 1.
- Fix bug in cfqq setup, is_sync condition was reversed.
- Fix bug where only bio_sync() is used, we need to check for a READ too

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe cc19747977 cfq-iosched: tighten queue request overlap condition
For tagged devices, allow overlap of requests if the idle window
isn't enabled on the current active queue.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe 3ed9a2965c cfq-iosched: improve sync vs async workloads
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe 1be92f2fc7 cfq-iosched: never allow an async queue idling
We don't enable it by default, don't let it get enabled during
runtime.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 20e493a8d0 cfq-iosched: get rid of ->dispatch_slice
We can track it fairly accurately locally, let the slice handling
take care of the rest.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 6084cdda0e cfq-iosched: don't pass unused preemption variable around
We don't use it anymore in the slice expiry handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe edd75ffd92 cfq-iosched: get rid of ->cur_rr and ->cfq_list
It's only used for preemption now that the IDLE and RT queues also
use the rbtree. If we pass an 'add_front' variable to
cfq_service_tree_add(), we can set ->rb_key to 0 to force insertion
at the front of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 67e6b49e39 cfq-iosched: slice offset should take ioprio into account
Use the max_slice-cur_slice as the multipler for the insertion offset.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 498d3aa2b4 [PATCH] cfq-iosched: style cleanups and comments
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 67060e3799 cfq-iosched: sort IDLE queues into the rbtree
Same treatment as the RT conversion, just put the sorted idle
branch at the end of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe 0c534e0a46 cfq-iosched: sort RT queues into the rbtree
Currently CFQ does a linked insert into the current list for RT
queues. We can just factor the class into the rb insertion,
and then we don't have to treat RT queues in a special way. It's
faster, too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe cc09e2990f [PATCH] cfq-iosched: speed up rbtree handling
For cases where the rbtree is mainly used for sorting and min retrieval,
a nice speedup of the rbtree code is to maintain a cache of the leftmost
node in the tree.

Also spotted in the CFS CPU scheduler code.

Improved by Alan D. Brunelle <Alan.Brunelle@hp.com> by updating the
leftmost hint in cfq_rb_first() if it isn't set, instead of only
updating it on insert.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe d9e7620e60 cfq-iosched: rework the whole round-robin list concept
Drawing on some inspiration from the CFS CPU scheduler design, overhaul
the pending cfq_queue concept list management. Currently CFQ uses a
doubly linked list per priority level for sorting and service uses.
Kill those lists and maintain an rbtree of cfq_queue's, sorted by when
to service them.

This unfortunately means that the ionice levels aren't as strong
anymore, will work on improving those later. We only scale the slice
time now, not the number of times we service. This means that latency
is better (for all priority levels), but that the distinction between
the highest and lower levels aren't as big.

The diffstat speaks for itself.

 cfq-iosched.c |  363 +++++++++++++++++---------------------------------
 1 file changed, 125 insertions(+), 238 deletions(-)

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe 1afba0451c cfq-iosched: minor updates
- Move the queue_new flag clear to when the queue is selected
- Only select the non-first queue in cfq_get_best_queue(), if there's
  a substantial difference between the best and first.
- Get rid of ->busy_rr
- Only select a close cooperator, if the current queue is known to take
  a while to "think".

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe 6d048f5310 cfq-iosched: development update
- Implement logic for detecting cooperating processes, so we
  choose the best available queue whenever possible.

- Improve residual slice time accounting.

- Remove dead code: we no longer see async requests coming in on
  sync queues. That part was removed a long time ago. That means
  that we can also remove the difference between cfq_cfqq_sync()
  and cfq_cfqq_class_sync(), they are now indentical. And we can
  kill the on_dispatch array, just make it a counter.

- Allow a process to go into the current list, if it hasn't been
  serviced in this scheduler tick yet.

Possible future improvements including caching the cfqq lookup
in cfq_close_cooperator(), so we don't have to look it up twice.
cfq_get_best_queue() should just use that last decision instead
of doing it again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe 1e3335de05 cfq-iosched: improve preemption for cooperating tasks
When testing the syslet async io approach, I discovered that CFQ
sometimes didn't perform as well as expected. cfq_should_preempt()
needs to better check for cooperating tasks, so fix that by allowing
preemption of an equal priority queue if the recently queued request
is as good a candidate for IO as the one we are currently waiting for.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe 5044eed488 cfq-iosched: fix alias + front merge bug
There's a really rare and obscure bug in CFQ, that causes a crash in
cfq_dispatch_insert() due to rq == NULL.  One example of the resulting
oops is seen here:

	http://lkml.org/lkml/2007/4/15/41

Neil correctly diagnosed the situation for how this can happen: if two
concurrent requests with the exact same sector number (due to direct IO
or aliasing between MD and the raw device access), the alias handling
will add the request to the sortlist, but next_rq remains NULL.

Read the more complete analysis at:

	http://lkml.org/lkml/2007/4/25/57

This looks like it requires md to trigger, even though it should
potentially be possible to due with O_DIRECT (at least if you edit the
kernel and doctor some of the unplug calls).

The fix is to move the ->next_rq update to when we add a request to the
rbtree. Then we remove the possibility for a request to exist in the
rbtree code, but not have ->next_rq correctly updated.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-25 08:41:48 -07:00
Jens Axboe a993800655 cfq-iosched: fix sequential write regression
We have a 10-15% performance regression for sequential writes on TCQ/NCQ
enabled drives in 2.6.21-rcX after the CFQ update went in.  It has been
reported by Valerie Clement <valerie.clement@bull.net> and the Intel
testing folks.  The regression is because of CFQ's now more aggressive
queue control, limiting the depth available to the device.

This patches fixes that regression by allowing a greater depth when only
one queue is busy.  It has been tested to not impact sync-vs-async
workloads too much - we still do a lot better than 2.6.20.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-20 22:56:29 -07:00
Jens Axboe 9ede209e83 cfq-iosched: improve continue or break logic in cfq_dispatch
This improves performance considerably for sync requests when you
have command queuing enabled.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe 28f95cbc3e cfq-iosched: remove the implicit queue kicking in slice expire
We only really need it for a process going away, so move it to
those locations.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe 3c6bd2f879 cfq-iosched: check whether a queue timed out in accounting
Makes it more fair for the residual slice count.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe cb8874119e cfq-iosched: tweak the FIFO checking
We currently check the FIFO once per slice. Optimize that a bit and
only do it as the first thing for a new slice, so we don't end up
doing a single request and then seek to the FIFO requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe 1792669cc1 cfq-iosched: don't pass in queue for cfq_arm_slice_timer()
It must always be the active queue, otherwise it's a bug. So just
use the active_queue, don't pass it in explicitly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe c5b680f3b7 cfq-iosched: account for slice over/under time
If a slice uses less than it is entitled to (or perhaps more), include
that in the decision on how much time to give it the next time it
gets serviced.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe 44f7c16065 cfq-iosched: defer slice activation to first request being active
This better matches what time the queue is actually spending doing
IO.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe 99f9628aba [PATCH] cfq-iosched: use last service point as the fairness criteria
Right now we use slice_start, which gives async queues an unfair
advantage. Chance that to service_last, and base the resorter
on that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:45 +01:00
Jens Axboe b0b8d74941 cfq-iosched: document the cfqq flags
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:44 +01:00
Jens Axboe 98e41c7dfc [PATCH] cfq-iosched: move on_rr check into cfq_resort_rr_list()
Move the on_rr check into cfq_resort_rr_list(), every call site
needs to check it anyway.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:44 +01:00
Jens Axboe aaf1228ddf cfq-iosched: remove cfq_io_context last_queue
It hasn't been used for a while, kill it off and remove the old
if 0 code chunk.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-11 23:14:44 +01:00
Jens Axboe ec8acb6904 [PATCH] cfq-iosched: merging problem
Two issues:

- The final return 1 should be a return 0, otherwise comparing cfqq is
  a noop.

- bio_sync() only checks the sync flag, while rq_is_sync() checks both
  for READ and sync. The latter is what we want. Expand the bio check
  to include reads, and relax the restriction to allow merging of async
  io into sync requests.

In the future we want to clean up the SYNC logic, right now it means
both sync request (such as READ and O_DIRECT WRITE) and unplug-on-issue.
Leave that for later.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02 09:46:16 -08:00
Jens Axboe 719d34027e [PATCH] cfq-iosched: tighten allow merge criteria
The logic in cfq_allow_merge() wasn't clear enough - basically allow
merging for the same queues only.  Do a fast check for 'rq and bio both
sync/async' before doing the cfqq hash lookup.

This is verified to work with the fixed elv_try_merge() from commit
bb4067e341.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 14:13:08 -08:00
Jens Axboe da77526502 [PATCH] cfq-iosched: don't allow sync merges across queues
Currently we allow any merge, even if the io originates from different
processes. This can cause really bad starvation and unfairness, if those
ios happen to be synchronous (reads or direct writes).

So add a allow_merge hook to the io scheduler ops, so an io scheduler can
help decide whether a bio/process combination may be merged with an
existing request.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-20 11:04:12 +01:00
Jens Axboe 7749a8d423 [PATCH] Propagate down request sync flag
We need to do this, otherwise the io schedulers don't get access to the
sync flag. Then they cannot tell the difference between a regular write
and an O_DIRECT write, which can cause a performance loss.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13 13:02:26 +01:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Jens Axboe bb37b94c68 [BLOCK] Cleanup unused variable passing
- ->init_queue() does not need the elevator passed in
- ->put_request() is a hot path and need not have the queue passed in
- cfq_update_io_seektime() does not need cfqd passed in

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-01 10:42:33 +01:00
David Howells 65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Jens Axboe 5fccbf61be [PATCH] CFQ: request <-> request merging rr_list fixup
In very rare circumstances would we be pruning a merged request and at
the same time delete the implicated cfqq from the rr_list, and not readd
it when the merged request got added. This could cause io stalls until
that process issued io again.

Fix it up by putting the rr_list add handling into cfq_add_rq_rb(),
identical to how pruning is handled in cfq_del_rq_rb(). This fixes a
hang reproducible with fsx-linux.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-31 08:12:45 -08:00
Jens Axboe c1b707d253 [PATCH] CFQ: bad locking in changed_ioprio()
When the ioprio code recently got juggled a bit, a bug was introduced.
changed_ioprio() is no longer called with interrupts disabled, so using
plain spin_lock() on the queue_lock is a bug.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-30 11:01:50 -08:00
Jens Axboe 0261d6886e [PATCH] CFQ: use irq safe locking in cfq_cic_link()
If cfq_set_request() is called for a new process AND a non-fs io
request (so that __GFP_WAIT may not be set), cfq_cic_link() may
use spin_lock_irq() and spin_unlock_irq() with interrupts already
disabled.

Fix is to always use irq safe locking in cfq_cic_link()

Acked-By: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-30 10:21:58 -08:00
Peter Zijlstra 6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Jens Axboe 0fe2347957 [PATCH] Update axboe@suse.de email address
As people often look for the copyright in files to see who to mail,
update the link to a neutral one.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:34 +02:00
Jens Axboe 374f84ac39 [PATCH] cfq-iosched: use metadata read flag
Give meta data reads preference over regular reads, as the process
often needs to get that out of the way to do the io it was actually
interested in.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:43 +02:00
Jens Axboe bf57225670 [PATCH] cfq-iosched: improve queue preemption
Don't touch the current queues, just make sure that the wanted queue
is selected next. Simplifies the logic.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:41 +02:00
Jens Axboe dc72ef4ae3 [PATCH] Add blk_start_queueing() helper
CFQ implements this on its own now, but it's really block layer
knowledge. Tells a device queue to start dispatching requests to
the driver, taking care to unplug if needed. Also fixes the issue
where as/cfq will invoke a stopped queue, which we really don't
want.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:40 +02:00
Jens Axboe 981a79730d [PATCH] cfq-iosched: kill the empty_list
No point in having a place holder list just for empty queues, so remove
it. It's not used for anything other than to keep ->cfq_list busy.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:40 +02:00
Jens Axboe 53b03744e5 [PATCH] cfq-iosched: Kill O(N) runtime of cfq_resort_rr_list()
Currently it scales with number of processes in that priority group,
which is potentially not very nice as it's called quite often.
Basically we always need to do tail inserts, except for the case of a
new process. So just mark/detect a queue as such.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:39 +02:00
Jens Axboe b5deef9012 [PATCH] Make sure all block/io scheduler setups are node aware
Some were kmalloc_node(), some were still kmalloc(). Change them all to
kmalloc_node().

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:39 +02:00
Jens Axboe 1ea25ecb72 [PATCH] Audit block layer inlines
Kill a few inlines that bring in too much code to more than one location
Shrinks kernel text by about 300 bytes on 32-bit x86.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:38 +02:00
Jens Axboe 4050cf1674 [PATCH] cfq-iosched: use new io context counting mechanism
It's ok if the read path is a lot more costly, as long as inc/dec is
really cheap. The inc/dec will happen for each created/freed io context,
while the reading only happens when a disk queue exits.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:37 +02:00
Jens Axboe fc46379daf [PATCH] cfq-iosched: kill cfq_exit_lock
cfq_exit_lock is protecting two things now:

- The per-ioc rbtree of cfq_io_contexts

- The per-cfqd linked list of cfq_io_contexts

The per-cfqd linked list can be protected by the queue lock, as it is (by
definition) per cfqd as the queue lock is.

The per-ioc rbtree is mainly used and updated by the process itself only.
The only outside use is the io priority changing. If we move the
priority changing to not browsing the rbtree, we can remove any locking
from the rbtree updates and lookup completely. Let the sys_ioprio syscall
just mark processes as having the iopriority changed and lazily update
the private cfq io contexts the next time io is queued, and we can
remove this locking as well.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:36 +02:00
Jens Axboe 89850f7ee9 [PATCH] cfq-iosched: cleanups, fixes, dead code removal
A collection of little fixes and cleanups:

- We don't use the 'queued' sysfs exported attribute, since the
  may_queue() logic was rewritten. So kill it.

- Remove dead defines.

- cfq_set_active_queue() can be rewritten cleaner with else if conditions.

- Several places had cfq_exit_cfqq() like logic, abstract that out and
  use that.

- Annotate the cfqq kmem_cache_alloc() so the allocator knows that this
  is a repeat allocation if it fails with __GFP_WAIT set. Allows the
  allocator to start freeing some memory, if needed. CFQ already loops for
  this condition, so might as well pass the hint down.

- Remove cfqd->rq_starved logic. It's not needed anymore after we dropped
  the crq allocation in cfq_set_request().

- Remove uneeded parameter passing.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:35 +02:00
Jens Axboe cb78b285c8 [PATCH] Drop useless bio passing in may_queue/set_request API
It's not needed for anything, so kill the bio passing.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:23 +02:00
Jens Axboe 5e70537479 [PATCH] cfq-iosched: kill crq
Get rid of the cfq_rq request type. With the added elevator_private2, we
have enough room in struct request to get rid of any crq allocation/free
for each request.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:27:02 +02:00
Jens Axboe 5380a101d3 [PATCH] cfq-iosched: remove the crq flag functions/variable
There's just one flag currently (SYNC), and that one can be grabbed from
the request.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:27:01 +02:00
Jens Axboe 95e8810b28 [PATCH] cfq-iosched: convert to using the FIFO elevator defines
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:26:59 +02:00
Jens Axboe 21183b07ee [PATCH] cfq-iosched: migrate to using the elevator rb functions
This removes the rbtree handling from CFQ.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:26:58 +02:00
Jens Axboe 9817064b68 [PATCH] elevator: move the backmerging logic into the elevator core
Right now, every IO scheduler implements its own backmerging (except for
noop, which does no merging). That results in duplicated code for
essentially the same operation, which is never a good thing. This patch
moves the backmerging out of the io schedulers and into the elevator
core. We save 1.6kb of text and as a bonus get backmerging for noop as
well. Win-win!

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:26:56 +02:00
Oleg Nesterov be33c3a67b [PATCH] cfq_cic_link: fix usage of wrong cfq_io_context
Obviously, cfq_cic_link() shouldn't free a just allocated cfq_io_context?
The dead key is from __cic, so drop that.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-08-21 10:02:54 +02:00
Jens Axboe 44eb123126 [PATCH] cfq-iosched: don't use a hard jiffies value, translate from msecs
The CIC_SEEKY() test really wants to use the minimum of either:

- 2 msecs (not jiffies)

- or, the pending slice time

So code it like that.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-25 15:05:21 +02:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Jens Axboe dd67d05152 [PATCH] rbtree: support functions used by the io schedulers
They all duplicate macros to check for empty root and/or node, and
clearing a node. So put those in rbtree.h.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe fd61af0384 [PATCH] cfq-iosched: rq update fixes
- Remember to set ->last_sector so that the cfq_choose_req() logic
  works correctly.

- Remove redundant call to cfq_choose_req()

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe caaa5f9f0a [PATCH] cfq-iosched: many performance fixes
This is a collection of patches that greatly improve CFQ performance
in some circumstances.

- Change the idling logic to only kick in after a request is done and we
  are deciding what to do. Before the idling included the request service
  time, so it was hard to adjust. Now it's true think/idle time.

- Take advantage of TCQ/NCQ/queueing for seeky sync workloads, but keep
  it in control for sync and sequential (or close to) workloads.

- Expire queues immediately and move on to other busy queues, if we are
  not going to idle after the current one finishes.

- Don't rearm idle timer if there are no busy queues. Just leave the
  system idle.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe 35e6077cb1 [PATCH] cfq-iosched: correctly set ioprio on both targets
Patch originally from Vasily Tarasov <vtaras@sw.ru>

If you set io-priority of process 1 using sys_ioprio_set system call by
another process 2 (like ionice do), then cfq_init_prio_data() function
sets priority of process 2 (current) on queue of process 1 and clears
the flag, that designates change of ioprio.  So the process  1 will work
like with priority of process 2.

I propose not to call cfq_init_prio_data() on io-priority change, but
only mark queue as queue with changed prority.  Every time when new
request comes cfq-scheduler checks for this flag and atomaticaly changes
priority of queue to new value.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe b31dc66a54 [PATCH] Kill PF_SYNCWRITE flag
A process flag to indicate whether we are doing sync io is incredibly
ugly. It also causes performance problems when one does a lot of async
io and then proceeds to sync it. Part of the io will go out as async,
and the other part as sync. This causes a disconnect between the
previously submitted io and the synced io. For io schedulers such as CFQ,
this will cause us lost merges and suboptimal behaviour in scheduling.

Remove PF_SYNCWRITE completely from the fsync/msync paths, and let
the O_DIRECT path just directly indicate that the writes are sync
by using WRITE_SYNC instead.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe 271f18f102 [PATCH] cfq-iosched: Don't set the queue batching limits
We cannot update them if the user changes nr_requests, so don't
set it in the first place. The gains are pretty questionable as
well. The batching loss has been shown to decrease throughput.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:38 +02:00
Linus Torvalds 6b41fd1785 Fix up CFQ scheduler for recent rbtree node shrinkage
The color is now in the low bits of the parent pointer, and initializing
it to 0 happens as part of the whole memset above, so just remove the
unnecessary RB_CLEAR_COLOR.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-20 19:44:03 -07:00
Linus Torvalds 2edc322d42 Merge git://git.infradead.org/~dwmw2/rbtree-2.6
* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node
2006-06-20 14:51:22 -07:00
Jens Axboe 553698f944 [PATCH] cfq-iosched: fix crash in do_div()
We don't clear the seek stat values in cfq_alloc_io_context(), and if
->seek_mean is unlucky enough to be set to -36 by chance, the first
invocation of cfq_update_io_seektime() will oops with a divide by zero
in do_div().

Just memset the entire cic instead of filling invididual values
independently.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-14 10:22:16 -07:00
Jens Axboe bc1c116974 [PATCH] elevator switching race
There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08 15:14:23 -07:00
Jens Axboe b52a834892 [PATCH] cfq-iosched: busy_rr fairness fix
Now that we select busy_rr for possible service, insert entries at the
back of that list instead of at the front.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-01 18:53:43 +02:00
Jens Axboe ae818a38d4 [PATCH] cfq-iosched: fix bug in timer handling for the idle class
There's a small window from when the timer is entered and we grab
the queue lock, where cfq_set_active_queue() could be rearming the
timer for us. Seen in the wild on a 12-way ppc box. Fix this by
just using mod_timer(), which will do the right thing for us.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-01 10:13:43 +02:00
Jens Axboe 25776e3594 [PATCH] cfq-iosched: Detect hardware queueing
If the hardware is doing real queueing, decide that it's worthless to
idle the hardware. It does reasonable simultaneous io in that case
anyways, and the idling hurts some work loads.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-01 10:12:26 +02:00
Jens Axboe 12e9fddd6e [PATCH] cfq-iosched: Detect idle process issuing async request
If we are anticipating a sync request from this process and we are
waiting for that and see an async request come in, expire that slice
and move on.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-01 10:09:56 +02:00
Jens Axboe e0de0206a2 [PATCH] cfq-iosched: check busy queues before deciding we are idle
For just one busy queue (like async write out), we often overlooked
that we could queue more io and decided we were idle instead. This causes
us quite a bit of performance loss.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-01 10:07:26 +02:00
Jens Axboe 3793c65c13 [PATCH] cfq-iosched: fixup locking and ->queue_list list management
- Drop cic from the list when seen as dead.
- Fixup the locking, just use a simple spinlock.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-30 20:31:05 -07:00
David Woodhouse 3db3a44530 [RBTREE] Change rbtree off-tree marking in I/O schedulers.
They were abusing the rb_color field to mark nodes which weren't currently
on the tree. Fix that to use the same method as eventpoll did -- setting
the parent pointer to point back to itself. And use the appropriate
accessor macros for setting and reading the parent.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-21 13:15:17 +01:00
OGAWA Hirofumi be3b075354 [PATCH] cfq: Further rbtree traversal and cfq_exit_queue() race fix
In current code, we are re-reading cic->key after dead cic->key check.
So, in theory, it may really re-read *after* cfq_exit_queue() seted NULL.

To avoid race, we copy it to stack, then use it. With this change, I
guess gcc will assign cic->key to a register or stack, and it wouldn't
be re-readed.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-18 19:18:31 +02:00
OGAWA Hirofumi dbecf3ab40 [PATCH 2/2] cfq: fix cic's rbtree traversal
When queue dies, we set cic->key=NULL as dead mark. So, when we
traverse a rbtree, we must check whether it's still valid key. if it
was invalidated, drop it, then restart the traversal from top.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-18 09:45:18 +02:00
OGAWA Hirofumi fba822722e [PATCH 1/2] iosched: fix typo and barrier()
On rmmod path, cfq/as waits to make sure all io-contexts was
freed. However, it's using complete(), not wait_for_completion().

I think barrier() is not enough in here. To avoid the following case,
this patch replaces barrier() with smb_wmb().

	cpu0			visibility			cpu1
	                [ioc_gnone=NULL,ioc_count=1]

ioc_gnone = &all_gone		NULL,ioc_count=1
atomic_read(&ioc_count)		NULL,ioc_count=1
wait_for_completion()		NULL,ioc_count=0	atomic_sub_and_test()
				NULL,ioc_count=0	if ( && ioc_gone)
						    [ioc_gone==NULL,
						    so doesn't call complete()]
			   &all_gone,ioc_count=0

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-18 09:44:06 +02:00
Jens Axboe 206dc69b31 [BLOCK] cfq-iosched: seek and async performance fixes
Detect whether a given process is seeky and if so disable (mostly) the
idle window if it is. We still allow just a little idle time, just enough
to allow that process to submit a new request. That is needed to maintain
fairness across priority groups.

In some cases, we could setup several async queues. This is not optimal
from a performance POV, since we want all async io in one queue to perform
good sorting on it. It also impacted sync queues, as async io got too much
slice time.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-28 13:03:44 +02:00
Andreas Mohr e8a99053ea [PATCH] cfq-iosched: small cfq_choose_req() optimization
this is a small optimization to cfq_choose_req() in the CFQ I/O scheduler
(this function is a semi-often invoked candidate in an oprofile log):
by using a bit mask variable, we can use a simple switch() to check
the various cases instead of having to query two variables for each check.
Benefit: 251 vs. 285 bytes footprint of cfq_choose_req().
Also, common case 0 (no request wrapping) is now checked first in code.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-28 08:59:49 +02:00
Jens Axboe e2d74ac066 [PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to tree
On setups with many disks, we spend a considerable amount of time
looking up the process-disk mapping on each queue of io. Testing with
a NULL based block driver, this costs 40-50% reduction in throughput
for 1000 disks.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-28 08:59:01 +02:00
Matthew Dobson 93d2341c75 [PATCH] mempool: use mempool_create_slab_pool()
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.

Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:00 -08:00
Al Viro e572ec7e4e [PATCH] fix rmmod problems with elevator attributes, clean them up 2006-03-18 22:27:18 -05:00
Al Viro 3d1ab40f4c [PATCH] elevator_t lifetime rules and sysfs fixes 2006-03-18 18:35:43 -05:00
Al Viro 1cc9be68eb [PATCH] noise removal: cfq-iosched.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:35:08 -05:00
Al Viro a90d742e4c [PATCH] don't bother with refcounting for cfq_data
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:35:05 -05:00
Al Viro 6f325a1344 [PATCH] fix cfq_get_queue()/ioprio_set(2) races
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:17 -05:00
Al Viro 334e94de9b [PATCH] deal with rmmod/put_io_context() races
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:15 -05:00
Al Viro e17a9489b4 [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:12 -05:00
Al Viro 25975f863b [PATCH] stop cfq from pinning queue down
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:09 -05:00
Al Viro d9ff418793 [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:07 -05:00
Al Viro a6a0763a60 [PATCH] fix the exclusion for ioprio_set()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:04 -05:00
Al Viro 12a0573215 [PATCH] keep sync and async cfq_queue separate
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:02 -05:00
Al Viro 478a82b0ed [PATCH] switch to use of ->key to get cfq_data by cfq_io_context
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:33:59 -05:00
Al Viro 7670876d2d [PATCH] stop leaking cfq_data in cfq_set_request()
We don't need to pin ->key down; ->cfqq->cfqd will do that for us.
Incidentally, that stops the leak we had - that reference was never
dropped.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:33:56 -05:00
Al Viro b0a6916bcc [PATCH] fix cfq hash lookups
If somebody does a hash lookup for cfq_queue while ioprio of an async queue
is elevated, they shouldn't end up stuck with lowered ioprio when we go back.
Fix is to use ->org_ioprio{,class} in hash lookups.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:33:54 -05:00
Jens Axboe 7b14e3b52f [PATCH] cfq-iosched: slice expiry fixups
During testing of SLES10, we encountered a hang in the CFQ io scheduler.
Turns out the deferred slice expiry logic is buggy, so remove that for
now.  We could be left with an idle queue that would never wake up.  So
kill that logic, always expire immediately.  Also fix a potential timer
race condition.

Patch looks bigger than it is, because it moves a function.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28 00:38:02 -08:00
Arjan van de Ven 64100099ed [BLOCK] mark some block/ variables cons
the patch below marks various read-only variables in block/* as const,
so that gcc can optimize the use of them; eg gcc will replace the use by
the value directly now and will even remove the memory usage of these.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:46:02 +01:00
Coywolf Qi Hunt eb97b73d75 [BLOCK] new block/ directory comment tidy
Some leftover comments referring to drivers/block that are now block/.
They don't add any information we don't already have, so kill them.

Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-18 21:59:31 +01:00
Tejun Heo b740d98f56 [BLOCK] cfq-iosched: fix slice_left calculation
When cfq slice expires, remainder of slice is calculated and stored in
cfqq->slice_left.  Current code calculates the opposite of remainder -
how many jiffies the cfqq has used past slice end.  This patch fixes
the bug.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:56:36 +01:00
Tejun Heo 1b5ed5e1f1 [BLOCK] cfq-iosched: cfq forced dispatching fix
cfq forced dispatching might not return all requests on the queue.
This bug can hang elevator switchinig and corrupt request ordering
during flush sequence.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:55:51 +01:00
Jens Axboe 3a65dfe8c0 [BLOCK] Move all core block layer code to new block/ directory
drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.

Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04 08:43:35 +01:00