Commit Graph

175 Commits

Author SHA1 Message Date
Thomas Gleixner a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Andy Lutomirski af25ed59b5 x86/fpu: Remove clts()
The kernel doesn't use clts() any more.  Remove it and all of its
paravirt infrastructure.

A careful reader may notice that xen_clts() appears to have been
buggy -- it didn't update xen_cr0_value.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm list <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/3d3c8ca62f17579b9849a013d71e59a4d5d1b079.1477951965.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-01 07:47:55 +01:00
Andy Lutomirski cd95ea81f2 x86/fpu, lguest: Remove CR0.TS support
Now that Linux never sets CR0.TS, lguest doesn't need to support it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm list <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/8a7bf2c11231c082258fd67705d0f275639b8475.1477951965.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-01 07:47:54 +01:00
Paul Bolle cf2cf0f50c lguest: Read offset of device_cap later
Read the offset of the capability with type VIRTIO_PCI_CAP_DEVICE_CFG
only when we're sure we're going to need it. Which is when all checks
have passed and we know we have a virtio console with an emerg_wr field.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1457006501-5377-3-git-send-email-pebolle@tiscali.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-10 11:39:09 +02:00
Paul Bolle 7faf90ef99 lguest: Read length of device_cap later
Read the length of the capability with type VIRTIO_PCI_CAP_DEVICE_CFG
only when we're sure we're going to need it. Which is just before the
check whether the virtio console actually has an emerg_wr field.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1457006501-5377-2-git-send-email-pebolle@tiscali.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-10 11:39:09 +02:00
Luis R. Rodriguez 867fe800b4 x86/paravirt: Remove paravirt_enabled()
Now that all previous paravirt_enabled() uses were replaced with proper
x86 semantics by the previous patches we can remove the unused
paravirt_enabled() mechanism.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrew.cooper3@citrix.com
Cc: andriy.shevchenko@linux.intel.com
Cc: bigeasy@linutronix.de
Cc: boris.ostrovsky@oracle.com
Cc: david.vrabel@citrix.com
Cc: ffainelli@freebox.fr
Cc: george.dunlap@citrix.com
Cc: glin@suse.com
Cc: jlee@suse.com
Cc: josh@joshtriplett.org
Cc: julien.grall@linaro.org
Cc: konrad.wilk@oracle.com
Cc: kozerkov@parallels.com
Cc: lenb@kernel.org
Cc: lguest@lists.ozlabs.org
Cc: linux-acpi@vger.kernel.org
Cc: lv.zheng@intel.com
Cc: matt@codeblueprint.co.uk
Cc: mbizon@freebox.fr
Cc: rjw@rjwysocki.net
Cc: robert.moore@intel.com
Cc: rusty@rustcorp.com.au
Cc: tiwai@suse.de
Cc: toshi.kani@hp.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1460592286-300-15-git-send-email-mcgrof@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22 10:29:07 +02:00
Luis R. Rodriguez 8d152e7a5c x86/rtc: Replace paravirt rtc check with platform legacy quirk
We have 4 types of x86 platforms that disable RTC:

  * Intel MID
  * Lguest - uses paravirt
  * Xen dom-U - uses paravirt
  * x86 on legacy systems annotated with an ACPI legacy flag

We can consolidate all of these into a platform specific legacy
quirk set early in boot through i386_start_kernel() and through
x86_64_start_reservations(). This deals with the RTC quirks which
we can rely on through the hardware subarch, the ACPI check can
be dealt with separately.

For Xen things are bit more complex given that the @X86_SUBARCH_XEN
x86_hardware_subarch is shared on for Xen which uses the PV path for
both domU and dom0. Since the semantics for differentiating between
the two are Xen specific we provide a platform helper to help override
default legacy features -- x86_platform.set_legacy_features(). Use
of this helper is highly discouraged, its only purpose should be
to account for the lack of semantics available within your given
x86_hardware_subarch.

As per 0-day, this bumps the vmlinux size using i386-tinyconfig as
follows:

TOTAL   TEXT   init.text    x86_early_init_platform_quirks()
+70     +62    +62          +43

Only 8 bytes overhead total, as the main increase in size is
all removed via __init.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrew.cooper3@citrix.com
Cc: andriy.shevchenko@linux.intel.com
Cc: bigeasy@linutronix.de
Cc: boris.ostrovsky@oracle.com
Cc: david.vrabel@citrix.com
Cc: ffainelli@freebox.fr
Cc: george.dunlap@citrix.com
Cc: glin@suse.com
Cc: jlee@suse.com
Cc: josh@joshtriplett.org
Cc: julien.grall@linaro.org
Cc: konrad.wilk@oracle.com
Cc: kozerkov@parallels.com
Cc: lenb@kernel.org
Cc: lguest@lists.ozlabs.org
Cc: linux-acpi@vger.kernel.org
Cc: lv.zheng@intel.com
Cc: matt@codeblueprint.co.uk
Cc: mbizon@freebox.fr
Cc: rjw@rjwysocki.net
Cc: robert.moore@intel.com
Cc: rusty@rustcorp.com.au
Cc: tiwai@suse.de
Cc: toshi.kani@hp.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1460592286-300-5-git-send-email-mcgrof@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22 10:29:01 +02:00
Linus Torvalds e71c2c1eeb Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Main kernel side changes:

   - Big reorganization of the x86 perf support code.  The old code grew
     organically deep inside arch/x86/kernel/cpu/perf* and its naming
     became somewhat messy.

     The new location is under arch/x86/events/, using the following
     cleaner hierarchy of source code files:

       perf/x86: Move perf_event.c .................. => x86/events/core.c
       perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
       perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
       perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
       perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
       perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
       perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
       perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
       perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
       perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
       perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
       perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
       perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
       perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
       perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
       perf/x86: Move perf_event_intel_uncore_snb.c   => x86/events/intel/uncore_snb.c
       perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
       perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
       perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
       perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
       perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c

     (Borislav Petkov)

   - Update various x86 PMU constraint and hw support details (Stephane
     Eranian)

   - Optimize kprobes for BPF execution (Martin KaFai Lau)

   - Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
     Gleixner)

   - Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)

   - Various fixes and smaller cleanups.

  There are lots of perf tooling updates as well.  A few highlights:

  perf report/top:

     - Hierarchy histogram mode for 'perf top' and 'perf report',
       showing multiple levels, one per --sort entry: (Namhyung Kim)

       On a mostly idle system:

         # perf top --hierarchy -s comm,dso

       Then expand some levels and use 'P' to take a snapshot:

         # cat perf.hist.0
         -  92.32%         perf
               58.20%         perf
               22.29%         libc-2.22.so
                5.97%         [kernel]
                4.18%         libelf-0.165.so
                1.69%         [unknown]
         -   4.71%         qemu-system-x86
                3.10%         [kernel]
                1.60%         qemu-system-x86_64 (deleted)
         +   2.97%         swapper
         #

     - Add 'L' hotkey to dynamicly set the percent threshold for
       histogram entries and callchains, i.e.  dynamicly do what the
       --percent-limit command line option to 'top' and 'report' does.
       (Namhyung Kim)

  perf mem:

     - Allow specifying events via -e in 'perf mem record', also listing
       what events can be specified via 'perf mem record -e list' (Jiri
       Olsa)

  perf record:

     - Add 'perf record' --all-user/--all-kernel options, so that one
       can tell that all the events in the command line should be
       restricted to the user or kernel levels (Jiri Olsa), i.e.:

         perf record -e cycles:u,instructions:u

       is equivalent to:

         perf record --all-user -e cycles,instructions

     - Make 'perf record' collect CPU cache info in the perf.data file header:

         $ perf record usleep 1
         [ perf record: Woken up 1 times to write data ]
         [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
         $ perf report --header-only -I | tail -10 | head -8
         # CPU cache info:
         #  L1 Data                 32K [0-1]
         #  L1 Instruction          32K [0-1]
         #  L1 Data                 32K [2-3]
         #  L1 Instruction          32K [2-3]
         #  L2 Unified             256K [0-1]
         #  L2 Unified             256K [2-3]
         #  L3 Unified            4096K [0-3]

       Will be used in 'perf c2c' and eventually in 'perf diff' to
       allow, for instance running the same workload in multiple
       machines and then when using 'diff' show the hardware difference.
       (Jiri Olsa)

     - Improved support for Java, using the JVMTI agent library to do
       jitdumps that then will be inserted in synthesized
       PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
       ELF files stored in ~/.debug and keyed with build-ids, to allow
       symbol resolution and even annotation with source line info, see
       the changeset comments to see how to use it (Stephane Eranian)

  perf script/trace:

     - Decode data_src values (e.g.  perf.data files generated by 'perf
       mem record') in 'perf script': (Jiri Olsa)

         # perf script
           perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
                                                                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     - Improve support to 'data_src', 'weight' and 'addr' fields in
       'perf script' (Jiri Olsa)

     - Handle empty print fmts in 'perf script -s' i.e. when running
       python or perl scripts (Taeung Song)

  perf stat:

     - 'perf stat' now shows shadow metrics (insn per cycle, etc) in
       interval mode too.  E.g:

         # perf stat -I 1000 -e instructions,cycles sleep 1
         #         time   counts unit events
            1.000215928  519,620      instructions     #  0.69 insn per cycle
            1.000215928  752,003      cycles
         <SNIP>

     - Port 'perf kvm stat' to PowerPC (Hemant Kumar)

     - Implement CSV metrics output in 'perf stat' (Andi Kleen)

  perf BPF support:

     - Support converting data from bpf events in 'perf data' (Wang Nan)

     - Print bpf-output events in 'perf script': (Wang Nan).

         # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
         # perf script
            usleep  4882 21384.532523:   evt:  ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
             BPF output: 0000: 52 61 69 73 65 20 61 20  Raise a
                         0008: 42 50 46 20 65 76 65 6e  BPF even
                         0010: 74 21 00 00              t!..
             BPF string: "Raise a BPF event!"
         #

     - Add API to set values of map entries in a BPF object, be it
       individual map slots or ranges (Wang Nan)

     - Introduce support for the 'bpf-output' event (Wang Nan)

     - Add glue to read perf events in a BPF program (Wang Nan)

     - Improve support for bpf-output events in 'perf trace' (Wang Nan)

  ... and tons of other changes as well - see the shortlog and git log
  for details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
  perf stat: Add --metric-only support for -A
  perf stat: Implement --metric-only mode
  perf stat: Document CSV format in manpage
  perf hists browser: Check sort keys before hot key actions
  perf hists browser: Allow thread filtering for comm sort key
  perf tools: Add sort__has_comm variable
  perf tools: Recalc total periods using top-level entries in hierarchy
  perf tools: Remove nr_sort_keys field
  perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
  perf tools: Remove hist_entry->fmt field
  perf tools: Fix command line filters in hierarchy mode
  perf tools: Add more sort entry check functions
  perf tools: Fix hist_entry__filter() for hierarchy
  perf jitdump: Build only on supported archs
  tools lib traceevent: Add '~' operation within arg_num_eval()
  perf tools: Omit unnecessary cast in perf_pmu__parse_scale
  perf tools: Pass perf_hpp_list all the way through setup_sort_list
  perf tools: Fix perf script python database export crash
  perf jitdump: DWARF is also needed
  perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
  ...
2016-03-14 17:58:53 -07:00
Andrey Ryabinin 06bea3dbfe locking/lockdep: Eliminate lockdep_init()
Lockdep is initialized at compile time now.  Get rid of lockdep_init().

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: mm-commits@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09 12:03:25 +01:00
Huaitong Han 16aaa53756 x86/cpufeature: Use enum cpuid_leafs instead of magic numbers
Most of the magic numbers in x86_capability[] have been converted to
'enum cpuid_leafs', and this patch updates the remaining part.

Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: lguest@lists.ozlabs.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1453750913-4781-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01 10:46:48 +01:00
Linus Torvalds 67c707e451 Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
 "The main changes in this cycle were:

   - code patching and cpu_has cleanups (Borislav Petkov)

   - paravirt cleanups (Juergen Gross)

   - TSC cleanup (Thomas Gleixner)

   - ptrace cleanup (Chen Gang)"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch/x86/kernel/ptrace.c: Remove unused arg_offs_table
  x86/mm: Align macro defines
  x86/cpu: Provide a config option to disable static_cpu_has
  x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros
  x86/cpufeature: Cleanup get_cpu_cap()
  x86/cpufeature: Move some of the scattered feature bits to x86_capability
  x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer
  x86/paravirt: Remove unused pv_apic_ops structure
  x86/tsc: Remove unused tsc_pre_init() hook
  x86: Remove unused function cpu_has_ht_siblings()
  x86/paravirt: Kill some unused patching functions
2016-01-11 16:26:03 -08:00
David Vrabel d8c98a1d14 x86/paravirt: Prevent rtc_cmos platform device init on PV guests
Adding the rtc platform device in non-privileged Xen PV guests causes
an IRQ conflict because these guests do not have legacy PIC and may
allocate irqs in the legacy range.

In a single VCPU Xen PV guest we should have:

/proc/interrupts:
           CPU0
  0:       4934  xen-percpu-virq      timer0
  1:          0  xen-percpu-ipi       spinlock0
  2:          0  xen-percpu-ipi       resched0
  3:          0  xen-percpu-ipi       callfunc0
  4:          0  xen-percpu-virq      debug0
  5:          0  xen-percpu-ipi       callfuncsingle0
  6:          0  xen-percpu-ipi       irqwork0
  7:        321   xen-dyn-event     xenbus
  8:         90   xen-dyn-event     hvc_console
  ...

But hvc_console cannot get its interrupt because it is already in use
by rtc0 and the console does not work.

  genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0)

We can avoid this problem by realizing that unprivileged PV guests (both
Xen and lguests) are not supposed to have rtc_cmos device and so
adding it is not necessary.

Privileged guests (i.e. Xen's dom0) do use it but they should not have
irq conflicts since they allocate irqs above legacy range (above
gsi_top, in fact).

Instead of explicitly testing whether the guest is privileged we can
extend pv_info structure to include information about guest's RTC
support.

Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: vkuznets@redhat.com
Cc: xen-devel@lists.xenproject.org
Cc: konrad.wilk@oracle.com
Cc: stable@vger.kernel.org # 4.2+
Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-19 21:35:13 +01:00
Juergen Gross d6ccc3ec95 x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer
pte_update_defer can be removed as it is always set to the same
function as pte_update. So any usage of pte_update_defer() can be
replaced by pte_update().

pmd_update and pmd_update_defer are always set to paravirt_nop, so they
can just be nuked.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: jeremy@goop.org
Cc: chrisw@sous-sol.org
Cc: akataria@vmware.com
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xen.org
Cc: konrad.wilk@oracle.com
Cc: david.vrabel@citrix.com
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/1447771879-1806-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-25 23:08:37 +01:00
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Linus Torvalds 43af9872f5 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
 "This udpate contains:

   - rework the irq vector array to store a pointer to the irq
     descriptor instead of the irq number to avoid a lookup of the irq
     descriptor in the irq entry path

   - lguest interrupt handling cleanups

   - conversion of the local apic timer to the new clockevent callbacks

   - preparatory changes for the irq argument removal of interrupt flow
     handlers"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Do not dereference irq descriptor before checking it
  tools/lguest: Clean up include dir
  tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap
  x86/irq: Store irq descriptor in vector array
  genirq: Provide irq_desc_has_action
  x86/irq: Get rid of an indentation level
  x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED
  x86/irq: Replace numeric constant
  x86/irq: Protect smp_cleanup_move
  x86/lguest: Do not setup unused irq vectors
  x86/lguest: Clean up lguest_setup_irq
  x86/apic: Drop local_irq_save/restore in timer callbacks
  x86/apic: Migrate apic timer to new set_state interface
  x86/irq: Use access helper irq_data_get_affinity_mask()
  x86/irq: Use accessor irq_data_get_irq_handler_data()
  x86/irq: Use accessor irq_data_get_node()
2015-09-01 15:20:51 -07:00
Thomas Gleixner a782a7e46b x86/irq: Store irq descriptor in vector array
We can spare the irq_desc lookup in the interrupt entry code if we
store the descriptor pointer in the vector array instead the interrupt
number.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/20150802203609.717724106@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06 00:14:59 +02:00
Thomas Gleixner ad3f8d5afe x86/lguest: Do not setup unused irq vectors
No point in assigning the interrupt vectors if there is no interrupt
chip installed. Move it to lguest_setup_irq() and call it from
lguest_enable_irq.

[ rusty: Typo fix and error handling ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/1438662776-4823-2-git-send-email-rusty@rustcorp.com.au
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06 00:14:58 +02:00
Rusty Russell 27a6f41c1a x86/lguest: Clean up lguest_setup_irq
We make it static and hoist it higher in the file for the next patch.
We also give a nice panic if it fails during boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/1438662776-4823-1-git-send-email-rusty@rustcorp.com.au
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06 00:14:58 +02:00
Viresh Kumar c2e13cc2ce x86/lguest/timer: Migrate to new set-state interface
Migrate lguest driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything while switching modes other than in shutdown
mode and so those are not implemented.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-and-tested-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: linaro-kernel@lists.linaro.org
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: lguest@lists.ozlabs.org (open list:LGUEST)
Link: http://lkml.kernel.org/r/b96f1c308f4523255c5394a4e6e13f2b67685402.1437042675.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 21:25:38 +02:00
Linus Torvalds d70b3ef54c Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...
2015-06-22 17:59:09 -07:00
Ingo Molnar df6b35f409 x86/fpu: Rename i387.h to fpu/api.h
We already have fpu/types.h, move i387.h to fpu/api.h.

The file name has become a misnomer anyway: it offers generic FPU APIs,
but is not limited to i387 functionality.

Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19 15:47:30 +02:00
Brian Gerst 51bb92843e x86/asm/entry: Remove SYSCALL_VECTOR
Use IA32_SYSCALL_VECTOR for both compat and native.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431185813-15413-4-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-10 12:34:28 +02:00
Linus Torvalds b9bb6fb73b Some virtio internal cleanups, a new virtio device "virtio input", and
a change to allow the legacy virtio balloon.
 
 Most excitingly, some lguest work!  No seriously, I got some cleanup
 patches.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVN1SjAAoJENkgDmzRrbjxeDoP+wZnZdG4cHNc6ifiNPkSed9m
 cKWV7L6uTxczdFKcTNpDShn2MW0XqbcHc+VdBH9Exl3+cyick6fuhpi6SjLby0g6
 a40RldysRMAc/K/dK40dG4qtSUT1uwDrOYNonMDjx1RAikO3DoTGUm4YgYZKSlM/
 pKuCbAebM3dZ6EUVnaJICHWkJvY7Bk9JwGL6Z8RhF7lunVAGqIMHH9GklqSCyNiY
 LK+05hNXHv/OOIAkEO+ZmDrWSagogggGXEdRFom9s87xmu9GVse7Fzfq9pZ5nQre
 gickgBeC+gN8das1wvhlTp22F8XJslC0IRJhvbwLMQUd16hrH1YUIdvsqry/Qxds
 04GgzLTVA/Z5VVEVm9MXcKWGwcsnUBu9EChsdEKZwNgBz9UF2gs39My8Co6AZ7U/
 Ajcpksl22RXaR7OB65vRPIk23mh/NchGSzVGFbppzCwj2SkO9ONSFrDj3mAzfbhR
 9NHi32Xm0+LdN444WCo1NzahKLAX5bYCv2ZSDs5JEBDQzmW2FWKO2ZaVJ84jpG6O
 O4XppI/X8cP+dxTs8xH91qh9GGmq9Aa41iuekZh/jG/8fLFT45rhlzLJfwh2B9rI
 djcaFFLFt+in5R6kgugM9dbCNALneXgGDnzlmqy5RwOrrCTwhyGn6DMwDqRz7EHn
 gsbiiv6eSsrgX4mLHP2n
 =Wj06
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "Some virtio internal cleanups, a new virtio device "virtio input", and
  a change to allow the legacy virtio balloon.

  Most excitingly, some lguest work! No seriously, I got some cleanup
  patches"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: drop virtio_device_is_legacy_only
  virtio_pci: support non-legacy balloon devices
  virtio_mmio: support non-legacy balloon devices
  virtio_ccw: support non-legacy balloon devices
  virtio: balloon might not be a legacy device
  virtio_balloon: transitional interface
  virtio_ring: Update weak barriers to use dma_wmb/rmb
  virtio_pci_modern: switch to type-safe io accessors
  virtio_pci_modern: type-safe io accessors
  lguest: handle traps on the "interrupt suppressed" iret instruction.
  virtio: drop a useless config read
  virtio_config: reorder functions
  Add virtio-input driver.
  lguest: suppress interrupts for single insn, not range.
  lguest: simplify lguest_iret
  lguest: rename i386_head.S in the comments
  lguest: explicitly set miscdevice's private_data NULL
  lguest: fix pending interrupt test.
2015-04-22 10:55:06 -07:00
Denys Vlasenko 3304c9c37b x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout
Interrupt entry points are handled with the following code,
each 32-byte code block contains seven entry points:

		...
		[push][jump 22] // 4 bytes
		[push][jump 18] // 4 bytes
		[push][jump 14] // 4 bytes
		[push][jump 10] // 4 bytes
		[push][jump  6] // 4 bytes
		[push][jump  2] // 4 bytes
		[push][jump common_interrupt][padding] // 8 bytes

		[push][jump]
		[push][jump]
		[push][jump]
		[push][jump]
		[push][jump]
		[push][jump]
		[push][jump common_interrupt][padding]

		[padding_2]
	common_interrupt:

And there is a table which holds pointers to every entry point,
IOW: to every push.

In cold cache, two jumps are still costlier than one, even
though we get the benefit of them residing in the same
cacheline.

This change replaces short jumps with near ones to
'common_interrupt', and pads every push+jump pair to 8 bytes. This
way, each interrupt takes only one jump.

This change replaces ".p2align CONFIG_X86_L1_CACHE_SHIFT" before
dispatch table with ".align 8" - we do not need anything
stronger than that.

The table of entry addresses (the interrupt[] array) is no
longer necessary, the address of entries can be easily
calculated as (irq_entries_start + i*8).

   text	   data	    bss	    dec	    hex	filename
  12546	      0	      0	  12546	   3102	entry_64.o.before
  11626	      0	      0	  11626	   2d6a	entry_64.o

The size decrease is because 1656 bytes of .init.rodata are
gone. That's initdata, though. The resident size does go up a
bit.

Run-tested (32 and 64 bits).

Acked-and-Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1428090553-7283-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08 09:02:13 +02:00
Rusty Russell 2f921b5bb0 lguest: suppress interrupts for single insn, not range.
The last patch reduced our interrupt-suppression region to one address,
so simplify the code somewhat.

Also, remove the obsolete undefined instruction ranges and the comment
which refers to lguest_guest.S instead of head_32.S.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24 11:52:08 +10:30
Denys Vlasenko 7042cb4eb3 lguest: simplify lguest_iret
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: lguest@lists.ozlabs.org
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24 11:52:08 +10:30
Alexander Kuleshov 41f055d49c lguest: rename i386_head.S in the comments
i386_head.S renamed to the head_32.S, let's update it in
the comments too.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24 11:52:07 +10:30
Rusty Russell 88ad1a147e lguest: fix pending interrupt test.
Denys says:
  TEST with zero will always set ZF. Thus, "jnz send_interrupts" never jumps.

We get interrupts regularly enough that this didn't cause immediate problems.

Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-20 15:07:08 +10:30
Andy Lutomirski 8ef46a672a x86/asm/entry: Add this_cpu_sp0() to read sp0 for the current cpu
We currently store references to the top of the kernel stack in
multiple places: kernel_stack (with an offset) and
init_tss.x86_tss.sp0 (no offset).  The latter is defined by
hardware and is a clean canonical way to find the top of the
stack.  Add an accessor so we can start using it.

This needs minor paravirt tweaks.  On native, sp0 defines the
top of the kernel stack and is therefore always correct.  On Xen
and lguest, the hypervisor tracks the top of the stack, but we
want to start reading sp0 in the kernel.  Fixing this is simple:
just update our local copy of sp0 as well as the hypervisor's
copy on task switches.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8d675581859712bee09a055ed8f785d80dac1eca.1425611534.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-06 08:32:57 +01:00
Rusty Russell f476893459 lguest: update help text.
We now add about 10k, not 6k, when lguest support is compiled in.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-19 14:44:32 +10:30
Rusty Russell b0bd96fe9a lguest: now depends on PCI
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-19 12:31:14 +10:30
Rusty Russell 55c2d7884e lguest: don't look in console features to find emerg_wr.
The 1.0 spec clearly states that you must set the ACKNOWLEDGE and
DRIVER status bits before accessing the feature bits.  This is a
problem for the early console code, which doesn't really want to
acknowledge the device (the spec specifically excepts writing to the
console's emerg_wr from the usual ordering constrains).

Instead, we check that the *size* of the device configuration is
sufficient to hold emerg_wr: at worst (if the device doesn't support
the VIRTIO_CONSOLE_F_EMERG_WRITE feature), it will ignore the
writes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13 17:15:51 +10:30
Rusty Russell a561adfaec lguest: use the PCI console device's emerg_wr for early boot messages.
This involves manually checking the console device (which is always in
slot 1 of bus 0) and using the window in VIRTIO_PCI_CAP_PCI_CFG to
program it (as we can't map the BAR yet).

We could in fact do this much earlier, but we wait for the first
write from the virtio_cons_early_init() facility.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:44 +10:30
Rusty Russell e1b83e2788 lguest: Override pcibios_enable_irq/pcibios_disable_irq to our stupid PIC
This lets us deliver interrupts for our emulated PCI devices using our
dumb PIC, and not emulate an 8259 and PCI irq mapping tables or whatever.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:34 +10:30
Rusty Russell ee72576c14 lguest: disable ACPI explicitly.
Once we add PCI, it starts trying to manage our interrupts.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:34 +10:30
Rusty Russell d1c29465b8 lguest: don't disable iospace.
This no longer speeds up boot (IDE got better, I guess), but it does stop
us probing for a PCI bus.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:32 +10:30
Jan Beulich 2414e021ac x86: Avoid building unused IRQ entry stubs
When X86_LOCAL_APIC (i.e. unconditionally on x86-64),
first_system_vector will never end up being higher than
LOCAL_TIMER_VECTOR (0xef), and hence building stubs for vectors
0xef...0xff is pointlessly reducing code density. Deal with this at
build time already.

Taking into consideration that X86_64 implies X86_LOCAL_APIC, also
simplify (and hence make easier to read and more consistent with the
change done here) some #if-s in arch/x86/kernel/irqinit.c.

While we could further improve the packing of the IRQ entry stubs (the
four ones now left in the last set could be fit into the four padding
bytes each of the final four sets have) this doesn't seem to provide
any real benefit: Both irq_entries_start and common_interrupt getting
cache line aligned, eliminating the 30th set would just produce 32
bytes of padding between the 29th and common_interrupt.

[ tglx: Folded lguest fix from Dan Carpenter ]

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: lguest@lists.ozlabs.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/54574D5F0200007800044389@mail.emea.novell.com
Link: http://lkml.kernel.org/r/20141115185718.GB6530@mwanda
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-16 14:08:14 +01:00
Andi Kleen 2605fc216f asmlinkage, x86: Add explicit __visible to arch/x86/*
As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.

Tree sweep for arch/x86/*

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 16:07:44 -07:00
Andi Kleen 9549b9b347 x86, asmlinkage, lguest: Fix C functions used by inline assembler
- Make the C code used by the paravirt stubs visible
- Since they have to be global now, give them a more unique
name.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29 22:17:17 -08:00
Rusty Russell aa96a3c686 lguest: fix GPF in guest when using gdb.
Since the Guest is in ring 1, it can't read the debug registers: doing
so gives a number of nasty messages:

(gdb) run
Starting program: /bin/sleep
[   31.170230] general protection fault: 0000 [#1] SMP
[   31.170230] Modules linked in:
[   31.170230] CPU: 0 PID: 2678 Comm: sleep Not tainted 3.11.0+ #64
[   31.170230] task: cc5c09b0 ti: cc79c000 task.ti: cc79c000
[   31.170230] EIP: 0061:[<c01333d8>] EFLAGS: 00000097 CPU: 0
[   31.170230] EIP is at native_get_debugreg+0x58/0x70
[   31.170230] EAX: 00000006 EBX: cc79dfb4 ECX: b7fff918 EDX: 00000000
[   31.170230] ESI: cc5c09b0 EDI: 00000000 EBP: cc79df84 ESP: cc79df84
[   31.170230]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
[   31.170230] CR0: 00000008 CR2: 081ba69a CR3: 0e2f2000 CR4: 00000000

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-06 08:09:28 +09:30
Holger Hans Peter Freyther b21e332d24 lguest: Point to the right directory for the lguest launcher
The code was moved in 07fe9977b6 but
the comment was not updated. The reference in drivers/vhost/vhost.c
is left alone as it is historic.

Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-15 11:18:31 +09:30
Linus Torvalds 21884a83b2 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...
2013-07-06 14:09:38 -07:00
Linus Torvalds baa6f82093 Simple warning fix for module sections. If too late to pull, no big deal.
Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0NO+AAoJENkgDmzRrbjxS0YP/RoI5WguUDVx8tIdS29pwe9L
 Z5U0uIDUBZkNftlvvkdqdGjU1MeejxoMIs6cMz6ScY6YEI7li1AzuNApRadflnMx
 Do9u999NylI6q2oCLrt9y/eliJ/p5hkeCbhDrGdCgB7rPCjEAp/+Eu9Kq7FO8AYr
 Qu0rpLjvJ/5c5lsLAmUn95lZZ/uc/EPHasfZDiR8eGHRoAvPeyJ5qR06MpHFcl33
 2EKwR8RCYP9yUdqWnSKlC4LTuIpNK/BjEpHcQK2UPSn49vR8B3gVz5VXNP/7nIYQ
 hCr3VGoEOBoAlsD38IuKycXQ7vmBTU2hq7bQPq7Z6wyH96Sb6xFmVqT1Dm7uAI4+
 3OU69ugQb7WM3hQjeRRFvn5WjPqu8THwJKU7vhEf+xA09+v09QFjbHoEFabrFDlo
 MqVVhelkT6Mo8bBrxl8sZc/CG+aSl/kLQfyXWIcR2MQEAlfYKOYuDz+5TXtMZHaR
 SwlxgE2wbPP54v27yQWfBWY4d7dtJ+OX25GW1yzJdsNUFg7fQ9zzMnrv1prsUlog
 bxs4P0JcBOMLZx2IWm0R2kmbRFYjPgj6Kr3VnrIhZGesG1cwQB2QNvEPEkCtl6kq
 8HdX8Tua3dpfKAhDxnlztpVcJUmTuLn95jMWjW1KhCcjOqqJbaElq9ubplP2eMtr
 7zlfzFq9RsBKG0+J98Gt
 =vZYj
 -----END PGP SIGNATURE-----
mergetag object b3087e48ce
 type commit
 tag virtio-next-for-linus
 tagger Rusty Russell <rusty@rustcorp.com.au> 1372639977 +0930
 
 Was away, but it's all trivial and been sitting in linux-next.  So if you don't
 pull, no electrons will be harmed.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0NMjAAoJENkgDmzRrbjxf3EQALoIAuQAjiEcHTGkLd/hGMJk
 mDiN14CXNH0siKASlCfcAxudJxKfIRM1tYzMFV1e7DtC7ZAH43m/SYBmXC4hRpIz
 nHsv57xtUg8bGZgb2OZKX/L0rqiE5wxtK7ZWGIPh3aE4uZKif+YvSBNJniO/HRTl
 UVDbrp+sbZzbT8NIHQ8d2vdtfG7rCNRkVaaETxk1wguu2TGJkyt0xuU3zT54We0L
 M8rJuHyTplgEMuDUydmNi9uNPZJZZY7QqoZ7s+ubXELo2FcFeyqWP2oHZnywESok
 fWOfhgdgIgmTED/eXS9wGwB7+K6azKg2chA23QZ91ncX/Ts141sEAd9ezwuQZc+5
 VS/Lo2mRvWbEcG78uYGUz+ukltZv0Og6uOvfSfCrALcVA4pYNFJTjbRu+Io+qAml
 082byeBUT/eurZr7xE30b4aTvZV2bYfqFkVynjF9ugNvTTjMiruw8uAzep6DD1gl
 38XRwtrk6MHLAFuxsyNV1FgunIWB6zvXNjMTUUVDLAQCbZwxZArr9gDd4zUG9VTS
 EbA9TIulSMMLUve5zZQyByqRLlzmzDVghMOZVbYUOQN4uNxbAPoXZ87tpiRhk8Oc
 XW+LRABjwZOjiQ9SDWRxxb8p2WTVyjuwIOTE0pLCuEBw6RFmjGga+PzH9rDygJnF
 zEIbVDRT9Jj7rOtxSabE
 =p6z7
 -----END PGP SIGNATURE-----

Merge tags 'modules-next-for-linus' and 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull trivial module and virtio fixes from Rusty Russell.

Apparently these were meant for 3.10, but came in after the release.

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost.c: Add .text.unlikely to TEXT_SECTIONS

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: remove virtqueue_add_buf().
  lguest: rename i386_head.S
  virtio_blk: Add missing 'static' qualifiers
  virtio: console: Add emergency writeonly register to config space
  virtio_pci: better macro exported in uapi
2013-07-03 13:09:06 -07:00
H. Peter Anvin 60e019eb37 x86: Get rid of ->hard_math and all the FPU asm fu
Reimplement FPU detection code in C and drop old, not-so-recommended
detection method in asm. Move all the relevant stuff into i387.c where
it conceptually belongs. Finally drop cpuinfo_x86.hard_math.

[ hpa: huge thanks to Borislav for taking my original concept patch
  and productizing it ]

[ Boris, note to self: do not use static_cpu_has before alternatives! ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-06 14:32:04 -07:00
David Vrabel 3565184ed0 x86: Increase precision of x86_platform.get/set_wallclock()
All the virtualized platforms (KVM, lguest and Xen) have persistent
wallclocks that have more than one second of precision.

read_persistent_wallclock() and update_persistent_wallclock() allow
for nanosecond precision but their implementation on x86 with
x86_platform.get/set_wallclock() only allows for one second precision.
This means guests may see a wallclock time that is off by up to 1
second.

Make set_wallclock() and get_wallclock() take a struct timespec
parameter (which allows for nanosecond precision) so KVM and Xen
guests may start with a more accurate wallclock time and a Xen dom0
can maintain a more accurate wallclock for guests.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28 14:00:59 -07:00
Daniel Baluta 6865b32a86 lguest: rename i386_head.S
Since commit 9a163ed8e0 (i386: move kernel) kernel/i386_head.S
was renamed to kernel/head_32.S. We do the same for lguest/i386_head.S.

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-20 12:09:40 +09:30
Linus Torvalds 1e2f5b598a Merge branch 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt update from Ingo Molnar:
 "Various paravirtualization related changes - the biggest one makes
  guest support optional via CONFIG_HYPERVISOR_GUEST"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, wakeup, sleep: Use pvops functions for changing GDT entries
  x86, xen, gdt: Remove the pvops variant of store_gdt.
  x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed
  x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed.
  x86: Make Linux guest support optional
  x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu
2013-04-30 08:41:21 -07:00
Boris Ostrovsky 511ba86e1d x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
Invoking arch_flush_lazy_mmu_mode() results in calls to
preempt_enable()/disable() which may have performance impact.

Since lazy MMU is not used on bare metal we can patch away
arch_flush_lazy_mmu_mode() so that it is never called in such
environment.

[ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU
  updates" may cause a minor performance regression on
  bare metal.  This patch resolves that performance regression.  It is
  somewhat unclear to me if this is a good -stable candidate. ]

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.com
Tested-by: Josh Boyer <jwboyer@redhat.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> SEE NOTE ABOVE
2013-04-10 11:25:10 -07:00
Borislav Petkov 6276a074c6 x86: Make Linux guest support optional
Put all config options needed to run Linux as a guest behind a
CONFIG_HYPERVISOR_GUEST menu so that they don't get built-in by default
but be selectable by the user. Also, make all units which depend on
x86_hyper, depend on this new symbol so that compilation doesn't fail
when CONFIG_HYPERVISOR_GUEST is disabled but those units assume its
presence.

Sort options in the new HYPERVISOR_GUEST menu, adapt config text and
drop redundant select.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1362428421-9244-3-git-send-email-bp@alien8.de
Cc: Dmitry Torokhov <dtor@vmware.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-04 13:14:25 -08:00
Linus Torvalds 2ef14f465b Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Peter Anvin:
 "This is a huge set of several partly interrelated (and concurrently
  developed) changes, which is why the branch history is messier than
  one would like.

  The *really* big items are two humonguous patchsets mostly developed
  by Yinghai Lu at my request, which completely revamps the way we
  create initial page tables.  In particular, rather than estimating how
  much memory we will need for page tables and then build them into that
  memory -- a calculation that has shown to be incredibly fragile -- we
  now build them (on 64 bits) with the aid of a "pseudo-linear mode" --
  a #PF handler which creates temporary page tables on demand.

  This has several advantages:

  1. It makes it much easier to support things that need access to data
     very early (a followon patchset uses this to load microcode way
     early in the kernel startup).

  2. It allows the kernel and all the kernel data objects to be invoked
     from above the 4 GB limit.  This allows kdump to work on very large
     systems.

  3. It greatly reduces the difference between Xen and native (Xen's
     equivalent of the #PF handler are the temporary page tables created
     by the domain builder), eliminating a bunch of fragile hooks.

  The patch series also gets us a bit closer to W^X.

  Additional work in this pull is the 64-bit get_user() work which you
  were also involved with, and a bunch of cleanups/speedups to
  __phys_addr()/__pa()."

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (105 commits)
  x86, mm: Move reserving low memory later in initialization
  x86, doc: Clarify the use of asm("%edx") in uaccess.h
  x86, mm: Redesign get_user with a __builtin_choose_expr hack
  x86: Be consistent with data size in getuser.S
  x86, mm: Use a bitfield to mask nuisance get_user() warnings
  x86/kvm: Fix compile warning in kvm_register_steal_time()
  x86-32: Add support for 64bit get_user()
  x86-32, mm: Remove reference to alloc_remap()
  x86-32, mm: Remove reference to resume_map_numa_kva()
  x86-32, mm: Rip out x86_32 NUMA remapping code
  x86/numa: Use __pa_nodebug() instead
  x86: Don't panic if can not alloc buffer for swiotlb
  mm: Add alloc_bootmem_low_pages_nopanic()
  x86, 64bit, mm: hibernate use generic mapping_init
  x86, 64bit, mm: Mark data/bss/brk to nx
  x86: Merge early kernel reserve for 32bit and 64bit
  x86: Add Crash kernel low reservation
  x86, kdump: Remove crashkernel range find limit for 64bit
  memblock: Add memblock_mem_size()
  x86, boot: Not need to check setup_header version for setup_data
  ...
2013-02-21 18:06:55 -08:00