Commit Graph

1710 Commits

Author SHA1 Message Date
Julia Lawall 5a2772a820 PM / AVS: rockchip-io: account for const type of of_device_id.data
This driver creates a number of const structures that it stores in the
data field of an of_device_id array.

The data field of an of_device_id structure has type const void *, so
there is no need for a const-discarding cast when putting const values
into such a structure.

Furthermore, adding const to the declaration of the location that
receives a const value from such a field ensures that the compiler
will continue to check that the value is not modified.  The
const-discarding cast on the extraction from the data field is
thus no longer needed.

Done using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-05 13:36:33 +01:00
Pavel Machek 70a39e1075 Add support for bq27521 battery monitor
This adds basic support for BQ27521 battery monitor, used in Nokia N9
and N950. In particular, battery voltage is important to be able to
tell when the battery is almost empty. Emptying battery on N950 is
pretty painful, as flasher needs to be used to recover phone in such case.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andrew F. Davis <afd@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-08 18:02:15 +01:00
Hans de Goede d16002755d power: supply: bq24190_charger: Remove extcon handling
Now that drivers/i2c/busses/i2c-cht-wc.c uses
"input-current-limit-from-supplier" instead of "extcon-name" the last
user of the bq24190 extcon code is gone, remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:43:21 +01:00
Mike Looijmans 5f2f0d6105 power: ltc2941-battery-gauge: Disable continuous monitoring on shutdown
The driver sets the fuel gauge to continuous monitoring on startup, for
the models that support this. When the board shuts down, the chip remains
in that mode, causing a few mA drain on the battery every 2 or 10 seconds.

This patch registers a shutdown handler that turns off the monitoring to
prevent this battery drain.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:41:05 +01:00
Arvind Yadav aac7990407 power: supply: cpcap-battery: Fix platform_get_irq_byname's error checking
The platform_get_irq_byname() function returns -1 if an error occurs.
zero or positive number on success. platform_get_irq_byname() error
checking for zero is not correct.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:22:10 +01:00
Christophe JAILLET 09edcb6475 power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'
If an error occurs when we enable the backup battery charging, we should
go through the error handling path directly.

Before commit db43e6c473 ("ab8500-bm: Add usb power path support") this
was the case, but this commit has added some code between the last test and
the 'out' label.
So, in case of error, this added code is executed and the error may be
silently ignored.

Fix it by adding the missing 'goto out', as done in all other error
handling paths.

Fixes: db43e6c473 ("ab8500-bm: Add usb power path support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:21:18 +01:00
Christophe JAILLET bf59fddde1 power: supply: ab8500_charger: Fix an error handling path
'ret' is know to be 0 at this point, because it has not been updated by the
the previous call to 'abx500_mask_and_set_register_interruptible()'.

Fix it by updating 'ret' before checking if an error occurred.

Fixes: 84edbeeab6 ("ab8500-charger: AB8500 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:21:18 +01:00
Ryosuke Saito f46b151ede power: supply: charger-manager: Fix typo in condition
Should be discharging_max_duration_ms, not charging_max_duration_ms.

Signed-off-by: Ryosuke Saito <raitosyo@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:14:06 +01:00
Jesse Chan 348c7cf5fc power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:10:48 +01:00
Dan Carpenter 7d54d0d38e power: supply: sbs-message: double left shift bug in sbsm_select()
The original code does this: "1 << (1 << 11)" which is undefined in C.

Fixes: dbc4deda03 ("power: Adds support for Smart Battery System Manager")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-12-01 16:08:00 +01:00
Linus Torvalds 19b9aaf8a5 power supply and reset changes for the v4.15 series
* Misc. minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAloMMiIACgkQ2O7X88g7
 +po5Tg//cT+BUtyJuzHvBLt59OG7/qkMv5Kkazr6ZQIAD2gLp7aYQjLyqG82bnXI
 a/vEp0mXY6IWtmUmh0dk/sn8UUBFPyTxxAEKt1z/ygEf8/2Cozcji1QtEfqGpR2S
 5EDGneJ4aoLuBmNYEfOmw9ohr6uNhhhSZ46ev0k73pEPGZHU2BxRLDf8/hzuBRX/
 w8hMwF/5Mi5dREtjk0axauQwB7xCurxrHHPjaXDhPdYorLJ/xXcXUgc0fX6RvE9p
 ZIQEy5ESPsYdazSAW/Dtn0UgfFYuscWAh76lAxw3fQrlIbbVdy7rqrnUDJgh9qCP
 GW8vfK3IQi7oB4Y+H1Iyjl4e2tJKVPRugG8vfSQVWaVM2uVjD5dYTG/c9nPd968h
 7waPCpToPkP3Mv5MrXB049KNey06Jm8pMUmSzW2aMQhXHTwTBlubVpz2xCVbYYzM
 OJtOmv4D5i/qSO1cDvZUosF0yXnkCk0u9ZF9L0JAqznd7s0ZbJES6/Etjwo/TM2R
 RB5Ucu3nc8QXBhoH+AASPThkG7QmRDkzliaO9fIl18g4LiMAMYMmGB5bhTjc5Eog
 p7P3uVqMx8z9yqouX9+eJC6PbgiLm+oHesO6w4lxqFp/izeDvgQZrlRFqMAWxftU
 jLVSvkPjPD6JVdUG4cbkZfwyJ1doOS6djbmKC9Pi8kc01xV5nuY=
 =9LP+
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - misc minor fixes

* tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: cpcap-charger: fix incorrect return value check
  power: supply: replace pr_* with dev_*
  power: supply: pcf50633-charger: remove redundant variable charging_start
  power: supply: generic-adc-battery: remove redundant variable pdata
  power: supply: max8997: Improve a size determination in probe
2017-11-15 13:37:15 -08:00
Linus Torvalds 9682b3dea2 Merge branch 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual rocket-science from trivial tree for 4.15"

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  MAINTAINERS: relinquish kconfig
  MAINTAINERS: Update my email address
  treewide: Fix typos in Kconfig
  kfifo: Fix comments
  init/Kconfig: Fix module signing document location
  misc: ibmasm: Return error on error path
  HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
  MAINTAINERS: Correct path to uDraw PS3 driver
  tracing: Fix doc mistakes in trace sample
  tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
  MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
  mm/huge_memory.c: fixup grammar in comment
  lib/xz: Add fall-through comments to a switch statement
2017-11-15 10:14:11 -08:00
Linus Torvalds 4008e6a9bc Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...
2017-11-14 17:52:21 -08:00
Linus Torvalds 894025f24b USB/PHY patches for 4.15-rc1
Here is the big set of USB and PHY driver updates for 4.15-rc1.
 
 There is the usual amount of gadget and xhci driver updates, along with
 phy and chipidea enhancements.  There's also a lot of SPDX tags and
 license boilerplate cleanups as well, which provide some churn in the
 diffstat.
 
 Other major thing is the typec code that moved out of staging and into
 the "real" part of the drivers/usb/ tree, which was nice to see happen.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgm/Vw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yktXwCdGgpInfOEvOGFd83EPDL7a1ncyc4AoM5wI8yl
 1CeLipqVIN3IsMMJptvb
 =zvDI
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...
2017-11-13 21:14:07 -08:00
Pan Bian 838c8afa67 power: supply: cpcap-charger: fix incorrect return value check
Function platform_get_irq_byname() returns a negative error code on
failure, and a zero or positive number on success. However, in function
cpcap_usb_init_irq(), positive IRQ numbers are also taken as error
cases. Use "if (irq < 0)" instead of "if (!irq)" to validate the return
value of platform_get_irq_byname().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-13 11:56:12 +01:00
Rafael J. Wysocki 040e8a4a4c Merge branches 'pm-pci', 'pm-avs' and 'pm-docs'
* pm-pci:
  PCI / PM: Add dev_dbg() to print device suspend power states
  PCI / PM: Do not resume any devices in pci_pm_prepare()

* pm-avs:
  PM / AVS: Use %pS printk format for direct addresses

* pm-docs:
  PM: docs: Fix formatting typo in devices.rst
2017-11-13 01:32:25 +01:00
Aishwarya Pant 33a7067732 power: supply: replace pr_* with dev_*
Use kernel preferred dev_* family of functions in place of pr_*,
wherever a device object is present.

Done with the help of coccinelle.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06 13:59:41 +01:00
Colin Ian King e7c984cc6f power: supply: pcf50633-charger: remove redundant variable charging_start
Variable charging_start is being set but is never read, it is therefore
redundant and can be removed. Cleans up sparse warning:

drivers/power/supply/pcf50633-charger.c:61:3: warning: Value stored to
'charging_start' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06 13:49:57 +01:00
Colin Ian King 393ce139d5 power: supply: generic-adc-battery: remove redundant variable pdata
Pointer pdata is assigned but never used, so remove it. Cleans up the
clang warning:

drivers/power/supply/generic-adc-battery.c:211:2: warning: Value
stored to 'pdata' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06 13:49:14 +01:00
Markus Elfring c09c65ca5c power: supply: max8997: Improve a size determination in probe
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06 13:49:12 +01:00
Paul Burton fb615d61b5 Update MIPS email addresses
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:

 - Have 10 or more patches in mainline authored using an @imgtec.com
   email address, or any patches dated within the past year.

 - Are still with Imagination but leaving as part of the MIPS business
   unit, as determined from an internal email address list.

 - Haven't already updated their email address (ie. JamesH) or expressed
   a desire to be excluded (ie. Maciej).

 - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
   myself.

New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list.  An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.

Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03 09:02:30 -07:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Wolfram Sang 4cf419a2b4 power: supply: sbs-message: fix some code style issues
Use 'unsigned int' and curly braces for 'else'.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-29 00:50:44 +02:00
Wolfram Sang 5e9bee5267 power: supply: sbs-battery: remove unchecked return var
Since the return value is not checked anyhow, we don't need to store it.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-29 00:45:59 +02:00
Wolfram Sang 9410b7d710 power: supply: sbs-battery: remove superfluous variable init
Those variables are immediately assigned a value afterwards.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-29 00:42:10 +02:00
Phil Reid 1cf855535b power: supply: sbs-battery: move gpio present detect to sbs_get_property
Currently when a gpio is defined for battery presence it is only used in
the sbs_get_battery_presence_and_health function for 2 properties.
All other properties currently try to read data form the battery before
returning an error if not present. We should know in advance that no
data is going to returned.

As the driver tries multiple times to access a property, this prevents
a lot of smbus accesses, which had a significant effect on device boot-up.
As when the device is registered lots of property accesses are attempted
during boot.

If no gpio is used for presence detection no change in behaviour should
occur.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28 23:43:32 +02:00
Phil Reid a0b8839e2a power: supply: sbs-manager: Add alert callback and battery change notification
This adds smb alert support via the smbus_alert driver to generate
power_supply_changed notifications when either external power is
removed / applied or a battery inserted / removed.
Use the i2c alert callback to notify the attached battery driver that a
change has occurred.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28 23:43:25 +02:00
Karl-Heinz Schneider dbc4deda03 power: Adds support for Smart Battery System Manager
This patch adds support for Smart Battery System Manager.
A SBSM is a device listening at I2C/SMBus address 0x0a and is capable of
communicating up to four I2C smart battery devices. All smart battery
devices are listening at address 0x0b, so the SBSM muliplexes between
them. The driver makes use of the I2C-Mux framework to allow smart
batteries to be bound via device tree, i.e. the sbs-battery driver.

Via sysfs interface the online state and charge type are presented. If
the driver is bound as ltc1760 (an implementation of a Dual Smart Battery
System Manager) the charge type can also be changed from trickle to fast.

Signed-off-by: Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28 23:43:19 +02:00
Chanwoo Choi 176aa36012 extcon: Split out extcon header file for consumer and provider device
The extcon has two type of extcon devices as following.
- 'extcon provider deivce' adds new extcon device and detect the
   state/properties of external connector. Also, it notifies the
   state/properties to the extcon consumer device.
- 'extcon consumer device' gets the change state/properties
   from extcon provider device.
Prior to that, include/linux/extcon.h contains all exported API for
both provider and consumer device driver. To clarify the meaning of
header file and to remove the wrong use-case on consumer device,
this patch separates into extcon.h and extcon-provider.h.

[Description for include/linux/{extcon.h|extcon-provider.h}]
- extcon.h includes the extcon API and data structure for extcon consumer
  device driver. This header file contains the following APIs:
  : Register/unregister the notifier to catch the change of extcon device
  : Get the extcon device instance
  : Get the extcon device name
  : Get the state of each external connector
  : Get the property value of each external connector
  : Get the property capability of each external connector

- extcon-provider.h includes the extcon API and data structure for extcon
  provider device driver. This header file contains the following APIs:
  : Include 'include/linux/extcon.h'
  : Allocate the memory for extcon device instance
  : Register/unregister extcon device
  : Set the state of each external connector
  : Set the property value of each external connector
  : Set the property capability of each external connector

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23 14:07:58 +09:00
Masanari Iida 83fc61a563 treewide: Fix typos in Kconfig
This patch fixes some spelling typos found in Kconfig files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-12 15:42:00 +02:00
Helge Deller e200052f82 PM / AVS: Use %pS printk format for direct addresses
Use the %pS instead of the %pF printk format specifier for printing
symbols from direct addresses. This is needed for the ia64, ppc64 and
parisc64 architectures.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 02:05:09 +02:00
Linus Torvalds 0ce5c79f38 power supply and reset changes for the v4.14 series
* New chip/feature support
  - bq27xxx: support updating battery config from DT
  - bq24190: support loading battery charge info from DT
  - LTC2941: add LTC2942/LTC2944 support
  - max17042: add ACPI support
  - max1721x: new driver
 * Misc
  - Move bq27xxx w1 driver from w1 into power-supply subsystem
  - Introduce power_supply_set_input_current_limit_from_supplier
  - constify stuff
  - some minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlmxSSQACgkQ2O7X88g7
 +ppf2xAAliDRdNPuxpKu69syiX+iNPaPHTqRXd41sAJlEX2IYv/avcoNFcGySplR
 gJYdlbx2Qd86aBaMf92h4tGihk2iNa87It9xkA+JgO3wNoKiZ+b5lk///IDk8aDF
 8sknSTXJtGYse0jwBRKTT4cL1ZW/g10heUxPr8AiX8nL4QhMf0TIxXawWQteAZDE
 dDz/UEAqbINooD5HtP716Z0e3U6FyWTqFc6UzuR+n8c6wC6n/JA6h91ASAHUmExT
 aH1JuQyrmucBp8cLhP01ThSkoIdGbcZM7nJ3WQBlfDricFJXa/yThug/mHvjztJX
 3U1UOZBqsb/LL9Dh5hl/D3+i+7qI29KCyUZiYUrwoiSjxM/AtOB2t4cAWmU7+PnJ
 V3coYC1s2DlwYcLIUiyE2zmVWIDcOuuOJhQjCdpUBTPvz83nQ0v5oXMn7VnQmWlO
 8Z/IRWnW90v2D2iHmSPAwFG3ATfH0pAP8G/4Wrudti+ymSxAhXaLqQcj3HHjKjvI
 3CEGOPAN9Opuof7SfkIVuoOjPzazx5GUpAZQKi8LS87KRdXN4ics3vbNB6VBDR50
 FzVhJJZBTeAOJCDogInuu4gDa0L5Ikfdkhqc+nvNfcdsE2k3H8Nb//+UPiPnfgEA
 mEFyp9gaY08/3ylDEHxp3N/W7POrL4QelTjv0dvdKW70i7KtWpA=
 =iy5f
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...
2017-09-09 14:44:39 -07:00
Linus Torvalds 968c61f7da - New Drivers
- RK805 Power Management IC (PMIC)
    - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
    - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
 
  - New Device Support
    - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
    - Add support for X-Powers AXP806 to axp20x
    - Add support for X-Powers AXP813 to axp20x
    - Add support for Intel Sunrise Point LPSS to intel-lpss-pci
 
  - New Functionality
    - Amend API to provide register layout; atmel-smc
 
 - Fix-ups
    - DT re-work; omap, nokia
    - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
    - Fix chip ID formatting issue(s); rk808
    - Optionally register touchscreen devices; da9052-core
    - Documentation improvements; twl-core
    - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
    - Drop unnecessary static declaration; max8925-i2c
    - Kconfig changes (missing deps and remove module support)
    - Slim down oversized licence statement; hi6421-pmic-core
    - Use managed resources (devm_*); lp87565
    - Supply proper error checking/handling; t7l66xb
 
  - Bug Fixes
    - Fix counter duplication issue; da9052-core
    - Fix potential NULL deference issue; max8998
    - Leave SPI-NOR write-protection bit alone; lpc_ich
    - Ensure device is put into reset during suspend; intel-lpss
    - Correct register offset variable size; omap-usb-tll
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZsP0YAAoJEFGvii+H/HdhrJUP/RB6BTCDMf3WCi5e6PN8IFST
 JspCcf4bwKVc5lDvORQglVRfBhKY/uSr7F9xlfXtHx8V60ZNo1VOQcyJBTKIz+IJ
 +FQQgM3lEMKIn3QCcu9lKSRomJx55YDnF5SrZ8FzkC8pGLrCYEru5HfqFqOTfPqq
 OH2wZSqiX4H/jYdfVzp3bgqXkDff/nSEGTeFankFkv4wRvLGRxlpVuqkRJcvEJA3
 d8N9MoBBxkZAtAn2j1H5cHyPx5NrBEM2gkXpDfdd+kJNnFzjL72xsXd6rp+N6rcm
 d20eL+1fyJVyvGhGiDOhFwqRAZEqvjPSI4k5kQdRk8IdioGgbmaI74eUbv+rGAKp
 P9QdR7n1ctYyVgwnawIwKTPMzdZo5+9kdagCtu8IBVT02zQqVSDKZM7dAYo2rJuF
 yw24jONcwHFrKA25n1pLJmMbJGHq83kqqw3q5kl17nyArvOOcyspCTODIL9iskhZ
 L0IoIMwQYEj/pnI+iuXl9bJ30v2FIJxyCzUR2u7OJnrH7G27rsoOL0WDqxbp3Dp9
 7tD+6OzMiyIEDxtcd74kjg7g9p5HCmcY3FiDWirmQuZIR3abSET4ap+cTYPdFqVZ
 widS5Pi4PP40ZFN6+4lbBHLlh6MgpHpig9M03kFAr1SyZnH8nf4TnCsFV+wYPyTb
 LR3cKpFeTY8IyFWaLoSg
 =TKIm
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...
2017-09-07 13:51:13 -07:00
Linus Torvalds 439644096c Power management updates for v4.14-rc1
- Drop the P-state selection algorithm based on a PID controller
    from intel_pstate and make it use the same P-state selection
    method (based on the CPU load) for all types of systems in the
    active mode (Rafael Wysocki, Srinivas Pandruvada).
 
  - Rework the cpufreq core and governors to make it possible to
    take cross-CPU utilization updates into account and modify the
    schedutil governor to actually do so (Viresh Kumar).
 
  - Clean up the handling of transition latency information in the
    cpufreq core and untangle it from the information on which drivers
    cannot do dynamic frequency switching (Viresh Kumar).
 
  - Add support for new SoCs (MT2701/MT7623 and MT7622) to the
    mediatek cpufreq driver and update its DT bindings (Sean Wang).
 
  - Modify the cpufreq dt-platdev driver to autimatically create
    cpufreq devices for the new (v2) Operating Performance Points
    (OPP) DT bindings and update its whitelist of supported systems
    (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
    Finley Xiao).
 
  - Add support for Ux500 to the cpufreq-dt driver and drop the
    obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
 
  - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
    Nguyen).
 
  - Fix and clean up assorted issues in the cpufreq drivers and core
    (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
    Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
 
  - Update the IO-wait boost handling in the schedutil governor to
    make it less aggressive (Joel Fernandes).
 
  - Rework system suspend diagnostics to make it print fewer messages
    to the kernel log by default, add a sysfs knob to allow more
    suspend-related messages to be printed and add Low Power S0 Idle
    constraints checks to the ACPI suspend-to-idle code (Rafael
    Wysocki, Srinivas Pandruvada).
 
  - Prefer suspend-to-idle over S3 on ACPI-based systems with the
    ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
    interface present in the ACPI tables (Rafael Wysocki).
 
  - Update documentation related to system sleep and rename a number
    of items in the code to make it cleare that they are related to
    suspend-to-idle (Rafael Wysocki).
 
  - Export a variable allowing device drivers to check the target
    system sleep state from the core system suspend code (Florian
    Fainelli).
 
  - Clean up the cpuidle subsystem to handle the polling state on
    x86 in a more straightforward way and to use %pOF instead of
    full_name (Rafael Wysocki, Rob Herring).
 
  - Update the devfreq framework to fix and clean up a few minor
    issues (Chanwoo Choi, Rob Herring).
 
  - Extend diagnostics in the generic power domains (genpd) framework
    and clean it up slightly (Thara Gopinath, Rob Herring).
 
  - Fix and clean up a couple of issues in the operating performance
    points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
 
  - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
    (AVS) driver (David Wu).
 
  - Fix the usage of notifiers in CPU power management on some
    platforms (Alex Shi).
 
  - Update the pm-graph system suspend/hibernation and boot profiling
    utility (Todd Brandt).
 
  - Make it possible to run the cpupower utility without CPU0 (Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcDJAAoJEILEb/54YlRx9FUQAIUKvWBAARc61ZIZXjbqZF1v
 aEMOBuksFns0CMekdptSic6n4wc81E/XYMS8yDhOOMpyDzfAZsTWjmu+gKwN7w3l
 E/yf/NVlhob9JZ7MqGgqD4EUFfFIaKBXPlWFdDi2rdCUXE2L8xJ7rla8i7zyZlc5
 pYHfAppBbF4qUcEY4OoOVOOGRZCfMdiLXj0iZOhMX8Y6yLBRk/AjnVADYsF33hoj
 gBEfomU+H0K5V8nQEp0ZFKDArPwL+oElHQj6i+nxBpGfPM5evvLXhHOyR6AsldJ5
 J4YI1kMuQNSCmvHMqOTxTYyJf8Jcf3Fj4wcjwaVMVGceY1lz6McAKknnFnCqCvz+
 mskn84gFCBCM8EoJDqRf0b9MQHcuRyQKM+yw4tjnR9r8yd32erb85ZWFHcPWYhCT
 fZatNOwFFv2MU+2vo5J3yeUNSWIKT+uBjy+tKPbrDkUwpKZVRj3Oj+hP3Mq9NE8U
 YBqltsj7tmrdA634zI8C7jfS6wF221S0fId/iPszwmPJaVn/lq8Ror7pWL5YI8U7
 SCJFjiqDiGmAcQEkuWwFAQnscZkyHpO+Y3A+jfXl/izoaZETaI5+ceIHBaocm3+5
 XrOOpHS3ik8EHf9ji0KFCKZ/pYDwllday3cBQPWo3sMIzpQ2lrjbqdnE1cVnBrld
 OtHZAeD/jLUXuY6XW2jN
 =mAiV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time (again) cpufreq gets the majority of changes which mostly
  are driver updates (including a major consolidation of intel_pstate),
  some schedutil governor modifications and core cleanups.

  There also are some changes in the system suspend area, mostly related
  to diagnostics and debug messages plus some renames of things related
  to suspend-to-idle. One major change here is that suspend-to-idle is
  now going to be preferred over S3 on systems where the ACPI tables
  indicate to do so and provide requsite support (the Low Power Idle S0
  _DSM in particular). The system sleep documentation and the tools
  related to it are updated too.

  The rest is a few cpuidle changes (nothing major), devfreq updates,
  generic power domains (genpd) framework updates and a few assorted
  modifications elsewhere.

  Specifics:

   - Drop the P-state selection algorithm based on a PID controller from
     intel_pstate and make it use the same P-state selection method
     (based on the CPU load) for all types of systems in the active mode
     (Rafael Wysocki, Srinivas Pandruvada).

   - Rework the cpufreq core and governors to make it possible to take
     cross-CPU utilization updates into account and modify the schedutil
     governor to actually do so (Viresh Kumar).

   - Clean up the handling of transition latency information in the
     cpufreq core and untangle it from the information on which drivers
     cannot do dynamic frequency switching (Viresh Kumar).

   - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
     cpufreq driver and update its DT bindings (Sean Wang).

   - Modify the cpufreq dt-platdev driver to autimatically create
     cpufreq devices for the new (v2) Operating Performance Points (OPP)
     DT bindings and update its whitelist of supported systems (Viresh
     Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
     Xiao).

   - Add support for Ux500 to the cpufreq-dt driver and drop the
     obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).

   - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
     Nguyen).

   - Fix and clean up assorted issues in the cpufreq drivers and core
     (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
     Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).

   - Update the IO-wait boost handling in the schedutil governor to make
     it less aggressive (Joel Fernandes).

   - Rework system suspend diagnostics to make it print fewer messages
     to the kernel log by default, add a sysfs knob to allow more
     suspend-related messages to be printed and add Low Power S0 Idle
     constraints checks to the ACPI suspend-to-idle code (Rafael
     Wysocki, Srinivas Pandruvada).

   - Prefer suspend-to-idle over S3 on ACPI-based systems with the
     ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
     interface present in the ACPI tables (Rafael Wysocki).

   - Update documentation related to system sleep and rename a number of
     items in the code to make it cleare that they are related to
     suspend-to-idle (Rafael Wysocki).

   - Export a variable allowing device drivers to check the target
     system sleep state from the core system suspend code (Florian
     Fainelli).

   - Clean up the cpuidle subsystem to handle the polling state on x86
     in a more straightforward way and to use %pOF instead of full_name
     (Rafael Wysocki, Rob Herring).

   - Update the devfreq framework to fix and clean up a few minor issues
     (Chanwoo Choi, Rob Herring).

   - Extend diagnostics in the generic power domains (genpd) framework
     and clean it up slightly (Thara Gopinath, Rob Herring).

   - Fix and clean up a couple of issues in the operating performance
     points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).

   - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
     (AVS) driver (David Wu).

   - Fix the usage of notifiers in CPU power management on some
     platforms (Alex Shi).

   - Update the pm-graph system suspend/hibernation and boot profiling
     utility (Todd Brandt).

   - Make it possible to run the cpupower utility without CPU0 (Prarit
     Bhargava)"

* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
  cpuidle: Make drivers initialize polling state
  cpuidle: Move polling state initialization code to separate file
  cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  PM: docs: Delete the obsolete states.txt document
  PM: docs: Describe high-level PM strategies and sleep states
  PM / devfreq: Fix memory leak when fail to register device
  PM / devfreq: Add dependency on PM_OPP
  PM / devfreq: Move private devfreq_update_stats() into devfreq
  PM / devfreq: Convert to using %pOF instead of full_name
  PM / AVS: rockchip-io: add io selectors and supplies for RV1108
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpuidle: Convert to using %pOF instead of full_name
  cpufreq: Convert to using %pOF instead of full_name
  PM / Domains: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  ...
2017-09-05 12:19:08 -07:00
Wolfram Sang a205425658 mfd: twl: Move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-04 14:41:02 +01:00
H. Nikolaus Schaller 5d01fd38a3 power: supply: bq27xxx: enable writing capacity values for bq27421
Tested on Pyra prototype with bq27421.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-31 10:25:24 +02:00
Hans de Goede 18f8e6f695 power: supply: bq24190_charger: Get input_current_limit from our supplier
On some devices the USB Type-C port power (USB PD 2.0) negotiation is
done by a separate port-controller IC, while the current limit is
controlled through another (charger) IC.

It has been decided to model this by modelling the external Type-C
power brick (adapter/charger) as a power-supply class device which
supplies the charger-IC, with its voltage-now and current-max representing
the negotiated voltage and max current draw.

This commit adds support for this to the bq24190_charger driver by adding
an external_power_changed callback and calling
power_supply_set_input_current_limit_from_supplier from this callback.
This callback will only get called if the bq24190 has a parent-supply.

Note this replaces the functionality to get the current-limit from an
extcon device, which will be removed in a follow-up commit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-30 18:02:02 +02:00
Hans de Goede 66b6bef2c4 power: supply: bq24190_charger: Export 5V boost converter as regulator
Register the 5V boost converter as a regulator named "usb_otg_vbus".

This commit also adds support for bq24190_platform_data, through which
non device-tree platforms can pass the regulator_init_data (containing
mappings for the consumer amongst other things).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-30 17:31:51 +02:00
Liam Breck 14e1a131b5 power: supply: bq24190_charger: Add power_supply_battery_info support
Set pre-charge and charge-term current, obtained from power_supply_battery_info.
Add sysfs attributes precharge_current & charge_term_current.

Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 23:08:39 +02:00
Liam Breck 8412a5bea7 power: supply: bq24190_charger: Add property system-minimum-microvolt
Set minimum system voltage limit obtained from device property.

Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 23:08:39 +02:00
Liam Breck a4c7590b8d power: supply: bq24190_charger: Enable devicetree config
Add get_config(). Rename set_mode_host() to set_config().
Call get_config() and hw_init() after power_supply_register().
No functional changes.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 23:08:38 +02:00
Liam Breck 1059361fb6 power: supply: bq27xxx: Remove duplicate chip data arrays
BQ2751X & BQ27510G3 have identical regs & props.
BQ2750X & BQ27510G3 have identical props.
BQ27500 & BQ27510G1 & BQ27510G2 have identical regs & props.
BQ27500 & BQ27520G2 have identical props.
Remove the duplicate arrays.

No functional changes to the driver.

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 23:08:38 +02:00
Liam Breck 05045379b2 power: supply: bq27xxx: Enable data memory update for certain chips
Support data memory update on BQ27425. Parameters from TI datasheets are also
provided for BQ27500, 545, 421, 441, 621; however these are commented out,
as they are not tested.

Add BQ27XXX_O_CFGUP & _O_RAM for use in bq27xxx_chip_data[n].opts
and by data memory update functions.

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:44:27 +02:00
Liam Breck 3a731c6414 power: supply: bq27xxx: Add chip IDs for previously shadowed chips
For the existing features, these chips act like others already ID'd,
so they had false but functional IDs. We will be adding features
which require correct IDs, so the following IDs are added:
BQ2752X, 531, 542, 546, 742, 425, 441, 621

Chip-specific features are now tracked by BQ27XXX_O_* flags in di->opts.

No functional changes to the driver.

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:37:35 +02:00
Liam Breck 9aade6d8f9 power: supply: bq27xxx: Create single chip data table
To support new features which require different data for each chip, we
unify the bq27xxx_regs and bq27xxx_battery_props tables into a single one.

No functional changes to the driver.

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:30:34 +02:00
Liam Breck 64b46b7b87 power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
bq24192i was previously only in ID table, so add it to DT table.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:28:58 +02:00
Hans de Goede 74229f9384 power: supply: bq24190_charger: Add input_current_limit property
Export the input current limit of the charger as a
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT property on the charger
power_supply class device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:26:59 +02:00
Hans de Goede c3142dd8be power: supply: Add power_supply_set_input_current_limit_from_supplier helper
On some devices the USB Type-C port power (USB PD 2.0) negotiation is
done by a separate port-controller IC, while the current limit is
controlled through another (charger) IC.

It has been decided to model this by modelling the external Type-C
power brick (adapter/charger) as a power-supply class device which
supplies the charger-IC, with its voltage-now and current-max representing
the negotiated voltage and max current draw.

This commit adds a power_supply_set_input_current_limit_from_supplier
helper function which charger power-supply drivers can call to get
the max-current from their supplier and have this applied
through their set_property call-back to their input-current-limit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:24:52 +02:00
Hans de Goede 4f1e0cb788 power: supply: max17042_battery: Fix compiler warning
Fix drivers/power/supply/max17042_battery.c:1059:6:
warning: 'acpi_id' may be used uninitialized in this function.

No idea why my gcc version did not catch this.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29 12:04:14 +02:00
Markus Elfring 1e743997fb power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
Omit extra messages for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28 18:50:39 +02:00
Bhumika Goyal c023b90699 power: supply: make device_attribute const
Make these const as they are only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28 18:48:44 +02:00
Hans de Goede a865a15556 power: supply: max17042_battery: Fix ACPI interrupt issues
On some x86/ACPI boards the DSDT defines an ACPI event handler for
the max17047 IRQ, this causes several problems:

1) We need to share the IRQ to avoid an error getting it

2) Even of we are willing to share, we may fail to share because some
   DSDTs claim it exclusivly

3) If we are unable to share the IRQ, or the IRQ is only listed as an
   ACPI event source and not in the max1704 firmware node, then the
   charge threshold IRQ (which is used to give an IRQ every 1 percent
   charge change) becomes a problem, the ACPI event handler will not
   update this to the next 1 percent threshold, so the IRQ keeps firing
   and we get an IRQ storm pegging 1 CPU core.

   This happens despite the max17042 driver not setting the charge
   threshold because Windows uses it and leaves it set on reboot.

   So if we are unable to get the IRQ we need to reprogram the
   charge threshold to its disabled setting.

This commit fixes al of the above, while at it it also makes the error
msg when being unable to get the IRQ consistent with other messages.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28 18:19:07 +02:00
Hans de Goede e21162029a power: supply: max17042_battery: Add support for ACPI enumeration
Some x86 devices enumerate a max17047 fuel-gauge through a MAX17047
ACPI firmware-node, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28 18:19:07 +02:00
David Wu 9d913e4343 PM / AVS: rockchip-io: add io selectors and supplies for RV1108
This adds the necessary data for handling io voltage domains on the RV1108.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25 01:45:23 +02:00
Baolin Wang 626b6cd5f5 power: wm831x_power: Support USB charger current limit management
Integrate with the newly added USB charger interface to limit the current
we draw from the USB input based on the input device configuration
identified by the USB stack, allowing us to charge more quickly from high
current inputs without drawing more current than specified from others.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-15 15:05:01 +03:00
Colin Ian King 810e006a82 power: supply: lp8788: Make several arrays static const * const
Don't populate various read only arrays on the stack but make them
static const, making the object code smaller and saves 148 bytes
overall:

Before:
   text    data     bss     dec     hex filename
  11940    4496      64   16500    4074 lp8788-charger.o

After:
   text    data     bss     dec     hex filename
  11472    4816      64   16352    3fe0 lp8788-charger.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-12 13:58:14 -04:00
Christophe JAILLET 18a89d5c7c power: supply: charger-manager: Slighly simplify code
Use 'sizeof(*var)' instead of the equivalent 'sizeof(data structure type)'
because it is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11 18:54:35 +02:00
Christophe JAILLET 0299484e4d power: supply: charger-manager: Fix a comment
Update a comment which is no more up to date since commit
2ed9e9b653.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11 18:53:59 +02:00
Christophe JAILLET 096fc160b7 power: supply: charger-manager: Fix a NULL pointer dereference in 'charger_manager_probe()'
'devm_kzalloc()' can return NULL. Return -ENOMEM in this case in order to
avoid a NULL pointer dereference later on.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11 18:53:18 +02:00
Hans de Goede 46cecd130d power: supply: Fix power_supply_am_i_supplied to return -ENODEV when apropriate
Commit 2848e039c5 ("power: supply: Make power_supply_am_i_supplied return
-ENODEV if there are no suppliers") was supposed to make
power_supply_am_i_supplied() return -ENODEV when there are no supplies
which supply the supply passed to it.

But instead it will only return -ENODEV when there are no supplies at
all as data->count++; is incremented on every call of the iterator, rather
then only when __power_supply_is_supplied_by returns true. This commit
fixes this.

Fixes: 2848e039c5 ("power: supply: Make power_supply_am_i_supplied ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-09 17:56:46 +02:00
Bhumika Goyal 16ac345b15 power: supply: add const to bin_attribute structures
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file or
device_{remove/create}_bin_file. The corresponding parameters
passed are of type const, so declare the structures to be const.

Done using Coccinelle:

@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};

@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)

@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p

@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};

Same script was modified for device_{create/remove}_bin_file functions.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-09 17:42:56 +02:00
Andrew F. Davis 67bd22c09a power: supply: bq27xxx: move platform driver code into bq27xxx_battery_hdq.c
When the BQ27xxx driver was originally written the w1 subsystem only
allowed device drivers for w1 attached devices to live in the w1
subsystem. Kernel driver subsystems expect that the driver for a device
live in the directory of the subsystem for which it implements
functionality, not in the directory of the bus that it is attached. To
work around this, the BQ27xxx driver was implemented as a platform device
driver and the interface driver would instantiate this device from within
the w1 directory, then pass a w1 read callback as platform data.

As we can now have the w1 interface driver in the power/supply directory
(like we do already with the i2c interface driver) we can remove this
middle-layer platform driver.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 15:31:21 +02:00
Sebastian Reichel c8143b7288 Merge branch 'psy-w1-for-v4.14-immutable' into for-next
Merge immutable branch moving bq27000 driver from w1 subsystem
into power-supply subsystem.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 15:18:27 +02:00
Andrew F. Davis 55a9db6791 power: supply: move HDQ interface for bq27xxx from w1 to power/supply
The HDQ interface driver should be in this folder just like the I2C
interface driver. Move this driver out of drivers/w1/slave and into
drivers/power/supply.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 15:17:39 +02:00
Dragos Bogdan 17825ff6ec power: supply: ltc2941-battery-gauge: Add LTC2944 support
LTC2944 is compatible with LTC2943, but uses different
voltage and current computing constants.

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Dragos Bogdan <dragos.bogdan@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 12:13:04 +02:00
Ladislav Michl a65df832f9 power: supply: ltc2941-battery-gauge: Add LTC2942 support
LTC2942 is pin compatible with LTC2941 providing additional
informations about battery voltage and temperature. It can
be runtime detected using bit A7 in the Status register.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dragos Bogdan <dragos.bogdan@analog.com>
Tested-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 12:10:52 +02:00
Ladislav Michl 63e67c5769 power: supply: ltc2941-battery-gauge: Prepare for LTC2942 and LTC2944
In order to support LTC2942 which has temperature registers
at different offsets than LTC2943 use following register naming
scheme (prefixes):
- LTC294X_ common registers
- LTC2942_ chips specific registers
- LTC2943_ specific registers

LTC2944 is compatible with LTC2943 but uses different constants
to compute voltage and current, so replace num_regs misused
for device indentification with real device id to discriminate
between those two.

There are no functional changes.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Dragos Bogdan <dragos.bogdan@analog.com>
Tested-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 12:03:23 +02:00
Phil Reid adcf04c9f8 power: supply: sbs-battery: Add delay when changing capacity mode bit
At least with the Inspired Energy compatible batteries a delay is required
after setting the capacity mode bit from amp to watts or the reverse.
Setting the bit and then immediately pooling the status register results
in an unknown error being returned in the register. Add the delay results
in and ok status being return. This was also seen when reading the charge
and energy registers where the wrong value was returned for the requested
mode.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Tested-by: Michael Heinemann <committed@heine.so>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 11:30:28 +02:00
Phil Reid b70f0a2896 power: supply: sbs-battery: sort includes
Sort the header includes prior to adding to the list.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 11:23:39 +02:00
Phil Reid 6d1eebc99b power: supply: sbs-battery: Remove FSF mailing address from comments
checkpatch issued an error in having the FSF address in the comment.
As address may change and Linux already includes a copy.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25 11:23:16 +02:00
Sebastian Reichel d4e2385c69 Merge branch 'fixes' into for-next
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 20:53:15 +02:00
Alex A. Mihaylov 10e48b7d73 power: supply: Add support for MAX1721x standalone fuel gauge
The MAX17211 monitor a single cell pack. The MAX17215 monitor and
balance a 2S or 3S pack or monitor a multiple-series cell pack.
Both device use 1-Wire interfce.

Signed-off-by: Alex A. Mihaylov <minimumlaw@rambler.ru>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:09:34 +02:00
Arvind Yadav 980092efd4 power: supply: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2673	    400	      0	   3073	    c01	power/supply/pcf50633-charger.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2737	    336	      0	   3073	    bed	power/supply/pcf50633-charger.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:09:32 +02:00
Rob Herring 2f04cd2a9b power: reset: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:09:31 +02:00
Sergei Shtylyov 648b8eba20 power: supply: act8945a_charger: fix of_irq_get() error check
of_irq_get() may return any negative error number as well as 0 on failure,
while the driver only checks for -EPROBE_DEFER, blithely continuing with
the call to devm_request_irq() -- that function expects *unsigned int*,
so would probably fail anyway when a large IRQ number resulting from a
conversion of a negative error number is passed to it... This, however,
is incorrect behavior -- error number is not IRQ number.

Check for 'irq <= 0' instead and return -ENXIO from probe if of_irq_get()
returned 0.

Fixes: a09209acd6 ("power: supply: act8945a_charger: Add status change update support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:09:00 +02:00
Arnd Bergmann 8b35bf5927 power: supply: cpcap-charger: add OMAP_USB2 dependency
When CONFIG_OMAP_USB2 is set to 'm' and the charger driver is built-in,
we get this link failure:

drivers/power/supply/cpcap-charger.o: In function `cpcap_charger_probe':
cpcap-charger.c:(.text+0x48c): undefined reference to `omap_usb2_set_comparator'
drivers/power/supply/cpcap-charger.o: In function `cpcap_charger_remove':
cpcap-charger.c:(.text+0x774): undefined reference to `omap_usb2_set_comparator'

This adds a dependency to prevent that problem, while still allowing
compile-testing with the OMAP_USB2 driver completely disabled.

Fixes: 0c9888e3c1 ("power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:08:59 +02:00
Michael Heinemann 0188155a23 power: supply: sbs-battery: correct capacity mode selection bits
The capacity mode bit is bit 15. Currently it is written as
default initialized enum and never shifted. This leads to
a behaviour where the BATTERY_MODE is not correctly
recognized and set again.

This commit initializes the enum accordingly.

Signed-off-by: Michael Heinemann <committed@heine.so>
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-24 14:08:52 +02:00
Linus Torvalds dc087d1ef1 power supply and reset changes for the v4.13 series (part 2)
* two fixes for twl4030-charger
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAllmp2IACgkQ2O7X88g7
 +pqgXRAAg9kBJUYoTmLOg67L8HpnUuiPuy4Mp0oceQQYbDSRTaaQKN7d4m3+6k3H
 SV0Z84CH3GfgZDaSCAxPT84/gsiFsBSxKvvQ/X9DxitdULj5KehS9IYok0p+83RU
 BL6St1gZcJiM2GAip81+IMn9MVGyvr6hxY0sme6nsvXRg8BT7aSk8eC/2pESuoo/
 MGpgPCJrYPtPNPDYTGrD1rgW+0zWxkBITOvjvRAXm3fvdN42yFf4FfhK5XvjjQwA
 /wO3TgGOVa+ibUMoPnnlqIvZq7SqyeiPsE+/Et4/7/EKpVmuNelZtouKS2T+gy+J
 lxLIMxlB+AIY2gQDVczHrewIQG342hVCwQWAJkp9ifC/a76iAK7mmdLPXZqEs9AT
 qvaaL+sUxmYgPslXj+L6h78NRjRordYA5z0d6CLBzKDln4BNsGq3EvAEYKlhIL+r
 V5lJu+wPv75Y8HEsfcrLmLztojxjjjdqiSjO828ZR1Y+qEK0qJMEoSfGPdIFKzd5
 0it1eqceye4VOBQ/1au+aPkTdO48/4nfAlPwxtY7UzKtLfulLhUJbWxbFXVrvLWs
 vSZ9Tp8W6QdulGSseBu6BtT2ogmHbNEjl2e0CWpScj6hZwCvTXZdrnELJ/HpNu/f
 j5Ul6BhCM5EJMux9ahP67YH9CyGi60x1P9vItkFp75kjU3tOU6Y=
 =shuZ
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from  Reichel:
 "I have two more fixes for the power-supply subsystem:

   - two fixes for twl4030-charger"

* tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: twl4030-charger: add deferred probing for phy and iio
  power: supply: twl4030-charger: move irq allocation to just before irqs are enabled
2017-07-13 11:47:59 -07:00
Linus Torvalds a897a10141 power supply and reset changes for the v4.13 series
* New drivers
  - Linear ltc3651 charger driver
  - Motorola CPCAP battery fuel-gauge driver
 * New chip/feature support
  - bq27xxx: prepare for chip data setup
  - axp20x_battery: support max charge current setup
 * New core features
  - add Apple Brick ID type
  - support "supplied-from" device property for generic ACPI/pdata support
  - support strings for sysfs properties representing enums
  - introduce battery-info (backend is DT only for now)
  - provide reboot-mode header globally
 * Misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAllbV3gACgkQ2O7X88g7
 +pq5bw/8CfLQpgTgMzsehhb1EW03Bj5X7tmJKyb5w19Zmo1gwa1JMu9O30p4tAJa
 pid3LsQDBkcVCSn3QWFtVPe37Q3C1YgiatvdmPiaIbk5l62WTdPrBxKzFJCqPvke
 1Cb8bSpRi+EQ73DFVNuMZjAHl/eNwsS1/hiDQNBOPBnv3bZDtoSmYS3+7f6alSpD
 yFLdqSUr6RbP5gxesjaws5COgWMtxBzu8nDOtPaeT52Uxr6QW3T1RPmelj3paPHm
 kkd2z18q6k5vqHmMSoisNxaguYyKSvfTZBL/pwkC3MgtcZWcOBLchCg1vwrmTDkv
 sBzpVtgVNHTE/T0pEu4cbYmMdI6qsDiNeM0GxDAe/iOSKqrRFCEWWNbitBRTKthK
 XWd++er+wRJ6P9wx6t74Bb1AmneHWXAyB/hY8ma9LKpZpAV1NwCyJmAzWFCVCoz5
 eG9ZcakW/VXF0ROjD3IxRUMYZOrOuomeZEyOxxELls4y6MJuLEafn7Kyh0yBzx4D
 bxbvmHxhHxJPjnPvloJjD1vi/QVbsG1U54EJqLZlcc+wlYj/I2kNMu8emiu6khUi
 q7kEvRSY5t0M9J44MyNaDYutt69OgXeuT6MDNkAY24l6lQsv8MQVeKwz5Cwk/Noq
 hfpIjBwcibjvKWbkDAuF/wnVIjwYdXWLVRBU6Jop5GQK9lNZN6A=
 =SsiM
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - Linear ltc3651 charger driver
   - Motorola CPCAP battery fuel-gauge driver

  New chip/feature support:
   - bq27xxx: prepare for chip data setup
   - axp20x_battery: support max charge current setup

  New core features:
   - add Apple Brick ID type
   - support "supplied-from" device property for generic ACPI/pdata support
   - support strings for sysfs properties representing enums
   - introduce battery-info (backend is DT only for now)
   - provide reboot-mode header globally

  .. and misc fixes"

* tag 'for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE
  power: supply: sbs-battery: Prevent CAPACITY_MODE races
  power: supply: bq24735: remove incorrect le16_to_cpu calls
  power: supply: sbs-battery: remove incorrect le16_to_cpu calls
  power: supply: cpcap-charger: Add missing power_supply_config
  power: supply: twl4030-charger: move allocation of iio channel to the beginning
  power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path
  power: supply: core: constify psy_tcd_ops.
  dt-bindings: power: supply: cpcap-battery: Add power-supplies property
  dt-bindings: power: supply: move max8903-charger.txt to proper location
  dt-bindings: power: supply: move maxim,max14656.txt to proper location
  power: supply: twl4030_charger: Use sysfs_match_string() helper
  power: reset: reboot-mode: Make include file global
  power: supply: axp20x_battery: add DT support for battery max constant charge current
  power: supply: axp20x_battery: add support for DT battery
  power: supply: bq27xxx: Add power_supply_battery_info support
  power: supply: bq27xxx: Add chip data memory read/write support
  power: supply: bq27xxx: Add bulk transfer bus methods
  dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation
  power: supply: core: Add power_supply_prop_precharge
  ...
2017-07-04 14:25:14 -07:00
Linus Torvalds 408c9861c6 Power management updates for v4.13-rc1
- Rework suspend-to-idle to allow it to take wakeup events signaled
    by the EC into account on ACPI-based platforms in order to properly
    support power button wakeup from suspend-to-idle on recent Dell
    laptops (Rafael Wysocki).
 
    That includes the core suspend-to-idle code rework, support for
    the Low Power S0 _DSM interface, and support for the ACPI INT0002
    Virtual GPIO device from Hans de Goede (required for USB keyboard
    wakeup from suspend-to-idle to work on some machines).
 
  - Stop trying to export the current CPU frequency via /proc/cpuinfo
    on x86 as that is inaccurate and confusing (Len Brown).
 
  - Rework the way in which the current CPU frequency is exported by
    the kernel (over the cpufreq sysfs interface) on x86 systems with
    the APERF and MPERF registers by always using values read from
    these registers, when available, to compute the current frequency
    regardless of which cpufreq driver is in use (Len Brown).
 
  - Rework the PCI/ACPI device wakeup infrastructure to remove the
    questionable and artificial distinction between "devices that
    can wake up the system from sleep states" and "devices that can
    generate wakeup signals in the working state" from it, which
    allows the code to be simplified quite a bit (Rafael Wysocki).
 
  - Fix the wakeup IRQ framework by making it use SRCU instead of
    RCU which doesn't allow sleeping in the read-side critical
    sections, but which in turn is expected to be allowed by the
    IRQ bus locking infrastructure (Thomas Gleixner).
 
  - Modify some computations in the intel_pstate driver to avoid
    rounding errors resulting from them (Srinivas Pandruvada).
 
  - Reduce the overhead of the intel_pstate driver in the HWP
    (hardware-managed P-states) mode and when the "performance"
    P-state selection algorithm is in use by making it avoid
    registering scheduler callbacks in those cases (Len Brown).
 
  - Rework the energy_performance_preference sysfs knob in
    intel_pstate by changing the values that correspond to
    different symbolic hint names used by it (Len Brown).
 
  - Make it possible to use more than one cpuidle driver at the same
    time on ARM (Daniel Lezcano).
 
  - Make it possible to prevent the cpuidle menu governor from using
    the 0 state by disabling it via sysfs (Nicholas Piggin).
 
  - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1
    on AMD systems (Yazen Ghannam).
 
  - Make the CPPC cpufreq driver take the lowest nonlinear performance
    information into account (Prashanth Prakash).
 
  - Add support for hi3660 to the cpufreq-dt driver, fix the
    imx6q driver and clean up the sfi, exynos5440 and intel_pstate
    drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila,
    Rafael Wysocki, Tao Wang).
 
  - Fix a few minor issues in the generic power domains (genpd)
    framework and clean it up somewhat (Krzysztof Kozlowski,
    Mikko Perttunen, Viresh Kumar).
 
  - Fix a couple of minor issues in the operating performance points
    (OPP) framework and clean it up somewhat (Viresh Kumar).
 
  - Fix a CONFIG dependency in the hibernation core and clean it up
    slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
 
  - Add rk3228 support to the rockchip-io adaptive voltage scaling
    (AVS) driver (David Wu).
 
  - Fix an incorrect bit shift operation in the RAPL power capping
    driver (Adam Lessnau).
 
  - Add support for the EPP field in the HWP (hardware managed
    P-states) control register, HWP.EPP, to the x86_energy_perf_policy
    tool and update msr-index.h with HWP.EPP values (Len Brown).
 
  - Fix some minor issues in the turbostat tool (Len Brown).
 
  - Add support for AMD family 0x17 CPUs to the cpupower tool and fix
    a minor issue in it (Sherry Hurwitz).
 
  - Assorted cleanups, mostly related to the constification of some
    data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
    Kozlowski).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZWrICAAoJEILEb/54YlRxZYMQAIRhfbyDxKq+ByvSilUS8kTA
 AItwJ8FFzykhiwN75Cqabg4rAGyWma7IRs1vzU7zeC1aEQIn+bTQtvk+utZNI+g2
 ANFlDha20q/sXsP/CDMMTIAdW9tSOC0TOvFI9s2V2Y8dJZhoekO4ctx34FAfUS5d
 Ao6rwSAWCMsCXcGaTAlqTA+TEJmBG7u6Iq6hq6ngltoFwOv3mWWBVn52VVaJ7SMp
 9/IPbbLGMFAedrgEBRGCR+MME1xZZpvcZIJaTt1Mgn7Cx3cJaysIUAvqY/SsvFGq
 5FcUTcF2qpK3+AGawiAxZIjvOBsGRtIwqKinNIzYWs/NjiIdzmgVAmTeuPtTqp+5
 HFehUdtkFcnuDnLqSNzAaZUa7tw84cJkwnbVMnesx0MkG6rZ1SeL22E2Sabpcdsh
 3Yo1ThzJSxi59DhiiE92EQnNCEjmCldRy+8q5Ag035muxl6EJYvuNBMnZv/BMCUn
 ltSNOrmps1DlN+Col8ORIeNzQ1YjYzWMqKAYzSbyccm4ug/iSHx0/DuESmQ4GTlF
 YCwkmqyWiHrBwpl51jc+4a7SGlMmKRqU+MJes0CjagaaqoUAb8qeBOpzEJ0yNwjZ
 wtI41l6blE6kbMD3yqGdCfiB2S7GlPVoxa15eX1wRyLH3fLjwwrzJirEaiBS86tI
 1PzHZEOmBlh3DYC6DBKA
 =Wsph
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The big ticket items here are the rework of suspend-to-idle in order
  to add proper support for power button wakeup from it on recent Dell
  laptops and the rework of interfaces exporting the current CPU
  frequency on x86.

  In addition to that, support for a few new pieces of hardware is
  added, the PCI/ACPI device wakeup infrastructure is simplified
  significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
  bus locking infrastructure.

  Also, there are some functional improvements for intel_pstate, tools
  updates and small fixes and cleanups all over.

  Specifics:

   - Rework suspend-to-idle to allow it to take wakeup events signaled
     by the EC into account on ACPI-based platforms in order to properly
     support power button wakeup from suspend-to-idle on recent Dell
     laptops (Rafael Wysocki).

     That includes the core suspend-to-idle code rework, support for the
     Low Power S0 _DSM interface, and support for the ACPI INT0002
     Virtual GPIO device from Hans de Goede (required for USB keyboard
     wakeup from suspend-to-idle to work on some machines).

   - Stop trying to export the current CPU frequency via /proc/cpuinfo
     on x86 as that is inaccurate and confusing (Len Brown).

   - Rework the way in which the current CPU frequency is exported by
     the kernel (over the cpufreq sysfs interface) on x86 systems with
     the APERF and MPERF registers by always using values read from
     these registers, when available, to compute the current frequency
     regardless of which cpufreq driver is in use (Len Brown).

   - Rework the PCI/ACPI device wakeup infrastructure to remove the
     questionable and artificial distinction between "devices that can
     wake up the system from sleep states" and "devices that can
     generate wakeup signals in the working state" from it, which allows
     the code to be simplified quite a bit (Rafael Wysocki).

   - Fix the wakeup IRQ framework by making it use SRCU instead of RCU
     which doesn't allow sleeping in the read-side critical sections,
     but which in turn is expected to be allowed by the IRQ bus locking
     infrastructure (Thomas Gleixner).

   - Modify some computations in the intel_pstate driver to avoid
     rounding errors resulting from them (Srinivas Pandruvada).

   - Reduce the overhead of the intel_pstate driver in the HWP
     (hardware-managed P-states) mode and when the "performance" P-state
     selection algorithm is in use by making it avoid registering
     scheduler callbacks in those cases (Len Brown).

   - Rework the energy_performance_preference sysfs knob in intel_pstate
     by changing the values that correspond to different symbolic hint
     names used by it (Len Brown).

   - Make it possible to use more than one cpuidle driver at the same
     time on ARM (Daniel Lezcano).

   - Make it possible to prevent the cpuidle menu governor from using
     the 0 state by disabling it via sysfs (Nicholas Piggin).

   - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
     AMD systems (Yazen Ghannam).

   - Make the CPPC cpufreq driver take the lowest nonlinear performance
     information into account (Prashanth Prakash).

   - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
     driver and clean up the sfi, exynos5440 and intel_pstate drivers
     (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
     Wysocki, Tao Wang).

   - Fix a few minor issues in the generic power domains (genpd)
     framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
     Perttunen, Viresh Kumar).

   - Fix a couple of minor issues in the operating performance points
     (OPP) framework and clean it up somewhat (Viresh Kumar).

   - Fix a CONFIG dependency in the hibernation core and clean it up
     slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).

   - Add rk3228 support to the rockchip-io adaptive voltage scaling
     (AVS) driver (David Wu).

   - Fix an incorrect bit shift operation in the RAPL power capping
     driver (Adam Lessnau).

   - Add support for the EPP field in the HWP (hardware managed
     P-states) control register, HWP.EPP, to the x86_energy_perf_policy
     tool and update msr-index.h with HWP.EPP values (Len Brown).

   - Fix some minor issues in the turbostat tool (Len Brown).

   - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
     minor issue in it (Sherry Hurwitz).

   - Assorted cleanups, mostly related to the constification of some
     data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
     Kozlowski)"

* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
  cpufreq: Update scaling_cur_freq documentation
  cpufreq: intel_pstate: Clean up after performance governor changes
  PM: hibernate: constify attribute_group structures.
  cpuidle: menu: allow state 0 to be disabled
  intel_idle: Use more common logging style
  PM / Domains: Fix missing default_power_down_ok comment
  PM / Domains: Fix unsafe iteration over modified list of domains
  PM / Domains: Fix unsafe iteration over modified list of domain providers
  PM / Domains: Fix unsafe iteration over modified list of device links
  PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
  PM / Domains: Call driver's noirq callbacks
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  PM / QoS: constify *_attribute_group.
  PM / AVS: rockchip-io: add io selectors and supplies for rk3228
  powercap/RAPL: prevent overridding bits outside of the mask
  PM / sysfs: Constify attribute groups
  ...
2017-07-04 13:39:41 -07:00
H. Nikolaus Schaller 7bb5a650f3 power: supply: twl4030-charger: add deferred probing for phy and iio
This fixes an issue if both this twl4030_charger driver and
phy-twl4030-usb are compiled as modules and loaded in random order.

It has been observed on GTA04 and OpenPandora devices that in worst
case the boot process hangs and in best case the AC detection fails
with a warning.

Therefore we add deferred probing checks for the usb_phy and the
iio channel for AC detection.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-03 19:15:22 +02:00
H. Nikolaus Schaller 3950c95e2c power: supply: twl4030-charger: move irq allocation to just before irqs are enabled
And initialize workers and notifiers as soon as possible.

This avoids a potential race if irqs are enabled and triggered too early
before the worker is properly set up.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-03 19:15:00 +02:00
David Wu 1a99d0c796 PM / AVS: rockchip-io: add io selectors and supplies for rk3228
This adds the necessary data for handling io voltage domains on the rk3228.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28 00:40:17 +02:00
Shawn Nematbakhsh bfa953d336 power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE
According to the smart battery spec (1), the CAPACITY_MODE bit does not
influence the value read from RelativeStateOfCharge(), so don't bother
changing CAPACITY_MODE when doing such a read.

(1) - Smart Battery Data Specification, Rev 1.1, Dec. 11, 1998

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-15 16:52:04 +02:00
Shawn Nematbakhsh fe8a653439 power: supply: sbs-battery: Prevent CAPACITY_MODE races
A subset of smart battery commands return charge or energy depending on
the CAPACITY_MODE bit setting of BatteryMode(). In order to
unambiguously read a charge or energy value, it is necessary to ensure
that CAPACITY_MODE is set as desired, and not changed for the duration
of the attribute read.

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-15 16:51:25 +02:00
Phil Reid 48f680c0a9 power: supply: bq24735: remove incorrect le16_to_cpu calls
i2c_smbus commands handle the correct byte order for smbus transactions
internally. This will currently result in incorrect operation on big
endian systems.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-15 16:47:35 +02:00
Phil Reid a1bbec72f9 power: supply: sbs-battery: remove incorrect le16_to_cpu calls
i2c_smbus commands handle the correct byte order for smbus transactions
internally. This will currently result in incorrect operation on big
endian systems.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-15 16:45:55 +02:00
Tony Lindgren fc44313830 power: supply: cpcap-charger: Add missing power_supply_config
Otherwise cpcap-battery won't probe properly with the power-supplies
property configured but will fail with "Not all required supplies found,
defer probe".

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-15 10:16:59 +02:00
H. Nikolaus Schaller 5e6eb025b0 power: supply: twl4030-charger: move allocation of iio channel to the beginning
This is in prepraration for EPROBE_DEFER handling because it is quite
likely that geting the (madc) iio channel is deferred more often than
later steps.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:44 +02:00
H. Nikolaus Schaller e8847c5654 power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:43 +02:00
Arvind Yadav 355679b270 power: supply: core: constify psy_tcd_ops.
File size before:
text	data	bss	dec   hex filename
4240	 200	 80	4520 11a8 drivers/power/supply/power_supply_core.o

File size After adding 'const':
text	data	bss	dec   hex filename
4296	 136	 80	4512 11a0 drivers/power/supply/power_supply_core.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:43 +02:00
Andy Shevchenko 37853952b9 power: supply: twl4030_charger: Use sysfs_match_string() helper
Use sysfs_match_string() helper instead of open coded variant.

Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-12 01:40:05 +02:00
Andrew F. Davis de0d6dbdbd w1: Add subsystem kernel public interface
Like other subsystems we should be able to define slave devices outside
of the w1 directory. To do this we move public facing interface
definitions to include/linux/w1.h and rename the internal definition
file to w1_internal.h.

As w1_family.h and w1_int.h contained almost entirely public
driver interface definitions we simply removed these files and
moved the remaining definitions into w1_internal.h.

With this we can now start to move slave devices out of w1/slaves and
into the subsystem based on the function they implement, again like
other drivers.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:54:54 +02:00
Sebastian Reichel 153e9e90ff Merge branch 'psy-reboot-mode-immutable' into psy-next 2017-06-08 18:21:25 +02:00
Bjorn Andersson f1bea8793d power: reset: reboot-mode: Make include file global
Move the reboot-mode.h include file into include/linux to allow drivers
outside drivers/power/reset to implement reboot-mode.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 18:18:19 +02:00
Quentin Schulz c800384490 power: supply: axp20x_battery: add DT support for battery max constant charge current
This adds the ability to set the maximum constant charge current,
supported by the battery, delivered by this battery power supply to the
battery.

The maximum constant charge current set in DT will also set the default
constant charge current supplied by this supply.

The actual user can modify the constant charge current within the range
of 0 to maximum constant charge current via sysfs.
The user can also modify the maximum constant charge current to widen
the range of possible constant charge current. While this seems quite
risky, a message is printed on the console to warn the user this might
damage the battery. The reason for letting the user change the maximum
constant charge current is for letting users change the battery and
thus, let them adjust the maximum constant charge current according to
what the battery can support.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 17:57:53 +02:00
Quentin Schulz f8c91bae0c power: supply: axp20x_battery: add support for DT battery
This adds support in X-Powers AXP20X and AXP22X battery driver for a
fixed battery in DT.

It will take the minimum supported voltage by the battery as defined in
the battery DT node and set the V_OFF register to this value, telling
the system to shut down if the supplied power is below this value.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 17:57:51 +02:00
Liam Breck ccce440956 power: supply: bq27xxx: Add power_supply_battery_info support
Previously there was no way to configure these chips in the event that the
defaults didn't match the battery in question.

For chips with RAM data memory (and also those with flash/NVM data memory
if CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is defined and the user has not
set module param dt_monitored_battery_updates_nvm=0) we now call
power_supply_get_battery_info(), check its values, and write battery
properties to chip data memory if there is a dm_regs table for the chip.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 17:57:38 +02:00
Liam Breck 0670c9b358 power: supply: bq27xxx: Add chip data memory read/write support
Add these to enable read/write of chip data memory RAM/NVM/flash:
  bq27xxx_battery_seal()
  bq27xxx_battery_unseal()
  bq27xxx_battery_set_cfgupdate()
  bq27xxx_battery_soft_reset()
  bq27xxx_battery_read_dm_block()
  bq27xxx_battery_write_dm_block()
  bq27xxx_battery_checksum_dm_block()

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 17:57:34 +02:00
Matt Ranostay 14073f6614 power: supply: bq27xxx: Add bulk transfer bus methods
Declare bus.write/read_bulk/write_bulk().
Add I2C write/read_bulk/write_bulk() to implement the above.
Add bq27xxx_write/read_block/write_block() helpers to call the above.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: "Andrew F. Davis" <afd@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 16:29:29 +02:00
Liam Breck 413de34ab9 power: supply: core: Add power_supply_prop_precharge
Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT
Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 16:29:28 +02:00
Liam Breck c08b1f45d7 power: supply: core: Add power_supply_battery_info and API
power_supply_get_battery_info() reads battery data from devicetree.
struct power_supply_battery_info provides battery data to drivers.
Its fields correspond to elements in enum power_supply_property.
Drivers may surface battery data in sysfs via corresponding
POWER_SUPPLY_PROP_* fields.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 16:29:28 +02:00
Tony Lindgren 874b2adbed power: supply: cpcap-battery: Add a battery driver
On the CPCAP PMIC we can use the ADCs for monitoring the battery,
and there is also a coulomb counter. So let's add basic support for
the battery driver.

I did not add any capacity prediction as that should probably be
done in the user space. Or at least user space should tell the kernel
some battery statistics and then the kernel driver could display the
capacity based on that.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 13:05:54 +02:00
Florian Fainelli 1d2495e8c2 power: reset: Default POWER_RESET_BRCMSTB to BMIPS_GENERIC
On Broadcom MIPS STB platforms, BMIPS_GENERIC is the Kconfig symbol that
is used, make this reboot driver default to that value to make sure we
can reboot a system properly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:30 +02:00
Florian Fainelli 12031fcae9 power: reset: Allow selecting POWER_RESET_BRCMSTB on ARM64
Since commit 37eb56dc79 ("arm64: Add Broadcom Set Top Box Kconfig
entry point") we have ARCH_BRCMSTB also visible on ARM64 platform, yet
this reboot driver was not selectable, so fix that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:29 +02:00
Alexandre Belloni be04a0d77e power: reset: at91-sama5d2_shdwc: fix clobber list
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:29 +02:00
Alexandre Belloni 2e9bbbf694 power: reset: at91-poweroff: fix clobber list
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:28 +02:00
H. Nikolaus Schaller 49fb384653 power: supply: twl4030-charger: remove nonstandard max_current sysfs attribute
Since we now support the standard 'input_current_limit' property by

commit 3fb319c2cd ("power: supply: twl4030-charger: add writable INPUT_CURRENT_LIMIT property")

we can now remove the nonstandard 'max_current' sysfs attribute.

See Documentation/power/power_supply_class.txt line 125

Both are functionally equivalent. From ABI point of view it is just a rename
of the property.

This also removes the entry in Documentation/ABI/testing/sysfs-class-power-twl4030

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:28 +02:00
Dan Carpenter e12854174b power: supply: ltc3651-charger: fix some error codes in probe
There are several cut and past bugs here.  ltc3651_charger->charger is
NULL at this point, so we return success instead of the intended error
codes.

Fixes: c94d4ed017 ("power: supply: Add ltc3651-charger driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[Wei Yongjun found the same issue independently]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:27 +02:00
David Lechner 105df60f20 power: supply: sysfs: parse string as enum when writing property
This fixes the TODO to parse strings and convert them to enum values
when writing to a power_supply class property sysfs attribute.

There is at least one driver that has a writable enum property that
previously could only be written as an integer, so a fallback to writing
enums as integers instead of strings is provided so we don't break existing
userspace programs.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-08 13:05:27 +02:00
Benson Leung 71399aa5d6 power: supply: Add Apple Brick ID power supply type
Apple currently supports three very common USB chargers:
https://www.apple.com/power-adapters/

These chargers implement a proprietary Apple method for advertising
1A, 2.1A, and 2.4A at 5V called "Brick ID".
In addition, 3rd parties implement the same charging method in many
charging accessories that work with iOS devices.

Devices that have charger detection chips such as the Pericom PI3USB9281,
eg. Google Chromebook Pixel 2015, are capable of detecting
these chargers, so let's add a type to facilicate passing that info
up to userspace.

This adds a separate power supply type for Apple's proprietary
"Brick ID" charging method.

Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08 13:05:22 +02:00
Hans de Goede 58a36bb068 power: supply: core: Add support for supplied-from device-property
On devicetree using platforms the devicetree can provide info on which
power-supplies supply another power-supply through phandles.

This commit adds support for providing this info on non devicetree
platforms through the platform code setting a supplied-from
device-property on the power-supplies parent device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-15 15:28:15 +02:00
Julia Lawall a463182031 power: supply: axp20x_usb_power: Drop unnecessary static
Drop static on a local variable, when the variable is either first
initialized or never used, on every possible execution path through the
function.  The static has no benefit, and dropping it reduces the code
size.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;
// </smpl>

The change in code size is indicates by the following output from the size
command.

before:
   text    data     bss     dec     hex filename
   2865     252       8    3125     c35 drivers/power/supply/axp20x_usb_power.o

after:
   text    data     bss     dec     hex filename
   2822     252       0    3074     c02 drivers/power/supply/axp20x_usb_power.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-15 15:28:14 +02:00
Mike Looijmans c94d4ed017 power: supply: Add ltc3651-charger driver
The LTC3651 reports its status via GPIO lines. This driver translates
the GPIO levels to battery charger status information via sysfs.
It relies on devicetree to supply the IO configuration.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-15 15:28:10 +02:00
Tony Lindgren 70c9fc9a56 power: supply: cpcap-charger: Fix charger voltages based on ADC values
With the ADC driver working, we can now fix the voltage table based on
the values read from the ADC.

Note that unlike the ICHRG registers, the VCHRG register bits don't
match the MC13783UG.pdf.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-05-14 18:26:13 +02:00
Tony Lindgren 1e45330bd2 power: supply: cpcap-charger: Update charge current table and add comments
Turns out a similar battery charger hardware is documented for NXP MC13783
PMIC in "MC13783 Power Management and Audio Circuit Users's Guide" named
MC13783UG.pdf. Looks like the CPCAP charge current table matches that, so
let's start using the nominal values from it.

While at it, let's also add comments to some of the mystery CPCAP charger
registers based on the MC13783UG.pdf documentation.

Note that this patch does not contain any functional changes, the register
values being used stay the same.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-05-14 18:26:13 +02:00
Linus Torvalds 6b402bdfdb power supply and reset changes for the v4.12 series (part 2)
* New battery driver for AXP20X and AXP22X PMICs
 * Improve max17042_battery for usage on x86
 * Misc small cleanups & fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlkU2QYACgkQ2O7X88g7
 +poudxAAjAzrD6WGMtH+++53j8sKTel1eyuKImsv/4TgkWjyBeXzeeEtHX4T8qCJ
 HtfGf/JB7sYCWdSFXCxYmOy051r6InGd3VxC2mMvkuz6p8ya1YAR41oHwXEBdsa5
 TcYhIe9GNHEhdENTLsKywXOA3gh1REjU9ljCUJJwAxUpqDfU6pRSoFqwB0SAu6zC
 /FjGAcooyOyKT9tsZuJ68Xw01thtsowMLNKD6gkXSiMfH2wVhlEijoQ3OwJzW423
 mvxukptrDaMiXWjjwY46/ExfEmoEmDo8le5vnB6m3OUOkTmsj2A7RI0GwYPjUM6S
 ZCrGn4yNeq3c277rAixY8twhS9zLVM3vuFWOKeT9zSIleJ7eFu9er6U2jJZvA17C
 BDoZg4RWFQrYv6YcMsADS8Wk4jYwhahdApNbG2RcUrC3qH+QTqGw6/7LCJ9X3dXs
 tSWszwSw9pGIPNnzzhwI7nNREFTfy8W+0qRRyUw2LWEVTJBxzUYmF8L3hFnhr/94
 JqFdDWqSCEZpi0sgjp3IxDAlZJ9p/lTFN7iA8UdK912kBA+1Mo4JQqd6piXxYvJM
 yCjv4zDclpDa7QbV286y/FOLy/qnUrQ+8qIGvSgAJh5v32mJc8uJqP+4g8401D5T
 6YfzboSUQ1s4hofFh1wIO+swq5iTcLJrhZyaCWC9qgKQVWx8tSw=
 =lF9I
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull more power-supply updates from Sebastian Reichel:
 "The power-supply subsystem has a few more changes for the v4.12 merge
  window:

   - New battery driver for AXP20X and AXP22X PMICs

   - Improve max17042_battery for usage on x86

   - Misc small cleanups & fixes"

* tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits)
  power: supply: cpcap-charger: Keep trickle charger bits disabled
  power: supply: cpcap-charger: Fix enable for 3.8V charge setting
  power: supply: cpcap-charger: Fix charge voltage configuration
  power: supply: cpcap-charger: Fix charger name
  power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static
  power: supply: sbs-battery: Add alert callback
  mailmap: add Sebastian Reichel
  power: supply: avoid unused twl4030-madc.h
  power: supply: sbs-battery: Correct supply status with current draw
  power: supply: sbs-battery: Don't ignore the first external power change
  power: supply: pda_power: move from timer to delayed_work
  power: supply: max17042_battery: Add support for the SCOPE property
  power: supply: max17042_battery: Add support for the CHARGE_NOW property
  power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property
  power: supply: max17042_battery: mAh readings depend on r_sns value
  power: supply: max17042_battery: Add support for the VOLT_MIN property
  power: supply: max17042_battery: Add support for the TECHNOLOGY attribute
  power: supply: max17042_battery: Add external_power_changed callback
  power: supply: max17042_battery: Add support for the STATUS property
  power: supply: max17042_battery: Add default platform_data fallback data
  ...
2017-05-12 12:02:21 -07:00
Tony Lindgren 35f4f99ccb power: supply: cpcap-charger: Keep trickle charger bits disabled
Android does not seem to set the trickle charger bits, and these
seem to be only used by the bootloader when bringing up a
completely discharged battery. So let's keep the trickle charging
bits disabled and avoid misconfiguring the hardware.

Fixes: 0c9888e3c1 ("power: supply: cpcap-charger: Add minimal
CPCAP PMIC battery charger")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-04 17:52:00 +02:00
Tony Lindgren 6ffa8ace70 power: supply: cpcap-charger: Fix enable for 3.8V charge setting
Zero is a valid register value for for 3.8V charging.

Fixes: 0c9888e3c1 ("power: supply: cpcap-charger: Add minimal
CPCAP PMIC battery charger")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-04 17:51:52 +02:00
Tony Lindgren 3ae5f06681 power: supply: cpcap-charger: Fix charge voltage configuration
We have the charge voltage wrong, it should be 4.35V instead of 4.2V.
This will cause the battery to never get fully charged.

I noticed this when looking at the Andoid kernel battery and charger
status for a fully charged battery:

POWER_SUPPLY_VOLTAGE_NOW=4351000

Also the battery on droid 4 says "4.35, 1735/1785mAh (min/typ),
6.6/6.8 Wh (min/typ)". Presumably the 4.35 on the battery is the
charge voltage.

And finally, on Android the CPCAP CRM register is set to 0x03b5 where
the b is the charge voltage.

Let's fix the charge voltage define and update the charge configuration
to use the 4.35V setting.

Fixes: 0c9888e3c1 ("power: supply: cpcap-charger: Add minimal
CPCAP PMIC battery charger")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-04 17:51:44 +02:00
Tony Lindgren 4f700a5285 power: supply: cpcap-charger: Fix charger name
I noticed we have a different name from what Android is using.
Let's not break the /sys/class/power user space interface here
and use the same naming as Android has.

On Android we have the following for droid 4:

$ ls /sys/class/power_supply/
ac battery usb

So let's use the usb naming here for charger too.

Fixes: 0c9888e3c1 ("power: supply: cpcap-charger: Add minimal
CPCAP PMIC battery charger")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-04 17:51:32 +02:00
Sebastian Reichel 50730eb367 power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static
The function twl4030_bci_property_is_writeable can be made static
as it does not need to be in global scope.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-04 16:50:44 +02:00
Linus Torvalds 08be881064 ACPI updates for v4.12-rc1
- Update the core device enumeration code to make it more internally
    consistent and robust and drop the force_remove sysfs attribute
    that could be used to tell it to ignore errors on device
    hot-removal which was dangerous in general and no real and
    still relevant use cases for it could be found (Rafael Wysocki,
    Michal Hocko).
 
  - Make the core device enumeration code use _PXM to associate
    platform devices created by it with specific NUMA nodes (Shanker
    Donthineni).
 
  - Extend the CPPC library by adding more sysfs entries for
    performance capabilities to it and making it use the lowest
    nonlinear performance parameter (Prashanth Prakash).
 
  - Make the CPU online more consistent with CPU initialization in
    the ACPI processor driver (Prashanth Prakash).
 
  - Update the AC and battery drivers to help them avoid attaching to
    devices that cannot be handled by them and update the axp288_charger
    power supply driver to work correctly on ACPI systems without the
    INT3496 device (Hans de Goede).
 
  - Add an ACPI operation region driver for the Intel CHT Whiskey Cove
    PMIC and update the xpower operation region driver to work without
    IIO which isn't really necessary for it to work (Hans de Goede).
 
  - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
    (Kai Heng Feng).
 
  - Make the code in the ACPI video driver easier to follow by adding
    symbols and comments to it (Dmitry Frank).
 
  - Update ACPI documentation and drop a function that has no users
    from the tables-handling code (Cao jin, Baoquan He).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZB5h0AAoJEILEb/54YlRx8+EP/j468sN7PEBDXZLF1jsIJK6g
 IozbOMAAVXBwDrfTOLYSVe3KOUJH0tVdax768tv6Gu94jbUT+nPeSNNDTaWbOpli
 fi/f6ljSupWzh/TLjIBVAbNuEULcxB6AcMg0fxMRutIQUbr7ie6ioJ1R4UoMRrV8
 HFdlsHiHa9uUMSDuwByzjzQX+TRAvseyBvkLxUlMMwJQ3+/+yH2FoGRmjzS0ZLAC
 lTyzcAasznrGsqlDoFunNegoBFkgnJv5vJ7fVfujQb5irpX51iog6aNehLRt3GwX
 opRlNjFIYk3XTSTR2QvV/utUrWuPYKJwkCulnlyACoWCmsYGbt115iEWY0YNVV71
 tmHRK/TkbYHSg4H/Tgc4i1bMvWM4GOULq3NaltxfQA31O8s++02zL7HxblA763AP
 4TmofNDTW3pF7GZ5DxtysXCCURdShj7y8ta4K+A0l4g6iCaTHLzFNlEJp2WSL6xo
 LFg/VvAHFnF34OlDobKlm8hB53thHGd0UD0dnY4hwiwpsTwlc/e5pxgIpKEkw1/L
 aO3VxIMtzVG93cno7JM7/6kWy2Qcnk2VqoPFiQPaB60QKfyKjBKCRYVeUVesrHrE
 443MoJS3KmsenPSD7ACpW6yKmGP3p+3CKakdvE3C09XNToq98+3W0lsU5NP9ys94
 m75frKXPSt9EAUqjsJ0Z
 =IwcL
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These are some device enumeration code changes, updates of the AC and
  battery drivers to help them avoid attaching to devices that cannot be
  handled by them, new operation region driver for the Intel CHT Whiskey
  Cove PMIC, new sysfs entries for CPPC performance capabilities, a new
  _REV quirk blacklist entry and a couple of assorted minor fixes and
  cleanups.

  Specifics:

   - Update the core device enumeration code to make it more internally
     consistent and robust and drop the force_remove sysfs attribute
     that could be used to tell it to ignore errors on device
     hot-removal which was dangerous in general and no real and still
     relevant use cases for it could be found (Rafael Wysocki, Michal
     Hocko).

   - Make the core device enumeration code use _PXM to associate
     platform devices created by it with specific NUMA nodes (Shanker
     Donthineni).

   - Extend the CPPC library by adding more sysfs entries for
     performance capabilities to it and making it use the lowest
     nonlinear performance parameter (Prashanth Prakash).

   - Make the CPU online more consistent with CPU initialization in the
     ACPI processor driver (Prashanth Prakash).

   - Update the AC and battery drivers to help them avoid attaching to
     devices that cannot be handled by them and update the
     axp288_charger power supply driver to work correctly on ACPI
     systems without the INT3496 device (Hans de Goede).

   - Add an ACPI operation region driver for the Intel CHT Whiskey Cove
     PMIC and update the xpower operation region driver to work without
     IIO which isn't really necessary for it to work (Hans de Goede).

   - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
     (Kai Heng Feng).

   - Make the code in the ACPI video driver easier to follow by adding
     symbols and comments to it (Dmitry Frank).

   - Update ACPI documentation and drop a function that has no users
     from the tables-handling code (Cao jin, Baoquan He)"

* tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
  ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
  ACPI / scan: Avoid enumerating devices more than once
  ACPI / scan: Apply default enumeration to devices with ACPI drivers
  power: supply: axp288_charger: Only wait for INT3496 device if present
  ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
  ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
  ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
  ACPI / utils: Add new acpi_dev_present helper
  ACPI / video: add comments about subtle cases
  ACPI / video: get rid of magic numbers and use enum instead
  ACPI / doc: linuxized-acpica.txt: fix typos
  ACPI / blacklist: add _REV quirk for Dell Inspiron 7537
  ACPI / tables: Drop acpi_parse_entries() which is not used
  ACPI / CPPC: add sysfs entries for CPPC perf capabilities
  ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()
  ACPI / platform: Update platform device NUMA node based on _PXM method
  ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()
  ACPI / scan: Drop support for force_remove
2017-05-01 14:13:28 -07:00
Linus Torvalds 0e285e9088 Power management updates for v4.12-rc1
- Rework the intel_pstate driver's sysfs interface to make it
    more straightforward and more intuitive (Rafael Wysocki).
 
  - Make intel_pstate support all processors which advertise HWP
    (hardware-managed P-states) to the kernel in all operation modes
    and make it use the load-based P-state selection algorithm on a
    wider range of systems in the active mode (Rafael Wysocki).
 
  - Add cpufreq driver for Tegra186 (Mikko Perttunen).
 
  - Add support for Gemini Lake SoCs to intel_pstate (David Box).
 
  - Add support for MT8176 and MT817x to the Mediatek cpufreq driver
    and clean up that driver a bit (Daniel Kurtz).
 
  - Clean up intel_pstate and optimize it slightly (Rafael Wysocki).
 
  - Update the schedutil cpufreq governor, mostly to fix a couple of
    issues with it related to specific workloads, and rework its sysfs
    tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).
 
  - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
    (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
    YuanTian Tang).
 
  - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
    Uytterhoeven).
 
  - Add support for "always on" power domains to the genpd (generic
    power domains) framework and clean up that code somewhat (Ulf
    Hansson, Lina Iyer, Viresh Kumar).
 
  - Fix minor issues in the powernv cpuidle driver and clean it up
    (Anton Blanchard, Gautham Shenoy).
 
  - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and
    add an analogous boot-profiling utility called AnalyzeBoot to it
    (Todd Brandt).
 
  - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
    Scaling) driver (David Wu).
 
  - Fix minor issues in the cpuidle core, the intel_pstate_tracer
    utility, the devfreq framework and the PM core documentation
    (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZB5gGAAoJEILEb/54YlRx+78QAJRu+xAA9KtW2+loNyV8iBOB
 EFmQLrvz9jCDyYWsHE5huA1k6EVu5QE74HBfgDn4od9s1VqU1zWdEjqKYiaMwlCt
 EHxYCZ4YKeF31O3P3CtearBz9IXrckRx/XZ3F1jRsGGWooWv7o3U6PPN9iREmCzi
 9dB2j0UD4lCwrnpsDMrJ0GqLu4agn9pcIKDtu4VfszVwYtza0vOQvvlgg1fQS1jX
 BnNfaxN0lmpSlxDjtWfM//hfLzEWK8NlHiKWJFPnWFxJIAX1QL2QKnznF/Tqi5N5
 el9tQXCTRujlD7BLyl6FdsaowbiUUEcMqeh2k01Vz20WSmNDHIpfrV9MtzJ7biUK
 /DopyShUrpgJclKNF7BARJAJc19+PMkv3HMnOnsnhOsBNBpJjsL6FZPA95MMjI0o
 xmRQkixl31NWIMk60EIC6PaMLsxjhAWjiYi5D93bzkhnJTnQswvNb4ROPG+X2FCU
 6YgBogsYKkqp93TTJ49OFXIvu3o7NwOyEQQW8mnNY8ffaFdWuGzOX4HkOoKHCMTD
 rT0qT/2q+7LPK87YwTPIVtpGVltnCr/SVI/FtAGXPysyghu2Z+4GGP4eh2+pSAUj
 7Dqxdw3q7zs8ou6LOThTyNJrR+N/w1JPloprBleJR3TNcJjOy/SBjfp7yL0uopIK
 j5exr76ImVq7zzjyrYoa
 =6M3e
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time the majority of changes go to the cpufreq subsystem (and to
  the intel_pstate driver in particular) and there are some updates in
  the generic power domains framework, cpuidle, tools and a couple of
  other places.

  One thing worth mentioning is that the intel_pstate's sysfs interface
  has been reworked to be more consistent with the general expectations
  of the cpufreq core and less confusing, hopefully for the better.
  Also, we have a new cpufreq driver for Tegra186 and new hardware
  support in intel_pstata and the Mediatek cpufreq driver.

  Apart from that, the AnalyzeSuspend utility for system suspend
  profiling gets a companion called AnalyzeBoot for the analogous
  profiling of system boot and they both go into one place under
  tools/power/pm-graph/.

  The rest is mostly fixes, cleanups and code reorganization.

  Specifics:

   - Rework the intel_pstate driver's sysfs interface to make it more
     straightforward and more intuitive (Rafael Wysocki).

   - Make intel_pstate support all processors which advertise HWP
     (hardware-managed P-states) to the kernel in all operation modes
     and make it use the load-based P-state selection algorithm on a
     wider range of systems in the active mode (Rafael Wysocki).

   - Add cpufreq driver for Tegra186 (Mikko Perttunen).

   - Add support for Gemini Lake SoCs to intel_pstate (David Box).

   - Add support for MT8176 and MT817x to the Mediatek cpufreq driver
     and clean up that driver a bit (Daniel Kurtz).

   - Clean up intel_pstate and optimize it slightly (Rafael Wysocki).

   - Update the schedutil cpufreq governor, mostly to fix a couple of
     issues with it related to specific workloads, and rework its sysfs
     tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).

   - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
     (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
     YuanTian Tang).

   - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
     Uytterhoeven).

   - Add support for "always on" power domains to the genpd (generic
     power domains) framework and clean up that code somewhat (Ulf
     Hansson, Lina Iyer, Viresh Kumar).

   - Fix minor issues in the powernv cpuidle driver and clean it up
     (Anton Blanchard, Gautham Shenoy).

   - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add
     an analogous boot-profiling utility called AnalyzeBoot to it (Todd
     Brandt).

   - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
     Scaling) driver (David Wu).

   - Fix minor issues in the cpuidle core, the intel_pstate_tracer
     utility, the devfreq framework and the PM core documentation
     (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)"

* tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
  PM / runtime: Document autosuspend-helper side effects
  PM / runtime: Fix autosuspend documentation
  tools: power: pm-graph: Package makefile and man pages
  tools: power: pm-graph: AnalyzeBoot v2.0
  tools: power: pm-graph: AnalyzeSuspend v4.6
  cpufreq: Add Tegra186 cpufreq driver
  cpufreq: imx6q: Fix error handling code
  cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
  cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
  cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
  cpuidle: powernv: Don't continually set thread priority in snooze_loop()
  cpuidle: powernv: Don't bounce between low and very low thread priority
  cpuidle: cpuidle-cps: remove unused variable
  tools/power/x86/intel_pstate_tracer: Adjust directory ownership
  cpufreq: schedutil: Use policy-dependent transition delays
  cpufreq: schedutil: Reduce frequencies slower
  PM / devfreq: Move struct devfreq_governor to devfreq directory
  PM / Domains: Ignore domain-idle-states that are not compatible
  cpufreq: intel_pstate: Add support for Gemini Lake
  powernv-cpuidle: Validate DT property array size
  ...
2017-05-01 14:09:46 -07:00
Phil Reid cda3b01368 power: supply: sbs-battery: Add alert callback
To simplify the sbs-manager code and notification of battery removal
use the i2c alert callback to notify the sbs-battery driver that an
event has occurred.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 14:28:19 +02:00
Sebastian Reichel e9574c14fd power: supply: avoid unused twl4030-madc.h
Avoid inclusion of unused twl4030-madc.h. This
will allow twl4030-madc.h to be merged into the
iio driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 13:03:09 +02:00
Paul Kocialkowski 7f93e1fa03 power: supply: sbs-battery: Correct supply status with current draw
The status reported directly by the battery controller is not always
reliable and should be corrected based on the current draw information.

This implements such a correction with a dedicated function, called
where the supply status is retrieved.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:45:43 +02:00
Paul Kocialkowski 4df2cce472 power: supply: sbs-battery: Don't ignore the first external power change
A mechanism to ignore the first external power change notification was
put in place years ago to ignore the power_supply_register notification.

However, this doesn't apply to the current situation anymore, as the
first notification is always the result of a legitimate power change.

This removes this deprecated mechanism, which puts back the driver's
state machine to a sane state (an ignored first notification previously
caused a charging/discharging status inversion).

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:43:20 +02:00
Michael Trimarchi 633e8799dd power: supply: pda_power: move from timer to delayed_work
This changed is needed to avoid locking problem during
boot as shown:

<5>[    8.824096] Registering SWP/SWPB emulation handler
<6>[    8.977294] clock: disabling unused clocks to save power
<3>[    9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269
<3>[    9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[    9.130249] 3 locks held by swapper/0/1:
<4>[    9.134613]  #0:  (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8
<4>[    9.144500]  #1:  (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8
<4>[    9.154357]  #2:  (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec
<4>[    9.163726] Backtrace:
<4>[    9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24)
<4>[    9.175811]  r6:00203230 r5:0000010d r4:d782e000 r3:60000113
<4>[    9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128)
<4>[    9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c)
<4>[    9.201660]  r5:c02d5350 r4:d79a0c64
<4>[    9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118)
<4>[    9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4)
<4>[    9.228027]  r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000
<4>[    9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48)
<4>[    9.243804]  r5:d782e000 r4:c1767e94
<4>[    9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8)
<4>[    9.257537]  r4:c1767e94 r3:00000002
<4>[    9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec)
<4>[    9.272033]  r4:c1767eb0 r3:00000000
<4>[    9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298)
<4>[    9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0)
<4>[    9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0)
<4>[    9.303680]  r4:c1194e98 r3:c00bc778
<4>[    9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68)
<4>[    9.316955]  r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100
<4>[    9.324310] r3:c026ba48
<4>[    9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74)
<4>[    9.336456] Exception stack(0xd782fc08 to 0xd782fc50)
<4>[    9.342041] fc00:                   d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000
<4>[    9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50
<4>[    9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff

Fixes: b2998049cf ("[BATTERY] pda_power platform driver")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:41:58 +02:00
Hans de Goede adb69a3c45 power: supply: max17042_battery: Add support for the SCOPE property
Add support for the SCOPE property, always return SCOPE_SYSTEM,
as the max170xx is used for the main battery on all known systems
with a max170xx.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:58 +02:00
Hans de Goede 6d6b61eafc power: supply: max17042_battery: Add support for the CHARGE_NOW property
At least upower prefers the more precise charge_now sysfs value over
capacity and the max17042 has the info, so lets export it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:54 +02:00
Hans de Goede 2e015412a3 power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property
The info is there, lets export it as a property.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:49 +02:00
Hans de Goede d7d15fc677 power: supply: max17042_battery: mAh readings depend on r_sns value
The PROP_CHARGE_FULL code was hardcoded for the default sense
resistor of 0.010 Ohm, make it use r_sns which contains the
actual sense resistor value in micro-Ohms instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:45 +02:00
Hans de Goede 7bfc9397ff power: supply: max17042_battery: Add support for the VOLT_MIN property
The info is there, so lets export it, like we already do for VOLT_MAX.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:42 +02:00
Hans de Goede ef7fcdaebf power: supply: max17042_battery: Add support for the TECHNOLOGY attribute
The max17042 is intended for Li-Ion or Li-Po batteries, add a TECHNOLOGY
attribute to reflect this. Note this is hardcoded to Li-Ion as there is
no way to tell the difference, and Lithium-Ion Polymer batteries are
a sub-family of Lithium-Ion so Li-Ion technically is correct for both.

Using Li-Ion for both is already done by many drivers and is much
better then not providing any technology info at all.

Suggested-by: Wolfgang Wiedmeyer <wolfgit@wiedmeyer.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:37 +02:00
Hans de Goede dcdddda8fd power: supply: max17042_battery: Add external_power_changed callback
If our supplier changes status, chances are we've changed status too,
let any listeners know about this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:32 +02:00
Hans de Goede a9df22c00d power: supply: max17042_battery: Add support for the STATUS property
Userspace prefers the driver having a status property over having to guess
itself. Specifically this will properly make the GNOME3 UI (and likely
others) properly show discharging / charging / full status, instead
of always showing discharging as status.

Note that in the case there is no charger driver supplying the max17042,
then a status of unknown will get returned. At least upower treats
this the same as not having a status attribute, so in this case nothing
changes from a userspace pov.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:29 +02:00
Hans de Goede 917362135b power: supply: max17042_battery: Add default platform_data fallback data
Some x86 machines use a max17047 fuel-gauge and x86 might be missing
platform_data if not provided by SFI.

This commit adds default platform_data as fallback option so that the
driver can work on boards where no platform_data is provided.

Since not all boards have a thermistor hooked up, set temp_min to 0 and
change the health checks from temp <= temp_min to temp < temp_min to
not trigger on such boards (where temp reads 0).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:25 +02:00
Hans de Goede 2814913c31 power: supply: max17047_battery: The temp alert values are 8-bit 2's complement
The temp alert values are 8-bit 2's complement, so sign-extend them
before reporting them back to the caller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:21 +02:00
Hans de Goede c67c06939e power: supply: max17042_battery: Use sign_extend32 instead of DIY code
Use sign_extend32 to sign-extend variables where necessary instead of
DIY code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:16 +02:00
Colin Ian King 7f232af356 power: supply: ab8500_charger: spelling: "prechage" -> "precharge"
trivial fix to spelling mistake in dev_error message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 12:37:01 +02:00
Arnd Bergmann 6254a6a944 power: supply: axp20x_usb_power: add IIO dependency
When CONFIG_IIO=m and the axp20x_usb_power driver is built-in, we get
a link time error:

drivers/power/built-in.o: In function `axp20x_usb_power_get_property':
undefined reference to `iio_read_channel_processed'
drivers/power/built-in.o: In function `axp20x_usb_power_probe':
undefined reference to `devm_iio_channel_get'
undefined reference to `devm_iio_channel_get'

This adds the same dependency that we already have for the AC power driver
to the USB power driver. For consistency, I'm also moving the two closer
together in the Kconfig file.

Fixes: 33863c938c ("power: supply: axp20x_usb_power: use IIO channels when available")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:56:49 +02:00
Pan Bian 8b20839988 power: supply: isp1704: Fix unchecked return value of devm_kzalloc
Function devm_kzalloc() will return a NULL pointer. However, in function
isp1704_charger_probe(), the return value of devm_kzalloc() is directly
used without validation. This may result in a bad memory access bug.

Fixes: 34a109610e ("isp1704_charger: Add DT support")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:52:25 +02:00
Rahul Bedarkar 756e142a4b power: supply: generic-adc-battery: use SIMPLE_DEV_PM_OPS helper macro
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:52:24 +02:00
Ryosuke Saito bb8fe8ea00 power: supply: sbs-battery: fix the sbs interrupt request
Since we use the default primary handler for the irq, IRQF_ONESHOT must
be set. Otherwise the request fails and the following errors are
displayed:

genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 129
sbs-battery 0-000b: Failed to request irq: -22

Signed-off-by: Ryosuke Saito <raitosyo@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:52:24 +02:00
Quentin Schulz 46c202b5f2 power: supply: add battery driver for AXP20X and AXP22X PMICs
The X-Powers AXP20X and AXP22X PMICs can have a battery as power supply.

This patch adds the battery power supply driver to get various data from
the PMIC, such as the battery status (charging, discharging, full,
dead), current max limit, current current, battery capacity (in
percentage), voltage max and min limits, current voltage and battery
capacity (in Ah).

This battery driver uses the AXP20X/AXP22X ADC driver as PMIC data
provider.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:52:23 +02:00
Liam Breck 1eb2869b3c power: supply: bq24190_charger: Deprecate battery class and replicate its features in charger
The driver was registering two classes, bq24190-battery & -charger.
Because the power supply framework cannot surface features from multiple
drivers in a single class, a fuel gauge driver would create a third class,
which some power management utilities cannot see.

Deprecate the -battery class for future removal and replicate its features
in -charger. Set /sys/class...-charger/online = pg_stat && !batfet_disable.
If device_property "omit-battery-class" is set, don't register -battery.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:52:15 +02:00
Hans de Goede 2848e039c5 power: supply: Make power_supply_am_i_supplied return -ENODEV if there are no suppliers
It is sensible to assume that the hardware actually always has a
way of charging the battery so when power_supply_am_i_supplied does not
find any suppliers, that does not mean that there are none, but simply
that no power_supply-drivers are registered / bound for any suppliers for
the supply calling power_supply_am_i_supplied.

At which point a fuel-gauge driver calling power_supply_am_i_supplied()
cannot determine whether the battery is being charged or not.

Allow a caller of power_supply_am_i_supplied to differentiate between
there not being any suppliers, vs no suppliers being online by returning
-ENODEV if there are no suppliers matching supplied_to / supplied_from,
which allows fuel-gauge drivers to return POWER_SUPPLY_STATUS_UNKNOWN
rather then POWER_SUPPLY_STATUS_DISCHARGING if there are no suppliers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:51:20 +02:00
H. Nikolaus Schaller 19a2ee69c2 power: supply: twl4030-charger: don't check if battery is present
We can't assume that the battery is or stays present after probing
on devices with replaceable battery.

On some devices (e.g. GTA04 or OpenPanodra) it can be removed
and even be hot swapped by the user while device continues to operate
through external AC or USB power (as long as system power consumption
remains below ca. 500mA as provided by USB). Under certain conditions
it is possible to boot without battery.

So it makes no sense to check for this situation during probe and make
the charger driver (and its status reports) completely non-operational if
the battery can be inserted later.

Tested on: GTA04 and OpenPandora.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:41:37 +02:00
H. Nikolaus Schaller 3fb319c2cd power: supply: twl4030-charger: add writable INPUT_CURRENT_LIMIT property
Currently, the twl4030 charger defines its own max_current by directly
creating sysfs nodes. It should use the input_current_limit property
which is e.g. used by the bq24257 driver.

This patch adds the input_current_property with the same semantics as
the max_current property. The code to manage the max_current property
is removed by a separate patch.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01 11:37:11 +02:00