Commit Graph

84 Commits

Author SHA1 Message Date
David Sterba f07ef1de9b crypto: tcrypt - do not attempt to write to readonly variable
Commit da7f033ddc (”crypto: cryptomgr - Add test infrastructure”) added a
const to variable which is later used as target buffer of memcpy.

crypto/tcrypt.c:217:12: warning: passing 'const char (*)[128]' to parameter of type 'void *' discards qualifiers
                                memset(&iv, 0xff, iv_len);


crypto/tcrypt.c:test_cipher_speed()

-       unsigned char *key, iv[128];
+       const char *key, iv[128];
...
        memset(&iv, 0xff, iv_len);

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-03-04 15:28:52 +08:00
Adrian Hoban 69435b94d0 crypto: rfc4106 - Extending the RC4106 AES-GCM test vectors
Updated RFC4106 AES-GCM testing. Some test vectors were taken from
http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/
gcm/gcm-test-vectors.tar.gz

Signed-off-by: Adrian Hoban <adrian.hoban@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-13 21:47:56 +09:00
David S. Miller beb63da739 crypto: tcrypt - Add speed tests for async hashing
These are invoked in the 'mode' range of 400 to 499.

The cost of async vs. sync for the software algorithm implementations
varies.  It can be as low as 16 cycles but as much as a couple hundred.

Here two runs of md5 testing, async then sync:

testing speed of async md5
test  0 (   16 byte blocks,   16 bytes per update,   1 updates):   2448 cycles/operation,  153 cycles/byte
test  1 (   64 byte blocks,   16 bytes per update,   4 updates):   4992 cycles/operation,   78 cycles/byte
test  2 (   64 byte blocks,   64 bytes per update,   1 updates):   3808 cycles/operation,   59 cycles/byte
test  3 (  256 byte blocks,   16 bytes per update,  16 updates):  14000 cycles/operation,   54 cycles/byte
test  4 (  256 byte blocks,   64 bytes per update,   4 updates):   8480 cycles/operation,   33 cycles/byte
test  5 (  256 byte blocks,  256 bytes per update,   1 updates):   7280 cycles/operation,   28 cycles/byte
test  6 ( 1024 byte blocks,   16 bytes per update,  64 updates):  50016 cycles/operation,   48 cycles/byte
test  7 ( 1024 byte blocks,  256 bytes per update,   4 updates):  22496 cycles/operation,   21 cycles/byte
test  8 ( 1024 byte blocks, 1024 bytes per update,   1 updates):  21232 cycles/operation,   20 cycles/byte
test  9 ( 2048 byte blocks,   16 bytes per update, 128 updates): 117184 cycles/operation,   57 cycles/byte
test 10 ( 2048 byte blocks,  256 bytes per update,   8 updates):  43008 cycles/operation,   21 cycles/byte
test 11 ( 2048 byte blocks, 1024 bytes per update,   2 updates):  40176 cycles/operation,   19 cycles/byte
test 12 ( 2048 byte blocks, 2048 bytes per update,   1 updates):  39888 cycles/operation,   19 cycles/byte
test 13 ( 4096 byte blocks,   16 bytes per update, 256 updates): 194176 cycles/operation,   47 cycles/byte
test 14 ( 4096 byte blocks,  256 bytes per update,  16 updates):  84096 cycles/operation,   20 cycles/byte
test 15 ( 4096 byte blocks, 1024 bytes per update,   4 updates):  78336 cycles/operation,   19 cycles/byte
test 16 ( 4096 byte blocks, 4096 bytes per update,   1 updates):  77120 cycles/operation,   18 cycles/byte
test 17 ( 8192 byte blocks,   16 bytes per update, 512 updates): 403056 cycles/operation,   49 cycles/byte
test 18 ( 8192 byte blocks,  256 bytes per update,  32 updates): 166112 cycles/operation,   20 cycles/byte
test 19 ( 8192 byte blocks, 1024 bytes per update,   8 updates): 154768 cycles/operation,   18 cycles/byte
test 20 ( 8192 byte blocks, 4096 bytes per update,   2 updates): 151904 cycles/operation,   18 cycles/byte
test 21 ( 8192 byte blocks, 8192 bytes per update,   1 updates): 155456 cycles/operation,   18 cycles/byte

testing speed of md5
test  0 (   16 byte blocks,   16 bytes per update,   1 updates):   2208 cycles/operation,  138 cycles/byte
test  1 (   64 byte blocks,   16 bytes per update,   4 updates):   5008 cycles/operation,   78 cycles/byte
test  2 (   64 byte blocks,   64 bytes per update,   1 updates):   3600 cycles/operation,   56 cycles/byte
test  3 (  256 byte blocks,   16 bytes per update,  16 updates):  14080 cycles/operation,   55 cycles/byte
test  4 (  256 byte blocks,   64 bytes per update,   4 updates):   8560 cycles/operation,   33 cycles/byte
test  5 (  256 byte blocks,  256 bytes per update,   1 updates):   7040 cycles/operation,   27 cycles/byte
test  6 ( 1024 byte blocks,   16 bytes per update,  64 updates):  50592 cycles/operation,   49 cycles/byte
test  7 ( 1024 byte blocks,  256 bytes per update,   4 updates):  22736 cycles/operation,   22 cycles/byte
test  8 ( 1024 byte blocks, 1024 bytes per update,   1 updates):  24960 cycles/operation,   24 cycles/byte
test  9 ( 2048 byte blocks,   16 bytes per update, 128 updates):  99312 cycles/operation,   48 cycles/byte
test 10 ( 2048 byte blocks,  256 bytes per update,   8 updates):  43520 cycles/operation,   21 cycles/byte
test 11 ( 2048 byte blocks, 1024 bytes per update,   2 updates):  40704 cycles/operation,   19 cycles/byte
test 12 ( 2048 byte blocks, 2048 bytes per update,   1 updates):  39552 cycles/operation,   19 cycles/byte
test 13 ( 4096 byte blocks,   16 bytes per update, 256 updates): 196720 cycles/operation,   48 cycles/byte
test 14 ( 4096 byte blocks,  256 bytes per update,  16 updates):  85152 cycles/operation,   20 cycles/byte
test 15 ( 4096 byte blocks, 1024 bytes per update,   4 updates):  79408 cycles/operation,   19 cycles/byte
test 16 ( 4096 byte blocks, 4096 bytes per update,   1 updates):  76816 cycles/operation,   18 cycles/byte
test 17 ( 8192 byte blocks,   16 bytes per update, 512 updates): 391520 cycles/operation,   47 cycles/byte
test 18 ( 8192 byte blocks,  256 bytes per update,  32 updates): 168464 cycles/operation,   20 cycles/byte
test 19 ( 8192 byte blocks, 1024 bytes per update,   8 updates): 156912 cycles/operation,   19 cycles/byte
test 20 ( 8192 byte blocks, 4096 bytes per update,   2 updates): 154016 cycles/operation,   18 cycles/byte
test 21 ( 8192 byte blocks, 8192 bytes per update,   1 updates): 153856 cycles/operation,   18 cycles/byte

We can ditch the sync hash code at some point if we feel that makes
sense.  For now I've left it there.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19 14:11:21 +10:00
Herbert Xu df2071bd08 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-05-03 11:28:58 +08:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Huang Ying 18bcc9194d crypto: tcrypt - Speed testing support for ghash
Because ghash needs setkey, the setkey and keysize template support
for test_hash_speed is added.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-10 18:30:32 +08:00
Shane Wang f1939f7c56 crypto: vmac - New hash algorithm for intel_txt support
This patch adds VMAC (a fast MAC) support into crypto framework.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-09-02 20:05:22 +10:00
Herbert Xu 7be380f720 crypto: tcrypt - Add mask parameter
This patch adds a mask parameter to complement the existing type
parameter.  This is useful when instantiating algorithms that
require a mask other than the default, e.g., ahash algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-14 16:06:54 +08:00
Herbert Xu ea40065769 crypto: tcrypt - Fix module return code when testing by name
We should return 0/-ENOENT instead of 1/0 when testing by name.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-19 20:37:00 +08:00
Steffen Klassert a873a5f1c4 crypto: tcrypt - Test algorithms by name
This adds the 'alg' module parameter to be able to test an
algorithm by name. If the algorithm type is not ad-hoc
clear for a algorithm (e.g. pcrypt, cryptd) it is possilbe
to set the algorithm type with the 'type' module parameter.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-19 19:46:53 +08:00
Jarod Wilson 4e033a6bc7 crypto: tcrypt - Do not exit on success in fips mode
At present, the tcrypt module always exits with an -EAGAIN upon
successfully completing all the tests its been asked to run. In fips
mode, integrity checking is done by running all self-tests from the
initrd, and its much simpler to check the ret from modprobe for
success than to scrape dmesg and/or /proc/crypto. Simply stay
loaded, giving modprobe a retval of 0, if self-tests all pass and
we're in fips mode.

A side-effect of tracking success/failure for fips mode is that in
non-fips mode, self-test failures will return the actual failure
return codes, rather than always returning -EAGAIN, which seems more
correct anyway.

The tcrypt_test() portion of the patch is dependent on my earlier
pair of patches that skip non-fips algs in fips mode, at least to
achieve the fully intended behavior.

Nb: testing this patch against the cryptodev tree revealed a test
failure for sha384, which I have yet to look into...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02 14:04:57 +10:00
Jarod Wilson f7cb80f2b9 crypto: testmgr - Add ctr(aes) test vectors
Now with multi-block test vectors, all from SP800-38A, Appendix F.5.
Also added ctr(aes) to case 10 in tcrypt.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02 14:04:46 +10:00
Jarod Wilson e08ca2da39 crypto: testmgr - Add ansi_cprng test vectors
Add ANSI X9.31 Continuous Pseudo-Random Number Generator (AES mode),
aka 'ansi_cprng' test vectors, taken from Appendix B.2.9 and B.2.10
of the NIST RNGVS document, found here:
    http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf

Successfully tested against both the cryptodev-2.6 tree and a Red
Hat Enterprise Linux 5.4 kernel, via 'modprobe tcrypt mode=150'.

The selection of 150 was semi-arbitrary, didn't seem like it should
go any place in particular, so I started a new range for rng tests.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02 14:04:40 +10:00
Jarod Wilson 5d667322a2 crypto: testmgr - Add self-tests for rfc4309(ccm(aes))
Add an array of encryption and decryption + verification self-tests
for rfc4309(ccm(aes)).

Test vectors all come from sample FIPS CAVS files provided to
Red Hat by a testing lab. Unfortunately, all the published sample
vectors in RFC 3610 and NIST Special Publication 800-38C contain nonce
lengths that the kernel's rfc4309 implementation doesn't support, so
while using some public domain vectors would have been preferred, its
not possible at this time.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02 14:04:36 +10:00
Frank Seidel 376bacb0a2 crypto: tcrypt - Reduce stack size
Applying kernel janitors todos (printk calls need KERN_*
constants on linebeginnings, reduce stack footprint where
possible) to tcrypts test_hash_speed (where stacks
memory footprint was very high (on i386 1184 bytes to
160 now).

Signed-off-by: Frank Seidel <frank@f-seidel.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02 14:04:09 +10:00
Geert Uytterhoeven 0c01aed50d crypto: testmgr - add zlib test
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04 15:42:15 +08:00
Herbert Xu da7f033ddc crypto: cryptomgr - Add test infrastructure
This patch moves the newly created alg_test infrastructure into
cryptomgr.  This shall allow us to use it for testing at algorithm
registrations.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29 15:49:55 +10:00
Herbert Xu 01b323245e crypto: tcrypt - Add alg_test interface
This patch creates a new interface algorithm testing.  A test can
be requested for a particular implementation of an algorithm.  This
is achieved by taking both the name of the algorithm and that of
the implementation.

The all-inclusive test has also been rewritten to no longer require
a duplicate listing of all algorithms with tests.  In that process
a number of missing tests have also been discovered and rectified.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29 15:49:53 +10:00
Herbert Xu bdecd22821 crypto: tcrypt - Abort and only log if there is an error
The info printed is a complete waste of space when there is no error
since it doesn't tell us anything that we don't already know.  If there
is an error, we can also be more verbose.

In case that there is an error, this patch also aborts the test and
returns the error to the caller.  In future this will be used to
algorithms at registration time.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29 15:49:52 +10:00
Herbert Xu f139cfa7cd crypto: tcrypt - Avoid using contiguous pages
If tcrypt is to be used as a run-time integrity test, it needs to be
more resilient in a hostile environment.  For a start allocating 32K
of physically contiguous memory is definitely out.

This patch teaches it to use separate pages instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29 15:48:57 +10:00
Herbert Xu f176e632ef crypto: tcrypt - Fix AEAD chunk testing
My changeset 4b22f0ddb6

	crypto: tcrpyt - Remove unnecessary kmap/kunmap calls

introduced a typo that broke AEAD chunk testing.  In particular,
axbuf should really be xbuf.

There is also an issue with testing the last segment when encrypting.
The additional part produced by AEAD wasn't tested.  Similarly, on
decryption the additional part of the AEAD input is mistaken for
corruption.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13 20:08:36 +10:00
Herbert Xu 18e33e6d5c crypto: hash - Move ahash functions into crypto/hash.h
All new crypto interfaces should go into individual files as much
as possible in order to ensure that crypto.h does not collapse under
its own weight.

This patch moves the ahash code into crypto/hash.h and crypto/internal/hash.h
respectively.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:18 +08:00
Herbert Xu 4b22f0ddb6 crypto: tcrpyt - Remove unnecessary kmap/kunmap calls
Noticed by Neil Horman: we are doing unnecessary kmap/kunmap calls
on kmalloced memory.  This patch removes them.  For the purposes of
testing SG construction, the underlying crypto code already does plenty
of kmap/kunmap calls anyway.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:16 +08:00
Neil Horman d729de23e8 [CRYPTO] tcrypt: Add self test for des3_ebe cipher operating in cbc mode
Patch to add checking  of DES3 test vectors using CBC mode.  FIPS-140-2
compliance mandates that any supported mode of operation must include a self
test.  This satisfies that requirement for cbc(des3_ede).  The included test
vector was generated by me using openssl.  Key/IV was generated with the
following command:

	openssl enc -des_ede_cbc -P

input and output values were generated by repeating the string "Too many
secrets" a few times over, truncating it to 128 bytes, and encrypting it with
openssl using the aformentioned key.  Tested successfully by myself

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:16 +08:00
Loc Ho cde0e2c819 [CRYPTO] tcrypt: Use asynchronous hash interface
This patch changes tcrypt to use the new asynchronous hash interface
for testing hash algorithm correctness.  The speed tests will continue
to use the existing interface for now.

Signed-off-by: Loc Ho <lho@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:14 +08:00
Adrian-Ken Rueegsegger 2998db37b5 [CRYPTO] tcrypt: Add test vectors for RIPEMD-256 and RIPEMD-320
This patch adds test vectors for RIPEMD-256 and
RIPEMD-320 hash algorithms.

The test vectors are taken from
<http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:13 +08:00
Patrick McHardy a558f1d4f8 [CRYPTO] tcrypt: Catch cipher destination memory corruption
Check whether the destination buffer is written to beyond the last
byte contained in the scatterlist.
    
Also change IDX1 of the cross-page access offsets to a multiple of 4.
This triggers a corruption in the HIFN driver and doesn't seem to
negatively impact other testcases.
    
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:12 +08:00
Herbert Xu b10c170638 [CRYPTO] tcrpyt: Get rid of change log in source
Change logs should be kept in source control systems, not the source.
This patch removes the change log from tcrpyt to stop people from
extending it any more.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:10 +08:00
Adrian-Ken Rueegsegger fd4adf1a0b [CRYPTO] tcrypt: Add test vectors for RIPEMD-128 and RIPEMD-160
This patch adds test vectors for RIPEMD-128 and
RIPEMD-160 hash algorithms and digests (HMAC).

The test vectors are taken from ISO:IEC 10118-3 (2004)
and RFC2286.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:10 +08:00
Darren Jenkins dbb018cd8a crypto: tcrypt - Fix memory leak in test_cipher
Coverity CID: 2306 & 2307 RESOURCE_LEAK

In the second for loop in test_cipher(), data is allocated space with
kzalloc() and is only ever freed in an error case.
Looking at this loop, data is written to this memory but nothing seems
to read from it. 
So here is a patch removing the allocation, I think this is the right
fix.

Only compile tested.

Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-08 15:51:44 +08:00
Kamalesh Babulal 3af5b90bde [CRYPTO] all: Clean up init()/fini()
On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote:
> Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> 
> > This patch cleanups the crypto code, replaces the init() and fini()
> > with the <algorithm name>_init/_fini
> 
> This part ist OK.
> 
> > or init/fini_<algorithm name> (if the 
> > <algorithm name>_init/_fini exist)
> 
> Having init_foo and foo_init won't be a good thing, will it? I'd start
> confusing them.
> 
> What about foo_modinit instead?

Thanks for the suggestion, the init() is replaced with

	<algorithm name>_mod_init ()

and fini () is replaced with <algorithm name>_mod_fini.
 
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:34 +08:00
Kevin Coffman 76cb952179 [CRYPTO] cts: Add CTS mode required for Kerberos AES support
Implement CTS wrapper for CBC mode required for support of AES
encryption support for Kerberos (rfc3962).

Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:23 +08:00
Sebastian Siewior 562954d5e0 [CRYPTO] tcrypt: Change the usage of the test vectors
The test routines (test_{cipher,hash,aead}) are makeing a copy
of the test template and are processing the encryption process
in place. This patch changes the creation of the copy so it will
work even if the source address of the input data isn't an array
inside of the template but a pointer.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Sebastian Siewior d5dc392742 [CRYPTO] tcrypt: Shrink speed templates
The speed templates as it look always the same. The key size
is repeated for each block size and we test always the same
block size. The addition of one inner loop makes it possible
to get rid of the struct and it is possible to use a tiny
u8 array :)

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:21 +08:00
Sebastian Siewior 477035c2ab [CRYPTO] tcrypt: Group common speed templates
Some crypto ciphers which are impleneted support similar key sizes
(16,24 & 32 byte). They can be grouped together and use a common
templatte instead of their own which contains the same data.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:21 +08:00
Herbert Xu 38ed9ab23b [CRYPTO] tcrypt: Make xcbc available as a standalone test
Currently the gcm(aes) tests have to be taken together with all other
algorithms.  This patch makes it available by itself at number 106.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:01 +11:00
Herbert Xu 2a999a3abb [CRYPTO] tcrypt: Zero axbuf in the right function
The axbuf buffer is used by test_aead and therefore should be zeroed
there instead of in test_hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:59 +11:00
Joy Latten 93cc74e078 [CRYPTO] tcrypt: Add CCM vectors
This patch adds 7 test vectors to tcrypt for CCM.
The test vectors are from rfc 3610.
There are about 10 more test vectors in RFC 3610
and 4 or 5 more in NIST. I can add these as time permits.

I also needed to set authsize. CCM has a prerequisite of
authsize. 

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:53 +11:00
Herbert Xu 5311f248b7 [CRYPTO] ctr: Refactor into ctr and rfc3686
As discussed previously, this patch moves the basic CTR functionality
into a chainable algorithm called ctr.  The IPsec-specific variant of
it is now placed on top with the name rfc3686.

So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec
variant will be called rfc3686(ctr(aes)).  This patch also adjusts
gcm accordingly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:41 +11:00
Tan Swee Heng 5de8f1b562 [CRYPTO] tcrypt: Added salsa20 speed test
This patch adds a simple speed test for salsa20.
Usage: modprobe tcrypt mode=206

Signed-of-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:36 +11:00
Zoltan Sogor 0b77abb3b2 [CRYPTO] lzo: Add LZO compression algorithm support
Add LZO compression algorithm support

Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:35 +11:00
Zoltan Sogor 91755a921c [CRYPTO] tcrypt: Add common compression tester function
Add common compression tester function
Modify deflate test case to use the common compressor test function

Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:34 +11:00
Herbert Xu 6160b28992 [CRYPTO] gcm: Fix ICV handling
The crypto_aead convention for ICVs is to include it directly in the
output.  If we decided to change this in future then we would make
the ICV (if the algorithm has an explicit one) available in the
request itself.

For now no algorithm needs this so this patch changes gcm to conform
to this convention.  It also adjusts the tcrypt aead tests to take
this into account.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:31 +11:00
Herbert Xu 8df213d9b5 [CRYPTO] tcrypt: Make gcm available as a standalone test
Currently the gcm(aes) tests have to be taken together with all other
ciphers.  This patch makes it available by itself at number 35.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:30 +11:00
Denis Cheng a10e11946b [CRYPTO] tcrypt: Use print_hex_dump from linux/kernel.h
These utilities implemented in lib/hexdump.c are more handy, please use this.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:27 +11:00
Tan Swee Heng 6d1a69d53a [CRYPTO] tcrypt: Support for large test vectors
Currently the number of entries in a cipher test vector template is
limited by TVMEMSIZE/sizeof(struct cipher_testvec). This patch
circumvents the problem by pointing cipher_tv to each entry in the
template, rather than the template itself.

Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:25 +11:00
Mikko Herranen 28db8e3e38 [CRYPTO] gcm: New algorithm
Add GCM/GMAC support to cryptoapi.

GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher
with a block size of 16.  The typical example is AES-GCM.

Signed-off-by: Mikko Herranen <mh1@iki.fi>
Reviewed-by: Mika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:23 +11:00
Mikko Herranen e3a4ea4fd2 [CRYPTO] tcrypt: Add aead support
Add AEAD support to tcrypt, needed by GCM.

Signed-off-by: Mikko Herranen <mh1@iki.fi>
Reviewed-by: Mika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:23 +11:00
Tan Swee Heng 2407d60872 [CRYPTO] salsa20: Salsa20 stream cipher
This patch implements the Salsa20 stream cipher using the blkcipher interface.

The core cipher code comes from Daniel Bernstein's submission to eSTREAM:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/

The test vectors comes from:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/

It has been tested successfully with "modprobe tcrypt mode=34" on an
UML instance.

Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:15 +11:00
Jonathan Lynch cd12fb906d [CRYPTO] sha256-generic: Extend sha256_generic.c to support SHA-224
Resubmitting this patch which extends sha256_generic.c to support SHA-224 as
described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231
is then supported through the hmac interface.

Patch includes test vectors for SHA-224 and HMAC-SHA-224.

SHA-224 chould be chosen as a hash algorithm when 112 bits of security
strength is required.

Patch generated against the 2.6.24-rc1 kernel and tested against
2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC.

Signed-off-by: Jonathan Lynch <jonathan.lynch@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:12 +11:00