Commit Graph

28 Commits

Author SHA1 Message Date
Bill Pemberton fdca21ad46 ASoC: Samsung: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 00:30:19 +09:00
Padmavathi Venna a08485d8fd ASoC: Samsung: Do not register samsung audio dma device as pdev
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a
platform_device. This didn't represent the hardware well, since there
was no separate hardware associated with this platform_device; it was a
virtual device with sole purpose to call snd_soc_register_platform().

This change removes the platform_device completely. Each Samsung DAI now
registers the ASoC 'platform' itself. Machine drivers are adjusted for
the new 'platform' name.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07 19:36:07 +09:00
Mark Brown f9372c9c06 ASoC: samsung: Add hookup of WM0010 on Speyside
The Speyside platform by default has a WM0010 fitted.  Now that we have
a public driver hook it up in the machine integration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25 13:53:15 +01:00
Mark Brown 26e6781155 ASoC: Use dai_fmt in Speyside
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16 20:00:00 +01:00
Axel Lin 095d79dc49 ASoC: samsung: Add .owner to struct snd_soc_card
Missed .owner of struct snd_soc_card will prevent the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22 11:04:18 +00:00
Mark Brown 3628137646 ASoC: Raise Speyside audio system clock rate to 512fs
To support advanced system functionality for additional components; the
actively used clocks will remain the same for current components. Also
factor the rate out to a single #define while we're at it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 12:59:11 +08:00
Mark Brown 162b187e19 Merge branch 'for-3.2' into for-3.3 2011-11-27 16:04:45 +00:00
Mark Brown 5b895eec11 ASoC: Correct name of Speyside Main Speaker widget
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27 16:03:51 +00:00
Mark Brown e00c3f555f ASoC: Convert Samsung directory to module_platform_driver
Saves some boilerplate code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-11-25 13:03:03 +00:00
Mark Brown 39afd66cea ASoC: Add fully_routed flag to Speyside machines
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 21:41:03 +00:00
Paul Gortmaker da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Mark Brown 45cf367e80 ASoC: Add line loads to the list of supported detections for Speyside
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-19 18:30:59 +01:00
Mark Brown da1c6ea6cf ASoC: Allow source specification for CODEC level sysclk
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock
sources. When the clock is the clock for a DAI we do not usually need to
identify which clock is being configured so can use clk_id for the source
clock but with CODEC wide system clocks we will need to specify both the
clock being configured and the source.

Add a source argument to the CODEC driver set_sysclk() operation to
reflect this. As this operation is not as widely used as the DAI
set_sysclk() operation the change is not very invasive. We probably
ought to go and make the same alternation for DAIs at some point.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31 09:57:35 +01:00
Mark Brown 68d5a59e0c ASoC: Allow userspace control of Speyside headphone output
In order to facilitate the widest range of use cases (especially things
like speakerphone) allow the headphone output to be enabled and disabled
by the application layer.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-12 11:49:08 +09:00
Mark Brown a9ba615134 ASoC: Rename WM8915 to WM8996
For marketing reasons the part will be called WM8996. In order to avoid
user confusion rename the driver to reflect this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08 14:30:37 +09:00
Mark Brown 995e54f5fe ASoC: Fix mismerge of Speyside set_bias_level_post()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-08 17:51:38 +01:00
Mark Brown 85e9e76638 ASoC: Manage Speyside system clocking only in bias management
Now that the CODEC driver supports it defer configuration of the system
clock until bias management which is a much more idiomatic place to do
system power control and makes things a lot more happy when we're using
both interfaces.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06 21:47:28 +01:00
Mark Brown d4c6005f8e ASoC: Add context parameter to card DAPM callbacks
The card callback will get called for each DAPM context in the card so it
can be useful for it to know which device is currently undergoing a
transition.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06 21:46:45 +01:00
Mark Brown 1e025a3692 ASoC: Update speyside audio driver for hardware revision 2
Revision 2 of the Speyside platform supplies a 32kHz clock on MCLK2 rather
than MCLK1.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-01 20:20:59 +01:00
Mark Brown b864a8c9dd ASoC: Don't specify the DMA driver for Speyside baseband link
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-27 22:33:12 +01:00
Mark Brown b7a5d14c60 ASoC: Mark Speyside widgets as ignoring suspend
Allow audio paths through the Speyside system to be kept active while the
system is suspended (for example, when on a voice call) by marking all the
external widgets and the DAI link to the WM1250-EV1 baseband module as
ignoring suspend.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:02:23 -07:00
Mark Brown 556e4fb1d8 ASoC: Add stub baseband link on Speyside
Demonstrate the connection of a baseband to the system. We add a DAI for
the link to the baseband. This will become visible to the application
layer - audio should be started from the application layer using an
application such as this:

   http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c

which starts up audio as for CPU based playback and record up to the point
where data is streamed.

Due to non-availability of baseband simulation hardware we reuse the
configuration for the CPU link with the CODEC acting as clock master,
allowing signals to be observed with a scope. A more standard system
would have separate configuration for the baseband with its own ops
structure and operations. Normally the baseband would be clock master
as the baseband audio will be synchronised to the external telephony
network.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:02:17 -07:00
Mark Brown ea0e60de38 ASoC: Add pin switches for fixed analogue inputs and outputs on Speyside
Pin switches enable direct control of the DAPM state from userspace,
enabling simple enabling and disabling of the path. This is especially
useful for outputs such as the speaker which are composed of several
physical devices as it allows them to be controlled as a group.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:02:12 -07:00
Mark Brown 68688e78ed ASoC: Add Speyside headset jack detection support
Speyside makes use of support the WM8915 has for detecting the polarity
of the microphone and ground connections on headsets, using a GPIO to
control the polarity of the ground connection and switching between the
two microphone bias supplies available on the device in order to do so.
As a result of this the detection support is more involved than for most
other CODECs, using a callback to configure the current polarity of the
jack and translate this into the board-specific connections required for
the current scenario.

On Android some additional work is required to hook this up to the
application layer as the Android HeadsetObserver monitors a custom
drivers/switch API rather than the standard Linux APIs.  This can be
done by either updating HeadsetObserver or modifying the ALSA core to
report via drivers/switch as well.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:02:06 -07:00
Mark Brown ea3e98e75a ASoC: Support the sub speaker driver on Speyside
Speyside includes a WM9081 configured as an external speaker driver taking
an analogue input from HPOUT2 on the WM8915 on the system. Add support for
this to the driver, using a prefix of "Sub" for the WM9081 controls to
ensure we avoid collisions with controls on the WM8915.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:02:01 -07:00
Mark Brown ea0a591a28 ASoC: Optimise clock management for WM8915 Speyside
Dynamically enable and disable the FLL on the WM8915, configuring the
system clock to 256fs for 48kHz when the device is active but reverting
to using the input 32.768kHz clock directly at other times to support
features such as jack detection with minimal power consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:01:57 -07:00
Mark Brown ecfb1adf5f ASoC: Add basic widgets for WM8915 Speyside
Provide widgets for the basic widgets connected directly to the WM8915
on Speyside - the headphones, speaker, digital and analogue microphones.
For the outputs this is just documentation, for the inputs this ensures
that the relevant microphone biases are enabled when they are in use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:01:52 -07:00
Mark Brown 9b8dc66fba ASoC: Initial audio support for Speyside on Cragganmore 6410
This is minimal code required to get audio out of the Speyside audio
subsystem on the Wolfson Cragganmore 6410 reference platform.  It sets
up the link between the CPU and AIF1 of the WM8915 on the system,
enabling audio playback via the headphone and speaker outputs of the
device (which require no further configuration except runtime).  It
allows verification of basic functionality of the system.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 10:01:30 -07:00