Commit Graph

15 Commits

Author SHA1 Message Date
Magnus Damm e499ada829 sh: pfc: Unlock register support
Add PFC support for a 32-bit unlock register. Needed to
drive the r8a7779 PFC that comes with a funky PMMR register.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 09:33:57 +09:00
Magnus Damm f78a26f55b sh: pfc: Variable bitfield width config register support
Add support for variable config reg hardware by adding
the macro PINMUX_CFG_REG_VAR(). The width of each bitfield
needs to be passed to the macro, and the correct space must
be consumed by each bitfield in the enum table following the
macro. Data registers still need to have fixed bitfields.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 09:33:55 +09:00
Magnus Damm 18925e118b sh: pfc: Add config_reg_helper() function
Add a helper function for shared config reg access
calculations. This allows us to reduce the amount
of duplicated code, and at the same time prepare
for a common place for future variable bitwidth
config reg support.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 09:33:52 +09:00
Magnus Damm ad4a07ff8d sh: pfc: Convert index to field and value pair
Update the way the PFC code is passing bitfield
selection between configure register functions.

Convert the code from using index only to bitfield
number and selected value. First step towards future
variable bitfield width support.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 09:33:51 +09:00
Magnus Damm 92554d97c6 sh: pfc: Add gpio_read_bit() for data register access
Introduce gpio_read_bit() for data register read access
and modify sh_gpio_get_value() to make use of the new
function instead of gpio_read_reg(). The purpose of
this change is to update the code to only use the
gpio_read_reg() function for config register access.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 09:33:50 +09:00
Magnus Damm b0e10211cb sh: pfc: ioremap() support
Add support for non-entity mapped PFC registers through
the use of struct resource and ioremap()/iounmap().

The PFC main data structure gets updated with a pointer
to a struct resources array that point out all register
windows used by the PFC instance. The register definitions
are kept as physical addresses but the PFC code will do
transparent conversion into virtual addresses whenever
register windows are specified using with struct resource.

To introduce as little performance penalty as possible the
virtual address of each data register is cached in memory.
The virtual address of each configuration register is however
calculated during run time. This because the configuration
is considered slow path so focus is instead put on keeping
memory foot print as small as possible.

The PFC register access  code is in this patch updated from
__raw_readN() / __raw_writeN() into ioreadN() / iowriteN().

This patch is needed to support the PFC block in r8a7779.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-09 18:07:15 +09:00
Magnus Damm ad2a8e7ea4 sh: pfc: Add GPIO IRQ support
Add GPIO IRQ support to the shared PFC code in drivers/sh/pfc.c

The enums pointed out by a certain GPIO will be matched against
a table for IRQ to enum mappings.

Only the shared PFC code is updated by this patch. SoC specific
changes are also needed to allow platforms to make use of this
feature.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 15:03:52 +09:00
Magnus Damm c63bcc6ff1 sh: pfc: get_config_reg() shift clean up
Clean up the f_width shift code in get_config_reg().

Reported-by: Ryusuke Sakato <ryusuke.sakato.bx@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 14:39:26 +09:00
Paul Mundt e8184a47c9 sh: pfc: Fix up BUG() triggered by gpiolib debugfs lookups.
The gpiolib debugfs entry takes a hammer approach and iterates over all
of the potential GPIOs, regardless of their type. The SH PFC code on the
other hand contains a variable mismash of input/output/function types
spread out sparsely, leading to situations where the debug code can
trigger an out of range enum for the type. Since we already have an error
path for out of range enums, we can just hand that up to the higher level
instead of the current BUG() behaviour.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 05:15:20 +09:00
Paul Mundt b72421d8aa sh: pfc: support pinmux deregistration.
Presently the pinmux code is a one-way thing, but there's nothing
preventing an unregistration if no one has grabbed any of the pins.
This will permit us to save a bit of memory on systems that require pin
demux for certain peripherals in the case where registration of those
peripherals fails, or they are otherwise not attached to the system.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 03:54:56 +09:00
Magnus Damm 50dd3145a5 sh: update PFC to allow any enum in MARK lists
This patch updates the PFC code with some clarifying
comments together with a functional change. The change
allows function type of GPIO to select any type of enum
in their MARK lists. Without this patch only function
type of enums are allowed in MARK lists.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 02:50:57 +09:00
Paul Mundt ca6f2d7faf sh: pfc: Fixup type mismatch in debug printks.
!!value works out to an int while we were still using %ld, so fix this up
and shut gcc up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09 15:51:27 +09:00
Paul Mundt fd2cb0ce74 sh: pfc: pr_info() -> pr_debug() cleanups.
For some reason this was using pr_info() nested under an ifdef DEBUG.
While this is appealing in that it circumvents the effort necessary to
change ones loglevel, it's not terribly practical. So, convert it over
to pr_debug().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:15:04 +09:00
Paul Mundt 9cdae914b2 sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
Now that the PFC code is exposed for other architectures, use the common
__raw_xxx() routines instead of the ctrl_xxx() ones. This will be needed
for ARM-based SH-Mobiles amongst others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:10:41 +09:00
Magnus Damm fae4339919 sh: Break out SuperH PFC code
This file breaks out the SuperH PFC code from
arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h
to drivers/sh/pfc.c + include/linux/sh_pfc.h.

Similar to the INTC stuff. The non-SuperH specific
file location makes it possible to share the code
between multiple architectures.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:53 +09:00