Update documentation and sample application to capture the 'status' byte
in backend version operation and new error types in backend firmware
update operation.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The backend processor may not be ready to return the version of firmware
it is running by the time AP requests for it. The greybus specification
is updated to return 1-byte 'status' to return the error type, RETRY is
one of them.
This patch implements that in greybus now.
Note that the version structure was common across interface and backend
version requests earlier, but that is changing as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The specification got updated with two more status values, add their
support in greybus.
As retry isn't really an error, skip printing error messages for it as
well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
S2 Loader doesn't support runtime PM operations currently and we will
fail to suspend/resume the bundle for firmware management protocols.
Once that happens, the bundle and its connections will be pretty much
useless as we would have tried to disable/enable all connections during
such an operation and the S2 loader doesn't expect the connections to go
away during normal operation (except in the case of mode-switch).
This patch defines a new quirk GB_INTERFACE_QUIRK_NO_PM and uses a new
interface init status value (GB_INIT_S2_LOADER_INITIALIZED) which will
be advertised by S2 Loader now in the init status.
After detecting the currently running stage as S2 Loader, the kernel
wouldn't attempt suspending or resuming the bundle.
Reviewed-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Its a special quirk just for the bootrom as it doesn't have any PM
operations implemented. As the greybus bootrom bundle driver doesn't try
to do any PM stuff, this quirk is used only to skip bundle activate
operation currently.
Rename the GB_INTERFACE_QUIRK_NO_PM quirk to
GB_INTERFACE_QUIRK_NO_BUNDLE_ACTIVATE to suit its purpose better as the
GB_INTERFACE_QUIRK_NO_PM will be used for other quirk now.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch implements runtime PM support for firmware management bundle.
This guarantees that the bundle will be active, while the AP or the
Module is trying to exchange any operations over any of the CPorts.
- Firmware Management CPort:
Runtime PM get/put calls are placed around the ioctl calls, which are
all implemented as blocking ioctls.
- Component Authentication CPort:
Runtime PM get/put calls are placed around the ioctl calls, which are
all implemented as blocking ioctls.
- SPI:
Uses the interface provided by spilib.c and runtime PM get/put are
called around connection usage.
- firmware-download:
This is the most tricky one. All operations on this CPort are
initiated from the Module and not from the AP. And the AP needs to do
runtime_pm_get() before any request is received over this CPort.
The module doesn't send any request over this connection, unless the
AP has requested the module over firmware management CPort to download
a firmware package over firmware download CPort.
And so the runtime PM get/put calls around the ioctls in
fw-management.c are sufficient to handle the firmware management CPort
as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up the incoming request handler somewhat by passing a properly
aligned header and dropping the now redundant id and type parameters.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The response-received tracepoint is currently broken. Instead of parsing
the received message header it was tracing a bunch of zeroed fields from
an uninitialised response buffer.
Fix this by moving the tracepoint after were the response buffer is
initialised.
Fixes: 7cb496e6890e ("greybus: tracing: fix message traces")
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The operation type included in the error message printed for malformed
responses has never been correct. An uninitialised buffer was used to
retrieve the type, resulting in the type always being reported as 0.
Fix this by passing a properly aligned header to the response handler,
and drop the now redundant id and result parameters.
Fixes: cb0ef0c019ab ("operation: print message type on errors")
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Modify HID greybus driver to support runtime PM framework.
The suspend and resume fucntion have been test with tutorial-hid,
e-ink-display and gpbridge-test image by sysfs resume, all HID
buttons work well on suspend/resume.
Testing Done: Compiled and verified on EVT2, DB3.5, GPB test module
with daughter board, Red module.
Signed-off-by: Philip Yang <yang_philip@projectara.com>
Reviewed-by: David Lin <dtwlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The download_firmware() function isn't downloading the firmware but just
finding if one is available or not. The same applies to the error
message printed by it.
Replace 'download' with 'find' to make it sound better.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We set timeouts using gb_bootrom_set_timeout(), which hides the internal
implementation, i.e. workqueues.
While canceling timeouts, we do cancel_delayed_work_sync(), which
exposes the internal implementation and doesn't look that clean.
Create gb_bootrom_cancel_timeout() to hide the internal implementation
here as well.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A special race is observed in the case where the phone boots with
modules attached to it.
In that case, the AP processes a later FIRMWARE_SIZE request from the
bootrom, before processing the response to the earlier AP_READY request.
And because of that, we set the timeout from gb_bootrom_probe() after
trying to cancel it from gb_bootrom_firmware_size_request().
And with that, if the firmware package isn't available for the kernel to
directly read from, then we get a timeout print message like below:
[ 23.669764] bootrom 1-3.3.1: Firmware file 'ara_00000126_00001001_fffe0001_ffe5001a_s2l.tftf' requested
[ 24.680528] bootrom 1-3.3.1: Timed out waiting for Firmware Size Request from the Module
Note that this doesn't happen if the module is inserted into the frame,
after the phone is already booted.
This behavior is the result of an earlier commit cdd1cb3f4943
("operation: add completion work queue").
This perhaps happens only at boot time because the UNBOUND wq
(connection->wq) gets a chance to run on other CPUs, while the BOUND wq
(gb_operation_completion_wq) doesn't at that stage (24 seconds since
boot).
Setting the timeout before sending the AP_READY request fixes it for
now.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On failing to find a firmware image, we get these today:
bootrom 1-3.3.1: Firmware request for ara_00000126_00001001_fffe0001_ffe5001a_s2l.tftf has failed : -12
bootrom 1-3.3.1: gb_bootrom_firmware_size_request: failed to download firmware (-12)
Which are more or less duplicate, as they print error for the same root
cause.
With this patch this is all we get now:
bootrom 1-3.3.1: failed to download ara_00000126_00001001_fffe0001_ffe5001a_s2l.tftf firmware (-12)
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The currently set value of next_request_type in the error path of
gb_bootrom_firmware_size_request() is not correct, as it should have
been NEXT_REQ_FIRMWARE_SIZE for the failure case (as we should be
waiting for another similar request).
But, if an error occurs in gb_bootrom_firmware_size_request(), then the
ES3 bootrom will never be able to recover from it and send another
request. And so there is no point waiting for another request and timing
out.
Skip doing that in error path.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Integrate greybus drivers with the Linux Kernel RuntimePM framework
for vibrator driver.
Testing Done: AP side (kernel) can control the vibrator driver with
suspend and resume.
Signed-off-by: Ann Chen <chen_ann@projectara.com>
Reviewed-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The new power management specific operations added to the control
protocol do not print the bundle-id in the error messages and it is not
possible to identify which bundle-id the operation failed for.
Fix that and do minor rewriting of the print messages to make them more
readable.
Tested on EVT 2.0 with gpbridge-test module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In case of a synchronous operation timeout error, it's helpful for
purpose of debugging to print the operation id in the error message, so
that we know if the response is received at a later time after operation
time out.
Testing Done:
- Observe the error message below when response comes later after
operation timeout:
[ 792.973978] greybus greybus1: 0/0:0: synchronous operation id 0x0005
of type 0x21 failed: -110
[ 800.646694] greybus greybus1: 0/0:0: unexpected response id 0x0005
received
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It is suggested to avoid using ARA keyword externally. So we need to
update GB codec driver. Also, codec name is currently set to 'gb-codec'.
However, it makes more sense to name it as apb-dummy-codec, since it is
used to control various audio modules connected to APB via greybus.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
spilib is used by multiple users currently (spi.c and fw-core.c) but
commit aa52b62a0556 broke that hierarchy and introduced gbphy dependent
code in spilib.
This may have unreliable consequences as we are doing following
operation unconditionally now:
gbphy_dev = to_gbphy_dev(spi->parent);
gbphy_runtime_get_sync(gbphy_dev);
which may not go well when the parent is of type &bundle->dev
(fw-core.c).
This patch introduces spilib_ops and lets the users of the core register
them. This shall have no functional change for the spi.c usecase and
shall fix the unreliable results for the fw-core.c usecase.
Tested by writing to mtd0 dev and verifying (with print messages) that
the below routines are getting called for a gpbridge-test module.
Fixes: aa52b62a0556 ("spi: Add runtime_pm support")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It can take arguments not and we can perform all the operations with a
single binary, sorry for missing that initially.
Usage: ./firmware <gb-fw-mgmt-X> <type: interface/backend> <firmware-tag> <timeout>
And all of them have default values, etc.
Tested with a semco 13 MP module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently frametime are being printed whenever an Interface is
runtime-resumed. This is unnecessarily chatty. This patch moves the
frametime print from using pr_info() to dev_dbg().
Testing Done:
- $ echo "module greybus +p" > /d/dynamic_debug/control
[ 97.699395] greybus 1-svc: greybus frametime: ap=2042778707
1-svc=2042775185 greybus1=2042778397 1-6.6=2042778390
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The firmware now keeps the underlying hardware disabled until
receiving the first Bundle Activate request. Additionally: requesting
transition to a state the bundle is already in is no longer an error.
We can now add proper error handling to the bundle activate call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We always knew backward compatibility with the ES3 bootrom, which was
finalised about a year ago, would be a pain. Here we go again.
The bootrom does not support control requests added after it was burnt
into ROM for obvious reasons. This means that we need to suppress
sending the new bundle_activate() operation to any interface executing
the legacy bootrom.
Do so by adding a new NO_PM interface quirk (we can use the
control-protocol version for this later once we bump it).
Note that the interface-disable path (e.g. for power down) is already
handled by the FORCED_DISABLE quirk, and that the suspend/resume
paths are currently avoided by making sure that the bootrom bundle
never suspends.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Replace prefix "ara_" with prefix "gmp_" for TFTF firmware filenames.
Testing Done: compiled and flashed EVT2 (bootimage) and tested that
"gmp_" prefixed tftf files are expected. Pushed one from
FDK and checked that it's properly loaded.
Signed-off-by: Joel Porquet <porquet_joel@projectara.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
All interfaces, regardless of type, should have an interface_id
attribute reflecting its position on the frame.
This has been reported to cause an assertion failure in libmoduleutil
for dummy modules.
Testing done: Verified that the attribute is present for registered
dummy interfaces.
Reported-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently the probe() function contains the asynchronous() variant of
FrameTime synchronization. This patch converts to the synchronous() version
of synchronization. This is required for two reasons first a probe() cannot
reasonably be considered to be complete without successfully completing a
time synchronization for Interfaces that care about that sync. Secondly
scheduling the operation asynchronously means its possible the PM-runtime
suspend() path can execute before the async timesync operation completes.
For both reasons we want to run synchronization - synchronously.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
To make sure tests on all devices, enabled or not, are cancelled,
specify -f when starting new loopback test.
Signed-off-by: Ryan Lim <limryan@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The -z argument was missing the break statement needed in the switch
block and was not in the getopt list.
Signed-off-by: Ryan Lim <limryan@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
When starting a loopback test, it cancels all currently running tests on
all loopback devices. When -m argument is given, which runs the test on
specific loopback devices, only the tests running on the selected
devices need to be cancelled before starting new tests.
Signed-off-by: Ryan Lim <limryan@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently we have a long initial delay when initiating the first operation
to synchronize the FrameTime. That made sense during development of the
feature since we did synchronization asynchronously and wanted to give some
grace time for new Interfaces to be added before initiating a new
synchronization. On the PM runtime resume path though we do a synchronous
restoration of FrameTime and in this case waiting for 1 second before
initiating the first operation is clearly wrong.
This patch reduces the initial operation time bringing the synchronous call
time down by 990 milliseconds.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The firmware prefix is hard-coded in a few different places. Put it all
in one handy #define, for when/if we ever decide to change it in the
future...
Testing: 'strings gb-firmware.ko gb-bootrom.ko | grep ara_' produced the
same output before and after this patch.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
To be well-behaved, we should hibernate the link before disabling UniPro
in case the link has already been established (i.e. when the interface
type has been detected as UniPro or Greybus).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reword the power_state attribute documentation to make it clear that an
attempt to boot and possibly enumerate an interface is made when writing
"on" to the file, and that on errors the interface will again be powered
down.
Drop the incorrect claim that writing the currently read value has no
effect, since no such guarantees can be made (e.g. several writers may
be sleeping on the interface mutex).
Also fix some minor language issues.
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
User space needs the capability of powering ON or OFF an Interface for
multiple use cases. For example, userspace may want an Interface
currently in its S3 boot stage, to boot into its S2 Loader stage to
update the bridge SPI flash. Or the Interface is running its S2 Loader
stage and updated the SPI flash with the new S2 Loader firmware and
wants to boot into the new S2 Loader firmware.
Another use case can be, Android wants to disable (not eject) a
misbehaving module.
Add a 'power_state' sysfs file within the interface directory. It can be
read to know the current power state of the Interface and can be written
to power ON or power OFF an Interface. Possible values that can be
written or read from it are: "on" and "off".
Testing Done: Tested by enabling/disabling camera module on EVT 2.0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
CC: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
[johan: drop es3-quirk duplication, add to power attribute group, fix
return value, drop tags ]
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make sure to prevent an interface that is going away from being
reactivated.
This is needed to preemptively close a race between the upcoming feature
to reactivate a powered-down interface and physical removal (i.e.
module_removed event processing) as well as logical removal (e.g. the
current system-suspend hack).
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
An interface is not expected to change its type after a power down and
reactivation so make sure to treat that as a fatal error.
This is complicated by the current Toshiba ES3 hack which requires us
to retry activation as Greybus interfaces are sometimes misdetected as
UniPro interfaces. Handle that by only retrying activation the first
time an interface is activated, and for interfaces already detected as
having Greybus type.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up the ES3 activation retry-hack and isolate it in the interface
code.
This way the retry hack can be reused when we soon start allowing
interfaces to be reactivated after having been powered down.
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It will soon be possible to reactivate an interface that has been
powered down after already having been activated. In that case there's
no need to re-read the DME attributes as part of activation as the
values are already cached.
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use an enum for the interface type instead of using the SVC protocol
values directly.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We currently handle dummy interfaces by deactivating them using
activation error paths, but we don't want the corresponding
module_inserted error message to be printed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Amend the interface registration message with the detected interface
type, and only print the Ara VID/PID and DDBL1 attributes for the types
for which they exist.
Also drop the now redundant message about a detected dummy interface
from the activate operation helper.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make most interface attributes type dependent (e.g only UniPro and
Greybus interfaces should have a DDBL1 Manufacturer ID attribute).
Note that the power attributes (e.g. current_now) will only be visible
for UniPro- and Greybus-type interfaces (i.e. interfaces that can draw
power).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Partition the current attribute group into four groups for UniPro,
Greybus, power and common attributes.
This is a step in refining the interface-type handling as attributes are
type dependent.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add an interface-type string attribute that represents the detected
interface type as either "dummy", "unipro", "greybus", or "unknown".
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Disable wake_detect interrupt after request
As part of SW-4344/SW-7061, now we are enabling FW flashing
to all builds. That means check for need of FW upgrade is
going to be present in all builds, and moving to FW_FlASHING
mode from active is heavy operation; so the idea here is
simplify this process and save the boot time due to switching
back-n-forth between ACTIVE<=>FW_FLASHING modes.
So we decided to put unipro into OFF state by default on boot,
which can be changed through DT property. If arche-platform
device node has "arche,init-off" property set, then unipro
will be in OFF state on boot. User can bring it back by
# echo active > /sys/devices/arche_platform*/state
And to simply the exit code of probe() fn the
arche_platform_coldboot_seq() has been shifted to the
bottom of the _probe() fn.
Testing Done: Tested on EVT2 platform, with and without
"arche,init-off" property, multiple times.
Note: I am seeing SW-7128, which is not related to these changes.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Connection tear down is being reworked, and the SVC quiescing operation
is going away.
Let's remove this operation now along with the coupled second ping from
our intermediate tear down implementation.
This both avoids unnecessary noise in the logs resulting from the fact
that the SVC side of the quiescing operation was never merged, and
speeds up connection tear down slightly.
Testing done: Tested on EVT2 using runtime PM.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Core sd/mmc needs the start_signal_voltage_switch operation to be
defined to issue a voltage switch command. So, we define it here even
though we do not need to take in action on it, since all voltage control
is done in the Module.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We need to convert vdd kernel values to greybus ones. And we get this by
shifting the kernel values by 8.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The S3 firmware and S3-BFU firmware images will be named like this going
forward:
S3: ara_00000126_00001001_fffe0001_ffe70018_s3f.tftf
S3-BFU: ara_00000126_00001001_fffe0001_ffe70018_s3_bfu.tftf
But the current naming for S2 loader image is:
ara_00000126_00001001_fffe0001_ffe70018_02.tftf
It makes sense to use similar encoding for all three packages and so it
should be named as:
ara_00000126_00001001_fffe0001_ffe70018_s2l.tftf
Because the boot stage is passed from ES3 bootrom, we can't change its
value now. But the string created to match the package name is created
in bootrom.c and that is the only string we create from bootrom.c.
Update bootrom.c to use "s2l" instead of "02" in the package name.
Compile Tested only.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Karthik Ravi Shankar <karthikrs@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar
Johan Hovold
Philip Yang
Ann Chen
David Lin
Vaibhav Agarwal
Bartosz Golaszewski
Joel Porquet
Bryan O'Donoghue
Ryan Lim
Greg Kroah-Hartman
Vaibhav Hiremath
Rui Miguel Silva