Commit Graph

16 Commits

Author SHA1 Message Date
Michael Ellerman b6f35b4966 [POWERPC] Make crash.c work on 32-bit and 64-bit
To compile kexec on 32-bit we need a few more bits and pieces. Rather
than add empty definitions, we can make crash.c work on 32-bit, with
only a couple of kludges.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17 16:41:10 +10:00
David Wilder c0ce7d0886 [POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
With this patch, kdump uses the firmware soft-reset NMI for two purposes:
1) Initiate the kdump (take a crash dump) by issuing a soft-reset.
2) Break a CPU out of a deadlock condition that is detected during kdump
processing.

When a soft-reset is initiated each CPU will enter
system_reset_exception() and set its corresponding bit in the global
bit-array cpus_in_sr then call die(). When die() finds the CPU's bit set
in cpu_in_sr crash_kexec() is called to initiate a crash dump. The first
CPU to enter crash_kexec() is called the "crashing CPU". All other CPUs
are "secondary CPUs". The secondary CPU's pass through to
crash_kexec_secondary() and sleep. The crashing CPU waits for all CPUs
to enter via soft-reset then boots the kdump kernel (see
crash_soft_reset_check())

When the system crashes due to a panic or exception, crash_kexec() is
called by panic() or die(). The crashing CPU sends an IPI to all other
CPUs to notify them of the pending shutdown. If a CPU is in a deadlock
or hung state with interrupts disabled, the IPI will not be delivered.
The result being, that the kdump kernel is not booted. This problem is
solved with the use of a firmware generated soft-reset. After the
crashing_cpu has issued the IPI, it waits for 10 sec for all CPUs to
enter crash_ipi_callback(). A CPU signifies its entry to
crash_ipi_callback() by setting its corresponding bit in the
cpus_in_crash bit array. After 10 sec, if one or more CPUs have not set
their bit in cpus_in_crash we assume that the CPU(s) is deadlocked. The
operator is then prompted to generate a soft-reset to break the
deadlock. Each CPU enters the soft reset handler as described above.

Two conditions must be handled at this point:
1) The system crashed because the operator generated a soft-reset. See
2) The system had crashed before the soft-reset was generated ( in the
case of a Panic or oops).

The first CPU to enter crash_kexec() uses the state of the kexec_lock to
determine this state. If kexec_lock is already held then condition 2 is
true and crash_kexec_secondary() is called, else; this CPU is flagged as
the crashing CPU, the kexec_lock is acquired and crash_kexec() proceeds
as described above.

Each additional CPUs responding to the soft-reset will pass through
crash_kexec() to kexec_secondary(). All secondary CPUs call
crash_ipi_callback() readying them self's for the shutdown. When ready
they clear their bit in cpus_in_sr. The crashing CPU waits in
kexec_secondary() until all other CPUs have cleared their bits in
cpus_in_sr. The kexec kernel boot is then started.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 15:18:52 +10:00
Michael Ellerman aa98c50dcb [POWERPC] Make kexec_setup() a regular initcall
There's no reason kexec_setup() needs to be called explicitly from
setup_system(), it can just be a regular initcall.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:47 +10:00
Michael Ellerman 35dd54326e [PATCH] powerpc: Move crashkernel= handling into the kernel.
This was missing a quilt ref.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:18 +10:00
Michael Ellerman 2babf5c2ec [PATCH] powerpc: Unify mem= handling
We currently do mem= handling in three seperate places. And as benh pointed out
I wrote two of them. Now that we parse command line parameters earlier we can
clean this mess up.

Moving the parsing out of prom_init means the device tree might be allocated
above the memory limit. If that happens we'd have to move it. As it happens
we already have logic to do that for kdump, so just genericise it.

This also means we might have reserved regions above the memory limit, if we
do the bootmem allocator will blow up, so we have to modify
lmb_enforce_memory_limit() to truncate the reserves as well.

Tested on P5 LPAR, iSeries, F50, 44p. Tested moving device tree on P5 and
44p and F50.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:15 +10:00
Michael Matz 2ec5e3a867 [PATCH] fix kexec asm
While testing kexec and kdump we hit problems where the new kernel would
freeze or instantly reboot.  The easiest way to trigger it was to kexec a
kernel compiled for CONFIG_M586 on an athlon cpu.  Compiling for CONFIG_MK7
instead would work fine.

The patch fixes a few problems with the kexec inline asm.

Signed-off-by: Chris Mason <mason@suse.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08 14:15:04 -08:00
Albert Herranz 39931e41be [PATCH] powerpc: fix for kexec ppc32
- kexec.h is included from assembly code, thus C code must be properly
  protected.

- (embedded) ppc32 systems use machine_kexec_simple whose declaration
  vanished during a recent powerpc merge change.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: <fastboot@osdl.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Haren Myneni 8385a6a3ac [PATCH] powerpc: Fix kdump copy regs and dynamic allocate per-cpu crash notes
- This contains the arch specific changes for the following the
kdump generic fixes which were already accepted in the upstream.
       .   Capturing CPU registers (for the case of 'panic' and invoking
the dump using 'sysrq-trigger') from a function (stack frame) which will
be not be available during the kdump boot. Hence, might result in
invalid stack trace.
       .   Dynamically allocating per cpu ELF notes section instead of
statically for NR_CPUS.

- Fix the compiler warning in prom_init.c.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:14:42 +11:00
akpm@osdl.org bf2083050d [PATCH] Kdump: powerpc and s390 build failure fix
)

From: Vivek Goyal <vgoyal@in.ibm.com>

crash_setup_regs() is an architecture dependent function which is called in
architecture independent section.  So every architecture supporting kexec
should at least provide a dummy definition of crash_setup_regs() even if
crash dumping is not implemented yet, to avoid build failures.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:27 -08:00
Vivek Goyal cc57165874 [PATCH] kdump: dynamic per cpu allocation of memory for saving cpu registers
- In case of system crash, current state of cpu registers is saved in memory
  in elf note format.  So far memory for storing elf notes was being allocated
  statically for NR_CPUS.

- This patch introduces dynamic allocation of memory for storing elf notes.
  It uses alloc_percpu() interface.  This should lead to better memory usage.

- Introduced based on Andi Kleen's and Eric W. Biederman's suggestions.

- This patch also moves memory allocation for elf notes from architecture
  dependent portion to architecture independent portion.  Now crash_notes is
  architecture independent.  The whole idea is that size of memory to be
  allocated per cpu (MAX_NOTE_BYTES) can be architecture dependent and
  allocation of this memory can be architecture independent.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:26 -08:00
Arnd Bergmann 88ced03149 [PATCH] powerpc: sanitize header files for user space includes
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that
are not meant for use by user space, include/asm-powerpc does
not have this yet.

This patch gets us a lot closer there. There are a few cases
where I was not sure, so I left them out. I have verified
that no CONFIG_* symbols are used outside of __KERNEL__
any more and that there are no obvious compile errors when
including any of the headers in user space libraries.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:13:08 +11:00
Michael Ellerman 54c32021eb [PATCH] powerpc: Add arch-dependent copy_oldmem_page
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:35 +11:00
Michael Ellerman cc53291521 [PATCH] powerpc: Add arch dependent basic infrastructure for Kdump.
Implementing the machine_crash_shutdown which will be called by
crash_kexec (called in case of a panic, sysrq etc.). Disable the
interrupts, shootdown cpus using debugger IPI and collect regs
for all CPUs.

elfcorehdr= specifies the location of elf core header stored by
the crashed kernel. This command line option will be passed by
the kexec-tools to capture kernel.

savemaxmem= specifies the actual memory size that the first kernel
has and this value will be used for dumping in the capture kernel.
This command line option will be passed by the kexec-tools to
capture kernel.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:28 +11:00
Michael Ellerman 3d1229d6ae [PATCH] powerpc: Merge kexec
This patch merges, to some extent, the PPC32 and PPC64 kexec implementations.

We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions.
The current PPC64 implementation becomes the "default" implementation for PPC64
which platforms can select if they need no special treatment.

I've added these default callbacks to pseries/maple/cell/powermac, this means
iSeries no longer supports kexec - but it never worked anyway.

I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with
PPC64. Judging by the comments it might be better named machine_kexec_non_of,
or something, but at the moment it's the only implementation for PPC32 so it's
the "default".

Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we
already have in setup-common.c on powerpc. All this does is call
ppc_md.nvram_sync, which only powermac implements, so instead make
machine_shutdown a ppc_md member and have it call core99_nvram_sync directly
on powermac.

I've also stuck relocate_kernel.S into misc_32.S for powerpc.

Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on
P5 LPAR and successfully kexec'ed.

Should apply on top of 493f25ef40.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:48:52 +11:00
Michael Ellerman 593e537b93 [PATCH] powerpc: Export htab start/end via device tree
The userspace kexec-tools need to know the location of the htab on non-lpar
machines, as well as the end of the kernel. Export via the device tree.

NB. This patch has been updated to use "linux,x" property names. You may
need to update your kexec-tools to match.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 16:34:06 +11:00
Michael Ellerman e1df870d54 powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h.

The only thing that's really changed is that we now allocate crash_notes
properly on PPC32. It's address is exported via sysfs, so it's not correct
for it to be a pointer.

I've also removed some of the "we don't use this" comments, because they're
wrong (or perhaps were referring only to arch code).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:35:45 +11:00