Commit Graph

279 Commits

Author SHA1 Message Date
Al Viro cfbdbab063 [PATCH] net/sunrpc/auth_gss/svcauth_gss.c endianness regression
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10 15:37:24 -07:00
NeilBrown c6b0a9f87b [PATCH] knfsd: tidy up up meaning of 'buffer size' in nfsd/sunrpc
There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received.  In
other cases it is the largest 'payload' that can be included in a NFS
message.

In either case, it is not possible for both the request and the reply to be
this large.  One of the request or reply may only be one page long, which
fits nicely with NFS.

So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'.  Max_payload is the size that the server requests.  It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.

max_mesg is the largest single message that can be sent or received.  It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead.  Only one of the request and reply may be
this size.  The other must be at most one page.

Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
J.Bruce Fields 8f8e05c570 [PATCH] knfsd: svcrpc: use consistent variable name for the reply state
The rpc reply has multiple levels of error returns.  The code here contributes
to the confusion by using "accept_statp" for a pointer to what the rfc (and
wireshark, etc.) refer to as the "reply_stat".  (The confusion is compounded
by the fact that the rfc also has an "accept_stat" which follows the
reply_stat in the succesful case.)

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:19 -07:00
J.Bruce Fields 5b304bc5bf [PATCH] knfsd: svcrpc: gss: fix failure on SVC_DENIED in integrity case
If the request is denied after gss_accept was called, we shouldn't try to wrap
the reply.  We were checking the accept_stat but not the reply_stat.

To check the reply_stat in _release, we need a pointer to before (rather than
after) the verifier, so modify body_start appropriately.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:19 -07:00
J.Bruce Fields 3c15a48664 [PATCH] knfsd: svcrpc: gss: factor out some common wrapping code
Factor out some common code from the integrity and privacy cases.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:19 -07:00
Olaf Kirch bc5fea4299 [PATCH] knfsd: register all RPC programs with portmapper by default
The NFSACL patches introduced support for multiple RPC services listening on
the same transport.  However, only the first of these services was registered
with portmapper.  This was perfectly fine for nfsacl, as you traditionally do
not want these to show up in a portmapper listing.

The patch below changes the default behavior to always register all services
listening on a given transport, but retains the old behavior for nfsacl
services.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:19 -07:00
Greg Banks 7b2b1fee30 [PATCH] knfsd: knfsd: cache ipmap per TCP socket
Speed up high call-rate workloads by caching the struct ip_map for the peer on
the connected struct svc_sock instead of looking it up in the ip_map cache
hashtable on every call.  This helps workloads using AUTH_SYS authentication
over TCP.

Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16
synthetic client threads simulating an rsync (i.e.  recursive directory
listing) workload reading from an i386 RH9 install image (161480 regular files
in 10841 directories) on the server.  That tree is small enough to fill in the
server's RAM so no disk traffic was involved.  This setup gives a sustained
call rate in excess of 60000 calls/sec before being CPU-bound on the server.

Profiling showed strcmp(), called from ip_map_match(), was taking 4.8% of each
CPU, and ip_map_lookup() was taking 2.9%.  This patch drops both contribution
into the profile noise.

Note that the above result overstates this value of this patch for most
workloads.  The synthetic clients are all using separate IP addresses, so
there are 64 entries in the ip_map cache hash.  Because the kernel measured
contained the bug fixed in commit

commit 1f1e030bf7

and was running on 64bit little-endian machine, probably all of those 64
entries were on a single chain, thus increasing the cost of ip_map_lookup().

With a modern kernel you would need more clients to see the same amount of
performance improvement.  This patch has helped to scale knfsd to handle a
deployment with 2000 NFS clients.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:16 -07:00
Greg Banks 7adae489fe [PATCH] knfsd: Prepare knfsd for support of rsize/wsize of up to 1MB, over TCP
The limit over UDP remains at 32K.  Also, make some of the apparently
arbitrary sizing constants clearer.

The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp.  This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.

Note that we don't actually increase sv_bufsz for nfs yet.  That comes next.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:16 -07:00
NeilBrown 3cc03b164c [PATCH] knfsd: Avoid excess stack usage in svc_tcp_recvfrom
..  by allocating the array of 'kvec' in 'struct svc_rqst'.

As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer
allocate an array of this size on the stack.  So we allocate it in 'struct
svc_rqst'.

However svc_rqst contains (indirectly) an array of the same type and size
(actually several, but they are in a union).  So rather than waste space, we
move those arrays out of the separately allocated union and into svc_rqst to
share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at
different times, so there is no conflict).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
NeilBrown 4452435948 [PATCH] knfsd: Replace two page lists in struct svc_rqst with one
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256.  This
means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES.

struct svc_rqst contains two such arrays.  However the there are never more
that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is
needed.

The two arrays are for the pages holding the request, and the pages holding
the reply.  Instead of two arrays, we can simply keep an index into where the
first reply page is.

This patch also removes a number of small inline functions that probably
server to obscure what is going on rather than clarify it, and opencode the
needed functionality.

Also remove the 'rq_restailpage' variable as it is *always* 0.  i.e.  if the
response 'xdr' structure has a non-empty tail it is always in the same pages
as the head.

 check counters are initilised and incr properly
 check for consistant usage of ++ etc
 maybe extra some inlines for common approach
 general review

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Magnus Maatta <novell@kiruna.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
NeilBrown 5680c44632 [PATCH] knfsd: Fixed handling of lockd fail when adding nfsd socket
Arrgg..  We cannot 'lockd_up' before 'svc_addsock' as we don't know the
protocol yet....  So switch it around again and save the name of the created
sockets so that it can be closed if lock_up fails.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
NeilBrown 37a034729a [PATCH] knfsd: call lockd_down when closing a socket via a write to nfsd/portlist
The refcount that nfsd holds on lockd is based on the number of open sockets.
So when we close a socket, we should decrement the ref (with lockd_down).

Currently when a socket is closed via writing to the portlist file, that
doesn't happen.

So: make sure we get an error return if the socket that was requested does is
not found, and call lockd_down if it was.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
Uwe Zeisberger f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Serge E. Hallyn e9ff3990f0 [PATCH] namespaces: utsname: switch to using uts namespaces
Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Greg Banks bfd241600a [PATCH] knfsd: make rpc threads pools numa aware
Actually implement multiple pools.  On NUMA machines, allocate a svc_pool per
NUMA node; on SMP a svc_pool per CPU; otherwise a single global pool.  Enqueue
sockets on the svc_pool corresponding to the CPU on which the socket bh is run
(i.e.  the NIC interrupt CPU).  Threads have their cpu mask set to limit them
to the CPUs in the svc_pool that owns them.

This is the patch that allows an Altix to scale NFS traffic linearly
beyond 4 CPUs and 4 NICs.

Incorporates changes and feedback from Neil Brown, Trond Myklebust, and
Christoph Hellwig.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:20 -07:00
Greg Banks a74554429e [PATCH] knfsd: add svc_set_num_threads
Currently knfsd keeps its own list of all nfsd threads in nfssvc.c; add a new
way of managing the list of all threads in a svc_serv.  Add
svc_create_pooled() to allow creation of a svc_serv whose threads are managed
by the sunrpc code.  Add svc_set_num_threads() to manage the number of threads
in a service, either per-pool or globally across the service.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks 3262c816a3 [PATCH] knfsd: split svc_serv into pools
Split out the list of idle threads and pending sockets from svc_serv into a
new svc_pool structure, and allocate a fixed number (in this patch, 1) of
pools per svc_serv.  The new structure contains a lock which takes over
several of the duties of svc_serv->sv_lock, which is now relegated to
protecting only sv_tempsocks, sv_permsocks, and sv_tmpcnt in svc_serv.

The point is to move the hottest fields out of svc_serv and into svc_pool,
allowing a following patch to arrange for a svc_pool per NUMA node or per CPU.
 This is a major step towards making the NFS server NUMA-friendly.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks c081a0c7cf [PATCH] knfsd: test and set SK_BUSY atomically
The SK_BUSY bit in svc_sock->sk_flags ensures that we do not attempt to
enqueue a socket twice.  Currently, setting and clearing the bit is protected
by svc_serv->sv_lock.  As I intend to reduce the data that the lock protects
so it's not held when svc_sock_enqueue() tests and sets SK_BUSY, that test and
set needs to be atomic.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks 5685f0fa1c [PATCH] knfsd: convert sk_reserved to atomic_t
Convert the svc_sock->sk_reserved variable from an int protected by
svc_serv->sv_lock, to an atomic.  This reduces (by 1) the number of places we
need to take the (effectively global) svc_serv->sv_lock.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks 1a68d952af [PATCH] knfsd: use new lock for svc_sock deferred list
Protect the svc_sock->sk_deferred list with a new lock svc_sock->sk_defer_lock
instead of svc_serv->sv_lock.  Using the more fine-grained lock reduces the
number of places we need to take the svc_serv lock.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks c45c357d7d [PATCH] knfsd: convert sk_inuse to atomic_t
Convert the svc_sock->sk_inuse counter from an int protected by
svc_serv->sv_lock, to an atomic.  This reduces the number of places we need to
take the (effectively global) svc_serv->sv_lock.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
Greg Banks 36bdfc8bae [PATCH] knfsd: move tempsock aging to a timer
Following are 11 patches from Greg Banks which combine to make knfsd more
Numa-aware.  They reduce hitting on 'global' data structures, and create some
data-structures that can be node-local.

knfsd threads are bound to a particular node, and the thread to handle a new
request is chosen from the threads that are attach to the node that received
the interrupt.

The distribution of threads across nodes can be controlled by a new file in
the 'nfsd' filesystem, though the default approach of an even spread is
probably fine for most sites.

Some (old) numbers that show the efficacy of these patches: N == number of
NICs == number of CPUs == nmber of clients.  Number of NUMA nodes == N/2

N	Throughput, MiB/s	CPU usage, % (max=N*100)
	Before	After		Before	After
	---	------	----		-----	-----
	4	312	435		350	228
	6	500	656		501	418
	8	562	804		690	589

This patch:

Move the aging of RPC/TCP connection sockets from the main svc_recv() loop to
a timer which uses a mark-and-sweep algorithm every 6 minutes.  This reduces
the amount of work that needs to be done in the main RPC loop and the length
of time we need to hold the (effectively global) svc_serv->sv_lock.

[akpm@osdl.org: cleanup]
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:19 -07:00
NeilBrown 6fb2b47fa1 [PATCH] knfsd: Drop 'serv' option to svc_recv and svc_process
It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.

[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown b41b66d63c [PATCH] knfsd: allow sockets to be passed to nfsd via 'portlist'
Userspace should create and bind a socket (but not connectted) and write the
'fd' to portlist.  This will cause the nfs server to listen on that socket.

To close a socket, the name of the socket - as read from 'portlist' can be
written to 'portlist' with a preceding '-'.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown 80212d59e3 [PATCH] knfsd: define new nfsdfs file: portlist - contains list of ports
This file will list all ports that nfsd has open.
Default when TCP enabled will be
   ipv4 udp 0.0.0.0 2049
   ipv4 tcp 0.0.0.0 2049

Later, the list of ports will be settable.

'portlist' chosen rather than 'ports', to avoid unnecessary confusion with
non-mainline patches which created 'ports' with different semantics.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown bc591ccff2 [PATCH] knfsd: add a callback for when last rpc thread finishes
nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more.  So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:17 -07:00
Greg Banks 40f1052217 [PATCH] knfsd: remove an unused variable from auth_unix_lookup()
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:17 -07:00
Dave Hansen d8c76e6f45 [PATCH] r/o bind mount prepwork: inc_nlink() helper
This is mostly included for parity with dec_nlink(), where we will have some
more hooks.  This one should stay pretty darn straightforward for now.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:30 -07:00
Eric Sesterhenn 1811474620 [SUNRPC]: Remove unnecessary check in net/sunrpc/svcsock.c
coverity spotted this one as possible dereference in the dprintk(),
but since there is only one caller of svc_create_socket(), which always
passes a valid sin, we dont need this check.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:03:06 -07:00
Al Viro 753ed90d92 [SUNRPC]: more sunrpc endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:01:22 -07:00
Alexey Dobriyan d8ed029d60 [SUNRPC]: trivial endianness annotations
pure s/u32/__be32/

[AV: large part based on Alexey's patches]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:01:21 -07:00
Alexey Dobriyan 7699431301 [SUNRPC]: svc_{get,put}nl()
* add svc_getnl():
	Take network-endian value from buffer, convert to host-endian
	and return it.
* add svc_putnl():
	Take host-endian value, convert to network-endian and put it
	into a buffer.
* annotate svc_getu32()/svc_putu32() as dealing with network-endian.
* convert to svc_getnl(), svc_putnl().

[AV: in large part it's a carved-up Alexey's patch]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:01:20 -07:00
Theodore Ts'o ba52de123d [PATCH] inode-diet: Eliminate i_blksize from the inode structure
This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:18 -07:00
Alexey Dobriyan 1a1d92c10d [PATCH] Really ignore kmem_cache_destroy return value
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:

	(void)kmem_cache_destroy(cache);

* Those who check it printk something, however, slab_error already printed
  the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
  low-level filesystem driver should make. Converted to ignore.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:10 -07:00
Linus Torvalds 9f261e0113 Merge git://git.linux-nfs.org/pub/linux/nfs-2.6
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (74 commits)
  NFS: unmark NFS direct I/O as experimental
  NFS: add comments clarifying the use of nfs_post_op_update()
  NFSv4: rpc_mkpipe creating socket inodes w/out sk buffers
  NFS: Use SEEK_END instead of hardcoded value
  NFSv4: When mounting with a port=0 argument, substitute port=2049
  NFSv4: Poll more aggressively when handling NFS4ERR_DELAY
  NFSv4: Handle the condition NFS4ERR_FILE_OPEN
  NFSv4: Retry lease recovery if it failed during a synchronous operation.
  NFS: Don't invalidate the symlink we just stuffed into the cache
  NFS: Make read() return an ESTALE if the file has been deleted
  NFSv4: It's perfectly legal for clp to be NULL here....
  NFS: nfs_lookup - don't hash dentry when optimising away the lookup
  SUNRPC: Fix Oops in pmap_getport_done
  SUNRPC: Add refcounting to the struct rpc_xprt
  SUNRPC: Clean up soft task error handling
  SUNRPC: Handle ENETUNREACH, EHOSTUNREACH and EHOSTDOWN socket errors
  SUNRPC: rpc_delay() should not clobber the rpc_task->tk_status
  Fix a referral error Oops
  NFS: NFS_ROOT should use the new rpc_create API
  NFS: Fix up compiler warnings on 64-bit platforms in client.c
  ...

Manually resolved conflict in net/sunrpc/xprtsock.c
2006-09-23 16:58:40 -07:00
Steve Dickson a53a3c58fd NFSv4: rpc_mkpipe creating socket inodes w/out sk buffers
This patch stop rpc_mkpipe from create S_IFSOCK nodes what don't
have associated sk buffers attached (which causes SELinux to oops
during NFSv4 mounts). Instead the S_IFIFO mode bit is set which
probably make more sense and seems to work just fine during
my connectathon and fsx testing...

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:25:05 -04:00
Trond Myklebust 762d4527c2 SUNRPC: Fix Oops in pmap_getport_done
There is no guarantee that the parent task still exists when we exit from
the portmapper. Save the xprt instead.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:25:01 -04:00
Trond Myklebust 6b6ca86b77 SUNRPC: Add refcounting to the struct rpc_xprt
In a subsequent patch, this will allow the portmapper to take a reference
to the rpc_xprt for which it is updating the port number, fixing an Oops.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:25:01 -04:00
Trond Myklebust da45828e28 SUNRPC: Clean up soft task error handling
- Ensure that the task aborts the RPC call only when it has actually timed out.
 - Ensure that req->rq_majortimeo is initialised correctly.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:25:00 -04:00
Trond Myklebust 76303992b4 SUNRPC: Handle ENETUNREACH, EHOSTUNREACH and EHOSTDOWN socket errors
In case of any of the above errors occuring, delay for 3 seconds, then
handle as if it were a timeout error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:56 -04:00
Trond Myklebust 8014793b1b SUNRPC: rpc_delay() should not clobber the rpc_task->tk_status
Doing so prevents stuff like call_encode() from working correctly.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:56 -04:00
Trond Myklebust 158998b6fe SUNRPC: Make rpc_mkpipe() take the parent dentry as an argument
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:54 -04:00
Chuck Lever b86acd501a SUNRPC: export new RPC client functions with _GPL
This patch is optional.

It has been suggested that the RPC client internal functions used by upper
layer protocols (such as NFS) be exported via EXPORT_SYMBOL_GPL.  This
patch does that.

Test plan:
Compile kernel with CONFIG_NFS enabled as a module.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:51 -04:00
Chuck Lever ff9aa5e56d SUNRPC: Eliminate xprt_create_proto and rpc_create_client
The two function call API for creating a new RPC client is now obsolete.
Remove it.

Also, remove an unnecessary check to see whether the caller is capable of
using privileged network services.  The kernel RPC client always uses a
privileged ephemeral port by default; callers are responsible for checking
the authority of users to make use of any RPC service, or for specifying
that a nonprivileged port is acceptable.

Test plan:
Repeated runs of Connectathon locking suite.  Check network trace to ensure
correctness of NLM requests and replies.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:51 -04:00
Chuck Lever 9e1968c58d SUNRPC: Convert RPC portmapper to use new rpc_create() API
Replace xprt_create_proto/rpc_create_client calls in pmap_clnt.c with new
rpc_create() API.

Test plan:
Repeated runs of Connectathon locking suite.  Check network trace for
proper PMAP calls and replies.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:51 -04:00
Chuck Lever c2866763b4 SUNRPC: use sockaddr + size when creating remote transport endpoints
Prepare for more generic transport endpoint handling needed by transports
that might use different forms of addressing, such as IPv6.

Introduce a single function call to replace the two-call
xprt_create_proto/rpc_create_client API.  Define a new rpc_create_args
structure that allows callers to pass in remote endpoint addresses of
varying length.

Test-plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:49 -04:00
Chuck Lever c4efcb1d3e SUNRPC: Use "sockaddr_storage" for storing RPC client's remote peer address
IPv6 addresses are big (128 bytes).  Now that no RPC client consumers treat
the addr field in rpc_xprt structs as an opaque, and access it only via the
API calls, we can safely widen the field in the rpc_xprt struct to
accomodate larger addresses.

Test plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:48 -04:00
Chuck Lever e7f7865743 SUNRPC: Teach rpc_pipe.c to use new rpc_peeraddr() API
Hide the details of how the RPC client stores remote peer addresses from
the RPC pipefs implementation.

Test plan:
Connectathon with Kerberos 5 authentication.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:48 -04:00
Chuck Lever f425eba437 SUNRPC: Create API for displaying remote peer address
Provide an API for formatting the remote peer address for printing without
exposing its internal structure.  The address could be dynamic, so we
support a function call to get the address rather than reading it straight
out of a structure.

Test-plan:
Destructive testing (unplugging the network temporarily).  Probably need
to rig a server where certain services aren't running, or that returns an
error for some typical operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:48 -04:00
Chuck Lever edb267a688 SUNRPC: add xprt switch API for printing formatted remote peer addresses
Add a new method to the transport switch API to provide a way to convert
the opaque contents of xprt->addr to a human-readable string.

Test plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:47 -04:00