Commit Graph

164 Commits

Author SHA1 Message Date
Linus Torvalds 2df4ee78d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.

 2) Several spots need to get to the original listner for SYN-ACK
    packets, most spots got this ok but some were not.  Whilst covering
    the remaining cases, create a helper to do this.  From Eric Dumazet.

 3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
    from Rasmus Villemoes.

 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.

 5) Use after free in mvneta driver, from Justin Maggard.

 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.

 7) Add missing ZLIB_INFLATE dependency for new qed driver.  From Arnd
    Bergmann.

 8) Fix multicast getsockopt deadlock, from WANG Cong.

 9) Fix deadlock in btusb, from Kuba Pawlak.

10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
    counter state.  From Sabrina Dubroca.

11) Fix packet_bind() race, which can cause lost notifications, from
    Francesco Ruggeri.

12) Fix MAC restoration in qlcnic driver during bonding mode changes,
    from Jarod Wilson.

13) Revert bridging forward delay change which broke libvirt and other
    userspace things, from Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  Revert "bridge: Allow forward delay to be cfgd when STP enabled"
  bpf_trace: Make dependent on PERF_EVENTS
  qed: select ZLIB_INFLATE
  net: fix a race in dst_release()
  net: mvneta: Fix memory use after free.
  net: Documentation: Fix default value tcp_limit_output_bytes
  macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
  mvneta: add FIXED_PHY dependency
  net: caif: check return value of alloc_netdev
  net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
  drivers: net: xgene: fix RGMII 10/100Mb mode
  netfilter: nft_meta: use skb_to_full_sk() helper
  net_sched: em_meta: use skb_to_full_sk() helper
  sched: cls_flow: use skb_to_full_sk() helper
  netfilter: xt_owner: use skb_to_full_sk() helper
  smack: use skb_to_full_sk() helper
  net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
  bpf: doc: correct arch list for supported eBPF JIT
  dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
  bonding: fix panic on non-ARPHRD_ETHER enslave failure
  ...
2015-11-10 18:11:41 -08:00
Steven Rostedt a31d82d85a bpf_trace: Make dependent on PERF_EVENTS
Arnd Bergmann reported:

  In my ARM randconfig tests, I'm getting a build error for
  newly added code in bpf_perf_event_read and bpf_perf_event_output
  whenever CONFIG_PERF_EVENTS is disabled:

  kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read':
  kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu'
  if (event->oncpu != smp_processor_id() ||
           ^
  kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu'
        event->pmu->count)

  This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT
  is disabled. I'm not sure if that is a configuration we care
  about, otherwise we could prevent this case from occuring by
  adding Kconfig dependencies.

Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS.
By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine.

Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-10 15:40:14 -05:00
Tal Shorer ddd70280bf tracing: gpio: Add Kconfig option for enabling/disabling trace events
Add a new options to trace Kconfig, CONFIG_TRACING_EVENTS_GPIO, that is
used for enabling/disabling compilation of gpio function trace events.

Link: http://lkml.kernel.org/r/1438432079-11704-4-git-send-email-tal.shorer@gmail.com

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 21:56:10 -04:00
Wang Nan 04a22fae4c tracing, perf: Implement BPF programs attached to uprobes
By copying BPF related operation to uprobe processing path, this patch
allow users attach BPF programs to uprobes like what they are already
doing on kprobes.

After this patch, users are allowed to use PERF_EVENT_IOC_SET_BPF on a
uprobe perf event. Which make it possible to profile user space programs
and kernel events together using BPF.

Because of this patch, CONFIG_BPF_EVENTS should be selected by
CONFIG_UPROBE_EVENT to ensure trace_call_bpf() is compiled even if
KPROBE_EVENT is not set.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-06 15:29:14 -03:00
Linus Torvalds 6c8a53c9e6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Core kernel changes:

   - One of the more interesting features in this cycle is the ability
     to attach eBPF programs (user-defined, sandboxed bytecode executed
     by the kernel) to kprobes.

     This allows user-defined instrumentation on a live kernel image
     that can never crash, hang or interfere with the kernel negatively.
     (Right now it's limited to root-only, but in the future we might
     allow unprivileged use as well.)

     (Alexei Starovoitov)

   - Another non-trivial feature is per event clockid support: this
     allows, amongst other things, the selection of different clock
     sources for event timestamps traced via perf.

     This feature is sought by people who'd like to merge perf generated
     events with external events that were measured with different
     clocks:

       - cluster wide profiling

       - for system wide tracing with user-space events,

       - JIT profiling events

     etc.  Matching perf tooling support is added as well, available via
     the -k, --clockid <clockid> parameter to perf record et al.

     (Peter Zijlstra)

  Hardware enablement kernel changes:

   - x86 Intel Processor Trace (PT) support: which is a hardware tracer
     on steroids, available on Broadwell CPUs.

     The hardware trace stream is directly output into the user-space
     ring-buffer, using the 'AUX' data format extension that was added
     to the perf core to support hardware constraints such as the
     necessity to have the tracing buffer physically contiguous.

     This patch-set was developed for two years and this is the result.
     A simple way to make use of this is to use BTS tracing, the PT
     driver emulates BTS output - available via the 'intel_bts' PMU.
     More explicit PT specific tooling support is in the works as well -
     will probably be ready by 4.2.

     (Alexander Shishkin, Peter Zijlstra)

   - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware
     feature of Intel Xeon CPUs that allows the measurement and
     allocation/partitioning of caches to individual workloads.

     These kernel changes expose the measurement side as a new PMU
     driver, which exposes various QoS related PMU events.  (The
     partitioning change is work in progress and is planned to be merged
     as a cgroup extension.)

     (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P
     Waskiewicz Jr)

   - x86 Intel Haswell LBR call stack support: this is a new Haswell
     feature that allows the hardware recording of call chains, plus
     tooling support.  To activate this feature you have to enable it
     via the new 'lbr' call-graph recording option:

        perf record --call-graph lbr
        perf report

     or:

        perf top --call-graph lbr

     This hardware feature is a lot faster than stack walk or dwarf
     based unwinding, but has some limitations:

       - It reuses the current LBR facility, so LBR call stack and
         branch record can not be enabled at the same time.

       - It is only available for user-space callchains.

     (Yan, Zheng)

   - x86 Intel Broadwell CPU support and various event constraints and
     event table fixes for earlier models.

     (Andi Kleen)

   - x86 Intel HT CPUs event scheduling workarounds.  This is a complex
     CPU bug affecting the SNB,IVB,HSW families that results in counter
     value corruption.  The mitigation code is automatically enabled and
     is transparent.

     (Maria Dimakopoulou, Stephane Eranian)

  The perf tooling side had a ton of changes in this cycle as well, so
  I'm only able to list the user visible changes here, in addition to
  the tooling changes outlined above:

  User visible changes affecting all tools:

      - Improve support of compressed kernel modules (Jiri Olsa)
      - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo)
      - Bash completion for subcommands (Yunlong Song)
      - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa)
      - Support missing -f to override perf.data file ownership. (Yunlong Song)
      - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo)

  User visible changes in individual tools:

    'perf data':

        New tool for converting perf.data to other formats, initially
        for the CTF (Common Trace Format) from LTTng (Jiri Olsa,
        Sebastian Siewior)

    'perf diff':

        Add --kallsyms option (David Ahern)

    'perf list':

        Allow listing events with 'tracepoint' prefix (Yunlong Song)

        Sort the output of the command (Yunlong Song)

    'perf kmem':

        Respect -i option (Jiri Olsa)

        Print big numbers using thousands' group (Namhyung Kim)

        Allow -v option (Namhyung Kim)

        Fix alignment of slab result table (Namhyung Kim)

    'perf probe':

        Support multiple probes on different binaries on the same command line (Masami Hiramatsu)

        Support unnamed union/structure members data collection. (Masami Hiramatsu)

        Check kprobes blacklist when adding new events. (Masami Hiramatsu)

    'perf record':

        Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra)

        Support recording running/enabled time (Andi Kleen)

    'perf sched':

        Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song)

    'perf report' and 'perf top':

        Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo)

        Indicate which callchain entries are annotated in the
        TUI hists browser (Arnaldo Carvalho de Melo)

        Add pid/tid filtering to 'report' and 'script' commands (David Ahern)

        Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one
        cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT
        events (Arnaldo Carvalho de Melo)

    'perf stat':

        Report unsupported events properly (Suzuki K. Poulose)

        Output running time and run/enabled ratio in CSV mode (Andi Kleen)

    'perf trace':

        Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo)

        Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo)

        Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo)

        Dump stack on segfaults (Arnaldo Carvalho de Melo)

        No need to explicitely enable evsels for workload started from perf, let it
        be enabled via perf_event_attr.enable_on_exec, removing some events that take
        place in the 'perf trace' before a workload is really started by it.
        (Arnaldo Carvalho de Melo)

        Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo)

  There's also been a ton of infrastructure work done, such as the
  split-out of perf's build system into tools/build/ and other changes -
  see the shortlog and changelog for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits)
  perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init()
  perf evlist: Fix type for references to data_head/tail
  perf probe: Check the orphaned -x option
  perf probe: Support multiple probes on different binaries
  perf buildid-list: Fix segfault when show DSOs with hits
  perf tools: Fix cross-endian analysis
  perf tools: Fix error path to do closedir() when synthesizing threads
  perf tools: Fix synthesizing fork_event.ppid for non-main thread
  perf tools: Add 'I' event modifier for exclude_idle bit
  perf report: Don't call map__kmap if map is NULL.
  perf tests: Fix attr tests
  perf probe: Fix ARM 32 building error
  perf tools: Merge all perf_event_attr print functions
  perf record: Add clockid parameter
  perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10
  perf sched replay: Support using -f to override perf.data file ownership
  perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
  perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
  perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
  perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations
  ...
2015-04-14 14:37:47 -07:00
Steven Rostedt (Red Hat) 9828413d47 tracing: Add enum_map file to show enums that have been mapped
Add a enum_map file in the tracing directory to see what enums have been
saved to convert in the print fmt files.

As this requires the enum mapping to be persistent in memory, it is only
created if the new config option CONFIG_TRACE_ENUM_MAP_FILE is enabled.
This is for debugging and will increase the persistent memory footprint
of the kernel.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 10:58:35 -04:00
Ingo Molnar e1abf2cc8d bpf: Fix the build on BPF_SYSCALL=y && !CONFIG_TRACING kernels, make it more configurable
So bpf_tracing.o depends on CONFIG_BPF_SYSCALL - but that's not its only
dependency, it also depends on the tracing infrastructure and on kprobes,
without which it will fail to build with:

  In file included from kernel/trace/bpf_trace.c:14:0:
  kernel/trace/trace.h: In function ‘trace_test_and_set_recursion’:
  kernel/trace/trace.h:491:28: error: ‘struct task_struct’ has no member named ‘trace_recursion’
    unsigned int val = current->trace_recursion;
  [...]

It took quite some time to trigger this build failure, because right now
BPF_SYSCALL is very obscure, depends on CONFIG_EXPERT. So also make BPF_SYSCALL
more configurable, not just under CONFIG_EXPERT.

If BPF_SYSCALL, tracing and kprobes are enabled then enable the bpf_tracing
gateway as well.

We might want to make this an interactive option later on, although
I'd not complicate it unnecessarily: enabling BPF_SYSCALL is enough of
an indicator that the user wants BPF support.

Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 16:28:06 +02:00
Steven Rostedt (Red Hat) 3a636388ba tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
All users of function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST have
been removed. We can safely remove them from the kernel.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 13:58:12 -04:00
Steven Rostedt (Red Hat) 81dc9f0ef2 tracing: Add tracepoint benchmark tracepoint
In order to help benchmark the time tracepoints take, a new config
option is added called CONFIG_TRACEPOINT_BENCHMARK. When this option
is set a tracepoint is created called "benchmark:benchmark_event".
When the tracepoint is enabled, it kicks off a kernel thread that
goes into an infinite loop (calling cond_sched() to let other tasks
run), and calls the tracepoint. Each iteration will record the time
it took to write to the tracepoint and the next iteration that
data will be passed to the tracepoint itself. That is, the tracepoint
will report the time it took to do the previous tracepoint.
The string written to the tracepoint is a static string of 128 bytes
to keep the time the same. The initial string is simply a write of
"START". The second string records the cold cache time of the first
write which is not added to the rest of the calculations.

As it is a tight loop, it benchmarks as hot cache. That's fine because
we care most about hot paths that are probably in cache already.

An example of the output:

     START
     first=3672 [COLD CACHED]
     last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
     last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
     last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
     last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
     last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
     last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-29 22:49:54 -04:00
David A. Long 09294e31b1 uprobes: Kconfig dependency fix
Suggested change from Oleg Nesterov. Fixes incomplete dependencies
for uprobes feature.

Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
2014-03-18 16:39:33 -04:00
Steven Rostedt (Red Hat) 2228768885 ring-buffer: Select IRQ_WORK
As the wake up logic for waiters on the buffer has been moved
from the tracing code to the ring buffer, it requires also adding
IRQ_WORK as the wake up code is performed via irq_work.

This fixes compile breakage when a user of the ring buffer is selected
but tracing and irq_work are not.

Link http://lkml.kernel.org/r/20130503115332.GT8356@rric.localhost

Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Robert Richter <rric@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-03 19:24:17 -04:00
Linus Torvalds 9e8529afc4 Tracing updates for Linux 3.10
Along with the usual minor fixes and clean ups there are a few major
 changes with this pull request.
 
 1) Multiple buffers for the ftrace facility
 
 This feature has been requested by many people over the last few years.
 I even heard that Google was about to implement it themselves. I finally
 had time and cleaned up the code such that you can now create multiple
 instances of the ftrace buffer and have different events go to different
 buffers. This way, a low frequency event will not be lost in the noise
 of a high frequency event.
 
 Note, currently only events can go to different buffers, the tracers
 (ie. function, function_graph and the latency tracers) still can only
 be written to the main buffer.
 
 2) The function tracer triggers have now been extended.
 
 The function tracer had two triggers. One to enable tracing when a
 function is hit, and one to disable tracing. Now you can record a
 stack trace on a single (or many) function(s), take a snapshot of the
 buffer (copy it to the snapshot buffer), and you can enable or disable
 an event to be traced when a function is hit.
 
 3) A perf clock has been added.
 
 A "perf" clock can be chosen to be used when tracing. This will cause
 ftrace to use the same clock as perf uses, and hopefully this will make
 it easier to interleave the perf and ftrace data for analysis.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
 QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
 10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
 sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
 8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
 HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
 =W1n+
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Along with the usual minor fixes and clean ups there are a few major
  changes with this pull request.

   1) Multiple buffers for the ftrace facility

  This feature has been requested by many people over the last few
  years.  I even heard that Google was about to implement it themselves.
  I finally had time and cleaned up the code such that you can now
  create multiple instances of the ftrace buffer and have different
  events go to different buffers.  This way, a low frequency event will
  not be lost in the noise of a high frequency event.

  Note, currently only events can go to different buffers, the tracers
  (ie function, function_graph and the latency tracers) still can only
  be written to the main buffer.

   2) The function tracer triggers have now been extended.

  The function tracer had two triggers.  One to enable tracing when a
  function is hit, and one to disable tracing.  Now you can record a
  stack trace on a single (or many) function(s), take a snapshot of the
  buffer (copy it to the snapshot buffer), and you can enable or disable
  an event to be traced when a function is hit.

   3) A perf clock has been added.

  A "perf" clock can be chosen to be used when tracing.  This will cause
  ftrace to use the same clock as perf uses, and hopefully this will
  make it easier to interleave the perf and ftrace data for analysis."

* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
  tracepoints: Prevent null probe from being added
  tracing: Compare to 1 instead of zero for is_signed_type()
  tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
  ftrace: Get rid of ftrace_profile_bits
  tracing: Check return value of tracing_init_dentry()
  tracing: Get rid of unneeded key calculation in ftrace_hash_move()
  tracing: Reset ftrace_graph_filter_enabled if count is zero
  tracing: Fix off-by-one on allocating stat->pages
  kernel: tracing: Use strlcpy instead of strncpy
  tracing: Update debugfs README file
  tracing: Fix ftrace_dump()
  tracing: Rename trace_event_mutex to trace_event_sem
  tracing: Fix comment about prefix in arch_syscall_match_sym_name()
  tracing: Convert trace_destroy_fields() to static
  tracing: Move find_event_field() into trace_events.c
  tracing: Use TRACE_MAX_PRINT instead of constant
  tracing: Use pr_warn_once instead of open coded implementation
  ring-buffer: Add ring buffer startup selftest
  tracing: Bring Documentation/trace/ftrace.txt up to date
  tracing: Add "perf" trace_clock
  ...

Conflicts:
	kernel/trace/ftrace.c
	kernel/trace/trace.c
2013-04-29 13:55:38 -07:00
Steven Rostedt (Red Hat) 6c43e554a2 ring-buffer: Add ring buffer startup selftest
When testing my large changes to the ftrace system, there was
a bug that looked like the ring buffer was dropping events.
I wrote up a quick integrity checker of the ring buffer to
see if it was.

Although the bug ended up being something stupid I did in ftrace,
and had nothing to do with the ring buffer, I figured if I spent
the time to write up this test, I might as well include it in the
kernel.

I cleaned it up a bit, as the original version was rather ugly.
Not saying this version is pretty, but it's a beauty queen
compared to what I original wrote.

To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST.

Note, it runs for 10 seconds, so it will slow your boot time
by at least 10 more seconds.

What it does is documented in both the comments and the Kconfig
help.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 13:21:16 -04:00
Steven Rostedt (Red Hat) 0b85ffc293 tracing: Add config option to allow snapshot to swap per cpu
When the preempt or irq latency tracers are enabled, they require
the ring buffer to be able to swap the per cpu sub buffers between
two main buffers. This adds a slight overhead to tracing as the
trace recording needs to perform some checks to synchronize
between recording and swaps that might be happening on other CPUs.

The config RING_BUFFER_ALLOW_SWAP is set when a user of the ring
buffer needs the "swap cpu" feature, otherwise the extra checks
are not implemented and removed from the tracing overhead.

The snapshot feature will swap per CPU if the RING_BUFFER_ALLOW_SWAP
config is set. But that only gets set by things like OPROFILE
and the irqs and preempt latency tracers.

This config is added to let the user decide to include this feature
with the snapshot agnostic from whether or not another user of
the ring buffer sets this config.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:47 -04:00
Steven Rostedt (Red Hat) 22cffc2bb4 tracing: Enable snapshot when any latency tracer is enabled
The snapshot utility is extremely useful, and does not add any more
overhead in memory when another latency tracer is enabled. They use
the snapshot underneath. There's no reason to hide the snapshot file
when a latency tracer has been enabled in the kernel.

If any of the latency tracers (irq, preempt or wakeup) is enabled
then also select the snapshot facility.

Note, snapshot can be enabled without the latency tracers enabled.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:57 -04:00
Linus Torvalds 7c6baa304b Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc minor fixes mostly related to tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  s390: Fix a header dependencies related build error
  tracing: update documentation of snapshot utility
  tracing: Do not return EINVAL in snapshot when not allocated
  tracing: Add help of snapshot feature when snapshot is empty
  ftrace: Update the kconfig for DYNAMIC_FTRACE
2013-03-11 07:54:29 -07:00
Steven Rostedt db05021d49 ftrace: Update the kconfig for DYNAMIC_FTRACE
The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Cc: stable@vger.kernel.org
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-27 21:58:01 -05:00
Linus Torvalds 8793422fd9 ACPI and power management updates for 3.9-rc1
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.
 
 - ACPI power resources handling and ACPI device PM update from
   Rafael J. Wysocki.
 
 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng
   with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
   Tim Gardner.
 
 - Support for Intel Lynxpoint LPSS from Mika Westerberg.
 
 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
   with contributions from Stratos Karafotis and Rickard Andersson.
 
 - Intel P-states driver for Sandy Bridge processors from
   Dirk Brandewie.
 
 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
 
 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.
 
 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.
 
 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.
 
 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.
 
 - Support for "lightweight suspend" from Zhang Rui.
 
 - Removal of the deprecated power trace API from Paul Gortmaker.
 
 - Assorted updates from Andreas Fleig, Colin Ian King,
   Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
   Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
   Thomas Renninger, and Yasuaki Ishimatsu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIsArAAoJEKhOf7ml8uNsD6MP/j7C4NA+GTq6RdwoJt+Yki0K
 9Ep8I4pEuRFoN/oskv24EyQhpGJIk6UxWcJ/DWFBc+1VhmKORta7k2Idv/wlJA77
 s7AcDveA9xcDh+TVfbh87TeuiMSXiSdDZbiaQO+wMizWJAF3F84AnjiAqqqyQcSK
 bA5/Siz/vWlt9PyYDaQtHTVE4lpvPuVcQdYewsdaH2PsmUjvIg/TUzg28CTrdyvv
 eHOdBK9R0/OLQLhzRbL0VOGJ//wEl+HJRO0QEhTKPgdQ1e/VH/4Zu5WSzF8P/x4C
 s2f8U4IKQqulDuDHXtpMpelFm7hRWgsOqZLkcyXLs+0dvSM9CTPO6P0ZaImxUctk
 5daHWEsXUnCErDQawt1mcZP8l6qnxofMQIfLXyPVzvlSnHyToTmrtXa1v2u4AuL/
 hOo4MYWsFNUmRdtGFFGlExGgEDZ4G5NwiYjRBl/6XJ3v4nhnnMbuzxP8scpoe5m1
 8tjroJHZFUUs/mFU/H+oRbHzSzXPmp1sddNaTg4OpVmTn3DDh6ljnFhiItd1Ndw0
 5ldVbSe6ETq5RoK0TbzvQOeVpa9F3JfqbrXLQPqfd2iz/No41LQYG1uShRYuXKuA
 wfEcc+c9VMd3FILu05pGwBnU8VS9VbxTYMz7xDxg6b29Ywnb7u+Q1ycCk2gFYtkS
 E2oZDuyewTJxaskzYsNr
 =wijn
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...
2013-02-20 11:26:56 -08:00
Hiraku Toyooka debdd57f51 tracing: Make a snapshot feature available from userspace
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.

Add "snapshot" debugfs file in "tracing" directory.

  snapshot:
    This is used to take a snapshot and to read the output of the
    snapshot.

     # echo 1 > snapshot

    This will allocate the spare buffer for snapshot (if it is
    not allocated), and take a snapshot.

     # cat snapshot

    This will show contents of the snapshot.

     # echo 0 > snapshot

    This will free the snapshot if it is allocated.

    Any other positive values will clear the snapshot contents if
    the snapshot is allocated, or return EINVAL if it is not allocated.

Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
   Fixed irqsoff selftest and also a conflict with a change
   that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 11:02:06 -05:00
Paul Gortmaker 43720bd601 PM / tracing: remove deprecated power trace API
The text in Documentation said it would be removed in 2.6.41;
the text in the Kconfig said removal in the 3.1 release.  Either
way you look at it, we are well past both, so push it off a cliff.

Note that the POWER_CSTATE and the POWER_PSTATE are part of the
legacy tracing API.  Remove all tracepoints which use these flags.
As can be seen from context, most already have a trace entry via
trace_cpu_idle anyways.

Also, the cpufreq/cpufreq.c PSTATE one is actually unpaired, as
compared to the CSTATE ones which all have a clear start/stop.
As part of this, the trace_power_frequency also becomes orphaned,
so it too is deleted.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-26 00:39:12 +01:00
Masami Hiramatsu 06aeaaeabf ftrace: Move ARCH_SUPPORTS_FTRACE_SAVE_REGS in Kconfig
Move SAVE_REGS support flag into Kconfig and rename
it to CONFIG_DYNAMIC_FTRACE_WITH_REGS. This also introduces
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which indicates
the architecture depending part of ftrace has a code
that saves full registers.
On the other hand, CONFIG_DYNAMIC_FTRACE_WITH_REGS indicates
the code is enabled.

Link: http://lkml.kernel.org/r/20120928081516.3560.72534.stgit@ltc138.sdl.hitachi.co.jp

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-21 13:22:35 -05:00
Steven Rostedt 0d5c6e1c19 tracing: Use irq_work for wake ups and remove *_nowake_*() functions
Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).

With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-02 10:21:52 -04:00
Josh Triplett ea632e9f12 trace: Stop compiling in trace_clock unconditionally
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.

Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.

Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13 22:52:08 -04:00
Steven Rostedt a2546fae01 ftrace: Add -mfentry to Makefile on function tracer
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.

The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.

If the architecture and the compiler both support -mfentry then
use that instead.

Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org

Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-23 11:25:02 -04:00
Linus Torvalds 654443e20d Merge branch 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull user-space probe instrumentation from Ingo Molnar:
 "The uprobes code originates from SystemTap and has been used for years
  in Fedora and RHEL kernels.  This version is much rewritten, reviews
  from PeterZ, Oleg and myself shaped the end result.

  This tree includes uprobes support in 'perf probe' - but SystemTap
  (and other tools) can take advantage of user probe points as well.

  Sample usage of uprobes via perf, for example to profile malloc()
  calls without modifying user-space binaries.

  First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.

  If you don't know which function you want to probe you can pick one
  from 'perf top' or can get a list all functions that can be probed
  within libc (binaries can be specified as well):

	$ perf probe -F -x /lib/libc.so.6

  To probe libc's malloc():

	$ perf probe -x /lib64/libc.so.6 malloc
	Added new event:
	probe_libc:malloc    (on 0x7eac0)

  You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

  Make use of it to create a call graph (as the flat profile is going to
  look very boring):

	$ perf record -e probe_libc:malloc -gR make
	[ perf record: Woken up 173 times to write data ]
	[ perf record: Captured and wrote 44.190 MB perf.data (~1930712

	$ perf report | less

	  32.03%            git  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc
	                       |
	                       |--0.95%-- 0x208eb1000000000
	                       |
	                       |--0.63%-- htab_traverse_noresize

	  11.04%             as  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   7.15%             ld  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   5.07%             sh  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |
	   4.99%  python-config  libc-2.15.so   [.] malloc
	          |
	          --- malloc
	             |
	   4.54%           make  libc-2.15.so   [.] malloc
	                   |
	                   --- malloc
	                      |
	                      |--7.34%-- glob
	                      |          |
	                      |          |--93.18%-- 0x41588f
	                      |          |
	                      |           --6.82%-- glob
	                      |                     0x41588f

	   ...

  Or:

	$ perf report -g flat | less

	# Overhead        Command  Shared Object      Symbol
	# ........  .............  .............  ..........
	#
	  32.03%            git  libc-2.15.so   [.] malloc
	          27.19%
	              malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	          24.77%
	              malloc

	  11.04%             as  libc-2.15.so   [.] malloc
	          11.02%
	              malloc

	   7.15%             ld  libc-2.15.so   [.] malloc
	           6.57%
	              malloc

	 ...

  The core uprobes design is fairly straightforward: uprobes probe
  points register themselves at (inode:offset) addresses of
  libraries/binaries, after which all existing (or new) vmas that map
  that address will have a software breakpoint injected at that address.
  vmas are COW-ed to preserve original content.  The probe points are
  kept in an rbtree.

  If user-space executes the probed inode:offset instruction address
  then an event is generated which can be recovered from the regular
  perf event channels and mmap-ed ring-buffer.

  Multiple probes at the same address are supported, they create a
  dynamic callback list of event consumers.

  The basic model is further complicated by the XOL speedup: the
  original instruction that is probed is copied (in an architecture
  specific fashion) and executed out of line when the probe triggers.
  The XOL area is a single vma per process, with a fixed number of
  entries (which limits probe execution parallelism).

  The API: uprobes are installed/removed via
  /sys/kernel/debug/tracing/uprobe_events, the API is integrated to
  align with the kprobes interface as much as possible, but is separate
  to it.

  Injecting a probe point is privileged operation, which can be relaxed
  by setting perf_paranoid to -1.

  You can use multiple probes as well and mix them with kprobes and
  regular PMU events or tracepoints, when instrumenting a task."

Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().

* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf probe: Detect probe target when m/x options are absent
  perf probe: Provide perf interface for uprobes
  tracing: Fix kconfig warning due to a typo
  tracing: Provide trace events interface for uprobes
  tracing: Extract out common code for kprobes/uprobes trace events
  tracing: Modify is_delete, is_return from int to bool
  uprobes/core: Decrement uprobe count before the pages are unmapped
  uprobes/core: Make background page replacement logic account for rss_stat counters
  uprobes/core: Optimize probe hits with the help of a counter
  uprobes/core: Allocate XOL slots for uprobes use
  uprobes/core: Handle breakpoint and singlestep exceptions
  uprobes/core: Rename bkpt to swbp
  uprobes/core: Make order of function parameters consistent across functions
  uprobes/core: Make macro names consistent
  uprobes: Update copyright notices
  uprobes/core: Move insn to arch specific structure
  uprobes/core: Remove uprobe_opcode_sz
  uprobes/core: Make instruction tables volatile
  uprobes: Move to kernel/events/
  uprobes/core: Clean up, refactor and improve the code
  ...
2012-05-24 11:39:34 -07:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Steven Rostedt b732d439cb ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
The function tracer will enable the -pg option with gcc, which requires
that frame pointers. When FRAME_POINTER is defined in the kernel config
it adds the gcc option -fno-omit-frame-pointer which causes some problems
on some architectures. For those architectures, the FRAME_POINTER select
was not set.

When FUNCTION_TRACER was selected on these architectures that can not have
-fno-omit-frame-pointer, the -pg option is still set. But when
FRAME_POINTER is not selected, the kernel config would add the gcc option
-fomit-frame-pointer. Adding this option is incompatible with -pg
even on archs that do not need frame pointers with -pg.

The answer to this was to just not add either -fno-omit-frame-pointer
or -fomit-frame-pointer on these archs that want function tracing
but do not set FRAME_POINTER.

As it turns out, for archs that require frame pointers for function
tracing, the same can be used. If gcc requires frame pointers with
-pg, it will simply add it. The best thing to do is not select FRAME_POINTER
when function tracing is selected, and let gcc add it if needed.

Only add the -fno-omit-frame-pointer when something else selects
FRAME_POINTER, but do not add -fomit-frame-pointer if function tracing
is selected.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16 20:00:29 -04:00
Srikar Dronamraju f3f096cfed tracing: Provide trace events interface for uprobes
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.

The following example shows how to dump the instruction pointer
and %ax a register at the probed text address.  Here we are
trying to probe zfree in /bin/zsh:

 # cd /sys/kernel/debug/tracing/
 # cat /proc/`pgrep  zsh`/maps | grep /bin/zsh | grep r-xp
 00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
 # objdump -T /bin/zsh | grep -w zfree
 0000000000446420 g    DF .text  0000000000000012  Base
 zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
 # cat uprobe_events
 p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
 # echo 1 > events/uprobes/enable
 # sleep 20
 # echo 0 > events/uprobes/enable
 # cat trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
              zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 14:30:17 +02:00
Srikar Dronamraju 8ab83f5647 tracing: Extract out common code for kprobes/uprobes trace events
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 14:29:57 +02:00
Masanari Iida 59bf896406 Fix "the the" in various Kconfig
Fix typo "the the" in various Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-18 14:12:27 +02:00
Gerlando Falauto 8c9cf542b8 tracing: Do not select FRAME_POINTER on PPC
On PowerPC, FUNCTION_TRACER selects FRAME_POINTER, even
though the architecture does not support it.

This causes the following warning:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && FUNCTION_TRACER && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)

So remove the warning by adding the extra condition
"if !PPC" to FUNCTION_TRACER for FRAME_POINTER selection

Link: http://lkml.kernel.org/r/1330330101-8618-1-git-send-email-gerlando.falauto@keymile.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-27 08:45:11 -05:00
Jesper Juhl f629299b54 trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED
What was scheduled to be 2.6.41 is now going to be 3.1 .

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1107250929370.8080@swampdragon.chaosbits.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-25 09:37:21 +02:00
Michal Simek d20ac25282 ftrace: Build without frame pointers on Microblaze
Microblaze doesn't need/support FRAME_POINTERS in order to have a working
function tracer.

The patch remove Kconfig warning.

Warning log:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP &&
FUNCTION_TRACER && KMEMCHECK) selects FRAME_POINTER which has unmet direct
dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 ||
SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)

Signed-off-by: Michal Simek <monstr@monstr.eu>
Link: http://lkml.kernel.org/r/1301908812-8119-2-git-send-email-monstr@monstr.eu
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-21 09:06:24 -04:00
David Rientjes 13e5befadd trace, documentation: Fix branch profiling location in debugfs
The debugfs interface for branch profiling is through

	/sys/kernel/debug/tracing/trace_stat/branch_annotated
	/sys/kernel/debug/tracing/trace_stat/branch_all

so update the Kconfig accordingly.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.1103161716320.11407@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-17 09:10:45 +01:00
Thomas Renninger 25e41933b5 perf: Clean up power events by introducing new, more generic ones
Add these new power trace events:

 power:cpu_idle
 power:cpu_frequency
 power:machine_suspend

The old C-state/idle accounting events:
  power:power_start
  power:power_end

Have now a replacement (but we are still keeping the old
tracepoints for compatibility):

  power:cpu_idle

and
  power:power_frequency

is replaced with:
  power:cpu_frequency

power:machine_suspend is newly introduced.

Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.

the type= field got removed from both, it was never
used and the type is differed by the event type itself.

perf timechart userspace tool gets adjusted in a separate patch.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04 08:16:54 +01:00
Heiko Carstens becf91f187 [S390] ftrace: build without frame pointers on s390
s390 doesn't need FRAME_POINTERS in order to have a working function tracer.
We don't need frame pointers in order to get strack traces since we always
have valid backchains by using the -mkernel-backchain gcc option.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-10 10:05:54 +01:00
Linus Torvalds b5153163ed Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...
2010-10-21 16:42:32 -07:00
Steven Rostedt cf4db2597a ftrace: Rename config option HAVE_C_MCOUNT_RECORD to HAVE_C_RECORDMCOUNT
The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-14 23:32:44 -04:00
Steven Rostedt 72441cb1fd ftrace/x86: Add support for C version of recordmcount
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.

After verifying this works, other archs can add:

 HAVE_C_MCOUNT_RECORD

in its Kconfig and it will use the C version of recordmcount
instead of the perl version.

Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-14 16:52:41 -04:00
Rabin Vincent 09bfafac3e ARM: 6314/1: ftrace: allow build without frame pointers on ARM
With a new enough GCC, ARM function tracing can be supported without the
need for frame pointers.  This is essential for Thumb-2 support, since
frame pointers aren't available then.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:24:53 +01:00
Linus Torvalds 3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Linus Torvalds b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
John Stultz 592913ecb8 time: Kill off CONFIG_GENERIC_TIME
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27 12:40:54 +02:00
Frederic Weisbecker f376bf5ffb tracing: Remove sysprof ftrace plugin
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.

Drop the sysprof ftrace plugin then, as it's mostly useless.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
2010-07-20 14:29:46 +02:00
Frederic Weisbecker 5d550467b9 tracing: Remove ksym tracer
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
2010-07-15 23:59:33 +02:00
Tejun Heo 6416669975 workqueue: temporarily remove workqueue tracing
Strip tracing code from workqueue and remove workqueue tracing.  This
is temporary measure till concurrency managed workqueue is complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-29 10:07:11 +02:00
Li Zefan 039ca4e74a tracing: Remove kmemtrace ftrace plugin
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-09 17:31:22 +02:00
Américo Wang 30dbb20e68 tracing: Remove boot tracer
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-08 23:31:28 +02:00
Peter Zijlstra faa4602e47 x86, perf, bts, mm: Delete the never used BTS-ptrace code
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-26 11:33:55 +01:00
Ingo Molnar 6fb83029db Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core 2010-02-27 10:06:10 +01:00