Commit Graph

30 Commits

Author SHA1 Message Date
Zhang Haoyu 184564efae kvm: ioapic: conditionally delay irq delivery duringeoi broadcast
Currently, we call ioapic_service() immediately when we find the irq is still
active during eoi broadcast. But for real hardware, there's some delay between
the EOI writing and irq delivery.  If we do not emulate this behavior, and
re-inject the interrupt immediately after the guest sends an EOI and re-enables
interrupts, a guest might spend all its time in the ISR if it has a broken
handler for a level-triggered interrupt.

Such livelock actually happens with Windows guests when resuming from
hibernation.

As there's no way to recognize the broken handle from new raised ones, this patch
delays an interrupt if 10.000 consecutive EOIs found that the interrupt was
still high.  The guest can then make a little forward progress, until a proper
IRQ handler is set or until some detection routine in the guest (such as
Linux's note_interrupt()) recognizes the situation.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 14:44:48 +02:00
Stephen Hemminger 7940876e13 kvm: make local functions static
Running 'make namespacecheck' found lots of functions that
should be declared static, since only used in one file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-01-08 19:02:58 -02:00
Yang Zhang cf9e65b773 KVM: Set TMR when programming ioapic entry
We already know the trigger mode of a given interrupt when programming
the ioapice entry. So it's not necessary to set it in each interrupt
delivery.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 16:32:40 -03:00
Yang Zhang 3d81bc7e96 KVM: Call common update function when ioapic entry changed.
Both TMR and EOI exit bitmap need to be updated when ioapic changed
or vcpu's id/ldr/dfr changed. So use common function instead eoi exit
bitmap specific function.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 16:32:40 -03:00
Yang Zhang aa2fbe6d44 KVM: Let ioapic know the irq line status
Userspace may deliver RTC interrupt without query the status. So we
want to track RTC EOI for this case.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang 106069193c KVM: Add reset/restore rtc_status support
restore rtc_status from migration or save/restore

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang b4f2225c07 KVM: Return destination vcpu on interrupt injection
Add a new parameter to know vcpus who received the interrupt.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:34 -03:00
Yang Zhang 8dc6aade5b KVM: Introduce struct rtc_status
rtc_status is used to track RTC interrupt delivery status. The pending_eoi
will be increased by vcpu who received RTC interrupt and will be decreased
when EOI to this interrupt.
Also, we use dest_map to record the destination vcpu to avoid the case that
vcpu who didn't get the RTC interupt, but issued EOI with same vector of RTC
and descreased pending_eoi by mistake.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:33 -03:00
Yang Zhang 1fcc7890db KVM: Add vcpu info to ioapic_update_eoi()
Add vcpu info to ioapic_update_eoi, so we can know which vcpu
issued this EOI.

Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15 23:20:33 -03:00
Yang Zhang c7c9c56ca2 x86, apicv: add virtual interrupt delivery support
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:

- for pending interrupt, instead of direct injection, we may need
  update architecture specific indicators before resuming to guest.

- A pending interrupt, which is masked by ISR, should be also
  considered in above update action, since hardware will decide
  when to inject it at right time. Current has_interrupt and
  get_interrupt only returns a valid vector from injection p.o.v.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-29 10:48:19 +02:00
Michael S. Tsirkin 1a577b7247 KVM: fix race with level interrupts
When more than 1 source id is in use for the same GSI, we have the
following race related to handling irq_states race:

CPU 0 clears bit 0. CPU 0 read irq_state as 0. CPU 1 sets level to 1.
CPU 1 calls kvm_ioapic_set_irq(1). CPU 0 calls kvm_ioapic_set_irq(0).
Now ioapic thinks the level is 0 but irq_state is not 0.

Fix by performing all irq_states bitmap handling under pic/ioapic lock.
This also removes the need for atomics with irq_states handling.

Reported-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-20 16:12:00 -03:00
Michael S. Tsirkin a0c9a822bf KVM: dont clear TMR on EOI
Intel spec says that TMR needs to be set/cleared
when IRR is set, but kvm also clears it on  EOI.

I did some tests on a real (AMD based) system,
and I see same TMR values both before
and after EOI, so I think it's a minor bug in kvm.

This patch fixes TMR to be set/cleared on IRR set
only as per spec.

And now that we don't clear TMR, we can save
an atomic read of TMR on EOI that's not propagated
to ioapic, by checking whether ioapic needs
a specific vector first and calculating
the mode afterwards.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-16 20:36:38 -03:00
Marcelo Tosatti 46a47b1ed1 KVM: convert ioapic lock to spinlock
kvm_set_irq is used from non sleepable contexes, so convert ioapic from
mutex to spinlock.

KVM-Stable-Tag.
Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13 01:23:55 -03:00
Wei Yongjun 72bb2fcd23 KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrl
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Avi Kivity 46a929bc15 KVM: avoid taking ioapic mutex for non-ioapic EOIs
When the guest acknowledges an interrupt, it sends an EOI message to the local
apic, which broadcasts it to the ioapic.  To handle the EOI, we need to take
the ioapic mutex.

On large guests, this causes a lot of contention on this mutex.  Since large
guests usually don't route interrupts via the ioapic (they use msi instead),
this is completely unnecessary.

Avoid taking the mutex by introducing a handled_vectors bitmap.  Before taking
the mutex, check if the ioapic was actually responsible for the acked vector.
If not, we can return early.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:46 -03:00
Gleb Natapov eba0226bdf KVM: Move IO APIC to its own lock
The allows removal of irq_lock from the injection path.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:08 +02:00
Gleb Natapov 1a6e4a8c27 KVM: Move irq sharing information to irqchip level
This removes assumptions that max GSIs is smaller than number of pins.
Sharing is tracked on pin level not GSI level.

[avi: no PIC on ia64]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:06 +02:00
Gleb Natapov 58c2dde17d KVM: APIC: get rid of deliver_bitmask
Deliver interrupt during destination matching loop.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Gleb Natapov e1035715ef KVM: change the way how lowest priority vcpu is calculated
The new way does not require additional loop over vcpus to calculate
the one with lowest priority as one is chosen during delivery bitmap
construction.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Gleb Natapov 343f94fe4d KVM: consolidate ioapic/ipi interrupt delivery logic
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Gleb Natapov a53c17d21c KVM: ioapic/msi interrupt delivery consolidation
ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Sheng Yang 74a3a8f152 KVM: Merge kvm_ioapic_get_delivery_bitmask into kvm_get_intr_delivery_bitmask
Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask.

Sheng merged two functions, as well as fixed several issues in
kvm_get_intr_delivery_bitmask
1. deliver_bitmask is a bitmap rather than a unsigned long intereger.
2. Lowest priority target bitmap wrong calculated by mistake.
3. Prevent potential NULL reference.
4. Declaration in include/kvm_host.h caused powerpc compilation warning.
5. Add warning for guest broadcast interrupt with lowest priority delivery mode.
6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:26 +03:00
Sheng Yang 110c2faeba KVM: Update intr delivery func to accept unsigned long* bitmap
Would be used with bit ops, and would be easily extended if KVM_MAX_VCPUS is
increased.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:22 +03:00
Sheng Yang e5871be0f5 KVM: Change API of kvm_ioapic_get_delivery_bitmask
In order to use with bit ops.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:22 +03:00
Sheng Yang cf9e4e15e8 KVM: Split IOAPIC structure
Prepared for reuse ioapic_redir_entry for MSI.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:21 +03:00
Gleb Natapov 4925663a07 KVM: Report IRQ injection status to userspace.
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:11 +02:00
Sheng Yang 68b76f5167 KVM: Export ioapic_get_delivery_bitmask
It would be used for MSI in device assignment, for MSI dispatch.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Xiantao Zhang 2f74977191 KVM: Move irqchip_in_kernel() from ioapic.h to irq.h
Moving irqchip_in_kernel() from ioapic.h to irq.h.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:36 +02:00
Marcelo Tosatti f52447261b KVM: irq ack notification
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Zhang Xiantao 0eb8f49848 KVM: Move ioapic code to common directory.
Move ioapic code to common, since IA64 also needs it.

Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00