Commit Graph

129 Commits

Author SHA1 Message Date
Linus Torvalds b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Russell King 2facbc8873 ARM: debug: move 8250 debug include into arch/arm/include/debug/
Now that the 8250 debug include can stand alone without requiring
platforms to provide any macros, move it into the debug directory
so it can be directly included.  This allows us to get rid of a lot
of debug-macros include files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:11:02 +01:00
Russell King c3faa9b757 ARM: debug: provide 8250 debug uart phys/virt address configuration options
Move the definition of the UART register addresses out of the platform
specific header file into the Kconfig files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:11:01 +01:00
Russell King 4a00364736 ARM: debug: provide 8250 debug uart register shift configuration option
Move the definition of the UART register shift out of the platform
specific header file into the Kconfig files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:11:00 +01:00
Thomas Petazzoni c5d0ecc98c ARM: mv78xx0: Move to ID based window creation
With the introduction of the ID based MBus API, it's better
to switch to use it instead of the current name based scheme.

This will allow to deprecate the name based API, once every
user is removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:09 +00:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Thomas Petazzoni 95b80e0a9a arm: mach-mv78xx0: convert to use the mvebu-mbus driver
This commit convers the mach-mv78xx0 sub-architecture to use the
mvebu-mbus driver. We simply have to call mvebu_mbus_init() in the
->init_early() function, and modify the PCIe code so that it uses the
new functions provided by mvebu-mbus to create the needed PCIe
windows.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:39 +00:00
Olof Johansson b28eaacfbb The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure.  Samsung has some code setting up wdog
 in arch_decomp_wdog().  But since CONFIG_S3C_BOOT_WATCHDOG is defined
 nowhere, it will not run.  Otherwise, system can not boot at all when
 wdog is set up but no one pats it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ9WSiAAoJEFBXWFqHsHzOkpYH/iHOomqWknjg0YjeUKmoqnk+
 UnAiP/OD0pOuqdC3izSq5rAaxeCn2ESYhXWdHH3LQFNnhwDPOItagY3T1dBgJH0G
 KvO3wDj0K1jUM6Nzt4hta4pnCc/KClyCcVjYrP5pE+bs3NzOzxvfj2tPc81lI0Iy
 rnkMLWw6gVRllhecUezt3TOd/GfI7NwuyjjBOLelOerbImWFqLOCNIZSRQlazbyS
 hFh4OkR7yoU6vEvPdmS4B4A5PWBHlxiUS6Wr4v+doGFPiFgR05tJodLnnJ/KGWmG
 LFY99MyeBvcgiUlFcUpiVLYpWJh+7IB1LJH+IGNJbWFYC+Yvn/o9IRYO8kvuiYE=
 =weNJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

From Shawn Guo:
The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure.  Samsung has some code setting up wdog
in arch_decomp_wdog().  But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run.  Otherwise, system can not boot at all when
wdog is set up but no one pats it.

* tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: samsung: remove unused arch_decomp_wdog() code
  ARM: remove unused arch_decomp_wdog()
  ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-05 10:26:20 -08:00
Olof Johansson 8d84981e39 Merge branch 'clocksource/cleanup' into next/cleanup
Clockevent cleanup series from Shawn Guo.

Resolved move/change conflict in mach-pxa/time.c due to the sys_timer
cleanup.

* clocksource/cleanup:
  clocksource: use clockevents_config_and_register() where possible
  ARM: use clockevents_config_and_register() where possible
  clockevents: export clockevents_config_and_register for module use
  + sync to Linux 3.8-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-pxa/time.c
2013-01-14 10:20:02 -08:00
Shawn Guo b632a30e8b ARM: remove unused arch_decomp_wdog()
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c,
all the arch_decomp_wdog() definition at platform level is unneeded.
Remmove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-01-11 10:54:03 +08:00
Greg Kroah-Hartman 351a102dbf ARM: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Stephen Warren 6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Olof Johansson 0b33162ec5 Merge branch 'late/fixes' into fixes
This is a series from Arnd that fixes a number of compiler warnings
when building defconfigs on ARM.

* late/fixes:
  ARM: footbridge: nw_gpio_lock is raw_spin_lock
  ARM: mv78xx0: correct addr_map_cfg __initdata annotation
  ARM: footbridge: remove RTC_IRQ definition
  ARM: soc: dependency warnings for errata
  ARM: ks8695: __arch_virt_to_dma type handling
  ARM: rpc: check device_register return code in ecard_probe
  ARM: davinci: don't mark da850_register_cpufreq as __init
  ARM: iop13xx: fix iq81340sc_atux_map_irq prototype
  ARM: iop13xx: mark iop13xx_scan_bus as __devinit
  ARM: mv78xx0: mark mv78xx0_timer_init as __init_refok
  ARM: s3c24xx: fix multiple section mismatch warnings
  ARM: at91: unused variable in at91_pm_verify_clocks
  ARM: at91: skip at91_io_desc definition for NOMMU
  ARM: pxa: work around duplicate definition of GPIO24_SSP1_SFRM
  ARM: pxa: remove sharpsl_fatal_check function
  ARM: pxa: define palmte2_pxa_keys conditionally
  ARM: pxa: Wunused-result warning in viper board file
  ARM: shark: fix shark_pci_init return code

Fixed trivial conflicts in arch/arm/mach-at91/setup.c.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07 07:22:32 -07:00
Arnd Bergmann edc9e3334a ARM: mv78xx0: correct addr_map_cfg __initdata annotation
The annotation on the addr_map_cfg variable is in the wrong place.

Without this patch, building mv78xx0_defconfig results in:

/home/arnd/linux-arm/arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default]
/home/arnd/linux-arm/arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
2012-10-07 10:33:11 +02:00
Arnd Bergmann e7215fb33a ARM: mv78xx0: mark mv78xx0_timer_init as __init_refok
The sys_timer init function is only called at __init time,
so it's safe to mark mv78xx0_timer_init as __init_refok,
which allows us to call orion_time_init without getting
a link time warning.

Without this patch, building mv78xx0_defconfig results in:

WARNING: vmlinux.o(.text+0x15470): Section mismatch in reference from the function mv78xx0_timer_init() to the function .init.text:orion_time_init()
The function mv78xx0_timer_init() references
the function __init orion_time_init().
This is often because mv78xx0_timer_init lacks a __init
annotation or the annotation of orion_time_init is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
2012-10-07 10:33:07 +02:00
Olof Johansson 0d601f613b Merge branch 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux into late/kirkwood
* 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: add address decoding controller to the DT
  arm: mvebu: add basic address decoding support to Armada 370/XP
  arm: plat-orion: make bridge_virt_base non-const to support DT use case
  arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option
  arm: plat-orion: use void __iomem pointers for addr-map functions
  arm: plat-orion: use void __iomem pointers for time functions
  arm: plat-orion: use void __iomem pointers for MPP functions
  arm: plat-orion: use void __iomem pointers for UART registration functions
  arm: mach-mvebu: use IOMEM() for base address definitions
  arm: mach-orion5x: use IOMEM() for base address definitions
  arm: mach-mv78xx0: use IOMEM() for base address definitions
  arm: mach-kirkwood: use IOMEM() for base address definitions
  arm: mach-dove: use IOMEM() for base address definitions
  arm: mach-orion5x: use plus instead of or for address definitions
  arm: mach-mv78xx0: use plus instead of or for address definitions
  arm: mach-kirkwood: use plus instead of or for address definitions
  arm: mach-dove: use plus instead of or for address definitions

This branch had quite a few conflicts, in particular with the PCI static
map rework from Rob Herring, and a few other context conflicts due to
changes in Kconfig, etc.

I fixed up conflicts in:
	arch/arm/Kconfig
	arch/arm/mach-dove/common.c
	arch/arm/mach-dove/include/mach/dove.h
	arch/arm/mach-kirkwood/common.c
	arch/arm/mach-kirkwood/include/mach/kirkwood.h
	arch/arm/mach-mv78xx0/common.c
	arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
	arch/arm/mach-orion5x/common.c
	arch/arm/mach-orion5x/include/mach/orion5x.h

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 14:22:47 -07:00
Olof Johansson e3a66aa33a Merge branch 'multiplatform/platform-data' into next/multiplatform
* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 01:07:21 -07:00
Thomas Petazzoni 9b7b7d8b02 arm: plat-orion: use void __iomem pointers for addr-map functions
The functions for address mapping management now take void __iomem
pointers, so we remove the temporary "unsigned long" casts from the
mach-*/common.c files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:04:47 +00:00
Thomas Petazzoni e96a0309f8 arm: plat-orion: use void __iomem pointers for time functions
The functions for time management now take void __iomem pointers, so
we remove the temporary "unsigned long" casts from the mach-*/common.c
files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:04:39 +00:00
Thomas Petazzoni 5a2f550193 arm: plat-orion: use void __iomem pointers for MPP functions
The registration function for MPP now takes void __iomem pointers, so
we remove the temporary "unsigned long" casts from the mach-*/mpp.c
files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:04:24 +00:00
Thomas Petazzoni d19beac1d9 arm: plat-orion: use void __iomem pointers for UART registration functions
The registration functions for UARTs now take void __iomem pointers,
so we remove the temporary "unsigned long" casts from the
mach-*/common.c files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:04:14 +00:00
Thomas Petazzoni 383b99610e arm: mach-mv78xx0: use IOMEM() for base address definitions
We now define all virtual base address constants using IOMEM() so that
those are naturally typed as void __iomem pointers, and we do the
necessary adjustements in the mach-mv78xx0 code.

Note that we introduce a few temporary additional "unsigned long"
casts when calling into plat-orion functions. Those are removed by
followup patches converting plat-orion functions to void __iomem
pointers as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:03:44 +00:00
Thomas Petazzoni 5ae9f5dbb3 arm: mach-mv78xx0: use plus instead of or for address definitions
Since we are going to use IOMEM() to define many base virtual
addresses, we can no longer use binary or to define the individual
register addresses ("binary or" arithmetic on pointers is not
allowed). Instead, use the more conventional plus operator to do so.

The binary or operators were actually not useful because the low-order
bits of the base address were always zero, so the usage of the binary
or operators was effectively identical to a plus operator.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 18:03:04 +00:00
Olof Johansson 5ae8d15f68 Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.
 
 Multi-platform support is dependent on mach/gpio.h removal and
 restructuring of DEBUG_LL and dtb build rules included in this branch.
 
 This has been built for all defconfigs, and booted on highbank with
 all 5 platforms enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg
 nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z
 hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei
 cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA
 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt
 JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME=
 =HR3H
 -----END PGP SIGNATURE-----

Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform

Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.

Multi-platform support is dependent on mach/gpio.h removal and
restructuring of DEBUG_LL and dtb build rules included in this branch.

This has been built for all defconfigs, and booted on highbank with
all 5 platforms enabled.

By Rob Herring (18) and Arnd Bergmann (1)
via Rob Herring
* tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux:
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ARM: orion: move custom gpio functions to orion-gpio.h
  ARM: shmobile: move custom gpio functions to sh-gpio.h
  ARM: pxa: use gpio_to_irq for sharppm_sl
  net: pxaficp_ir: add irq resources
  usb: pxa27x_udc: remove IRQ_USB define
  staging: ste_rmi4: remove gpio.h include

Conflicts due to addition of bcm2835 and removal of pnx4008 in:
	arch/arm/Kconfig
	arch/arm/Makefile

Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in:
	arch/arm/mach-imx/Makefile.boot
	arch/arm/mach-mxs/Makefile.boot
	arch/arm/mach-tegra/Makefile.boot

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20 22:54:07 -07:00
Arnd Bergmann c02cecb92e ARM: orion: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the orion include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
2012-09-19 17:42:17 +02:00
Rob Herring ce91574c20 ARM: orion: move custom gpio functions to orion-gpio.h
Move custom orion platforms gpio code to orion-gpio to remove the
dependency on mach/gpio.h.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-14 09:21:59 -05:00
Olof Johansson 025c95a682 Merge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanup
* 'clk' of git://github.com/hzhuang1/linux:
  ARM: mmp: remove unused definition in APBC and APMU
  ARM: mmp: move mmp2 clock definition to separated file
  arm: mmp: move pxa910 clock definition to separated file
  arm: mmp: move pxa168 clock definition to separated file
  arm: mmp: make private clock definition exclude from common clock
  + Linux 3.6-rc4
2012-09-12 22:34:11 -07:00
Arnd Bergmann 0a224c514f Merge branch 'fixes-for-v3.6' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper <jason@lakedaemon.net>:

Small fixes for the orion platforms including kirkwood.

* 'fixes-for-v3.6' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: fix Makefile.boot
  ARM: Kirkwood: Fix iconnect leds
  ARM: Orion: Set eth packet size csum offload limit

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-15 18:18:29 +02:00
Arnaud Patard (Rtp) 58569aee5a ARM: Orion: Set eth packet size csum offload limit
The mv643xx ethernet controller limits the packet size for the TX
checksum offloading. This patch sets this limits for Kirkwood and
Dove which have smaller limits that the default.

As a side note, this patch is an updated version of a patch sent some years
ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html
which seems to have been lost.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Cc: <stable@vger.kernel.org>
2012-08-15 13:58:09 +00:00
Arnd Bergmann e18287d301 ARM: mv78xx0: fix win_cfg_base prototype
Patch b6d1c33a31 "ARM: Orion: Consolidate the address map setup" tried
to merge the address map for the four orion platforms, but apparently
got it wrong for mv78xx0. Admittedly I don't understand what this
code actually does, but it's clear that the current version is
wrong.

Without this patch, building mv78xx0_defconfig results in:

arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default]
arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Michael Walle <michael@walle.cc>
Cc: Nicolas Pitre <nico@linaro.org>
2012-08-13 21:11:28 +02:00
Arnd Bergmann 19ec6caca2 Merge branch 'cleanup/io-pci' into next/cleanups
From Rob Herring <robherring2@gmail.com>:

This is the 2nd part of mach/io.h removals. This series removes io.h on
platforms with PCI by creating a fixed virtual I/O mapping and a common
__io() macro.

This version has changed a bit to accommodate Tegra converting its PCIe
host to a platform driver. Now the virtual space is only reserved during
early boot before .map_io() is called. The mapping is not created until
calling pci_ioremap_io which can be done at any point after vmalloc is
initialized.

I've gone back to fixed 64K windows for each PCI bus. This allows
removing all the i/o resource setup from the individually platforms and
placing it within the common ARM PCI code.

I've only tested versatilepb under qemu (with the model hacked up to
actually enable i/o space), so any testing is appreciated. iop3xx and
mv78xx0 have some risk of breaking as the PCI bus addresses are moved
to 0 from matching the cpu host bus addesss.

* cleanup/io-pci:
  ARM: iop3xx: use fixed PCI i/o mapping
  ARM: mv78xx0: use fixed pci i/o mapping
  ARM: iop13xx: use fixed PCI i/o mapping
  iop13xx: use more regular PCI I/O space handling
  ARM: orion5x: use fixed PCI i/o mapping
  ARM: kirkwood: use fixed PCI i/o mapping
  ARM: dove: use fixed PCI i/o mapping
  ARM: footbridge: use fixed PCI i/o mapping
  ARM: shark: use fixed PCI i/o mapping
  ARM: integrator: remove trailing whitespace on pci_v3.c
  ARM: integrator: use fixed PCI i/o mapping
  ARM: tegra: use fixed PCI i/o mapping
  ARM: versatile: use fixed PCI i/o mapping
  ARM: move PCI i/o resource setup into common code
  ARM: Add fixed PCI i/o mapping
  i2c: iop3xx: use standard gpiolib functions
  i2c: iop3xx: clean-up trailing whitespace

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13 16:56:29 +02:00
Andrew Lunn 278b45b06b ARM: Orion: DT support for IRQ and GPIO Controllers
Both IRQ and GPIO controllers can now be represented in DT.  The IRQ
controllers are setup first, and then the GPIO controllers. Interrupts
for GPIO lines are placed directly after the main interrupts in the
interrupt space.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Josh Coombs <josh.coombs@gmail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:48:14 +02:00
Rob Herring 0b9b18e016 ARM: mv78xx0: use fixed pci i/o mapping
Move mv78xx0 PCI to fixed i/o mapping and remove io.h. This changes the PCI
bus addresses from the cpu address to 0 based. It appears that there is
translation h/w for this, but its untested.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-07-26 09:10:03 -05:00
Andrew Lunn 1e0c1ce00d ARM: Orion: Fix WDT compile for Dove and MV78xx0
Commit 0fa1f0609a (ARM: Orion: Fix
Virtual/Physical mixup with watchdog) broke the Dove & MV78xx0
build. Although these two SoC don't use the watchdog, the shared
platform code still needs to build. Add the necessary defines.

Cc: stable@vger.kernel.org
Reported-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-04 10:37:34 +02:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Russell King 43ba990bb7 ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
Use sys->private_data to store the PCIe port data structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-16 15:24:11 +01:00
Russell King daeb4c0c3b ARM: PCI: get rid of pci_std_swizzle()
Most PCI implementations use the standard PCI swizzle function, which
handles the well defined behaviour of PCI-to-PCI bridges which can be
found on cards (eg, four port ethernet cards.)

Rather than having almost every platform specify the standard swizzle
function, make this the default when no swizzle function is supplied.
Therefore, a swizzle function only needs to be provided when there is
something exceptional which needs to be handled.

This gets rid of the swizzle initializer from 47 files, and leaves us
with just two platforms specifying a swizzle function: ARM Integrator
and Chalice CATS.

Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13 17:12:16 +01:00
Andrew Lunn 74c335761a ARM: Orion: UART: Get the clock rate via clk_get_rate().
Let the machine pass to the platform which clock is used by the uart.
Enable the clock and use clk_get_rate() to determine its rate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:57 -07:00
Andrew Lunn 452503ebc7 ARM: Orion: Eth: Add clk/clkdev support.
The t_clk is moved from the shared part of the ethernet driver into
the per port section. Each port can have its own gated clock, which it
needs to enable/disable, as oppossed to there being one clock shared
by all ports. In practice, only kirkwood supports this at the moment.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:56 -07:00
Andrew Lunn 4574b88669 ARM: Orion: SPI: Add clk/clkdev support.
Remove now redundant tclk from SPI platform data. This makes the platform
data empty, so remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:55 -07:00
Andrew Lunn 2f129bf4aa ARM: Orion: Add clocks using the generic clk infrastructure.
Add tclk as a fixed rate clock for all platforms. In addition, on
kirkwood, add a gated clock for most of the clocks which can be gated.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
[mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig]
[mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:39 -07:00
Linus Torvalds 820d41cf0c ARM: cleanups of io includes
Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes,
 moving some of the oft-repeated macros to a common location and removing a bunch of
 boiler plate. This is another step closer to a common zImage for multiple platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcpqHAAoJEIwa5zzehBx3xCMP/2evrPQyorzMBztrFB4Ry9Ol
 qNkSVNsemZjdtkY2dnJv+zJ/Xb0PPDU9EuBHr/SpqmVrRZEZeJND42wZK/OTFCBZ
 Ufi7KP1qE30daO5H3YmL+58/Ixir5fTHqggqolHhTcEYU2hnHgLBI4rIFu92kSO7
 TMyrAUs14jSkTVZc6HSF83w3PfQWhMzWvspJVHQ6RebZRruETAr7v9weVMbgxcDk
 jQ5XJ9y73rGs2AF8bZTpUdFPzkcac7UiHn3/XyqoZs8RNCL98BGpskzhILyTARf5
 X90c9mqQF+AEbb9QSDDd52uYFsJ/5COJvWdlExRI9gZZDI8Pd05ijZBR9IdGJg/B
 NsVsl98wvZ/zjHJ/Sb2qt5ruet7PiQUGhkshB42jVHsaWfRM030sKGYxQ8pX5Tsa
 cSagnfBCvAZ9VjDLkXrnEbWRNTz8LSwn9l63z0jmtm5D8+vbpMtgvtWARtuZ4RNn
 D8wIWoyT0ytVZnosu5441TEgCejtcKOEFzThvKDYMeMJZ/rqVkAbcznapoC2qUd4
 fceNlLfQFvW7xpY1MY8mhlwC0ki4hM9MSDieaXUyefvAU/hoSp8MveVUH5UspYfb
 0FpkEhzklW/g0/fuq0DJQIrMn7dajjUvVZIUQtiVQuFHOr6RUbFG5vmXuCbAyx10
 PE2K4rnKz+PC8bKab7v9
 =YIsn
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: cleanups of io includes" from Olof Johansson:
 "Rob Herring has done a sweeping change cleaning up all of the
  mach/io.h includes, moving some of the oft-repeated macros to a common
  location and removing a bunch of boiler plate.  This is another step
  closer to a common zImage for multiple platforms."

Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: tegra: Include assembler.h in sleep.S to fix build break
  ARM: pxa: use common IOMEM definition
  ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
  ARM: __io abuse cleanup
  ARM: create a common IOMEM definition
  ARM: iop13xx: fix missing declaration of iop13xx_init_early
  ARM: fix ioremap/iounmap for !CONFIG_MMU
  ARM: kill off __mem_pci
  ARM: remove bunch of now unused mach/io.h files
  ARM: make mach/io.h include optional
  ARM: clps711x: remove unneeded include of mach/io.h
  ARM: dove: add explicit include of dove.h to addr-map.c
  ARM: at91: add explicit include of hardware.h to uncompressor
  ARM: ep93xx: clean-up mach/io.h
  ARM: tegra: clean-up mach/io.h
  ARM: orion5x: clean-up mach/io.h
  ARM: davinci: remove unneeded mach/io.h include
  [media] davinci: remove includes of mach/io.h
  ARM: OMAP: Remove remaining includes for mach/io.h
  ARM: msm: clean-up mach/io.h
  ...
2012-03-29 18:02:10 -07:00
Linus Torvalds 56c10bf82c Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm
Pull #1 ARM updates from Russell King:
 "This one covers stuff which Arnd is waiting for me to push, as this is
  shared between both our trees and probably other trees elsewhere.

  Essentially, this contains:
   - AMBA primecell device initializer updates - mostly shrinking the
     size of the device declarations in platform code to something more
     reasonable.
   - Getting rid of the NO_IRQ crap from AMBA primecell stuff.
   - Nicolas' idle cleanups.  This in combination with the restart
     cleanups from the last merge window results in a great many
     mach/system.h files being deleted."

Yay: ~80 files, ~2000 lines deleted.

* 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits)
  ARM: remove disable_fiq and arch_ret_to_user macros
  ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER
  ARM: rpc: make default fiq handler run-time installed
  ARM: make arch_ret_to_user macro optional
  ARM: amba: samsung: use common amba device initializers
  ARM: amba: spear: use common amba device initializers
  ARM: amba: nomadik: use common amba device initializers
  ARM: amba: u300: use common amba device initializers
  ARM: amba: lpc32xx: use common amba device initializers
  ARM: amba: netx: use common amba device initializers
  ARM: amba: bcmring: use common amba device initializers
  ARM: amba: ep93xx: use common amba device initializers
  ARM: amba: omap2: use common amba device initializers
  ARM: amba: integrator: use common amba device initializers
  ARM: amba: realview: get rid of private platform amba_device initializer
  ARM: amba: versatile: get rid of private platform amba_device initializer
  ARM: amba: vexpress: get rid of private platform amba_device initializer
  ARM: amba: provide common initializers for static amba devices
  ARM: amba: make use of -1 IRQs warn
  ARM: amba: u300: get rid of NO_IRQ initializers
  ...
2012-03-23 17:30:49 -07:00
Linus Torvalds 475c77edf8 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
Pull PCI changes (including maintainer change) from Jesse Barnes:
 "This pull has some good cleanups from Bjorn and Yinghai, as well as
  some more code from Yinghai to better handle resource re-allocation
  when enabled.

  There's also a new initcall_debug feature from Arjan which will print
  out quirk timing information to help identify slow quirks for fixing
  or refinement (Yinghai sent in a few patches to do just that once the
  new debug code landed).

  Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
  He's been a core PCI and Linux contributor for some time now, and has
  kindly volunteered to take over.  I just don't feel I have the time
  for PCI review and work that it deserves lately (I've taken on some
  other projects), and haven't been as responsive lately as I'd like, so
  I approached Bjorn asking if he'd like to manage things.  He's going
  to give it a try, and I'm confident he'll do at least as well as I
  have in keeping the tree managed, patches flowing, and keeping things
  stable."

Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
  PCI: Bjorn gets PCI hotplug too
  PCI: hand PCI maintenance over to Bjorn Helgaas
  unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
  sparc/PCI: convert devtree and arch-probed bus addresses to resource
  powerpc/PCI: allow reallocation on PA Semi
  powerpc/PCI: convert devtree bus addresses to resource
  powerpc/PCI: compute I/O space bus-to-resource offset consistently
  arm/PCI: don't export pci_flags
  PCI: fix bridge I/O window bus-to-resource conversion
  x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
  PCI / PCIe: Introduce command line option to disable ARI
  PCI: make acpihp use __pci_remove_bus_device instead
  PCI: export __pci_remove_bus_device
  PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
  PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
  PCI: print out PCI device info along with duration
  PCI: Move "pci reassigndev resource alignment" out of quirks.c
  PCI: Use class for quirk for usb host controller fixup
  PCI: Use class for quirk for ti816x class fixup
  PCI: Use class for quirk for intel e100 interrupt fixup
  ...
2012-03-23 14:02:12 -07:00
Rob Herring 5621caac1d ARM: kill off __mem_pci
__mem_pci is only used to enable readl/writel and friends. Just condition
this on readl being defined and remove all the __mem_pci defines.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Stephen Warren <swarren@nvidia.com>
2012-03-06 21:34:45 -06:00
Bjorn Helgaas 9f786d033d arm/PCI: get rid of device resource fixups
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:19:01 -07:00
Russell King 61b80086a5 Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux into for-armsoc 2012-02-22 22:04:41 +00:00
Rob Herring 230f984662 ARM: remove disable_fiq and arch_ret_to_user macros
Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-21 17:05:18 -06:00
Andrew Lunn 7205335358 ARM: orion: Fix USB phy for orion5x.
The patch "ARM: orion: Consolidate USB platform setup code.", commit
4fcd3f374a broke USB on TS-7800 and
other orion5x boards, because the wrong type of PHY was being passed
to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION
and all the others want EHCI_PHY_NA.

Allow the mach- code to tell the generic plat-orion code which USB PHY
enum to place into the platform data.

Version 2: Rebase to v3.3-rc2.

Reported-by: Ambroz Bizjak <ambrop7@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Ambroz Bizjak <ambrop7@gmail.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-09 16:16:35 -08:00
Andrew Lunn b065403710 ARM: orion: Fix Orion5x GPIO regression from MPP cleanup
Patchset "ARM: orion: Refactor the MPP code common in the orion
platform" broke at least Orion5x based platforms. These platforms have
pins configured as GPIO when the selector is not 0x0. However the
common code assumes the selector is always 0x0 for a GPIO lines. It
then ignores the GPIO bits in the MPP definitions, resulting in that
Orion5x machines cannot correctly configure there GPIO lines.

The Fix removes the assumption that the selector is always 0x0.
In order that none GPIO configurations are correctly blocked,
Kirkwood and mv78xx0 MPP definitions are corrected to only set the
GPIO bits for GPIO configurations.

This third version, which does not contain any whitespace changes,
and is rebased on v3.3-rc2.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-09 16:16:31 -08:00