Commit Graph

101 Commits

Author SHA1 Message Date
Alan Jenkins 9e1b9b8072 module: make MODULE_SYMBOL_PREFIX into a CONFIG option
The next commit will require the use of MODULE_SYMBOL_PREFIX in
.tmp_exports-asm.S.  Currently it is mixed in with C structure
definitions in "asm/module.h".  Move the definition of this arch option
into Kconfig, so it can be easily accessed by any code.

This also lets modpost.c use the same definition.  Previously modpost
relied on a hardcoded list of architectures in mk_elfconfig.c.

A build test for blackfin, one of the two MODULE_SYMBOL_PREFIX archs,
showed the generated code was unchanged.  vmlinux was identical save
for build ids, and an apparently randomized suffix on a single "__key"
symbol in the kallsyms data).

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org> (blackfin)
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-12-15 16:28:26 +10:30
Tim Abbott 1b2086227c Optimize the ordering of sections in RW_DATA_SECTION.
The old RW_DATA_SECTION had INIT_TASK_DATA (which was
more-than-PAGE_SIZE-aligned), followed by a bunch of small alignment
stuff, followed by more PAGE_SIZE-aligned stuff, so you wasted memory
in the middle of .data re-aligning back up to PAGE_SIZE.

This patch sorts the sections by alignment requirements, which should
pack them essentially optimally.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 17:16:21 -07:00
Ingo Molnar 45bd00d31d Merge branch 'linus' into tracing/core
Merge reason: Pick up kernel/softirq.c update for dependent fix.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17 20:53:10 +02:00
John Reiser 4b3b4c5e64 ftrace: __start_mcount_loc should be .init.rodata
__start_mcount_loc[] is unused after init, yet occupies RAM forever
as part of .rodata.  152kiB is typical on a 64-bit architecture.  Instead,
__start_mcount_loc should be in the interval [__init_begin, __init_end)
so that the space is reclaimed after init.

__start_mcount_loc[] is generated during the load portion
of kernel build, and is used only by ftrace_init().  ftrace_init is declared
'__init' and is in .init.text, which is freed after init.
__start_mcount_loc is placed into .rodata by a call to MCOUNT_REC inside
the RO_DATA macro of include/asm-generic/vmlinux.lds.h.  The array *is*
read-only, but more importantly it is not used after init.  So the call to
MCOUNT_REC should be moved from RO_DATA to INIT_DATA.

This patch has been tested on x86_64 with CONFIG_DEBUG_PAGEALLOC=y
which verifies that the address range never is accessed after init.

Signed-off-by: John Reiser <jreiser@BitWagon.com>
LKML-Reference: <4A6DF0B6.7080402@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-12 21:57:29 -04:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Tim Abbott 04e448d9a3 vmlinux.lds.h: restructure BSS linker script macros
The BSS section macros in vmlinux.lds.h currently place the .sbss
input section outside the bounds of [__bss_start, __bss_end].  On all
architectures except for microblaze that handle both .sbss and
__bss_start/__bss_end, this is wrong: the .sbss input section is
within the range [__bss_start, __bss_end].  Relatedly, the example
code at the top of the file actually has __bss_start/__bss_end defined
twice; I believe the right fix here is to define them in the
BSS_SECTION macro but not in the BSS macro.

Another problem with the current macros is that several
architectures have an ALIGN(4) or some other small number just before
__bss_stop in their linker scripts.  The BSS_SECTION macro currently
hardcodes this to 4; while it should really be an argument.  It also
ignores its sbss_align argument; fix that.

mn10300 is the only user at present of any of the macros touched by
this patch.  It looks like mn10300 actually was incorrectly converted
to use the new BSS() macro (the alignment of 4 prior to conversion was
a __bss_stop alignment, but the argument to the BSS macro is a start
alignment).  So fix this as well.

I'd like acks from Sam and David on this one.  Also CCing Paul, since
he has a patch from me which will need to be updated to use
BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-18 00:02:45 +02:00
Tejun Heo 023bf6f1b8 linker script: unify usage of discard definition
Discarded sections in different archs share some commonality but have
considerable differences.  This led to linker script for each arch
implementing its own /DISCARD/ definition, which makes maintaining
tedious and adding new entries error-prone.

This patch makes all linker scripts to move discard definitions to the
end of the linker script and use the common DISCARDS macro.  As ld
uses the first matching section definition, archs can include default
discarded sections by including them earlier in the linker script.

ia64 is notable because it first throws away some ia64 specific
subsections and then include the rest of the sections into the final
image, so those sections must be discarded before the inclusion.

defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64,
alpha, sparc, sparc64 and s390.  Michal Simek tested microblaze.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
2009-07-09 11:27:40 +09:00
Linus Torvalds 29f31773e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: finally remove the obsolete variable $TOPDIR
  gitignore: ignore scripts/ihex2fw
  Kbuild: Disable the -Wformat-security gcc flag
  gitignore: ignore gcov output files
  kbuild: deb-pkg ship changelog
  Add new __init_task_data macro to be used in arch init_task.c files.
  asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h
  Add new macros for page-aligned data and bss sections.
  asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04 09:46:01 -07:00
Tejun Heo c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Heiko Carstens 2a2325e6e8 gcov: fix __ctors_start alignment
The ctors section for each object file is eight byte aligned (on 64 bit).
However the __ctors_start symbol starts at an arbitrary address dependent
on the size of the previous sections.

Therefore the linker may add some zeroes after __ctors_start to make sure
the ctors contents are properly aligned.  However the extra zeroes at the
beginning aren't expected by the code.  When walking the functions
pointers contained in there and extra zeroes are added this may result in
random jumps.  So make sure that the __ctors_start symbol is always
aligned as well.

Fixes this crash on an allyesconfig on s390:

[    0.582482] Kernel BUG at 0000000000000012 [verbose debug info unavailable]
[    0.582489] illegal operation: 0001 [#1] SMP DEBUG_PAGEALLOC
[    0.582496] Modules linked in:
[    0.582501] CPU: 0 Tainted: G        W  2.6.31-rc1-dirty #273
[    0.582506] Process swapper (pid: 1, task: 000000003f218000, ksp: 000000003f2238e8)
[    0.582510] Krnl PSW : 0704200180000000 0000000000000012 (0x12)
[    0.582518]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
[    0.582524] Krnl GPRS: 0000000000036727 0000000000000010 0000000000000001 0000000000000001
[    0.582529]            00000000001dfefa 0000000000000000 0000000000000000 0000000000000040
[    0.582534]            0000000001fff0f0 0000000001790628 0000000002296048 0000000002296048
[    0.582540]            00000000020c438e 0000000001786000 0000000002014a66 000000003f223e60
[    0.582553] Krnl Code:>0000000000000012: 0000                unknown
[    0.582559]            0000000000000014: 0000                unknown
[    0.582564]            0000000000000016: 0000                unknown
[    0.582570]            0000000000000018: 0000                unknown
[    0.582575]            000000000000001a: 0000                unknown
[    0.582580]            000000000000001c: 0000                unknown
[    0.582585]            000000000000001e: 0000                unknown
[    0.582591]            0000000000000020: 0000                unknown
[    0.582596] Call Trace:
[    0.582599] ([<0000000002014a46>] kernel_init+0x622/0x7a0)
[    0.582607]  [<0000000000113e22>] kernel_thread_starter+0x6/0xc
[    0.582615]  [<0000000000113e1c>] kernel_thread_starter+0x0/0xc
[    0.582621] INFO: lockdep is turned off.
[    0.582624] Last Breaking-Event-Address:
[    0.582627]  [<0000000002014a64>] kernel_init+0x640/0x7a0

Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:59 -07:00
Tim Abbott 39a449d96a asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h
We recently added a INIT_TASK(align) in include/asm-generic/vmlinux.lds.h,
but there is already a macro INIT_TASK in include/linux/init_task.h, which
is quite confusing.  We should switch the macro in the linker script to
INIT_TASK_DATA. (Sorry that I missed this in reviewing the patch).  Since
the macros are new, there is only one user of the INIT_TASK in
vmlinux.lds.h, arch/mn10300/kernel/vmlinux.lds.S.

However, we are currently using INIT_TASK_DATA for laying down an entire
.data.init_task section.  So rename that to INIT_TASK_DATA_SECTION.

I would be worried about changing the meaning of INIT_TASK_DATA, but the
old INIT_TASK_DATA implementation had no users, and in fact if anyone had
tried to use it, it would have failed to compile because it didn't pass
the alignment to the old INIT_TASK.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jesper Nilsson <Jesper.Nilsson@axis.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:04:50 +02:00
Paul Mundt 73f1d9391a asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
RW_DATA_SECTION is defined to take 4 different alignment parameters,
while NOSAVE_DATA currently uses a fixed PAGE_SIZE alignment as noted
in the comments.

There are presently no in-tree users of this at present, and I just
stumbled across this while implementing the simplified script on a new
architecture port, which subsequently resulted in a syntax error.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-26 23:55:27 +02:00
Tejun Heo 405d967dc7 linker script: throw away .discard section
x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:13:38 +09:00
David Howells eadfe21989 LDSCRIPT: Name INIT_RAM_FS consistently
In asm-generic/vmlinux.lds.h, name INIT_RAM_FS consistently, no matter the
setting of CONFIG_BLK_DEV_INITRD.  This corrects:

	commit ef53dae865
	Author: Sam Ravnborg <sam@ravnborg.org>
	Date:   Sun Jun 7 20:46:37 2009 +0200
	Subject: Improve vmlinux.lds.h support for arch specific linker scripts

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 13:34:49 -07:00
Peter Oberparleiter b99b87f70c kernel: constructor support
Call constructors (gcc-generated initcall-like functions) during kernel
start and module load.  Constructors are e.g.  used for gcov data
initialization.

Disable constructor support for usermode Linux to prevent conflicts with
host glibc.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00
Linus Torvalds 45e3e1935e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
  .gitignore: ignore *.lzma files
  kbuild: add generic --set-str option to scripts/config
  kbuild: simplify argument loop in scripts/config
  kbuild: handle non-existing options in scripts/config
  kallsyms: generalize text region handling
  kallsyms: support kernel symbols in Blackfin on-chip memory
  documentation: make version fix
  kbuild: fix a compile warning
  gitignore: Add GNU GLOBAL files to top .gitignore
  kbuild: fix delay in setlocalversion on readonly source
  README: fix misleading pointer to the defconf directory
  vmlinux.lds.h update
  kernel-doc: cleanup perl script
  Improve vmlinux.lds.h support for arch specific linker scripts
  kbuild: fix headers_exports with boolean expression
  kbuild/headers_check: refine extern check
  kbuild: fix "Argument list too long" error for "make headers_check",
  ignore *.patch files
  Remove bashisms from scripts
  menu: fix embedded menu presentation
  ...
2009-06-14 14:12:18 -07:00
Sam Ravnborg 7923f90fff vmlinux.lds.h update
Updated after review by Tim Abbott.
- Use HEAD_TEXT_SECTION
- Drop use of section-names.h and delete file
- Introduce EXIT_CALL

Deleting section-names.h required a few simple
updates of init.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@ksplice.com>
2009-06-14 22:10:41 +02:00
Sam Ravnborg ef53dae865 Improve vmlinux.lds.h support for arch specific linker scripts
To support alingment of the individual architecture specific linker scripts
provide a set of general definitions in vmlinux.lds.h

With these definitions applied the diverse linekr scripts can be reduced
in line count and their readability are improved - IMO.

A sample linker script is included to give the preferred
order of the sections for the architectures that do not
have any special requirments.

These definitions are also a first step towards eventual
support for -ffunction-sections.
The definitions makes it much easier to do a global
renaming of section names - but the main purpose is
to clean up the linker scripts.

Tim Aboot has provided a lot of inputs to improve
the definitions - all faults are mine.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@mit.edu>
2009-06-09 23:02:22 +02:00
Jan Beulich fd6c3a8dc4 initconst adjustments
- add .init.rodata to INIT_DATA, and group all initconst flavors
  together
- move strings generated from __setup_param() into .init.rodata
- add .*init.rodata to modpost's sets of init sections
- make modpost warn about references between meminit and cpuinit
  as well as memexit and cpuexit sections (as CPU and memory
  hotplug are independently selectable features)

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:43 +02:00
Ingo Molnar 44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
Tim Abbott 27b1833279 Remove unused support code for refok sections.
The old refok sections

  .text.init.refok
  .data.init.refok
  .exit.text.refok

have been deprecated since commit
312b1485fb.  After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27 19:51:58 -07:00
Tim Abbott c80d471a47 Add new HEAD_TEXT_SECTION macro.
This patch is preparation for replacing all uses of ".head.text" or
".text.head" in the kernel with macros, so that the section name can
later be changed without having to touch a lot of the kernel.

Since some linker scripts do more complex things than referencing
HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the
actual name.

I've defined HEAD_TEXT_SECTION in a new header,
include/linux/section-names.h, so that this section name only needs to
appear in one place.  I anticipate creating similar macro structures
for a number of other section names.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".text.foo".

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-26 09:20:38 -07:00
Tom Zanussi 5f77a88b3f tracing/infrastructure: separate event tracer from event support
Add a new config option, CONFIG_EVENT_TRACING that gets selected
when CONFIG_TRACING is selected and adds everything needed by the stuff
in trace_export - basically all the event tracing support needed by e.g.
bprint, minus the actual events, which are only included if
CONFIG_EVENT_TRACER is selected.

So CONFIG_EVENT_TRACER can be used to turn on or off the generated events
(what I think of as the 'event tracer'), while CONFIG_EVENT_TRACING turns
on or off the base event tracing support used by both the event tracer and
the other things such as bprint that can't be configured out.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178441.10295.34.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-14 00:00:55 +02:00
Ingo Molnar 8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Jason Baron e9d376f0fa dynamic debug: combine dprintk and dynamic printk
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.

The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.

for example, enabled all debug messages in module 'nf_conntrack':

echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control

to disable them:

echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control

A further explanation can be found in the documentation patch.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Frederic Weisbecker bed1ffca02 tracing/syscalls: core infrastructure for syscalls tracing, enhancements
Impact: new feature

This adds the generic support for syscalls tracing. This is
currently exploited through a devoted tracer but other tracing
engines can use it. (They just have to play with
{start,stop}_ftrace_syscalls() and use the display callbacks
unless they want to override them.)

The syscalls prototypes definitions are abused here to steal
some metadata informations:

- syscall name, param types, param names, number of params

The syscall addr is not directly saved during this definition
because we don't know if its prototype is available in the
namespace. But we don't really need it. The arch has just to
build a function able to resolve the syscall number to its
metadata struct.

The current tracer prints the syscall names, parameters names
and values (and their types optionally). Currently the value is
a raw hex but higher level values diplaying is on my TODO list.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236955332-10133-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 16:57:42 +01:00
Ingo Molnar 12e87e36e0 Merge branches 'tracing/doc', 'tracing/ftrace', 'tracing/printk' and 'linus' into tracing/core 2009-03-10 09:56:25 +01:00
Ingo Molnar 8a20d84d09 tracing: trace_printk() fix, move format array to data section
Impact: fix kernel crash when using trace_printk()

trace_printk_fmt section is defined into the readonly section.
But we do:

	trace_printk_fmt = fmt;

to fill in that table of format strings - which is not read-only.
Under CONFIG_DEBUG_RODATA=y this crashes ...

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-09 10:11:08 +01:00
Ingo Molnar dba58e39ce Merge branches 'tracing/doc', 'tracing/ftrace', 'tracing/printk' and 'tracing/textedit' into tracing/core 2009-03-08 16:48:51 +01:00
Lai Jiangshan 1ba28e02a1 tracing: add trace_bprintk()
Impact: add a generic printk() for tracing, like trace_printk()

trace_bprintk() uses the infrastructure to record events on ring_buffer.

[ fweisbec@gmail.com: ported to latest -tip, made it work if
  !CONFIG_MODULES, never free the format strings from modules
  because we can't keep track of them and conditionnaly create
  the ftrace format strings section (reported by Steven Rostedt) ]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 17:59:11 +01:00
Ingo Molnar f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Steven Rostedt b77e38aa24 tracing: add event trace infrastructure
This patch creates the event tracing infrastructure of ftrace.
It will create the files:

 /debug/tracing/available_events
 /debug/tracing/set_event

The available_events will list the trace points that have been
registered with the event tracer.

set_events will allow the user to enable or disable an event hook.

example:

 # echo sched_wakeup > /debug/tracing/set_event

Will enable the sched_wakeup event (if it is registered).

 # echo "!sched_wakeup" >> /debug/tracing/set_event

Will disable the sched_wakeup event (and only that event).

 # echo > /debug/tracing/set_event

Will disable all events (notice the '>')

 # cat /debug/tracing/available_events > /debug/tracing/set_event

Will enable all registered event hooks.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-24 21:54:05 -05:00
Tejun Heo 3ac6cffea4 linker script: use separate simpler definition for PERCPU()
Impact: fix linker screwup on x86_32

Recent x86_64 zerobased patches introduced PERCPU_VADDR() to put
.data.percpu to a predefined address and re-defined PERCPU() in terms
of it.  The new macro defined one extra symbol, __per_cpu_load, for
LMA of the section so that the init data could be accessed.  This new
symbol introduced the following problems to x86_32.

1. If __per_cpu_load is defined outside of .data.percpu as an absolute
   symbol, relocation generation for relocatable kernel fails due to
   absolute relocation.

2. If __per_cpu_load is put inside .data.percpu with absolute address
   assignment to work around #1, linker gets confused and under
   certain configurations ends up relocating the symbol against
   .data.percpu such that the load address gets added on top of
   already set load address.

As x86_32 doesn't use predefined address for .data.percpu, there's no
need for it to care about the possibility of __per_cpu_load being
different from __per_cpu_start.

This patch defines PERCPU() separately so that __per_cpu_load is
defined inside .data.percpu so that everything is ordinary
linking-wise.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 23:27:46 +01:00
Ingo Molnar dba3d36b2f Revert "generic, x86: fix __per_cpu_load relocation"
This reverts commit 5a611268b6.

It is causing occasional boot crashes, caused by certain
linker versions (GNU ld version 2.18.50.0.6-2 20080403) messing up:

 82dcc000 D __per_cpu_load
 c16e6000 A __per_cpu_load_abs

The __per_cpu_load value is out of whack. Hpa noticed the following
detail:

  * (gdb) p/x -(0xc16e6000-0x82dcc000)
  * $2 = 0xc16e6000
  * I.e. one is the other << 1

The two symbols should be equal.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 17:18:54 +01:00
Brian Gerst 5a611268b6 generic, x86: fix __per_cpu_load relocation
This patch fixes this linker error:

 WARNING: Absolute relocations present
 Offset     Info     Type     Sym.Value Sym.Name
 c0a4e07d 00e78001   R_386_32 c0ab0000  __per_cpu_load

Now, __per_cpu_load is a section-relative symbol:

 c0aa4000 D __per_cpu_load
 c0aa4000 A __per_cpu_load_abs

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 15:18:10 +01:00
Tejun Heo 6b7c38d555 linker script: kill PERCPU_VADDR_PREALLOC()
Impact: cleanup

With .data.percpu.first in place, PERCPU_VADDR_PREALLOC() is no longer
necessary.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20 12:29:20 +09:00
Brian Gerst 0bd74fa8e2 percpu: refactor percpu.h
Impact: cleanup

Refactor the DEFINE_PER_CPU_* macros and add .data.percpu.first
section.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20 12:29:19 +09:00
Tejun Heo 145cd30bac linker script: add missing VMLINUX_SYMBOL
The newly added PERCPU_*() macros define and use __per_cpu_load but
VMLINUX_SYMBOL() was missing from usages causing build failures on
archs where linker visible symbol is different from C symbols
(e.g. blackfin).

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-17 15:26:12 +09:00
Tejun Heo 1a51e3a0ae x86: fold pda into percpu area on SMP
[ Based on original patch from Christoph Lameter and Mike Travis. ]

Currently pdas and percpu areas are allocated separately.  %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.

Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40.  To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.

After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda.  This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().

This patch also removes now unnecessary get_local_pda() and its call
sites.

A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:46 +01:00
Tejun Heo 3e5d8f9784 x86: make percpu symbols zerobased on SMP
[ Based on original patch from Christoph Lameter and Mike Travis. ]

This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S.  A new
PHDR is added as existing ones cannot contain sections near address
zero.  PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.

The following adjustments have been made to accomodate the address
change.

* code to locate percpu gdt_page in head_64.S is updated to add the
  load address to the gdt_page offset.

* __per_cpu_load is used in places where access to the init data area
  is necessary.

* pda->data_offset is initialized soon after C code is entered as zero
  value doesn't work anymore.

This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:14 +01:00
Frederic Weisbecker a0343e8231 tracing/function-graph-tracer: add a new .irqentry.text section
Impact: let the function-graph-tracer be aware of the irq entrypoints

Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.

Also, make this section recordable for dynamic tracing.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 11:14:07 +01:00
Steven Rostedt 2bcd521a68 trace: profile all if conditionals
Impact: feature to profile if statements

This patch adds a branch profiler for all if () statements.
The results will be found in:

  /debugfs/tracing/profile_branch

For example:

   miss      hit    %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
       0        1 100 x86_64_start_reservations      head64.c             127
       0        1 100 copy_bootdata                  head64.c             69
       1        0   0 x86_64_start_kernel            head64.c             111
      32        0   0 set_intr_gate                  desc.h               319
       1        0   0 reserve_ebda_region            head.c               51
       1        0   0 reserve_ebda_region            head.c               47
       0        1 100 reserve_ebda_region            head.c               42
       0        0   X maxcpus                        main.c               165

Miss means the branch was not taken. Hit means the branch was taken.
The percent is the percentage the branch was taken.

This adds a significant amount of overhead and should only be used
by those analyzing their system.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 11:41:01 +01:00
Steven Rostedt 45b797492a trace: consolidate unlikely and likely profiler
Impact: clean up to make one profiler of like and unlikely tracer

The likely and unlikely profiler prints out the file and line numbers
of the annotated branches that it is profiling. It shows the number
of times it was correct or incorrect in its guess. Having two
different files or sections for that matter to tell us if it was a
likely or unlikely is pretty pointless. We really only care if
it was correct or not.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 11:39:56 +01:00
Mathieu Desnoyers 7e066fb870 tracepoints: add DECLARE_TRACE() and DEFINE_TRACE()
Impact: API *CHANGE*. Must update all tracepoint users.

Add DEFINE_TRACE() to tracepoints to let them declare the tracepoint
structure in a single spot for all the kernel. It helps reducing memory
consumption, especially when declaring a lot of tracepoints, e.g. for
kmalloc tracing.

*API CHANGE WARNING*: now, DECLARE_TRACE() must be used in headers for
tracepoint declarations rather than DEFINE_TRACE(). This is the sane way
to do it. The name previously used was misleading.

Updates scheduler instrumentation to follow this API change.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 09:01:36 +01:00
Steven Rostedt 2ed84eeb88 trace: rename unlikely profiler to branch profiler
Impact: name change of unlikely tracer and profiler

Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 22:27:58 +01:00
Steven Rostedt 1f0d69a9fc tracing: profile likely and unlikely annotations
Impact: new unlikely/likely profiler

Andrew Morton recently suggested having an in-kernel way to profile
likely and unlikely macros. This patch achieves that goal.

When configured, every(*) likely and unlikely macro gets a counter attached
to it. When the condition is hit, the hit and misses of that condition
are recorded. These numbers can later be retrieved by:

  /debugfs/tracing/profile_likely    - All likely markers
  /debugfs/tracing/profile_unlikely  - All unlikely markers.

# cat /debug/tracing/profile_unlikely | head
 correct incorrect  %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
    2167        0   0 do_arch_prctl                  process_64.c         832
       0        0   0 do_arch_prctl                  process_64.c         804
    2670        0   0 IS_ERR                         err.h                34
   71230     5693   7 __switch_to                    process_64.c         673
   76919        0   0 __switch_to                    process_64.c         639
   43184    33743  43 __switch_to                    process_64.c         624
   12740    64181  83 __switch_to                    process_64.c         594
   12740    64174  83 __switch_to                    process_64.c         590

# cat /debug/tracing/profile_unlikely | \
  awk '{ if ($3 > 25) print $0; }' |head -20
   44963    35259  43 __switch_to                    process_64.c         624
   12762    67454  84 __switch_to                    process_64.c         594
   12762    67447  84 __switch_to                    process_64.c         590
    1478      595  28 syscall_get_error              syscall.h            51
       0     2821 100 syscall_trace_leave            ptrace.c             1567
       0        1 100 native_smp_prepare_cpus        smpboot.c            1237
   86338   265881  75 calc_delta_fair                sched_fair.c         408
  210410   108540  34 calc_delta_mine                sched.c              1267
       0    54550 100 sched_info_queued              sched_stats.h        222
   51899    66435  56 pick_next_task_fair            sched_fair.c         1422
       6       10  62 yield_task_fair                sched_fair.c         982
    7325     2692  26 rt_policy                      sched.c              144
       0     1270 100 pre_schedule_rt                sched_rt.c           1261
    1268    48073  97 pick_next_task_rt              sched_rt.c           884
       0    45181 100 sched_info_dequeued            sched_stats.h        177
       0       15 100 sched_move_task                sched.c              8700
       0       15 100 sched_move_task                sched.c              8690
   53167    33217  38 schedule                       sched.c              4457
       0    80208 100 sched_info_switch              sched_stats.h        270
   30585    49631  61 context_switch                 sched.c              2619

# cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }'
   39900    36577  47 pick_next_task                 sched.c              4397
   20824    15233  42 switch_mm                      mmu_context_64.h     18
       0        7 100 __cancel_work_timer            workqueue.c          560
     617    66484  99 clocksource_adjust             timekeeping.c        456
       0   346340 100 audit_syscall_exit             auditsc.c            1570
      38   347350  99 audit_get_context              auditsc.c            732
       0   345244 100 audit_syscall_entry            auditsc.c            1541
      38     1017  96 audit_free                     auditsc.c            1446
       0     1090 100 audit_alloc                    auditsc.c            862
    2618     1090  29 audit_alloc                    auditsc.c            858
       0        6 100 move_masked_irq                migration.c          9
       1      198  99 probe_sched_wakeup             trace_sched_switch.c 58
       2        2  50 probe_wakeup                   trace_sched_wakeup.c 227
       0        2 100 probe_wakeup_sched_switch      trace_sched_wakeup.c 144
    4514     2090  31 __grab_cache_page              filemap.c            2149
   12882   228786  94 mapping_unevictable            pagemap.h            50
       4       11  73 __flush_cpu_slab               slub.c               1466
  627757   330451  34 slab_free                      slub.c               1731
    2959    61245  95 dentry_lru_del_init            dcache.c             153
     946     1217  56 load_elf_binary                binfmt_elf.c         904
     102       82  44 disk_put_part                  genhd.h              206
       1        1  50 dst_gc_task                    dst.c                82
       0       19 100 tcp_mss_split_point            tcp_output.c         1126

As you can see by the above, there's a bit of work to do in rethinking
the use of some unlikelys and likelys. Note: the unlikely case had 71 hits
that were more than 25%.

Note:  After submitting my first version of this patch, Andrew Morton
  showed me a version written by Daniel Walker, where I picked up
  the following ideas from:

  1)  Using __builtin_constant_p to avoid profiling fixed values.
  2)  Using __FILE__ instead of instruction pointers.
  3)  Using the preprocessor to stop all profiling of likely
       annotations from vsyscall_64.c.

Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar
for their feed back on this patch.

(*) Not ever unlikely is recorded, those that are used by vsyscalls
 (a few of them) had to have profiling disabled.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 11:52:02 +01:00
Linus Torvalds 92b29b86fe Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-20 13:35:07 -07:00
Jason Baron 346e15beb5 driver core: basic infrastructure for per-module dynamic debug messages
Base infrastructure to enable per-module debug messages.

I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.

The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.

Future plans include extending this functionality to subsystems, that define 
their own debug levels and flags.

Usage:

Dynamic debugging is controlled by the debugfs file, 
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:

	<module_name> <enabled=0/1>
		.
		.
		.

	<module_name> : Name of the module in which the debug call resides
	<enabled=0/1> : whether the messages are enabled or not

For example:

	snd_hda_intel enabled=0
	fixup enabled=1
	driver enabled=0

Enable a module:

	$echo "set enabled=1 <module_name>" > dynamic_printk/modules

Disable a module:

	$echo "set enabled=0 <module_name>" > dynamic_printk/modules

Enable all modules:

	$echo "set enabled=1 all" > dynamic_printk/modules

Disable all modules:

	$echo "set enabled=0 all" > dynamic_printk/modules

Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.

[gkh: minor cleanups and tweaks to make the build work quietly]

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:47 -07:00
Steven Rostedt 8da3821ba5 ftrace: create __mcount_loc section
This patch creates a section in the kernel called "__mcount_loc".
This will hold a list of pointers to the mcount relocation for
each call site of mcount.

For example:

objdump -dr init/main.o
[...]
Disassembly of section .text:

0000000000000000 <do_one_initcall>:
   0:   55                      push   %rbp
[...]
000000000000017b <init_post>:
 17b:   55                      push   %rbp
 17c:   48 89 e5                mov    %rsp,%rbp
 17f:   53                      push   %rbx
 180:   48 83 ec 08             sub    $0x8,%rsp
 184:   e8 00 00 00 00          callq  189 <init_post+0xe>
                        185: R_X86_64_PC32      mcount+0xfffffffffffffffc
[...]

We will add a section to point to each function call.

   .section __mcount_loc,"a",@progbits
[...]
   .quad .text + 0x185
[...]

The offset to of the mcount call site in init_post is an offset from
the start of the section, and not the start of the function init_post.
The mcount relocation is at the call site 0x185 from the start of the
.text section.

  .text + 0x185  == init_post + 0xa

We need a way to add this __mcount_loc section in a way that we do not
lose the relocations after final link.  The .text section here will
be attached to all other .text sections after final link and the
offsets will be meaningless.  We need to keep track of where these
.text sections are.

To do this, we use the start of the first function in the section.
do_one_initcall.  We can make a tmp.s file with this function as a reference
to the start of the .text section.

   .section __mcount_loc,"a",@progbits
[...]
   .quad do_one_initcall + 0x185
[...]

Then we can compile the tmp.s into a tmp.o

  gcc -c tmp.s -o tmp.o

And link it into back into main.o.

  ld -r main.o tmp.o -o tmp_main.o
  mv tmp_main.o main.o

But we have a problem.  What happens if the first function in a section
is not exported, and is a static function. The linker will not let
the tmp.o use it.  This case exists in main.o as well.

Disassembly of section .init.text:

0000000000000000 <set_reset_devices>:
   0:   55                      push   %rbp
   1:   48 89 e5                mov    %rsp,%rbp
   4:   e8 00 00 00 00          callq  9 <set_reset_devices+0x9>
                        5: R_X86_64_PC32        mcount+0xfffffffffffffffc

The first function in .init.text is a static function.

00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices

The lowercase 't' means that set_reset_devices is local and is not exported.
If we simply try to link the tmp.o with the set_reset_devices we end
up with two symbols: one local and one global.

 .section __mcount_loc,"a",@progbits
 .quad set_reset_devices + 0x10

00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
                 U set_reset_devices

We still have an undefined reference to set_reset_devices, and if we try
to compile the kernel, we will end up with an undefined reference to
set_reset_devices, or even worst, it could be exported someplace else,
and then we will have a reference to the wrong location.

To handle this case, we make an intermediate step using objcopy.
We convert set_reset_devices into a global exported symbol before linking
it with tmp.o and set it back afterwards.

00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices

00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices

00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices

Now we have a section in main.o called __mcount_loc that we can place
somewhere in the kernel using vmlinux.ld.S and access it to convert
all these locations that call mcount into nops before starting SMP
and thus, eliminating the need to do this with kstop_machine.

Note, A well documented perl script (scripts/recordmcount.pl) is used
to do all this in one location.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:34:40 +02:00