Commit Graph

74 Commits

Author SHA1 Message Date
Dmitry Safonov 741f3a69f1 tracing: Remove redundant reset per-CPU buff in irqsoff tracer
There is no reason to do it twice: from commit b6f11df26f
("trace: Call tracing_reset_online_cpus before tracer->init()")
resetting of per-CPU buffers done before tracer->init() call.

tracer->init() calls {irqs,preempt,preemptirqs}off_tracer_init() and it
calls __irqsoff_tracer_init(), which resets per-CPU ringbuffer second
time.
It's slowpath, but anyway.

Link: http://lkml.kernel.org/r/1445278226-16187-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 16:39:11 -04:00
Steven Rostedt (Red Hat) cb86e05390 tracing: Have preempt(irqs)off trace preempt disabled functions
Joel Fernandes reported that the function tracing of preempt disabled
sections was not being reported when running either the preemptirqsoff or
preemptoff tracers. This was due to the fact that the function tracer
callback for those tracers checked if irqs were disabled before tracing. But
this fails when we want to trace preempt off locations as well.

Joel explained that he wanted to see funcitons where interrupts are enabled
but preemption was disabled. The expected output he wanted:

   <...>-2265    1d.h1 3419us : preempt_count_sub <-irq_exit
   <...>-2265    1d..1 3419us : __do_softirq <-irq_exit
   <...>-2265    1d..1 3419us : msecs_to_jiffies <-__do_softirq
   <...>-2265    1d..1 3420us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d..1 3420us : __local_bh_disable_ip <-__do_softirq
   <...>-2265    1..s1 3421us : run_timer_softirq <-__do_softirq
   <...>-2265    1..s1 3421us : hrtimer_run_pending <-run_timer_softirq
   <...>-2265    1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq
   <...>-2265    1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq
   <...>-2265    1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq
   <...>-2265    1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq
   <...>-2265    1..s1 3423us : rcu_bh_qs <-__do_softirq
   <...>-2265    1d.s1 3423us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d.s1 3423us : __local_bh_enable <-__do_softirq

There's a comment saying that the irq disabled check is because there's a
possible race that tracing_cpu may be set when the function is executed. But
I don't remember that race. For now, I added a check for preemption being
enabled too to not record the function, as there would be no race if that
was the case. I need to re-investigate this, as I'm now thinking that the
tracing_cpu will always be correct. But no harm in keeping the check for
now, except for the slight performance hit.

Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com

Fixes: 5e6d2b9cfa "tracing: Use one prologue for the preempt irqs off tracer function tracers"
Cc: stable@vget.kernel.org # 2.6.37+
Reported-by: Joel Fernandes <agnel.joel@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 12:47:38 -04:00
Yaowei Bai 79851821b2 tracing: report_latency() in trace_irqsoff.c can return boolean
This patch makes report_latency return bool due to this
particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-3-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:20:19 -05:00
Steven Rostedt (Red Hat) 983f938ae6 tracing: Move trace_flags from global to a trace_array field
In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.

There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-30 15:22:55 -04:00
Steven Rostedt (Red Hat) 8179e8a15b tracing: Do not create function tracer options when not compiled in
When the function tracer is not compiled in, do not create the option files
for it.

Fix up both the sched_wakeup and irqsoff tracers to handle the change.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 15:01:34 -04:00
Steven Rostedt (Red Hat) 729358da95 tracing: Only create function graph options when it is compiled in
Do not create fuction graph tracer options when function graph tracer is not
even compiled in.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 13:23:58 -04:00
Steven Rostedt (Red Hat) 03905582fd tracing: Move "display-graph" option to main options
In order to facilitate making all tracer options visible even when the
tracer is not active, we need to get rid of duplicate options. Any option
that is shared between multiple tracers really should be a main option.

As the wakeup and irqsoff tracers both use the "display-graph" option, and
use it exactly the same way, move that option from the tracer options to the
main options and consolidate them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 12:56:40 -04:00
Steven Rostedt (Red Hat) 3efb5f21a3 tracing: Remove unneeded includes of debugfs.h and fs.h
The creation of tracing files and directories is for the most part
encapsulated in helper functions in trace.c. Other files do not need to
include debugfs.h or fs.h, as they may have needed to in the past.

Remove them from the files that do not need them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-22 11:19:48 -05:00
Steven Rostedt (Red Hat) 02f2f7646f tracing: Allow irq/preempt tracers to be used by instances
The irqsoff, preemptoff and preemptirqsoff tracers can now be used by
instances. But they may only be used by one instance at a time (including
the top level directory). This allows multiple tracers to run while the
irqsoff (and friends) tracer is running simultaneously.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-21 13:59:29 -04:00
Steven Rostedt (Red Hat) 6d9b3fa5e7 tracing: Move tracing_max_latency into trace_array
In preparation for letting the latency tracers be used by instances,
remove the global tracing_max_latency variable and add a max_latency
field to the trace_array that the latency tracers will now use.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-21 13:59:26 -04:00
Steven Rostedt (Red Hat) 4104d326b6 ftrace: Remove global function list and call function directly
Instead of having a list of global functions that are called,
as only one global function is allow to be enabled at a time, there's
no reason to have a list.

Instead, simply have all the users of the global ops, use the global ops
directly, instead of registering their own ftrace_ops. Just switch what
function is used before enabling the function tracer.

This removes a lot of code as well as the complexity involved with it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-21 13:59:25 -04:00
Linus Torvalds 68114e5eb8 Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added.
 
 Uprobes now work with event triggers and multi buffers.
 Uprobes have support under ftrace and perf.
 
 The big feature is that the function tracer can now be used within the
 multi buffer instances. That is, you can now trace some functions
 in one buffer, others in another buffer, all functions in a third buffer
 and so on. They are basically agnostic from each other. This only
 works for the function tracer and not for the function graph trace,
 although you can have the function graph tracer running in the top level
 buffer (or any tracer for that matter) and have different function tracing
 going on in the sub buffers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
 +Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
 cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
 9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
 U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
 f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
 =HdXY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Most of the changes were largely clean ups, and some documentation.
  But there were a few features that were added:

  Uprobes now work with event triggers and multi buffers and have
  support under ftrace and perf.

  The big feature is that the function tracer can now be used within the
  multi buffer instances.  That is, you can now trace some functions in
  one buffer, others in another buffer, all functions in a third buffer
  and so on.  They are basically agnostic from each other.  This only
  works for the function tracer and not for the function graph trace,
  although you can have the function graph tracer running in the top
  level buffer (or any tracer for that matter) and have different
  function tracing going on in the sub buffers"

* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Add BUG_ON when stack end location is over written
  tracepoint: Remove unused API functions
  Revert "tracing: Move event storage for array from macro to standalone function"
  ftrace: Constify ftrace_text_reserved
  tracepoints: API doc update to tracepoint_probe_register() return value
  tracepoints: API doc update to data argument
  ftrace: Fix compilation warning about control_ops_free
  ftrace/x86: BUG when ftrace recovery fails
  ftrace: Warn on error when modifying ftrace function
  ftrace: Remove freelist from struct dyn_ftrace
  ftrace: Do not pass data to ftrace_dyn_arch_init
  ftrace: Pass retval through return in ftrace_dyn_arch_init()
  ftrace: Inline the code from ftrace_dyn_table_alloc()
  ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
  tracing: Evaluate len expression only once in __dynamic_array macro
  tracing: Correctly expand len expressions from __dynamic_array macro
  tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
  tracing: Fix event header migrate.h to include tracepoint.h
  tracing: Fix event header writeback.h to include tracepoint.h
  tracing: Warn if a tracepoint is not set via debugfs
  ...
2014-04-03 10:26:31 -07:00
Steven Rostedt (Red Hat) bf6065b5c7 tracing: Pass trace_array to flag_changed callback
As options (flags) may affect instances instead of being global
the flag_changed() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:13:08 -05:00
Steven Rostedt (Red Hat) 8c1a49aedb tracing: Pass trace_array to set_flag callback
As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:13:07 -05:00
Andi Kleen 285c00adf6 asmlinkage: Make trace_hardirqs_on/off_caller visible
These functions are called from assembler, and thus need to be
__visible.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391845930-28580-12-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-13 18:14:54 -08:00
Steven Rostedt (Red Hat) 10246fa35d tracing: Use flag buffer_disabled for irqsoff tracer
If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.

Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.

By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-01 20:34:28 -04:00
Steven Rostedt (Red Hat) 328df4759c tracing: Add function-trace option to disable function tracing of latency tracers
Currently, the only way to stop the latency tracers from doing function
tracing is to fully disable the function tracer from the proc file
system:

  echo 0 > /proc/sys/kernel/ftrace_enabled

This is a big hammer approach as it disables function tracing for
all users. This includes kprobes, perf, stack tracer, etc.

Instead, create a function-trace option that the latency tracers can
check to determine if it should enable function tracing or not.
This option can be set or cleared even while the tracer is active
and the tracers will disable or enable function tracing depending
on how the option was set.

Instead of using the proc file, disable latency function tracing with

  echo 0 > /debug/tracing/options/function-trace

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:36:08 -04:00
Steven Rostedt (Red Hat) 12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Steven Rostedt a7603ff4b5 tracing: Replace the static global per_cpu arrays with allocated per_cpu
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:43 -04:00
Steven Rostedt 2b6080f28c tracing: Encapsulate global_trace and remove dependencies on global vars
The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).

Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:42 -04:00
Steven Rostedt (Red Hat) 613f04a0f5 tracing: Prevent buffer overwrite disabled for latency tracers
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-14 23:40:21 -04:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Nadia Yvette Chambers 6d49e352ae propagate name change to comments in kernel source
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.

Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:39:54 +01:00
Hiraku Toyooka f43c738bfa tracing: Change tracer's integer flags to bool
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".

Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita

Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:25 -04:00
Steven Rostedt 6f4156723c tracing: Allow tracers to start at core initcall
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().

There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:24 -04:00
Steven Rostedt 4740974a68 ftrace: Add default recursion protection for function tracing
As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.

If the flag is set, then the function will be called directly with no
extra protection.

Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-31 10:29:52 -04:00
Steven Rostedt a1e2e31d17 ftrace: Return pt_regs to function trace callback
Return as the 4th paramater to the function tracer callback the pt_regs.

Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.

If an arch can pass full regs, then it should define:
 ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1

Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:18:49 -04:00
Steven Rostedt 2f5f6ad939 ftrace: Pass ftrace_ops as third parameter to function trace callback
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.

Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:17:35 -04:00
Ingo Molnar efc96737bd Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core 2011-11-11 08:19:37 +01:00
Jiri Olsa 7e9a49ef54 tracing/latency: Fix header output for latency tracers
In case the the graph tracer (CONFIG_FUNCTION_GRAPH_TRACER) or even the
function tracer (CONFIG_FUNCTION_TRACER) are not set, the latency tracers
do not display proper latency header.

The involved/fixed latency tracers are:
        wakeup_rt
        wakeup
        preemptirqsoff
        preemptoff
        irqsoff

The patch adds proper handling of tracer configuration options for latency
tracers, and displaying correct header info accordingly.

* The current output (for wakeup tracer) with both graph and function
  tracers disabled is:

  # tracer: wakeup
  #
    <idle>-0       0d.h5    1us+:      0:120:R   + [000]     7:  0:R watchdog/0
    <idle>-0       0d.h5    3us+: ttwu_do_activate.clone.1 <-try_to_wake_up
    ...

* The fixed output is:

  # tracer: wakeup
  #
  # wakeup latency trace v1.1.5 on 3.1.0-tip+
  # --------------------------------------------------------------------
  # latency: 55 us, #4/4, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
  #    -----------------
  #    | task: migration/0-6 (uid:0 nice:0 policy:1 rt_prio:99)
  #    -----------------
  #
  #                  _------=> CPU#
  #                 / _-----=> irqs-off
  #                | / _----=> need-resched
  #                || / _---=> hardirq/softirq
  #                ||| / _--=> preempt-depth
  #                |||| /     delay
  #  cmd     pid   ||||| time  |   caller
  #     \   /      |||||  \    |   /
       cat-1129    0d..4    1us :   1129:120:R   + [000]     6:  0:R migration/0
       cat-1129    0d..4    2us+: ttwu_do_activate.clone.1 <-try_to_wake_up

* The current output (for wakeup tracer) with only function
  tracer enabled is:

  # tracer: wakeup
  #
       cat-1140    0d..4    1us+:   1140:120:R   + [000]     6:  0:R migration/0
       cat-1140    0d..4    2us : ttwu_do_activate.clone.1 <-try_to_wake_up

* The fixed output is:
  # tracer: wakeup
  #
  # wakeup latency trace v1.1.5 on 3.1.0-tip+
  # --------------------------------------------------------------------
  # latency: 207 us, #109/109, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
  #    -----------------
  #    | task: watchdog/1-12 (uid:0 nice:0 policy:1 rt_prio:99)
  #    -----------------
  #
  #                  _------=> CPU#
  #                 / _-----=> irqs-off
  #                | / _----=> need-resched
  #                || / _---=> hardirq/softirq
  #                ||| / _--=> preempt-depth
  #                |||| /     delay
  #  cmd     pid   ||||| time  |   caller
  #     \   /      |||||  \    |   /
    <idle>-0       1d.h5    1us+:      0:120:R   + [001]    12:  0:R watchdog/1
    <idle>-0       1d.h5    3us : ttwu_do_activate.clone.1 <-try_to_wake_up

Link: http://lkml.kernel.org/r/20111107150849.GE1807@m.brq.redhat.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-07 13:48:35 -05:00
Linus Torvalds 7115e3fcf4 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
  perf symbols: Increase symbol KSYM_NAME_LEN size
  perf hists browser: Refuse 'a' hotkey on non symbolic views
  perf ui browser: Use libslang to read keys
  perf tools: Fix tracing info recording
  perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
  perf hists: Don't consider filtered entries when calculating column widths
  perf hists: Don't decay total_period for filtered entries
  perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
  perf hists browser: Do not exit on tab key with single event
  perf annotate browser: Don't change selection line when returning from callq
  perf tools: handle endianness of feature bitmap
  perf tools: Add prelink suggestion to dso update message
  perf script: Fix unknown feature comment
  perf hists browser: Apply the dso and thread filters when merging new batches
  perf hists: Move the dso and thread filters from hist_browser
  perf ui browser: Honour the xterm colors
  perf top tui: Give color hints just on the percentage, like on --stdio
  perf ui browser: Make the colors configurable and change the defaults
  perf tui: Remove unneeded call to newtCls on startup
  perf hists: Don't format the percentage on hist_entry__snprintf
  ...

Fix up conflicts in arch/x86/kernel/kprobes.c manually.

Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?).  But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..

Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge.  Make
sure that new use also uses the raw accessor functions.
2011-10-26 17:03:38 +02:00
Steven Rostedt e36de1de4a tracing: Fix preemptirqsoff tracer to not stop at preempt off
If irqs are disabled when preemption count reaches zero, the
preemptirqsoff tracer should not flag that as the end.

When interrupts are enabled and preemption count is not zero
the preemptirqsoff correctly continues its tracing.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-22 11:11:51 -04:00
Thomas Gleixner 5389f6fad2 locking, tracing: Annotate tracing locks as raw
The tracing locks can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.

In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-13 11:11:52 +02:00
Jiri Olsa 321e68b095 tracing, function_graph: Remove dependency of abstime and duration fields on latency
The display of absolute time and duration fields is based on the
latency field. This was added during the irqsoff/wakeup tracers
graph support changes.

It's causing confusion in what fields will be displayed for the
function_graph tracer itself. So I'm removing this depency, and
adding absolute time and duration fields to the preemptirqsoff
preemptoff irqsoff wakeup tracers.

With following commands:
	# echo function_graph > ./current_tracer
	# cat trace

This is what it looked like before:
# tracer: function_graph
#
#     TIME        CPU  DURATION                  FUNCTION CALLS
#      |          |     |   |                     |   |   |   |
 0)   0.068 us    |          } /* page_add_file_rmap */
 0)               |          _raw_spin_unlock() {
...

This is what it looks like now:
# tracer: function_graph
#
# CPU  DURATION                  FUNCTION CALLS
# |     |   |                     |   |   |   |
 0)   0.068 us    |                } /* add_preempt_count */
 0)   0.993 us    |              } /* vfsmount_lock_local_lock */
...

For preemptirqsoff preemptoff irqsoff wakeup tracers,
this is what it looked like before:
SNIP
#                       _-----=> irqs-off
#                      / _----=> need-resched
#                     | / _---=> hardirq/softirq
#                     || / _--=> preempt-depth
#                     ||| / _-=> lock-depth
#                     |||| /
# CPU  TASK/PID       |||||  DURATION                  FUNCTION CALLS
# |     |    |        |||||   |   |                     |   |   |   |
 1)    <idle>-0    |  d..1  0.000 us    |  acpi_idle_enter_simple();
...

This is what it looks like now:
SNIP
#
#                                       _-----=> irqs-off
#                                      / _----=> need-resched
#                                     | / _---=> hardirq/softirq
#                                     || / _--=> preempt-depth
#                                     ||| /
#     TIME        CPU  TASK/PID       ||||  DURATION                  FUNCTION CALLS
#      |          |     |    |        ||||   |   |                     |   |   |   |
   19.847735 |   1)    <idle>-0    |  d..1  0.000 us    |  acpi_idle_enter_simple();
...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-2-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:47 -04:00
Steven Rostedt b848914ce3 ftrace: Implement separate user function filtering
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Tejun Heo 2ce802f62b lockdep: Move early boot local IRQ enable/disable status to init/main.c
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-20 13:32:33 +01:00
Steven Rostedt 5e6d2b9cfa tracing: Use one prologue for the preempt irqs off tracer function tracers
The preempt and irqsoff tracers have three types of function tracers.
Normal function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending if interrupts are enabled or not).

This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.

Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:36 -04:00
Jiri Olsa 0a772620a2 tracing: Make graph related irqs/preemptsoff functions global
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:28 -04:00
KOSAKI Motohiro ef710e100c tracing: Shrink max latency ringbuffer if unnecessary
Documentation/trace/ftrace.txt says

  buffer_size_kb:

        This sets or displays the number of kilobytes each CPU
        buffer can hold. The tracer buffers are the same size
        for each CPU. The displayed number is the size of the
        CPU buffer and not total size of all buffers. The
        trace buffers are allocated in pages (blocks of memory
        that the kernel uses for allocation, usually 4 KB in size).
        If the last page allocated has room for more bytes
        than requested, the rest of the page will be used,
        making the actual allocation bigger than requested.
        ( Note, the size may not be a multiple of the page size
          due to buffer management overhead. )

        This can only be updated when the current_tracer
        is set to "nop".

But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.

Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.

That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.

Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.

This patch shrink buffer size of the max latency buffer if
unnecessary.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-21 10:20:17 -04:00
Jiri Olsa 62b915f106 tracing: Add graph output support for irqsoff tracer
Add function graph output to irqsoff tracer.

The graph output is enabled by setting new 'display-graph' trace option.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-27 12:36:53 -04:00
Steven Rostedt cc51a0fca6 tracing: Add stack trace to irqsoff tracer
The irqsoff and friends tracers help in finding causes of latency in the
kernel. The also work with the function tracer to show what was happening
when interrupts or preemption are disabled. But the function tracer has
a bit of an overhead and can cause exagerated readings.

Currently, when tracing with /proc/sys/kernel/ftrace_enabled = 0, where the
function tracer is disabled, the information that is provided can end up
being useless. For example, a 2 and a half millisecond latency only showed:

 # tracer: preemptirqsoff
 #
 # preemptirqsoff latency trace v1.1.5 on 2.6.32
 # --------------------------------------------------------------------
 # latency: 2463 us, #4/4, CPU#2 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
 #    -----------------
 #    | task: -4242 (uid:0 nice:0 policy:0 rt_prio:0)
 #    -----------------
 #  => started at: _spin_lock_irqsave
 #  => ended at:   remove_wait_queue
 #
 #
 #                  _------=> CPU#
 #                 / _-----=> irqs-off
 #                | / _----=> need-resched
 #                || / _---=> hardirq/softirq
 #                ||| / _--=> preempt-depth
 #                |||| /_--=> lock-depth
 #                |||||/     delay
 #  cmd     pid   |||||| time  |   caller
 #     \   /      ||||||   \   |   /
 hackbenc-4242    2d....    0us!: trace_hardirqs_off <-_spin_lock_irqsave
 hackbenc-4242    2...1. 2463us+: _spin_unlock_irqrestore <-remove_wait_queue
 hackbenc-4242    2...1. 2466us : trace_preempt_on <-remove_wait_queue

The above lets us know that hackbench with pid 2463 grabbed a spin lock
somewhere and enabled preemption at remove_wait_queue. This helps a little
but where this actually happened is not informative.

This patch adds the stack dump to the end of the irqsoff tracer. This provides
the following output:

 hackbenc-4242    2d....    0us!: trace_hardirqs_off <-_spin_lock_irqsave
 hackbenc-4242    2...1. 2463us+: _spin_unlock_irqrestore <-remove_wait_queue
 hackbenc-4242    2...1. 2466us : trace_preempt_on <-remove_wait_queue
 hackbenc-4242    2...1. 2467us : <stack trace>
  => sub_preempt_count
  => _spin_unlock_irqrestore
  => remove_wait_queue
  => free_poll_entry
  => poll_freewait
  => do_sys_poll
  => sys_poll
  => system_call_fastpath

Now we see that the culprit of this latency was the free_poll_entry code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-11 13:19:51 -05:00
Carsten Emde b5130b1e7d tracing: do not update tracing_max_latency when tracer is stopped
The state of the function pair tracing_stop()/tracing_start() is
correctly considered when tracer data are updated. However, the global
and externally accessible variable tracing_max_latency is always updated
- even when tracing is stopped.

The update should only occur, if tracing was not stopped.

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-12 21:45:17 -04:00
Carsten Emde 41dfba4367 tracing: remove unused local variables in tracer probe functions
When the nsecs_to_usecs() conversion in probe_wakeup_sched_switch() and
check_critical_timing() was moved to a later stage in order to avoid
unnecessary computing, it was overlooked to remove the original
variables, assignments and comments..

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-12 21:44:13 -04:00
Steven Rostedt 2f26ebd549 tracing: use timestamp to determine start of latency traces
Currently the latency tracers reset the ring buffer. Unfortunately
if a commit is in process (due to a trace event), this can corrupt
the ring buffer. When this happens, the ring buffer will detect
the corruption and then permanently disable the ring buffer.

The bug does not crash the system, but it does prevent further tracing
after the bug is hit.

Instead of reseting the trace buffers, the timestamp of the start of
the trace is used instead. The buffers will still contain the previous
data, but the output will not count any data that is before the
timestamp of the trace.

Note, this only affects the static trace output (trace) and not the
runtime trace output (trace_pipe). The runtime trace output does not
make sense for the latency tracers anyway.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 18:44:22 -04:00
Steven Rostedt e9d25fe6ea tracing: have latency tracers set the latency format
The latency tracers (irqsoff, preemptoff, preemptirqsoff, and wakeup)
are pretty useless with the default output format. This patch makes them
automatically enable the latency format when they are selected. They
also record the state of the latency option, and if it was not enabled
when selected, they disable it on reset.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 22:15:30 -05:00
Wenji Huang 73d8b8bc4f tracing: fix typing mistake in hint message and comments
Impact: cleanup

Fix incorrect hint message in code and typos in comments.

Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 12:38:24 -05:00
Arnaldo Carvalho de Melo 7be421510b trace: Remove unused trace_array_cpu parameter
Impact: cleanup

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 14:35:47 +01:00
Steven Rostedt 94523e818f trace: remove internal irqsoff disabling for trace output
Impact: cleanup of duplicate features

The trace output disables the ring buffer and prevents tracing to
occur. The code in irqsoff to do the same thing is no longer needed.
This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 11:10:36 +01:00
Steven Rostedt 745b1626dd trace: set max latency variable to zero on default
Impact: trace max latencies on start of latency tracing

This patch sets the max latency to zero whenever one of the
irq variant tracers or the wakeup tracer is set to current tracer.

Most developers expect to see output when starting up a latency
tracer. But since the max_latency is already set to max, and
it takes a latency greater than max_latency to be recorded, there
is no trace. This is not the expected behavior and has even confused
myself.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 12:18:09 +01:00