Commit Graph

34 Commits

Author SHA1 Message Date
Fuqian Huang 34de3513e6 i2c: ismt: Remove call to memset after dmam_alloc_coherent
In commit 518a2f1925 ("dma-mapping: zero memory returned from
dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So
memset is not needed.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-01 14:48:55 +02:00
Jarkko Nikula 5cda2d86de i2c: ismt: Add support for Intel Cedar Fork
Add PCI ID for the Intel Cedar Fork iSMT SMBus controller.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[wsa: kept sorting]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-03 20:02:32 +01:00
Radu Rendec 5cd5f0bb0d i2c: ismt: 16-byte align the DMA buffer address
Use only a portion of the data buffer for DMA transfers, which is always
16-byte aligned. This makes the DMA buffer address 16-byte aligned and
compensates for spurious hardware parity errors that may appear when the
DMA buffer address is not 16-byte aligned.

The data buffer is enlarged in order to accommodate any possible 16-byte
alignment offset and changes the DMA code to only use a portion of the
data buffer, which is 16-byte aligned.

The symptom of the hardware issue is the same as the one addressed in
v3.12-rc2-5-gbf41691 and manifests by transfers failing with EIO, with
bit 9 being set in the ERRSTS register.

Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15 21:02:43 +01:00
Radu Rendec aad550f93f i2c: ismt: dump registers at the end of transactions
This patch dumps general and master registers at the end of transactions
when debugging is enabled. Previously, registers were only dumped before
submitting new descriptors (at the beginning of transactions).

This helps debugging if some registers change as result of a failed
transaction (e.g. bits are set in the ERRSTS general register).

Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15 18:03:56 +01:00
Andy Shevchenko 017fc4f6f4 i2c: ismt: Use %pad specifier for dma_addr_t variables
...which takes care of proper format and size of the value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31 00:19:16 +01:00
Pontus Andersson c6ebcedbab i2c: ismt: Separate I2C block read from SMBus block read
Commit b6c159a9cb ("i2c: ismt: Don't duplicate the receive length for
block reads") broke I2C block reads. It aimed to fix normal SMBus block
read, but changed the correct behavior of I2C block read in the process.

According to Documentation/i2c/smbus-protocol, one vital difference
between normal SMBus block read and I2C block read is that there is no
byte count prefixed in the data sent on the wire:

 SMBus Block Read:  i2c_smbus_read_block_data()
 S Addr Wr [A] Comm [A]
            S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P

 I2C Block Read:  i2c_smbus_read_i2c_block_data()
 S Addr Wr [A] Comm [A]
            S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P

Therefore the two transaction types need to be processed differently in
the driver by copying of the dma_buffer as done previously for the
I2C_SMBUS_I2C_BLOCK_DATA case.

Fixes: b6c159a9cb ("i2c: ismt: Don't duplicate the receive length for block reads")
Signed-off-by: Pontus Andersson <epontan@gmail.com>
Tested-by: Stephen Douthit <stephend@adiengineering.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-13 20:31:03 +02:00
Stephen Douthit ba201c4f5e i2c: ismt: Return EMSGSIZE for block reads with bogus length
Compare the number of bytes actually seen on the wire to the byte
count field returned by the slave device.

Previously we just overwrote the byte count returned by the slave
with the real byte count and let the caller figure out if the
message was sane.

Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2017-08-29 22:13:50 +02:00
Stephen Douthit b6c159a9cb i2c: ismt: Don't duplicate the receive length for block reads
According to Table 15-14 of the C2000 EDS (Intel doc #510524) the
rx data pointed to by the descriptor dptr contains the byte count.

desc->rxbytes reports all bytes read on the wire, including the
"byte count" byte.  So if a device sends 4 bytes in response to a
block read, on the wire and in the DMA buffer we see:

count data1 data2 data3 data4
 0x04  0xde  0xad  0xbe  0xef

That's what we want to return in data->block to the next level.

Instead we were actually prefixing that with desc->rxbytes:

bad
count count data1 data2 data3 data4
 0x05  0x04  0xde  0xad  0xbe  0xef

This was discovered while developing a BMC solution relying on the
ipmi_ssif.c driver which was trying to interpret the bogus length
field as part of the IPMI response.

Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2017-08-29 22:12:30 +02:00
Liwei Song 17e83549e1 i2c: ismt: fix wrong device address when unmap the data buffer
Fix the following kernel bug:

kernel BUG at drivers/iommu/intel-iommu.c:3260!
invalid opcode: 0000 [#5] PREEMPT SMP
Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016
task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000
RIP: 0010:[<ffffffff8150a83b>]  [<ffffffff8150a83b>] intel_unmap+0x25b/0x260
RSP: 0018:ffff880176bef5e8  EFLAGS: 00010296
RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04
RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009
RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004
R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868
R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001
FS:  00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0
Stack:
 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030
 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010
 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e
Call Trace:
 [<ffffffff8199867f>] ? printk+0x46/0x48
 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10
 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt]
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0
 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0
 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530
 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev]
 [<ffffffff810aa829>] ? vprintk_default+0x29/0x40
 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev]
 [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0
 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190
 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20
 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0
 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e

This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter.

After finished I2C block read/write, when unmap the data buffer,
a wrong device address was pass to dma_unmap_single().

To fix this, give dma_unmap_single() the "dev" parameter, just like
what dma_map_single() does, then unmap can find the right devices.

Fixes: 13f35ac14c ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-15 16:07:03 +02:00
Wolfram Sang ea734404f3 i2c: don't print error when adding adapter fails
The core will do this for us now.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-22 08:19:55 +02:00
Mika Westerberg abaa7b0c12 i2c: ismt: Add Intel DNV PCI ID
Intel DNV has the same iSMT SMBus host controller than Intel Avoton. Add
DNV PCI ID to the list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12 23:44:16 +02:00
Linus Torvalds d55fc37856 Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...
2015-11-10 11:58:25 -08:00
Dustin Byford 8eb5c87a92 i2c: add ACPI support for I2C mux ports
Although I2C mux devices are easily enumerated using ACPI (_HID/_CID or
device property compatible string match), enumerating I2C client devices
connected through an I2C mux needs a little extra work.

This change implements a method for describing an I2C device hierarchy that
includes mux devices by using an ACPI Device() for each mux channel along
with an _ADR to set the channel number for the device.  See
Documentation/acpi/i2c-muxes.txt for a simple example.

To make this work the ismt, i801, and designware pci/platform devs now
share an ACPI companion with their I2C adapter dev similar to how it's done
in OF.  This is done on the assumption that power management functions will
not be called directly on the I2C dev that is sharing the ACPI node.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-25 15:49:46 +01:00
Andy Shevchenko 064181b00e i2c: ismt: issue a warning when fail to request MSI
Issue the warning in all error paths when unable to register MSI or its
handler.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:42 +02:00
Andy Shevchenko 6befa6dd8d i2c: ismt: propagate actual error code
Propagate actual return code when requesting interrupt fails.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:41 +02:00
Andy Shevchenko f92d155d3e i2c: ismt: do not duplicate msi_enabled flag
struct pci_dev already has a flag to track if MSI is enabled or not. Use it
directly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:40 +02:00
Andy Shevchenko fb8918b2cf i2c: ismt: PCI core handles power state for us
There is no need to repeat the work that is already done in the PCI driver
core. Remove suspend and resume callbacks.

Note that there is no more calls performed to enable or disable a PCI
device during suspend-resume cycle. Nowadays they seems to be
superfluous. Someone can read more in [1].

[1] https://www.kernel.org/doc/ols/2009/ols2009-pages-319-330.pdf

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:39 +02:00
Andy Shevchenko 600ca08023 i2c: ismt: improve usage of devres API
pcim_release() will release any requested region. There is no need to duplicate
this effort in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:38 +02:00
Andy Shevchenko 6109dbd618 i2c: ismt: mark register space with __iomem
This fixes the code to suppress sparse warnings like:

drivers/i2c/busses/i2c-ismt.c:725:36: warning: incorrect type in argument 2 (different address spaces)
drivers/i2c/busses/i2c-ismt.c:725:36:    expected void volatile [noderef] <asn:2>*addr
drivers/i2c/busses/i2c-ismt.c:725:36:    got void *

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20 16:51:37 +02:00
Christoph Hellwig 2f8e2c8777 move io-64-nonatomic*.h out of asm-generic
These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15 00:21:07 +02:00
Nicholas Mc Guire 1abdd5d957 i2c: ismt: fix type of return var of wait_for_completion_timeout
return type of wait_for_completion_timeout is unsigned long not int. As
ret is in used for other calls a new appropriately typed variable timeout
is added to handle wait_for_completion_timeout

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-03-15 10:50:02 +01:00
Wolfram Sang ca1f8da9ac i2c: remove FSF address
We have a central copy of the GPL for that. Some addresses were already
outdated.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-11-07 18:35:33 +01:00
Fan Du 8b57cebedd i2c: ismt: Use minimum descriptor size
Software is allowed to allocate number of descriptor size from 2 to 256,
this i2c controller could process more descriptor, but for i2c core soft
ware layer, only one i2c transaction is allowed each time.

So here switch to minimum 2 descriptor when initialization.

Signed-off-by: Fan Du <fan.du@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-29 22:41:19 +02:00
Fan Du 979bbf7b7a i2c: ismt: use correct length when copy buffer
In block write mode, when encapsulating dma_buffer, first element is
'command', the rest is data buffer, so only copy actual data buffer
starting from block[1] with the size indicating by block[0].

Signed-off-by: Fan Du <fan.du@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2014-09-20 14:56:19 +02:00
Jingoo Han 392debf116 i2c: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-13 09:44:59 +01:00
Paul Gortmaker 21d0b7c0fa i2c: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-01-24 18:24:31 +01:00
robert.valiquette@intel.com 001cebf03f i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type
This patch adds the support of the I2C_SMBUS_I2C_BLOCK_DATA transaction
type for the iSMT SMBus Controller.

Signed-off-by: Robert Valiquette <robert.valiquette@intel.com>
Acked-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-01-13 17:45:33 +01:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
James Ralston bf4169100c i2c: ismt: initialize DMA buffer
This patch adds code to initialize the DMA buffer to compensate for
possible hardware data corruption.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
[wsa: changed to use 'sizeof']
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-28 16:32:12 +02:00
Wolfram Sang 370257b287 i2c: ismt: add error return code in probe()
Return error code in the error case, and not success.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28 10:28:08 +02:00
Wolfram Sang 1fdc66aefd i2c: ismt: remove duplicate const
(SMATCH) drivers/i2c/busses/i2c-ismt.c:186:14: warning: duplicate const

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-24 10:30:56 +01:00
Seth Heasley 488b926923 i2c: iSMT: add Intel Avoton DeviceIDs
This patch adds the iSMT SMBus Controller DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-22 11:16:15 +01:00
Randy Dunlap 724d5edac7 i2c: fix i2c-ismt.c printk format warning
Fix printk format warning.  dma_addr_t can be 32-bit or 64-bit,
so cast it to long long for printing.  This also matches the
printk format specifier that is already used.

drivers/i2c/busses/i2c-ismt.c:532:3: warning: format '%llX' expects argument of type 'long long unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-15 20:46:51 +01:00
Neil Horman 13f35ac14c i2c: Adding support for Intel iSMT SMBus 2.0 host controller
The iSMT (Intel SMBus Message Transport) supports multi-master I2C/SMBus,
as well as IPMI.  It's operation is DMA-based and utilizes descriptors to
initiate transactions on the bus.

The iSMT hardware can act as both a master and a target, although this
driver only supports being a master.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Bill Brown <bill.e.brown@intel.com>
Tested-by: Seth Heasley <seth.heasley@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10 19:55:25 +01:00