Commit Graph

88 Commits

Author SHA1 Message Date
Sebastian Reichel 9c99e5e519 HSI: omap_ssi: drop pm_runtime_irq_safe
pm_runtime_irq_safe increases the parents runtime usage
counter effectively keeping the OMAP SoC from idling.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:08 +02:00
Sebastian Reichel ad60db2f9f HSI: omap_ssi_port: use rpm autosuspend API
Instead of immediately sending the SSI module to
sleep, wait some time in case of new incoming or
outgoing traffic.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:03 +02:00
Sebastian Reichel 4e552310cd HSI: omap_ssi: call msg->complete() from process context
msg->complete() should always be called from process context once
irq_safe runtime pm flag is no longer set for omap-ssi.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:00 +02:00
Sebastian Reichel 604fdfa458 HSI: omap_ssi_port: ensure clocks are kept enabled during transfer
ensure, that clocks remain enabled, when a transfer is started.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:56 +02:00
Sebastian Reichel d2b8d695c6 HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant
There is no need to wait for hardware to really reach idle states,
so just release runtime PM asynchronously.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:43 +02:00
Sebastian Reichel fa1572d956 HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock
runtime_pm_*_sync can block when irq_safe flag is removed
from omap-ssi driver, so it may not be called while a
spinlock is held.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:39 +02:00
Sebastian Reichel 62aa292b3e HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio
These functions may be called from atomic context,
so avoid synchronous runtime pm calls.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:36 +02:00
Sebastian Reichel c4a6257315 HSI: omap_ssi_port: switch to threaded pio irq
Move pio interrupt handler from tasklet into thread to
allow runtime_pm_get_sync calls without irq_safe being
set.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:32 +02:00
Sebastian Reichel 927d3f8f73 HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet
We may not call pm_runtime_get_sync() from tasklet, since
it can block once pm_runtime_irq_safe is removed for omap-ssi.

Since irq can should only be created for a running device,
we assume, that the device is already running and use non-
synchronous API instead.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:26 +02:00
Sebastian Reichel ea88f717cd HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync
There is no need to disable the device synchronously, so
don't do it.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:21 +02:00
Sebastian Reichel 7c5d81620e HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls
ssi_start_tx and ssi_stop_tx may be called from atomic context. Once
pm_runtime_irq_safe() is removed for omap-ssi, this will fail, due
to blocking pm_runtime_*_sync() calls.

This fixes ssi_stop_tx by using non-sync API and ssi_start_tx by
using a worker thread.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:15 +02:00
Sebastian Reichel de5a3774dd HSI: core: switch port event notifier from atomic to blocking
port events should be sent from process context after
irq_safe runtime pm flag is removed in omap-ssi.

Signed-off-By: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:53 +02:00
Sebastian Reichel 2083057aac HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations
This simplifies the code and avoids holding a spin_lock when
runtime pm calls are made. Once the irq_safe flag is removed
for omap_ssi's runtime pm, pm_runtime_get/put_sync can sleep,
which is a no-go while holding a spin_lock.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:47 +02:00
Sebastian Reichel cb70e4c1bc HSI: omap_ssi: convert cawake irq handler to thread
Convert cawake interrupt handler from tasklet to
threaded interrupt handler in preparation of
blocking runtime_pm calls.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:43 +02:00
Sebastian Reichel df26d639e2 HSI: ssi_protocol: fix ssip_xmit invocation
ssip_xmit should be called from process context,
since it calls hsi_async_write.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:37 +02:00
Sebastian Reichel 866dcb9d57 HSI: ssi_protocol: replace spin_lock with spin_lock_bh
To avoid setting irq_safe runtime pm flag in omap-ssi, multiple calls
will be moved to process context. This also affects ssi-protocol, so
use the safer spin_lock_bh instead of a simple spin_lock.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:32 +02:00
Sebastian Reichel 6d6c30973b HSI: ssi_protocol: avoid ssi_waketest call with held spinlock
This avoids calling ssi_waketest(), while a spinlock is
being hold, since ssi_waketest may sleep once irq_safe
runtime pm is disabled.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:37:58 +02:00
Sebastian Reichel b6616be324 HSI: omap_ssi: do not reset module
module reset and power management rule setup
is already done by hwmod. Remove this cruft,
which predates hwmod.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:37:43 +02:00
Sebastian Reichel 8c009f1f5d HSI: omap_ssi_port: remove useless newline
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:37:20 +02:00
Andrew F. Davis e01957abd4 hsi: Build hsi_boardinfo.c into hsi core if enabled
If the HSI core is built as a module hsi_boardinfo may still
be built-in as its Kconfig type is bool, which can cause build
issues. Fix this by building this code into the HSI core when
enabled.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-15 16:02:50 +02:00
Iago Abal 3c13ab1d96 HSI: cmt_speech: Fix double spin_lock
Release &hi->lock before calling `cs_hsi_control_read_error' to avoid deadlock.

The bug was found using EBA (https://github.com/models-team/eba), which reported
the following:

    Double lock
    first at drivers/hsi/clients/cmt_speech.c:443
    second at drivers/hsi/clients/cmt_speech.c:447
    In cs_hsi_read_on_control_complete defined at drivers/hsi/clients/cmt_speech.c:438:
    (!) drivers/hsi/clients/cmt_speech.c:443: spin_lock(& hi->lock);
    (?) drivers/hsi/clients/cmt_speech.c:445: msg->status == 4 -> true
    (!) drivers/hsi/clients/cmt_speech.c:447: cs_hsi_control_read_error(hi, msg);
        (!) drivers/hsi/clients/cmt_speech.c:407: __cs_hsi_error_pre(hi, msg, "control read",
                       & hi->control_state);
            (!) drivers/hsi/clients/cmt_speech.c:382: spin_lock(& hi->lock);

Signed-off-by: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-10 00:08:10 +02:00
Muhammad Falak R Wani b32bd7e7d5 hsi: use kmemdup
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-29 20:38:02 +02:00
Muhammad Falak R Wani f6004b7bc6 HSI: cmt_speech: use vma_pages().
Replace explicit computation of vma page count by a call to
vma_pages()

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-29 20:37:45 +02:00
Arnd Bergmann c2f90a465d HSI: omap-ssi: move omap_ssi_port_update_fclk
After the clk change support, the ssi omap ssi core driver
now calls into the port driver to change fclk. This function
was previously inside of an #ifdef, because it was only used
when CONFIG_PM is enabled. Now it also gets used without
power management support:

drivers/hsi/built-in.o: In function `ssi_clk_event':
omap_ssi_port.c:(.text+0x1bf8): undefined reference to `omap_ssi_port_update_fclk'

This moves the function outside of the CONFIG_PM guard.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Arnd Bergmann ac8e3ff3a0 HSI: omap-ssi: include pinctrl header files
The driver now uses some pinctrl functions, but fails
to build if PINCTRL is disabled because the respective
header files are only included indirectly:

drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event':
drivers/hsi/controllers/omap_ssi_core.c:317:4: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration]
drivers/hsi/controllers/omap_ssi_core.c:339:4: error: implicit declaration of function 'pinctrl_pm_select_default_state' [-Werror=implicit-function-declaration]
drivers/hsi/controllers/omap_ssi_port.c: In function 'ssi_flush':
drivers/hsi/controllers/omap_ssi_port.c:520:2: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration]

This includes the headers from the files that call the functions,
which works even if pinctrl is turned off.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Arnd Bergmann 53c703501e HSI: omap-ssi: add COMMON_CLK dependency
Enabling the omap ssi driver without COMMON_CLK results in a build failure:

drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event':
drivers/hsi/controllers/omap_ssi_core.c:304:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)

This adds a Kconfig dependency to avoid the invalid configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Sebastian Reichel 4bcf741452 HSI: omap-ssi: add clk change support
This adds support for frequency changes of the SSI
functional clock, which may occur due to DVFS.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-By: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:25 +02:00
Sebastian Reichel 0fae198988 HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
Merge omap_ssi and omap_ssi_port into one module. This
fixes problems with module cycle dependencies introduced
by future patches.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:21 +02:00
Sebastian Reichel 2a57aba850 HSI: omap_ssi: fix removal of port platform device
This avoids removal of the HSI port device when
only the platform port device should be removed
and clears the POPULATED bit in the DT node, so
that a new platform device is created when the
driver is probed again.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:17 +02:00
Sebastian Reichel 0845e1f20a HSI: omap_ssi: make sure probe stays available
device can be unbind/rebind, so probe should
stay available.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:12 +02:00
Sebastian Reichel f704e1103e HSI: omap_ssi: fix module unloading
Removal of ssi controller debugfs directory must
happen after the clients have been removed from
it.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:01 +02:00
Sebastian Reichel 73e6ce09c0 HSI: omap_ssi_port: switch to gpiod API
Simplify driver by switching to new gpio descriptor based API.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:55:20 +02:00
Sebastian Reichel 87d99063be HSI: ssi-protocol: Use handshake logic from n950
When using the ssi-protocol driver with the Nokia N950, the
following error is thrown during modem powered up sequence.

[13852.274993]  port0: SSI error: 0x01
[13852.279205] ssi-protocol ssi-protocol: RX error detected
[13852.284820] ssi-protocol ssi-protocol: Main state: 1
[13852.290069] ssi-protocol ssi-protocol: Recv state: 0
[13852.295288] ssi-protocol ssi-protocol: Send state: 0
[13852.300537] ssi-protocol ssi-protocol: CMT Offline
[13852.305603] ssi-protocol ssi-protocol: Wake test 1
[13852.310638] ssi-protocol ssi-protocol: Data RX id: 0
[13852.315887] ssi-protocol ssi-protocol: Data TX id: 0
[13856.001464] ssi-protocol ssi-protocol: Watchdog trigerred
[13856.007293] ssi-protocol ssi-protocol: Main state: 1
[13856.012542] ssi-protocol ssi-protocol: Recv state: 0
[13856.017761] ssi-protocol ssi-protocol: Send state: 0
[13856.023010] ssi-protocol ssi-protocol: CMT Offline
[13856.028045] ssi-protocol ssi-protocol: Wake test 0
[13856.033111] ssi-protocol ssi-protocol: Data RX id: 0
[13856.038330] ssi-protocol ssi-protocol: Data TX id: 0

This patch fixes the issue by using the handshake setup from
the Nokia N950 kernel. The new handshake sequence also works
with the N900, so there is no need to differentiate between
both modems.

Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-28 17:47:56 +01:00
Sebastian Reichel 633f67a51d HSI: nokia-modem: add n950 and n9 support
The Nokia N950 and Nokia N9 also have a SSI connected
modem, which use the same protocols as the Nokia N900,
but with increased link speed (96000 kbps instead of
55000 kbps) and with less GPIOs.

Since it's unclear, if the N950 and the N9 use exactly
the same modem, each of them gets their own compatible
string.

Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-28 17:46:08 +01:00
Andrzej Hajda 525e1abc6b HSI: omap_ssi_port: fix handling of_get_named_gpio result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-07 16:07:54 +01:00
Andrzej Hajda 6bf6ded300 HSI: omap_ssi: fix handling ida_simple_get result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-07 16:06:22 +01:00
Sanjeev Sharma 16bd5865cd hsi: controllers:remove redundant code
Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because this value is alreadytaken care by devm_ioremap_resource()

Signed-off-by: Sanjeev Sharma <sanjeev_sharma@mentor.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-30 16:10:40 +01:00
Insu Yun d2c85ac24e hsi: correctly handle return value of kzalloc
Since kzalloc can be failed in memory pressure,
its return value should be checked and handled.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-19 11:42:02 +02:00
Roger Quadros e74eba0493 hsi: omap_ssi_port: Prevent warning if cawake_gpio is not defined.
The error handling path is broken as cawake_gpio was defined as
unsigned integer causing the following warnings on boards that don't
use SSI port and so don't have cawake_gpio defined. e.g. beagleboard C4.

[   30.094635] WARNING: CPU: 0 PID: 322 at drivers/gpio/gpiolib.c:86 gpio_to_desc+0xa4/0xb8()
[   30.103363] invalid GPIO -2
[   30.106292] Modules linked in: omap_ssi_port(+) cpufreq_dt cfbfillrect cfbimgblt leds_gpio cfbcopyarea thermal_sys led_class hwmon gpio_keys encoder_tfp410 connector_analog_tv connector_dvi omap_hdq snd phy_i
[   30.145477] CPU: 0 PID: 322 Comm: modprobe Not tainted 4.3.0-rc4-00030-gca978c0-dirty #335
[   30.154174] Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[   30.160827] [<c0016ef4>] (unwind_backtrace) from [<c00131f4>] (show_stack+0x10/0x14)
[   30.168975] [<c00131f4>] (show_stack) from [<c033cf08>] (dump_stack+0x80/0x9c)
[   30.176635] [<c033cf08>] (dump_stack) from [<c003e920>] (warn_slowpath_common+0x7c/0xb8)
[   30.185180] [<c003e920>] (warn_slowpath_common) from [<c003e9f0>] (warn_slowpath_fmt+0x30/0x40)
[   30.194366] [<c003e9f0>] (warn_slowpath_fmt) from [<c0376314>] (gpio_to_desc+0xa4/0xb8)
[   30.202819] [<c0376314>] (gpio_to_desc) from [<c0376ac8>] (gpio_request_one+0x14/0x11c)
[   30.211273] [<c0376ac8>] (gpio_request_one) from [<c037370c>] (devm_gpio_request_one+0x3c/0x78)
[   30.220458] [<c037370c>] (devm_gpio_request_one) from [<bf184210>] (ssi_port_probe+0x118/0x504 [omap_ssi_port])
[   30.231170] [<bf184210>] (ssi_port_probe [omap_ssi_port]) from [<c03d4cfc>] (platform_drv_probe+0x48/0xa4)
[   30.241424] [<c03d4cfc>] (platform_drv_probe) from [<c03d3678>] (driver_probe_device+0x1dc/0x2a0)
[   30.250793] [<c03d3678>] (driver_probe_device) from [<c03d37d0>] (__driver_attach+0x94/0x98)
[   30.259643] [<c03d37d0>] (__driver_attach) from [<c03d1d60>] (bus_for_each_dev+0x54/0x88)
[   30.268249] [<c03d1d60>] (bus_for_each_dev) from [<c03d2d50>] (bus_add_driver+0xe8/0x1f8)
[   30.276916] [<c03d2d50>] (bus_add_driver) from [<c03d4118>] (driver_register+0x78/0xf4)
[   30.285369] [<c03d4118>] (driver_register) from [<c03d5380>] (__platform_driver_probe+0x34/0xd8)
[   30.294647] [<c03d5380>] (__platform_driver_probe) from [<c00097e4>] (do_one_initcall+0x80/0x1d8)
[   30.303985] [<c00097e4>] (do_one_initcall) from [<c011617c>] (do_init_module+0x5c/0x1cc)
[   30.312561] [<c011617c>] (do_init_module) from [<c00c7a68>] (load_module+0x18c8/0x1f0c)
[   30.320983] [<c00c7a68>] (load_module) from [<c00c8188>] (SyS_init_module+0xdc/0x150)
[   30.329223] [<c00c8188>] (SyS_init_module) from [<c000f7e0>] (ret_fast_syscall+0x0/0x1c)

Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-14 13:24:44 +02:00
Geliang Tang f098a04535 hsi: fix double kfree
When device_register() fails, kfree() is called in hsi_client_release(),
hence there is no need to call kfree in err3 again.

Fixes: a2aa24734d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-14 13:22:00 +02:00
Jakub Wilk c616ac28a5 HSI: Fix a typo
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-18 23:02:08 +02:00
Kirill A. Shutemov 7cbea8dc01 mm: mark most vm_operations_struct const
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 13:29:01 -07:00
Linus Torvalds 9d86b4128c Fix up implicit <module.h> users that will break later.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO2uAAoJEOvOhAQsB9HWOT0P/jvFrpj2iuWqdMcvBuMdlx6K
 /9qiMsOStbxmbmjj3RsbFCkeHJMUBCI0ZVrIosdEyeZWx33fHkZJisvN1i1PMA63
 qppcZtkGxSmCOi6+e9k+qZNBvKBWy2oCXyLx7zaUKkWuR7wGe9488+9dqd9x+/gu
 i/HTvf8Omrukwko2a0omWUSmUimhveb/hQ7Vxc/M9lbxFeO3jMabV5ZzgfnoTTrh
 Rd2zo4kGbhj8nxonCUHgamnk6hoTE3KYhBPvqohzTDSTALmZVxhCwaQzQWzq+kdl
 oSLa+tik508/csh98tN9dlMkJReHlDNdJIbfazQ1vHI00T5PsQELexFT02iKBhS7
 5mdHSPp5P1TgGB6Fk3lN+hVO6Ja0S/vmJUi72M2y5DPd55lnvOaCVuqzWIJTYOoN
 tqllBH4WIz27hsJWiMLgkJQaDxfBFYx104tOq56s5SeOthBluSE2xoNDrzZGyvRh
 NeVza4ccgxIj0p2xfgeErx89r4GSCNk/LakpcMJReaT7ri23mTCDZJNLMcVW7BYm
 2MW6M3LF748eN3P2YyNnU+TeQNpIho4whuwfOV+uR4tpdd5MtMaObWimwxBN7URM
 LeW3gIwsZFHxYU9NLeZoQZVi6gDmaVe7ma82AbHXaV/mQVYsSP9M6gCO+FASCTGt
 Rz6Nyl4/Ns8rdXUoOud8
 =qotW
 -----END PGP SIGNATURE-----

Merge tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull implicit module.h fixes from Paul Gortmaker:
 "Fix up implicit <module.h> users that will break later.

  The files changed here are simply modular source files that are
  implicitly relying on <module.h> being present.  We fix them up now,
  so that we can decouple some of the module related init code from the
  core init code in the future.

  The addition of the module.h include to several files here is also a
  no-op from a code generation point of view, else there would already
  be compile issues with these files today.

  There may be lots more implicit includes of <module.h> in tree, but
  these are the ones that extensive build test coverage has shown that
  must be fixed in order to avoid build breakage fallout for the pending
  module.h <---> init.h code relocation we desire to complete"

* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
  drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
  drivers/staging: include <module.h> for modular android tegra_ion code
  crypto/asymmetric_keys: pkcs7_key_type needs module.h
  sh: mach-highlander/psw.c is tristate and should use module.h
  drivers/regulator: include <module.h> for modular max77802 code
  drivers/pcmcia: include <module.h> for modular xxs1500_ss code
  drivers/hsi: include <module.h> for modular omap_ssi code
  drivers/gpu: include <module.h> for modular rockchip code
  drivers/gpio: include <module.h> for modular crystalcove code
  drivers/clk: include <module.h> for clk-max77xxx modular code
2015-07-02 10:25:22 -07:00
Uwe Kleine-König f451e76f89 HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction
Since 39b2bbe3d7 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-23 02:40:03 +02:00
Sebastian Reichel 505875e12a HSI: nokia-modem: Reduce missing driver message to debug level
Reduce message priority from dev_err to dev_dbg for missing cmt-speech
or ssi-protocol drivers, since they will be probed again and it may
result in spamming the boot log.

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-23 02:40:03 +02:00
Sebastian Reichel 5023a5ca8e HSI: cmt_speech: fix timestamp interface
The user interface for timestamps in the new cmt_speech
driver is broken in multiple ways:

- The layout is incompatible between 32-bit and 64-bit user
  space, because of the size differences in 'struct timespec'.
  This means that the driver can not work when used with 32-bit
  user space on a 64-bit kernel.

- As there are plans to change 32-bit user space to use
  a 64-bit time_t type in the future, it will also be
  incompatible with new 32-bit user space.

- It is using ktime_get_ts under it's deprecated alias
  (do_posix_clock_monotonic_gettime).

To keep support for the user space tools written for this driver (which
have lived many years out-of-tree), the interface has been hardened to
unsigned 32-bit values.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-23 02:40:03 +02:00
Paul Gortmaker a1a0bec593 drivers/hsi: include <module.h> for modular omap_ssi code
These files are built off of a tristate Kconfig option and also contain
modular function calls so they should explicitly include module.h to
avoid compile breakage during header shuffles done in the future.

We change the one header file wich gives us coverage on both files:
   drivers/hsi/controllers/omap_ssi.c
   drivers/hsi/controllers/omap_ssi_port.c

Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:25 -04:00
Julia Lawall 265ef3ee95 HSI: cmt_speech: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-04-05 14:45:27 +02:00
Sebastian Reichel f9c0d76eb4 HSI: nokia-modem: Add cmt-speech support
Register cmt-speech driver in nokia-modem driver and forward
hsi channel information.

Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-31 22:19:43 +02:00
Kai Vehmanen 7f62fe8a58 HSI: cmt_speech: Add cmt-speech driver
Introduces the cmt-speech driver, which implements
a character device interface for transferring speech
data frames over HSI/SSI.

The driver is used to exchange voice/speech data between
the Nokia N900/N950/N9's modem and its cpu.

Signed-off-by: Kai Vehmanen <kai.vehmanen@nokia.com>
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Signed-off-by: Joni Lapilainen <joni.lapilainen@gmail.com>

Since the original driver has been written for 2.6.28 some
build fixes and general cleanups have been added by me:

 * fix build for 4.0 kernel
 * replace GFP_ATOMIC with GFP_KERNEL in cs_alloc_cmds()
 * add sanity check for CS_SET_WAKELINE ioctl
 * cleanup driver initialisation
 * rename driver to cmt-speech to be consistent with
   ssi-protocol driver
 * move cs-protocol.h to include/uapi/linux/hsi, since
   it describes a userspace API
 * replace hardcoded channels numbers with values provided
   via the HSI framework (e.g. coming from DT)

Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-31 22:14:04 +02:00