Commit Graph

6469 Commits

Author SHA1 Message Date
Linus Torvalds b08fc5277a - Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
 - Explicitly reported overflow fixes (Silvio, Kees)
 - Add missing kvcalloc() function (Kees)
 - Treewide conversions of allocators to use either 2-factor argument
   variant when available, or array_size() and array3_size() as needed (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
 oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
 bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
 oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
 EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
 fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
 zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
 ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
 tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
 BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
 LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
 AtfvEeaPHaOyD8/h2Q==
 =zUUp
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more overflow updates from Kees Cook:
 "The rest of the overflow changes for v4.18-rc1.

  This includes the explicit overflow fixes from Silvio, further
  struct_size() conversions from Matthew, and a bug fix from Dan.

  But the bulk of it is the treewide conversions to use either the
  2-factor argument allocators (e.g. kmalloc(a * b, ...) into
  kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
  b) into vmalloc(array_size(a, b)).

  Coccinelle was fighting me on several fronts, so I've done a bunch of
  manual whitespace updates in the patches as well.

  Summary:

   - Error path bug fix for overflow tests (Dan)

   - Additional struct_size() conversions (Matthew, Kees)

   - Explicitly reported overflow fixes (Silvio, Kees)

   - Add missing kvcalloc() function (Kees)

   - Treewide conversions of allocators to use either 2-factor argument
     variant when available, or array_size() and array3_size() as needed
     (Kees)"

* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
  treewide: Use array_size in f2fs_kvzalloc()
  treewide: Use array_size() in f2fs_kzalloc()
  treewide: Use array_size() in f2fs_kmalloc()
  treewide: Use array_size() in sock_kmalloc()
  treewide: Use array_size() in kvzalloc_node()
  treewide: Use array_size() in vzalloc_node()
  treewide: Use array_size() in vzalloc()
  treewide: Use array_size() in vmalloc()
  treewide: devm_kzalloc() -> devm_kcalloc()
  treewide: devm_kmalloc() -> devm_kmalloc_array()
  treewide: kvzalloc() -> kvcalloc()
  treewide: kvmalloc() -> kvmalloc_array()
  treewide: kzalloc_node() -> kcalloc_node()
  treewide: kzalloc() -> kcalloc()
  treewide: kmalloc() -> kmalloc_array()
  mm: Introduce kvcalloc()
  video: uvesafb: Fix integer overflow in allocation
  UBIFS: Fix potential integer overflow in allocation
  leds: Use struct_size() in allocation
  Convert intel uncore to struct_size
  ...
2018-06-12 18:28:00 -07:00
Kees Cook a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Bjorn Helgaas ce4c7b2412 Merge branch 'pci/aer-squash'
- squash AER directory into drivers/pci/pcie/aer.c (Bjorn Helgaas)

* pci/aer-squash:
  PCI/AER: Use "PCI Express" consistently in Kconfig text
  PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/
  PCI/AER: Squash Kconfig.debug into Kconfig
  PCI/AER: Move private AER things to aerdrv.c
  PCI/AER: Move aer_irq() declaration to portdrv.h
  PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.h
  PCI/AER: Remove duplicate pcie_port_bus_type declaration
  PCI/AER: Squash ecrc.c into aerdrv.c
  PCI/AER: Squash aerdrv_acpi.c into aerdrv.c
  PCI/AER: Squash aerdrv_errprint.c into aerdrv.c
  PCI/AER: Squash aerdrv_core.c into aerdrv.c
  PCI/AER: Reorder code to group probe/remove stuff together
  PCI/AER: Remove forward declarations
2018-06-11 08:14:42 -05:00
Bjorn Helgaas 0b15f1e38f PCI/AER: Use "PCI Express" consistently in Kconfig text
Use "PCI Express" consistently in Kconfig text.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:47 -05:00
Bjorn Helgaas 4696b828ca PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/
Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ so they're next to
other PCIe service drivers.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:39 -05:00
Bjorn Helgaas adc1f22f5a PCI/AER: Squash Kconfig.debug into Kconfig
Squash Kconfig.debug into Kconfig.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:32 -05:00
Bjorn Helgaas 23e672bc2a PCI/AER: Move private AER things to aerdrv.c
Most of the things in aerdrv.h are only used in aerdrv.c, so move them
there.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:25 -05:00
Bjorn Helgaas f53e7418c3 PCI/AER: Move aer_irq() declaration to portdrv.h
The aer_irq() declaration is the only thing needed by aer_inject.c.  Move
it to portdrv.h so we eventually get rid of aerdrv.h completely.  No
functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:18 -05:00
Bjorn Helgaas 0544b04b79 PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.h
Move pcie_aer_get_firmware_first() to portdrv.h, where it can be more
easily shared between AER and DPC.  Then DPC no longer needs to include
aer/aerdrv.h.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:11 -05:00
Bjorn Helgaas 16c33b1595 PCI/AER: Remove duplicate pcie_port_bus_type declaration
pcie_port_bus_type is already declared in portdrv.h, so remove the
unnecessary duplicate declaration in aerdrv.h.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:11:05 -05:00
Bjorn Helgaas 41cbc9eb1a PCI/AER: Squash ecrc.c into aerdrv.c
Squash ecrc.c into aerdrv.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:10:59 -05:00
Bjorn Helgaas 256a459370 PCI/AER: Squash aerdrv_acpi.c into aerdrv.c
Squash aerdrv_acpi.c into aerdrv.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:10:53 -05:00
Bjorn Helgaas 0319c9a0ef PCI/AER: Squash aerdrv_errprint.c into aerdrv.c
Squash aerdrv_errprint.c into aerdrv.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:10:45 -05:00
Bjorn Helgaas fd3362cb73 PCI/AER: Squash aerdrv_core.c into aerdrv.c
Squash aerdrv_core.c into aerdrv.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:10:33 -05:00
Bjorn Helgaas 3c43a64cb3 PCI/AER: Reorder code to group probe/remove stuff together
Reorder code to group probe/remove stuff together.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11 08:10:27 -05:00
Bjorn Helgaas 0054ca8e10 PCI/AER: Remove forward declarations
Reorder code to remove forward declarations.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-08 08:31:42 -05:00
Shawn Lin 6e0832fa43 PCI: Collect all native drivers under drivers/pci/controller/
Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-08 07:50:11 -05:00
Linus Torvalds 3a3869f1c4 pci-v4.18-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R
 gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI
 p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH
 QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr
 grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+
 v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa
 46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl
 O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh
 OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE
 furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL
 KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R
 kpJ1VPTKK1XN64I=
 =aFAi
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - unify AER decoding for native and ACPI CPER sources (Alexandru
    Gagniuc)

  - add TLP header info to AER tracepoint (Thomas Tai)

  - add generic pcie_wait_for_link() interface (Oza Pawandeep)

  - handle AER ERR_FATAL by removing and re-enumerating devices, as
    Downstream Port Containment does (Oza Pawandeep)

  - factor out common code between AER and DPC recovery (Oza Pawandeep)

  - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)

  - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)

  - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

  - respect platform ownership of LTR (Bjorn Helgaas)

  - clear interrupt status in top half to avoid interrupt storm (Oza
    Pawandeep)

  - neaten pci=earlydump output (Andy Shevchenko)

  - avoid errors when extended config space inaccessible (Gilles Buloz)

  - prevent sysfs disable of device while driver attached (Christoph
    Hellwig)

  - use core interface to report PCIe link properties in bnx2x, bnxt_en,
    cxgb4, ixgbe (Bjorn Helgaas)

  - remove unused pcie_get_minimum_link() (Bjorn Helgaas)

  - fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn
    Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use
    ACPI hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

  - fix an SHPC quirk that mistakenly included *all* AMD bridges as well
    as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)

  - assign a bus number even to non-native hotplug bridges to leave
    space for acpiphp additions, to fix a common Thunderbolt xHCI
    hot-add failure (Mika Westerberg)

  - keep acpiphp from scanning native hotplug bridges, to fix common
    Thunderbolt hot-add failures (Mika Westerberg)

  - improve "partially hidden behind bridge" messages from core (Mika
    Westerberg)

  - add macros for PCIe Link Control 2 register (Frederick Lawler)

  - replace IB/hfi1 custom macros with PCI core versions (Frederick
    Lawler)

  - remove dead microblaze and xtensa code (Bjorn Helgaas)

  - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)

  - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
    Helgaas)

  - add managed interface to get PCI host bridge resources from OF (Jan
    Kiszka)

  - add support for unbinding generic PCI host controller (Jan Kiszka)

  - fix memory leaks when unbinding generic PCI host controller (Jan
    Kiszka)

  - request legacy VGA framebuffer only for VGA devices to avoid false
    device conflicts (Bjorn Helgaas)

  - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
    like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

  - add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

  - enable register clock for Armada 7K/8K (Gregory CLEMENT)

  - reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo
    Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

  - fix DesignWare enumeration below bridges (Koen Vandeputte)

  - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

  - update Layerscape maintainer email addresses (Minghuan Lian)

  - add COMPILE_TEST to improve build test coverage (Rob Herring)

  - fix Hyper-V bus registration failure caused by domain/serial number
    confusion (Sridhar Pitchai)

  - improve Hyper-V refcounting and coding style (Stephen Hemminger)

  - avoid potential Hyper-V hang waiting for a response that will never
    come (Dexuan Cui)

  - implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

  - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

  - add Mobiveil MSI support (Subrahmanya Lingappa)

  - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
    (Marek Vasut)

  - poll more frequently (5us vs 5ms) while waiting for R-Car data link
    active (Marek Vasut)

  - use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

  - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

  - add R-Car gen3 PHY support (Sergei Shtylyov)

  - improve R-Car PHYRDY polling (Sergei Shtylyov)

  - clean up R-Car macros (Marek Vasut)

  - use runtime PM for R-Car controller clock (Dien Pham)

  - update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint
    mode (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

  - support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

  - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
    selections (Bjorn Helgaas)

  - clean up quirks.c organization and whitespace (Bjorn Helgaas)

* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
  PCI/AER: Replace struct pcie_device with pci_dev
  PCI/AER: Remove unused parameters
  PCI: qcom: Include gpio/consumer.h
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: mobiveil: Add MSI support
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
  PCI/AER: Decode Error Source Requester ID
  PCI/AER: Remove aer_recover_work_func() forward declaration
  PCI/DPC: Use the generic pcie_do_fatal_recovery() path
  PCI/AER: Pass service type to pcie_do_fatal_recovery()
  PCI/DPC: Disable ERR_NONFATAL handling by DPC
  ...
2018-06-07 12:45:58 -07:00
Bjorn Helgaas 488ad6d367 Merge branch 'pci/trivial'
- clean up quirks.c organization and whitespace (Bjorn Helgaas)

* pci/trivial:
  PCI: Clean up whitespace in quirks.c
  PCI: Reorder quirks infrastructure code
2018-06-06 16:10:51 -05:00
Bjorn Helgaas 0ecda3a087 Merge branch 'pci/kconfig'
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
    selections (Bjorn Helgaas)

* pci/kconfig:
  PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS

# Conflicts:
#	drivers/pci/dwc/Kconfig
#	drivers/pci/host/Kconfig
2018-06-06 16:10:49 -05:00
Bjorn Helgaas 73144d77cb Merge branch 'lorenzo/pci/vmd'
- support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

* lorenzo/pci/vmd:
  PCI: vmd: Add an additional VMD device id to driver device id table
  x86/PCI: Add additional VMD device root ports to VMD AER quirk
  PCI: vmd: Add offset to bus numbers if necessary
  PCI: vmd: Assign membar addresses from shadow registers
  PCI: Add Intel VMD devices to pci ids
2018-06-06 16:10:45 -05:00
Bjorn Helgaas e52d38f4ab Merge branch 'lorenzo/pci/rockchip'
- update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint mode
    (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

* lorenzo/pci/rockchip:
  arm64: defconfig: update config for Rockchip PCIe
  dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe EP driver
  PCI: rockchip: Add EP driver for Rockchip PCIe controller
  dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to rockchip-pcie-host.txt
  PCI: rockchip: Split out common function to init controller
  PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT
  PCI: rockchip: Separate common code from RC driver

# Conflicts:
#	drivers/pci/host/pcie-rockchip.c
2018-06-06 16:10:43 -05:00
Bjorn Helgaas 1c2bef0a3f Merge branch 'lorenzo/pci/rcar'
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek
    Vasut)

  - poll more frequently (5us vs 5ms) while waiting for R-Car data link
    active (Marek Vasut)

  - use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

  - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

  - add R-Car gen3 PHY support (Sergei Shtylyov)

  - improve R-Car PHYRDY polling (Sergei Shtylyov)

  - clean up R-Car macros (Marek Vasut)

  - use runtime PM for R-Car controller clock (Dien Pham)

* lorenzo/pci/rcar:
  PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi() failpath
  PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails
  PCI: rcar: Add missing irq_dispose_mapping() into failpath
  PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources()
  PCI: rcar: Poll more often in rcar_pcie_wait_for_dl()
  PCI: rcar: Reuse generic pci_parse_request_of_pci_ranges() function
  DT: pci: rcar-pci: document R8A77980 bindings
  PCI: rcar: Factor out rcar_pcie_hw_init() call
  PCI: rcar: Add R-Car gen3 PHY support
  PCI: rcar: Remove PHYRDY polling from rcar_pcie_hw_init_h1()
  PCI: rcar: Poll PHYRDY in rcar_pcie_hw_init()
  PCI: rcar: Clean up the macros
  PCI: rcar: Use runtime PM to control controller clock

# Conflicts:
#	drivers/pci/host/pcie-rcar.c
2018-06-06 16:10:41 -05:00
Bjorn Helgaas 4c31ff0b3a Merge branch 'pci/host/qcom'
* pci/host/qcom:
  PCI: qcom: Include gpio/consumer.h
2018-06-06 16:10:40 -05:00
Bjorn Helgaas 93763ee651 Merge branch 'pci/host/mobiveil'
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

  - add Mobiveil MSI support (Subrahmanya Lingappa)

* pci/host/mobiveil:
  PCI: mobiveil: Add MSI support
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver DT bindings
2018-06-06 16:10:38 -05:00
Bjorn Helgaas cc64520f97 Merge branch 'lorenzo/pci/mediatek'
- implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

* lorenzo/pci/mediatek:
  PCI: mediatek: Implement chained IRQ handling setup
  PCI: mediatek: Set up vendor ID and class type for MT7622

# Conflicts:
#	drivers/pci/host/Kconfig
2018-06-06 16:10:37 -05:00
Bjorn Helgaas 741f8e7ecc Merge branch 'lorenzo/pci/hv'
- fix Hyper-V bus registration failure caused by domain/serial number
    confusion (Sridhar Pitchai)

  - improve Hyper-V refcounting and coding style (Stephen Hemminger)

  - avoid potential Hyper-V hang waiting for a response that will never
    come (Dexuan Cui)

* lorenzo/pci/hv:
  PCI: hv: Do not wait forever on a device that has disappeared
  PCI: hv: Use list_for_each_entry()
  PCI: hv: Convert remove_lock to refcount
  PCI: hv: Remove unused reason for refcount handler
  PCI: hv: Make sure the bus domain is really unique
2018-06-06 16:10:35 -05:00
Bjorn Helgaas 5db844eee5 Merge branch 'lorenzo/pci/host/misc'
- update Layerscape maintainer email addresses (Minghuan Lian)

  - add COMPILE_TEST to improve build test coverage (Rob Herring)

* lorenzo/pci/host/misc:
  MAINTAINERS: Update Layerscape PCIe driver maintainers list
  PCI: Improve host drivers compile test coverage

# Conflicts:
#	drivers/pci/dwc/Kconfig
2018-06-06 16:10:33 -05:00
Bjorn Helgaas bf79d7d099 Merge branch 'lorenzo/pci/endpoint'
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

* lorenzo/pci/endpoint:
  PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry
  misc: pci_endpoint_test: Use pci_irq_vector function
  PCI: endpoint: functions/pci-epf-test: Replace lower into upper case characters
  misc: pci_endpoint_test: Replace lower into upper case characters
  PCI: endpoint: Replace mdelay with usleep_range() in pci_epf_test_write()
2018-06-06 16:10:30 -05:00
Bjorn Helgaas f03c7aa459 Merge branch 'lorenzo/pci/dwc'
- reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

* lorenzo/pci/dwc:
  PCI: qcom: add runtime pm support to pcie_port
  PCI: qcom: Fix a bitwise vs logical NOT typo
  PCI: dwc: dra7xx: Use devm_ioremap_resource() instead of devm_ioremap()
  PCI: dwc: artpec6: Use devm_ioremap_resource() instead of devm_ioremap()
  misc: pci_endpoint_test: Add DesignWare EP entry
  dt-bindings: PCI: designware: Add support for EP in DesignWare driver
  PCI: dwc: Add support for EP mode
  dt-bindings: PCI: designware: Example update
  PCI: Move private DT related functions into private header
  PCI: dwc: Move CONFIG_PCI depends to menu
  PCI: dwc: Replace magic number by defines
  PCI: dwc: Small computation improvement
  PCI: dwc: Replace lower into upper case characters
  PCI: dwc: Define maximum number of vectors
  PCI: imx6: Remove space before tabs
  PCI: keystone: Do not treat link up message as error

# Conflicts:
#	include/linux/of_pci.h
2018-06-06 16:10:27 -05:00
Bjorn Helgaas bdc4bb1377 Merge branch 'lorenzo/pci/armada8k'
- enable register clock for Armada 7K/8K (Gregory CLEMENT)

* lorenzo/pci/armada8k:
  PCI: armada8k: Fix clock resource by adding a register clock
  PCI: armada8k: Remove useless test before clk_disable_unprepare()
2018-06-06 16:10:24 -05:00
Bjorn Helgaas fd83941d50 Merge branch 'pci/virtualization'
- add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

* pci/virtualization:
  PCI/IOV: Allow PF drivers to limit total_VFs to 0
  PCI: Add "pci=noats" boot parameter
  PCI: Add ACS quirk for Intel 300 series
  PCI: Add ACS quirk for Intel 7th & 8th Gen mobile
  nvme-pci: Use pci_sriov_configure_simple() to enable VFs
  net: ena: Use pci_sriov_configure_simple() to enable VFs
  PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs
  PCI/IOV: Add pci_sriov_configure_simple()
2018-06-06 16:10:21 -05:00
Bjorn Helgaas a7c9d4cf45 Merge branch 'pci/resource'
- add managed interface to get PCI host bridge resources from OF (Jan
    Kiszka)

  - add support for unbinding generic PCI host controller (Jan Kiszka)

  - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka)

* pci/resource:
  PCI: Enable PCI_DOMAINS along with generic PCI host controller
  PCI: Add support for unbinding the generic PCI host controller
  PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources()
  PCI: Use dev_printk() in of_pci_get_host_bridge_resources()
  PCI: Pass struct device to of_pci_get_host_bridge_resources()
  PCI: Rename of_pci_get_host_bridge_resources() device node parameter
  PCI: Fix devm_pci_alloc_host_bridge() memory leak
  PCI: Make pci_get_new_domain_nr() static
2018-06-06 16:10:18 -05:00
Bjorn Helgaas ae08aa13ba Merge branch 'pci/portdrv'
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas)

* pci/portdrv:
  PCI/portdrv: Remove unused pcie_port_acpi_setup()
2018-06-06 16:10:17 -05:00
Bjorn Helgaas f64c146410 Merge branch 'pci/hotplug'
- fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use ACPI
    hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

* pci/hotplug:
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: shpchp: Use dev_printk() for OSHP-related messages
  PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper
  PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags
  PCI: shpchp: Rely on previous _OSC results
  PCI: shpchp: Request SHPC control via _OSC when adding host bridge
  PCI: shpchp: Convert SHPC to be builtin only
  PCI: pciehp: Make pciehp_is_native() stricter
  PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug
  PCI: pciehp: Request control of native hotplug only if supported
  PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume
  PCI: pnv_php: Add missing of_node_put()
  PCI: pciehp: Add quirk for Command Completed errata
  PCI: Add Qualcomm vendor ID
  PCI: ibmphp: Fix use-before-set in get_max_bus_speed()

# Conflicts:
#	drivers/acpi/pci_root.c
2018-06-06 16:10:10 -05:00
Bjorn Helgaas 5e3165d1a8 Merge branch 'pci/enumeration'
- neaten pci=earlydump output (Andy Shevchenko)

  - avoid errors when extended config space inaccessible (Gilles Buloz)

  - prevent sysfs disable of device while driver attached (Christoph
    Hellwig)

  - use core interface to report PCIe link properties in bnx2x, bnxt_en,
    cxgb4, ixgbe (Bjorn Helgaas)

  - remove unused pcie_get_minimum_link() (Bjorn Helgaas)

* pci/enumeration:
  PCI: Remove unused pcie_get_minimum_link()
  ixgbe: Report PCIe link properties with pcie_print_link_status()
  cxgb4: Report PCIe link properties with pcie_print_link_status()
  bnxt_en: Report PCIe link properties with pcie_print_link_status()
  bnx2x: Report PCIe link properties with pcie_print_link_status()
  PCI: Prevent sysfs disable of device while driver is attached
  PCI: Check whether bridges allow access to extended config space
  x86/PCI: Make pci=earlydump output neat
2018-06-06 16:10:08 -05:00
Bjorn Helgaas 8e069da28d Merge branch 'pci/dpc'
- clear interrupt status in top half to avoid interrupt storm (Oza
    Pawandeep)

* pci/dpc:
  PCI/DPC: Clear interrupt status in interrupt handler top half
2018-06-06 16:10:06 -05:00
Bjorn Helgaas 08b5b2f783 Merge branch 'pci/aspm'
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

  - respect platform ownership of LTR (Bjorn Helgaas)

* pci/aspm:
  PCI/ACPI: Request LTR control from platform before using it
  PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR
2018-06-06 16:10:05 -05:00
Keith Busch e13d17f732 PCI/AER: Replace struct pcie_device with pci_dev
The AER driver only needed the pcie_device to get to the port pci_dev.
Save the pci_dev pointer directly in struct aer_rpc and remove the
unnecessary indirection.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-05 17:08:52 -05:00
Keith Busch 8f6fb67775 PCI/AER: Remove unused parameters
Remove unused "struct pcie_device *" parameters to handle_error_source()
and aer_process_err_devices().  No functional change intended.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-05 17:08:52 -05:00
Linus Torvalds 3c89adb0d1 Power management updates for 4.18-rc1
These include a significant update of the generic power domains (genpd)
 and Operating Performance Points (OPP) frameworks, mostly related to
 the introduction of power domain performance levels, cpufreq updates
 (new driver for Qualcomm Kryo processors, updates of the existing
 drivers, some core fixes, schedutil governor improvements), PCI power
 management fixes, ACPI workaround for EC-based wakeup events handling
 on resume from suspend-to-idle, and major updates of the turbostat
 and pm-graph utilities.
 
 Specifics:
 
  - Introduce power domain performance levels into the the generic
    power domains (genpd) and Operating Performance Points (OPP)
    frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
 
  - Fix two issues in the runtime PM framework related to the
    initialization and removal of devices using device links (Ulf
    Hansson).
 
  - Clean up the initialization of drivers for devices in PM domains
    (Ulf Hansson, Geert Uytterhoeven).
 
  - Fix a cpufreq core issue related to the policy sysfs interface
    causing CPU online to fail for CPUs sharing one cpufreq policy in
    some situations (Tao Wang).
 
  - Make it possible to use platform-specific suspend/resume hooks
    in the cpufreq-dt driver and make the Armada 37xx DVFS use that
    feature (Viresh Kumar, Miquel Raynal).
 
  - Optimize policy transition notifications in cpufreq (Viresh Kumar).
 
  - Improve the iowait boost mechanism in the schedutil cpufreq
    governor (Patrick Bellasi).
 
  - Improve the handling of deferred frequency updates in the
    schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
    Rafael Wysocki, Viresh Kumar).
 
  - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
 
  - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
    Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
    Viresh Kumar).
 
  - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
    set and update stale comments in the PCI core PM code (Rafael
    Wysocki).
 
  - Work around an issue related to the handling of EC-based wakeup
    events in the ACPI PM core during resume from suspend-to-idle if
    the EC has been put into the low-power mode (Rafael Wysocki).
 
  - Improve the handling of wakeup source objects in the PM core (Doug
    Berger, Mahendran Ganesh, Rafael Wysocki).
 
  - Update the driver core to prevent deferred probe from breaking
    suspend/resume ordering (Feng Kan).
 
  - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
    Wysocki).
 
  - Make the core suspend/resume code and cpufreq support the RT patch
    (Sebastian Andrzej Siewior, Thomas Gleixner).
 
  - Consolidate the PM QoS handling in cpuidle governors (Rafael
    Wysocki).
 
  - Fix a possible crash in the hibernation core (Tetsuo Handa).
 
  - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
    (David Wu).
 
  - Update the turbostat utility (fixes, cleanups, new CPU IDs, new
    command line options, built-in "Low Power Idle" counters support,
    new POLL and POLL% columns) and add an entry for it to MAINTAINERS
    (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
    Prarit Bhargava, Srinivas Pandruvada).
 
  - Update the pm-graph to version 5.1 (Todd Brandt).
 
  - Update the intel_pstate_tracer utility (Doug Smythies).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbFRzjAAoJEILEb/54YlRxREQQAKD7IjnLA86ZDkmwiwzFa9Cz
 OJ0qlKAcMZGjeWH6LYq7lqWtaJ5PcFkBwNB4sRyKFdGPQOX3Ph8ZzILm2j8hhma4
 Azn9632P6CoYHABa8Vof+A1BZ/j0aWtvtJEfqXhtF6rAYyWQlF0UmOIRsMs+54a+
 Z/w4WuLaX8qYq3JlR60TogNtTIbdUjkjfvxMGrE9OSQ8n4oEhqoF/v0WoTHYLpWw
 fu81M378axOu0Sgq1ZQ8GPUdblUqIO97iWwF7k2YUl7D9n5dm4wOhXDz3CLI8Cdb
 RkoFFdp8bJIthbc5desKY2XFU1ClY8lxEVMXewFzTGwWMw0OyWgQP0/ZiG+Mujq3
 CSbstg8GGpbwQoWU+VrluYa0FtqofV2UaGk1gOuPaojMqaIchRU4Nmbd2U6naNwp
 XN7A1DzrOVGEt0ny8ztKH2Oqmj+NOCcRsChlYzdhLQ1wlqG54iCGwAML2ZJF9/Nw
 0Sx8hm6eyWLzjSa0L384Msb+v5oqCoac66gPHCl2x7W+3F+jmqx1KbmkI2SRNUAL
 7CS9lcImpvC4uZB54Aqya104vfqHiDse7WP0GrKqOmNVucD7hYCPiq/pycLwez+b
 V3zLyvly8PsuBIa4AOQGGiK45HGpaKuB4TkRqRyFO0Fb5uL1M+Ld6kJiWlacl4az
 STEUjY/90SRQvX3ocGyB
 =wqBV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include a significant update of the generic power domains
  (genpd) and Operating Performance Points (OPP) frameworks, mostly
  related to the introduction of power domain performance levels,
  cpufreq updates (new driver for Qualcomm Kryo processors, updates of
  the existing drivers, some core fixes, schedutil governor
  improvements), PCI power management fixes, ACPI workaround for
  EC-based wakeup events handling on resume from suspend-to-idle, and
  major updates of the turbostat and pm-graph utilities.

  Specifics:

   - Introduce power domain performance levels into the the generic
     power domains (genpd) and Operating Performance Points (OPP)
     frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).

   - Fix two issues in the runtime PM framework related to the
     initialization and removal of devices using device links (Ulf
     Hansson).

   - Clean up the initialization of drivers for devices in PM domains
     (Ulf Hansson, Geert Uytterhoeven).

   - Fix a cpufreq core issue related to the policy sysfs interface
     causing CPU online to fail for CPUs sharing one cpufreq policy in
     some situations (Tao Wang).

   - Make it possible to use platform-specific suspend/resume hooks in
     the cpufreq-dt driver and make the Armada 37xx DVFS use that
     feature (Viresh Kumar, Miquel Raynal).

   - Optimize policy transition notifications in cpufreq (Viresh Kumar).

   - Improve the iowait boost mechanism in the schedutil cpufreq
     governor (Patrick Bellasi).

   - Improve the handling of deferred frequency updates in the schedutil
     cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
     Viresh Kumar).

   - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).

   - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
     Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
     Kumar).

   - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
     and update stale comments in the PCI core PM code (Rafael Wysocki).

   - Work around an issue related to the handling of EC-based wakeup
     events in the ACPI PM core during resume from suspend-to-idle if
     the EC has been put into the low-power mode (Rafael Wysocki).

   - Improve the handling of wakeup source objects in the PM core (Doug
     Berger, Mahendran Ganesh, Rafael Wysocki).

   - Update the driver core to prevent deferred probe from breaking
     suspend/resume ordering (Feng Kan).

   - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
     Wysocki).

   - Make the core suspend/resume code and cpufreq support the RT patch
     (Sebastian Andrzej Siewior, Thomas Gleixner).

   - Consolidate the PM QoS handling in cpuidle governors (Rafael
     Wysocki).

   - Fix a possible crash in the hibernation core (Tetsuo Handa).

   - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
     Wu).

   - Update the turbostat utility (fixes, cleanups, new CPU IDs, new
     command line options, built-in "Low Power Idle" counters support,
     new POLL and POLL% columns) and add an entry for it to MAINTAINERS
     (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
     Prarit Bhargava, Srinivas Pandruvada).

   - Update the pm-graph to version 5.1 (Todd Brandt).

   - Update the intel_pstate_tracer utility (Doug Smythies)"

* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
  tools/power turbostat: update version number
  tools/power turbostat: Add Node in output
  tools/power turbostat: add node information into turbostat calculations
  tools/power turbostat: remove num_ from cpu_topology struct
  tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
  tools/power turbostat: track thread ID in cpu_topology
  tools/power turbostat: Calculate additional node information for a package
  tools/power turbostat: Fix node and siblings lookup data
  tools/power turbostat: set max_num_cpus equal to the cpumask length
  tools/power turbostat: if --num_iterations, print for specific number of iterations
  tools/power turbostat: Add Cannon Lake support
  tools/power turbostat: delete duplicate #defines
  x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: add POLL and POLL% column
  tools/power turbostat: Fix --hide Pk%pc10
  tools/power turbostat: Build-in "Low Power Idle" counters support
  tools/power turbostat: Don't make man pages executable
  tools/power turbostat: remove blank lines
  tools/power turbostat: a small C-states dump readability immprovement
  ...
2018-06-05 09:38:39 -07:00
Linus Torvalds db020be9f7 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...
2018-06-04 19:59:22 -07:00
Linus Torvalds e5a594643a dma-mapping updates for 4.18:
- replaceme the force_dma flag with a dma_configure bus method.
    (Nipun Gupta, although one patch is іncorrectly attributed to me
     due to a git rebase bug)
  - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
  - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
    right thing for bounce buffering.
  - move dma-debug initialization to common code, and apply a few cleanups
    to the dma-debug code.
  - cleanup the Kconfig mess around swiotlb selection
  - swiotlb comment fixup (Yisheng Xie)
  - a trivial swiotlb fix. (Dan Carpenter)
  - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
  - add a new generic dma-noncoherent dma_map_ops implementation and use
    it for arc, c6x and nds32.
  - improve scatterlist validity checking in dma-debug. (Robin Murphy)
  - add a struct device quirk to limit the dma-mask to 32-bit due to
    bridge/system issues, and switch x86 to use it instead of a local
    hack for VIA bridges.
  - handle devices without a dma_mask more gracefully in the dma-direct
    code.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlsU1hwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPraxAAocC7JiFKW133/VugCtGA1x9uE8DPHealtsWTAeEq
 KOOB3GxWMU2hKqQ4km5tcfdWoGJvvab6hmDXcitzZGi2JajO7Ae0FwIy3yvxSIKm
 iH/ON7c4sJt8gKrXYsLVylmwDaimNs4a6xfODoCRgnWuovI2QrrZzupnlzPNsiOC
 lv8ezzcW+Ay/gvDD/r72psO+w3QELETif/OzR/qTOtvLrVabM06eHmPQ8Wb98smu
 /UPMMv6/3XwQnxpxpdyqN+p/gUdneXithzT261wTeZ+8gDXmcWBwHGcMBCimcoBi
 FklW52moazIPIsTysqoNlVFsLGJTeS4p2D3BLAp5NwWYsLv+zHUVZsI1JY/8u5Ox
 mM11LIfvu9JtUzaqD9SvxlxIeLhhYZZGnUoV3bQAkpHSQhN/xp2YXd5NWSo5ac2O
 dch83+laZkZgd6ryw6USpt/YTPM/UHBYy7IeGGHX/PbmAke0ZlvA6Rae7kA5DG59
 7GaLdwQyrHp8uGFgwze8P+R4POSk1ly73HHLBT/pFKnDD7niWCPAnBzuuEQGJs00
 0zuyWLQyzOj1l6HCAcMNyGnYSsMp8Fx0fvEmKR/EYs8O83eJKXi6L9aizMZx4v1J
 0wTolUWH6SIIdz474YmewhG5YOLY7mfe9E8aNr8zJFdwRZqwaALKoteRGUxa3f6e
 zUE=
 =6Acj
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - replace the force_dma flag with a dma_configure bus method. (Nipun
   Gupta, although one patch is іncorrectly attributed to me due to a
   git rebase bug)

 - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)

 - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
   right thing for bounce buffering.

 - move dma-debug initialization to common code, and apply a few
   cleanups to the dma-debug code.

 - cleanup the Kconfig mess around swiotlb selection

 - swiotlb comment fixup (Yisheng Xie)

 - a trivial swiotlb fix. (Dan Carpenter)

 - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)

 - add a new generic dma-noncoherent dma_map_ops implementation and use
   it for arc, c6x and nds32.

 - improve scatterlist validity checking in dma-debug. (Robin Murphy)

 - add a struct device quirk to limit the dma-mask to 32-bit due to
   bridge/system issues, and switch x86 to use it instead of a local
   hack for VIA bridges.

 - handle devices without a dma_mask more gracefully in the dma-direct
   code.

* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
  dma-direct: don't crash on device without dma_mask
  nds32: use generic dma_noncoherent_ops
  nds32: implement the unmap_sg DMA operation
  nds32: consolidate DMA cache maintainance routines
  x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
  x86/pci-dma: remove the explicit nodac and allowdac option
  x86/pci-dma: remove the experimental forcesac boot option
  Documentation/x86: remove a stray reference to pci-nommu.c
  core, dma-direct: add a flag 32-bit dma limits
  dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
  dma-debug: check scatterlist segments
  c6x: use generic dma_noncoherent_ops
  arc: use generic dma_noncoherent_ops
  arc: fix arc_dma_{map,unmap}_page
  arc: fix arc_dma_sync_sg_for_{cpu,device}
  arc: simplify arc_dma_sync_single_for_{cpu,device}
  dma-mapping: provide a generic dma-noncoherent implementation
  dma-mapping: simplify Kconfig dependencies
  riscv: add swiotlb support
  riscv: only enable ZONE_DMA32 for 64-bit
  ...
2018-06-04 10:58:12 -07:00
Arnd Bergmann a70aa7684b PCI: qcom: Include gpio/consumer.h
When CONFIG_GPIOLIB is disabled, we run into a build failure:

  drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_probe':
  drivers/pci/dwc/pcie-qcom.c:1223:16: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
    pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);

Including gpio/consumer.h directly is the correct fix.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-04 12:44:16 -05:00
Mika Westerberg e412d63d60 PCI: Improve "partially hidden behind bridge" log message
pci_scan_child_bus_extend() complains when we assign an unreachable
secondary bus number to a bridge.  For example, given the topology below:

  +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0
                                  +-01.0-[04-39]--
                                  \-02.0-[3a]----00.0

it logs the following messages:

  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]

These messages are incorrect (0000:02 is a bus, not a bridge) and
confusing.  Make the message more understandable:

  pci 0000:02:02.0: devices behind bridge are unusable because [bus 3a] cannot be assigned for them

Also, remove the reference to CardBus, because this issue affects all
varieties of PCI, not just CardBus.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-04 12:08:06 -05:00
Mika Westerberg 70f7880d2d PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
It is not immediately clear what the two functions actually return so
add kernel-doc comment explaining it a bit better.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-06-04 12:08:06 -05:00
Mika Westerberg 14fe5951b6 PCI: Move resource distribution for single bridge outside loop
If there is only a single bridge on the bus, we assign all resources to it.
Currently this is done as a part of the resource distribution loop but it
does not have to be there, and moving it outside actually improves
readability because we can then save one indent level in the loop.

While there we can add hotplug_bridges == 1 && normal_bridges == 0 to
the same block because they are dealt the same way.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-06-04 12:08:06 -05:00
Mika Westerberg 3374c545c2 PCI: Account for all bridges on bus when distributing bus numbers
When distributing extra bus number space to hotplug bridges for future
extension, we don't account for the fact that there might be non-hotplug
bridges on the bus after the hotplug bridges.  For example:

  01:00.0 --+- 02:00.0 (HotPlug-) -- Thunderbolt host controller
            +- 02:01.0 (HotPlug+)
            \- 02:02.0 (HotPlug-) -- xHCI host controller

pci_scan_child_bus_extend() is supposed to distribute the remaining bus
numbers to the hotplug bridge at 02:01.0, but only after accounting for all
bridges on bus 02.  Since we don't check whether there's another
non-hotplug bridge after the hotplug bridge 02:01.0, it may not leave space
for the non-hotplug bridge:

  pci 0000:00:1b.0: PCI bridge to [bus 01-39]  (Root Port)
  pci 0000:01:00.0: PCI bridge to [bus 02-39]
  ...
  pci 0000:02:00.0: PCI bridge to [bus 03]
  pci 0000:02:01.0: PCI bridge to [bus 04]
  pci_bus 0000:04: [bus 04-39] extended by 0x35
  pci_bus 0000:04: bus scan returning with max=39
  pci_bus 0000:04: busn_res: [bus 04-39] end is updated to 39
  pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
  pci_bus 0000:3a: scanning bus
  pci_bus 0000:3a: bus scan returning with max=3a
  pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]
  pci_bus 0000:02: bus scan returning with max=3a
  pci_bus 0000:02: busn_res: [bus 02-39] end can not be updated to 3a

The resulting 'lspci -t' output looks like this:

  +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0
                             ^^   +-01.0-[04-39]--
                                  \-02.0-[3a]----00.0
                                          ^^
The xHCI host controller behind 02:02.0 is not usable because it would have
to be assigned bus 3a, which is not accessible through 00:1b.0.

To fix this, reserve at least one bus for each bridge while scanning
already configured bridges.  Then use this information in the second
scan to correct the available extra bus space for hotplug bridges.

After this change the 'lspci -t' output is what is expected:

  +-1b.0-[01-39]----00.0-[02-39]--+-00.0-[03]----00.0
                                  +-01.0-[04-38]--
                                  \-02.0-[39]----00.0

The xHCI controller is now on bus 39, where it is usable.

Fixes: 1c02ea8100 ("PCI: Distribute available buses to hotplug-capable bridges")
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
2018-06-04 12:08:06 -05:00
Mika Westerberg 9337a49362 ACPI / hotplug / PCI: Drop unnecessary parentheses
Remove unnecessary parentheses.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-04 12:08:06 -05:00