Commit Graph

233 Commits

Author SHA1 Message Date
Cong Wang 9b04c5fec4 mm: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:27 +08:00
Al Viro 191c542442 mm: collapse security_vm_enough_memory() variants into a single function
Collapse security_vm_enough_memory() variants into a single function.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-14 10:45:39 +11:00
Johannes Weiner 72835c86ca mm: unify remaining mem_cont, mem, etc. variable names to memcg
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:06 -08:00
Mel Gorman f90ac3982a mm: avoid livelock on !__GFP_FS allocations
Colin Cross reported;

  Under the following conditions, __alloc_pages_slowpath can loop forever:
  gfp_mask & __GFP_WAIT is true
  gfp_mask & __GFP_FS is false
  reclaim and compaction make no progress
  order <= PAGE_ALLOC_COSTLY_ORDER

  These conditions happen very often during suspend and resume,
  when pm_restrict_gfp_mask() effectively converts all GFP_KERNEL
  allocations into __GFP_WAIT.

  The oom killer is not run because gfp_mask & __GFP_FS is false,
  but should_alloc_retry will always return true when order is less
  than PAGE_ALLOC_COSTLY_ORDER.

In his fix, he avoided retrying the allocation if reclaim made no progress
and __GFP_FS was not set.  The problem is that this would result in
GFP_NOIO allocations failing that previously succeeded which would be very
unfortunate.

The big difference between GFP_NOIO and suspend converting GFP_KERNEL to
behave like GFP_NOIO is that normally flushers will be cleaning pages and
kswapd reclaims pages allowing GFP_NOIO to succeed after a short delay.
The same does not necessarily apply during suspend as the storage device
may be suspended.

This patch special cases the suspend case to fail the page allocation if
reclaim cannot make progress and adds some documentation on how
gfp_allowed_mask is currently used.  Failing allocations like this may
cause suspend to abort but that is better than a livelock.

[mgorman@suse.de: Rework fix to be suspend specific]
[rientjes@google.com: Move suspended device check to should_alloc_retry]
Reported-by: Colin Cross <ccross@android.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:42 -08:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
David Rientjes 43362a4977 oom: fix race while temporarily setting current's oom_score_adj
test_set_oom_score_adj() was introduced in 72788c3856 ("oom: replace
PF_OOM_ORIGIN with toggling oom_score_adj") to temporarily elevate
current's oom_score_adj for ksm and swapoff without requiring an
additional per-process flag.

Using that function to both set oom_score_adj to OOM_SCORE_ADJ_MAX and
then reinstate the previous value is racy since it's possible that
userspace can set the value to something else itself before the old value
is reinstated.  That results in userspace setting current's oom_score_adj
to a different value and then the kernel immediately setting it back to
its previous value without notification.

To fix this, a new compare_swap_oom_score_adj() function is introduced
with the same semantics as the compare and swap CAS instruction, or
CMPXCHG on x86.  It is used to reinstate the previous value of
oom_score_adj if and only if the present value is the same as the old
value.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
Paul Gortmaker e25934a517 mm: delete various needless include <linux/module.h>
There is nothing modular in these files, and no reason to drag
in all the 357 headers that module.h brings with it, since
it just slows down compiles.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:11 -04:00
Hugh Dickins a2c16d6cb0 mm: let swap use exceptional entries
If swap entries are to be stored along with struct page pointers in a
radix tree, they need to be distinguished as exceptional entries.

Most of the handling of swap entries in radix tree will be contained in
shmem.c, but a few functions in filemap.c's common code need to check
for their appearance: find_get_page(), find_lock_page(),
find_get_pages() and find_get_pages_contig().

So as not to slow their fast paths, tuck those checks inside the
existing checks for unlikely radix_tree_deref_slot(); except for
find_lock_page(), where it is an added test.  And make it a BUG in
find_get_pages_tag(), which is not applied to tmpfs files.

A part of the reason for eliminating shmem_readpage() earlier, was to
minimize the places where common code would need to allow for swap
entries.

The swp_entry_t known to swapfile.c must be massaged into a slightly
different form when stored in the radix tree, just as it gets massaged
into a pte_t when stored in page tables.

In an i386 kernel this limits its information (type and page offset) to
30 bits: given 32 "types" of swapfile and 4kB pagesize, that's a maximum
swapfile size of 128GB.  Which is less than the 512GB we previously
allowed with X86_PAE (where the swap entry can occupy the entire upper
32 bits of a pte_t), but not a new limitation on 32-bit without PAE; and
there's not a new limitation on 64-bit (where swap filesize is already
limited to 16TB by a 32-bit page offset).  Thirty areas of 128GB is
probably still enough swap for a 64GB 32-bit machine.

Provide swp_to_radix_entry() and radix_to_swp_entry() conversions, and
enforce filesize limit in read_swap_header(), just as for ptes.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:22 -10:00
Kay Sievers f15146380d fs: seq_file - add event counter to simplify poll() support
Moving the event counter into the dynamically allocated 'struc seq_file'
allows poll() support without the need to allocate its own tracking
structure.

All current users are switched over to use the new counter.

Requested-by: Andrew Morton akpm@linux-foundation.org
Acked-by: NeilBrown <neilb@suse.de>
Tested-by: Lucas De Marchi lucas.demarchi@profusion.mobi
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:50 -04:00
Hugh Dickins 072441e21d mm: move shmem prototypes to shmem_fs.h
Before adding any more global entry points into shmem.c, gather such
prototypes into shmem_fs.h.  Remove mm's own declarations from swap.h,
but for now leave the ones in mm.h: because shmem_file_setup() and
shmem_zero_setup() are called from various places, and we should not
force other subsystems to update immediately.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:12 -07:00
David Rientjes 72788c3856 oom: replace PF_OOM_ORIGIN with toggling oom_score_adj
There's a kernel-wide shortage of per-process flags, so it's always
helpful to trim one when possible without incurring a significant penalty.
 It's even more important when you're planning on adding a per- process
flag yourself, which I plan to do shortly for transparent hugepages.

PF_OOM_ORIGIN is used by ksm and swapoff to prefer current since it has a
tendency to allocate large amounts of memory and should be preferred for
killing over other tasks.  We'd rather immediately kill the task making
the errant syscall rather than penalizing an innocent task.

This patch removes PF_OOM_ORIGIN since its behavior is equivalent to
setting the process's oom_score_adj to OOM_SCORE_ADJ_MAX.

The process's old oom_score_adj is stored and then set to
OOM_SCORE_ADJ_MAX during the time it used to have PF_OOM_ORIGIN.  The old
value is then reinstated when the process should no longer be considered a
high priority for oom killing.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:10 -07:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
KAMEZAWA Hiroyuki 56039efa18 memcg: fix ugly initialization of return value is in caller
Remove initialization of vaiable in caller of memory cgroup function.
Actually, it's return value of memcg function but it's initialized in
caller.

Some memory cgroup uses following style to bring the result of start
function to the end function for avoiding races.

   mem_cgroup_start_A(&(*ptr))
   /* Something very complicated can happen here. */
   mem_cgroup_end_A(*ptr)

In some calls, *ptr should be initialized to NULL be caller.  But it's
ugly.  This patch fixes that *ptr is initialized by _start function.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Cesar Eduardo Barros 2130781e2a sys_swapon: fix inode locking
A conflict between 52c50567d8 ("mm: swap: unlock swapfile inode mutex
before closing file on bad swapfiles") and 83ef99befc ("sys_swapon:
remove did_down variable") caused a double unlock of the inode mutex
(once in bad_swap: before the filp_close, once at the end just before
returning).

The patch which added the extra unlock cleared did_down to avoid
unlocking twice, but the other patch removed the did_down variable.

To fix, set inode to NULL after the first unlock, since it will be used
after that point only for the final unlock.

While checking this patch, I found a path which could unlock without
locking, in case the same inode was added as a swapfile twice. To fix,
move the setting of the inode variable further down, to just before
claim_swapfile, which will lock the inode before doing anything else.

Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 07:54:22 -07:00
Cesar Eduardo Barros 24b8ff7c27 mm: remove inline from scan_swap_map()
scan_swap_map() is a large function (224 lines), with several loops and a
complex control flow involving several gotos.

Given all that, it is a bit silly that it is marked as inline.  The
compiler agrees with me: on a x86-64 compile, it did not inline the
function.

Remove the "inline" and let the compiler decide instead.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:09 -07:00
Cesar Eduardo Barros 40531542e2 sys_swapon: separate final enabling of the swapfile
The block in sys_swapon which does the final adjustments to the
swap_info_struct and to swap_list is the same as the block which
re-inserts it again at sys_swapoff on failure of try_to_unuse(). Move
this code to a separate function, and use it both in sys_swapon and
sys_swapoff.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros c6a2b64ba5 sys_swapoff: change order to match sys_swapon
The block in sys_swapon which does the final adjustments to the
swap_info_struct and to swap_list is the same as the block which
re-inserts it again at sys_swapoff on failure of try_to_unuse(), except
for the order of the operations within the lock. Since the order should
not matter, arbitrarily change sys_swapoff to match sys_swapon, in
preparation to making both share the same code.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros c69dbfb84e sys_swapon: move printk outside lock
The block in sys_swapon which does the final adjustments to the
swap_info_struct and to swap_list is the same as the block which
re-inserts it again at sys_swapoff on failure of try_to_unuse(). To be
able to make both share the same code, move the printk() call in the
middle of it to just after it.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros 9c8100ef26 sys_swapon: remove nr_good_pages variable
It still exists within setup_swap_map_and_extents(), but after it
nr_good_pages == p->pages.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros bdb8e3f683 sys_swapon: simplify error flow in setup_swap_map_and_extents()
Since there is no cleanup to do, there is no reason to jump to a label.
Return directly instead.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros 915d4d7bc0 sys_swapon: separate parsing of bad blocks and extents
Move the code which parses the bad block list and the extents to a
separate function. Only code movement, no functional changes.

This change uses the fact that, after the success path, nr_good_pages ==
p->pages.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros 1421ef3cd1 sys_swapon: call swap_cgroup_swapon() earlier
The call to swap_cgroup_swapon is in the middle of loading the swap map
and extents. As it only does memory allocation and does not depend on
the swapfile layout (map/extents), it can be called earlier (or later).

Move it to just after the allocation of swap_map, since it is
conceptually similar (allocates a map).

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros 3871902538 sys_swapon: simplify error flow in read_swap_header()
Since there is no cleanup to do, there is no reason to jump to a label.
Return directly instead.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:08 -07:00
Cesar Eduardo Barros ca8bd38bf6 sys_swapon: separate parsing of swapfile header
Move the code which parses and checks the swapfile header (except for
the bad block list) to a separate function. Only code movement, no
functional changes.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 5de771e41f sys_swapon: move setting of swapfilepages near use
There is no reason I can see to read inode->i_size long before it is
needed. Move its read to just before it is needed, to reduce the
variable lifetime.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 87ade72a79 sys_swapon: simplify error flow in claim_swapfile()
Since there is no cleanup to do, there is no reason to jump to a label.
Return directly instead.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 4d0e1e1075 sys_swapon: separate bdev claim and inode lock
Move the code which claims the bdev (S_ISBLK) or locks the inode
(S_ISREG) to a separate function. Only code movement, no functional
changes.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros bd69010b04 sys_swapon: use a single error label
sys_swapon currently has two error labels, bad_swap and bad_swap_2.
bad_swap does the same as bad_swap_2 plus destroy_swap_extents() and
swap_cgroup_swapoff(); both are noops in the places where bad_swap_2 is
jumped to. With a single extra test for inode (matching the one in the
S_ISREG case below), all the error paths in the function can go to
bad_swap.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 9b01c350af sys_swapon: do only cleanup in the cleanup blocks
The only way error is 0 in the cleanup blocks is when the function is
returning successfully. In this case, the cleanup blocks were setting
S_SWAPFILE in the S_ISREG case. But this is not a cleanup.

Move the setting of S_SWAPFILE to just before the "goto out;" to make
this more clear. At this point, we do not need to test for inode because
it will never be NULL.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros f2090d2df5 sys_swapon: remove bdev variable
The bdev variable is always equivalent to (S_ISBLK(inode->i_mode) ?
p->bdev : NULL), as long as it being set is moved to a bit earlier. Use
this fact to remove the bdev variable.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 7de7fb6b34 sys_swapon: move setting of error nearer use
Move the setting of the error variable nearer the goto in a few places.

Avoids calling PTR_ERR() if not IS_ERR() in two places, and makes the
error condition more explicit in two other places.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 83ef99befc sys_swapon: remove did_down variable
Since mutex_lock(&inode->i_mutex) is called just after setting inode,
did_down is always equivalent to (inode && S_ISREG(inode->i_mode)).

Use this fact to remove the did_down variable.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 28b36bd741 sys_swapon: remove initial value of name variable
Now there is nothing which jumps to the cleanup blocks before the name
variable is set. There is no need to set it initially to NULL anymore.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:07 -07:00
Cesar Eduardo Barros 730c0581c8 sys_swapon: simplify error flow in alloc_swap_info()
Since there is no cleanup to do, there is no reason to jump to a label.
Return directly instead.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:06 -07:00
Cesar Eduardo Barros 2542e5134d sys_swapon: simplify error return from swap_info allocation
At this point in sys_swapon, there is nothing to free. Return directly
instead of jumping to the cleanup block at the end of the function.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:06 -07:00
Cesar Eduardo Barros 53cbb2435f sys_swapon: separate swap_info allocation
Move the swap_info allocation to its own function. Only code movement,
no functional changes.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:06 -07:00
Cesar Eduardo Barros e8e6c2ec40 sys_swapon: do not depend on "type" after allocation
Within sys_swapon, after the swap_info entry has been allocated, we
always have type == p->type and swap_info[type] == p. Use this fact to
reduce the dependency on the "type" local variable within the function,
as a preparation to move the allocation of the swap_info entry to a
separate function.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujisu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:06 -07:00
Cesar Eduardo Barros 80b0df12b8 sys_swapon: remove changelog from function comment
Changelogs belong in the git history instead of in the source code.

Also, "The swapon system call" is redundant with
"SYSCALL_DEFINE2(swapon, ...)".

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Gaah. That's a _historical_ comment. But the patch-series depends on removal ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:05 -07:00
Cesar Eduardo Barros 803d0c8351 sys_swapon: use vzalloc() instead of vmalloc/memset
This patch series refactors the sys_swapon function.

sys_swapon is currently a very large function, with 313 lines (more than
12 25-line screens), which can make it a bit hard to read. This patch
series reduces this size by half, by extracting large chunks of related
code to new helper functions.

One of these chunks of code was nearly identical to the part of
sys_swapoff which is used in case of a failure return from
try_to_unuse(), so this patch series also makes both share the same
code.

As a side effect of all this refactoring, the compiled code gets a bit
smaller (from v1 of this patch series):

   text       data        bss        dec        hex    filename
  14012        944        276      15232       3b80    mm/swapfile.o.before
  13941        944        276      15161       3b39    mm/swapfile.o.after

This patch:

Use vzalloc() instead of vmalloc/memset.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Eric B Munson <emunson@mgebm.net>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:05 -07:00
Mel Gorman 52c50567d8 mm: swap: unlock swapfile inode mutex before closing file on bad swapfiles
If an administrator tries to swapon a file backed by NFS, the inode mutex is
taken (as it is for any swapfile) but later identified to be a bad swapfile
due to the lack of bmap and tries to cleanup. During cleanup, an attempt is
made to close the file but with inode->i_mutex still held. Closing an NFS
file syncs it which tries to acquire the inode mutex leading to deadlock. If
lockdep is enabled the following appears on the console;

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.38-rc8-autobuild #1
    ---------------------------------------------
    swapon/2192 is trying to acquire lock:
     (&sb->s_type->i_mutex_key#13){+.+.+.}, at: vfs_fsync_range+0x47/0x7c

    but task is already holding lock:
     (&sb->s_type->i_mutex_key#13){+.+.+.}, at: sys_swapon+0x28d/0xae7

    other info that might help us debug this:
    1 lock held by swapon/2192:
     #0:  (&sb->s_type->i_mutex_key#13){+.+.+.}, at: sys_swapon+0x28d/0xae7

    stack backtrace:
    Pid: 2192, comm: swapon Not tainted 2.6.38-rc8-autobuild #1
    Call Trace:
        __lock_acquire+0x2eb/0x1623
        find_get_pages_tag+0x14a/0x174
        pagevec_lookup_tag+0x25/0x2e
        vfs_fsync_range+0x47/0x7c
        lock_acquire+0xd3/0x100
        vfs_fsync_range+0x47/0x7c
        nfs_flush_one+0x0/0xdf [nfs]
        mutex_lock_nested+0x40/0x2b1
        vfs_fsync_range+0x47/0x7c
        vfs_fsync_range+0x47/0x7c
        vfs_fsync+0x1c/0x1e
        nfs_file_flush+0x64/0x69 [nfs]
        filp_close+0x43/0x72
        sys_swapon+0xa39/0xae7
        sysret_check+0x2e/0x69
        system_call_fastpath+0x16/0x1b

This patch releases the mutex if its held before calling filep_close()
so swapon fails as expected without deadlock when the swapfile is backed
by NFS.  If accepted for 2.6.39, it should also be considered a -stable
candidate for 2.6.38 and 2.6.37.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@kernel.org>		[2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:58 -07:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Miklos Szeredi 8074b26f67 mm: fix refcounting in swapon
Grab a reference to bdev before calling blkdev_get(), which expects
the refcount to be already incremented and either returns success or
decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-24 08:55:01 -08:00
Andrea Arcangeli 3f04f62f90 thp: split_huge_page paging
Paging logic that splits the page before it is unmapped and added to swap
to ensure backwards compatibility with the legacy swap code.  Eventually
swap should natively pageout the hugepages to increase performance and
decrease seeking and fragmentation of swap space.  swapoff can just skip
over huge pmd as they cannot be part of swap yet.  In add_to_swap be
careful to split the page only if we got a valid swap entry so we don't
split hugepages with a full swap.

In theory we could split pages before isolating them during the lru scan,
but for khugepaged to be safe, I'm relying on either mmap_sem write mode,
or PG_lock taken, so split_huge_page has to run either with mmap_sem
read/write mode or PG_lock taken.  Calling it from isolate_lru_page would
make locking more complicated, in addition to that split_huge_page would
deadlock if called by __isolate_lru_page because it has to take the lru
lock to add the tail pages.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:41 -08:00
Tejun Heo e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Kay Sievers 66d7dd518a /proc/swaps: support polling
System management wants to subscribe to changes in swap configuration.
Make /proc/swaps pollable like /proc/mounts.

[akpm@linux-foundation.org: document proc_poll_event]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg KH <greg@kroah.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:11 -07:00
Jens Axboe fa251f8990 Merge branch 'v2.6.36-rc8' into for-2.6.37/barrier
Conflicts:
	block/blk-core.c
	drivers/block/loop.c
	mm/swapfile.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:13:04 +02:00
Christoph Hellwig dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Christoph Hellwig 349f429eec swap: do not send discards as barriers
The swap code already uses synchronous discards, no need to add I/O barriers.

tj: superflous newlines removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:39 +02:00
Hugh Dickins 3399446632 swap: discard while swapping only if SWAP_FLAG_DISCARD
Tests with recent firmware on Intel X25-M 80GB and OCZ Vertex 60GB SSDs
show a shift since I last tested in December: in part because of firmware
updates, in part because of the necessary move from barriers to awaiting
completion at the block layer.  While discard at swapon still shows as
slightly beneficial on both, discarding 1MB swap cluster when allocating
is now disadvanteous: adds 25% overhead on Intel, adds 230% on OCZ (YMMV).

Surrender: discard as presently implemented is more hindrance than help
for swap; but might prove useful on other devices, or with improvements.
So continue to do the discard at swapon, but make discard while swapping
conditional on a SWAP_FLAG_DISCARD to sys_swapon() (which has been using
only the lower 16 bits of int flags).

We can add a --discard or -d to swapon(8), and a "discard" to swap in
/etc/fstab: matching the mount option for btrfs, ext4, fat, gfs2, nilfs2.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:25 -07:00
Christoph Hellwig 8f2ae0faa3 swap: do not send discards as barriers
The swap code already uses synchronous discards, no need to add I/O
barriers.

This fixes the worst of the terrible slowdown in swap allocation for
hibernation, reported on 2.6.35 by Nigel Cunningham; but does not entirely
eliminate that regression.

[tj@kernel.org: superflous newlines removed]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:25 -07:00
Hugh Dickins b73d7fcecd swap: prevent reuse during hibernation
Move the hibernation check from scan_swap_map() into try_to_free_swap():
to catch not only the common case when hibernation's allocation itself
triggers swap reuse, but also the less likely case when concurrent page
reclaim (shrink_page_list) might happen to try_to_free_swap from a page.

Hibernation already clears __GFP_IO from the gfp_allowed_mask, to stop
reclaim from going to swap: check that to prevent swap reuse too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:25 -07:00
Hugh Dickins 910321ea81 swap: revert special hibernation allocation
Please revert 2.6.36-rc commit d2997b1042
"hibernation: freeze swap at hibernation".  It complicated matters by
adding a second swap allocation path, just for hibernation; without in any
way fixing the issue that it was intended to address - page reclaim after
fixing the hibernation image might free swap from a page already imaged as
swapcache, letting its swap be reallocated to store a different page of
the image: resulting in data corruption if the imaged page were freed as
clean then swapped back in.  Pages freed to si->swap_map were still in
danger of being reallocated by the alternative allocation path.

I guess it inadvertently fixed slow SSD swap allocation for hibernation,
as reported by Nigel Cunningham: by missing out the discards that occur on
the usual swap allocation path; but that was unintentional, and needs a
separate fix.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:25 -07:00
KAMEZAWA Hiroyuki d2997b1042 hibernation: freeze swap at hibernation
When taking a memory snapshot in hibernate_snapshot(), all (directly
called) memory allocations use GFP_ATOMIC.  Hence swap misusage during
hibernation never occurs.

But from a pessimistic point of view, there is no guarantee that no page
allcation has __GFP_WAIT.  It is better to have a global indication "we
enter hibernation, don't use swap!".

This patch tries to freeze new-swap-allocation during hibernation.  (All
user processes are frozenm so swapin is not a concern).

This way, no updates will happen to swap_map[] between
hibernate_snapshot() and save_image().  Swap is thawed when swsusp_free()
is called.  We can be assured that swap corruption will not occur.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:04 -07:00
KAMEZAWA Hiroyuki 966cca029f mm: fix corruption of hibernation caused by reusing swap during image saving
Since 2.6.31, swap_map[]'s refcounting was changed to show that a used
swap entry is just for swap-cache, can be reused.  Then, while scanning
free entry in swap_map[], a swap entry may be able to be reclaimed and
reused.  It was caused by commit c9e444103b ("mm: reuse unused swap
entry if necessary").

But this caused deta corruption at resume. The scenario is

- Assume a clean-swap cache, but mapped.

- at hibernation_snapshot[], clean-swap-cache is saved as
  clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE.

- then, save_image() is called.  And reuse SWAP_HAS_CACHE entry to save
  image, and break the contents.

After resume:

- the memory reclaim runs and finds clean-not-referenced-swap-cache and
  discards it because it's marked as clean.  But here, the contents on
  disk and swap-cache is inconsistent.

Hance memory is corrupted.

This patch avoids the bug by not reclaiming swap-entry during hibernation.
This is a quick fix for backporting.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:04 -07:00
Linus Torvalds d79df0b1ed Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (577 commits)
  Staging: ramzswap: Handler for swap slot free callback
  swap: Add swap slot free callback to block_device_operations
  swap: Add flag to identify block swap devices
  Staging: vt6655: use ETH_FRAME_LEN macro instead of custom one
  Staging: vt6655: use ETH_DATA_LEN macro instead of custom one
  Staging: vt6655: use ETH_FCS_LEN macro instead of custom one
  Staging: vt6656: use ETH_HLEN macro instead of custom one
  Staging: comedi: quatech_daqp_cs.c Replace eos semaphore with a completion.
  Staging: dt3155v4l: remove private memory allocator
  Staging: crystalhd: Remove typedefs from driver
  Staging: winbond: Fix for pointer name format issue in mds.c
  Staging: vt6656: removed custom UCHAR/USHORT/UINT/ULONG/ULONGLONG typedefs
  Staging: vt6656: removed custom CHAR/SHORT/INT/LONG typedefs
  Staging: comedi: Altered the way printk is used in 8255.c
  staging: iio: adis16350 and similar IMU driver
  Staging: iio: max1363 Fix two bugs in single_channel_from_ring
  Staging: iio: adis16220 extract bin_attribute structures from state
  Staging: iio: adis16220 vibration sensor driver
  Staging: comedi: Kconfig dependancy fixes
  Staging: comedi: fix up build error from last Kconfig changes
  ...
2010-05-21 15:26:46 -07:00
Nitin Gupta b3a27d0529 swap: Add swap slot free callback to block_device_operations
This callback is required when RAM based devices are used as swap disks.
One such device is ramzswap which is used as compressed in-memory swap
disk.  For such devices, we need a callback as soon as a swap slot is no
longer used to allow freeing memory allocated for this slot.  Without this
callback, stale data can quickly accumulate in memory defeating the whole
purpose of such devices.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-18 15:07:52 -07:00
Nitin Gupta b272564395 swap: Add flag to identify block swap devices
Added SWP_BLKDEV flag to distinguish block and regular file backed
swap devices. We could also check if a swap is entire block device,
rather than a file, by:
S_ISBLK(swap_info_struct->swap_file->f_mapping->host->i_mode)
but, I think, simply checking this flag is more convenient.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-18 15:07:52 -07:00
Dmitry Monakhov fbd9b09a17 blkdev: generalize flags for blkdev_issue_fn functions
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Daisuke Nishimura 024914477e memcg: move charges of anonymous swap
This patch is another core part of this move-charge-at-task-migration
feature.  It enables moving charges of anonymous swaps.

To move the charge of swap, we need to exchange swap_cgroup's record.

In current implementation, swap_cgroup's record is protected by:

  - page lock: if the entry is on swap cache.
  - swap_lock: if the entry is not on swap cache.

This works well in usual swap-in/out activity.

But this behavior make the feature of moving swap charge check many
conditions to exchange swap_cgroup's record safely.

So I changed modification of swap_cgroup's recored(swap_cgroup_record())
to use xchg, and define a new function to cmpxchg swap_cgroup's record.

This patch also enables moving charge of non pte_present but not uncharged
swap caches, which can be exist on swap-out path, by getting the target
pages via find_get_page() as do_mincore() does.

[kosaki.motohiro@jp.fujitsu.com: fix ia64 build]
[akpm@linux-foundation.org: fix typos]
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:36 -08:00
Hugh Dickins 08259d58e4 mm: add comment on swap_duplicate's error code
swap_duplicate()'s loop appears to miss out on returning the error code
from __swap_duplicate(), except when that's -ENOMEM.  In fact this is
intentional: prior to -ENOMEM for swap_count_continuation,
swap_duplicate() was void (and the case only occurs when copy_one_pte()
hits a corrupt pte).  But that's surprising behaviour, which certainly
deserves a comment.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:27 -08:00
Hugh Dickins ad2bd7e0e9 mm/swapfile.c: fix swapon size off-by-one
There's an off-by-one disagreement between mkswap and swapon about the
meaning of swap_header last_page: mkswap (in all versions I've looked at:
util-linux-ng and BusyBox and old util-linux; probably as far back as
1999) consistently means the offset (in page units) of the last page of
the swap area, whereas kernel sys_swapon (as far back as 2.2 and 2.3)
strangely takes it to mean the size (in page units) of the swap area.

This disagreement is the safe way round; but it's worrying people, and
loses us one page of swap.

The fix is not just to add one to nr_good_pages: we need to get maxpages
(the size of the swap_map array) right before that; and though that is an
unsigned long, be careful not to overflow the unsigned int p->max which
later holds it (probably why header uses __u32 last_page instead of size).

Why did we subtract one from the maximum swp_offset to calculate maxpages?
 Though it was probably me who made that change in 2.4.10, I don't get it:
and now we should be adding one (without risk of overflow in this case).

Fix the handling of swap_header badpages: it could have overrun the
swap_map when very large swap area used on a more limited architecture.

Remove pre-initializations of swap_header, nr_good_pages and maxpages:
those date from when sys_swapon was supporting other versions of header.

Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:26 -08:00
KAMEZAWA Hiroyuki b084d4353f mm: count swap usage
A frequent questions from users about memory management is what numbers of
swap ents are user for processes.  And this information will give some
hints to oom-killer.

Besides we can count the number of swapents per a process by scanning
/proc/<pid>/smaps, this is very slow and not good for usual process
information handler which works like 'ps' or 'top'.  (ps or top is now
enough slow..)

This patch adds a counter of swapents to mm_counter and update is at each
swap events.  Information is exported via /proc/<pid>/status file as

[kamezawa@bluextal memory]$ cat /proc/self/status
Name:   cat
State:  R (running)
Tgid:   2910
Pid:    2910
PPid:   2823
TracerPid:      0
Uid:    500     500     500     500
Gid:    500     500     500     500
FDSize: 256
Groups: 500
VmPeak:    82696 kB
VmSize:    82696 kB
VmLck:         0 kB
VmHWM:       432 kB
VmRSS:       432 kB
VmData:      172 kB
VmStk:        84 kB
VmExe:        48 kB
VmLib:      1568 kB
VmPTE:        40 kB
VmSwap:        0 kB <=============== this.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:24 -08:00
KAMEZAWA Hiroyuki d559db086f mm: clean up mm_counter
Presently, per-mm statistics counter is defined by macro in sched.h

This patch modifies it to
  - defined in mm.h as inlinf functions
  - use array instead of macro's name creation.

This patch is for reducing patch size in future patch to modify
implementation of per-mm counter.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:23 -08:00
Hugh Dickins 5ad6468801 ksm: let shared pages be swappable
Initial implementation for swapping out KSM's shared pages: add
page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when
faced with a PageKsm page.

Most of what's needed can be got from the rmap_items listed from the
stable_node of the ksm page, without discovering the actual vma: so in
this patch just fake up a struct vma for page_referenced_one() or
try_to_unmap_one(), then refine that in the next patch.

Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been
implicit there (being only set with VM_SHARED, already excluded), but
let's make it explicit, to help justify the lack of nonlinear unmap.

Rely on the page lock to protect against concurrent modifications to that
page's node of the stable tree.

The awkward part is not swapout but swapin: do_swap_page() and
page_add_anon_rmap() now have to allow for new possibilities - perhaps a
ksm page still in swapcache, perhaps a swapcache page associated with one
location in one anon_vma now needed for another location or anon_vma.
(And the vma might even be no longer VM_MERGEABLE when that happens.)

ksm_might_need_to_copy() checks for that case, and supplies a duplicate
page when necessary, simply leaving it to a subsequent pass of ksmd to
rediscover the identity and merge them back into one ksm page.
Disappointingly primitive: but the alternative would have to accumulate
unswappable info about the swapped out ksm pages, limiting swappability.

Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the
particular case it was handling, so just use it instead.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:19 -08:00
Hugh Dickins 3ca7b3c5b6 mm: define PAGE_MAPPING_FLAGS
At present we define PageAnon(page) by the low PAGE_MAPPING_ANON bit set
in page->mapping, with the higher bits a pointer to the anon_vma; and have
defined PageKsm(page) as that with NULL anon_vma.

But KSM swapping will need to store a pointer there: so in preparation for
that, now define PAGE_MAPPING_FLAGS as the low two bits, including
PAGE_MAPPING_KSM (always set along with PAGE_MAPPING_ANON, until some
other use for the bit emerges).

Declare page_rmapping(page) to return the pointer part of page->mapping,
and page_anon_vma(page) to return the anon_vma pointer when that's what it
is.  Use these in a few appropriate places: notably, unuse_vma() has been
testing page->mapping, but is better to be testing page_anon_vma() (cases
may be added in which flag bits are set without any pointer).

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:17 -08:00
Lee Schermerhorn d4906e1aa5 swap: rework map_swap_page() again
Seems that page_io.c doesn't really need to know that page_private(page)
is the swp_entry 'val'.  Rework map_swap_page() to do what its name says
and map a page to a page offset in the swap space.

The only other caller of map_swap_page() is internal to mm/swapfile.c and
it does want to map a swap entry to the 'sector'.  So rename
map_swap_page() to map_swap_entry(), make it 'static' and and implement
map_swap_page() as a wrapper around that.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:16 -08:00
Hugh Dickins aaa468653b swap_info: note SWAP_MAP_SHMEM
While we're fiddling with the swap_map values, let's assign a particular
value to shmem/tmpfs swap pages: their swap counts are never incremented,
and it helps swapoff's try_to_unuse() a little if it can immediately
distinguish those pages from process pages.

Since we've no use for SWAP_MAP_BAD | COUNT_CONTINUED,
we might as well use that 0xbf value for SWAP_MAP_SHMEM.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:16 -08:00
Hugh Dickins 570a335b8e swap_info: swap count continuations
Swap is duplicated (reference count incremented by one) whenever the same
swap page is inserted into another mm (when forking finds a swap entry in
place of a pte, or when reclaim unmaps a pte to insert the swap entry).

swap_info_struct's vmalloc'ed swap_map is the array of these reference
counts: but what happens when the unsigned short (or unsigned char since
the preceding patch) is full? (and its high bit is kept for a cache flag)

We then lose track of it, never freeing, leaving it in use until swapoff:
at which point we _hope_ that a single pass will have found all instances,
assume there are no more, and will lose user data if we're wrong.

Swapping of KSM pages has not yet been enabled; but it is implemented,
and makes it very easy for a user to overflow the maximum swap count:
possible with ordinary process pages, but unlikely, even when pid_max
has been raised from PID_MAX_DEFAULT.

This patch implements swap count continuations: when the count overflows,
a continuation page is allocated and linked to the original vmalloc'ed
map page, and this used to hold the continuation counts for that entry
and its neighbours.  These continuation pages are seldom referenced:
the common paths all work on the original swap_map, only referring to
a continuation page when the low "digit" of a count is incremented or
decremented through SWAP_MAP_MAX.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins 8d69aaee80 swap_info: swap_map of chars not shorts
Halve the vmalloc'ed swap_map array from unsigned shorts to unsigned
chars: it's still very unusual to reach a swap count of 126, and the
next patch allows it to be extended indefinitely.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins 253d553ba7 swap_info: SWAP_HAS_CACHE cleanups
Though swap_count() is useful, I'm finding that swap_has_cache() and
encode_swapmap() obscure what happens in the swap_map entry, just at
those points where I need to understand it.  Remove them, and pass
more usable "usage" values to scan_swap_map(), swap_entry_free() and
__swap_duplicate(), instead of the SWAP_MAP and SWAP_CACHE enum.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins 73c34b6acc swap_info: miscellaneous minor cleanups
Move CONFIG_HIBERNATION's swapdev_block() into the main CONFIG_HIBERNATION
block, remove extraneous whitespace and return, fix typo in a comment.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins 9625a5f289 swap_info: include first_swap_extent
Make better use of the space by folding first swap_extent into its
swap_info_struct, instead of just the list_head: swap partitions need
only that one, and for others it's used as a circular list anyway.

[jirislaby@gmail.com: fix crash on double swapon]
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins efa90a981b swap_info: change to array of pointers
The swap_info_struct is only 76 or 104 bytes, but it does seem wrong
to reserve an array of about 30 of them in bss, when most people will
want only one.  Change swap_info[] to an array of pointers.

That does need a "type" field in the structure: pack it as a char with
next type and short prio (aha, char is unsigned by default on PowerPC).
Use the (admittedly peculiar) name "type" throughout for this index.

/proc/swaps does not take swap_lock: I wouldn't want it to, but do take
care with barriers when adding a new item to the array (never removed).

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:15 -08:00
Hugh Dickins f29ad6a99b swap_info: private to swapfile.c
The swap_info_struct is mostly private to mm/swapfile.c, with only
one other in-tree user: get_swap_bio().  Adjust its interface to
map_swap_page(), so that we can then remove get_swap_info_struct().

But there is a popular user out-of-tree, TuxOnIce: so leave the
declaration of swap_info_struct in linux/swap.h.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Nigel Cunningham <ncunningham@crca.org.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:13 -08:00
Bo Liu 32c5fc10e7 mm: remove incorrect swap_count() from try_to_unuse()
In try_to_unuse(), swcount is a local copy of *swap_map, including the
SWAP_HAS_CACHE bit; but a wrong comparison against swap_count(*swap_map),
which masks off the SWAP_HAS_CACHE bit, succeeded where it should fail.

That had the effect of resetting the mm from which to start searching
for the next swap page, to an irrelevant mm instead of to an mm in which
this swap page had been found: which may increase search time by ~20%.
But we're used to swapoff being slow, so never noticed the slowdown.

Remove that one spurious use of swap_count(): Bo Liu thought it merely
redundant, Hugh rewrote the description since it was measurably wrong.

Signed-off-by: Bo Liu <bo-liu@hotmail.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-02 09:44:41 -08:00
Suresh Jayaraman 3bd0f0c763 swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL
While testing Swap over NFS patchset, I noticed an oops that was triggered
during swapon. Investigating further, the NULL pointer deference is due to the
SSD device check/optimization in the swapon code that assumes s_bdev could never
be NULL.

inode->i_sb->s_bdev could be NULL in a few cases. For e.g. one such case is
loopback NFS mount, there could be others as well. Fix this by ensuring s_bdev
is not NULL before we try to deference s_bdev.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:46 +02:00
Linus Torvalds db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Hugh Dickins 35451beecb ksm: unmerge is an origin of OOMs
Just as the swapoff system call allocates many pages of RAM to various
processes, perhaps triggering OOM, so "echo 2 >/sys/kernel/mm/ksm/run"
(unmerge) is liable to allocate many pages of RAM to various processes,
perhaps triggering OOM; and each is normally run from a modest admin
process (swapoff or shell), easily repeated until it succeeds.

So treat unmerge_and_remove_all_rmap_items() in the same way that we treat
try_to_unuse(): generalize PF_SWAPOFF to PF_OOM_ORIGIN, and bracket both
with that, to ask the OOM killer to kill them first, to prevent them from
spawning more and more OOM kills.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:33 -07:00
Andi Kleen a7420aa54d HWPOISON: Add support for poison swap entries v2
Memory migration uses special swap entry types to trigger special actions on
page faults. Extend this mechanism to also support poisoned swap entries, to
trigger poison handling on page faults. This allows follow-on patches to
prevent processes from faulting in poisoned pages again.

v2: Fix overflow in MAX_SWAPFILES (Fengguang Wu)
v3: Better overflow fix (Hidehiro Kawai)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:05 +02:00
Christoph Hellwig 746cd1e7e4 block: use blkdev_issue_discard in blk_ioctl_discard
blk_ioctl_discard duplicates large amounts of code from blkdev_issue_discard,
the only difference between the two is that blkdev_issue_discard needs to
send a barrier discard request and blk_ioctl_discard a non-barrier one,
and blk_ioctl_discard needs to wait on the request.  To facilitates this
add a flags argument to blkdev_issue_discard to control both aspects of the
behaviour.  This will be very useful later on for using the waiting
funcitonality for other callers.

Based on an earlier patch from Matthew Wilcox <matthew@wil.cx>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:53 +02:00
Alan Jenkins dddac6a7b4 PM / Hibernate: Replace bdget call with simple atomic_inc of i_count
Create bdgrab().  This function copies an existing reference to a
block_device.  It is safe to call from any context.

Hibernation code wishes to copy a reference to the active swap device.
Right now it calls bdget() under a spinlock, but this is wrong because
bdget() can sleep.  It doesn't need a full bdget() because we already
hold a reference to active swap devices (and the spinlock protects
against swapoff).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-29 21:07:55 +02:00
KAMEZAWA Hiroyuki 8a9478ca7f memcg: fix swap accounting
This patch fixes mis-accounting of swap usage in memcg.

In the current implementation, memcg's swap account is uncharged only when
swap is completely freed.  But there are several cases where swap cannot
be freed cleanly.  For handling that, this patch changes that memcg
uncharges swap account when swap has no references other than cache.

By this, memcg's swap entry accounting can be fully synchronous with the
application's behavior.

This patch also changes memcg's hooks for swap-out.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
KAMEZAWA Hiroyuki c9e444103b mm: reuse unused swap entry if necessary
Presently we can know a swap entry is just used as SwapCache via swap_map,
without looking up swap cache.

Then, we have a chance to reuse swap-cache-only swap entries in
get_swap_pages().

This patch tries to free swap-cache-only swap entries if swap is not
enough.

Note: We hit following path when swap_cluster code cannot find a free
cluster.  Then, vm_swap_full() is not only condition to allow the kernel
to reclaim unused swap.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
KAMEZAWA Hiroyuki 355cfa73dd mm: modify swap_map and add SWAP_HAS_CACHE flag
This is a part of the patches for fixing memcg's swap accountinf leak.
But, IMHO, not a bad patch even if no memcg.

There are 2 kinds of references to swap.
 - reference from swap entry
 - reference from swap cache

Then,

 - If there is swap cache && swap's refcnt is 1, there is only swap cache.
  (*) swapcount(entry) == 1 && find_get_page(swapper_space, entry) != NULL

This counting logic have worked well for a long time.  But considering
that we cannot know there is a _real_ reference or not by swap_map[],
current usage of counter is not very good.

This patch adds a flag SWAP_HAS_CACHE and recored information that a swap
entry has a cache or not.  This will remove -1 magic used in swapfile.c
and be a help to avoid unnecessary find_get_page().

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
KAMEZAWA Hiroyuki cb4b86ba47 mm: add swap cache interface for swap reference
In a following patch, the usage of swap cache is recorded into swap_map.
This patch is for necessary interface changes to do that.

2 interfaces:

  - swapcache_prepare()
  - swapcache_free()

are added for allocating/freeing refcnt from swap-cache to existing swap
entries.  But implementation itself is not changed under this patch.  At
adding swapcache_free(), memcg's hook code is moved under
swapcache_free().  This is better than using scattered hooks.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
Alan Jenkins a1bb7d6123 PM/hibernate: fix "swap breaks after hibernation failures"
http://bugzilla.kernel.org/show_bug.cgi?id=12239

The image writing code dropped a reference to the current swap device.
This doesn't show up if the hibernation succeeds - because it doesn't
affect the image which gets resumed.  But it means multiple _failed_
hibernations end up freeing the swap device while it is still use!

swsusp_write() finds the block device for the swap file using swap_type_of().
It then uses blkdev_get() / blkdev_put() to open and close the block device.

Unfortunately, blkdev_get() assumes ownership of the inode of the block_device
passed to it.  So blkdev_put() calls iput() on the inode.  This is by design
and other callers expect this behaviour.  The fix is for swap_type_of() to take
a reference on the inode using bdget().

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21 14:17:17 -08:00
KAMEZAWA Hiroyuki 85d9fc89fb memcg: fix refcnt handling at swapoff
Now, at swapoff, even while try_charge() fails, commit is executed.  This
is a bug which turns the refcnt of cgroup_subsys_state negative.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29 18:04:43 -08:00
Heiko Carstens c4ea37c26a [CVE-2009-0029] System call wrappers part 26
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:29 +01:00
KAMEZAWA Hiroyuki 2c26fdd70c memcg: revert gfp mask fix
My patch, memcg-fix-gfp_mask-of-callers-of-charge.patch changed gfp_mask
of callers of charge to be GFP_HIGHUSER_MOVABLE for showing what will
happen at memory reclaim.

But in recent discussion, it's NACKed because it sounds ugly.

This patch is for reverting it and add some clean up to gfp_mask of
callers of charge.  No behavior change but need review before generating
HUNK in deep queue.

This patch also adds explanation to meaning of gfp_mask passed to charge
functions in memcontrol.h.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:06 -08:00
KAMEZAWA Hiroyuki 8c7c6e34a1 memcg: mem+swap controller core
This patch implements per cgroup limit for usage of memory+swap.  However
there are SwapCache, double counting of swap-cache and swap-entry is
avoided.

Mem+Swap controller works as following.
  - memory usage is limited by memory.limit_in_bytes.
  - memory + swap usage is limited by memory.memsw_limit_in_bytes.

This has following benefits.
  - A user can limit total resource usage of mem+swap.

    Without this, because memory resource controller doesn't take care of
    usage of swap, a process can exhaust all the swap (by memory leak.)
    We can avoid this case.

    And Swap is shared resource but it cannot be reclaimed (goes back to memory)
    until it's used. This characteristic can be trouble when the memory
    is divided into some parts by cpuset or memcg.
    Assume group A and group B.
    After some application executes, the system can be..

    Group A -- very large free memory space but occupy 99% of swap.
    Group B -- under memory shortage but cannot use swap...it's nearly full.

    Ability to set appropriate swap limit for each group is required.

Maybe someone wonder "why not swap but mem+swap ?"

  - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
    to move account from memory to swap...there is no change in usage of
    mem+swap.

    In other words, when we want to limit the usage of swap without affecting
    global LRU, mem+swap limit is better than just limiting swap.

Accounting target information is stored in swap_cgroup which is
per swap entry record.

Charge is done as following.
  map
    - charge  page and memsw.

  unmap
    - uncharge page/memsw if not SwapCache.

  swap-out (__delete_from_swap_cache)
    - uncharge page
    - record mem_cgroup information to swap_cgroup.

  swap-in (do_swap_page)
    - charged as page and memsw.
      record in swap_cgroup is cleared.
      memsw accounting is decremented.

  swap-free (swap_free())
    - if swap entry is freed, memsw is uncharged by PAGE_SIZE.

There are people work under never-swap environments and consider swap as
something bad. For such people, this mem+swap controller extension is just an
overhead.  This overhead is avoided by config or boot option.
(see Kconfig. detail is not in this patch.)

TODO:
 - maybe more optimization can be don in swap-in path. (but not very safe.)
   But we just do simple accounting at this stage.

[nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex]
[hugh@veritas.com: memswap controller core swapcache fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki 27a7faa077 memcg: swap cgroup for remembering usage
For accounting swap, we need a record per swap entry, at least.

This patch adds following function.
  - swap_cgroup_swapon() .... called from swapon
  - swap_cgroup_swapoff() ... called at the end of swapoff.

  - swap_cgroup_record() .... record information of swap entry.
  - swap_cgroup_lookup() .... lookup information of swap entry.

This patch just implements "how to record information".  No actual method
for limit the usage of swap.  These routine uses flat table to record and
lookup.  "wise" lookup system like radix-tree requires requires memory
allocation at new records but swap-out is usually called under memory
shortage (or memcg hits limit.) So, I used static allocation.  (maybe
dynamic allocation is not very hard but it adds additional memory
allocation in memory shortage path.)

Note1: In this, we use pointer to record information and this means
      8bytes per swap entry. I think we can reduce this when we
      create "id of cgroup" in the range of 0-65535 or 0-255.

Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Hugh Dickins <hugh@veritas.com>
Reported-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki bced0520fe memcg: fix gfp_mask of callers of charge
Fix misuse of gfp_kernel.

Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.

I think that this is from the fact that page_cgroup *was* dynamically
allocated.

But now, we allocate all page_cgroup at boot.  And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.

  * This is because we just want to reduce memory usage.
    "Where we should reclaim from ?" is not a problem in memcg.

This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.

Note: This patch is not for fixing behavior but for showing sane information
      in source code.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
KAMEZAWA Hiroyuki 7a81b88cb5 memcg: introduce charge-commit-cancel style of functions
There is a small race in do_swap_page().  When the page swapped-in is
charged, the mapcount can be greater than 0.  But, at the same time some
process (shares it ) call unmap and make mapcount 1->0 and the page is
uncharged.

      CPUA 			CPUB
       mapcount == 1.
   (1) charge if mapcount==0     zap_pte_range()
                                (2) mapcount 1 => 0.
			        (3) uncharge(). (success)
   (4) set page's rmap()
       mapcount 0=>1

Then, this swap page's account is leaked.

For fixing this, I added a new interface.
  - charge
   account to res_counter by PAGE_SIZE and try to free pages if necessary.
  - commit
   register page_cgroup and add to LRU if necessary.
  - cancel
   uncharge PAGE_SIZE because of do_swap_page failure.

     CPUA
  (1) charge (always)
  (2) set page's rmap (mapcount > 0)
  (3) commit charge was necessary or not after set_pte().

This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting.
Usual mem_cgroup_charge_common() does charge -> commit at a time.

And this patch also adds following function to clarify all charges.

  - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge()
	called against newly allocated anon pages.

  - mem_cgroup_charge_migrate_fixup()
        called only from remove_migration_ptes().
	we'll have to rewrite this later.(this patch just keeps old behavior)
	This function will be removed by additional patch to make migration
	clearer.

Good for clarifying "what we do"

Then, we have 4 following charge points.
  - newpage
  - swap-in
  - add-to-cache.
  - migration.

[akpm@linux-foundation.org: add missing inline directives to stubs]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
KOSAKI Motohiro 084f71ae5c mm: kill page_queue_congested()
page_queue_congested() was introduced in 2002, but it was never used

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:10 -08:00
Hugh Dickins 2509ef26db badpage: zap print_bad_pte on swap and file
Complete zap_pte_range()'s coverage of bad pagetable entries by calling
print_bad_pte() on a pte_file in a linear vma and on a bad swap entry.
That needs free_swap_and_cache() to tell it, which will also have shown
one of those "swap_free" errors (but with much less information).

Similar checks in fork's copy_one_pte()?  No, that would be more noisy
than helpful: we'll see them when parent and child exec or exit.

Where do_nonlinear_fault() calls print_bad_pte(): omit !VM_CAN_NONLINEAR
case, that could only be a bug in sys_remap_file_pages(), not a bad pte.
VM_FAULT_OOM rather than VM_FAULT_SIGBUS?  Well, okay, that is consistent
with what happens if do_swap_page() operates a bad swap entry; but don't
we have patches to be more careful about killing when VM_FAULT_OOM?

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Hugh Dickins f0d7a4b3ed swapfile: let others seed random
Remove the srandom32((u32)get_seconds()) from non-rotational swapon:
there's been a coincidental discussion of earlier randomization, assume
that goes ahead, let swapon be a client rather than stirring for itself.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Donjun Shin <djshin90@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Joern Engel <joern@logfs.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:06 -08:00
Hugh Dickins 858a29900e swapfile: change discard pgoff_t to sector_t
Change pgoff_t nr_blocks in discard_swap() and discard_swap_cluster() to
sector_t: given the constraints on swap offsets (in particular, the 5 bits
of swap type accommodated in the same unsigned long), pgoff_t was actually
safe as is, but it certainly looked worrying when shifted left.

[akpm@linux-foundation.org: fix shift overflow]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Joern Engel <joern@logfs.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Donjun Shin <djshin90@gmail.com>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:06 -08:00
Hugh Dickins c60aa176c6 swapfile: swap allocation cycle if nonrot
Though attempting to find free clusters (Andrea), swap allocation has
always restarted its searches from the beginning of the swap area (sct),
to reduce seek times between swap pages, by not scattering them all over
the partition.

But on a solidstate swap device, seeks are cheap, and block remapping to
level the wear may be limited by zones: in that case it's better to cycle
around the whole partition.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Joern Engel <joern@logfs.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Donjun Shin <djshin90@gmail.com>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:06 -08:00
Hugh Dickins 20137a490f swapfile: swapon randomize if nonrot
Swap allocation has always started from the beginning of the swap area;
but if we're dealing with a solidstate swap device which can only remap
blocks within limited zones, that would sooner wear out the first zone.

Therefore sys_swapon() test whether blk_queue is non-rotational, and if so
randomize the cluster_next starting position for allocation.

If blk_queue is nonrot, note SWP_SOLIDSTATE for later use, and report it
with an "SS" at the right end of the kernel's "Adding ...  swap" message
(so that if it's both nonrot and discardable, "SSD" will be shown there).
Perhaps something should be shown in /proc/swaps (swapon -s), but we have
to be more cautious before making any addition to that format.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Joern Engel <joern@logfs.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Donjun Shin <djshin90@gmail.com>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:05 -08:00