Commit Graph

3 Commits

Author SHA1 Message Date
YueHaibing d4fb30f6f1 tipc: remove unneeded semicolon in trace.c
Remove unneeded semicolon

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17 22:04:43 -08:00
Tuong Lien 01e661ebfb tipc: add trace_events for tipc socket
The commit adds the new trace_events for TIPC socket object:

trace_tipc_sk_create()
trace_tipc_sk_poll()
trace_tipc_sk_sendmsg()
trace_tipc_sk_sendmcast()
trace_tipc_sk_sendstream()
trace_tipc_sk_filter_rcv()
trace_tipc_sk_advance_rx()
trace_tipc_sk_rej_msg()
trace_tipc_sk_drop_msg()
trace_tipc_sk_release()
trace_tipc_sk_shutdown()
trace_tipc_sk_overlimit1()
trace_tipc_sk_overlimit2()

Also, enables the traces for the following cases:
- When user creates a TIPC socket;
- When user calls poll() on TIPC socket;
- When user sends a dgram/mcast/stream message.
- When a message is put into the socket 'sk_receive_queue';
- When a message is released from the socket 'sk_receive_queue';
- When a message is rejected (e.g. due to no port, invalid, etc.);
- When a message is dropped (e.g. due to wrong message type);
- When socket is released;
- When socket is shutdown;
- When socket rcvq's allocation is overlimit (> 90%);
- When socket rcvq + bklq's allocation is overlimit (> 90%);
- When the 'TIPC_ERR_OVERLOAD/2' issue happens;

Note:
a) All the socket traces are designed to be able to trace on a specific
socket by either using the 'event filtering' feature on a known socket
'portid' value or the sysctl file:

/proc/sys/net/tipc/sk_filter

The file determines a 'tuple' for what socket should be traced:

(portid, sock type, name type, name lower, name upper)

where:
+ 'portid' is the socket portid generated at socket creating, can be
found in the trace outputs or the 'tipc socket list' command printouts;
+ 'sock type' is the socket type (1 = SOCK_TREAM, ...);
+ 'name type', 'name lower' and 'name upper' are the service name being
connected to or published by the socket.

Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e.
the traces happen for every sockets with no filter.

b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event
which happens when the socket receive queue (and backlog queue) is
about to be overloaded, when the queue allocation is > 90%. Then, when
the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2
issue can be traced.

The trace event is designed as an 'upper watermark' notification that
the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or
actions can be triggerred in the meanwhile to see what is going on with
the socket queue.

In addition, the 'trace_tipc_sk_dump()' is also placed at the
'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped
for post-analysis.

Acked-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:49:24 -08:00
Tuong Lien b4b9771bcb tipc: enable tracepoints in tipc
As for the sake of debugging/tracing, the commit enables tracepoints in
TIPC along with some general trace_events as shown below. It also
defines some 'tipc_*_dump()' functions that allow to dump TIPC object
data whenever needed, that is, for general debug purposes, ie. not just
for the trace_events.

The following trace_events are now available:

- trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data,
  e.g. message type, user, droppable, skb truesize, cloned skb, etc.

- trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or
  queues, e.g. TIPC link transmq, socket receive queue, etc.

- trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g.
  sk state, sk type, connection type, rmem_alloc, socket queues, etc.

- trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g.
  link state, silent_intv_cnt, gap, bc_gap, link queues, etc.

- trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g.
  node state, active links, capabilities, link entries, etc.

How to use:
Put the trace functions at any places where we want to dump TIPC data
or events.

Note:
a) The dump functions will generate raw data only, that is, to offload
the trace event's processing, it can require a tool or script to parse
the data but this should be simple.

b) The trace_tipc_*_dump() should be reserved for a failure cases only
(e.g. the retransmission failure case) or where we do not expect to
happen too often, then we can consider enabling these events by default
since they will almost not take any effects under normal conditions,
but once the rare condition or failure occurs, we get the dumped data
fully for post-analysis.

For other trace purposes, we can reuse these trace classes as template
but different events.

c) A trace_event is only effective when we enable it. To enable the
TIPC trace_events, echo 1 to 'enable' files in the events/tipc/
directory in the 'debugfs' file system. Normally, they are located at:

/sys/kernel/debug/tracing/events/tipc/

For example:

To enable the tipc_link_dump event:

echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable

To enable all the TIPC trace_events:

echo 1 > /sys/kernel/debug/tracing/events/tipc/enable

To collect the trace data:

cat trace

or

cat trace_pipe > /trace.out &

To disable all the TIPC trace_events:

echo 0 > /sys/kernel/debug/tracing/events/tipc/enable

To clear the trace buffer:

echo > trace

d) Like the other trace_events, the feature like 'filter' or 'trigger'
is also usable for the tipc trace_events.
For more details, have a look at:

Documentation/trace/ftrace.txt

MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc

Acked-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:49:24 -08:00