Add code to handle DRAM ECC errors decoding for Fam16h.
Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the
memory controller is csrows based. Merge both fields into one.
There's no need for the driver to actually fill it, as the core detects
it by checking if one of the layers has the csrows type as part of the
memory hierarchy:
if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT)
per_rank = true;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
We were filling the csrow size with a wrong value. 16a528ee39 ("EDAC:
Fix csrow size reported in sysfs") tried to address the issue. It fixed
the report with the old API but not with the new one. Correct it for the
new API too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[ make it a per-csrow accounting regardless of ->channel_count ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
"For:
- Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
- error injection support for i5100, when EDAC debug is enabled;
- fix edac when it is loaded builtin (early init for the subsystem);
- a "Firmware First" EDAC driver, allowing ghes to report errors via
EDAC (ghes-edac).
With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
i7core_edac or sb_edac are running, the error reports are
unpredictable, as both BIOS and OS race to access the registers. With
ghes-edac, the EDAC core will refuse to register any other concurrent
memory error driver.
This patchset moves the ghes struct definitions to a separate header
file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
register/unregister and to report errors via ghes-edac. Those changes
were acked by ghes driver maintainer (Huang)."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
i5100_edac: convert to use simple_open()
ghes_edac: fix to use list_for_each_entry_safe() when delete list items
ghes_edac: Fix RAS tracing
ghes_edac: Make it compliant with UEFI spec 2.3.1
ghes_edac: Improve driver's printk messages
ghes_edac: Don't credit the same memory dimm twice
ghes_edac: do a better job of filling EDAC DIMM info
ghes_edac: add support for reporting errors via EDAC
ghes_edac: Register at EDAC core the BIOS report
ghes: add the needed hooks for EDAC error report
ghes: move structures/enum to a header file
edac: add support for error type "Info"
edac: add support for raw error reports
edac: reduce stack pressure by using a pre-allocated buffer
edac: lock module owner to avoid error report conflicts
edac: remove proc_name from mci structure
edac: add a new memory layer type
edac: initialize the core earlier
edac: better report error conditions in debug mode
i5100_edac: Remove two checkpatch warnings
...
This removes an open coded simple_open() function and
replaces file operations references to the function
with simple_open() instead.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since we will remove items off the list using list_del() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
With the current version of CPER, there's no way to associate an
error with the memory error. So, the error location in EDAC
layers is unused.
As CPER has its own idea about memory architectural layers, just
output whatever is there inside the driver's detail at the RAS
tracepoint.
The EDAC location keeps untouched, in the case that, in some future,
we could actually map the error into the dimm labels.
Now, the error message:
[ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[ 72.396627] {1}[Hardware Error]: APEI generic hardware error status
[ 72.396628] {1}[Hardware Error]: severity: 2, corrected
[ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected
[ 72.396632] {1}[Hardware Error]: flags: 0x01
[ 72.396634] {1}[Hardware Error]: primary
[ 72.396635] {1}[Hardware Error]: section_type: memory error
[ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400
[ 72.396638] {1}[Hardware Error]: node: 3
[ 72.396639] {1}[Hardware Error]: card: 0
[ 72.396640] {1}[Hardware Error]: module: 0
[ 72.396641] {1}[Hardware Error]: device: 0
[ 72.396643] {1}[Hardware Error]: error_type: 18, unknown
[ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory)
Is properly represented on the trace event:
kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location👎-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory)
Tested on a 4 sockets E5-4650 Sandy Bridge machine.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Provide a better infrastructure for printk's inside the driver:
- use edac_dbg() for debug messages;
- standardize the usage of pr_info();
- provide warning about the risk of relying on this
driver.
While here, changes the size of a fake memory to 1 page. This is
as good or as bad as 1000 pages, but it is easier for userspace to
detect, as I don't expect that any machine implementing GHES would
provide just 1 page available ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Conflicts:
drivers/edac/ghes_edac.c
Instead of just faking a random value for the DIMM data, get
the information that it is available via DMI table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that the EDAC core is capable of just forward the errors via
the userspace API, add a report mechanism for the GHES errors.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Register GHES at EDAC MC core, in order to avoid other
drivers to also handle errors and mangle with error data.
The edac core will warrant that just one driver will be used,
so the first one to register (BIOS first) will be the one that
will be reporting the hardware errors.
For now, the EDAC driver does nothing but to register at the
EDAC core, preventing the hardware-driven mechanism to
interfere with GHES.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
The number of variables at the stack is too big.
Reduces the stack usage by using a pre-allocated error
buffer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
APEI GHES and i7core_edac/sb_edac currently can be loaded at
the same time, but those are Highlander modules:
"There can be only one".
There are two reasons for that:
1) Each driver assumes that it is the only one registering at
the EDAC core, as it is driver's responsibility to number
the memory controllers, and all of them start from 0;
2) If BIOS is handling the memory errors, the OS can't also be
doing it, as one will mangle with the other.
So, we need to add an module owner's lock at the EDAC core,
in order to avoid having two different modules handling memory
errors at the same time. The best way for doing this lock seems
to use the driver's name, as this is unique, and won't require
changes on every driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are some cases where the memory controller layout is
completely hidden. This is the case of firmware-driven error
code, like the one provided by GHES. Add a new layer to be
used on such memory error report mechanisms.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In order for it to work with it builtin, the EDAC core should
be initialized earlier, otherwise the ghes_edac driver initializes
before edac_mc_sysfs_init() being called:
...
[ 4.998373] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
...
[ 4.998373] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
[ 6.519495] EDAC MC: Ver: 3.0.0
[ 6.523749] EDAC DEBUG: edac_mc_sysfs_init: device mc created
The net result is that no EDAC sysfs nodes will appear.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The last changeset introduced a few checkpatch warnings:
WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
261: FILE: drivers/edac/i5100_edac.c:1207:
+ if (priv->debugfs)
+ debugfs_remove_recursive(priv->debugfs);
WARNING: debugfs_remove(NULL) is safe this check is probably not required
290: FILE: drivers/edac/i5100_edac.c:1250:
+ if (i5100_debugfs)
+ debugfs_remove(i5100_debugfs);
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Create a debugfs direcotry i5100_edac/mcX for each memory controller and
add nodes to control how fault injection is preformed.
After configuring an injection using inject_channel, inject_deviceptr1,
inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel
trigger the injection by writing anything to inject_enable.
Example of a CE injection:
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable
Example of UE injection:
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2
echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable
Sometimes it is needed to enable the injection more then once (echo to
the inject_enable node) for the injection to happen, I am not sure why.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add fault injection based on information datasheet for i5100, see 1. In
addition to the i5100 datasheet some missing information on injection
functions where found through experimentation and the i7300 datasheet,
see 2.
[1] Intel 5100 Memory Controller Hub Chipset
Doc.Nr: 318378
http://www.intel.com/content/dam/doc/datasheet/5100-
memory-controller-hub-chipset-datasheet.pdf
[2] Intel 7300 Chipset MemoryController Hub (MCH)
Doc.Nr: 318082
http://www.intel.com/assets/pdf/datasheet/318082.pdf
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Probe and store the device handle for the device 19 function 0 during
driver initialization. The device is used during fault injection.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, sdram_scrub_rate sysfs node is created even if the device
doesn't support get/set the scub rate. Change the logic to only
create this device node when the operation is supported.
Reported-by: Felipe Balbi <balbi@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After running a series of tests on an HP DL320, filled with different
memory sizes, it was noticed that, when filled with just one DIMM
on such hardware, the driver wrongly detects twice the memory, and
thinks that both channels 0 and 1 are filled.
It seems to be partially caused by the BIOS and partially by the driver.
The i3200_edac current logic would be working fine if the BIOS were
disabling the unused second channel when just one DIMM is connected,
in order to do power-saving, as recommended on this chipset's datasheet.
However, the BIOS on this particular machine doesn't do it:
[ 16.741421] EDAC DEBUG: how_many_channels: In dual channel mode
[ 16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled
So, the driver were assuming that 2 channels are enabled (well, they are,
but the second is unused).
Combined with that, I found two issues at the logic that creates the
EDAC data, that were failing when the two channels are not equally
filled (AFAICT, that happens only when just 1 DIMM is plugged).
The first one is that a 0 at DRB means that nothing is filled. The
driver's logic, however, do some calculation with that.
The second one is that the logic that fills the DIMM data currently
assumes that both channels are equally filled.
I tested the system already with the current configuration and my
patch and it is now working fine. So, for a 2R single DIMM 2Gb memory
at dimm slot 01 (channel 0), it is now displaying:
[ 16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0
[ 16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0
[ 16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0
[ 16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0
...
[ 16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb
[ 16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb
and the corresponding sysfs nodes are now properly filled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, it is not possible to know, when debug is enabled,
if the driver is using 2 DIMMS per channel mode or not. It is
not possible to know the values of the drbs registers, used
to identify the memory rank sizes.
Add debug for both, as it helps to track issues on the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Only one: AMD F16h MCE decoding enablement from Jacob Shin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=LbcU
-----END PGP SIGNATURE-----
Merge tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"Mostly AMD's side of EDAC. It is basically a new family enablement
stuff: AMD F16h MCE decoding enablement from Jacob Shin. The rest is
trivial cleanups."
* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
mpc85xx_edac: Fix typo
EDAC, MCE, AMD: Remove unneeded exports
EDAC, MCE, AMD: Add MCE decoding support for Family 16h
EDAC, MCE, AMD: Make MC2 decoding per-family
amd64_edac: Remove dead code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
=jjBc
-----END PGP SIGNATURE-----
Merge tag 'v3.8-rc7' into next
Linux 3.8-rc7
* tag 'v3.8-rc7': (12052 commits)
Linux 3.8-rc7
net: sctp: sctp_endpoint_free: zero out secret key data
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
atm/iphase: rename fregt_t -> ffreg_t
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
net: usb: fix regression from FLAG_NOARP code
l2tp: dont play with skb->truesize
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
netback: correct netbk_tx_err to handle wrap around.
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
xen/netback: shutdown the ring if it contains garbage.
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
virtio_console: Don't access uninitialized data.
net: qmi_wwan: add more Huawei devices, including E320
net: cdc_ncm: add another Huawei vendor specific device
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
...
Pull x86 platform changes from Ingo Molnar:
- Support for the Technologic Systems TS-5500 platform, by Vivien
Didelot
- Improved NUMA support on AMD systems:
Add support for federated systems where multiple memory controllers
can exist and see each other over multiple PCI domains. This
basically means that AMD node ids can be more than 8 now and the code
handling this is taught to incorporate PCI domain into those IDs.
- Support for the Goldfish virtual Android emulator, by Jun Nakajima,
Intel, Google, et al.
- Misc fixlets.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Add TS-5500 platform support
x86/srat: Simplify memory affinity init error handling
x86/apb/timer: Remove unnecessary "if"
goldfish: platform device for x86
amd64_edac: Fix type usage in NB IDs and memory ranges
amd64_edac: Fix PCI function lookup
x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
x86, AMD, NB: Add multi-domain support
Initially, those strings describing different parts of an MCE message
were shared with amd64_edac and were therefore exported to modules.
However, all except pp_msgs are used only in one place right now so hide
them and make them static.
No functionality change.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Add MCE decoding logic for AMD Family 16h processors.
Boris:
- drop unneeded uu_msgs export
- exit early in cat_mc1_mce and save us an indentation level
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Currently only AMD Family 15h processors have special handling for MC2
errors. Since upcoming Family 16h will also need unique handling, let's
make MC2 handling part of amd_decoder_ops.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
5e2af0c09e ("edac: Don't initialize csrow's first_page & friends when
not needed") removed useless initialization of variables but left in the
functions which did that. They're unused now so drop them.
Signed-off-by: Borislav Petkov <bp@alien8.de>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Fix locating sibling memory controller PCI functions by using the
correct PCI domain and use a northbridge descriptor only if found. We
need to at least warn if it wasn't found so that it gets fixed and we
don't go off with wrong results.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-1-git-send-email-daniel@numascale-asia.com
[Boris: remove wrong comment, sanitize code and warn if NB desc lookup fails]
Signed-off-by: Borislav Petkov <bp@alien8.de>
Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov <bp@alien8.de>
which spilled all EDAC suboptions into the 'Device Drivers' menu.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJQ7D0jAAoJEBLB8Bhh3lVKtcgP/3uzBjETQ7KzKG9R+zHxkBom
7pl6UYqgquqpoqP3tGsn0+oaVyEvY3D11NMp/vhGxUjqJjDnIE3T/TvBMIwaRaq1
/bPrZ+hE5d2mHWP/TULEVVYMziHhR9UO1SpB+E7vX7FqKcLwzeiS7CMlm4qjq0qC
duXCG/6gyEKIecT3KPuXFzpojV6pSpSIYvLu03hdS3e8w7Wb6jvomWV282TpaSim
aFyL909M/f4kexWD0827VnBxogwBWPl1hIGfFVprYGrabgUTtfb/OFhnZut8U1FV
giDtDgIC7nATp1LzTK+fPE5kx9yZvrE1SV8ZTNF6r0dYH14fnR3YgbQqbVgbLUYF
icQqCHpyZKD+s/ajymq8lg+ltVtROqCLWdT6YFZlaBlObP0sYltpSj1JRcoC5O6c
Lx252LQQmxMQZKGnNlBooI6QN73GXlsngTgHD9z3DpFgvRilhA8EmbK2ZFFesdkk
R4s25yH8fno6ClhxlwyA3+0vwU9B19Ul00cx4/5ZXPdK56Fq7slM/ORTE5SQFrHH
6QG/pYDz09WXhKvOtX4ZRh2bBudMsY7mgsrxFelGYtsqHikLtYVUzkkyFkccjZMj
UWcHUHsdSx+gr4DK/jclW1tDgwzh2G17d3FJobujGSgJJIqM2qOo/izON/g4+ojA
RlKqYTCkAh3fX6DZX1vX
=Qh4Y
-----END PGP SIGNATURE-----
Merge tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two error path fixes causing a crash and a Kconfig fix for an issue
which spilled all EDAC suboptions into the 'Device Drivers' menu."
* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Cleanup device deregistering path
EDAC: Fix EDAC Kconfig menu
EDAC: Fix kernel panic on module unloading
Use device_unregister to replace put_device + device_del for
cleanup, and fix the potential use after free.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
After f65aad41772f("MIPS: Cavium: Add EDAC support."), when entering
the "Device Drivers" toplevel menu in menuconfig, the suboptions behind
EDAC appeared merged with the rest of the device drivers types. This was
because the menuconfig option EDAC is querying an EDAC_SUPPORT Kconfig
bool which was defined after the menu definition.
When pushing EDAC_SUPPORT up, before the menu definition, the variable
is defined earlier and the above menuconfig artifact doesn't happen.
Drop a useless menuconfig comment while at it.
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
This patch fixes use-after-free and double-free bugs in
edac_mc_sysfs_exit(). mci_pdev has single reference and put_device()
calls mc_attr_release() which calls kfree(). The following
device_del() works with already released memory. An another kfree() in
edac_mc_sysfs_exit() releses the same memory again. Great.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: stable@vger.kernel.org # 3.[67]
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg
Signed-off-by: Borislav Petkov <bp@alien8.de>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove size from lookup arrays and mark them as const.
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are no more embedded kobjects in struct mem_ctl_info. Remove a header and
a comment that does not reflect the code anymore.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull MIPS updates from Ralf Baechle:
"The MIPS bits for 3.8. This also includes a bunch fixes that were
sitting in the linux-mips.org git tree for a long time. This pull
request contains updates to several OCTEON drivers and the board
support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
updates to the SSB bus support, MIPS kexec code and adds support for
kdump.
When pulling this, there are two expected merge conflicts in
include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
resolve, just remove the conflict markers and keep both alternatives."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
MIPS: PMC-Sierra Yosemite: Remove support.
VIDEO: Newport Fix console crashes
MIPS: wrppmc: Fix build of PCI code.
MIPS: IP22/IP28: Fix build of EISA code.
MIPS: RB532: Fix build of prom code.
MIPS: PowerTV: Fix build.
MIPS: IP27: Correct fucked grammar in ops-bridge.c
MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
MIPS: Fix potencial corruption
MIPS: Fix for warning from FPU emulation code
MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
MIPS: Remove unused smvp.h
MIPS/EDAC: Improve OCTEON EDAC support.
MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
MIPS: Remove usage of CEVT_R4K_LIB config option.
...
Some initialization errors are reported with the existing OCTEON EDAC
support patch. Also some parts have more than one memory controller.
Fix the errors and add multiple controllers if present.
Signed-off-by: David Daney <david.daney@cavium.com>
Drivers for EDAC on Cavium. Supported subsystems are:
o CPU primary caches. These are parity protected only, so only error
reporting.
o Second level cache - ECC protected, provides SECDED.
o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will
will only initialize if ECC is enabled on a system so is safe to run on
non-ECC memory.
o PCI: Parity error reporting
Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Pull EDAC fixes from Borislav Petkov:
- EDAC core error path fix, from Denis Kirjanov.
- Generalization of AMD MCE bank names and some minor error reporting
improvements.
- EDAC core cleanups and simplifications, from Wei Yongjun.
- amd64_edac fixes for sysfs-reported values, from Josh Hunt.
- some heavy amd64_edac error reporting path shaving, leading to
removing a bunch of code.
- amd64_edac error injection method improvements.
- EDAC core cleanups and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (24 commits)
EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
EDAC: Handle error path in edac_mc_sysfs_init() properly
MCE, AMD: Dump error status
MCE, AMD: Report decoded error type first
MCE, AMD: Dump CPU f/m/s triple with the error
MCE, AMD: Remove functional unit references
EDAC: Convert to use simple_open()
EDAC, Calxeda highbank: Convert to use simple_open()
EDAC: Fix mc size reported in sysfs
EDAC: Fix csrow size reported in sysfs
EDAC: Pass mci parent
EDAC: Add memory controller flags
amd64_edac: Fix csrows size and pages computation
amd64_edac: Use DBAM_DIMM macro
amd64_edac: Fix K8 chip select reporting
amd64_edac: Reorganize error reporting path
amd64_edac: Do not check whether error address is valid
amd64_edac: Improve error injection
amd64_edac: Cleanup error injection code
amd64_edac: Small fixlets and cleanups
...
Use for_each_pci_dev to simplify the code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Boris: cleanup comments and drop loop brackets]
Signed-off-by: Borislav Petkov <bp@alien8.de>
It is very useful to have the family/model/stepping with the reported
error so dump it. This saves us asking the bug reporter about it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Having the functional unit names in each bank decode is only misleading
as this code supports multiple families and there's no guarantee the
mapping between FUs and MCE banks will stay the same.
And also, knowing the functional unit name doesn't help much since you
end up looking at the respective BKDG anyway.
So drop all FU references and use the MC bank numbers instead.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This is the complement to previous commit "EDAC: Fix csrow size
reported in sysfs". This fixes the memory controller size reporting on
csrow-based memory controllers. The csrow size is already combined for
both channels. Without this patch memory size is reported doubled.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.
Fix it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This basically reverts 603adaf6b3 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfaba7
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.
Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
All families report a valid error address when encountering a DRAM ECC
error so no need to check it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
A reported error could look like this
[ 226.178315] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6)
with two spaces back-to-back due to the msg argument of
edac_mc_handle_error being passed on empty by the specific drivers.
Handle that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The tracepoint decodes the error type later anyway so remove a useless
assignment to the temporary p which gets overwritten later anyway.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Only levels [0:4] are allowed so enforce that. Also, while at it,
massage Kconfig text and add valid debug levels range to the module
parameter description.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Currently, we unconditionally enable PCI polling and we don't look at
the edac_op_state module parameter. Make this dependent on the parameter
setting supplied on the command line.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files
associated with them. The sysfs files, however, are coded so that the
parent device is is the mci device. This is incorrect and the mci struct
should be obtained through the addrmatch_dev and chancounts_dev device's
private data field which is populated in i7core_create_sysfs_devices().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
register FERR_NF_FBD. We were lucky they have the same definition.
This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver is currently filling data in a wrong way, on drivers
for csrows-based memory controller, when the first layer is a
csrow.
This is not easily to notice, as, in general, memories are
filed in dual, interleaved, symetric mode, as very few memory
controllers support asymetric modes.
While digging into a bug for i82795_edac driver, the asymetric
mode there is now working, allowing us to fill the machine with
4x1GB ranks at channel 0, and 2x512GB at channel 1:
Channel 0 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages)
Channel 1 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages)
Instead of properly showing the memories as such, before this patch, it
shows the memory layout as:
+-----------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 |
----------+-----------------------------------+
channel1: | 1024 MB | 1024 MB | 512 MB |
channel0: | 1024 MB | 1024 MB | 512 MB |
----------+-----------------------------------+
as if both channels were symetric, grouping the DIMMs on a wrong
layout.
After this patch, the memory is correctly represented.
So, for csrows at layers[0], it shows:
+-----------------------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 | csrow3 |
----------+-----------------------------------------------+
channel1: | 512 MB | 512 MB | 0 MB | 0 MB |
channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
----------+-----------------------------------------------+
For csrows at layers[1], it shows:
+-----------------------+
| mc0 |
| channel0 | channel1 |
--------+-----------------------+
csrow3: | 1024 MB | 0 MB |
csrow2: | 1024 MB | 0 MB |
--------+-----------------------+
csrow1: | 1024 MB | 512 MB |
csrow0: | 1024 MB | 512 MB |
--------+-----------------------+
So, no matter of what comes first, the information between
channel and csrow will be properly represented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.
As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.
Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2
It will be rewritten more robustly soonish.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Cc: stable@vger.kernel.org
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Pull powerpc updates from Benjamin Herrenschmidt:
"Some highlights in addition to the usual batch of fixes:
- 64TB address space support for 64-bit processes by Aneesh Kumar
- Gavin Shan did a major cleanup & re-organization of our EEH support
code (IBM fancy PCI error handling & recovery infrastructure) which
paves the way for supporting different platform backends, along
with some rework of the PCIe code for the PowerNV platform in order
to remove home made resource allocations and instead use the
generic code (which is possible after some small improvements to it
done by Gavin).
- Uprobes support by Ananth N Mavinakayanahalli
- A pile of embedded updates from Freescale folks, including new SoC
and board supports, more KVM stuff including preparing for 64-bit
BookE KVM support, ePAPR 1.1 updates, etc..."
Fixup trivial conflicts in drivers/scsi/ipr.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
powerpc/iommu: Fix multiple issues with IOMMU pools code
powerpc: Fix VMX fix for memcpy case
driver/mtd:IFC NAND:Initialise internal SRAM before any write
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
powerpc: Remove tlb batching hack for nighthawk
powerpc: Set paca->data_offset = 0 for boot cpu
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
powerpc/mpc85xx: Update interrupt handling for IFC controller
powerpc/85xx: Enable USB support in p1023rds_defconfig
powerpc/smp: Do not disable IPI interrupts during suspend
powerpc/eeh: Fix crash on converting OF node to edev
powerpc/eeh: Lock module while handling EEH event
powerpc/kprobe: Don't emulate store when kprobe stwu r1
powerpc/kprobe: Complete kprobe and migrate exception frame
powerpc/kprobe: Introduce a new thread flag
powerpc: Remove unused __get_user64() and __put_user64()
powerpc/eeh: Global mutex to protect PE tree
powerpc/eeh: Remove EEH PE for normal PCI hotplug
...
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.
Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info. Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().
Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().
The BUG this patch resolves for me:
BUG: unable to handle kernel NULL pointer dereference at (null)
EIP is at __wake_up_common+0x1a/0x6a
Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
Call Trace:
complete_all+0x3f/0x50
device_pm_remove+0x23/0xa2
device_del+0x34/0x142
edac_unregister_sysfs+0x3b/0x5c [edac_core]
edac_mc_free+0x29/0x2f [edac_core]
e7xxx_probe1+0x268/0x311 [e7xxx_edac]
e7xxx_init_one+0x56/0x61 [e7xxx_edac]
local_pci_probe+0x13/0x15
...
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
coccinelle warns about:
+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
421 if (mci->csrows) {
> 422 for (chn = 0; chn < tot_channels; chn++) {
423 csr = mci->csrows[chn];
424 if (csr) {
> 425 for (chn = 0; chn < tot_channels; chn++)
426 kfree(csr->channels[chn]);
427 kfree(csr);
428 }
> 429 kfree(mci->csrows[i]);
430 }
431 kfree(mci->csrows);
432 }
and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):
L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
"row" and "tot_csrows" respectively. Which means either memory leak, or
out-of-bound reads (which if does not trigger an immediate page fault
error, will further lead to kfree() on random addresses).
L425: The inner loop is reusing the same iterator "chn" as the outer loop,
which could lead to premature end of the outer loop, and hence memory leak.
L429: The array index 'i' in mci->csrows[i] is a temporary value used in
previous loops, and won't change at all in the current loop. Which
means either out-of-bound read and possibly kfree(random number), or the
same mci->csrows[i] get freed once and again, and possibly double free
for the kfree(csr) in L427.
L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
The buggy code was introduced by commit de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:
free csrows[i]->channels[j]
free csrows[i]->channels
free csrows[i]
free csrows
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We unified the Freescale pci/pcie initialization by changing the fsl_pci
to a platform driver. In previous PCI code architecture the initialization
routine is called at board_setup_arch stage. Now the initialization is done
in probe function which is architectural better. Also It's convenient for
adding PM support for PCI controller in later patch.
Now we registered pci controllers as platform devices. So we combine two
initialization code as one platform driver.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().
Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.
* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.
* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().
* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.
v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
* devel: (33 commits)
edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
edac: allow specifying the error count with fake_inject
edac: add support for Calxeda highbank L2 cache ecc
edac: add support for Calxeda highbank memory controller
edac: create top-level debugfs directory
sb_edac: properly handle error count
i7core_edac: properly handle error count
edac: edac_mc_handle_error(): add an error_count parameter
edac: remove arch-specific parameter for the error handler
amd64_edac: Don't pass driver name as an error parameter
edac_mc: check for allocation failure in edac_mc_alloc()
edac: Increase version to 3.0.0
edac_mc: Cleanup per-dimm_info debug messages
edac: Convert debugfX to edac_dbg(X,
edac: Use more normal debugging macro style
edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
Edac: Add ABI Documentation for the new device nodes
edac: move documentation ABI to ABI/testing/sysfs-devices-edac
i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
edac: change the mem allocation scheme to make Documentation/kobject.txt happy
...
"pvt->ambase" is a u64 datatype. The intent here is to fill the first
half in the first call to pci_read_config_dword() and the other half in
the second. Unfortunately the pointer math is wrong so we set the wrong
data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab
Aravind Gopalakrishnan
Borislav Petkov
Stephen Hemminger
Linus Torvalds
Wei Yongjun
Niklas Söderlund
Baruch Siach
Joe Perches
Dan Carpenter
Borislav Petkov
Jacob Shin
Kees Cook
Daniel J Blueman
Lans Zhang
Konstantin Khlebnikov
Greg Kroah-Hartman
Lans Zhang
Niklas Söderlund
Shaun Ruffell
David Daney
Ralf Baechle
Denis Kirjanov
Borislav Petkov
Josh Hunt
Prarit Bhargava
Jean Delvare
Andrew Morton
Fengguang Wu
Jia Hongtao
Tejun Heo