To enable the linux-kernel system to load the hns-roce-hw-v2 driver
automatically when hns-roce-hw-v2 is plugged in pci bus, it need to
create a MODULE_DEVICE_TABLE for expose the pci_table of
hns-roce-hw-v2 to user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reported-by: Zhou Wang <wangzhou1@hisilicon.com>
Tested-by: Xiaojun Tan <tanxiaojun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When used rq record db for kernel, it needs to set the rdb_en of
hr_qp to 1 and configures the dma address of record rq db of qp
context.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It needs to set the rqie field of qp context by configured rq inline
flags. Besides, it need to decide whether posting inline rqwqe by
judged rq inline flags.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use of incorrect structure address for IPv6 neighbor lookup
causes connections to IPv6 addresses to fail. Fix this by
using correct address in call to dst_neigh_lookup.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If i40iw_allocate_dma_mem fails when creating a QP, the
memory allocated for the QP structure using kzalloc is not
freed because iwqp->allocated_buffer is used to free the
memory and it is not setup until later. Fix this by setting
iwqp->allocated_buffer before allocating the dma memory.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Flow label is defined as u32 in the in ipv6 flow spec, but
used internally in the flow specs parsing as u8. That was
causing loss of part of flow_label value.
Fixes: 2d1e697e9b ('IB/mlx5: Add support to match inner packet fields')
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
User can leave system without medium BlueFlames registers,
however the code assumed that at least one such register exists.
This patch fixes that assumption.
Fixes: c1be5232d2 ("IB/mlx5: Fix micro UAR allocator")
Reported-by: Rohit Zambre <rzambre@uci.edu>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A pio send egress error can occur when the PSM library attempts to
to send a bad packet. That issue is still being investigated.
The pio error interrupt handler then attempts to progress the recovery
of the errored pio send context.
Code inspection reveals that the handling lacks the necessary locking
if that recovery interleaves with a PSM close of the "context" object
contains the pio send context.
The lack of the locking can cause the recovery to access the already
freed pio send context object and incorrectly deduce that the pio
send context is actually a kernel pio send context as shown by the
NULL deref stack below:
[<ffffffff8143d78c>] _dev_info+0x6c/0x90
[<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1]
[<ffffffff816ab124>] ? __schedule+0x424/0x9b0
[<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1]
[<ffffffff810aa3ba>] process_one_work+0x17a/0x440
[<ffffffff810ab086>] worker_thread+0x126/0x3c0
[<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0
[<ffffffff810b252f>] kthread+0xcf/0xe0
[<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
[<ffffffff816b8798>] ret_from_fork+0x58/0x90
[<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
This is the best case scenario and other scenarios can corrupt the
already freed memory.
Fix by adding the necessary locking in the pio send context error
handler.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for
options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND.
Remove the unnecessary INFINIBAND depends.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)
-----BEGIN PGP SIGNATURE-----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=PI8v
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is our first pull request of the rc cycle. It's not that it's
been overly quiet, we were just waiting on a few things before sending
this off.
For instance, the 6 patch series from Intel for the hfi1 driver had
actually been pulled in on Tuesday for a Wednesday pull request, only
to have Jason notice something I missed, so we held off for some
testing, and then on Thursday had to respin the series because the
very first patch needed a minor fix (unnecessary cast is all).
There is a sizable hns patch series in here, as well as a reasonably
largish hfi1 patch series, then all of the lines of uapi updates are
just the change to the new official Linux-OpenIB SPDX tag (a bunch of
our files had what amounts to a BSD-2-Clause + MIT Warranty statement
as their license as a result of the initial code submission years ago,
and the SPDX folks decided it was unique enough to warrant a unique
tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4
and core/cache/cma updates to round out the bunch.
None of it was overly large by itself, but in the 2 1/2 weeks we've
been collecting patches, it has added up :-/.
As best I can tell, it's been through 0day (I got a notice about my
last for-next push, but not for my for-rc push, but Jason seems to
think that failure messages are prioritized and success messages not
so much). It's also been through linux-next. And yes, we did notice in
the context portion of the CMA query gid fix patch that there is a
dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage
and remove it anywhere we can.
Summary:
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits)
RDMA/cma: Do not query GID during QP state transition to RTR
IB/mlx4: Fix integer overflow when calculating optimal MTT size
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
IB/hfi1: Fix loss of BECN with AHG
IB/hfi1 Use correct type for num_user_context
IB/hfi1: Fix handling of FECN marked multicast packet
IB/core: Make ib_mad_client_id atomic
iw_cxgb4: Atomically flush per QP HW CQEs
IB/uverbs: Fix kernel crash during MR deregistration flow
IB/uverbs: Prevent reregistration of DM_MR to regular MR
RDMA/mlx4: Add missed RSS hash inner header flag
RDMA/hns: Fix a couple misspellings
RDMA/hns: Submit bad wr
RDMA/hns: Update assignment method for owner field of send wqe
RDMA/hns: Adjust the order of cleanup hem table
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
RDMA/hns: Remove some unnecessary attr_mask judgement
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
...
Provide a cxgb4-specific function to fill in qp state details.
This allows dumping important c4iw_qp state useful for debugging.
Included in the dump are the t4_sq, t4_rq structs, plus a dump
of the t4_swsqe and t4swrqe descriptors for the first and last
pending entries.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These help rdma drivers to fill out the driver entries.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Each driver can register a "fill entry" function with the restrack core.
This function will be called when filling out a resource, allowing the
driver to add driver-specific details. The details consist of a
nltable of nested attributes, that are in the form of <key, [print-type],
value> tuples. Both key and value attributes are mandatory. The key
nlattr must be a string, and the value nlattr can be one of the driver
attributes that are generic, but typed, allowing the attributes to be
validated. Currently the driver nlattr types include string, s32,
u32, s64, and u64. The print-type nlattr allows a driver to specify
an alternative display format for user tools displaying the attribute.
For example, a u32 attribute will default to "%u", but a print-type
attribute can be included for it to be displayed in hex. This allows
the user tool to print the number in the format desired by the driver
driver.
More attrs can be defined as they become needed by drivers.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a specific RDMA_NLDEV_ATTR_PAD attribute to be used for 64b
attribute padding. To preserve the ABI, make this attribute equal to
RDMA_NLDEV_ATTR_UNSPEC, which has a value of 0, because that has been
used up until now as the pad attribute.
Change all the previous use of 0 as the pad with this
new enum.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When commit [1] was added, SGID was queried to derive the SMAC address.
Then, later on during a refactor [2], SMAC was no longer needed. However,
the now useless GID query remained. Then during additional code changes
later on, the GID query was being done in such a way that it caused iWARP
queries to start breaking. Remove the useless GID query and resolve the
iWARP breakage at the same time.
This is discussed in [3].
[1] commit dd5f03beb4 ("IB/core: Ethernet L2 attributes in verbs/cm structures")
[2] commit 5c266b2304 ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av")
[3] https://www.spinics.net/lists/linux-rdma/msg63951.html
Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the kernel was compiled using the UBSAN option,
we saw the following stack trace:
[ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27
[ 1184.828114] signed integer overflow:
[ 1184.828247] -2147483648 - 1 cannot be represented in type 'int'
The problem was caused by calling round_up in procedure
mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack
trace) with the second parameter (1 << block_shift) (which is an int).
The second parameter should have been (1ULL << block_shift) (which
is an unsigned long long).
(1 << block_shift) is treated by the compiler as an int (because 1 is
an integer).
Now, local variable block_shift is initialized to 31.
If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368.
This is the most negative int value.
Inside the round_up macro, there is a cast applied to ((1 << 31) - 1).
However, this cast is applied AFTER ((1 << 31) - 1) is calculated.
Since (1 << 31) is treated as an int, we get the negative overflow
identified by UBSAN in the process of calculating ((1 << 31) - 1).
The fix is to change (1 << block_shift) to (1ULL << block_shift) on
line 349.
Fixes: 9901abf583 ("IB/mlx4: Use optimal numbers of MTT entries")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When allocating device data, if there's an allocation failure, the
already allocated memory won't be freed such as per-cpu counters.
Fix memory leaks in exception path by creating a common reentrant
clean up function hfi1_clean_devdata() to be used at driver unload
time and device data allocation failure.
To accomplish this, free_platform_config() and clean_up_i2c() are
changed to be reentrant to remove dependencies when they are called
in different order. This helps avoid NULL pointer dereferences
introduced by this patch if those two functions weren't reentrant.
In addition, set dd->int_counter, dd->rcv_limit,
dd->send_schedule and dd->tx_opstats to NULL after they're freed in
hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.
Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.
BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
dev_err+0x6c/0x90
? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
hfi1_init_dd+0xdd/0x2530 [hfi1]
? pci_conf1_read+0xb2/0xf0
? pci_read_config_word.part.9+0x64/0x80
? pci_conf1_write+0xb0/0xf0
? pcie_capability_clear_and_set_word+0x57/0x80
init_one+0x141/0x490 [hfi1]
local_pci_probe+0x3f/0xa0
work_for_cpu_fn+0x10/0x20
process_one_work+0x152/0x350
worker_thread+0x1cf/0x3e0
kthread+0xf5/0x130
? max_active_store+0x80/0x80
? kthread_bind+0x10/0x10
? do_syscall_64+0x6e/0x1a0
? SyS_exit_group+0x10/0x10
ret_from_fork+0x35/0x40
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).
When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.
Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor. BECNs are not a normal case and this should not
hurt AHG optimizations.
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The module parameter num_user_context is defined as 'int' and
defaults to -1. The module_param_named() says that it is uint.
Correct module_param_named() type information and update the modinfo
text to reflect the default value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet. This is not correct
for multicast packets where the DLID is in the multicast range.
The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming. The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.
A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys. Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.
Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 88733e3b84 ("IB/hfi1: Add 16B UD support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in DP_ERR error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the recently introduced helper to replace the pattern of
skb_put_zero/__skb_put() && memset().
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the kernel protects access to the agent ID allocator on a per
port basis using a spinlock, so it is impossible for two apps/threads on
the same port to get the same TID, but it is entirely possible for two
threads on different ports to end up with the same TID.
As this can be confusing (regardless of it being legal according to the
IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage),
and as the rdma-core user space API for /dev/umad devices implies unique
TIDs even across ports, make the TID an atomic type so that no two
allocations, regardless of port number, will be the same.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch is meant to clean up how the opa_vnic is obtaining entropy from
Tx packets.
The code as it was written was claiming to get 16 bits of hash, but from
what I can tell it was only ever actually getting 14 bits as it was limited
to 0 - (2^15 - 1). It then was folding the result to get a 8 bit value for
entropy.
Instead of throwing away all that input I am cutting out the middle man and
instead having the code call skb_get_hash directly and then folding the 32
bit value into a 8 bit value using a pair of shifts and XOR operations.
Execution wise this new approach should provide more entropy and be faster
since we are bypassing the reciprocal multiplication to reduce the 32b
value to 16b and instead just using a shift/XOR combination.
In addition we can drop the unneeded adapter value from the call to get the
entropy since the netdev itself isn't even needed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire
corresponding QP lock before moving the CQEs into its corresponding SW
queue and accessing the SQ contents for completing a WR.
Ignore CQEs if corresponding QP is already flushed.
Cc: stable@vger.kernel.org
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fixes a crash that happens due to access to an
uninitialized DM pointer within the MR object.
The change makes sure the DM pointer in the MR object is set to
NULL during a non-DM MR creation to prevent a false indication
that this MR is related to a DM in the dereg flow.
Fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Reported-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a check in the ib_uverbs_rereg_mr flow to make
sure there's no attempt to rereg a device memory MR to regular MR.
In such case the command will fail with -EINVAL status.
fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Despite being advertised to user space application, the RSS inner
header flag was filtered by checks at the beginning of QP creation
routine.
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 4d02ebd9bb ("IB/mlx4: Fix RSS hash fields restrictions")
Fixes: 07d84f7b6a ("IB/mlx4: Add support to RSS hash for inner headers")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When generated bad work reqeust, it needs to
report to user. This patch mainly fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When posting a work reqeust, it need to update the owner bit of send
wqe. This patch mainly fix the bug when posting multiply work
request.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch update the order of cleaning hem table for trrl_table and irrl_table
as well as mtt_cqe_table and mtt_table.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set
is it valid to assign the dqpn field of qp context
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch deletes some unnecessary attr_mask if condition
in hip08 according to the IB protocol.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Only when the IB_QP_PATH_MTU flag of attr_mask is set
it is valid to assign the mtu field of qp context when
qp type is not GSI and UD.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to RoCE protocol, it is possible to
transition from error to error state for modifying
qp in hip08. This patch fix it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During init hem table, type should be used instead of
table->type which is finally initializaed with type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When skb is sent, it will pass the following functions in soft roce.
rxe_send [rdma_rxe]
ip_local_out
__ip_local_out
ip_output
ip_finish_output
ip_finish_output2
dev_queue_xmit
__dev_queue_xmit
dev_hard_start_xmit
In the above functions, if error occurs in the above functions or
iptables rules drop skb after ip_local_out, kfree_skb will be called.
So it is not necessary to call kfree_skb in soft roce module again.
Or else crash will occur.
The steps to reproduce:
server client
--------- ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
--------- ---------
On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512
The kernel configs CONFIG_DEBUG_KMEMLEAK and
CONFIG_DEBUG_OBJECTS are enabled on both server and client.
When rping runs, run the following command in server:
iptables -I OUTPUT -p udp --dport 4791 -j DROP
Without this patch, crash will occur.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV
will not be updated in update_wqe_psn, and the corresponding
wqe will not be acked in rxe_completer due to its last_psn is
zero. Finally, the other wqe will also not be able to be acked,
because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0
is still there. This causes large amount of io timeout when
nvmeof is over rxe.
Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the cases where iwpm_hash_bucket is NULL and where function
get_mapinfo_hash_bucket returns NULL then the map_info is never added
to hash_bucket_head and hence there is a leak of map_info. Fix this
by nullifying hash_bucket_head and if that is null we know that
that map_info was not added to hash_bucket_head and hence map_info
should be free'd.
Detected by CoverityScan, CID#1222481 ("Resource Leak")
Fixes: 30dc5e63d6 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.
1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).
CPU0 CPU1
==== ====
bind_list = cma_ps_find();
move netdevice to new namespace
delete net namespace
cma_exit_net()
idr_destroy(idr);
[..]
cma_find_listener(bind_list, ..);
2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().
Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.
Fixes: fa20105e09 ("IB/cma: Add support for network namespaces")
Fixes: 4be74b42a6 ("IB/cma: Separate port allocation to network namespaces")
Fixes: f887f2ac87 ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.
Fixes: fac9658cab ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1 contains custom macros for PCIe link configuration. Remove the
custom macros in favor of the PCIe link macros. No functional change
intended.
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: use "GT" instead of "GB"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().
The module remove function will wait for all the hw
resources to be released during the device removal event.
Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the functions rxe_mem_init_dma, rxe_mem_init_user, rxe_mem_init_fast
and copy_data, the function variable rxe is not used. So this function
variable rxe is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function rxe_set_mtu always returns zero. So this function type
is changed to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Reference id -> 1c8f422059 ("mm: change return type to
vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Reference id -> 1c8f422059 ("mm: change return type to
vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been
finding fair number of CM bugs. So provide option to disable it.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Starting from commit 72f36be061 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.
Fixes: e7996a9a77 ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.
This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.
This fix corrects it by considering the right mdev.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.
Ensure that rereg MR is only performed on a non-dead MR.
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c32 ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding the vector offset when calling to mlx5_vector2eqn() is wrong.
This is because mlx5_vector2eqn() checks if EQ index is equal to vector number
and the fact that the internal completion vectors that mlx5 allocates
don't get an EQ index.
The second problem here is that using effective_affinity_mask gives the same
CPU for different vectors.
This leads to unmapped queues when calling it from blk_mq_rdma_map_queues().
This doesn't happen when using affinity_hint mask.
Fixes: 2572cf57d7 ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0")
Fixes: 05e0cc84e0 ("net/mlx5: Fix get vector affinity helper function")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Before [1], When MAC address of the netdevice is changed, default GID is
supposed to get deleted and added back which affects the node and/or port
GUID in below sequence.
netdevice_event()
-> NETDEV_CHANGEADDR
default_del_cmd()
del_netdev_default_ips()
bond_delete_netdev_default_gids()
ib_cache_gid_set_default_gid()
ib_cache_gid_del()
add_cmd()
[..]
However, ib_cache_gid_del() was not getting invoked in non bonding
scenarios because event_ndev and rdma_ndev are same.
Therefore, fix such condition to ignore checking upper device when event
ndev and rdma_dev are same; similar to bond_set_netdev_default_gids().
Which this fix ib_cache_gid_del() is invoked correctly; however
ib_cache_gid_del() doesn't find the default GID for deletion because
find_gid() was given default_gid = false with
GID_ATTR_FIND_MASK_DEFAULT set.
But it was getting overwritten by ib_cache_gid_set_default_gid() later
on as part of add_cmd().
Therefore, mac address change used to work for default GID.
With refactor series [1], this incorrect behavior is detected.
Therefore,
when deleting default GID, set default_gid and set MASK flag.
when deleting IP based GID, clear default_gid and set MASK flag.
[1] https://patchwork.kernel.org/patch/10319151/
Fixes: 238fdf48f2 ("IB/core: Add RoCE table bonding support")
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When IPv6 link local address is removed, if it matches with the default
GID, default GID(s)s gets removed which may not be a desired behavior.
This behavior is introduced by refactor work in Fixes tag.
When IPv6 link address is removed, removing its equivalent RoCEv2 GID
which exactly matches with default RoCEv2 GID, is right thing to do.
However achieving it correctly requires lot more changes, likely in
roce_gid_mgmt.c and core/cache.c. This should be done as independent
patch.
Therefore, this patch preserves behavior of not deleteing default GIDs.
This is done by providing explicit hint to consider default GID property
using mask and default_gid; similar to add_gid().
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Default GIDs are marked reserved at the start of the GID table at index
0 and 1 by gid_table_reserve_default(). Currently when default GID is
requested, it can still allocates an empty slot which was not marked as
RESERVED for default GID, which is incorrect.
At least in current code flow of roce_gid_mgmt.c, in theory we can
still request to allocate more than one/two default GIDs depending
on how upper devices are setup.
Therefore, it is better for cache layer to only allow our reserved slots
to be used by default GID allocation requests.
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address(). Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command. Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.
Fix this by explicitly allowing a zero address family for the source.
Fixes: 2975d5de64 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is done by auditing all callers of ucma_get_ctx and switching the
ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers
a little less than half of the call sites.
The 11 remaining call sites to ucma_get_ctx() were manually audited.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Follow the advice from Bart, the function refcount_inc is replaced
with skb_get in commit 99dae69025 ("IB/rxe: optimize mcast recv process")
and commit 86af617641 ("IB/rxe: remove unnecessary skb_clone").
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function duplicate_request, the reference of skb can be increased
to replace the function skb_clone.
This will make rxe performace better and save memory.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function rxe_release_udp_tunnel is only used in rxe_net.c.
So it is necessary to make this function as static.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With gcc-4.1.2:
drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
Add the missing braces to fix this.
Fixes: 2eb9beaee5 ("IB/uverbs: Add flow_action create and destroy verbs")
Fixes: 7d12f8d5a1 ("IB/uverbs: Add modify ESP flow_action")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
i40iw_l2param_change() is never called in atomic context.
i40iw_make_listen_node() is only set as ".l2_param_change"
in struct i40e_client_ops, and this function pointer is not called
in atomic context.
Despite never getting called from atomic context,
i40iw_l2param_change() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
i40iw_make_listen_node() is never called in atomic context.
i40iw_make_listen_node() is only called by i40iw_create_listen, which is
set as ".create_listen" in struct iw_cm_verbs.
Despite never getting called from atomic context,
i40iw_make_listen_node() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
i40iw_add_mqh_4() is never called in atomic context, because it
calls rtnl_lock() that can sleep.
Despite never getting called from atomic context,
i40iw_add_mqh_4() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The functions rxe_set_mtu, rxe_add and rxe_remove are only used in their
own module. So it is not necessary to export them.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rxe_net_notifier is only used in the file rxe_net.c. So
remove it from rxe_net.h file and make it static in the file rxe_net.c.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The only thing it does is block module unload while work is posted from
rdma_resolve_ip().
However, this is not the right place to do this. The users of
rdma_resolve_ip() must ensure their own module does not unload until
rdma_resolve_ip() calls the callback, or until rdma_addr_cancel() is
called.
Similarly callers to rdma_addr_find_l2_eth_by_grh() must ensure their
module does not unload while they are calling code.
The only two users are already safe, so there is no need for this.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently rdma_addr_cancel does not prevent the callback from being used,
this is surprising and hard to reason about. There does not appear to be a
bug here as the only user of this API does refcount properly, fixing it
only to increase clarity.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the work queue is used directly to launch and track the work
there is no need for the second processing function to do 'all list
entries'. Just schedule all entries onto the main work queue directly.
We can also drop all of the useless list sorting now, as the workqueue
sorts by expiration time automatically.
This change requires switching lock to a spinlock as netdev notifiers
are called in an atomic context, this is now easy since the lock does
not need to be held across the lookup, that is already single
threaded due to the work queue.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.
Fixes these build errors:
drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'
Build-tested with multiple config combinations.
Fixes: 8c84660bb4 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file fs_helpers.h is included twice. So it should be removed.
Fixes: 802c212568 ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Validating input parameters should be done before getting the cm_id
otherwise it can leak a cm_id reference.
Fixes: 6a21dfc0d0 ("RDMA/ucma: Limit possible option size")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Adding mlx5_ib driver implementation for reg_dm_mr callback
which allows registering device memory (DM) as an MR for
local and remote access.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change updates the mlx5 interface to create mkey
on the device.
The updates in the command mailbox include increasing the
access mode type field to 5 bits in order to support additional
types such as MLX5_MKC_ACCESS_MODE_MEMIC which represents device
memory access type and will be used when registering MR on allocated
device memory.
All the places that use the old access mode format are adjusted as
well.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the mlx5_ib driver implementation for the device
memory allocation API.
It implements the ib_device callbacks for allocation and deallocation
operations as well as a new mmap command support which allows mapping
an allocated device memory to a VMA.
The change also adds reporting of device memory maximum size and
alignment parameters reported in device capabilities.
The allocation/deallocation operations are using new firmware
commands to allocate MEMIC memory on the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding new ioctl method for the MR object - REG_DM_MR.
This command can be used by users to register an allocated
device memory buffer as an MR and receive lkey and rkey
to be used within work requests.
It is added as a new method under the MR object and using a new
ib_device callback - reg_dm_mr.
The command creates a standard ib_mr object which represents the
registered memory.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change adds uverbs support for allocation/freeing
of device memory commands.
A new uverbs object is defined of type idr to represent
and track the new resource type allocation per context.
The API requires provider driver to implement 2 new ib_device
callbacks - one for allocation and one for deallocation which
return and accept (respectively) the ib_dm object which represents
the allocated memory on the device.
The support is added via the ioctl command infrastructure
only.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change allows vendors to report device memory capability
max_dm_size - to user via uverbs command.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch comes as a result of Sinan Kaya's work and the decision that
writel() must be a strong enough barrier for DMA.
wmb usages in qedr driver have either been removed where they were there
only to order DMA accesses, and replaced with smp_wmb and comments for the
places that the barrier was there for SMP reasons.
Fixes: 561e5d4896 ("RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rxe driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
They are only invoked by ib_core if they are implemented.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fact this struct was not init'd like all the others was missed when
the padding reserved field was added.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 71e80a4781 ("RDMA/qedr: Fix uABI structure layouts for 32/64 compat")
Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
Payload's header is returned with metadata representing the
IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
Hardware doesn't support matching SPI in flow steering rules
but just hashing and spreading the traffic accordingly.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to modify action_xfrm object. This
merely call the accel layer. Currently a user can modify only the
ESN parameters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.
A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.
Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.
Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.
Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.
Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation of kern_spec_to_ib_spec_filter, which takes
a uAPI based flow steering specification and creates the respective kernel
API flow steering structure, gets a ib_uverbs_flow_spec structure.
The new flow_action uAPI gets a match mask and filter from user-space
which aren't encoded in the flow steering's ib_uverbs_flow_spec structure.
Exporting the logic out of kern_spec_to_ib_spec_filter to get user-space
blobs rather than ib_uverbs_flow_spec structure.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ConnectX3 doesn't support egress flow steering. Return an EOPNOTSUPP
error when such a flow is being created.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Methods sometimes need to get one attribute out of a group of
pre-defined attributes. This is an enum-like behavior. Since
this is a common requirement, we add a new ENUM attribute to the
generic uverbs ioctl() layer. This attribute is embedded in methods,
like any other attributes we currently have. ENUM attributes point to
an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the
enum's attribute id in the id field and the internal PTR_IN attr id in
the enum_data.elem_id field. This ENUM attribute could be shared by
several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag,
stating this attribute must be supported by the kernel, like any other
attribute.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the IB core GID cache ensures that a zero GID doesn't exist in
the GID table remove zero GID checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.
As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.
A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.
"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."
GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.
Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.
ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.
Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently following inconsistencies exist.
1. ib_query_gid() returns GID from the software cache for a RoCE port
and returns GID from the HCA for an IB port.
This is incorrect because software GID cache is maintained regardless
of HCA port type.
2. GID is queries from the HCA via ib_query_gid and updated in the
software cache for IB link layer. Both of them might not be in sync.
ULPs such as SRP initiator, SRP target, IPoIB driver have historically
used ib_query_gid() API to query the GID. However CM used cached version
during CM processing, When software cache was introduced, this
inconsitency remained.
In order to simplify, improve readability and avoid link layer
specific above inconsistencies, this patch brings following changes.
1. ib_query_gid() always refers to the cache layer regardless of link
layer.
2. cache module who reads the GID entry from HCA and builds the cache,
directly invokes the HCA provider verb's query_gid() callback function.
3. ib_query_port() is being called in early stage where GID cache is not
yet build while reading port immutable property. Therefore it needs to
read the default GID from the HCA for IB link layer to publish the
subnet prefix.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_query_gid() fetches the GID from the software cache maintained in
ib_core for RoCE ports.
Therefore, simplify the provider drivers for RoCE to treat query_gid()
callback as never called for RoCE, and only require non-RoCE devices to
implement it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Check to make sure that ctx->cm_id->device is set before we use it.
Otherwise userspace can trigger a NULL dereference by doing
RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device.
Cc: <stable@vger.kernel.org>
Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
qedr driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support for resource profile 1 is currenlty deprecated due to
a pre-production errata. Remove this workaround as its no longer
needed.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.
Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.
New user space will consistently provide 8 bytes in both cases.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Check on return values and goto label mbx_err are unnecessary.
Addresses-Coverity-ID: 1271151 ("Identical code for different branches")
Addresses-Coverity-ID: 1268788 ("Identical code for different branches")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This structure is not needed since the introduction of commit
'c42687784b9a ("IB/ipoib: Scatter-Gather support in connected mode")'
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-31
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add raw BPF tracepoint API in order to have a BPF program type that
can access kernel internal arguments of the tracepoints in their
raw form similar to kprobes based BPF programs. This infrastructure
also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
returns an anon-inode backed fd for the tracepoint object that allows
for automatic detach of the BPF program resp. unregistering of the
tracepoint probe on fd release, from Alexei.
2) Add new BPF cgroup hooks at bind() and connect() entry in order to
allow BPF programs to reject, inspect or modify user space passed
struct sockaddr, and as well a hook at post bind time once the port
has been allocated. They are used in FB's container management engine
for implementing policy, replacing fragile LD_PRELOAD wrapper
intercepting bind() and connect() calls that only works in limited
scenarios like glibc based apps but not for other runtimes in
containerized applications, from Andrey.
3) BPF_F_INGRESS flag support has been added to sockmap programs for
their redirect helper call bringing it in line with cls_bpf based
programs. Support is added for both variants of sockmap programs,
meaning for tx ULP hooks as well as recv skb hooks, from John.
4) Various improvements on BPF side for the nfp driver, besides others
this work adds BPF map update and delete helper call support from
the datapath, JITing of 32 and 64 bit XADD instructions as well as
offload support of bpf_get_prandom_u32() call. Initial implementation
of nfp packet cache has been tackled that optimizes memory access
(see merge commit for further details), from Jakub and Jiong.
5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
API has been done in order to prepare to use print_bpf_insn() soon
out of perf tool directly. This makes the print_bpf_insn() API more
generic and pushes the env into private data. bpftool is adjusted
as well with the print_bpf_insn() argument removal, from Jiri.
6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
Format). The latter will reuse the current BPF verifier log as
well, thus bpf_verifier_log() is further generalized, from Martin.
7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
and write support has been added in similar fashion to existing
IPv6 IPV6_TCLASS socket option we already have, from Nikita.
8) Fixes in recent sockmap scatterlist API usage, which did not use
sg_init_table() for initialization thus triggering a BUG_ON() in
scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
uses a small helper sg_init_marker() to properly handle the affected
cases, from Prashant.
9) Let the BPF core follow IDR code convention and therefore use the
idr_preload() and idr_preload_end() helpers, which would also help
idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
pressure, from Shaohua.
10) Last but not least, a spelling fix in an error message for the
BPF cookie UID helper under BPF sample code, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug fixes:
- qedr driver bugfixes causing application hangs, wrong uapi errnos, and a
race condition
- 3 syzkaller found bugfixes in the ucma uapi
Regression fixes for things introduced in 4.16:
- Crash on error introduced in mlx5 UMR flow
- Crash on module unload/etc introduced by bad interaction of restrack
and mlx5 patches this cycle
- Typo in a two line syzkaller bugfix causing a bad regression
- Coverity report of nonsense code in hns driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0JcN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"It has been fairly silent lately on our -rc front. Big queue of
patches on the mailing list going to for-next though.
Bug fixes:
- qedr driver bugfixes causing application hangs, wrong uapi errnos,
and a race condition
- three syzkaller found bugfixes in the ucma uapi
Regression fixes for things introduced in 4.16:
- Crash on error introduced in mlx5 UMR flow
- Crash on module unload/etc introduced by bad interaction of
restrack and mlx5 patches this cycle
- Typo in a two line syzkaller bugfix causing a bad regression
- Coverity report of nonsense code in hns driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Introduce safer rdma_addr_size() variants
RDMA/hns: ensure for-loop actually iterates and free's buffers
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Check that device is connected prior to access it
RDMA/rdma_cm: Fix use after free race with process_one_req
RDMA/qedr: Fix QP state initialization race
RDMA/qedr: Fix rc initialization on CNQ allocation failure
RDMA/qedr: fix QP's ack timeout configuration
RDMA/ucma: Correct option size check using optlen
RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init
IB/mlx5: Don't clean uninitialized UMR resources
c4iw_ep_common structure holds the mapped addresses, so while printing
them, use appropriate pointers.
Fixes: bab572f1d ("iw_cxgb4: Guard against null cm_id in dump_ep/qp")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_cm_state enum is internal to rdma_cm kernel module.
It is not required to expose state enums to ULP modules.
So lets keep its scope limited to rdma_cm module in cma_priv.h file.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make dst_entry pointer as const struct dst_entry* to improve code
readablity to make sure that dst structure fields are not modified by
various functions which are using it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is already used in many places, get the rest of them too, only
to make the code a bit clearer & simpler.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Export the net device name and index to easily find connection
between IB devices and relevant net devices.
We also updated the comment regarding the devices without FW.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In mcast recv process, the function skb_clone is used. In fact,
the refcount can be increased to replace cloning a new skb since
the original skb will not be modified before it is freed.
This can make the performance better and save the memory.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Trivial fix to spelling mistake in DP_ERR message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This FW contains several fixes and features
RDMA Features
- SRQ support
- XRC support
- Memory window support
- RDMA low latency queue support
- RDMA bonding support
RDMA bug fixes
- RDMA remote invalidate during retransmit fix
- iWARP MPA connect interop issue with RTR fix
- iWARP Legacy DPM support
- Fix MPA reject flow
- iWARP error handling
- RQ WQE validation checks
MISC
- Fix some HSI types endianity
- New Restriction: vlan insertion in core_tx_bd_data can't be set
for LB packets
ETH
- HW QoS offload support
- Fix vlan, dcb and sriov flow of VF sending a packet with
inband VLAN tag instead of default VLAN
- Allow GRE version 1 offloads in RX flow
- Allow VXLAN steering
iSCSI / FcoE
- Fix bd availability checking flow
- Support 256th sge proerly in iscsi/fcoe retransmit
- Performance improvement
- Fix handle iSCSI command arrival with AHS and with immediate
- Fix ipv6 traffic class configuration
DEBUG
- Update debug utilities
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series contains Misc updates and cleanups for mlx5e rx path
and SQ recovery feature for tx path.
From Tariq: (RX updates)
- Disable Striding RQ when PCI devices, striding RQ limits the use
of CQE compression feature, which is very critical for slow PCI
devices performance, in this change we will prefer CQE compression
over Striding RQ only on specific "slow" PCIe links.
- RX path cleanups
- Private flag to enable/disable striding RQ
From Eran: (TX fast recovery)
- TX timeout logic improvements, fast SQ recovery and TX error reporting
if a HW error occurs while transmitting on a specific SQ, the driver will
ignore such error and will wait for TX timeout to occur and reset all
the rings. Instead, the current series improves the resiliency for such
HW errors by detecting TX completions with errors, which will report them
and perform a fast recover for the specific faulty SQ even before a TX
timeout is detected.
Thanks,
Saeed.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauuK/AAoJEEg/ir3gV/o+Ro4IAIBcQl4S/6jPttGDOPwElU4b
Q8MuQbnB9k36Kf6x3GrhBqwtoS3OYBLvfyOeZsghD8uyzklhnqR/psrCt1YhLXq7
aI5iFbuQucCUwIYBscuZegXBs+PTJYALoil05hOwSkwhEBZR53ZvdRQ9Jg0G0QiY
sYEYAl41A1DWQOLET5lwleUpVQnVnNvIcXqNHKBKbS4f8rmLpfsZ6YAxJiiIjeDJ
gLbsaxUyY3p77594okBk6DuFBWZsEAKwumspdSc92OEMrZSYE5ugNL+UgVEE7I8F
JgK/4OUarw3K7xwhAg//ZhTM1iRRdJv0Sz2GPhhWRzYB0jWACc3ZG2/M/WmxFIg=
=Uslu
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-03-27 (Misc updates & SQ recovery)
This series contains Misc updates and cleanups for mlx5e rx path
and SQ recovery feature for tx path.
From Tariq: (RX updates)
- Disable Striding RQ when PCI devices, striding RQ limits the use
of CQE compression feature, which is very critical for slow PCI
devices performance, in this change we will prefer CQE compression
over Striding RQ only on specific "slow" PCIe links.
- RX path cleanups
- Private flag to enable/disable striding RQ
From Eran: (TX fast recovery)
- TX timeout logic improvements, fast SQ recovery and TX error reporting
if a HW error occurs while transmitting on a specific SQ, the driver will
ignore such error and will wait for TX timeout to occur and reset all
the rings. Instead, the current series improves the resiliency for such
HW errors by detecting TX completions with errors, which will report them
and perform a fast recover for the specific faulty SQ even before a TX
timeout is detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_lock() is used everywhere, and contention is very high.
When someone wants to iterate over alive net namespaces,
he/she has no a possibility to do that without exclusive lock.
But the exclusive rtnl_lock() in such places is overkill,
and it just increases the contention. Yes, there is already
for_each_net_rcu() in kernel, but it requires rcu_read_lock(),
and this can't be sleepable. Also, sometimes it may be need
really prevent net_namespace_list growth, so for_each_net_rcu()
is not fit there.
This patch introduces new rw_semaphore, which will be used
instead of rtnl_mutex to protect net_namespace_list. It is
sleepable and allows not-exclusive iterations over net
namespaces list. It allows to stop using rtnl_lock()
in several places (what is made in next patches) and makes
less the time, we keep rtnl_mutex. Here we just add new lock,
while the explanation of we can remove rtnl_lock() there are
in next patches.
Fine grained locks generally are better, then one big lock,
so let's do that with net_namespace_list, while the situation
allows that.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header. So add it to
rdma_user_cm.h.
This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.
Fixes: 00313983cd ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value
- convert 'type array[]' tracepoint arguments into 'type *array',
since compiler will warn that sizeof('type array[]') == sizeof('type *array')
and later should be used instead
The CAST_TO_U64 macro in the later patch will enforce that tracepoint
arguments can only be integers, pointers, or less than 8 byte structures.
Larger structures should be passed by reference.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Move mlx5_ib dump error CQE implementation to mlx5 CQ header file in
order to use it in a downstream patch from mlx5e.
In addition, use print_hex_dump instead of manual dumping of the buffer.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.
It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
IB core maintains the GID cache entries for the GID table.
This cache table has to be maintained regardless of HCA's
support of GID table.
For IB and iWarp ports, cache is created by querying the HCA.
For RoCE cache is created based on netdev events.
Therefore just refer to the RoCE port property of the {device, port} to
decide whether to build cache by querying HCA or from netdev events.
There is no need to check if HCA support GID table or not.
ib_cache_update() referred to RoCE attribute before validating
port. Though in all current callers port is valid, it is incorrect
to query RoCE port property before validating the port. Therefore,
rdma_protocol_roce() check is done after rdma_is_port_valid() verifies
that port is valid.
Fixes: 115b68aa6e ("IB/ocrdma: Removed GID add/del null routines")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Even though API is only used by IPoIB driver, its incorrect to refer
RoCE GID table property to search for GID.
Look for only IB link layer to search for the GID.
Fixes: dbb12562f7 ("IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_find_gid_by_filter() searches GID with filter only for RoCE link
layer regardless of HCA's support for GID table.
Therefore, right way to lookup is compare RoCE port property and not
the GID table property.
Fixes: 99b27e3b5d ("IB/cache: Add ib_find_gid_by_filter cache API")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to following reasons, GID table event is generated regardless of GID
table property.
1. GID table cache is maintained at ib core layer regardless of link layer.
2. GID change event has no relation with IB link layer.
3. GID change event also doesn't depend on whether HCA supports GID table
or not.
Fixes: f3906bd360 ("IB/core: Refactor GID cache's ib_dispatch_event")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to below reasons, it is better to not support alternate path receive
messages for RoCE in near term.
1. Alternate path for RoCE is not supported at rdmacm layer.
2. It is not supported in uverbs/core layer for RoCE.
3. Alternate path for IPv6 for link local address cannot resolve route
determinstically without a valid incoming interface id whose usecase
make sense only with dual port mode.
4. init_av_from_path while processing LAP messages for IB and RoCE can
lead to adding duplicate entry of AV into the port list, leads to list
corruption.
5. rdma-core userspace a well known userspace implementation has removed
support of libucm which use ucm.ko module, which is the only module that
can trigger alternate path related messages.
6. ucm kernel module is requested to be removed from the IB core in
patch [1].
[1] https://patchwork.kernel.org/patch/10268503/
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently access to hardware stats buffer isn't protected, this can
result in multiple writes and reads at the same time to the same
memory location. This can lead to providing an incorrect value to
the user. Add a mutex to protect against it.
Fixes: b40f4757da ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current for-loop zeros variable i and only loops once, hence
not all the buffers are free'd. Fix this by setting i correctly.
Detected by CoverityScan, CID#1463415 ("Operands don't affect result")
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When working with RC QPs, the FW sets the ECN capable bits for all
the RoCE v2 packets. On the other hand, for UD QPs, the driver needs
to set the the ECN capable bits in the Address Handler since the HW
generates each packet according to the Address Handler and not
the QP context.
If ECN is not enabled in NIC or switch, these bits are ignored.
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With 32 bit compilation several of the fields become misaligned here.
Fixing this is an ABI break for 32 bit rxe and it is in well used
portions of the rxe ABI.
To handle this we bump the ABI version, as expected. However the user
space driver doesn't handle it properly today, so all existing user
space continues to work.
Updated userspace will start to require the necessary kernel version.
We don't expect there to be any 32 bit users of rxe. Most likely cases,
such as ARM 32 already generally don't work because rxe does not handle
the CPU cache properly on its shared with userspace pages.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_ucm_event_resp is a different length on 32 and 64 bit compiles.
The kernel requires it to be the expected length or longer so 32 bit
builds running on a 64 bit kernel will not work.
Retain full compat by having all kernels accept a struct with or without
the trailing reserved field.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that device exists prior to accessing its properties.
Reported-by: <syzbot+71655d44855ac3e76366@syzkaller.appspotmail.com>
Fixes: 7521663857 ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Last user is gone after bdf5bd7f21 "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.
dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is preparation to drop NETDEV_UNREGISTER_FINAL.
Since the cmd is used in usnic_ib_netdev_event_to_string()
to get cmd name, after plain removing NETDEV_UNREGISTER_FINAL
from everywhere, we'd have holes in event2str[] in this
function.
Instead of that, let's make NETDEV_XXX commands names
available for everyone, and to define netdev_cmd_to_name()
in the way we won't have to shaffle names after their
numbers are changed.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently CM request for RoCE follows following flow.
rdma_create_id()
rdma_resolve_addr()
rdma_resolve_route()
For RC QPs:
rdma_connect()
->cma_connect_ib()
->ib_send_cm_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
For UD QPs:
rdma_connect()
->cma_resolve_ib_udp()
->ib_send_cm_sidr_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
In both the flows, route is already resolved before sending CM requests.
Therefore, code is refactored to avoid resolving route second time in
ib_cm layer.
ib_init_ah_attr_from_path() is extended to resolve route when it is not
yet resolved for RoCE link layer. This is achieved by caller setting
route_resolved field in path record whenever it has route already
resolved.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ib_query_gid() in commit [1] refers to RoCE GID table capability of
the HCA using rdma_cap_roce_gid_table().
ib_core maintains the GID table cache regardless of the HCA provider
drivers capability to maintain RoCE GID table.
Therefore, whether to return a GID table entry from the software cache or
from HCA should be done based on whether the port is RoCE or not.
[1] commit 03db3a2d81 ("IB/core: Add RoCE GID table management")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The restrack clean routine had simple, but powerful WARN_ON check
to see if all resources are cleared prior to releasing device.
The WARN_ON check performed very well, but lack of information
which device caused to resource leak, the object type and origin
made debug to be fun and challenging at the same time.
The fact that all dumps were the same because restrack_clean() is
called in dealloc() didn't help either.
So let's fix spelling error and convert WARN_ON to be more debug
friendly. The dmesg cut below gives example of how the output
will look output for the case fixed in patch [1]
[ 438.421372] restrack: ------------[ cut here ]------------
[ 438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2
[ 438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed
[ 438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed
[ 438.429660] restrack: ------------[ cut here ]------------
[1] https://patchwork.kernel.org/patch/10298695/
Cc: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon detecting both kernel and user space support record doorbell,
the kernel needs to enable this capability in hardware by db_en,
and it should take place before cq context configuration in
hns_roce_cq_alloc. Currently, db_en is configured after cq alloc
and db_map_user has similar problem.
Reported-by: Xiping Zhang <zhangxiping3@huawei.com>
Fixes: 9b44703d0a ("RDMA/hns: Support cq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Once the FW is transitioned to error, FLUSH cqes can be received.
We want the driver to be aware of the fact that QP is already in error.
Without this fix, a user may see false error messages in the dmesg log,
mentioning that a FLUSH cqe was received while QP is not in error state.
Fixes: cecbcddf ("qedr: Add support for QP verbs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return code wasn't set properly when CNQ allocation failed.
This only affect error message logging, currently user will
receive an error message that says the qedr driver load failed
with rc '0', instead of ENOMEM
Fixes: ec72fce4 ("qedr: Add support for RoCE HW init")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QPs that were configured with ack timeout value lower than 1
msec will not implement re-transmission timeout.
This means that if a packet / ACK were dropped, the QP
will not retransmit this packet.
This can lead to an application hang.
Fixes: cecbcddf6 ("qedr: Add support for QP verbs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The option size check is using optval instead of optlen
causing the set option call to fail. Use the correct
field, optlen, for size check.
Fixes: 6a21dfc0d0 ("RDMA/ucma: Limit possible option size")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case we failed to create UMR resources, mark them as invalid so we
won't try to destroy them on the unwind path.
Add the relevant checks to destroy_umrc_res(), this is done for the
unlikely event ib_register_device() or create_umr_res() err out and we
try to destroy invalid objects.
Fixes: 42cea83f95 ("IB/mlx5: Fix cleanup order on unload")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Since code already has an explicit barrier call, changing writel() to
writel_relaxed().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Many bug fixes related to syzkaller from Leon Romanovsky.
These are still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during scale-up
testing
- Bug fixes for the profile and restrack patches accepted during this merge
window
- Compile warning cleanups from Arnd, this is apparently the last warning
to make 32 bit builds quite.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gal+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.
This is going to be on ongoing theme for some time, I think. Both
Google and Mellanox are now running syzkaller on different parts of
the user API.
Summary:
- Many bug fixes related to syzkaller from Leon Romanovsky. These are
still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during
scale-up testing
- Bug fixes for the profile and restrack patches accepted during this
merge window
- Compile warning cleanups from Arnd, this is apparently the last
warning to make 32 bit builds quiet"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/verbs: Remove restrack entry from XRCD structure
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
infiniband: qplib_fp: fix pointer cast
IB/mlx5: Fix cleanup order on unload
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Fix access to non-initialized CM_ID object
RDMA/core: Do not use invalid destination in determining port reuse
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
Enable the ioctl() uAPI for IB by default if the standard write()
uAPI (INFINIBAND_USER_ACCESS) is enabled. Verbs that are
also available under the old write() uAPI are put inside a new
INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI Kconfig.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, all objects are declared in uverbs_std_types. This could lead
to a huge file once we implement all objects, methods and handlers.
Moving each object to its own file to keep the files smaller and more
readable. uverbs_std_types.c will only contain the parsing tree
definition and objects without any methods.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ioctl() based uverbs is based on merging feature trees. This teaches
the generic parser how to parse methods according to the provider's
support. In order to support merging with the common objects, exporting
the common-object-tree to the provider drivers.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing
attributes. The behavior of this flag was the kernel accepts anything
bigger than the minimum size it specified. This is unsafe, since in
order to safely extend an attribute, we need to make sure unknown size
is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with
UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the
unknown size is zero. In addition, attributes are now decorated with
UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum
and known length.
Users of this flag needs to use copy_from_or_zero functions/macros.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Downstream patches extend uverbs_attr_spec with new fields.
In order to save space, we move the type and flags fields to
the various attribute flavors contained in the union.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use macros to make names consistent in ioctl() uAPI:
The ioctl() uAPI works with object-method hierarchy. The method part
also states which handler should be executed when this method is called
from user-space. Therefore, we need to tie method, method's id, method's
handler and the object owning this method together.
Previously, this was done through explicit developer chosen names.
This makes grepping the code harder. Changing the method's name,
method's handler and object's name to be automatically generated based
on the ids.
The headers are split in a way so they be included and used by
user-space. One header strictly contains structures that are used
directly by user-space applications, where another header is used for
internal library (i.e. libibverbs) to form the ioctl() commands.
Other header simply contains the required general command structure.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The error in ucma_create_id() left ctx in the list of contexts belong
to ucma file descriptor. The attempt to close this file descriptor causes
to use-after-free accesses while iterating over such list.
Fixes: 7521663857 ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to the SRP standard the INITIATOR and TARGET PORT IDENTIFIER
fields from the login request specify the I_T nexus. Whether or not an
SRP target closes an existing connection for an I_T nexus when a login
request is received depends on the value of the MULTICHANNEL field in
the login request. The SRP initiator derives the value of the
INITIATOR and TARGET PORT IDENTIFIER fields from the .id_ext,
.ioc_guid, .initiator_ext .sgid members of the srp_target_port
structure. This means that the .rdma_cm.dst check must be removed from
srp_conn_unique(). This patch avoids that for target ports that have
multiple addresses, e.g. an IPv4 and an IPv6 address, and if a
connection is established to both target port addresses, that the
initiator logs in alternatingly every 10 seconds to the other target
port address. An SRP target must namely terminate all but one
connections for a given I_T nexus if the MULTICHANNEL field has not
been set in the login request.
Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.
This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The data in resp will be copied from kernel to userspace, thus it needs to
be initialized to zeros to avoid copying uninited stack memory.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e088a685ea ("RDMA/hns: Support rq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use rdma_is_port_valid() which performs port validity check instead of
open coding the same check.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before commit f1b65df5a2 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.
This patch restores the original behavior.
Fixes: f1b65df5a2 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: Honggang Li <honli@redhat.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before commit f1b65df5a2 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set default active_width and
active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
Now, the active_width and active_speed are zeros if the RoCE port
is in DOWN state. The speed string should be set to " SDR" instead of
a blank string when active_speed is zero.
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
notify uld drivers if the adapter encounters fatal
error.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a default, for Ethernet packets, the device scatters only the payload
of ingress packets. The scatter FCS feature lets the user to get the FCS
(Ethernet's frame check sequence) in the received WR's buffer as a 4
Bytes trailer following the packet's payload.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report to the user area the TSO device capabilities, it includes the
max_tso size and the QP types that support it.
The TSO is applicable only when when of the ports is ETH and the device
supports it.
uresp logic around rss_caps is updated to fix a till-now harmless bug
computing the length of the structure to copy. The code did not handle the
implicit padding before rss_caps correctly. This is necessay to copy
tss_caps successfully.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no explicit tear-down sequence initiated on
connections if the Control QP OP, Modify QP to close,
fails. Fix this by triggering a driver generated
Asynchronous Event (AE) on Modify QP failures and
tear-down the connection on receipt of the AE.
This fix can be generalized to other Modify QP failures
(i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure
will require a connection tear-down.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flush CQP OP can be used to optionally generate
Asynchronous Events (AEs) in addition to QP flush.
Consolidate all HW AE generation code under a new
function i40iw_gen_ae which use the flush CQP OP
to only generate AEs.
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All of these defines are part of the uABI for the driver, this
header duplicates providers/i40iw/i40iw-abi.h in rdma-core.
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps)
and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via
mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to
userspace and form part of the uAPI.
Move them to the uapi header where they belong.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Open coding pointer math is not acceptable for describing the uABI in
RDMA. Provide structs for all the cases.
The udata is casted to the struct as close to the verbs entry point
as possible for maximum clarity. Function signatures and so forth
are revised to allow for this.
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
