Commit Graph

28 Commits

Author SHA1 Message Date
Niklas Cassel 4022d039a3 net: smmac: allow configuring lower pbl values
The driver currently always sets the PBLx8/PBLx4 bit, which means that
the pbl values configured via the pbl/txpbl/rxpbl DT properties are
always multiplied by 8/4 in the hardware.

In order to allow the DT to configure lower pbl values, while at the
same time not changing behavior of any existing device trees using the
pbl/txpbl/rxpbl settings, add a property to disable the multiplication
of the pbl by 8/4 in the hardware.

Suggested-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08 13:07:10 -05:00
Niklas Cassel 89caaa2d80 net: stmmac: add support for independent DMA pbl for tx/rx
GMAC and newer supports independent programmable burst lengths for
DMA tx/rx. Add new optional devicetree properties representing this.

To be backwards compatible, snps,pbl will still be valid, but
snps,txpbl/snps,rxpbl will override the value in snps,pbl if set.

If the IP is synthesized to use the AXI interface, there is a register
and a matching DT property inside the optional stmmac-axi-config DT node
for controlling burst lengths, named snps,blen.
However, using this register, it is not possible to control tx and rx
independently. Also, this register is not available if the IP was
synthesized with, e.g., the AHB interface.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08 13:07:10 -05:00
Pavel Machek c6c60dae81 stmmac: cleanup documenation, make it match reality
Fix english in documentation, make documentation match reality, remove
options that were removed from code.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03 15:07:32 -05:00
Giuseppe CAVALLARO 70523e639b drivers: net: stmmac: reworking the PCS code.
The 3.xx and 4.xx synopsys gmacs have a very similar
PCS embedded module and they share almost the same registers:
for example:
  AN_Control, AN_Status, AN_Advertisement, AN_Link_Partner_Ability,
  AN_Expansion, TBI_Extended_Status.

Just the RGMII/SMII Control/Status register differs.

So This patch aims to reorganize and enhance the PCS support.
It removes the existent support from the dwmac1000/dwmac4_core.c
moving basic PCS functions inside a new file called: stmmac_pcs.h.

The patch also reviews the available APIs to be better shared among
different hardware and easily enhanced to support new features.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28 08:54:23 -04:00
Alexandre TORGUE 0b7a43d376 Documentation: networking: update stmmac
Update stmmac driver documentation according to new GMAC 4.x family.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02 20:23:09 -04:00
Andrew Lunn a5597008db phy: fixed_phy: Add gpio to determine link up/down.
An SFP module may have a link up/down status pin which can be
connection to a GPIO line of the host. Add support for reading such an
GPIO in the fixed_phy driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:02 -07:00
Joachim Eastwood 75fee59550 stmmac: remove setup/free glue callbacks
As all dwmac-* drivers have been converted to have a proper probe
function the setup callback can now be removed. Also remove the
free callback that wasn't used by any driver.

New dwmac-* drivers should implement standard probe and remove
functions to preform any needed setup and teardown.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 00:13:25 -07:00
Joachim Eastwood 0933328a1b stmmac: remove unused stmmac_of_data struct
As dwmac-* drivers that need OF match have been converted
to use their own internal OF match data structure this can
now be removed.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 00:13:24 -07:00
Joachim Eastwood f4c190eb8b stmmac: drop custom_* fields from plat_stmmacenet_data
Both of these fields are unused and has been unused since they
were added 3 and 5 years ago. Drop them since they are clearly
not very useful.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20 20:45:57 -07:00
Giuseppe CAVALLARO 233b36cf1f stmmac: update driver documentation
Recently many changes have been done inside the driver
so this patch updates the driver's doc for example reviewing
information for the rx and tx processes that are managed
by napi method, adding new information for missing glue-logic files
etc.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19 15:04:57 -05:00
Chen-Yu Tsai 938dfdaa3c net: stmmac: Allocate and pass soc/board specific data to callbacks
The current .init and .exit callbacks requires access to driver
private data structures. This is not a good seperation and abstraction.

Instead, we add a new .setup callback for allocating private data, and
pass the returned pointer to the other callbacks.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 20:02:02 -08:00
Masanari Iida c17cb8b55b doc:net: Fix typo in Documentation/networking
Correct spelling typo in Documentation/networking

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:10:20 -04:00
Sonic Zhang e2a240c7d3 driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.
Some synopsys ip implementation doesn't support DMA store and forward mode,
such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only.
Update document and devicetree as well.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30 17:26:09 -04:00
Giuseppe CAVALLARO 49cfbf675c stmmac: review driver documentation
This patch reviews the driver documentation file;
for example, there were some new fields (in the driver
module parameter section) and the ptp files were
not documented.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 16:55:27 -04:00
Giuseppe CAVALLARO 94fbbbf894 stmmac: update the Doc and Version (PTP+SGMII)
This patch updates the stmmac.txt file adding information related to the PTP
and SGMII/RGMII supports.

Also the patch updates the driver version to: March_2013.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:53:37 -04:00
Giuseppe CAVALLARO f9e01b5565 stmmac: update the doc with new IRQ mitigation
This patch updates the stmmac.txt adding some information
about the new rx/tx mitigation schema adopted in the driver.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:12 -05:00
Srinivas Kandagatla d56631a66c net:stmmac: Remove bus_id from mdio platform data.
This patch removes bus_id from mdio platform data, The reason to remove
bus_id is, stmmac mdio bus_id is always same as stmmac bus-id, so there
is no point in passing this in different variable.
Also stmmac ethernet driver connects to phy with bus_id passed its
platform data.
So, having single bus-id is much simpler.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31 16:11:28 -04:00
Giuseppe CAVALLARO 0ec2ccd080 stmmac: update the driver Documentation and add EEE
This patch updates the stmmac's documentation adding
some missing files in the section used to describe the
internal driver's structure.

Also the patch adds a new section to describe the EEE support.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01 03:34:49 -07:00
Giuseppe CAVALLARO 3d2377144c stmmac: update driver's doc
Fixed the driver's documentation that was obsolete and didn't
report new platform fields (recently added).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06 09:34:56 -07:00
Giuseppe CAVALLARO cd7201f477 stmmac: MDC clock dynamically based on the csr clock input
If a specific clk_csr value is passed from the platform
this means that the CSR Clock Range selection cannot be
changed at run-time and it is fixed (as reported in the driver
documentation). Viceversa the driver will try to set the MDC
clock dynamically according to the actual clock input.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Reviewed-by: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:39:24 -04:00
Deepak SIKRI 8327eb65e7 stmmac: re-work the internal GMAC DMA platf parameters
This patch re-works the internal GMAC DMA parameters
passed from the platform.
In the past, we only passed the pbl but, with new core,
other parameters can be passed and are mandatory on some
platforms.

New parameters are documented in stmmac.txt because this
patch has an impact for many platforms.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:39:24 -04:00
Deepak SIKRI 55f9a4d6fa stmmac: Define CSUM offload engine Types
This patch explicitly defines the CSUM offload engine type which need
(not mandatory) to be passed from the platform code.
STMMAC core supports two check sum offload engine types- Type-1 & Type-2.
Also, there are STMMAC cores that do not have the check sum offload
capabilities.

The behaviour of Type-1 & Type-2 cores related to provision of checksum
increases the packet length for Type-1 cores by 2, as the checksum is appended
at the end of data packet and the same is made accountable in the DMA status.
The STMMAC cores beyond Version-3.5 provide HW interface registers which allows
the user to read the HW capabilities, while to support the previous cores the
information related to HW capabilities has to be provided from the platform
code.

The Type-1 cores which do not have the HW register interface need this
information.

This patch also updates the driver's doc.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:39:23 -04:00
Giuseppe CAVALLARO 5b9932685f stmmac: update the driver's documentation (Dec-2011)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-21 15:44:34 -05:00
Giuseppe CAVALLARO 51e3137b9b stmmac: update the driver version and doc (V4)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 19:24:16 -04:00
Giuseppe CAVALLARO 4f2f25f9f0 stmmac: update the doc with new info about the driver's debug (v3)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:40:06 -04:00
Giuseppe CAVALLARO 557e2a394d stmmac: improve and up-to-date the documentation
This patch adds new information for the driver
especially about its platform structure fields.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 15:29:16 -07:00
Giuseppe Cavallaro f5539b5bfa stmmac: update the driver documentation
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12 12:43:34 -08:00
Giuseppe CAVALLARO a1d6f3f655 stmmac: add documentation for the driver.
Add Documentation/networking/stmmac.txt for the
stmmac network driver.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 17:26:00 -07:00