Commit Graph

111 Commits

Author SHA1 Message Date
Olof Johansson 8c0993621c Reset controller changes for v5.3
This tag adds support for the Bitmain BM1880 reset controller to the
 reset-simple driver and fixes a spelling mistake in the i.MX7 reset
 controller binding document.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXR3SoxcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwEb6AP4i9FSRodn9AFs8jKcgUC63SPyL
 L5loesyFpiTVpunMsQEAlexZ6wSY2zdfVrDXh1lLHmuACc8AuebItcdpaRwc3As=
 =Zp5w
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into arm/drivers

Reset controller changes for v5.3

This tag adds support for the Bitmain BM1880 reset controller to the
reset-simple driver and fixes a spelling mistake in the i.MX7 reset
controller binding document.

* tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  reset: Add reset controller support for BM1880 SoC
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller

Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04 07:05:23 -07:00
Thomas Gleixner 9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner 9952f6918d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:52 -07:00
Thomas Gleixner 1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Manivannan Sadhasivam ef98682a4e dt-bindings: reset: Add devicetree binding for BM1880 reset controller
Add devicetree binding for Bitmain BM1880 SoC reset controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-24 16:08:14 +02:00
Neil Armstrong a6256b3a92 dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
The G12A Documentation lacked these 2 reset lines, but they are present and
used for each USB 2 PHYs.

Add them to the dt-bindings for the upcoming USB support.

Fixes: dbfc54534d ("dt-bindings: reset: meson: add g12a bindings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-25 16:22:10 +01:00
Linus Torvalds dc2535be1f We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
 hardware out there and the normal small fixes and updates, but then we
 have some core framework changes too.
 
 In the core framework, we introduce support for a clk_get_optional() API
 to get clks that may not always be populated and a way to devm manage clkdev
 lookups registered by provider drivers. We also do some refactoring to simplify
 the interface between clkdev and the common clk framework so we can reuse the DT
 parsing and clk_get() path in provider drivers in the future. This work will
 continue in the next few cycles while we convert how providers specify clk
 parents.
 
 On the driver side, the biggest part of the dirstat is the Amlogic clk driver
 that got support for the G12A SoC. It dominates with almost half the overall
 diff, while the second largest part of the diff is in the i.MX clk driver
 that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
 and Qualcomm drivers rounding out the big part of the dirstat because they both
 got new hardware support for SoCs. The rest is just various updates and non-critical
 fixes for existing drivers.
 
 Core:
  - Convert a few clk bindings to JSON schema format
  - Add a {devm_}clk_get_optional() API
  - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
  - Start rewriting clk parent registration and supporting device links
    by moving around code that supports clk_get() and DT parsing of the
    'clocks' property
 
 New Drivers:
  - Add Qualcomm MSM8998 RPM managed clks
  - IPA clk support on Qualcomm RPMh clk controllers
  - Actions Semi S500 SoC clk support
  - Support for fixed rate clks populated from an MMIO register
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
  - Add TMU (timer) clocks on Renesas RZ/G2E
  - Add Amlogic G12A Always-On Clock Controller
  - Add 32k clock generation for Amlogic AXG
  - Add support for the Mali GPU clocks on Amlogic Meson8
  - Add Amlogic G12A EE clock controller driver
  - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
  - Add i.MX8MM SoC clk driver support
 
 Removed Drivers:
  - Remove clps711x driver as the board support is gone
 
 Updates:
  - 3rd ECO fix for Mediatek MT2712 SoCs
  - Updates for Qualcomm MSM8998 GCC clks
  - Random static analysis fixes for clk drivers
  - Support for sleeping gpios in the clk-gpio type
  - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
  - Split LCDC into two clks on the Marvell MMP2 SoC
  - Various DT of_node refcount fixes
  - Get rid of CLK_IS_BASIC from TI code (yay!)
  - TI Autoidle clk support
  - Fix Amlogic Meson8 APB clock ID name
  - Claim input clocks through DT for Amlogic AXG and GXBB
  - Correct the DU (display unit) parent clock on Renesas RZ/G2E
  - Exynos5433 IMEM CMU crypto clk support (SlimSS)
  - Fix for the PLL-MIPI on the Allwinner A23
  - Fix Rockchip rk3328 PLL rate calculation
  - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
  - i.MX SCU clk driver clk_set_parent() and cpufreq support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyIK9URHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtIA//SRHcUJBuF7bgLs0GWDL/C0WwQf90bgLn
 83jMUX9MCIS+/RBEUi/Xf9psGVaW3YPEAiRcYUeI1YIZhCrdZHp2YGClKOpXaXth
 vgM7Je+6Say+7ru6J9eHqhbEgx2e+HqT4shxK5I5J0SqMFgdugim4pthk+Lr/WL0
 bMdNHTERZUFrIId10RxuCH7D72nhkwiRkwNDfWjASKoH3spXLKC1vl/wbS5QDE1O
 eXA9OwkonSyrBKX7zMeQiks6f7HWoJO7ei05Twv4CD9UEeS17KmB6mkbmT3GPAuq
 dWbLOnt7I80fMnthKLIR0IWtJuCvPv3jXgP+Fin+e4wutNCnuduHIVc2XeQYmDaX
 rbo/20q4DarL2AaakuowXA7UJ75zYfxPkwgpwcYZ/QW9yzT6QMfynAYekjJGTdt3
 6VootYAwYIsh1VMGZIQLs23AaNYayDy0QWx/prxnEi95lK/+zjqVySPYC/rWe7XQ
 rUrO6YY0YxRdf5uVHneIfIJGs5F/Q8DgdLXp4tf2Ud2YF1bZ0UQOUKehxwM0rxRX
 F9P6iP6mHUuUPMa9rDlwSmgQXDdqH7E5IbXdSPjEFBogBfmhJfVKAo1EyaZgUytZ
 Y42qG/P3fGGfegfWTRAoaDRJn/+HfEmtREdgQ8JO14xlZwRDb/M43IEiQP4zGwlc
 f/OuWu3O9xA=
 =D4Bv
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...
2019-03-14 08:46:17 -07:00
Stephen Boyd 3f8e7e7247 Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next
- Add a {devm_}clk_get_optional() API
 - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups

* clk-optional:
  clk: Add (devm_)clk_get_optional() functions
  clk: Add comment about __of_clk_get_by_name() error values

* clk-devm-clkdev-register:
  clk: clk-st: avoid clkdev lookup leak at remove
  clk: clk-max77686: Clean clkdev lookup leak and use devm
  clkdev: add managed clkdev lookup registration

* clk-allwinner:
  clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

* clk-meson: (22 commits)
  clk: meson: meson8b: fix the naming of the APB clocks
  dt-bindings: clock: meson8b: add APB clock definition
  clk: meson: Add G12A AO Clock + Reset Controller
  dt-bindings: clk: add G12A AO Clock and Reset Bindings
  clk: meson: factorise meson64 peripheral clock controller drivers
  clk: meson: g12a: add peripheral clock controller
  dt-bindings: clk: meson: add g12a periph clock controller bindings
  clk: meson: pll: update driver for the g12a
  clk: meson: rework and clean drivers dependencies
  clk: meson: axg-audio does not require syscon
  clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
  clk: export some clk_hw function symbols for module drivers
  clk: meson: ao-clkc: claim clock controller input clocks from DT
  clk: meson: axg: claim clock controller input clock from DT
  clk: meson: gxbb: claim clock controller input clock from DT
  clk: meson: meson8b: add the GPU clock tree
  clk: meson: meson8b: use a separate clock table for Meson8
  clk: meson: axg-ao: add 32k generation subtree
  clk: meson: gxbb-ao: replace cec-32k with the dual divider
  clk: meson: add dual divider clock driver
  ...

* clk-renesas:
  clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Add TMU clock
  clk: renesas: r8a77980: Add RPC clocks
  clk: renesas: rcar-gen3: Add RPC clocks
  clk: renesas: rcar-gen3: Add spinlock
  clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
  clk: renesas: r8a774c0: Correct parent clock of DU
  clk: renesas: r8a774a1: Add missing CANFD clock
  clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08 10:27:21 -08:00
Arnd Bergmann 6f2185f8e3 Reset controller changes for v5.1
This adds the include/linux/reset directory to MAINTAINERS for reset
 specific headers and adds headers for sunxi and socfpga in there to
 get rid of a few extern function declarations.
 There is a new reset driver for the Broadcom STB reset controller and
 the i.MX7 system reset controller driver is extended to support i.MX8MQ
 as well. Finally, there is a new header with reset id constants for
 the Meson G12A SoC, which has a reset controller identical to Meson AXG
 and thus can reuse its driver and DT bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXF2yeRcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwH8jAP9OQaMl5llVXuHSFOwiqkJ2I09p
 oROxu3dI/A4q7d5T8QD/Xuo4piSAdoT5YZyHp16NUafW3L1//wqTvxk0ubeTsgA=
 =EIyo
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into arm/drivers

Reset controller changes for v5.1

This adds the include/linux/reset directory to MAINTAINERS for reset
specific headers and adds headers for sunxi and socfpga in there to
get rid of a few extern function declarations.
There is a new reset driver for the Broadcom STB reset controller and
the i.MX7 system reset controller driver is extended to support i.MX8MQ
as well. Finally, there is a new header with reset id constants for
the Meson G12A SoC, which has a reset controller identical to Meson AXG
and thus can reuse its driver and DT bindings.

* tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: meson: add g12a bindings
  reset: imx7: Add support for i.MX8MQ IP block variant
  reset: imx7: Add plubming to support multiple IP variants
  reset: Add Broadcom STB SW_INIT reset controller driver
  dt-bindings: reset: Add document for Broadcom STB reset controller
  reset: socfpga: declare socfpga_reset_init in a header file
  reset: sunxi: declare sun6i_reset_init in a header file
  MAINTAINERS: use include/linux/reset for reset controller related headers
  dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 17:21:32 +01:00
Arnd Bergmann 59f527dd7a arm64: zynqmp: SoC changes for v5.1
- Extend firmware interface with reset, nvmem,
   power management and power domain support
 
 - Add reset, nvmem driver, power management and
   power domain drivers
 -
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlxixLEACgkQykllyylKDCEduwCeLkIFr48uJ/5Fv1X16gitcrOk
 F38An2wbsk21xkWQpfzCFdUrpPbT0u4t
 =GOP8
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/drivers

arm64: zynqmp: SoC changes for v5.1

- Extend firmware interface with reset, nvmem,
  power management and power domain support

- Add reset, nvmem driver, power management and
  power domain drivers
-

* tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  drivers: soc: xilinx: Add ZynqMP PM driver
  firmware: xilinx: Implement ZynqMP power management APIs
  dt-bindings: soc: Add ZynqMP PM bindings
  nvmem: zynqmp: Added zynqmp nvmem firmware driver
  dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
  firmware: xilinx: Add zynqmp_pm_get_chipid() API
  reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.
  dt-bindings: reset: Add bindings for ZynqMP reset driver
  firmware: xilinx: Add reset API's

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 17:16:45 +01:00
Neil Armstrong be3d960b0a dt-bindings: clk: add G12A AO Clock and Reset Bindings
Add bindings for the Amlogic G12A AO Clock and Reset controllers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190212162859.20743-2-narmstrong@baylibre.com
2019-02-13 09:49:17 +01:00
Jerome Brunet dbfc54534d dt-bindings: reset: meson: add g12a bindings
Add device tree bindings for the reset controller of g12a SoC family.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-08 17:31:33 +01:00
Nava kishore Manne 3f1b66be4a dt-bindings: reset: Add bindings for ZynqMP reset driver
Add documentation to describe Xilinx ZynqMP reset driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-29 14:07:10 +01:00
Andrey Smirnov 4cab5bf616 dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
The driver now supports i.MX8MQ, so update bindings accordingly.

Cc: p.zabel@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: l.stach@pengutronix.de
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28 11:16:04 +01:00
Jerome Brunet 3705add0b7 dt-bindings: reset: meson-axg: fix SPDX license id
As reported, the SPDX license id is not placed correctly and the variant
of the BSD License used should be specified.

Fixes: c16292578f ("dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-01-16 12:50:27 -06:00
Mesih Kilinc 3d737ddbe7
dt-bindings: clock: Add Allwinner suniv F1C100s CCU
Add compatiple string for Allwinner suniv F1C100s CCU.
Add clock and reset definitions.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-04 08:41:13 +01:00
Jernej Skrabec b9f9e9b8e4
dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description
This commit adds necessary description and dt includes for H6 DE3 clock.
It is very similar to others, but memory region has some additional
registers not found in DE2.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05 10:22:02 +01:00
Linus Torvalds 519f64bf15 This time it looks like a quieter release cycle in the clk tree. I guess that's
because of summer time holidays/vacations. The biggest change in the diffstat
 is in the Qualcomm clk driver, where they got support for CPUs and handful of
 SoCs. After that, the at91 driver got a major rewrite for newer DT bindings
 that should make things easier going forward and the TI code moved to a
 clockdomain based design. The long tail is mostly small driver updates for
 newer clks and some simpler SoC clock drivers such as the Hisilicon and imx
 support.
 
 In the core framework, we only have two small changes this time. One is a new
 clk API to get all clks for a device with the bulk clk APIs. This allows
 drivers that don't care about doing anything besides turning on all the clks to
 just clk_get() them all and turn them on. The other change is the beginning of
 a way to support save and restore of clk settings in the clk framework. TI is
 the only user right now, but we will want to expand upon this design in the
 future to support more save and restore of clk registers.  At least this gets
 us started and works well enough for one SoC, but there's more work in the
 future.
 
 Core:
  - clk_bulk_get_all() API and friends to get all the clks for a device
  - Basic clk state save/restore hooks
 
 New Drivers:
  - Renesas RZ/A2 (R7S9210) SoC, including early clocks
  - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
  - Rensas RZ/G2M (r8a774a1) SoC
  - Qualcomm Krait CPU clk support
  - Qualcomm QCS404 GCC support
  - Qualcomm SDM660 GCC support
  - Qualcomm SDM845 camera clock controller
  - Ingenic jz4725b CGU
  - Hisilicon 3670 SoC support
  - TI SCI clks on K3 SoCs
  - iMX6 MMDC clks
  - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs
 
 Updates:
  - Rework at91 PMC clock driver for new DT bindings
  - Nvidia Tegra clk driver MBIST workaround fix
  - S2RAM support for Marvell mvebu periph clks
  - Use updated printk format for OF node names
  - Fix TI code to only search DT subnodes
  - Various static analysis finds
  - Tag various drivers with SPDX license tags
  - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
  - Only use s2mps11 dt-binding defines instead of redefining them in the driver
  - Add some more missing clks to qcom MSM8996 GCC
  - Quad SPI clks on qcom SDM845
  - Add support for CMT timer clocks on R-Car V3H
  - Add support for SHDI and various timer clocks on R-Car V3M
  - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
  - Amlogic clk-pll driver improvements and updates
  - Amlogic axg audio controller system clocks
  - Register Amlogic meson8b clock controller early
  - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
  - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
  - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
  - Remove obsoleted Exynos4212 ISP clock definitions
  - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
  - TI RTC+DDR sleep mode support for clock save/restore
  - Allwinner A64 display engine support and fixes
  - Allwinner A83t display engine support and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvY4ysRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVaDBAA3Wv/rsCn4FJ2ZgIWYWQqr69lAWDcBVVe
 4nNbFqzEmRoml8e+XOfVFwnbsai4B5ALVxyMnRlkDyxQ5TFQtF957U12Pf8upPa5
 R447YBt4tw40NCj8u5KNAaBmYYHdmXXDvsBPXyQn+1iy/9R8Is8AcDmv+D2ucuJF
 PPBXOwb+2CstUQhuwlXyvsAw/tqq/rJDVyAZVJUoqXJwlNMjr76V0m0ZXHN6NcyC
 F2SfnzIO4srRteTeKXVFcMU/3uHC3zofEfammSJjGZkk4WHULuPpkD17RMEyBul1
 Ju1S1nzGiKvYME/mmbIcRPNcpry65EVo/wn6IjAcG2m4GaWSq3F6qIttnoc6dnra
 R2VylIEy7HnNcAf8fkQdkd/l+h/TDp3iVrXg0p/rRxRk4Jlc86n2PWO6jtsZv4S+
 NySeRhTb51KrTl72J76LP+dfDWdbeZfkAqr0Qx6QM04OznVYSTHlnQaeM1Nx2SZR
 5+k126NdxDp7xgoJNfq18wzufrlefjuRTg2Kck1YuFuhV4Fjmq7ZC81bSSaakYPh
 /t073TcSZ+VfEYP5hVsl/pjMdFzHcj8pbavhs0UNIYLQNXe494Bm9PyYJOzQKnwz
 Zpbf7V6eplh8J1I03VI8RHviNp340iv2hhz9vp4mNP1vIhgdNiz7R2gn5sLSoFt+
 vei0J0vEzCA=
 =V5aK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time it looks like a quieter release cycle in the clk tree. I
  guess that's because of summer time holidays/vacations. The biggest
  change in the diffstat is in the Qualcomm clk driver, where they got
  support for CPUs and handful of SoCs. After that, the at91 driver got
  a major rewrite for newer DT bindings that should make things easier
  going forward and the TI code moved to a clockdomain based design.

  The long tail is mostly small driver updates for newer clks and some
  simpler SoC clock drivers such as the Hisilicon and imx support.

  In the core framework, we only have two small changes this time.

  One is a new clk API to get all clks for a device with the bulk clk
  APIs. This allows drivers that don't care about doing anything besides
  turning on all the clks to just clk_get() them all and turn them on.

  The other change is the beginning of a way to support save and restore
  of clk settings in the clk framework. TI is the only user right now,
  but we will want to expand upon this design in the future to support
  more save and restore of clk registers. At least this gets us started
  and works well enough for one SoC, but there's more work in the
  future.

  Core:
   - clk_bulk_get_all() API and friends to get all the clks for a device
   - Basic clk state save/restore hooks

  New Drivers:
   - Renesas RZ/A2 (R7S9210) SoC, including early clocks
   - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
   - Rensas RZ/G2M (r8a774a1) SoC
   - Qualcomm Krait CPU clk support
   - Qualcomm QCS404 GCC support
   - Qualcomm SDM660 GCC support
   - Qualcomm SDM845 camera clock controller
   - Ingenic jz4725b CGU
   - Hisilicon 3670 SoC support
   - TI SCI clks on K3 SoCs
   - iMX6 MMDC clks
   - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs

  Updates:
   - Rework at91 PMC clock driver for new DT bindings
   - Nvidia Tegra clk driver MBIST workaround fix
   - S2RAM support for Marvell mvebu periph clks
   - Use updated printk format for OF node names
   - Fix TI code to only search DT subnodes
   - Various static analysis finds
   - Tag various drivers with SPDX license tags
   - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
   - Only use s2mps11 dt-binding defines instead of redefining them in the driver
   - Add some more missing clks to qcom MSM8996 GCC
   - Quad SPI clks on qcom SDM845
   - Add support for CMT timer clocks on R-Car V3H
   - Add support for SHDI and various timer clocks on R-Car V3M
   - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
   - Amlogic clk-pll driver improvements and updates
   - Amlogic axg audio controller system clocks
   - Register Amlogic meson8b clock controller early
   - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
   - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
   - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
   - Remove obsoleted Exynos4212 ISP clock definitions
   - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
   - TI RTC+DDR sleep mode support for clock save/restore
   - Allwinner A64 display engine support and fixes
   - Allwinner A83t display engine support and fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits)
  clk: qcom: Remove unused arrays in SDM845 GCC
  clk: fixed-rate: fix of_node_get-put imbalance
  clk: s2mps11: Add used attribute to s2mps11_dt_match
  clk: qcom: gcc-sdm660: Add MODULE_LICENSE
  clk: qcom: Add safe switch hook for krait mux clocks
  dt-bindings: clock: Document qcom,krait-cc
  clk: qcom: Add Krait clock controller driver
  dt-bindings: arm: Document qcom,kpss-gcc
  clk: qcom: Add KPSS ACC/GCC driver
  clk: qcom: Add support for Krait clocks
  clk: qcom: Add IPQ806X's HFPLLs
  clk: qcom: Add MSM8960/APQ8064's HFPLLs
  dt-bindings: clock: Document qcom,hfpll
  clk: qcom: Add HFPLL driver
  clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  ARM: Add Krait L2 register accessor functions
  clk: imx6q: add mmdc0 ipg clock
  clk: imx6sl: add mmdc ipg clocks
  clk: imx6sll: add mmdc1 ipg clock
  clk: imx6sx: add mmdc1 ipg clock
  ...
2018-10-31 11:08:30 -07:00
Linus Torvalds b22b6beae6 ARM: SoC driver updates for 4.17
The most noteworthy SoC driver changes this time include:
 
 - The TEE subsystem gains an in-kernel interface to access the TEE
   from device drivers.
 
 - The reset controller subsystem gains a driver for the Qualcomm
   Snapdragon 845 Power Domain Controller.
 
 - The Xilinx Zynq platform now has a firmware interface for its
   platform management unit. This contains a firmware "ioctl" interface
   that was a little controversial at first, but the version we merged
   solved that by not exposing arbitrary firmware calls to user space.
 
 - The Amlogic Meson platform gains a "canvas" driver that is used
   for video processing and shared between different high-level drivers.
 
 The rest is more of the usual, mostly related to SoC specific power
 management support and core drivers in drivers/soc:
 
 - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
   features related to power and reset control.
 
 - The Mediatek mt8183 and mt6765 SoC platforms gain support for
   their respective power management chips.
 
 - A new driver for NXP i.MX8, which need a firmware interface for
   power management.
 
 - The SCPI firmware interface now contains support estimating power
   usage of performance states
 
 - The NVIDIA Tegra "pmc" driver gains a few new features, in particular
   a pinctrl interface for configuring the pads.
 
 - Lots of small changes for Qualcomm, in particular the "smem"
   device driver.
 
 - Some cleanups for the TI OMAP series related to their sysc
   controller.
 
 Additional cleanups and bugfixes in SoC specific drivers include the
 Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1zEhAAoJEGCrR//JCVInnYQP/1pPXWsR/DV4COf4kGJFSAFn
 EfHXJM1vKtb7AWl6SClpHFlUMt+fvL+dzDNJ9aeRr2GjcuWfzKDcrBM1ZvM70I31
 C1Oc3b6OXEERCozDpRg/Vt8OpIvvWnVpaVffS9E5y6KqF8KZ0UbpWIxUJ87ik44D
 UvNXYOU/LUGPxR1UFm5rm2zWF4i+rBvqnpVaXbeOsXsLElzxXVfv2ymhhqIpo2ws
 o6e00DSjUImg8hLL4HCGFs2EX1KSD+oFzYaOHIE0/DEaiOnxVOpMSRhX2tZ+tRRb
 DekbjL+wz5gOAKJTQfQ2sNNkOuK8WFqmE5G0RJ0iYPXuNsB/17UNb2bhTJeqGdcD
 dqCQBLQuDUD2iHJ/d4RK5Kx3a8h2X63n5bdefgF5UX/2RBpXwFk1QtHr8X0DuY8c
 o/dPGFNBOn3egzMyXrD5VEtnaTwK1Y6/h09qfuOOF1ZuYDmELKRkWMV9l8dIsvd8
 ANjaw5B8MOUAf8DccBmPgUGu0XLCDyuFGqNVd9Kj5u3az+tyggIsgkEjWg1pxTv0
 7dDDyv4Ara1V1HVDZ23l3CgmYCZQx2R/vdpX/DjuDPGEHGjZ5s2TW8P6oegdxtIh
 LcTonNoTsRYzMrGD/aqhG/8fYsAScXePa3CLKl1Hrl+wFVV0XcaggH23GwD/k+7S
 eDBrEzLkOTxM+WXvsvKY
 =c/PQ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...
2018-10-29 15:16:01 -07:00
Manivannan Sadhasivam a35bcf7c7f dt-bindings: reset: Add binding constants for Actions Semi S900 RMU
Add device tree binding constants for Actions Semi S900 SoC Reset
Management Unit (RMU).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:15 -07:00
Manivannan Sadhasivam 73a5e67efa dt-bindings: reset: Add binding constants for Actions Semi S700 RMU
Add device tree binding constants for Actions Semi S700 SoC Reset
Management Unit (RMU).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:01 -07:00
Leonard Crestez de24832709 reset: imx7: Add PCIE_CTRL_APPS_TURNOFF
This is required for the imx pci driver to send the PME_Turn_Off TLP.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
2018-10-05 09:56:19 +01:00
Sibi Sankar 032f11638f dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
Add PDC Global (Power Domain Controller) binding for SDM845 SoCs.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-05 10:33:28 +02:00
Jerome Brunet 5338073561 reset: meson: add dt-bindings for meson-axg audio arb
Add dt-bindings for the audio memory arbiter found on Amlogic's
A113 based SoCs

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20 17:50:24 +02:00
Sibi Sankar b79df1ec22 dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs
Add SDM845 AOSS (always on subsystem) reset controller binding

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16 12:15:38 +02:00
Stephen Boyd b2ac878acd Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', 'clk-davinci' and 'clk-meson' into clk-next
* clk-davinci-psc-da830:
  clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration

* clk-renesas:
  clk: renesas: cpg-mssr: Add support for R-Car E3
  clk: renesas: Add r8a77990 CPG Core Clock Definitions
  clk: renesas: rcar-gen2: Centralize quirks handling
  clk: renesas: r8a77980: Correct parent clock of PCIEC0
  clk: renesas: r8a7794: Fix LB clock divider
  clk: renesas: r8a7792: Fix LB clock divider
  clk: renesas: r8a7791/r8a7793: Fix LB clock divider
  clk: renesas: r8a7745: Fix LB clock divider
  clk: renesas: r8a7743: Fix LB clock divider
  clk: renesas: cpg-mssr: Add r8a77470 support
  clk: renesas: Add r8a77470 CPG Core Clock Definitions
  clk: renesas: r8a77965: Add MSIOF controller clocks

* clk-at91-recalc:
  clk: at91: PLL recalc_rate() now using cached MUL and DIV values

* clk-davinci:
  clk: davinci: Fix link errors when not all SoCs are enabled
  clk: davinci: psc: allow for dev == NULL
  clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE
  clk: davinci: pll: allow dev == NULL
  clk: davinci: psc-dm365: fix few clocks
  clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled
  clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups
  clk: davinci: pll-dm355: fix SYSCLKn parent names
  clk: davinci: pll-dm355: drop pll2_sysclk2

* clk-meson:
  clk: meson: axg: let mpll clocks round closest
  clk: meson: mpll: add round closest support
  clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL
  clk: meson: use SPDX license identifiers consistently
  clk: meson: drop CLK_SET_RATE_PARENT flag
  clk: meson-axg: Add AO Clock and Reset controller driver
  clk: meson: aoclk: refactor common code into dedicated file
  clk: meson: migrate to devm_of_clk_add_hw_provider API
  clk: meson: gxbb: add the video decoder clocks
  clk: meson: meson8b: add support for the NAND clocks
  dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
  dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
  clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks
  dt-bindings: clock: meson8b: export the NAND clock
2018-06-04 12:37:41 -07:00
Stephen Boyd 45ba387511 Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' and 'clk-qcom-mmagic' into clk-next
* clk-allwinner:
  clk: sunxi-ng: r40: export a regmap to access the GMAC register
  clk: sunxi-ng: r40: rewrite init code to a platform driver
  clk: sunxi-ng: add support for H6 PRCM CCU

* clk-rockchip:
  clk: rockchip: remove deprecated gate-clk code and dt-binding
  clk: rockchip: use match_string() helper

* clk-tegra:
  clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20
  clk: tegra20: Correct parents of CDEV1/2 clocks
  clk: tegra20: Add DEV1/DEV2 OSC dividers

* clk-berlin:
  clk: berlin: switch to SPDX license identifier

* clk-qcom-mmagic:
  clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled
  clk: qcom: Register the gdscs before the clocks
  clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
2018-06-04 12:27:44 -07:00
Sean Wang 5eb57e1e7a dt-bindings: reset: mediatek: add entry for Mali-450 node to refer
Just add binding for a required reset referenced by Mali-450 on MT7623
or MT2701 SoC.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15 15:21:46 -07:00
Yixun Lan 9c7aea8e17 dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
Add dt-bindings headers for the Meson-AXG's AO clock and
reset controller.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15 14:07:11 +02:00
Icenowy Zheng b7c7b05065 clk: sunxi-ng: add support for H6 PRCM CCU
The H6 has clock/reset controls in PRCM part, like old SoCs such as H3
and A64. However, the PRCM CCU is rearranged; the register arragement
is now similar to the main CCU of H6, and the PRCM now has two APB
buses to control -- one is clocked from AHB clock derivde from AR100
clock, the other is clocked from the same mux with AR100 clock.
Therefore a new driver is written for it.

As there's no official document about the PRCM in H6, all the information
are indirectly collected from BSP and parts of the document, and the
information source is noted as comments in the driver's source code. If
reliable information is provided furtherly, the driver needs to be
rechecked.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-04 17:05:46 +02:00
Linus Torvalds ca4e7c5120 The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported
 with a custom implementation of the clk API in the arch port instead of in
 the CCF. With this driver merged we're one step closer to having a single
 clk API implementation.
 
 The other large diff is from the Amlogic clk driver that underwent some
 major surgery to use regmap. Beyond that, the biggest hitter is Samsung
 which needed some reworks to properly handle clk provider power domains
 and a bunch of PLL rate updates.
 
 The core framework was fairly quiet this round, just getting some cleanups
 and small fixes for some of the more esoteric features. And the usual
 set of driver non-critical fixes, cleanups, and minor additions are here as
 well.
 
 Core:
  - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
  - debugfs ops macroized to shave some lines of boilerplate code
  - Always calculate the phase instead of caching it in clk_get_phase()
  - More __must_check on bulk clk APIs
 
 New Drivers:
  - TI's Davinci family of SoCs
  - Intel's Stratix10 SoC
  - stm32mp157 SoC
  - Allwinner H6 CCU
  - Silicon Labs SI544 clock generator chip
  - Renesas R-Car M3-N and V3H SoCs
  - i.MX6SLL SoCs
 
 Removed Drivers:
  - ST-Ericsson AB8540/9540
 
 Updates:
  - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
  - STM32F469 DSI and STM32F769 sdmmc2 support
  - GPIO clks can sleep now
  - Spreadtrum SC9860 RTC clks
  - Nvidia Tegra MBIST workarounds and various minor fixes
  - Rockchip phase handling fixes and a memory leak plugged
  - Renesas drivers switch to readl/writel from clk_readl/clk_writel
  - Renesas gained CPU (Z/Z2) and watchdog support
  - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
  - Qualcomm PM8921 PMIC XO buffers
  - Amlogic migrates to regmap APIs
  - TI Keystone clk latching support
  - Allwinner H3 and H5 video clk fixes
  - Broadcom BCM2835 PLLs needed another bit to enable
  - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
  - i.MX6UL/ULL epdc_podf support
  - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy
 Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy
 /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF
 MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL
 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+
 /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf
 NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K
 blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD
 wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl
 +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb
 Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf
 X6P2pfkBqkg=
 =ys4O
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...
2018-04-13 15:51:06 -07:00
Linus Torvalds 38c23685b2 ARM: SoC driver updates for 4.17
The main addition this time around is the new ARM "SCMI" framework,
 which is the latest in a series of standards coming from ARM to do power
 management in a platform independent way. This has been through many
 review cycles, and it relies on a rather interesting way of using the
 mailbox subsystem, but in the end I agreed that Sudeep's version was
 the best we could do after all.
 
 Other changes include:
 
 - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
   which makes more sense. Similarly, the performance monitoring
   portion of the CCI driver are moved the same way and cleaned up
   a little more.
 
 - a series of updates to the SCPI framework
 
 - support for the Mediatek mt7623a SoC in drivers/soc
 
 - support for additional NVIDIA Tegra hardware in drivers/soc
 
 - a new reset driver for Socionext Uniphier
 
 - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
   drivers/firmware and drivers/reset across platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxiNzAAoJEGCrR//JCVInYhYP/2kPhc5t/kszA1bcklcbO9dY
 eX37Ra/RR4yQ5yeQZVIZ4UkUovxk9PmG2tM4K5oJaTDsz5pPEgavVOOr3sbfj6vb
 4O9auTeysEQlHcbVdNFum0YS2gUY2YD7D12DTRorotLxCqod184ccWXq0XGfIWaY
 l3YRrcL/lPlqmyS3z/GNx9oNygOMUzEfXfIQYICyzHuYiLBUGnkKC1vIb+Hx1TDq
 Cxk++AUqH13Mss24O2A2QQh+oBHj2BybDLLqwcC5PSpsUbFrVCfzG54l43mig32T
 NOxV0Qnml2wAtU4H0QcgtSgwRimHD0YOiX8ssquvDDiqTqM5G+llSTGkEbYe+AUW
 4GIZYoBOwGkfEXS+tyymHe9yfc5h1OLYAeFU1jRm723c7phanuu67rPn35YC8UMK
 zSql10JpkAGNzMikrxxb6wnis951w2UFlzhgZQ6ItA/nRq3l+oEQA0Qiljv965nz
 DVLsD5+gdhK6GBctkzlsD5HFn6GjM8JilnsOVPHD765nKnVBSxKiXRLV228XVug2
 rChF1FhQqLnM54jCMqHZX5fS9SbSgtYswHqIXpVw6GmJkqq/Ly10yGR0vuWD+uyn
 BV7q5AKpGrwm6wZkMM2uZ1VdUtWzn856AbkqrvX/QhmJcX4McuqaLUrC8bSOj1ty
 KeVil0akq3nU+xHl5Ojs
 =Pmsx
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main addition this time around is the new ARM "SCMI" framework,
  which is the latest in a series of standards coming from ARM to do
  power management in a platform independent way.

  This has been through many review cycles, and it relies on a rather
  interesting way of using the mailbox subsystem, but in the end I
  agreed that Sudeep's version was the best we could do after all.

  Other changes include:

   - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
     which makes more sense. Similarly, the performance monitoring
     portion of the CCI driver are moved the same way and cleaned up a
     little more.

   - a series of updates to the SCPI framework

   - support for the Mediatek mt7623a SoC in drivers/soc

   - support for additional NVIDIA Tegra hardware in drivers/soc

   - a new reset driver for Socionext Uniphier

   - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
     drivers/firmware and drivers/reset across platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
  amlogic: meson-gx-socinfo: Update soc ids
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  cpufreq: scmi: add thermal dependency
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
  ...
2018-04-05 21:29:35 -07:00
Gabriel Fernandez dae5af9762 dt-bindings: reset: add STM32MP1 resets
This patch adds the reset binding entry for STM32MP1

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27 10:44:03 +02:00
Icenowy Zheng 524353ea48
clk: sunxi-ng: add support for the Allwinner H6 CCU
The Allwinner H6 SoC has a CCU which has been largely rearranged.

Add support for it in the sunxi-ng CCU framework.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-18 21:17:07 +01:00
Mikko Perttunen 5425fb15d8 arm64: tegra: Add Tegra194 chip device tree
Add the chip-level device tree, including binding headers, for the
NVIDIA Tegra194 "Xavier" system-on-chip. Only a small subset of devices
are initially available, enough to boot to UART console.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 14:31:13 +01:00
Yixun Lan c16292578f dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller
Add DT bindings for the Meson-AXG SoC Reset Controller include file,
and also slightly update documentation.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-27 09:16:40 +01:00
Linus Torvalds cf9b0772f2 ARM: SoC driver updates for v4.15
This branch contains platform-related driver updates for ARM and ARM64,
 these are the areas that bring the changes:
 
 New drivers:
  - Driver support for Renesas R-Car V3M (R8A77970)
  - Power management support for Amlogic GX
  - A new driver for the Tegra BPMP thermal sensor
  - A new bus driver for Technologic Systems NBUS
 
 Changes for subsystems that prefer to merge through arm-soc:
  - The usual updates for reset controller drivers from Philipp Zabel,
    with five added drivers for SoCs in the arc, meson, socfpa, uniphier
    and mediatek families.
  - Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
    Heiner Kallweit and Lorenzo Pieralisi.
 
 Changes specific to some ARM-based SoC
  - The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
    on ARM as well.
  - Several changes for power management on Broadcom SoCs
  - Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
  - Minor Cleanups for Samsung, TI OMAP SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDggbAAoJEGCrR//JCVInIeQQAN1MDyO1UaWiFYnbkVOgzFcj
 dqbFOc41DBE/90JoBWE8kR/rjyF83OqztiaYpx9viu2qMMBZVcOwxhCUthWK59c/
 IujYdw4zGevLscF+jdrLbXgk97nfaWebsHyTAF307WAdZVJxiVGGzQEcgm71d6Zp
 CXjLiUii4winHUMK9FLRY2st0HKAevXhuvZJVV432+sTg3p7fGVilYeGOL5G62WO
 zQfCisqzC5q677kGGyUlPRGlHWMPkllsTTnfXcmV/FUiGyVa3lUWY5sEu+wCl96O
 U1ffPENeNj/A/4fa1dbErtbiNnC2z/+jf+Dg7Cn8w/dPk4Suf0ppjP8RqIGyxmDl
 Wm/UxbwDClxaeF4GSaYh2yKgGRJMH5N87bJnZRINE5ccGiol8Ww/34bFG0xNnfyh
 jSAFAc318AFG62WD4lvqWc7LSpzOYxp/MNqIFXKN692St/MJLkx8/q0nTwY1qPY0
 3SELz9II3hz+3MfDRqtRi7hZpkgHgQ+UG7S5+Xhmqrl309GOEldCjPVJhhXxWoxK
 ZPtZOuyYvGhIC+YAnHaN6lUjADIdNJZHwbuXFImx85oKHVofoxHbcni5vk8Uu7z1
 sQNYOtdDGaPG/2u9RJdJlPg/jIgLKxxt/Xm9TYVawpZ5hFANhBTtIq5ExCRAil68
 j9sMOrpZ1DzCQyR7zN2v
 =qDhq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..
2017-11-16 16:05:01 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sean Wang 7f4fbf79f4 reset: mediatek: add reset controller dt-bindings required header for MT7622 SoC
Add the reset controller dt-bindings exported from infracfg, pericfg,
hifsys and ethsys which could be found on MT7622 SoC. So that we can
reference them from within a device-tree file.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-04 12:13:29 +02:00
Vineet Gupta 13541226dc ARC: reset: remove the misleading v1 suffix all over
There is no plan yet to do a v2 board. And even if we were to do it only
some IPs would actually change, so it be best to add suffixes at that
point, not now !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18 13:02:03 +02:00
Linus Torvalds f60a2abfdb The diff is dominated by the Allwinner A10/A20 SoCs getting converted to
the sunxi-ng framework. Otherwise, the heavy hitters are various drivers
 for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other
 new clk drivers in here too but overall this is just a bunch of clk
 drivers for various different pieces of hardware and a collection of
 non-critical fixes for clk drivers.
 
 New Drivers:
  - Allwinner R40 SoCs
  - Renesas R-Car Gen3 USB 2.0 clock selector PHY
  - Atmel AT91 audio PLL
  - Uniphier PXs3 SoCs
  - ARC HSDK Board PLLs
  - AXS10X Board PLLs
  - STMicroelectronics STM32H743 SoCs
 
 Removed Drivers:
  - Non-compiling mb86s7x support
 
 Updates:
  - Allwinner A10/A20 SoCs converted to sunxi-ng framework
  - Allwinner H3 CPU clk fixes
  - Renesas R-Car D3 SoC
  - Renesas V2H and M3-W modules
  - Samsung Exynos5420/5422/5800 audio fixes
  - Rockchip fractional clk approximation fixes
  - Rockchip rk3126 SoC support within the rk3128 driver
  - Amlogic gxbb CEC32 and sd_emmc clks
  - Amlogic meson8b reset controller support
  - IDT VersaClock 5P49V5925/5P49V6901 support
  - Qualcomm MSM8996 SMMU clks
  - Various 'const' applications for struct clk_ops
  - si5351 PLL reset bugfix
  - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
  - Assorted Tegra clk driver fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJZuIAQAAoJEK0CiJfG5JUlUMQQAKFwCZRfTzz0m9jJ9s1XZSR/
 vldNAEUGm+Mz0W84xIzFqaT0UI1+SJK4e9Du+EN6phcCD5yVB0JS2EtRa84Bku/i
 Zy6AYSUNbGjx94HPwIq1hKt+UOIfBiNbJKMnkoCbEyYPA/TiWzr8JR5GyLjwYhPq
 IZHSvKqUKM3h2nr+MtpFJIIk8DlkLARRca4CCqa5i2Oqj6B8rjQQAq7TaLAM3ASN
 tSFIW2vdmWD+om2L57WHhwBgaYnUB4jBCRWkFZRsO4ZIRgm4VpePmosy2UTZ7fqb
 kEaW2bPuv65zUHpvjHG6yXo+yh0yk1fBsXG/joXgJ4oOmNzsIgnCZzPnGUC1ccms
 QdK/qhdIXsdgiR2DZtYuzUHji8+TNIPPjfAFyJjUwxDBXpqzXvsvltx2a1hg/rUP
 VDvTL2OnoGtrW2bXPufCkxBsyejJ4RqC5riMJws5xgMkqKKUajiLovPeuL6+8kU+
 ncqWYiIkEvHNKpmW511G/g+ClLk89zgXfxKFWWR+iDjSvA0hgaiRj1V3C2HIyS8f
 CLpalf6ao2+O008rUiaiqJyxWuwLujcdYokay2HXvTYc45rXrVwvlaDajxqs2eer
 lekUA4ZbX2g6qvB0lna6PNlv8JLQ1XPdzhWD2eeQIi7JgVSgwg++kUJqglsuai56
 eg5zNo6891GL9zFW10/A
 =0JbT
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The diff is dominated by the Allwinner A10/A20 SoCs getting converted
  to the sunxi-ng framework. Otherwise, the heavy hitters are various
  drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
  some other new clk drivers in here too but overall this is just a
  bunch of clk drivers for various different pieces of hardware and a
  collection of non-critical fixes for clk drivers.

  New Drivers:
   - Allwinner R40 SoCs
   - Renesas R-Car Gen3 USB 2.0 clock selector PHY
   - Atmel AT91 audio PLL
   - Uniphier PXs3 SoCs
   - ARC HSDK Board PLLs
   - AXS10X Board PLLs
   - STMicroelectronics STM32H743 SoCs

  Removed Drivers:
   - Non-compiling mb86s7x support

  Updates:
   - Allwinner A10/A20 SoCs converted to sunxi-ng framework
   - Allwinner H3 CPU clk fixes
   - Renesas R-Car D3 SoC
   - Renesas V2H and M3-W modules
   - Samsung Exynos5420/5422/5800 audio fixes
   - Rockchip fractional clk approximation fixes
   - Rockchip rk3126 SoC support within the rk3128 driver
   - Amlogic gxbb CEC32 and sd_emmc clks
   - Amlogic meson8b reset controller support
   - IDT VersaClock 5P49V5925/5P49V6901 support
   - Qualcomm MSM8996 SMMU clks
   - Various 'const' applications for struct clk_ops
   - si5351 PLL reset bugfix
   - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
   - Assorted Tegra clk driver fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
  clk: si5351: fix PLL reset
  ASoC: atmel-classd: remove aclk clock
  ASoC: atmel-classd: remove aclk clock from DT binding
  clk: at91: clk-generated: make gclk determine audio_pll rate
  clk: at91: clk-generated: create function to find best_diff
  clk: at91: add audio pll clock drivers
  dt-bindings: clk: at91: add audio plls to the compatible list
  clk: at91: clk-generated: remove useless divisor loop
  clk: mb86s7x: Drop non-building driver
  clk: ti: check for null return in strrchr to avoid null dereferencing
  clk: Don't write error code into divider register
  clk: uniphier: add video input subsystem clock
  clk: uniphier: add audio system clock
  clk: stm32h7: Add stm32h743 clock driver
  clk: gate: expose clk_gate_ops::is_enabled
  clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
  clk: uniphier: add PXs3 clock data
  clk: hi6220: change watchdog clock source
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  clk: cs2000: Add cs2000_set_saved_rate
  ...
2017-09-13 11:04:14 -07:00
Linus Torvalds e90937e756 ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
 window. This time around, 559 patches affecting both 32- and 64-bit
 platforms.
 
 Changes are too many to list individually, but some of the larger ones:
 
 New platform/SoC support:
 
  - Automotive:
    + Renesas R-Car D3 (R8A77995)
    + TI DT76x
    + MediaTek mt2712e
  - Communication-oriented:
    + Qualcomm IPQ8074
    + Broadcom Stingray
    + Marvell Armada 8080
  - Set top box:
    + Uniphier PXs3
 
 Besides some vendor reference boards for the SoC above, there are also several
 new boards/machines:
 
  - TI AM335x Moxa UC-8100-ME-T open platform
  - TI AM57xx Beaglebone X15 Rev C
  - Microchip/Atmel sama5d27 SoM1 EK
  - Broadcom Raspberry Pi Zero W
  - Gemini-based D-Link DIR-685 router
  - Freescale i.MX6:
    + Toradex Apalis module + Apalis and Ixora carrier boards
    + Engicam GEAM6UL Starter Kit
  - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
  - Mediatek mt7623-based BananaPi R2
  - Several Allwinner-based single-board computers:
   + Cubietruck plus
   + Bananapi M3, M2M and M64
   + NanoPi A64
   + A64-OLinuXino
   + Pine64
  - Rockchip RK3328 Pine64/Rock64 board support
  - Rockchip RK3399 boards:
   + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
   + Theobroma Systems RK3399-Q7 SoM
  - ZTE ZX296718 PCBOX Board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdtjAAoJEIwa5zzehBx3PzgP/iCQyUk5wklG9E5YNl8a9m/o
 djBkelabTm52s5ZTu6Awsq5rx8jUMqcb0vo+9v9yPWFG6On2oTZyZ/rE1Wbj3+gG
 +ENVyRgxmzYDTXqQLiu1UOV9wSA0gHwQCRZvE7i32NNfLu+tAsvu9e/AuznQ1xhR
 4G7dGCRRlRkZkrVKrJ7JjklmW578pFQkZLmz8K2nWqwh1tKpK3fY19SrwUKx+YCR
 tnMPYAPjB5zxR9tfcDS4FUKdiC7dMiMzZNGiYl5a26X6wsNR7xYtNzFMaGZn1ecG
 PwOS+DAnj8J+AfpQBLWu9xytHbJdqITRuNcF+OXNVW9TKmb0syf7VgRUDkhjIMxP
 aGZc4Q6PwgTRwnX+w6fTzJTyk+uXtieCicZaaZ1jlgcQq0pfbzJ1vZMpq4aoVlxU
 mS84i1bd8AiavmHuyIRNB3/T4aAsVhTUIBndXluKV8yWroXhAukfI1YmGr1Eux7C
 fy5pPeDqk9lXR3bqIhfnaLoVsApEXTOWMC8X48vwfaQHiCGR9JJwpfsGcaNi1bri
 Col1qRzkXWGA6KqTWtpo+o12rYuMGc0mpZTCmejKuBoxMXOU+wLyJYgaxa7pyesX
 S5rLaIe2l9ppXHjjEERp7AzczzLS5W20Tez5vYnZAQb1dYuJzwXwiATt8NT+XG3V
 Wu92UwUfjxYk8vGz48ph
 =R45j
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...
2017-09-10 20:54:48 -07:00
Stephen Boyd 056db9d7c4 Allwinner clock changes for 4.14, part 3
Conversion of the last two SoCs (A10, A20) to the sunxi-ng framework.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZno1VAAoJEBx+YmzsjxAgJ4gQALqulaGhH4rEjW5oouZ8JJwd
 O3s4FFazKMXlgV1q/LYbf1eYrUQhJbr4tHTbCbqm3klaMTz6jOAnRlTjSKkoIssA
 jrtbP6MzHcWE6RnaIA96z45T2p5ZyMGt18/ZgpdQlmmQ9GcV27I+gQs0VsLLPMY0
 PGlG+r6qDnwHbCaEymvbLG16/xLVXHmqXrWQ/9GRWRK1fQ7ffgGw80X1ASuflSnE
 fJCqfhUc1SG3ZGho0xZXFKUvifoaHg1gyFQrrP5mVhYSeUogYSMrvQim/RwwxSVx
 6GkHmNj6O15UvD2A7Y71VqjvjNi5gB054J18Nl8PxFJyHPa33ocC5DkbOXEJI6jL
 PESH29A6myS+v2cY6lm1PVdWIGrDNcCgocjsZSeyn4xKU6oPmFHzlISt0hZPPoQ3
 lxqWZrH9rUeVLVAkX2XzMhi4xHc6wZF2eTsp+e0ylDL09c//Dt2ojKgWoN7DeUlN
 sRgjcPlGB5KRYMYi1ChH5RSsH8h8S4wzF2mSESkGjLCZ82r1BerRBjvaF1MaIEGd
 xm5yNBw4Y3HL+AoRSEZiZ9FjERfejiI3Q/oqgcLdAGiYD0pDWMU+wjrfHXnQ1yOj
 HITZaabZRf19D+pNdLpMlzp1UmQQbflCDfOnXaz1r1q6yuWdXvXmgIL2CfQGPqCD
 Yn+FyX0JEE6yq4lvJ4fA
 =Wce+
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next

Pull more Allwinner clock changes from Maxime Ripard:

 * Conversion of the last two SoCs (A10, A20) to the sunxi-ng framework

* tag 'sunxi-clk-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: Add sun4i/sun7i CCU driver
  dt-bindings: List devicetree binding for the CCU of Allwinner A10
  dt-bindings: List devicetree binding for the CCU of Allwinner A20
2017-08-31 10:57:34 -07:00
Priit Laes c84f5683f6 clk: sunxi-ng: Add sun4i/sun7i CCU driver
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-24 10:15:54 +02:00
Stephen Boyd 1fea70bc18 Allwinner clock changes for 4.14, round 2
Usual improvements:
 
   - Added support for fixed post-divider on divider and NKM-style clocks
 
   - Added driver for R40 CCU
 
 Non critical fixes (from round 1):
 
   - Fix sunxi-ng/ccu-sunxi-r.h header file guard macro typo
 
   - Make fractional clock modes really used and correctly configured
 
   - Make H3 cpu clock rate change correctly to be used with cpufreq
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlmaR6AOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDC8YA//aLULoosISnyHs+wKowVHuDb7/mQ82O1gOAxC
 oE/vscd/WCRm7A5tfy+xHfajX/YRf32Qc09wB7fxUF4R0lgkO9QjUO0yX74a6bPh
 HCh/+bcmeNl9TZAYpTs72Q4nfc1x63OZwxMqTRnBmh3cevyIBJiFvqPjoMeD+Ari
 n32QEBgGE+A8bWshVFpNFyId6iyfMfozSYninIkVkwMGr7QgBgJRK1/5sftyZMR+
 NQ2IGkaUfICnXofF//pNKsH7TN770gyDtFVWjrKZMrEKoP+gp3mawzMpfePKH/O6
 4ihcm5LOo1Kdg5UzRTpQ2B/9fNUn2EvFYT6RuIBfddQcaflT1AzWtNK52j2L/crD
 tFyamcCSsNY5LzeySbVW+pQMRfrq6UCYtssiL7HYEcwMzvv61PfyDtKq5dxtJd0Q
 W8S6wPE/foj0i0JQWs0K70AacGU6XdEanUAtc5r3AsniCwwOtlwnaQqOlE5CiwAo
 HOSItOxX4Y/9QglnntsDyhNUaKpaSiG21XdE3ho3xq1/CS9ED3p5Ljbshem5fnPi
 mPisF6Ca6NVvCZ+sjH2RVvmGyh3d+BPfQLWC/sTamC4rnpDalrMq6IsCOivzbxqQ
 ltkYwUO1nmz5NMloeWYCUWWmLUOECCQu7Mppf2UQxpidrEEY0mbBYFdOlehrlHZT
 bWt2NdQ=
 =DKSp
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next

Pull Allwinner clock changes from Chen-Yu Tsai:

 * Added support for fixed post-divider on divider and NKM-style clocks
 * Added driver for R40 CCU
 * Fix sunxi-ng/ccu-sunxi-r.h header file guard macro typo
 * Make fractional clock modes really used and correctly configured
 * Make H3 cpu clock rate change correctly to be used with cpufreq

* tag 'sunxi-clk-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: support R40 SoC
  dt-bindings: add compatible string for Allwinner R40 CCU
  clk: sunxi-ng: nkm: add support for fixed post-divider
  clk: sunxi-ng: div: Add support for fixed post-divider
  dt-bindings: clock: sunxi-ccu: Add compatibles for sun5i CCU driver
  clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3
  clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Wait for lock when using fractional mode
  clk: sunxi-ng: Make fractional helper less chatty
  clk: sunxi-ng: multiplier: Fix fractional mode
  clk: sunxi-ng: Fix fractional mode for N-M clocks
  clk: sunxi-ng: Fix header guard of ccu-sun8i-r.h
2017-08-23 15:31:48 -07:00
Icenowy Zheng cd030a78f7 clk: sunxi-ng: support R40 SoC
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-19 17:04:37 +08:00
Martin Blumenstingl 0f9b973b65 dt-bindings: clock: meson8b: describe the embedded reset controller
The Amlogic Meson8/Meson8b/Meson8m2 clock controller provides some reset
lines. These are used for example to boot the secondary CPU cores.

This patch describes the reset controller which is embedded into the
clock controller on these SoCs.
A header file is provided which provides preprocessor macros for each
reset line (to make the .dts files easier to read).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-07-31 10:48:39 +02:00
Eugeniy Paltsev e0be864f14 ARC: reset: introduce HSDKv1 reset driver
The HSDK v1 periphery IPs can be reset by accessing some registers
from the CGU block.

The list of available reset lines is documented in the DT bindings.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-07-20 11:48:16 +02:00
Linus Torvalds dddd564dbb This time we've got one core change to introduce a bulk clk_get API,
some new clk drivers and updates for old ones. The diff is pretty
 spread out across a handful of different SoC clk drivers for Broadcom, TI,
 Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the
 introduction of new drivers.
 
 Core:
  - New clk bulk get APIs
  - Clk divider APIs gained the ability to consider a different parent than
    the current one
 
 New Drivers:
  - Renesas r8a779{0,1,2,4} CPG/MSSR
  - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
  - Qualcomm IPQ8074 SoCs
  - Cortina Systems Gemini (SL3516/CS3516)
  - Rockchip rk3128 SoCs
  - Allwinner A83T clk control units
  - Broadcom Stingray SoCs
  - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs
 
 Removed Drivers:
  - Old non-DT version of the Realview clk driver
 
 Updates:
  - Renesas Kconfig/Makefile cleanups
  - Amlogic CEC EE clk support
  - Improved Armada 7K/8K cp110 clk support
  - Rockchip clk id exposing, critical clk markings
  - Samsung converted to clk_hw registration APIs
  - Fixes for Samsung exynos5420 audio clks
  - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJZXujtAAoJEK0CiJfG5JUl8vIQAKbcH3rX+CS4jrg7Hs2Ghnhn
 ZbTf7vZYa6K7iuL7JHITEScAQ8+l0Bl7eWSfJZRt4oUW3Jt4F+AIs8qBofZAWn4M
 m+kDHs/IfAUITZp/unM/ogFfVcboZObjAK/A2yyRVyMxRkIyyUb6r7SDVpCpGyxU
 1YDAdis2M3F5J9CGV/tpmobnksMUlCnJlI0OGtMUnvY6mDkf8Re89sayMnQ/1Mgp
 CL1YwnqZ0L6rT664IMo74bB7UNjXdMZsuCeITkU+hMVq4NMXErKCcn8lHvP9P+uP
 AoZ8bf9WaQ/CglGFeeFrNQGUf+tiTlYxlVvvNFXR5+rmhu/yKxNI67APaupeERVl
 jMISKAC/A+C1j6JVMCqjM3d75F47SzuZQuQY0ZD0DWoqP9PBzV6IyThHIqWrN5O4
 IceLmD8BrwW+h8bs2SIubIygOGMMqGhVi2XaAAWpmRke7JzmSFOOyE3YGPisaBAq
 EcIF2i2jJ6Ja4rClgfQKOsx25MOILsIp/sMU6iC7U1h4NDj8yP5A13n60U6DuZhu
 ttjN+bXugR81R+bWyzC6Zl/KXF83Ka3ZSJs+XblunPRGKt2q6Kj12HBspkWL1QjY
 aLEEg3fpI/ovQoTMXHj7/G1MD60rxoHCuOjBwSWEQBzA1MiHol+ab/mZKfPsy50C
 116G1XJgtgrLxE00iZ6K
 =Yar+
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we've got one core change to introduce a bulk clk_get API,
  some new clk drivers and updates for old ones. The diff is pretty
  spread out across a handful of different SoC clk drivers for Broadcom,
  TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
  the introduction of new drivers.

  Core:
   - New clk bulk get APIs
   - Clk divider APIs gained the ability to consider a different parent
     than the current one

  New Drivers:
   - Renesas r8a779{0,1,2,4} CPG/MSSR
   - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
   - Qualcomm IPQ8074 SoCs
   - Cortina Systems Gemini (SL3516/CS3516)
   - Rockchip rk3128 SoCs
   - Allwinner A83T clk control units
   - Broadcom Stingray SoCs
   - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs

  Removed Drivers:
   - Old non-DT version of the Realview clk driver

  Updates:
   - Renesas Kconfig/Makefile cleanups
   - Amlogic CEC EE clk support
   - Improved Armada 7K/8K cp110 clk support
   - Rockchip clk id exposing, critical clk markings
   - Samsung converted to clk_hw registration APIs
   - Fixes for Samsung exynos5420 audio clks
   - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
     hi3660"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
  clk: gemini: Read status before using the value
  clk: scpi: error when clock fails to register
  clk: at91: Add sama5d2 suspend/resume
  gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
  clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
  clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
  clk: uniphier: provide NAND controller clock rate
  clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
  clk: Add Gemini SoC clock controller
  clk: iproc: Remove __init marking on iproc_pll_clk_setup()
  clk: bcm: Add clocks for Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
  clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
  clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
  clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
  clk: hi6220: add acpu clock
  clk: zx296718: export I2S mux clocks
  clk: imx7d: create clocks behind rawnand clock gate
  clk: hi3660: Set PPLL2 to 2880M
  ...
2017-07-07 12:26:13 -07:00