Commit Graph

1168 Commits

Author SHA1 Message Date
Kornilios Kourtis af60d61fa8 doc: clarification about setting SO_ZEROCOPY
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10 15:01:49 -05:00
Mike Rapoport 2fdd18118d docs-rst: networking: wire up msg_zerocopy
Fix the following 'make htmldocs' complaint:

Documentation/networking/msg_zerocopy.rst:: WARNING: document isn't included in any toctree.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09 12:18:51 -05:00
Linus Torvalds 5bbcc0f595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...
2017-11-15 11:56:19 -08:00
Harald Welte 8983487f5e net: Mention net-next status web page in netdev-FAQ.txt
According to
  https://www.mail-archive.com/netdev@vger.kernel.org/msg177411.html
there is a status page available at
  http://vger.kernel.org/~davem/net-next.html
to obtain the current status of the net-next tree.  Let's add this
information to the netdev FAQ.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 21:11:57 +09:00
Harald Welte 3ba88c477b net: Extend Kernel GTP-U tunneling documentation
* clarify specification references for v0/v1
* add section "APN vs. Network device"
* add section "Local GTP-U entity and tunnel identification"

Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 21:11:57 +09:00
Linus Torvalds 7832681b36 A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
 
   - We have a couple of new helper scripts.  find-unused-docs.sh from Sayli
     Karnic will point out kerneldoc comments that are not actually used in
     the documentation.  Jani Nikula's documentation-file-ref-check finds
     references to non-existing files.
 
   - A new ftrace document from Steve Rostedt.
 
   - Vinod Koul converted the dmaengine docs to RST
 
 Beyond that, it's mostly simple fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCK37AAoJEI3ONVYwIuV63nwQALeqzVwGqqTwiyRyMqgEwMQM
 je/6IurEwTHtyfwtW/mztCfNid1CLTiYZg7RET3/zlHjcUI/9VlV2dbBksGFgoQo
 muHGqhwTJjXYREwjK3FkzrGckRsVZKJgdzmZYgukCCY6Ir7IffwJKYaLOCZN1S/l
 4nBHQpt2nITo0WhdmZjaNRKOQxMA8nN5yGpOIl0neGE6ywIUMgauCCCHhxnOPVWg
 ant1HliS8WR8Tizqt9wQgLCvs5lvklsBFibZPO9LBTPG2Zy3HIO9kb+npUAh2MTl
 j0Wg39zzOFvVVErqErqUIwIuQ9IrfltHrEHYYoruTvDBXBiMKIcwApF+DS+H3WSp
 TnDu3Qif4llM5SZsZGvcjawXNnbck+7SYOe9cyqpylV3SWMWrEX1tbUv6zVuVk+7
 fencYBvEZgkJmWbjDeO/Z4S50STxRTzIxFwZgLft7g/RiHo9HvlubjjwQTqBFjxA
 fVkolN7h69MGkrD8TF19eapyujqSXaNYH0pFYo87JNOjLgYmezUHyvHd8YeZJL31
 Ll0h10HqSNVzJsjFolBMgrC3CcVjsEXdBufu0yVk45sAg9ZiMYOCpwa6Rtp+tfxa
 uIBf1LKzfWSa0ocKx7+sMJt0B/CXwU3AMtsbYGyDhFhR2r3cp1NWBHf5nisz9etD
 2Md9RDFAMLELZurewB9Q
 =H6ud
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.15' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A relatively calm cycle for the docs tree again.

  - The old driver statement has been added to the kernel docs.

  - We have a couple of new helper scripts. find-unused-docs.sh from
    Sayli Karnic will point out kerneldoc comments that are not actually
    used in the documentation. Jani Nikula's
    documentation-file-ref-check finds references to non-existing files.

  - A new ftrace document from Steve Rostedt.

  - Vinod Koul converted the dmaengine docs to RST

  Beyond that, it's mostly simple fixes.

  This set reaches outside of Documentation/ a bit more than most. In
  all cases, the changes are to comment docs, mostly from Randy, in
  places where there didn't seem to be anybody better to take them"

* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
  documentation: fb: update list of available compiled-in fonts
  MAINTAINERS: update DMAengine documentation location
  dmaengine: doc: ReSTize pxa_dma doc
  dmaengine: doc: ReSTize dmatest doc
  dmaengine: doc: ReSTize client API doc
  dmaengine: doc: ReSTize provider doc
  dmaengine: doc: Add ReST style dmaengine document
  ftrace/docs: Add documentation on how to use ftrace from within the kernel
  bug-hunting.rst: Fix an example and a typo in a Sphinx tag
  scripts: Add a script to find unused documentation
  samples: Convert timers to use timer_setup()
  documentation: kernel-api: add more info on bitmap functions
  Documentation: fix selftests related file refs
  Documentation: fix ref to power basic-pm-debugging
  Documentation: fix ref to trace stm content
  Documentation: fix ref to coccinelle content
  Documentation: fix ref to workqueue content
  Documentation: fix ref to sphinx/kerneldoc.py
  Documentation: fix locking rt-mutex doc refs
  docs: dev-tools: correct Coccinelle version number
  ...
2017-11-13 08:25:06 -08:00
Egil Hjelmeland 4b33709d89 net: dsa: lan9303: Documentation: Add missing word "Mbps"
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13 09:59:29 +09:00
Yuchung Cheng 713bafea92 tcp: retire FACK loss detection
FACK loss detection has been disabled by default and the
successor RACK subsumed FACK and can handle reordering better.
This patch removes FACK to simplify TCP loss recovery.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11 18:53:16 +09:00
Maciej Żenczykowski 2210d6b2f2 net: ipv6: sysctl to specify IPv6 ND traffic class
Add a per-device sysctl to specify the default traffic class to use for
kernel originated IPv6 Neighbour Discovery packets.

Currently this includes:

  - Router Solicitation (ICMPv6 type 133)
    ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Neighbour Solicitation (ICMPv6 type 135)
    ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Neighbour Advertisement (ICMPv6 type 136)
    ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Redirect (ICMPv6 type 137)
    ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr()

and if the kernel ever gets around to generating RA's,
it would presumably also include:

  - Router Advertisement (ICMPv6 type 134)
    (radvd daemon could pick up on the kernel setting and use it)

Interface drivers may examine the Traffic Class value and translate
the DiffServ Code Point into a link-layer appropriate traffic
prioritization scheme.  An example of mapping IETF DSCP values to
IEEE 802.11 User Priority values can be found here:

    https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11

The expected primary use case is to properly prioritize ND over wifi.

Testing:
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  0
  jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  -bash: echo: write error: Invalid argument
  jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  -bash: echo: write error: Invalid argument
  jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  255
  jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  34

  jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1
  tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
  IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24)
  jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement,
  length 24, tgt is jzem22.pgc, Flags [solicited]

(based on original change written by Erik Kline, with minor changes)

v2: fix 'suspicious rcu_dereference_check() usage'
    by explicitly grabbing the rcu_read_lock.

Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11 15:13:02 +09:00
Tom Herbert 7afc19bc21 ila: Add ila.txt
Add documenation for kernel ILA. This describes ILA, features,
configuration gives some examples.

Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 11:21:16 +09:00
Priyaranjan Jha 1f2556916d tcp: higher throughput under reordering with adaptive RACK reordering wnd
Currently TCP RACK loss detection does not work well if packets are
being reordered beyond its static reordering window (min_rtt/4).Under
such reordering it may falsely trigger loss recoveries and reduce TCP
throughput significantly.

This patch improves that by increasing and reducing the reordering
window based on DSACK, which is now supported in major TCP implementations.
It makes RACK's reo_wnd adaptive based on DSACK and no. of recoveries.

- If DSACK is received, increment reo_wnd by min_rtt/4 (upper bounded
  by srtt), since there is possibility that spurious retransmission was
  due to reordering delay longer than reo_wnd.

- Persist the current reo_wnd value for TCP_RACK_RECOVERY_THRESH (16)
  no. of successful recoveries (accounts for full DSACK-based loss
  recovery undo). After that, reset it to default (min_rtt/4).

- At max, reo_wnd is incremented only once per rtt. So that the new
  DSACK on which we are reacting, is due to the spurious retx (approx)
  after the reo_wnd has been updated last time.

- reo_wnd is tracked in terms of steps (of min_rtt/4), rather than
  absolute value to account for change in rtt.

In our internal testing, we observed significant increase in throughput,
in scenarios where reordering exceeds min_rtt/4 (previous static value).

Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05 23:15:42 +09:00
Tom Herbert 47d3d7ac65 ipv6: Implement limits on Hop-by-Hop and Destination options
RFC 8200 (IPv6) defines Hop-by-Hop options and Destination options
extension headers. Both of these carry a list of TLVs which is
only limited by the maximum length of the extension header (2048
bytes). By the spec a host must process all the TLVs in these
options, however these could be used as a fairly obvious
denial of service attack. I think this could in fact be
a significant DOS vector on the Internet, one mitigating
factor might be that many FWs drop all packets with EH (and
obviously this is only IPv6) so an Internet wide attack might not
be so effective (yet!).

By my calculation, the worse case packet with TLVs in a standard
1500 byte MTU packet that would be processed by the stack contains
1282 invidual TLVs (including pad TLVS) or 724 two byte TLVs. I
wrote a quick test program that floods a whole bunch of these
packets to a host and sure enough there is substantial time spent
in ip6_parse_tlv. These packets contain nothing but unknown TLVS
(that are ignored), TLV padding, and bogus UDP header with zero
payload length.

  25.38%  [kernel]                    [k] __fib6_clean_all
  21.63%  [kernel]                    [k] ip6_parse_tlv
   4.21%  [kernel]                    [k] __local_bh_enable_ip
   2.18%  [kernel]                    [k] ip6_pol_route.isra.39
   1.98%  [kernel]                    [k] fib6_walk_continue
   1.88%  [kernel]                    [k] _raw_write_lock_bh
   1.65%  [kernel]                    [k] dst_release

This patch adds configurable limits to Destination and Hop-by-Hop
options. There are three limits that may be set:
  - Limit the number of options in a Hop-by-Hop or Destination options
    extension header.
  - Limit the byte length of a Hop-by-Hop or Destination options
    extension header.
  - Disallow unrecognized options in a Hop-by-Hop or Destination
    options extension header.

The limits are set in corresponding sysctls:

  ipv6.sysctl.max_dst_opts_cnt
  ipv6.sysctl.max_hbh_opts_cnt
  ipv6.sysctl.max_dst_opts_len
  ipv6.sysctl.max_hbh_opts_len

If a max_*_opts_cnt is less than zero then unknown TLVs are disallowed.
The number of known TLVs that are allowed is the absolute value of
this number.

If a limit is exceeded when processing an extension header the packet is
dropped.

Default values are set to 8 for options counts, and set to INT_MAX
for maximum length. Note the choice to limit options to 8 is an
arbitrary guess (roughly based on the fact that the stack supports
three HBH options and just one destination option).

These limits have being proposed in draft-ietf-6man-rfc6434-bis.

Tested (by Martin Lau)

I tested out 1 thread (i.e. one raw_udp process).

I changed the net.ipv6.max_dst_(opts|hbh)_number between 8 to 2048.
With sysctls setting to 2048, the softirq% is packed to 100%.
With 8, the softirq% is almost unnoticable from mpstat.

v2;
  - Code and documention cleanup.
  - Change references of RFC2460 to be RFC8200.
  - Add reference to RFC6434-bis where the limits will be in standard.

Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03 09:50:22 +09:00
Egil Hjelmeland b35be41549 net: dsa: lan9303: Added Documentation/networking/dsa/lan9303.txt
Provide a rough overview of the state of the driver. And explain that the
driver operates in two modes: bridged and port-separated.

Signed-off-by: Egil Hjelmeland <egil.hjelmeland@zenitel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 20:31:23 +09:00
Mahesh Bandewar fe89aa6b25 ipvlan: implement VEPA mode
This is very similar to the Macvlan VEPA mode, however, there is some
difference. IPvlan uses the mac-address of the lower device, so the VEPA
mode has implications of ICMP-redirects for packets destined for its
immediate neighbors sharing same master since the packets will have same
source and dest mac. The external switch/router will send redirect msg.

Having said that, this will be useful tool in terms of debugging
since IPvlan will not switch packets within its slaves and rely completely
on the external entity as intended in 802.1Qbg.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:39:57 +09:00
Mahesh Bandewar a190d04db9 ipvlan: introduce 'private' attribute for all existing modes.
IPvlan has always operated in bridge mode. However there are scenarios
where each slave should be able to talk through the master device but
not necessarily across each other. Think of an environment where each
of a namespace is a private and independant customer. In this scenario
the machine which is hosting these namespaces neither want to tell who
their neighbor is nor the individual namespaces care to talk to neighbor
on short-circuited network path.

This patch implements the mode that is very similar to the 'private' mode
in macvlan where individual slaves can send and receive traffic through
the master device, just that they can not talk among slave devices.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:39:57 +09:00
Donald Sharp 17c918840f doc: Update VRF documentation metric
Two things:

1) Update examples to show usage of metric
2) Discuss reasoning for using such a high metric.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:03:03 +01:00
David Howells bc5e3a546d rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals
Make AF_RXRPC accept MSG_WAITALL as a flag to sendmsg() to tell it to
ignore signals whilst loading up the message queue, provided progress is
being made in emptying the queue at the other side.

Progress is defined as the base of the transmit window having being
advanced within 2 RTT periods.  If the period is exceeded with no progress,
sendmsg() will return anyway, indicating how much data has been copied, if
any.

Once the supplied buffer is entirely decanted, the sendmsg() will return.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18 11:43:07 +01:00
David Howells f4d15fb6f9 rxrpc: Provide functions for allowing cleaner handling of signals
Provide a couple of functions to allow cleaner handling of signals in a
kernel service.  They are:

 (1) rxrpc_kernel_get_rtt()

     This allows the kernel service to find out the RTT time for a call, so
     as to better judge how large a timeout to employ.

     Note, though, that whilst this returns a value in nanoseconds, the
     timeouts can only actually be in jiffies.

 (2) rxrpc_kernel_check_life()

     This returns a number that is updated when ACKs are received from the
     peer (notably including PING RESPONSE ACKs which we can elicit by
     sending PING ACKs to see if the call still exists on the server).

     The caller should compare the numbers of two calls to see if the call
     is still alive.

These can be used to provide an extending timeout rather than returning
immediately in the case that a signal occurs that would otherwise abort an
RPC operation.  The timeout would be extended if the server is still
responsive and the call is still apparently alive on the server.

For most operations this isn't that necessary - but for FS.StoreData it is:
OpenAFS writes the data to storage as it comes in without making a backup,
so if we immediately abort it when partially complete on a CTRL+C, say, we
have no idea of the state of the file after the abort.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18 11:42:48 +01:00
David Howells a68f4a27f5 rxrpc: Support service upgrade from a kernel service
Provide support for a kernel service to make use of the service upgrade
facility.  This involves:

 (1) Pass an upgrade request flag to rxrpc_kernel_begin_call().

 (2) Make rxrpc_kernel_recv_data() return the call's current service ID so
     that the caller can detect service upgrade and see what the service
     was upgraded to.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18 11:37:20 +01:00
Tom Saeger f2b4187424 Documentation: fix networking related doc refs.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:21:05 -06:00
Tom Saeger 4269a69110 Documentation: fix usb related doc refs
Update ref to usb proc_usb_info.txt.

Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:15:48 -06:00
David S. Miller df2fd38a08 Work continues in various areas:
* port authorized event for 4-way-HS offload (Avi)
  * enable MFP optional for such devices (Emmanuel)
  * Kees's timer setup patch for mac80211 mesh
    (the part that isn't trivially scripted)
  * improve VLAN vs. TXQ handling (myself)
  * load regulatory database as firmware file (myself)
  * with various other small improvements and cleanups
 
 I merged net-next once in the meantime to allow Kees's
 timer setup patch to go in.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEExu3sM/nZ1eRSfR9Ha3t4Rpy0AB0FAlneDzEACgkQa3t4Rpy0
 AB3EHBAAhQana6YiMx0Ag4ANGlll3xnxFCZlkmlBoJ/EwKgQhPonylHntuvtkXf6
 kZRsOr4uA+wpN/opHLGfMJzat9uxztHVo2sT4rxVnvZq4DYcB/JdlhTMLZDsdDgm
 kHRpUEKh/+2FAgq2A4VEUpVb+Mtg0dq8iJJXFw89xb3Sw5UhNA6ljWQZ4zpXuI0P
 xOB8Z52LqAcMNnspP+L2TRpanu2ETLcl4Laj+cMl1Yiut2GHkclXUoGvbZ1al5SO
 CYqpjVKk67ENLJMrmhQ7DVzj0rpwlV+Eh756RU9DhamPAWbxqWLWJgfuGBskRXnI
 GneCUQkLZ5j1kUJjvQdXBv1UmpkCG4/3yITZX8kL3UR+AbhSCqzVQDo7it5hsWEf
 XTNAlhdTDhSn7OQQ6XOxvWeydAiaaz671bhPuIvKEo9D/+7Uv0PxHmvu8QqUm0xH
 Wvyh0LYRrblDz7fgEkaFctjJKYKnwviQ9O2LGx98C8NVam+Qyti2MlLA4AO5E+it
 ky97W3Dh5ftjQhFD0Ip9P4+BO/9hvNELlCRWUXI197n6B0/KH7FWX1eqw/vpnKc4
 w7VB/V59mB8zMmZ1QUdwT1/Ru+MD++6ds93STttZvH/0P3H0dDRGuxUK4m32YHiX
 s97uSBAbBMy2UH6b8HyxjVMGWvmW3KRakBID1zv2NRSIXtyfWj4=
 =gW8q
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2017-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Work continues in various areas:
 * port authorized event for 4-way-HS offload (Avi)
 * enable MFP optional for such devices (Emmanuel)
 * Kees's timer setup patch for mac80211 mesh
   (the part that isn't trivially scripted)
 * improve VLAN vs. TXQ handling (myself)
 * load regulatory database as firmware file (myself)
 * with various other small improvements and cleanups

I merged net-next once in the meantime to allow Kees's
timer setup patch to go in.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11 10:15:01 -07:00
Johannes Berg c8c240e284 cfg80211: reg: remove support for built-in regdb
Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 13:18:51 +02:00
Johannes Berg 007f6c5e6e cfg80211: support loading regulatory database as firmware file
As the current regulatory database is only about 4k big, and already
difficult to extend, we decided that overall it would be better to
get rid of the complications with CRDA and load the database into the
kernel directly, but in a new format that is extensible.

The new file format can be extended since it carries a length field
on all the structs that need to be extensible.

In order to be able to request firmware when the module initializes,
move cfg80211 from subsys_initcall() to the later fs_initcall(); the
firmware loader is at the same level but linked earlier, so it can
be called from there. Otherwise, when both the firmware loader and
cfg80211 are built-in, the request will crash the kernel. We also
need to be before device_initcall() so that cfg80211 is available
for devices when they initialize.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11 13:04:15 +02:00
David S. Miller d93fa2ba64 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-10-09 20:11:09 -07:00
Haiyang Zhang 78005d91c1 hv_netvsc: Update netvsc Document for TCP hash level setting
Update Documentation/networking/netvsc.txt for TCP hash level setting
and related info.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 10:11:01 -07:00
Axel Beckert 00a534e5ea doc: Fix typo "8023.ad" in bonding documentation
Should be "802.3ad" like everywhere else in the document.

Signed-off-by: Axel Beckert <abe@deuxchevaux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-07 23:19:13 +01:00
Linus Torvalds 71aa60f67f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix NAPI poll list corruption in enic driver, from Christian
    Lamparter.

 2) Fix route use after free, from Eric Dumazet.

 3) Fix regression in reuseaddr handling, from Josef Bacik.

 4) Assert the size of control messages in compat handling since we copy
    it in from userspace twice. From Meng Xu.

 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
    from Ursula Braun.

 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.

 7) Don't use ARRAY_SIZE on spinlock array which might have zero
    entries, from Geert Uytterhoeven.

 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
    Kasiviswanathan.

 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
    Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  inet: fix improper empty comparison
  net: use inet6_rcv_saddr to compare sockets
  net: set tb->fast_sk_family
  net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
  MAINTAINERS: update git tree locations for ieee802154 subsystem
  net: prevent dst uses after free
  net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
  net/smc: no close wait in case of process shut down
  net/smc: introduce a delay
  net/smc: terminate link group if out-of-sync is received
  net/smc: longer delay for client link group removal
  net/smc: adapt send request completion notification
  net/smc: adjust net_device refcount
  net/smc: take RCU read lock for routing cache lookup
  net/smc: add receive timeout check
  net/smc: add missing dev_put
  net: stmmac: Cocci spatch "of_table"
  lan78xx: Use default values loaded from EEPROM/OTP after reset
  lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
  lan78xx: Fix for eeprom read/write when device auto suspend
  ...
2017-09-23 05:41:27 -10:00
Linus Torvalds c0a3a64e72 Major additions:
- sysctl and seccomp operation to discover available actions. (tyhicks)
 - new per-filter configurable logging infrastructure and sysctl. (tyhicks)
 - SECCOMP_RET_LOG to log allowed syscalls. (tyhicks)
 - SECCOMP_RET_KILL_PROCESS as the new strictest possible action.
 - self-tests for new behaviors.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJZxVbTAAoJEIly9N/cbcAmvIAQALR9aVQQXjma4lLhZxwTsLtG
 rJm8t/o4y/2aBV8vzpFbMPT5gfN/PAkHJpCoxVPssx0k4PH2M7HjpnR6E1OC+erg
 RNom3uNdNqZeFlDpdX1qriYiCTB9p6rHe0DPwgG9iGqgDxsJ+G3W+x1sMZ1C+A0M
 shxA3fwt+Qpivo8Zq44xjMFjK+Zeor9V3yPc51QoZktWHlM16ID3HvHVnUtzqAUb
 nTWF6ZlmZlJ/lp4Dq8/55lytVcXPo240G3H0Odai+SNFakK6p5UO//BRBV209bmb
 05jpAOH6uym1sxVz00TQXCtDqOEzs2mQgomtTSShHg8SrLFX7nFkEFtAVA6tEri2
 FqDYce9KX7ZtOYiq83C7pnpAFCouc0z31dQl9USHiAiexXklwBIX+OsVv98omWGi
 pW43uLE2ovY0cpOsN50xI4mnxiGh6MhFcdbor2VLRJwLIFSw3XjjgNCCLyK4AJxs
 N514252qi70c9cWyAHYDLy077yTVxu3JUlsVQKtRTMfoFUq6bX1jPXVXE8qkVrui
 bc/Ay54pPrUwM854IpQ9ZBOuMfs6I5opocGIsBvMaND45U4o2B0ANCsxhuZ0zEtM
 E55DhK5OgjukNemQmlWK2foDckYdtkJXCj2yMBNQady0Uynr2BWZ6VDBP7vFcnRB
 UihRlFZRZleu8383uHsc
 =sKeC
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp updates from Kees Cook:
 "Major additions:

   - sysctl and seccomp operation to discover available actions
     (tyhicks)

   - new per-filter configurable logging infrastructure and sysctl
     (tyhicks)

   - SECCOMP_RET_LOG to log allowed syscalls (tyhicks)

   - SECCOMP_RET_KILL_PROCESS as the new strictest possible action

   - self-tests for new behaviors"

[ This is the seccomp part of the security pull request during the merge
  window that was nixed due to unrelated problems   - Linus ]

* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples: Unrename SECCOMP_RET_KILL
  selftests/seccomp: Test thread vs process killing
  seccomp: Implement SECCOMP_RET_KILL_PROCESS action
  seccomp: Introduce SECCOMP_RET_KILL_PROCESS
  seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
  seccomp: Action to log before allowing
  seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
  seccomp: Selftest for detection of filter flag support
  seccomp: Sysctl to configure actions that are allowed to be logged
  seccomp: Operation for checking if an action is available
  seccomp: Sysctl to display available actions
  seccomp: Provide matching filter for introspection
  selftests/seccomp: Refactor RET_ERRNO tests
  selftests/seccomp: Add simple seccomp overhead benchmark
  selftests/seccomp: Add tests for basic ptrace actions
2017-09-22 16:16:41 -10:00
Matteo Croce 35e015e1f5 ipv6: fix net.ipv6.conf.all interface DAD handlers
Currently, writing into
net.ipv6.conf.all.{accept_dad,use_optimistic,optimistic_dad} has no effect.
Fix handling of these flags by:

- using the maximum of global and per-interface values for the
  accept_dad flag. That is, if at least one of the two values is
  non-zero, enable DAD on the interface. If at least one value is
  set to 2, enable DAD and disable IPv6 operation on the interface if
  MAC-based link-local address was found

- using the logical OR of global and per-interface values for the
  optimistic_dad flag. If at least one of them is set to one, optimistic
  duplicate address detection (RFC 4429) is enabled on the interface

- using the logical OR of global and per-interface values for the
  use_optimistic flag. If at least one of them is set to one,
  optimistic addresses won't be marked as deprecated during source address
  selection on the interface.

While at it, as we're modifying the prototype for ipv6_use_optimistic_addr(),
drop inline, and let the compiler decide.

Fixes: 7fd2561e4e ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19 16:44:02 -07:00
Randy Dunlap 51513748dd Documentation: networking: fix ASCII art in switchdev.txt
Fix ASCII art in Documentation/networking/switchdev.txt:

Change non-ASCII "spaces" to ASCII spaces.

Change 2 erroneous '+' characters in ASCII art to '-' (at the '*'
characters below):

line 32:
                     +--+----+----+----+-*--+----+---+  +-----+-----+
line 41:
                     +--------------+---*------------+

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 16:38:46 -07:00
Pavel Machek 2130c02816 Documentation: link in networking docs
Fix link in filter.txt.

Acked-by: Pavel Machek <pavel@ucw.cz>

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16 09:12:48 -07:00
Linus Torvalds aae3dbb477 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
2017-09-06 14:45:08 -07:00
Linus Torvalds 81a84ad3cb Merge branch 'docs-next' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
 "After a fair amount of churn in the last couple of cycles, docs are
  taking it easier this time around. Lots of fixes and some new
  documentation, but nothing all that radical. Perhaps the most
  interesting change for many is the scripts/sphinx-pre-install tool
  from Mauro; it will tell you exactly which packages you need to
  install to get a working docs toolchain on your system.

  There are two little patches reaching outside of Documentation/; both
  just tweak kerneldoc comments to eliminate warnings and fix some
  dangling doc pointers"

* 'docs-next' of git://git.lwn.net/linux: (52 commits)
  Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
  genalloc: Fix an incorrect kerneldoc comment
  doc: Add documentation for the genalloc subsystem
  assoc_array: fix path to assoc_array documentation
  kernel-doc parser mishandles declarations split into lines
  docs: ReSTify table of contents in core.rst
  docs: process: drop git snapshots from applying-patches.rst
  Documentation:input: fix typo
  swap: Remove obsolete sentence
  sphinx.rst: Allow Sphinx version 1.6 at the docs
  docs-rst: fix verbatim font size on tables
  Documentation: stable-kernel-rules: fix broken git urls
  rtmutex: update rt-mutex
  rtmutex: update rt-mutex-design
  docs: fix minimal sphinx version in conf.py
  docs: fix nested numbering in the TOC
  NVMEM documentation fix: A minor typo
  docs-rst: pdf: use same vertical margin on all Sphinx versions
  doc: Makefile: if sphinx is not found, run a check script
  docs: Fix paths in security/keys
  ...
2017-09-03 21:07:29 -07:00
David S. Miller b63f6044d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. Basically, updates to the conntrack core, enhancements for
nf_tables, conversion of netfilter hooks from linked list to array to
improve memory locality and asorted improvements for the Netfilter
codebase. More specifically, they are:

1) Add expection to hashes after timer initialization to prevent
   access from another CPU that walks on the hashes and calls
   del_timer(), from Florian Westphal.

2) Don't update nf_tables chain counters from hot path, this is only
   used by the x_tables compatibility layer.

3) Get rid of nested rcu_read_lock() calls from netfilter hook path.
   Hooks are always guaranteed to run from rcu read side, so remove
   nested rcu_read_lock() where possible. Patch from Taehee Yoo.

4) nf_tables new ruleset generation notifications include PID and name
   of the process that has updated the ruleset, from Phil Sutter.

5) Use skb_header_pointer() from nft_fib, so we can reuse this code from
   the nf_family netdev family. Patch from Pablo M. Bermudo.

6) Add support for nft_fib in nf_tables netdev family, also from Pablo.

7) Use deferrable workqueue for conntrack garbage collection, to reduce
   power consumption, from Patch from Subash Abhinov Kasiviswanathan.

8) Add nf_ct_expect_iterate_net() helper and use it. From Florian
   Westphal.

9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian.

10) Drop references on conntrack removal path when skbuffs has escaped via
    nfqueue, from Florian.

11) Don't queue packets to nfqueue with dying conntrack, from Florian.

12) Constify nf_hook_ops structure, from Florian.

13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter.

14) Add nla_strdup(), from Phil Sutter.

15) Rise nf_tables objects name size up to 255 chars, people want to use
    DNS names, so increase this according to what RFC 1035 specifies.
    Patch series from Phil Sutter.

16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook
    registration on demand, suggested by Eric Dumazet, patch from Florian.

17) Remove unused variables in compat_copy_entry_from_user both in
    ip_tables and arp_tables code. Patch from Taehee Yoo.

18) Constify struct nf_conntrack_l4proto, from Julia Lawall.

19) Constify nf_loginfo structure, also from Julia.

20) Use a single rb root in connlimit, from Taehee Yoo.

21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo.

22) Use audit_log() instead of open-coding it, from Geliang Tang.

23) Allow to mangle tcp options via nft_exthdr, from Florian.

24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes
    a fix for a miscalculation of the minimal length.

25) Simplify branch logic in h323 helper, from Nick Desaulniers.

26) Calculate netlink attribute size for conntrack tuple at compile
    time, from Florian.

27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure.
    From Florian.

28) Remove holes in nf_conntrack_l4proto structure, so it becomes
    smaller. From Florian.

29) Get rid of print_tuple() indirection for /proc conntrack listing.
    Place all the code in net/netfilter/nf_conntrack_standalone.c.
    Patch from Florian.

30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is
    off. From Florian.

31) Constify most nf_conntrack_{l3,l4}proto helper functions, from
    Florian.

32) Fix broken indentation in ebtables extensions, from Colin Ian King.

33) Fix several harmless sparse warning, from Florian.

34) Convert netfilter hook infrastructure to use array for better memory
    locality, joint work done by Florian and Aaron Conole. Moreover, add
    some instrumentation to debug this.

35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once
    per batch, from Florian.

36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian.

37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao.

38) Remove unused code in the generic protocol tracker, from Davide
    Caratti.

I think I will have material for a second Netfilter batch in my queue if
time allow to make it fit in this merge window.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03 17:08:42 -07:00
Willem de Bruijn cc8889ae82 doc: document MSG_ZEROCOPY
Documentation for this feature was missing from the patchset.
Copied a lot from the netdev 2.1 paper, addressing some small
interface changes since then.

Changes
  v1 -> v2
    - change email discussion URL format
    - clarify that u32 counter is per-syscall, unsigned and
      wraps after UINT_MAX calls
    - describe errno on send failure specific to MSG_ZEROCOPY
    - a few very minor rewordings

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 10:39:35 -07:00
Haiyang Zhang d35d6e92ca hv_netvsc: Fix typos in the document of UDP hashing
There are two typos in the document, netvsc.txt,
regarding UDP hashing level. This patch fixes them.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 16:04:44 -07:00
Subash Abhinov Kasiviswanathan ceed73a2cf drivers: net: ethernet: qualcomm: rmnet: Initial implementation
RmNet driver provides a transport agnostic MAP (multiplexing and
aggregation protocol) support in embedded module. Module provides
virtual network devices which can be attached to any IP-mode
physical device. This will be used to provide all MAP functionality
on future hardware in a single consistent location.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 11:41:13 -07:00
Eric Dumazet eaa72dc474 neigh: increase queue_len_bytes to match wmem_default
Florian reported UDP xmit drops that could be root caused to the
too small neigh limit.

Current limit is 64 KB, meaning that even a single UDP socket would hit
it, since its default sk_sndbuf comes from net.core.wmem_default
(~212992 bytes on 64bit arches).

Once ARP/ND resolution is in progress, we should allow a little more
packets to be queued, at least for one producer.

Once neigh arp_queue is filled, a rogue socket should hit its sk_sndbuf
limit and either block in sendmsg() or return -EAGAIN.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29 16:10:50 -07:00
Florian Fainelli c965584039 Documentation: networking: Add blurb about patches in patchwork
Explain that the patch queue in patchwork should not be touched by patch
submitters.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29 15:12:34 -07:00
David Howells c038a58ccf rxrpc: Allow failed client calls to be retried
Allow a client call that failed on network error to be retried, provided
that the Tx queue still holds DATA packet 1.  This allows an operation to
be submitted to another server or another address for the same server
without having to repackage and re-encrypt the data so far processed.

Two new functions are provided:

 (1) rxrpc_kernel_check_call() - This is used to find out the completion
     state of a call to guess whether it can be retried and whether it
     should be retried.

 (2) rxrpc_kernel_retry_call() - Disconnect the call from its current
     connection, reset the state and submit it as a new client call to a
     new address.  The new address need not match the previous address.

A call may be retried even if all the data hasn't been loaded into it yet;
a partially constructed will be retained at the same point it was at when
an error condition was detected.  msg_data_left() can be used to find out
how much data was packaged before the error occurred.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29 10:55:20 +01:00
David Howells e833251ad8 rxrpc: Add notification of end-of-Tx phase
Add a callback to rxrpc_kernel_send_data() so that a kernel service can get
a notification that the AF_RXRPC call has transitioned out the Tx phase and
is now waiting for a reply or a final ACK.

This is called from AF_RXRPC with the call state lock held so the
notification is guaranteed to come before any reply is passed back.

Further, modify the AFS filesystem to make use of this so that we don't have
to change the afs_call state before sending the last bit of data.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29 10:55:20 +01:00
Madalin Bucur 0659191630 Documentation: networking: add RSS information
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:41:01 -07:00
Eric Biggers 3fd8712707 strparser: initialize all callbacks
commit bbb03029a8 ("strparser: Generalize strparser") added more
function pointers to 'struct strp_callbacks'; however, kcm_attach() was
not updated to initialize them.  This could cause the ->lock() and/or
->unlock() function pointers to be set to garbage values, causing a
crash in strp_work().

Fix the bug by moving the callback structs into static memory, so
unspecified members are zeroed.  Also constify them while we're at it.

This bug was found by syzkaller, which encountered the following splat:

    IP: 0x55
    PGD 3b1ca067
    P4D 3b1ca067
    PUD 3b12f067
    PMD 0

    Oops: 0010 [#1] SMP KASAN
    Dumping ftrace buffer:
       (ftrace buffer empty)
    Modules linked in:
    CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: kstrp strp_work
    task: ffff88006bb0e480 task.stack: ffff88006bb10000
    RIP: 0010:0x55
    RSP: 0018:ffff88006bb17540 EFLAGS: 00010246
    RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000
    RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48
    RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000
    R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48
    R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000
    FS:  0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098
     worker_thread+0x223/0x1860 kernel/workqueue.c:2233
     kthread+0x35e/0x430 kernel/kthread.c:231
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
    Code:  Bad RIP value.
    RIP: 0x55 RSP: ffff88006bb17540
    CR2: 0000000000000055
    ---[ end trace f0e4920047069cee ]---

Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and
CONFIG_AF_KCM=y):

    #include <linux/bpf.h>
    #include <linux/kcm.h>
    #include <linux/types.h>
    #include <stdint.h>
    #include <sys/ioctl.h>
    #include <sys/socket.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    static const struct bpf_insn bpf_insns[3] = {
        { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */
        { .code = 0x95 }, /* BPF_EXIT_INSN() */
    };

    static const union bpf_attr bpf_attr = {
        .prog_type = 1,
        .insn_cnt = 2,
        .insns = (uintptr_t)&bpf_insns,
        .license = (uintptr_t)"",
    };

    int main(void)
    {
        int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD,
                             &bpf_attr, sizeof(bpf_attr));
        int inet_fd = socket(AF_INET, SOCK_STREAM, 0);
        int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0);

        ioctl(kcm_fd, SIOCKCMATTACH,
              &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd });
    }

Fixes: bbb03029a8 ("strparser: Generalize strparser")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24 21:57:50 -07:00
Jakub Sitnicki 22b6722bfa ipv6: Add sysctl for per namespace flow label reflection
Reflecting IPv6 Flow Label at server nodes is useful in environments
that employ multipath routing to load balance the requests. As "IPv6
Flow Label Reflection" standard draft [1] points out - ICMPv6 PTB error
messages generated in response to a downstream packets from the server
can be routed by a load balancer back to the original server without
looking at transport headers, if the server applies the flow label
reflection. This enables the Path MTU Discovery past the ECMP router in
load-balance or anycast environments where each server node is reachable
by only one path.

Introduce a sysctl to enable flow label reflection per net namespace for
all newly created sockets. Same could be earlier achieved only per
socket by setting the IPV6_FL_F_REFLECT flag for the IPV6_FLOWLABEL_MGR
socket option.

[1] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01

Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24 18:05:43 -07:00
Shubham Bansal d2aaa3dc41 bpf, doc: Add arm32 as arch supporting eBPF JIT
As eBPF JIT support for arm32 was added recently with
commit 39c13c204b, it seems appropriate to
add arm32 as arch with support for eBPF JIT in bpf and sysctl docs as well.

Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23 22:40:12 -07:00
Haiyang Zhang 3b0c34580b hv_netvsc: Update netvsc Document for UDP hash level setting
Update Documentation/networking/netvsc.txt for UDP hash level setting
and related info.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 14:08:12 -07:00
Aviad Krawczyk 51ba902a16 net-next/hinic: Initialize hw interface
Initialize hw interface as part of the nic initialization for accessing hw.

Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 10:48:52 -07:00
David S. Miller e2a7c34fb2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-08-21 17:06:42 -07:00
Chris Packham 5a78449810 switchdev: documentation: minor typo fixes
Two typos in switchdev.txt

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 19:49:10 -07:00