Commit Graph

14 Commits

Author SHA1 Message Date
San Mehat 0d9c51a6e1 block: partition: add partition specific uevent callbacks for partition info
This patch has been carried in the Android tree for quite some time and
is one of the few patches required to get a mainline kernel up and
running with an exsiting Android userspace.  So I wanted to submit it
for review and consideration if it should be merged.

For partitions, add new uevent parameters 'PARTN' which specifies the
partitions index in the table, and 'PARTNAME', which specifies PARTNAME
specifices the partition name of a partition device.

Android's userspace uses this for creating device node links from the
partition name and number, ie:

    /dev/block/platform/soc/by-name/system
or
    /dev/block/platform/soc/by-num/p1

One can see its usage here:
    https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355
and
    https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494

[john.stultz@linaro.org: dropped NPARTS and reworded commit message for context]
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <harald@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Dan Williams d1a5f2b4d8 block: use DAX for partition table reads
Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.

Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-30 13:35:32 -08:00
Eric Sandeen 77032ca66f Return EBUSY from BLKRRPART for mounted whole-dev fs
Today, blockdev --rereadpt /dev/sda will fail with EBUSY if any
partition of sda is mounted (and will fail with EINVAL if pointed
at a partition).  But it will pass if the entire block device is
formatted with a filesystem and mounted.  I don't think this makes
sense; partitioning should surely not ever change out from under
a mounted device.

So check for bdev->bd_super, and fail that with -EBUSY as well.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25 20:49:24 -07:00
Martin K. Petersen 25520d55cd block: Inline blk_integrity in struct gendisk
Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:42 -06:00
Ming Lei 6c71013ecb block: partition: convert percpu ref
Percpu refcount is the perfect match for partition's case,
and the conversion is quite straight.

With the convertion, one pair of atomic inc/dec can be saved
for accounting block I/O, which is run in hot path of block I/O.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Ming Lei b54e5ed8f2 block: partition: introduce hd_free_part()
So the helper can be used in both generic partition
case and part0 case.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Keith Busch 2da78092dd block: Fix dev_t minor allocation lifetime
Releases the dev_t minor when all references are closed to prevent
another device from acquiring the same major/minor.

Since the partition's release may be invoked from call_rcu's soft-irq
context, the ext_dev_idr's mutex had to be replaced with a spinlock so
as not so sleep.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-03 15:01:02 -06:00
Jens Axboe c2fccc1c9f Revert "loop: cleanup partitions when detaching loop device"
This reverts commit 8761a3dc1f.

There are situations where the destruction path is called
with the bdev->bd_mutex already held, which then deadlocks in
loop_clr_fd(). The normal partition cleanup does a trylock()
on the mutex, but it'd be nice to have a more bullet proof
method in loop. So punt this more involved fix to the next
merge window, and just back out this buggy fix for now.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-04-08 10:12:11 +02:00
Phillip Susi 8761a3dc1f loop: cleanup partitions when detaching loop device
Any partitions added by user space to the loop device were being
left in place after detaching the loop device.  This was because
the detach path issued a BLKRRPART to clean up partitions if
LO_FLAGS_PARTSCAN was set, meaning that the partitions were auto
scanned on attach.  Replace this BLKRRPART with code that
unconditionally cleans up partitions on detach instead.

Signed-off-by: Phillip Susi <psusi@ubuntu.com>

Modified by Jens to export delete_partition().

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-22 12:21:53 -06:00
Ming Lei ac2e5327a5 block/partitions: optimize memory allocation in check_partition()
Currently, sizeof(struct parsed_partitions) may be 64KB in 32bit arch, so
it is easy to trigger page allocation failure by check_partition,
especially in hotplug block device situation(such as, USB mass storage,
MMC card, ...), and Felipe Balbi has observed the failure.

This patch does below optimizations on the allocation of struct
parsed_partitions to try to address the issue:

- make parsed_partitions.parts as pointer so that the pointed memory can
  fit in 32KB buffer, then approximate 32KB memory can be saved

- vmalloc the buffer pointed by parsed_partitions.parts because 32KB is
  still a bit big for kmalloc

- given that many devices have the partition count limit, so only
  allocate disk_max_parts() partitions instead of 256 partitions always

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reported-by: Felipe Balbi <balbi@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:21 -08:00
Tomas Henzl 7b74e91278 block: fix ext_devt_idr handling
While adding and removing a lot of disks disks and partitions this
sometimes shows up:

  WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
  Hardware name:
  sysfs: cannot create duplicate filename '/dev/block/259:751'
  Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan]
  Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1
  Call Trace:
    warn_slowpath_common+0x87/0xc0
    warn_slowpath_fmt+0x46/0x50
    sysfs_add_one+0xc9/0x130
    sysfs_do_create_link+0x12b/0x170
    sysfs_create_link+0x13/0x20
    device_add+0x317/0x650
    idr_get_new+0x13/0x50
    add_partition+0x21c/0x390
    rescan_partitions+0x32b/0x470
    sd_open+0x81/0x1f0 [sd_mod]
    __blkdev_get+0x1b6/0x3c0
    blkdev_get+0x10/0x20
    register_disk+0x155/0x170
    add_disk+0xa6/0x160
    sd_probe_async+0x13b/0x210 [sd_mod]
    add_wait_queue+0x46/0x60
    async_thread+0x102/0x250
    default_wake_function+0x0/0x20
    async_thread+0x0/0x250
    kthread+0x96/0xa0
    child_rip+0xa/0x20
    kthread+0x0/0xa0
    child_rip+0x0/0x20

This most likely happens because dev_t is freed while the number is
still used and idr_get_new() is not protected on every use.  The fix
adds a mutex where it wasn't before and moves the dev_t free function so
it is called after device del.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:12 -08:00
Vivek Goyal c83f6bf98d block: add partition resize function to blkpg ioctl
Add a new operation code (BLKPG_RESIZE_PARTITION) to the BLKPG ioctl that
allows altering the size of an existing partition, even if it is currently
in use.

This patch converts hd_struct->nr_sects into sequence counter because
One might extend a partition while IO is happening to it and update of
nr_sects can be non-atomic on 32bit machines with 64bit sector_t. This
can lead to issues like reading inconsistent size of a partition. Sequence
counter have been used so that readers don't have to take bdev mutex lock
as we call sector_in_part() very frequently.

Now all the access to hd_struct->nr_sects should happen using sequence
counter read/update helper functions part_nr_sects_read/part_nr_sects_write.
There is one exception though, set_capacity()/get_capacity(). I think
theoritically race should exist there too but this patch does not
modify set_capacity()/get_capacity() due to sheer number of call sites
and I am afraid that change might break something. I have left that as a
TODO item. We can handle it later if need be. This patch does not introduce
any new races as such w.r.t set_capacity()/get_capacity().

v2: Add CONFIG_LBDAF test to UP preempt case as suggested by Phillip.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-01 12:24:18 +02:00
Jun'ichi Nomura fe316bf2d5 block: Fix NULL pointer dereference in sd_revalidate_disk
Since 2.6.39 (1196f8b), when a driver returns -ENOMEDIUM for open(),
__blkdev_get() calls rescan_partitions() to remove
in-kernel partition structures and raise KOBJ_CHANGE uevent.

However it ends up calling driver's revalidate_disk without open
and could cause oops.

In the case of SCSI:

  process A                  process B
  ----------------------------------------------
  sys_open
    __blkdev_get
      sd_open
        returns -ENOMEDIUM
                             scsi_remove_device
                               <scsi_device torn down>
      rescan_partitions
        sd_revalidate_disk
          <oops>
Oopses are reported here:
http://marc.info/?l=linux-scsi&m=132388619710052

This patch separates the partition invalidation from rescan_partitions()
and use it for -ENOMEDIUM case.

Reported-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:38:33 +01:00
Al Viro 94ea4158f1 separate partition format handling from generic code
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:06 -05:00