Commit Graph

33932 Commits

Author SHA1 Message Date
Michal Kazior 47e4df94d1 mac80211: fix channel switch for chanctx-based drivers
The new_ctx pointer is set only for non-chanctx drivers.  This yielded a
crash for chanctx-based drivers during channel switch finalization:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211]

Use an adequate chanctx pointer to fix this.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-22 14:45:49 -07:00
Daniel Borkmann aa4a83ee8b net: sctp: fix suboptimal edge-case on non-active active/retrans path selection
In SCTP, selection of active (T.ACT) and retransmission (T.RET)
transports is being done whenever transport control operations
(UP, DOWN, PF, ...) are engaged through sctp_assoc_control_transport().

Commits 4c47af4d5e ("net: sctp: rework multihoming retransmission
path selection to rfc4960") and a7288c4dd5 ("net: sctp: improve
sctp_select_active_and_retran_path selection") have both improved
it towards a more fine-grained and optimal path selection.

Currently, the selection algorithm for T.ACT and T.RET is as follows:

1) Elect the two most recently used ACTIVE transports T1, T2 for
   T.ACT, T.RET, where T.ACT<-T1 and T1 is most recently used
2) In case primary path T.PRI not in {T1, T2} but ACTIVE, set
   T.ACT<-T.PRI and T.RET<-T1
3) If only T1 is ACTIVE from the set, set T.ACT<-T1 and T.RET<-T1
4) If none is ACTIVE, set T.ACT<-best(T.PRI, T.RET, T3) where
   T3 is the most recently used (if avail) in PF, set T.RET<-T.PRI

Prior to above commits, 4) was simply a camp on T.ACT<-T.PRI and
T.RET<-T.PRI, ignoring possible paths in PF. Camping on T.PRI is
still slightly suboptimal as it can lead to the following scenario:

Setup:
        <A>                                <B>
    T1: p1p1 (10.0.10.10) <==>  .'`)  <==> p1p1 (10.0.10.12)  <= T.PRI
    T2: p1p2 (10.0.10.20) <==> (_ . ) <==> p1p2 (10.0.10.22)

    net.sctp.rto_min = 1000
    net.sctp.path_max_retrans = 2
    net.sctp.pf_retrans = 0
    net.sctp.hb_interval = 1000

T.PRI is permanently down, T2 is put briefly into PF state (e.g. due to
link flapping). Here, the first time transmission is sent over PF path
T2 as it's the only non-INACTIVE path, but the retransmitted data-chunks
are sent over the INACTIVE path T1 (T.PRI), which is not good.

After the patch, it's choosing better transports in both cases by
modifying step 4):

4) If none is ACTIVE, set T.ACT_new<-best(T.ACT_old, T3) where T3 is
   the most recently used (if avail) in PF, set T.RET<-T.ACT_new

This will still select a best possible path in PF if available (which
can also include T.PRI/T.RET), and set both T.ACT/T.RET to it.

In case sctp_assoc_control_transport() *just* put T.ACT_old into INACTIVE
as it transitioned from ACTIVE->PF->INACTIVE and stays in INACTIVE just
for a very short while before going back ACTIVE, it will guarantee that
this path will be reselected for T.ACT/T.RET since T3 (PF) is not
available.

Previously, this was not possible, as we would only select between T.PRI
and T.RET, and a possible T3 would be NULL due to the fact that we have
just transitioned T3 in sctp_assoc_control_transport() from PF->INACTIVE
and would select a suboptimal path when T.PRI/T.RET have worse properties.

In the case that T.ACT_old permanently went to INACTIVE during this
transition and there's no PF path available, plus T.PRI and T.RET are
INACTIVE as well, we would now camp on T.ACT_old, but if everything is
being INACTIVE there's really not much we can do except hoping for a
successful HB to bring one of the transports back up again and, thus
cause a new selection through sctp_assoc_control_transport().

Now both tests work fine:

Case 1:

 1. T1 S(ACTIVE) T.ACT
    T2 S(ACTIVE) T.RET

 2. T1 S(ACTIVE) T.ACT, T.RET
    T2 S(PF)

 3. T1 S(ACTIVE) T.ACT, T.RET
    T2 S(INACTIVE)

 5. T1 S(PF) T.ACT, T.RET
    T2 S(INACTIVE)

[ 5.1 T1 S(INACTIVE) T.ACT, T.RET
      T2 S(INACTIVE) ]

 6. T1 S(ACTIVE) T.ACT, T.RET
    T2 S(INACTIVE)

 7. T1 S(ACTIVE) T.ACT
    T2 S(ACTIVE) T.RET

Case 2:

 1. T1 S(ACTIVE) T.ACT
    T2 S(ACTIVE) T.RET

 2. T1 S(PF)
    T2 S(ACTIVE) T.ACT, T.RET

 3. T1 S(INACTIVE)
    T2 S(ACTIVE) T.ACT, T.RET

 5. T1 S(INACTIVE)
    T2 S(PF) T.ACT, T.RET

[ 5.1 T1 S(INACTIVE)
      T2 S(INACTIVE) T.ACT, T.RET ]

 6. T1 S(INACTIVE)
    T2 S(ACTIVE) T.ACT, T.RET

 7. T1 S(ACTIVE) T.ACT
    T2 S(ACTIVE) T.RET

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 11:31:30 -07:00
Daniel Borkmann ea4f19c1f8 net: sctp: spare unnecessary comparison in sctp_trans_elect_best
When both transports are the same, we don't have to go down that
road only to realize that we will return the very same transport.
We are guaranteed that curr is always non-NULL. Therefore, just
short-circuit this special case.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 11:31:30 -07:00
Jiri Benc 2ba5af42a7 openvswitch: fix panic with multiple vlan headers
When there are multiple vlan headers present in a received frame, the first
one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the
skb beyond the VLAN TPID may be still non-linear, including the inner TCI
and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it
does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is
executed, __pop_vlan_tci pulls the next vlan header into vlan_tci.

This leads to two things:

1. Part of the resulting ethernet header is in the non-linear part of the
   skb. When eth_type_trans is called later as the result of
   OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci
   is in fact accessing random data when it reads past the TPID.

2. network_header points into the ethernet header instead of behind it.
   mac_len is set to a wrong value (10), too.

Reported-by: Yulong Pei <ypei@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 11:24:04 -07:00
Benjamin Block 793c3b4000 net: ipv6: fib: don't sleep inside atomic lock
The function fib6_commit_metrics() allocates a piece of memory in mode
GFP_KERNEL while holding an atomic lock from higher up in the stack, in
the function __ip6_ins_rt(). This produces the following BUG:

> BUG: sleeping function called from invalid context at mm/slub.c:1250
> in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: dhcpcd
> 2 locks held by dhcpcd/2909:
>  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81978e67>] rtnl_lock+0x17/0x20
>  #1:  (&tb->tb6_lock){++--+.}, at: [<ffffffff81a6951a>] ip6_route_add+0x65a/0x800
> CPU: 1 PID: 2909 Comm: dhcpcd Not tainted 3.17.0-rc1 #1
> Hardware name: ASUS All Series/Q87T, BIOS 0216 10/16/2013
>  0000000000000008 ffff8800c8f13858 ffffffff81af135a 0000000000000000
>  ffff880212202430 ffff8800c8f13878 ffffffff810f8d3a ffff880212202c98
>  0000000000000010 ffff8800c8f138c8 ffffffff8121ad0e 0000000000000001
> Call Trace:
>  [<ffffffff81af135a>] dump_stack+0x4e/0x68
>  [<ffffffff810f8d3a>] __might_sleep+0x10a/0x120
>  [<ffffffff8121ad0e>] kmem_cache_alloc_trace+0x4e/0x190
>  [<ffffffff81a6bcd6>] ? fib6_commit_metrics+0x66/0x110
>  [<ffffffff81a6bcd6>] fib6_commit_metrics+0x66/0x110
>  [<ffffffff81a6cbf3>] fib6_add+0x883/0xa80
>  [<ffffffff81a6951a>] ? ip6_route_add+0x65a/0x800
>  [<ffffffff81a69535>] ip6_route_add+0x675/0x800
>  [<ffffffff81a68f2a>] ? ip6_route_add+0x6a/0x800
>  [<ffffffff81a6990c>] inet6_rtm_newroute+0x5c/0x80
>  [<ffffffff8197cf01>] rtnetlink_rcv_msg+0x211/0x260
>  [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20
>  [<ffffffff81119708>] ? lock_release_holdtime+0x28/0x180
>  [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20
>  [<ffffffff8197ccf0>] ? __rtnl_unlock+0x20/0x20
>  [<ffffffff819a989e>] netlink_rcv_skb+0x6e/0xd0
>  [<ffffffff81978ee5>] rtnetlink_rcv+0x25/0x40
>  [<ffffffff819a8e59>] netlink_unicast+0xd9/0x180
>  [<ffffffff819a9600>] netlink_sendmsg+0x700/0x770
>  [<ffffffff81103735>] ? local_clock+0x25/0x30
>  [<ffffffff8194e83c>] sock_sendmsg+0x6c/0x90
>  [<ffffffff811f98e3>] ? might_fault+0xa3/0xb0
>  [<ffffffff8195ca6d>] ? verify_iovec+0x7d/0xf0
>  [<ffffffff8194ec3e>] ___sys_sendmsg+0x37e/0x3b0
>  [<ffffffff8111ef15>] ? trace_hardirqs_on_caller+0x185/0x220
>  [<ffffffff81af979e>] ? mutex_unlock+0xe/0x10
>  [<ffffffff819a55ec>] ? netlink_insert+0xbc/0xe0
>  [<ffffffff819a65e5>] ? netlink_autobind.isra.30+0x125/0x150
>  [<ffffffff819a6520>] ? netlink_autobind.isra.30+0x60/0x150
>  [<ffffffff819a84f9>] ? netlink_bind+0x159/0x230
>  [<ffffffff811f989a>] ? might_fault+0x5a/0xb0
>  [<ffffffff8194f25e>] ? SYSC_bind+0x7e/0xd0
>  [<ffffffff8194f8cd>] __sys_sendmsg+0x4d/0x80
>  [<ffffffff8194f912>] SyS_sendmsg+0x12/0x20
>  [<ffffffff81afc692>] system_call_fastpath+0x16/0x1b

Fixing this by replacing the mode GFP_KERNEL with GFP_ATOMIC.

Signed-off-by: Benjamin Block <bebl@mageta.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 10:54:49 -07:00
zhuyj 061079ac0b sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probe
Since the transport has always been in state SCTP_UNCONFIRMED, it
therefore wasn't active before and hasn't been used before, and it
always has been, so it is unnecessary to bug the user with a
notification.

Reported-by: Deepak Khandelwal <khandelwal.deepak.1987@gmail.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Suggested-by: Michael Tuexen <tuexen@fh-muenster.de>
Suggested-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Zhu Yanjun <Yanjun.Zhu@windriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21 21:33:17 -07:00
Eric Dumazet dc808110bb packet: handle too big packets for PACKET_V3
af_packet can currently overwrite kernel memory by out of bound
accesses, because it assumed a [new] block can always hold one frame.

This is not generally the case, even if most existing tools do it right.

This patch clamps too long frames as API permits, and issue a one time
error on syslog.

[  394.357639] tpacket_rcv: packet too big, clamped from 5042 to 3966. macoff=82

In this example, packet header tp_snaplen was set to 3966,
and tp_len was set to 5042 (skb->len)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: f6fb8f100b ("af-packet: TPACKET_V3 flexible buffer implementation.")
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21 16:44:28 -07:00
chas williams - CONTRACTOR 6df378d2d1 lec: Use rtnl lock/unlock when updating MTU
The LECS response contains the MTU that should be used.  Correctly
synchronize with other layers when updating.

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21 16:31:23 -07:00
David S. Miller 02784f1b05 tipc: Fix build.
Missing semicolon in range check fix.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-19 11:16:38 -07:00
Vasily Averin 7201c1ddf7 cbq: now_rt removal
Now q->now_rt is identical to q->now and is not required anymore.

Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-19 10:58:44 -07:00
Vasily Averin 73d0f37ac4 cbq: incorrectly low bandwidth setting blocks limited traffic
Mainstream commit f0f6ee1f70 ("cbq: incorrect processing of high limits")
have side effect: if cbq bandwidth setting is less than real interface
throughput non-limited traffic can delay limited traffic for a very long time.

This happen because of q->now changes incorrectly in cbq_dequeue():
in described scenario L2T is much greater than real time delay,
and q->now gets an extra boost for each transmitted packet.

Accumulated boost prevents update q->now, and blocked class can wait
very long time until (q->now >= cl->undertime) will be true again.

To fix the problem the patch updates q->now on each cbq_update() call.
L2T-related pre-modification q->now was moved to cbq_update().

My testing confirmed that it fixes the problem and did not discover
any side-effects

Fixes: f0f6ee1f70 ("cbq: incorrect processing of high limits")

Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-19 10:58:44 -07:00
Erik Hugne ac32c7f705 tipc: fix message importance range check
Commit 3b4f302d85 ("tipc: eliminate
redundant locking") introduced a bug by removing the sanity check
for message importance, allowing programs to assign any value to
the msg_user field. This will mess up the packet reception logic
and may cause random link resets.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-16 20:17:34 -07:00
Sven Eckelmann e050dbeb0d batman-adv: Fix parameter order of hlist_add_behind
1d023284c3 ("list: fix order of arguments for
hlist_add_after(_rcu)") was incorrectly rebased on top of
d9124268d8 ("batman-adv: Fix out-of-order
fragmentation support"). The parameter order change of the rebased patch was
not re-applied as expected. This causes a memory leak and can cause crashes
when out-of-order packets are received. hlist_add_behind will try to access the
uninitalized list pointers of frag_entry_new to find the previous/next entry
and may modify/read random memory locations.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-16 19:19:08 -07:00
Thomas Graf 9ce12eb16f netlink: Annotate RCU locking for seq_file walker
Silences the following sparse warnings:
net/netlink/af_netlink.c:2926:21: warning: context imbalance in 'netlink_seq_start' - wrong count at exit
net/netlink/af_netlink.c:2972:13: warning: context imbalance in 'netlink_seq_stop' - unexpected unlock

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 15:13:40 -07:00
Neal Cardwell 0c9ab09223 tcp: fix ssthresh and undo for consecutive short FRTO episodes
Fix TCP FRTO logic so that it always notices when snd_una advances,
indicating that any RTO after that point will be a new and distinct
loss episode.

Previously there was a very specific sequence that could cause FRTO to
fail to notice a new loss episode had started:

(1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue
(2) receiver ACKs packet 1
(3) FRTO sends 2 more packets
(4) RTO timer fires again (should start a new loss episode)

The problem was in step (3) above, where tcp_process_loss() returned
early (in the spot marked "Step 2.b"), so that it never got to the
logic to clear icsk_retransmits. Thus icsk_retransmits stayed
non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero
icsk_retransmits, decide that this RTO is not a new episode, and
decide not to cut ssthresh and remember the current cwnd and ssthresh
for undo.

There were two main consequences to the bug that we have
observed. First, ssthresh was not decreased in step (4). Second, when
there was a series of such FRTO (1-4) sequences that happened to be
followed by an FRTO undo, we would restore the cwnd and ssthresh from
before the entire series started (instead of the cwnd and ssthresh
from before the most recent RTO). This could result in cwnd and
ssthresh being restored to values much bigger than the proper values.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: e33099f96d ("tcp: implement RFC5682 F-RTO")
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 14:38:55 -07:00
Hannes Frederic Sowa a26552afe8 tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic
tcp_tw_recycle heavily relies on tcp timestamps to build a per-host
ordering of incoming connections and teardowns without the need to
hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for
the last measured RTO. To do so, we keep the last seen timestamp in a
per-host indexed data structure and verify if the incoming timestamp
in a connection request is strictly greater than the saved one during
last connection teardown. Thus we can verify later on that no old data
packets will be accepted by the new connection.

During moving a socket to time-wait state we already verify if timestamps
where seen on a connection. Only if that was the case we let the
time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN
will be used. But we don't verify this on incoming SYN packets. If a
connection teardown was less than TCP_PAWS_MSL seconds in the past we
cannot guarantee to not accept data packets from an old connection if
no timestamps are present. We should drop this SYN packet. This patch
closes this loophole.

Please note, this patch does not make tcp_tw_recycle in any way more
usable but only adds another safety check:
Sporadic drops of SYN packets because of reordering in the network or
in the socket backlog queues can happen. Users behing NAT trying to
connect to a tcp_tw_recycle enabled server can get caught in blackholes
and their connection requests may regullary get dropped because hosts
behind an address translator don't have synchronized tcp timestamp clocks.
tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled.

In general, use of tcp_tw_recycle is disadvised.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 14:38:54 -07:00
Neal Cardwell 4fab907195 tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()
Make sure we use the correct address-family-specific function for
handling MTU reductions from within tcp_release_cb().

Previously AF_INET6 sockets were incorrectly always using the IPv6
code path when sometimes they were handling IPv4 traffic and thus had
an IPv4 dst.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Willem de Bruijn <willemb@google.com>
Fixes: 563d34d057 ("tcp: dont drop MTU reduction indications")
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 14:38:54 -07:00
Shmulik Ladkani bc8fc7b8f8 sit: Fix ipip6_tunnel_lookup device matching criteria
As of 4fddbf5d78 ("sit: strictly restrict incoming traffic to tunnel link device"),
when looking up a tunnel, tunnel's underlying interface (t->parms.link)
is verified to match incoming traffic's ingress device.

However the comparison was incorrectly based on skb->dev->iflink.

Instead, dev->ifindex should be used, which correctly represents the
interface from which the IP stack hands the ipip6 packets.

This allows setting up sit tunnels bound to vlan interfaces (otherwise
incoming ipip6 traffic on the vlan interface was dropped due to
ipip6_tunnel_lookup match failure).

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 14:38:54 -07:00
Andrey Vagin 9d186cac7f tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)
We don't know right timestamp for repaired skb-s. Wrong RTT estimations
isn't good, because some congestion modules heavily depends on it.

This patch adds the TCPCB_REPAIRED flag, which is included in
TCPCB_RETRANS.

Thanks to Eric for the advice how to fix this issue.

This patch fixes the warning:
[  879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380()
[  879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1
[  879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  879.568177]  0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2
[  879.568776]  0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80
[  879.569386]  ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc
[  879.569982] Call Trace:
[  879.570264]  [<ffffffff817aa2d2>] dump_stack+0x4d/0x66
[  879.570599]  [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0
[  879.570935]  [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20
[  879.571292]  [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380
[  879.571614]  [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710
[  879.571958]  [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370
[  879.572315]  [<ffffffff81657459>] release_sock+0x89/0x1d0
[  879.572642]  [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860
[  879.573000]  [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80
[  879.573352]  [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40
[  879.573678]  [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20
[  879.574031]  [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0
[  879.574393]  [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b
[  879.574730] ---[ end trace a17cbc38eb8c5c00 ]---

v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit,
    where it's set for other skb-s.

Fixes: 431a91242d ("tcp: timestamp SYN+DATA messages")
Fixes: 740b0f1841 ("tcp: switch rtt estimations to usec resolution")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 14:38:54 -07:00
Willem de Bruijn 490cc7d03c net-timestamp: fix missing tcp fragmentation cases
Bytestream timestamps are correlated with a single byte in the skbuff,
recorded in skb_shinfo(skb)->tskey. When fragmenting skbuffs, ensure
that the tskey is set for the fragment in which the tskey falls
(seqno <= tskey < end_seqno).

The original implementation did not address fragmentation in
tcp_fragment or tso_fragment. Add code to inspect the sequence numbers
and move both tskey and the relevant tx_flags if necessary.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:06:06 -07:00
Willem de Bruijn 712a72213f net-timestamp: fix missing ACK timestamp
ACK timestamps are generated in tcp_clean_rtx_queue. The TSO datapath
can break out early, causing the timestamp code to be skipped. Move
the code up before the break.

Reported-by: David S. Miller <davem@davemloft.net>

Also fix a boundary condition: tp->snd_una is the next unacknowledged
byte and between tests inclusive (a <= b <= c), so generate a an ACK
timestamp if (prior_snd_una <= tskey <= tp->snd_una - 1).

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:06:06 -07:00
Maks Naumov efd5029010 irda: Fix rd_frame control field initialization in irlap_send_rd_frame()
Signed-off-by: Maks Naumov <maksqwe1@ukr.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:05:52 -07:00
chas williams - CONTRACTOR 8356f9d564 lec: Fix bug introduced by b67bfe0d42
b67bfe0d42 (hlist: drop the node
parameter from iterators) dropped the node parameter from
iterators which lec_tbl_walk() was using to iterate the list.

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:04:46 -07:00
chas williams - CONTRACTOR de713b5794 atm/svc: Fix blocking in wait loop
One should not call blocking primitives inside a wait loop, since both
require task_struct::state to sleep, so the inner will destroy the
outer state.

sigd_enq() will possibly sleep for alloc_skb().  Move sigd_enq() before
prepare_to_wait() to avoid sleeping while waiting interruptibly.  You do
not actually need to call sigd_enq() after the initial prepare_to_wait()
because we test the termination condition before calling schedule().

Based on suggestions from Peter Zijlstra.

Signed-off-by: Chas Williams <chas@cmf.n4rl.navy.mil>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:04:46 -07:00
Christoph Jaeger 3791b3f6fb openvswitch: Fix memory leak in ovs_vport_alloc() error path
ovs_vport_alloc() bails out without freeing the memory 'vport' points to.

Picked up by Coverity - CID 1230503.

Fixes: 5cd667b0a4 ("openvswitch: Allow each vport to have an array of 'port_id's.")
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:04:46 -07:00
Linus Torvalds f0094b28f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Several networking final fixes and tidies for the merge window:

   1) Changes during the merge window unintentionally took away the
      ability to build bluetooth modular, fix from Geert Uytterhoeven.

   2) Several phy_node reference count bug fixes from Uwe Kleine-König.

   3) Fix ucc_geth build failures, also from Uwe Kleine-König.

   4) Fix klog false positivies when netlink messages go to network
      taps, by properly resetting the network header.  Fix from Daniel
      Borkmann.

   5) Sizing estimate of VF netlink messages is too small, from Jiri
      Benc.

   6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian.

   7) VLAN untagging is erroneously dependent upon whether the VLAN
      module is loaded or not, but there are generic dependencies that
      matter wrt what can be expected as the SKB enters the stack.
      Make the basic untagging generic code, and do it unconditionally.
      From Vlad Yasevich.

   8) xen-netfront only has so many slots in it's transmit queue so
      linearize packets that have too many frags.  From Zoltan Kiss.

   9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian
      Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits)
  net: bcmgenet: correctly resume adapter from Wake-on-LAN
  net: bcmgenet: update UMAC_CMD only when link is detected
  net: bcmgenet: correctly suspend and resume PHY device
  net: bcmgenet: request and enable main clock earlier
  net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call
  xen-netfront: Fix handling packets on compound pages with skb_linearize
  net: fec: Support phys probed from devicetree and fixed-link
  smsc: replace WARN_ON() with WARN_ON_SMP()
  xen-netback: Don't deschedule NAPI when carrier off
  net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile
  wan: wanxl: Remove typedefs from struct names
  m68k/atari: EtherNEC - ethernet support (ne)
  net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call
  hdlc: Remove typedefs from struct names
  airo_cs: Remove typedef local_info_t
  atmel: Remove typedef atmel_priv_ioctl
  com20020_cs: Remove typedef com20020_dev_t
  ethernet: amd: Remove typedef local_info_t
  net: Always untag vlan-tagged traffic on input.
  drivers: net: Add APM X-Gene SoC ethernet driver support.
  ...
2014-08-13 18:27:40 -06:00
Linus Torvalds 06b8ab5528 NFS client updates for Linux 3.17
Highlights include:
 
 - Stable fix for a bug in nfs3_list_one_acl()
 - Speed up NFS path walks by supporting LOOKUP_RCU
 - More read/write code cleanups
 - pNFS fixes for layout return on close
 - Fixes for the RCU handling in the rpcsec_gss code
 - More NFS/RDMA fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT65zoAAoJEGcL54qWCgDyvq8QAJ+OKuC5dpngrZ13i4ZJIcK1
 TJSkWCr44FhYPlrmkLCntsGX6C0376oFEtJ5uqloqK0+/QtvwRNVSQMKaJopKIVY
 mR4En0WwpigxVQdW2lgto6bfOhzMVO+llVdmicEVrU8eeSThATxGNv7rxRzWorvL
 RX3TwBkWSc0kLtPi66VRFQ1z+gg5I0kngyyhsKnLOaHHtpTYP2JDZlRPRkokXPUg
 nmNedmC3JrFFkarroFIfYr54Qit2GW/eI2zVhOwHGCb45j4b2wntZ6wr7LpUdv3A
 OGDBzw59cTpcx3Hij9CFvLYVV9IJJHBNd2MJqdQRtgWFfs+aTkZdk4uilUJCIzZh
 f4BujQAlm/4X1HbPxsSvkCRKga7mesGM7e0sBDPHC1vu0mSaY1cakcj2kQLTpbQ7
 gqa1cR3pZ+4shCq37cLwWU0w1yElYe1c4otjSCttPCrAjXbXJZSFzYnHm8DwKROR
 t+yEDRL5BIXPu1nEtSnD2+xTQ3vUIYXooZWEmqLKgRtBTtPmgSn9Vd8P1OQXmMNo
 VJyFXyjNx5WH06Wbc/jLzQ1/cyhuPmJWWyWMJlVROyv+FXk9DJUFBZuTkpMrIPcF
 NlBXLV1GnA7PzMD9Xt9bwqteERZl6fOUDJLWS9P74kTk5c2kD+m+GaqC/rBTKKXc
 ivr2s7aIDV48jhnwBSVL
 =KE07
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for a bug in nfs3_list_one_acl()
   - speed up NFS path walks by supporting LOOKUP_RCU
   - more read/write code cleanups
   - pNFS fixes for layout return on close
   - fixes for the RCU handling in the rpcsec_gss code
   - more NFS/RDMA fixes"

* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  nfs: reject changes to resvport and sharecache during remount
  NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
  SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
  NFS: fix two problems in lookup_revalidate in RCU-walk
  NFS: allow lockless access to access_cache
  NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
  NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
  NFS: support RCU_WALK in nfs_permission()
  sunrpc/auth: allow lockless (rcu) lookup of credential cache.
  NFS: prepare for RCU-walk support but pushing tests later in code.
  NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
  NFS: add checks for returned value of try_module_get()
  nfs: clear_request_commit while holding i_lock
  pnfs: add pnfs_put_lseg_async
  pnfs: find swapped pages on pnfs commit lists too
  nfs: fix comment and add warn_on for PG_INODE_REF
  nfs: check wait_on_bit_lock err in page_group_lock
  sunrpc: remove "ec" argument from encrypt_v2 operation
  sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
  sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
  ...
2014-08-13 18:13:19 -06:00
Linus Torvalds 8d2d441ac4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "There is a lot of refactoring and hardening of the libceph and rbd
  code here from Ilya that fix various smaller bugs, and a few more
  important fixes with clone overlap.  The main fix is a critical change
  to the request_fn handling to not sleep that was exposed by the recent
  mutex changes (which will also go to the 3.16 stable series).

  Yan Zheng has several fixes in here for CephFS fixing ACL handling,
  time stamps, and request resends when the MDS restarts.

  Finally, there are a few cleanups from Himangi Saraogi based on
  Coccinelle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
  rbd: remove extra newlines from rbd_warn() messages
  rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC
  rbd: rework rbd_request_fn()
  ceph: fix kick_requests()
  ceph: fix append mode write
  ceph: fix sizeof(struct tYpO *) typo
  ceph: remove redundant memset(0)
  rbd: take snap_id into account when reading in parent info
  rbd: do not read in parent info before snap context
  rbd: update mapping size only on refresh
  rbd: harden rbd_dev_refresh() and callers a bit
  rbd: split rbd_dev_spec_update() into two functions
  rbd: remove unnecessary asserts in rbd_dev_image_probe()
  rbd: introduce rbd_dev_header_info()
  rbd: show the entire chain of parent images
  ceph: replace comma with a semicolon
  rbd: use rbd_segment_name_free() instead of kfree()
  ceph: check zero length in ceph_sync_read()
  ceph: reset r_resend_mds after receiving -ESTALE
  ...
2014-08-13 17:43:29 -06:00
Vlad Yasevich 0d5501c1c8 net: Always untag vlan-tagged traffic on input.
Currently the functionality to untag traffic on input resides
as part of the vlan module and is build only when VLAN support
is enabled in the kernel.  When VLAN is disabled, the function
vlan_untag() turns into a stub and doesn't really untag the
packets.  This seems to create an interesting interaction
between VMs supporting checksum offloading and some network drivers.

There are some drivers that do not allow the user to change
tx-vlan-offload feature of the driver.  These drivers also seem
to assume that any VLAN-tagged traffic they transmit will
have the vlan information in the vlan_tci and not in the vlan
header already in the skb.  When transmitting skbs that already
have tagged data with partial checksum set, the checksum doesn't
appear to be updated correctly by the card thus resulting in a
failure to establish TCP connections.

The following is a packet trace taken on the receiver where a
sender is a VM with a VLAN configued.  The host VM is running on
doest not have VLAN support and the outging interface on the
host is tg3:
10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294837885 ecr 0,nop,wscale 7], length 0
10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294838888 ecr 0,nop,wscale 7], length 0

This connection finally times out.

I've only access to the TG3 hardware in this configuration thus have
only tested this with TG3 driver.  There are a lot of other drivers
that do not permit user changes to vlan acceleration features, and
I don't know if they all suffere from a similar issue.

The patch attempt to fix this another way.  It moves the vlan header
stipping code out of the vlan module and always builds it into the
kernel network core.  This way, even if vlan is not supported on
a virtualizatoin host, the virtual machines running on top of such
host will still work with VLANs enabled.

CC: Patrick McHardy <kaber@trash.net>
CC: Nithin Nayak Sujir <nsujir@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11 12:16:51 -07:00
David S. Miller f00439e2e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains fixes for your net tree, they are:

1) Unitialize the set element key and data from the commit path,
   otherwise this leaks chain refcount if the transaction is aborted,
   reported by Thomas Graf.

2) Fix crash when updating chains without no counters in nf_tables,
   this slipped through in the new transaction infrastructure, reported
   by Matteo Croce.

3) Replace all mutex_lock_interruptible() by mutex_lock() in the Netfilter
   tree, suggested by Patrick McHardy. This implicitly fixes the problem
   that Eric Dumazet reported in: http://patchwork.ozlabs.org/patch/373076/

4) Fix error return code in nf_tables when deleting set element in
   nf_tables if the transaction cannot be allocated, from Julia Lawall.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11 10:26:15 -07:00
Linus Torvalds 77e40aae76 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
 "This is a bunch of small changes built against 3.16-rc6.  The most
  significant change for users is the first patch which makes setns
  drmatically faster by removing unneded rcu handling.

  The next chunk of changes are so that "mount -o remount,.." will not
  allow the user namespace root to drop flags on a mount set by the
  system wide root.  Aks this forces read-only mounts to stay read-only,
  no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec
  mounts to stay no exec and it prevents unprivileged users from messing
  with a mounts atime settings.  I have included my test case as the
  last patch in this series so people performing backports can verify
  this change works correctly.

  The next change fixes a bug in NFS that was discovered while auditing
  nsproxy users for the first optimization.  Today you can oops the
  kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever
  with pid namespaces.  I rebased and fixed the build of the
  !CONFIG_NFS_FS case yesterday when a build bot caught my typo.  Given
  that no one to my knowledge bases anything on my tree fixing the typo
  in place seems more responsible that requiring a typo-fix to be
  backported as well.

  The last change is a small semantic cleanup introducing
  /proc/thread-self and pointing /proc/mounts and /proc/net at it.  This
  prevents several kinds of problemantic corner cases.  It is a
  user-visible change so it has a minute chance of causing regressions
  so the change to /proc/mounts and /proc/net are individual one line
  commits that can be trivially reverted.  Unfortunately I lost and
  could not find the email of the original reporter so he is not
  credited.  From at least one perspective this change to /proc/net is a
  refgression fix to allow pthread /proc/net uses that were broken by
  the introduction of the network namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts
  proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net
  proc: Implement /proc/thread-self to point at the directory of the current thread
  proc: Have net show up under /proc/<tgid>/task/<tid>
  NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes
  mnt: Add tests for unprivileged remount cases that have found to be faulty
  mnt: Change the default remount atime from relatime to the existing value
  mnt: Correct permission checks in do_remount
  mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
  mnt: Only change user settable mount flags in remount
  namespaces: Use task_lock and not rcu to protect nsproxy
2014-08-09 17:10:41 -07:00
Linus Torvalds 0d10c2c170 Merge branch 'for-3.17' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "This includes a major rewrite of the NFSv4 state code, which has
  always depended on a single mutex.  As an example, open creates are no
  longer serialized, fixing a performance regression on NFSv3->NFSv4
  upgrades.  Thanks to Jeff, Trond, and Benny, and to Christoph for
  review.

  Also some RDMA fixes from Chuck Lever and Steve Wise, and
  miscellaneous fixes from Kinglong Mee and others"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
  svcrdma: remove rdma_create_qp() failure recovery logic
  nfsd: add some comments to the nfsd4 object definitions
  nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
  nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
  nfsd: remove nfs4_lock_state: nfs4_laundromat
  nfsd: Remove nfs4_lock_state(): reclaim_complete()
  nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
  nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
  nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
  nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
  nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
  nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
  nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
  nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
  nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
  nfsd: remove old fault injection infrastructure
  nfsd: add more granular locking to *_delegations fault injectors
  nfsd: add more granular locking to forget_openowners fault injector
  nfsd: add more granular locking to forget_locks fault injector
  nfsd: add a list_head arg to nfsd_foreach_client_lock
  ...
2014-08-09 14:31:18 -07:00
Ilya Dryomov 5f740d7e15 libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
Determining ->last_piece based on the value of ->page_offset + length
is incorrect because length here is the length of the entire message.
->last_piece set to false even if page array data item length is <=
PAGE_SIZE, which results in invalid length passed to
ceph_tcp_{send,recv}page() and causes various asserts to fire.

    # cat pages-cursor-init.sh
    #!/bin/bash
    rbd create --size 10 --image-format 2 foo
    FOO_DEV=$(rbd map foo)
    dd if=/dev/urandom of=$FOO_DEV bs=1M &>/dev/null
    rbd snap create foo@snap
    rbd snap protect foo@snap
    rbd clone foo@snap bar
    # rbd_resize calls librbd rbd_resize(), size is in bytes
    ./rbd_resize bar $(((4 << 20) + 512))
    rbd resize --size 10 bar
    BAR_DEV=$(rbd map bar)
    # trigger a 512-byte copyup -- 512-byte page array data item
    dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5

The problem exists only in ceph_msg_data_pages_cursor_init(),
ceph_msg_data_pages_advance() does the right thing.  The size_t cast is
unnecessary.

Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-08-09 11:27:32 +04:00
Jiri Benc 945a36761f rtnetlink: fix VF info size
Commit 1d8faf48c7 ("net/core: Add VF link state control") added new
attribute to IFLA_VF_INFO group in rtnl_fill_ifinfo but did not adjust size
of the allocated memory in if_nlmsg_size/rtnl_vfinfo_size. As the result, we
may trigger warnings in rtnl_getlink and similar functions when many VF
links are enabled, as the information does not fit into the allocated skb.

Fixes: 1d8faf48c7 ("net/core: Add VF link state control")
Reported-by: Yulong Pei <ypei@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-08 10:28:09 -07:00
Niv Yehezkel b7a71b51ee ipv4: removed redundant conditional
Since fib_lookup cannot return ESRCH no longer,
checking for this error code is no longer neccesary.

Signed-off-by: Niv Yehezkel <executerx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-08 10:22:22 -07:00
Julia Lawall 609ccf0877 netfilter: nf_tables: fix error return code
Convert a zero return value on error to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-08-08 16:47:29 +02:00
Pablo Neira Ayuso 7926dbfa4b netfilter: don't use mutex_lock_interruptible()
Eric Dumazet reports that getsockopt() or setsockopt() sometimes
returns -EINTR instead of -ENOPROTOOPT, causing headaches to
application developers.

This patch replaces all the mutex_lock_interruptible() by mutex_lock()
in the netfilter tree, as there is no reason we should sleep for a
long time there.

Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
2014-08-08 16:47:23 +02:00
Pablo Neira Ayuso b88825de85 netfilter: nf_tables: don't update chain with unset counters
Fix possible replacement of the per-cpu chain counters by null
pointer when updating an existing chain in the commit path.

Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-08-08 15:38:50 +02:00
Pablo Neira Ayuso a3716e70e1 netfilter: nf_tables: uninitialize element key/data from the commit path
This should happen once the element has been effectively released in
the commit path, not before. This fixes a possible chain refcount leak
if the transaction is aborted.

Reported-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-08-08 15:38:46 +02:00
Daniel Borkmann 4e48ed883c netlink: reset network header before passing to taps
netlink doesn't set any network header offset thus when the skb is
being passed to tap devices via dev_queue_xmit_nit(), it emits klog
false positives due to it being unset like:

  ...
  [  124.990397] protocol 0000 is buggy, dev nlmon0
  [  124.990411] protocol 0000 is buggy, dev nlmon0
  ...

So just reset the network header before passing to the device; for
packet sockets that just means nothing will change - mac and net
offset hold the same value just as before.

Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07 16:02:58 -07:00
Jean Sacren 0a4dd0d786 batman: fix duplicate #include of multicast.h
The header multicast.h was included twice, so delete one of them.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <antonio@meshcoding.com>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07 16:02:57 -07:00
Jean Sacren 2072ec846a openvswitch: fix duplicate #include headers
The #include headers net/genetlink.h and linux/genetlink.h both were
included twice, so delete each of the duplicate.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: dev@openvswitch.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07 16:02:57 -07:00
Geert Uytterhoeven 2d177f3113 6lowpan: Allow 6LoWPAN to be modular
Change config symbol 6LOWPAN from type bool to type tristate, so
6LoWPAN can be built modular, just like IPV6

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07 11:44:18 -07:00
Linus Torvalds 33caee3992 Merge branch 'akpm' (patchbomb from Andrew Morton)
Merge incoming from Andrew Morton:
 - Various misc things.
 - arch/sh updates.
 - Part of ocfs2.  Review is slow.
 - Slab updates.
 - Most of -mm.
 - printk updates.
 - lib/ updates.
 - checkpatch updates.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
  checkpatch: update $declaration_macros, add uninitialized_var
  checkpatch: warn on missing spaces in broken up quoted
  checkpatch: fix false positives for --strict "space after cast" test
  checkpatch: fix false positive MISSING_BREAK warnings with --file
  checkpatch: add test for native c90 types in unusual order
  checkpatch: add signed generic types
  checkpatch: add short int to c variable types
  checkpatch: add for_each tests to indentation and brace tests
  checkpatch: fix brace style misuses of else and while
  checkpatch: add --fix option for a couple OPEN_BRACE misuses
  checkpatch: use the correct indentation for which()
  checkpatch: add fix_insert_line and fix_delete_line helpers
  checkpatch: add ability to insert and delete lines to patch/file
  checkpatch: add an index variable for fixed lines
  checkpatch: warn on break after goto or return with same tab indentation
  checkpatch: emit a warning on file add/move/delete
  checkpatch: add test for commit id formatting style in commit log
  checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
  checkpatch: improve "no space after cast" test
  checkpatch: allow multiple const * types
  ...
2014-08-06 21:14:42 -07:00
Thomas Graf 6c8f7e7083 netlink: hold nl_sock_hash_lock during diag dump
Although RCU protection would be possible during diag dump, doing
so allows for concurrent table mutations which can render the
in-table offset between individual Netlink messages invalid and
thus cause legitimate sockets to be skipped in the dump.

Since the diag dump is relatively low volume and consistency is
more important than performance, the table mutex is held during
dump.

Reported-by: Andrey Wagin <avagin@gmail.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06 19:17:44 -07:00
Ken Helias 1d023284c3 list: fix order of arguments for hlist_add_after(_rcu)
All other add functions for lists have the new item as first argument
and the position where it is added as second argument.  This was changed
for no good reason in this function and makes using it unnecessary
confusing.

The name was changed to hlist_add_behind() to cause unconverted code to
generate a compile error instead of using the wrong parameter order.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ken Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>	[intel driver bits]
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Dmitry Popov 9ea88a1530 tcp: md5: check md5 signature without socket lock
Since a8afca032 (tcp: md5: protects md5sig_info with RCU) tcp_md5_do_lookup
doesn't require socket lock, rcu_read_lock is enough. Therefore socket lock is
no longer required for tcp_v{4,6}_inbound_md5_hash too, so we can move these
calls (wrapped with rcu_read_{,un}lock) before bh_lock_sock:
from tcp_v{4,6}_do_rcv to tcp_v{4,6}_rcv.

Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06 16:00:20 -07:00
Willem de Bruijn f066e2b091 net-timestamp: cumulative tcp timestamping fixes
A set of small fixes pointed out just after the merge:
- make tcp_tx_timestamp static
- make tcp_gso_tstamp static
- use before() to compare TCP seqno, instead of cast to u64
- add tstamp to tx_flags in GSO, instead of overwrite tx_flags
- record skb_shinfo(skb)->tskey for all timestamps, also HW.
- optimization in tcp_tx_timestamp:
  call sock_tx_timestamp only if a tstamp option is set.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06 14:09:01 -07:00
Eric Dumazet 140c55d4b5 net-timestamp: sock_tx_timestamp() fix
sock_tx_timestamp() should not ignore initial *tx_flags value, as TCP
stack can store SKBTX_SHARED_FRAG in it.

Also first argument (struct sock *) can be const.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06 12:38:07 -07:00
Linus Torvalds ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00