Pull networking updates from David Miller:
1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
co. at Google. https://lwn.net/Articles/701165/
2) Do TCP Small Queues for retransmits, from Eric Dumazet.
3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
Starovoitov.
4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.
5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.
6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.
7) Support ndo_poll_controller in mlx5, from Calvin Owens.
8) Move VRF processing to an output hook and allow l3mdev to be
loopback, from David Ahern.
9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.
10) Congestion control in RXRPC, from David Howells.
11) Support geneve RX offload in ixgbe, from Emil Tantilov.
12) When hitting pressure for new incoming TCP data SKBs, perform a
partial rathern than a full purge of the OFO queue (which could be
huge). From Eric Dumazet.
13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.
14) Support RX network flow classification to igb, from Gangfeng Huang.
15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.
16) New skbmod packet action, from Jamal Hadi Salim.
17) Remove some inefficiencies in snmp proc output, from Jia He.
18) Add FIB notifications to properly propagate route changes to
hardware which is doing forwarding offloading. From Jiri Pirko.
19) New dsa driver for qca8xxx chips, from John Crispin.
20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
Żenczykowski.
21) Add L3 mode to ipvlan, from Mahesh Bandewar.
22) Support 802.1ad in mlx4, from Moshe Shemesh.
23) Support hardware LRO in mediatek driver, from Nelson Chang.
24) Add TC offloading to mlx5, from Or Gerlitz.
25) Convert various drivers to ethtool ksettings interfaces, from
Philippe Reynes.
26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.
27) NAPI support for ath10k, from Rajkumar Manoharan.
28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.
29) UDP replicast support in TIPC, from Richard Alpe.
30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.
31) Support BQL in thunderx driver, from Sunil Goutham.
32) TSO support in alx driver, from Tobias Regnery.
33) Add stream parser engine and use it in kcm.
34) Support async DHCP replies in ipconfig module, from Uwe
Kleine-König.
35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
mlxsw: switchx2: Fix misuse of hard_header_len
mlxsw: spectrum: Fix misuse of hard_header_len
net/faraday: Stop NCSI device on shutdown
net/ncsi: Introduce ncsi_stop_dev()
net/ncsi: Rework the channel monitoring
net/ncsi: Allow to extend NCSI request properties
net/ncsi: Rework request index allocation
net/ncsi: Don't probe on the reserved channel ID (0x1f)
net/ncsi: Introduce NCSI_RESERVED_CHANNEL
net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
net: Add netdev all_adj_list refcnt propagation to fix panic
net: phy: Add Edge-rate driver for Microsemi PHYs.
vmxnet3: Wake queue from reset work
i40e: avoid NULL pointer dereference and recursive errors on early PCI error
qed: Add RoCE ll2 & GSI support
qed: Add support for memory registeration verbs
qed: Add support for QP verbs
qed: PD,PKEY and CQ verb support
qed: Add support for RoCE hw init
qede: Add qedr framework
...
Pull audit updates from Paul Moore:
"Another relatively small pull request for v4.9 with just two patches.
The patch from Richard updates the list of features we support and
report back to userspace; this should have been sent earlier with the
rest of the v4.8 patches but it got lost in my inbox.
The second patch fixes a problem reported by our Android friends where
we weren't very consistent in recording PIDs"
* 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit:
audit: add exclude filter extension to feature bitmap
audit: consistently record PIDs with task_tgid_nr()
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
Pull irq updates from Thomas Gleixner:
"The irq departement proudly presents:
- A rework of the core infrastructure to optimally spread interrupt
for multiqueue devices. The first version was a bit naive and
failed to take thread siblings and other details into account.
Developed in cooperation with Christoph and Keith.
- Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
active then no further softirq processsing on interrupt return
happens. Otherwise we try to delegate and still run another batch
of network packets in the irq return path, which then tries to
delegate to ksoftirqd .....
- A proper machine parseable sysfs based alternative for
/proc/interrupts.
- ACPI support for the GICV3-ITS and ARM interrupt remapping
- Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC
- A new irq chip for the JCore (SuperH)
- The usual pile of small fixlets in core and irqchip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
softirq: Let ksoftirqd do its job
genirq: Make function __irq_do_set_handler() static
ARM/dts: Add EXTI controller node to stm32f429
ARM/STM32: Select external interrupts controller
drivers/irqchip: Add STM32 external interrupts support
Documentation/dt-bindings: Document STM32 EXTI controller bindings
irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
pci/msi: Retrieve affinity for a vector
genirq/affinity: Remove old irq spread infrastructure
genirq/msi: Switch to new irq spreading infrastructure
genirq/affinity: Provide smarter irq spreading infrastructure
genirq/msi: Add cpumask allocation to alloc_msi_entry
genirq: Expose interrupt information through sysfs
irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
irqchip/gicv3-its: Probe ITS in the ACPI way
irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
irqchip/gicv3-its: Cleanup for ITS domain initialization
PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
ACPI: Add new IORT functions to support MSI domain handling
...
Pull timer updates from Thomas Gleixner:
"A rather smalish set of updates for timers and timekeeping:
- Two core fixes to prevent potential undefinded behaviour about
which gcc is complaining rightfully.
- A fix to prevent stopping the tick on an (soon) offline CPU so it
can complete the shutdown procedure.
- Wait for clocks to stabilize before making decisions, so a not yet
validated clock is not rejected.
- The usual pile of fixes to the various clocksource drivers.
- Core code typo and include fixlets"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Include the correct header for errno definitions
clocksource/drivers/ti-32k: Prevent ftrace recursion
clocksource/mips-gic-timer: Stop checking cpu_has_counter
clocksource/mips-gic-timer: Print an error if IRQ setup fails
tick/nohz: Prevent stopping the tick on an offline CPU
clocksource/drivers/oxnas: Add OX820 compatible
clocksource/drivers/timer-atmel-pit: Simplify IRQ handler
clocksource/drivers/timer-atmel-pit: Remove uselesss WARN_ON_ONCE
clocksource/drivers/timer-atmel-pit: Drop at91sam926x_pit_common_init
clocksource/drivers/moxart: Replace panic by pr_err
clocksource/drivers/moxart: Replace setup_irq by request_irq
clocksource/drivers/moxart: Add Aspeed support
clocksource/drivers/moxart: Use struct to hold state
clocksource/drivers/moxart: Refactor enable/disable
time: Avoid undefined behaviour in ktime_add_safe()
time: Avoid undefined behaviour in timespec64_add_safe()
timekeeping: Prints the amounts of time spent during suspend
clocksource: Defer override invalidation unless clock is unstable
hrtimer: Spelling fixes
Pull x86 vdso updates from Ingo Molnar:
"The main changes in this cycle centered around adding support for
32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry
Safonov"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl
x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64
x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE
x86/signal: Add SA_{X32,IA32}_ABI sa_flags
x86/ptrace: Down with test_thread_flag(TIF_IA32)
x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
x86/vdso: Replace calculate_addr in map_vdso() with addr
x86/vdso: Unmap vdso blob on vvar mapping failure
Pull low-level x86 updates from Ingo Molnar:
"In this cycle this topic tree has become one of those 'super topics'
that accumulated a lot of changes:
- Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
x86 - preceded by an array of changes. v4.8 saw preparatory changes
in this area already - this is the rest of the work. Includes the
thread stack caching performance optimization. (Andy Lutomirski)
- switch_to() cleanups and all around enhancements. (Brian Gerst)
- A large number of dumpstack infrastructure enhancements and an
unwinder abstraction. The secret long term plan is safe(r) live
patching plus maybe another attempt at debuginfo based unwinding -
but all these current bits are standalone enhancements in a frame
pointer based debug environment as well. (Josh Poimboeuf)
- More __ro_after_init and const annotations. (Kees Cook)
- Enable KASLR for the vmemmap memory region. (Thomas Garnier)"
[ The virtually mapped stack changes are pretty fundamental, and not
x86-specific per se, even if they are only used on x86 right now. ]
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/asm: Get rid of __read_cr4_safe()
thread_info: Use unsigned long for flags
x86/alternatives: Add stack frame dependency to alternative_call_2()
x86/dumpstack: Fix show_stack() task pointer regression
x86/dumpstack: Remove dump_trace() and related callbacks
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
oprofile/x86: Convert x86_backtrace() to use the new unwinder
x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
perf/x86: Convert perf_callchain_kernel() to use the new unwinder
x86/unwind: Add new unwind interface and implementations
x86/dumpstack: Remove NULL task pointer convention
fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
lib/syscall: Pin the task stack in collect_syscall()
x86/process: Pin the target stack in get_wchan()
x86/dumpstack: Pin the target stack when dumping it
kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
sched/core: Add try_get_task_stack() and put_task_stack()
x86/entry/64: Fix a minor comment rebase error
iommu/amd: Don't put completion-wait semaphore on stack
...
Pull perf updates from Ingo Molnar:
"The main kernel side changes were:
- uprobes enhancements (Masami Hiramatsu)
- Uncore group events enhancements (David Carrillo-Cisneros)
- x86 Intel: Add support for Skylake server uncore PMUs (Kan Liang)
- x86 Intel: LBR cleanups and enhancements, for better branch
annotation tracking (Peter Zijlstra)
- x86 Intel: Add support for PTWRITE and power event tracing
(Alexander Shishkin)
- ... various fixes, cleanups and smaller enhancements.
Lots of tooling changes - a couple of highlights:
- Support event group view with hierarchy mode in 'perf top' and
'perf report' (Namhyung Kim)
e.g.:
$ perf record -e '{cycles,instructions}' make
$ perf report --hierarchy --stdio
...
# Overhead Command / Shared Object / Symbol
# ...................... ..................................
...
25.74% 27.18%sh
19.96% 24.14%libc-2.24.so
9.55% 14.64%[.] __strcmp_sse2
1.54% 0.00%[.] __tfind
1.07% 1.13%[.] _int_malloc
0.95% 0.00%[.] __strchr_sse2
0.89% 1.39%[.] __tsearch
0.76% 0.00%[.] strlen
- Add branch stack / basic block info to 'perf annotate --stdio',
where for each branch, we add an asm comment after the instruction
with information on how often it was taken and predicted. See
example with color output at:
http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png
(Peter Zijlstra)
- Add support for using symbols in address filters with Intel PT and
ARM CoreSight (hardware assisted tracing facilities) (Adrian
Hunter, Mathieu Poirier)
- Add support for interacting with Coresight PMU ETMs/PTMs, that are
IP blocks to perform hardware assisted tracing on a ARM CPU core
(Mathieu Poirier)
- Support generating cross arch probes, i.e. if you specify a vmlinux
file for different arch than the one in the host machine,
$ perf probe --definition function_name args
will generate the probe definition string needed to append to the
target machine /sys/kernel/debug/tracing/kprobes_events file, using
scripting (Masami Hiramatsu).
- Allow configuring the default 'perf report -s' sort order in
~/.perfconfig, for instance, "sym,dso" may be more fitting for
kernel developers. (Arnaldo Carvalho de Melo)
- ... plus lots of other changes, refactorings, features and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (149 commits)
perf tests: Add dwarf unwind test for powerpc
perf probe: Match linkage name with mangled name
perf probe: Fix to cut off incompatible chars from group name
perf probe: Skip if the function address is 0
perf probe: Ignore the error of finding inline instance
perf intel-pt: Fix decoding when there are address filters
perf intel-pt: Enable decoder to handle TIP.PGD with missing IP
perf intel-pt: Read address filter from AUXTRACE_INFO event
perf intel-pt: Record address filter in AUXTRACE_INFO event
perf intel-pt: Add a helper function for processing AUXTRACE_INFO
perf intel-pt: Fix missing error codes processing auxtrace_info
perf intel-pt: Add support for recording the max non-turbo ratio
perf intel-pt: Fix snapshot overlap detection decoder errors
perf probe: Increase debug level of SDT debug messages
perf record: Add support for using symbols in address filters
perf symbols: Add dso__last_symbol()
perf record: Fix error paths
perf record: Rename label 'out_symbol_exit'
perf script: Fix vanished idle symbols
perf evsel: Add support for address filters
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- rwsem micro-optimizations (Davidlohr Bueso)
- Improve the implementation and optimize the performance of
percpu-rwsems. (Peter Zijlstra.)
- Convert all lglock users to better facilities such as percpu-rwsems
or percpu-spinlocks and remove lglocks. (Peter Zijlstra)
- Remove the ticket (spin)lock implementation. (Peter Zijlstra)
- Korean translation of memory-barriers.txt and related fixes to the
English document. (SeongJae Park)
- misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/cmpxchg, locking/atomics: Remove superfluous definitions
x86, locking/spinlocks: Remove ticket (spin)lock implementation
locking/lglock: Remove lglock implementation
stop_machine: Remove stop_cpus_lock and lg_double_lock/unlock()
fs/locks: Use percpu_down_read_preempt_disable()
locking/percpu-rwsem: Add down_read_preempt_disable()
fs/locks: Replace lg_local with a per-cpu spinlock
fs/locks: Replace lg_global with a percpu-rwsem
locking/percpu-rwsem: Add DEFINE_STATIC_PERCPU_RWSEMand percpu_rwsem_assert_held()
locking/pv-qspinlock: Use cmpxchg_release() in __pv_queued_spin_unlock()
locking/rwsem, x86: Drop a bogus cc clobber
futex: Add some more function commentry
locking/hung_task: Show all locks
locking/rwsem: Scan the wait_list for readers only once
locking/rwsem: Remove a few useless comments
locking/rwsem: Return void in __rwsem_mark_wake()
locking, rcu, cgroup: Avoid synchronize_sched() in __cgroup_procs_write()
locking/Documentation: Add Korean translation
locking/Documentation: Fix a typo of example result
locking/Documentation: Fix wrong section reference
...
Pull core SMP updates from Ingo Molnar:
"Two main change is generic vCPU pinning and physical CPU SMP-call
support, for Xen to be able to perform certain calls on specific
physical CPUs - by Juergen Gross"
* 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Allocate smp_call_on_cpu() workqueue on stack too
hwmon: Use smp_call_on_cpu() for dell-smm i8k
dcdbas: Make use of smp_call_on_cpu()
xen: Add xen_pin_vcpu() to support calling functions on a dedicated pCPU
smp: Add function to execute a function synchronously on a CPU
virt, sched: Add generic vCPU pinning support
xen: Sync xen header
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Expedited grace-period changes, most notably avoiding having user
threads drive expedited grace periods, using a workqueue instead.
- Miscellaneous fixes, including a performance fix for lists that was
sent with the lists modifications.
- CPU hotplug updates, most notably providing exact CPU-online
tracking for RCU. This will in turn allow removal of the checks
supporting RCU's prior heuristic that was based on the assumption
that CPUs would take no longer than one jiffy to come online.
- Torture-test updates.
- Documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
list: Expand list_first_entry_or_null()
torture: TOROUT_STRING(): Insert a space between flag and message
rcuperf: Consistently insert space between flag and message
rcutorture: Print out barrier error as document says
torture: Add task state to writer-task stall printk()s
torture: Convert torture_shutdown() to hrtimer
rcutorture: Convert to hotplug state machine
cpu/hotplug: Get rid of CPU_STARTING reference
rcu: Provide exact CPU-online tracking for RCU
rcu: Avoid redundant quiescent-state chasing
rcu: Don't use modular infrastructure in non-modular code
sched: Make wake_up_nohz_cpu() handle CPUs going offline
rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads
rcu: Use RCU's online-CPU state for expedited IPI retry
rcu: Exclude RCU-offline CPUs from expedited grace periods
rcu: Make expedited RCU CPU stall warnings respond to controls
rcu: Stop disabling expedited RCU CPU stall warnings
rcu: Drive expedited grace periods from workqueue
rcu: Consolidate expedited grace period machinery
documentation: Record reason for rcu_head two-byte alignment
...
- Add a mechanism for passing hints from the scheduler to cpufreq governors
via their utilization update callbacks and use it to introduce "IOwait
boosting" into the schedutil governor and intel_pstate that will make them
boost performance if the enqueued task was previously waiting on I/O
(Rafael Wysocki).
- Fix a schedutil governor problem that causes it to overestimate utilization
if SMT is in use (Steve Muckle).
- Update defconfigs trying to use the schedutil governor as a module which is
not possible any more (Javier Martinez Canillas).
- Update the intel_pstate's pstate_sample tracepoint to take "IOwait boosting"
into account (Srinivas Pandruvada).
- Fix a problem in the cpufreq core causing it to mishandle the initialization
of CPUs registered after the cpufreq driver (Viresh Kumar, Rafael Wysocki).
- Make the cpufreq-dt driver support per-policy governor tunables, clean it
up and update its Kconfig description (Viresh Kumar).
- Add support for more ARM platforms to the cpufreq-dt driver (Chanwoo Choi,
Dave Gerlach, Geert Uytterhoeven).
- Make the cpufreq CPPC driver report frequencies in KHz to avoid user space
compatiblility issues (Al Stone, Hoan Tran).
- Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin Ian King,
Markus Elfring).
- Constify some local structures in the intel_pstate driver (Julia Lawall).
- Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).
- Add support for PM domain removal to the generic power domains (genpd)
framework, add new DT helper functions to it and make it always enable
debugfs support if available (Jon Hunter, Tomeu Vizoso).
- Clean up the generic power domains (genpd) framework and make it avoid
measuring power-on and power-off latencies during system-wide PM transitions
(Ulf Hansson).
- Add support for the RockChip DFI controller and the rk3399 DMC to the
devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).
- Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski, Stephen
Rothwell).
- Fix a minor issue in the exynos-ppmu devfreq driver and fix up devfreq
Kconfig indentation style (Wei Yongjun, Jisheng Zhang).
- Fix the system suspend interface to make suspend-to-idle work if platform
suspend operations have not been registered (Sudeep Holla).
- Make it possible to use hibernation with PAGE_POISONING_ZERO enabled
(Anisse Astier).
- Increas the default timeout of the system suspend/resume watchdog and make it
depend on EXPERT (Chen Yu).
- Make the operating performance points (OPP) framework avoid using OPPs that
aren't supported by the platform and fix a build warning in it (Dave Gerlach,
Arnd Bergmann).
- Fix the ARM cpuidle driver's return value (Christophe Jaillet).
- Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more common
logging style (Joe Perches).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NYkv
-----END PGP SIGNATURE-----
Merge tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Traditionally, cpufreq is the area with the greatest number of
changes, but there are fewer of them than last time. There also is
some activity in the generic power domains and the devfreq frameworks,
a couple of system suspend and hibernation fixes and some assorted
changes in other places.
One new feature is the cpufreq change to allow the scheduler to pass
hints to the governors' utilization update callbacks and some code
rework based on that. Another one is the support for domain removal in
the generic power domains framework. Also it is now possible to use
hibernation with PAGE_POISONING_ZERO enabled and devfreq supports the
RockChip DFI controller and the rk3399 DMC.
The rest of the changes is mostly fixes and cleanups in a number of
places.
Specifics:
- Add a mechanism for passing hints from the scheduler to cpufreq
governors via their utilization update callbacks and use it to
introduce "IOwait boosting" into the schedutil governor and
intel_pstate that will make them boost performance if the enqueued
task was previously waiting on I/O (Rafael Wysocki).
- Fix a schedutil governor problem that causes it to overestimate
utilization if SMT is in use (Steve Muckle).
- Update defconfigs trying to use the schedutil governor as a module
which is not possible any more (Javier Martinez Canillas).
- Update the intel_pstate's pstate_sample tracepoint to take "IOwait
boosting" into account (Srinivas Pandruvada).
- Fix a problem in the cpufreq core causing it to mishandle the
initialization of CPUs registered after the cpufreq driver (Viresh
Kumar, Rafael Wysocki).
- Make the cpufreq-dt driver support per-policy governor tunables,
clean it up and update its Kconfig description (Viresh Kumar).
- Add support for more ARM platforms to the cpufreq-dt driver
(Chanwoo Choi, Dave Gerlach, Geert Uytterhoeven).
- Make the cpufreq CPPC driver report frequencies in KHz to avoid
user space compatiblility issues (Al Stone, Hoan Tran).
- Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin
Ian King, Markus Elfring).
- Constify some local structures in the intel_pstate driver (Julia
Lawall).
- Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).
- Add support for PM domain removal to the generic power domains
(genpd) framework, add new DT helper functions to it and make it
always enable debugfs support if available (Jon Hunter, Tomeu
Vizoso).
- Clean up the generic power domains (genpd) framework and make it
avoid measuring power-on and power-off latencies during system-wide
PM transitions (Ulf Hansson).
- Add support for the RockChip DFI controller and the rk3399 DMC to
the devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).
- Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski,
Stephen Rothwell).
- Fix a minor issue in the exynos-ppmu devfreq driver and fix up
devfreq Kconfig indentation style (Wei Yongjun, Jisheng Zhang).
- Fix the system suspend interface to make suspend-to-idle work if
platform suspend operations have not been registered (Sudeep
Holla).
- Make it possible to use hibernation with PAGE_POISONING_ZERO
enabled (Anisse Astier).
- Increas the default timeout of the system suspend/resume watchdog
and make it depend on EXPERT (Chen Yu).
- Make the operating performance points (OPP) framework avoid using
OPPs that aren't supported by the platform and fix a build warning
in it (Dave Gerlach, Arnd Bergmann).
- Fix the ARM cpuidle driver's return value (Christophe Jaillet).
- Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more
common logging style (Joe Perches)"
* tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
PM / OPP: Don't support OPP if it provides supported-hw but platform does not
cpufreq: st: add missing \n to end of dev_err message
cpufreq: kirkwood: add missing \n to end of dev_err messages
PM / Domains: Rename pm_genpd_sync_poweron|poweroff()
PM / Domains: Don't measure latency of ->power_on|off() during system PM
PM / Domains: Remove redundant system PM callbacks
PM / Domains: Simplify detaching a device from its genpd
PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
PM / OPP: avoid maybe-uninitialized warning
PM / Domains: Allow holes in genpd_data.domains array
cpufreq: CPPC: Avoid overflow when calculating desired_perf
cpufreq: ti: Use generic platdev driver
cpufreq: intel_pstate: Add io_boost trace
partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
cpufreq: schedutil: Add iowait boosting
cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
PM / Domains: Add support for removing nested PM domains by provider
PM / Domains: Add support for removing PM domains
...
- Support for execute-only page permissions
- Support for hibernate and DEBUG_PAGEALLOC
- Support for heterogeneous systems with mismatches cache line sizes
- Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
- arm64 PMU perf updates, including cpumasks for heterogeneous systems
- Set UTS_MACHINE for building rpm packages
- Yet another head.S tidy-up
- Some cleanups and refactoring, particularly in the NUMA code
- Lots of random, non-critical fixes across the board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJX7k31AAoJELescNyEwWM0XX0H/iOaWCfKlWOhvBsStGUCsLrK
XryTzQT2KjdnLKf3jwP+1ateCuBR5ROurYxoDCX5/7mD63c5KiI338Vbv61a1lE1
AAwjt1stmQVUg/j+kqnuQwB/0DYg+2C8se3D3q5Iyn7zc19cDZJEGcBHNrvLMufc
XgHrgHgl/rzBDDlHJXleknDFge/MfhU5/Q1vJMRRb4JYrpAtmIokzCO75CYMRcCT
ND2QbmppKtsyuFPGUTVbAFzJlP6dGKb3eruYta7/ct5d0pJQxav3u98D2yWGfjdM
YaYq1EmX5Pol7rWumqLtk0+mA9yCFcKLLc+PrJu20Vx0UkvOq8G8Xt70sHNvZU8=
=gdPM
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It's a bit all over the place this time with no "killer feature" to
speak of. Support for mismatched cache line sizes should help people
seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
updates have been a long time coming, but a lot of the changes here
are cleanups.
We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
workaround is acked by Russell, the DT/OF bits are acked by Rob, the
arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
jump_label by Peter (all CC'd).
Summary:
- Support for execute-only page permissions
- Support for hibernate and DEBUG_PAGEALLOC
- Support for heterogeneous systems with mismatches cache line sizes
- Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
- arm64 PMU perf updates, including cpumasks for heterogeneous systems
- Set UTS_MACHINE for building rpm packages
- Yet another head.S tidy-up
- Some cleanups and refactoring, particularly in the NUMA code
- Lots of random, non-critical fixes across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
arm64: tlbflush.h: add __tlbi() macro
arm64: Kconfig: remove SMP dependence for NUMA
arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
arm64: fix dump_backtrace/unwind_frame with NULL tsk
arm/arm64: arch_timer: Use archdata to indicate vdso suitability
arm64: arch_timer: Work around QorIQ Erratum A-008585
arm64: arch_timer: Add device tree binding for A-008585 erratum
arm64: Correctly bounds check virt_addr_valid
arm64: migrate exception table users off module.h and onto extable.h
arm64: pmu: Hoist pmu platform device name
arm64: pmu: Probe default hw/cache counters
arm64: pmu: add fallback probe table
MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
arm64: Improve kprobes test for atomic sequence
arm64/kvm: use alternative auto-nop
arm64: use alternative auto-nop
arm64: alternative: add auto-nop infrastructure
arm64: lse: convert lse alternatives NOP padding to use __nops
arm64: barriers: introduce nops and __nops macros for NOP sequences
arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
...
* pm-cpufreq: (24 commits)
cpufreq: st: add missing \n to end of dev_err message
cpufreq: kirkwood: add missing \n to end of dev_err messages
cpufreq: CPPC: Avoid overflow when calculating desired_perf
cpufreq: ti: Use generic platdev driver
cpufreq: intel_pstate: Add io_boost trace
cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
cpufreq: schedutil: Add iowait boosting
cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
cpufreq: CPPC: Force reporting values in KHz to fix user space interface
cpufreq: create link to policy only for registered CPUs
intel_pstate: constify local structures
cpufreq: dt: Support governor tunables per policy
cpufreq: dt: Update kconfig description
cpufreq: dt: Remove unused code
MAINTAINERS: Add Documentation/cpu-freq/
cpufreq: dt: Add support for r8a7792
cpufreq / sched: ignore SMT when determining max cpu capacity
cpufreq: Drop unnecessary check from cpufreq_policy_alloc()
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
...
The code performing irqtime nsecs stats flushing to kcpustat is roughly
the same for hardirq and softirq. So lets consolidate that common code.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1474849761-12678-6-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The irqtime accounting currently implement its own ad hoc implementation
of u64_stats API. Lets rather consolidate it with the appropriate
library.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1474849761-12678-5-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The callers of the functions performing irqtime kcpustat updates have
IRQS disabled, no need to disable them again.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1474849761-12678-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We can safely use the preempt-unsafe accessors for irqtime when we
flush its counters to kcpustat as IRQs are disabled at this time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1474849761-12678-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While going through enqueue/dequeue to review the movement of
set_curr_task() I noticed that the (2nd) update_min_vruntime() call in
dequeue_entity() is suspect.
It turns out, its actually wrong because it will consider
cfs_rq->curr, which could be the entry we just normalized. This mixes
different vruntime forms and leads to fail.
The purpose of the second update_min_vruntime() is to move
min_vruntime forward if the entity we just removed is the one that was
holding it back; _except_ for the DEQUEUE_SAVE case, because then we
know its a temporary removal and it will come back.
However, since we do put_prev_task() _after_ dequeue(), cfs_rq->curr
will still be set (and per the above, can be tranformed into a
different unit), so update_min_vruntime() should also consider
curr->on_rq. This also fixes another corner case where the enqueue
(which also does update_curr()->update_min_vruntime()) happens on the
rq->lock break in schedule(), between dequeue and put_prev_task.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 1e87623178 ("sched: Fix ->min_vruntime calculation in dequeue_entity()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide SCHED_WARN_ON as wrapper for WARN_ON_ONCE() to avoid
CONFIG_SCHED_DEBUG wrappery.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Almost all scheduler functions update state with the following
pattern:
if (queued)
dequeue_task(rq, p, DEQUEUE_SAVE);
if (running)
put_prev_task(rq, p);
/* update state */
if (queued)
enqueue_task(rq, p, ENQUEUE_RESTORE);
if (running)
set_curr_task(rq, p);
set_user_nice() however misses the running part, cure this.
This was found by asserting we never enqueue 'current'.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the ia64 only set_curr_task() symbol is gone, provide a
helper just like put_prev_task().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename the ia64 only set_curr_task() function to free up the name.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a task switches to fair scheduling class, the period between now
and the last update of its utilization is accounted as running time
whatever happened during this period. This incorrect accounting applies
to the task and also to the task group branch.
When changing the property of a running task like its list of allowed
CPUs or its scheduling class, we follow the sequence:
- dequeue task
- put task
- change the property
- set task as current task
- enqueue task
The end of the sequence doesn't follow the normal sequence (as per
__schedule()) which is:
- enqueue a task
- then set the task as current task.
This incorrectordering is the root cause of incorrect utilization accounting.
Update the sequence to follow the right one:
- dequeue task
- put task
- change the property
- enqueue task
- set task as current task
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: linaro-kernel@lists.linaro.org
Cc: pjt@google.com
Cc: yuyang.du@intel.com
Link: http://lkml.kernel.org/r/1473666472-13749-8-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
select_idle_siblings() is a known pain point for a number of
workloads; it either does too much or not enough and sometimes just
does plain wrong.
This rewrite attempts to address a number of issues (but sadly not
all).
The current code does an unconditional sched_domain iteration; with
the intent of finding an idle core (on SMT hardware). The problems
which this patch tries to address are:
- its pointless to look for idle cores if the machine is real busy;
at which point you're just wasting cycles.
- it's behaviour is inconsistent between SMT and !SMT hardware in
that !SMT hardware ends up doing a scan for any idle CPU in the LLC
domain, while SMT hardware does a scan for idle cores and if that
fails, falls back to a scan for idle threads on the 'target' core.
The new code replaces the sched_domain scan with 3 explicit scans:
1) search for an idle core in the LLC
2) search for an idle CPU in the LLC
3) search for an idle thread in the 'target' core
where 1 and 3 are conditional on SMT support and 1 and 2 have runtime
heuristics to skip the step.
Step 1) is conditional on sd_llc_shared->has_idle_cores; when a cpu
goes idle and sd_llc_shared->has_idle_cores is false, we scan all SMT
siblings of the CPU going idle. Similarly, we clear
sd_llc_shared->has_idle_cores when we fail to find an idle core.
Step 2) tracks the average cost of the scan and compares this to the
average idle time guestimate for the CPU doing the wakeup. There is a
significant fudge factor involved to deal with the variability of the
averages. Esp. hackbench was sensitive to this.
Step 3) is unconditional; we assume (also per step 1) that scanning
all SMT siblings in a core is 'cheap'.
With this; SMT systems gain step 2, which cures a few benchmarks --
notably one from Facebook.
One 'feature' of the sched_domain iteration, which we preserve in the
new code, is that it would start scanning from the 'target' CPU,
instead of scanning the cpumask in cpu id order. This avoids multiple
CPUs in the LLC scanning for idle to gang up and find the same CPU
quite as much. The down side is that tasks can end up hopping across
the LLC for no apparent reason.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the nr_busy_cpus thing from its hacky sd->parent->groups->sgc
location into the much more natural sched_domain_shared location.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since struct sched_domain is strictly per cpu; introduce a structure
that is shared between all 'identical' sched_domains.
Limit to SD_SHARE_PKG_RESOURCES domains for now, as we'll only use it
for shared cache state; if another use comes up later we can easily
relax this.
While the sched_group's are normally shared between CPUs, these are
not natural to use when we need some shared state on a domain level --
since that would require the domain to have a parent, which is not a
given.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no point in doing a call_rcu() for each domain, only do a
callback for the root sched domain and clean up the entire set in one
go.
Also make the entire call chain be called destroy_sched_domain*() to
remove confusion with the free_sched_domains() call, which does an
entirely different thing.
Both cpu_attach_domain() callers of destroy_sched_domain() can live
without the call_rcu() because at those points the sched_domain hasn't
been published yet.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Small cleanup; nothing uses the @cpu argument so make it go away.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The partial initialization of wait_queue_t in prepare_to_wait_event() looks
ugly. This was done to shrink .text, but we can simply add the new helper
which does the full initialization and shrink the compiled code a bit more.
And. This way prepare_to_wait_event() can have more users. In particular we
are ready to remove the signal_pending_state() checks from wait_bit_action_f
helpers and change __wait_on_bit_lock() to use prepare_to_wait_event().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160906140055.GA6167@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__wait_on_bit_lock() doesn't need abort_exclusive_wait() too. Right
now it can't use prepare_to_wait_event() (see the next change), but
it can do the additional finish_wait() if action() fails.
abort_exclusive_wait() no longer has callers, remove it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160906140053.GA6164@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
___wait_event() doesn't really need abort_exclusive_wait(), we can simply
change prepare_to_wait_event() to remove the waiter from q->task_list if
it was interrupted.
This simplifies the code/logic, and this way prepare_to_wait_event() can
have more users, see the next change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160908164815.GA18801@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
--
include/linux/wait.h | 7 +------
kernel/sched/wait.c | 35 +++++++++++++++++++++++++----------
2 files changed, 26 insertions(+), 16 deletions(-)
Otherwise this logic only works if mode is "compatible" with another
exclusive waiter.
If some wq has both TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE waiters,
abort_exclusive_wait() won't wait an uninterruptible waiter.
The main user is __wait_on_bit_lock() and currently it is fine but only
because TASK_KILLABLE includes TASK_UNINTERRUPTIBLE and we do not have
lock_page_interruptible() yet.
Just use TASK_NORMAL and remove the "mode" arg from abort_exclusive_wait().
Yes, this means that (say) wake_up_interruptible() can wake up the non-
interruptible waiter(s), but I think this is fine. And in fact I think
that abort_exclusive_wait() must die, see the next change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160906140047.GA6157@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
2159197d66 ("sched/core: Enable increased load resolution on 64-bit kernels")
we now have two different fixed point units for load:
- 'shares' in calc_cfs_shares() has 20 bit fixed point unit on 64-bit
kernels. Therefore use scale_load() on MIN_SHARES.
- 'wl' in effective_load() has 10 bit fixed point unit. Therefore use
scale_load_down() on tg->shares which has 20 bit fixed point unit on
64-bit kernels.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1471874441-24701-1-git-send-email-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current code can call set_cpu_sibling_map() and invoke sched_set_topology()
more than once (e.g. on CPU hot plug). When this happens after
sched_init_smp() has been called, we lose the NUMA topology extension to
sched_domain_topology in sched_init_numa(). This results in incorrect
topology when the sched domain is rebuilt.
This patch fixes the bug and issues warning if we call sched_set_topology()
after sched_init_smp().
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: jolsa@redhat.com
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/1474485552-141429-2-git-send-email-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A while back, Paolo and Hannes sent an RFC patch adding threaded-able
napi poll loop support : (https://patchwork.ozlabs.org/patch/620657/)
The problem seems to be that softirqs are very aggressive and are often
handled by the current process, even if we are under stress and that
ksoftirqd was scheduled, so that innocent threads would have more chance
to make progress.
This patch makes sure that if ksoftirq is running, we let it
perform the softirq work.
Jonathan Corbet summarized the issue in https://lwn.net/Articles/687617/
Tested:
- NIC receiving traffic handled by CPU 0
- UDP receiver running on CPU 0, using a single UDP socket.
- Incoming flood of UDP packets targeting the UDP socket.
Before the patch, the UDP receiver could almost never get CPU cycles and
could only receive ~2,000 packets per second.
After the patch, CPU cycles are split 50/50 between user application and
ksoftirqd/0, and we can effectively read ~900,000 packets per second,
a huge improvement in DOS situation. (Note that more packets are now
dropped by the NIC itself, since the BH handlers get less CPU cycles to
drain RX ring buffer)
Since the load runs in well identified threads context, an admin can
more easily tune process scheduling parameters if needed.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1472665349.14381.356.camel@edumazet-glaptop3.roam.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Suppose you have a map array value that is something like this
struct foo {
unsigned iter;
int array[SOME_CONSTANT];
};
You can easily insert this into an array, but you cannot modify the contents of
foo->array[] after the fact. This is because we have no way to verify we won't
go off the end of the array at verification time. This patch provides a start
for this work. We accomplish this by keeping track of a minimum and maximum
value a register could be while we're checking the code. Then at the time we
try to do an access into a MAP_VALUE we verify that the maximum offset into that
region is a valid access into that memory region. So in practice, code such as
this
unsigned index = 0;
if (foo->iter >= SOME_CONSTANT)
foo->iter = index;
else
index = foo->iter++;
foo->array[index] = bar;
would be allowed, as we can verify that index will always be between 0 and
SOME_CONSTANT-1. If you wish to use signed values you'll have to have an extra
check to make sure the index isn't less than 0, or do something like index %=
SOME_CONSTANT.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.
This doesn't change the behavior.
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup fixes from Tejun Heo:
"Three late fixes for cgroup: Two cpuset ones, one trivial and the
other pretty obscure, and a cgroup core fix for a bug which impacts
cgroup v2 namespace users"
* 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix invalid controller enable rejections with cgroup namespace
cpuset: fix non static symbol warning
cpuset: handle race between CPU hotplug and cpuset_hotplug_work
This prevent future potential pointer leaks when an unprivileged eBPF
program will read a pointer value from its context. Even if
is_valid_access() returns a pointer type, the eBPF verifier replace it
with UNKNOWN_VALUE. The register value that contains a kernel address is
then allowed to leak. Moreover, this fix allows unprivileged eBPF
programs to use functions with (legitimate) pointer arguments.
Not an issue currently since reg_type is only set for PTR_TO_PACKET or
PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as
privileged. For now, the only unprivileged eBPF program allowed is for
socket filtering and all the types from its context are UNKNOWN_VALUE.
However, this fix is important for future unprivileged eBPF programs
which could use pointers in their context.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
some issues. This contains one fix by me and one by Al. I'm sure that
he'll come up with more but for now I tested these patches and they
don't appear to have any negative impact on tracing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX6FvrAAoJEKKk/i67LK/8EuIH/Arf6vJidYsmbe57WQp8PU3I
bldem6ePj6zgZ2ZqPlSGCs1J2DcK4Bh3lPVxdx7rRKVWSd/Zoj+i83hvObusR8M7
Qs1G92bJTvvVO3aPfiN0GvKGdKfGn45L+j0BcBauiTRKqnj3PkhOhIP2/ks0ewSk
qeq7R3xxo/FDs26AHS69Hm0PIIw7btyhXNX4GB3Il7IIA5/nUknw3C+bjVj86tYX
R4iElcHEhplgoSjKuLgNIRZGUnEFtsm/fnohYXpHacLTUKNXnTDY230x/OKc1yyB
1vOfHS/y5s3XSJ1lcgSjYeNc51lK8NiDASaptZSUnOookKSAooUTFELNzpbc0sg=
=+Fr3
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Al Viro has been looking at the tracefs code, and has pointed out some
issues. This contains one fix by me and one by Al. I'm sure that
he'll come up with more but for now I tested these patches and they
don't appear to have any negative impact on tracing"
* tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
Fixes the following sparse warning:
kernel/irq/chip.c:786:1: warning:
symbol '__irq_do_set_handler' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds
David S. Miller
Rafael J. Wysocki
Thomas Gleixner
Frederic Weisbecker
Peter Zijlstra
Vincent Guittot
Ingo Molnar
Oleg Nesterov
Dietmar Eggemann
Tim Chen
Eric Dumazet
Josef Bacik
Shaohua Li
Mickaël Salaün
Wei Yongjun
