Commit Graph

616 Commits

Author SHA1 Message Date
Mike Christie 8e12452549 [SCSI] libiscsi: rename host reset to target reset
I had this in my patchset to add target reset support, but
it got dropped due to patching conflicts. This initial patch
just renames the function and users. We are actually just
dropping the session, and so this does not have anything to do
with the host exactly. It does for software iscsi because
we allocate a host per session, but for cxgb3i this makes no
sense.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Mike Christie 21536062d9 [SCSI] iscsi class: fix endpoint id handling
Some endpoint code was using unsigned int and some
was using uint64_t. This converts it all to uint64_t.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Mike Christie e5bd7b54e9 [SCSI] libiscsi: Support drivers initiating session removal
If the driver knows when hardware is removed like with cxgb3i,
bnx2i, qla4xxx and iser then we will want to remove the sessions/devices
that are bound to that device before removing the host.

cxgb3i and in the future bnx2i will remove the host and that will
remove all the sessions on the hba. iser can call iscsi_kill_session
when it gets an event that indicates that a hca is removed.
And when qla4xxx is hooked in to the lib (it is only hooked into
the class right now) it can call iscsi remove host like the
partial offload card drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Mike Christie f46e307da9 [SCSI] fc class: Add support for new transport errors
If the target is blocked and fast io fail tmo has not fired
then we requeue with DID_TRANSPORT_DISRUPTED. Once that
tmo fires we fail with DID_TRANSPORT_FAILFAST.

v2
- seperate from
"fc class: unblock target after calling terminate callback"
to make it easier to review.
- Add JamesS's ack from list.
v2
- initial patch

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:49 -04:00
Mike Christie a4dfaa6f2e [SCSI] scsi: add transport host byte errors (v3)
Currently, if there is a transport problem the iscsi drivers will return
outstanding commands (commands being exeucted by the driver/fw/hw) with
DID_BUS_BUSY and block the session so no new commands can be queued.
Commands that are caught between the failure handling and blocking are
failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values.
When the recovery_timeout fires, the iscsi drivers then fail IO with
DID_NO_CONNECT.

For fcp, some drivers will fail some outstanding IO (disk but possibly not
tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry
and hits the scsi_error.c failfast check, block the rport, and commands
caught in the race are failed with DID_IMM_RETRY. Other drivers, may
hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk
to be called.

The following patches attempt to unify what upper layers will see drivers
like multipath can make a good guess. This relies on drivers being
hooked into their transport class.

This first patch just defines two new host byte errors so drivers can
return the same value for when a rport/session is blocked and for
when the fast_io_fail_tmo fires.

The idea is that if the LLD/class detects a problem and is going to block
a rport/session, then if the LLD wants or must return the command to scsi-ml,
then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue
the IO into the same scsi queue it came from, until the fast io fail timer
fires and the class decides what to do.

When using multipath and the fast_io_fail_tmo fires then the class
can fail commands with DID_TRANSPORT_FAILFAST or drivers can use
DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or
the equivlent in iscsi if we ever implement more advanced recovery methods.
A LLD, like lpfc, could continue to return DID_ERROR and then it will hit
the normal failfast path, so drivers do not have fully be ported to
work better. The point of the patches is that upper layers will
not see a failure that could be recovered from while the rport/session is
blocked until fast_io_fail_tmo/recovery_timeout fires.

V3
Remove some comments.
V2
Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to
DID_TRANSPORT_DISRUPTED.
V1
initial patch.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:48 -04:00
Mike Christie fff9d40ce0 [SCSI] fc class: unblock target after calling terminate callback (take 2)
When we block a rport and the driver implements the terminate
callback we will fail IO that was running quickly. However
IO that was in the scsi_device/block queue sits there until
the dev_loss_tmo fires, and this can make it look like IO is
lost because new IO will get executed but that IO stuck in
the blocked queue sits there for some time longer.

With this patch when the fast io fail tmo fires, we will
fail the blocked IO and any new IO. This patch also allows
all drivers to partially support the fast io fail tmo. If the
terminate io callback is not implemented, we will still fail blocked
IO and any new IO, so multipath can handle that.

This patch also allows the fc and iscsi classes to implement the
same behavior. The timers are just unfornately named differently.

This patch also fixes the problem where drivers were unblocking
the target in their terminate callback, which was needed for
rport removal, but for fast io fail timeout it would cause
IO to bounce arround the scsi/block layer and the LLD queuecommand.
And it for drivers that could have IO stuck but did not have
a terminate callback the unblock calls in the class will fix
them.

v2.
- fix up bit setting style to meet JamesS's pref.
- Broke out new host byte error changes to make it easier to read.
- added JamesS's ack from list.
v1
- initial patch

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:47 -04:00
Mike Christie f0c0a376d0 [SCSI] Add helper code so transport classes/driver can control queueing (v3)
SCSI-ml manages the queueing limits for the device and host, but
does not do so at the target level. However something something similar
can come in userful when a driver is transitioning a transport object to
the the blocked state, becuase at that time we do not want to queue
io and we do not want the queuecommand to be called again.

The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers.
You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit
a transport level queueing issue like the hw cannot allocate some
resource at the iscsi session/connection level, or the target has temporarily
closed or shrunk the queueing window, or if we are transitioning
to the blocked state.

bnx2i, when they rework their firmware according to netdev
developers requests, will also need to be able to limit queueing at this
level. bnx2i will hook into libiscsi, but will allocate a scsi host per
netdevice/hba, so unlike pure software iscsi/iser which is allocating
a host per session, it cannot set the scsi_host->can_queue and return
SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport.

The iscsi class/driver can also set a scsi_target->can_queue value which
reflects the max commands the driver/class can support. For iscsi this
reflects the number of commands we can support for each session due to
session/connection hw limits, driver limits, and to also reflect the
session/targets's queueing window.

Changes:
v1 - initial patch.
v2 - Fix scsi_run_queue handling of multiple blocked targets.
Previously we would break from the main loop if a device was added back on
the starved list. We now run over the list and check if any target is
blocked.
v3 - Rediff for scsi-misc.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:46 -04:00
Linus Torvalds ef5bef357c Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...
2008-10-10 10:53:26 -07:00
Jens Axboe 242f9dcb8b block: unify request timeout handling
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.

Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:13 +02:00
Andrew Vasquez a30c3f69e6 [SCSI] fc_transport: Add an API to allow an LLD to create vports
There's already a fc_vport_termintate() call exported by
the transport.  This patch adds a symmetric call to the API to allow
an NPIV-capable LLD to instantiate vports sans user intervention.

Additional comments/updates:

   Re: scsi_fc_transport.txt
     Add a function prototype for fc_vport_terminate similar to what's
     done for fc_vport_create

   Re: fc_vport_create
     I recommend we pass the channel number in fc_vport_create rather
     than fixing it at zero.

     Also, ids->vport_type should be set to FC_PORTTYPE_NPIV prior to
     calling fc_vport_create. The comment is also meaningless.

Added-by and
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:15 -05:00
James Bottomley 6f4267e3bd [SCSI] Update the SCSI state model to allow blocking in the created state
Brian King <brking@linux.vnet.ibm.com> reported that fibre channel
devices can oops during scanning if their ports block (because the
device goes from CREATED -> BLOCK -> RUNNING rather than CREATED ->
BLOCK -> CREATED).

Fix this by adding a new state: CREATED_BLOCK which can only transition
back to CREATED and disallow the CREATED -> BLOCK transition.  Now both
the created and blocked states that the mid-layer recognises can include
CREATED_BLOCK.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:13 -05:00
James Bottomley 0f1d87a2ac [SCSI] add inline functions for recognising created and blocked states
The created and blocked states are very shortly going to correspond to
mixed sdev_state states.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:13 -05:00
James Smart 22447be7d1 [SCSI] scsi_netlink: Add transport and LLD recieve and event support
This patch adds scsi netlink recieve and event support for transport
and scsi LLDD's.  It is a reimplementation of the patch posted last
week by David Somayajulu.
http://marc.info/?l=linux-scsi&m=121745486221819&w=2

There are a few things done differently:

- Transport support is included

- Event delivery is included

- The vendor message is now its own unique message type, considered
  part of the generic "SCSI Transport".

- LLDD entry points are now registered rather than included in the
  scsi_host_template.

  Background: When I started to implement the event handler via template,
  I had to either: muck up scsi_add_host and scsi_remove_host;  or have
  the event handler search all possible shosts. Neither was acceptable.
  Moving to a registration solves this, and also limits the scope of
  the changes to something that could be backported to a distro without
  breaking an already-released-distro kabi. However, I admit it isn't
  as elegant, as the passing of the LLDD host template in the
  registration and the complexity around dynamic add/remove shows.

- The receive path was augmented to require a unique identifier for
  the LLDD before the message was allowed to be handed off to the
  driver. Given how quickly very fatal errors occur if there's msg
  mismatches (which I saw in testing my own tools :), I believe this
  to be a very good thing. The id plays off the vendor id scheme already
  introduced for the vendor unique event messages used by FC.
  Additionally, the id use as the basis of the registration/deregistration.

- Send assist functions, for both the transport and LLDDs are included.

[fujita.tomonori@lab.ntt.co.jp: fix missing cast]
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:13 -05:00
James Bottomley 01b291bd66 [SCSI] fix check of PQ and PDT bits for WLUNs
For IBM z series certain LUNs can no longer be accessed.

This is because kernel version 2.6.19 a check was introduced not to
create a generic SCSI device for devices that return PQ=1 and
PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should
be created unconditionally without looking at the PQ bit, so add a
check for WLUNs in with this test.

Acked-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-29 09:19:11 -05:00
Hugh Dickins d211f052fa [SCSI] sd: fix USB devices incorrectly reporting DIF support
Some USB devices set the protect bit in the INQUIRY data which
currently causes the DIF code in sd to assume (incorrectly) that they
support READ_CAPACITY(16).  Fix this (only for the time being) by
making sure we only believe the protect bit in the inquiry data if the
device claims conformance to SCSI-3 or above.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-06 10:49:23 -07:00
Linus Torvalds 18351070b8 Re-introduce "[SCSI] extend the last_sector_bug flag to cover more sectors"
This re-introduces commit 2b14290078,
which was reverted due to the regression it caused by commit
fca082c9f1.

That regression was not root-caused by the original commit, it was just
uncovered by it, and the real fix was done by Alan Stern in commit
580da34847 ("Fix USB storage hang on
command abort").

We can thus re-introduce the change that was confirmed by Alan Jenkins
to be still required by his odd card reader.

Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05 21:42:21 -07:00
Linus Torvalds fca082c9f1 Revert "[SCSI] extend the last_sector_bug flag to cover more sectors"
This reverts commit 2b14290078, since it
seems to break some other USB storage devices (at least a JMicron USB to
ATA bridge).  As such, while it apparently fixes some cardreaders, it
would need to be made conditional on the exact reader it fixes in order
to avoid causing regressions.

Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04 16:36:20 -07:00
Alan Jenkins 2b14290078 [SCSI] extend the last_sector_bug flag to cover more sectors
The last_sector_bug flag was added to work around a bug in certain usb
cardreaders, where they would crash if a multiple sector read included the
last sector. The original implementation avoids this by e.g. splitting an 8
sector read which includes the last sector into a 7 sector read, and a single
sector read for the last sector.  The flag is enabled for all USB devices.

This revealed a second bug in other usb cardreaders, which crash when they
get a multiple sector read which stops 1 sector short of the last sector.
Affected hardware includes the Kingston "MobileLite" external USB cardreader
and the internal USB cardreader on the Asus EeePC.

Extend the last_sector_bug workaround to ensure that any access which touches
the last 8 hardware sectors of the device is a single sector long.  Requests
are shrunk as necessary to meet this constraint.

This gives us a safety margin against potential unknown or future bugs
affecting multi-sector access to the end of the device.  The two known bugs
only affect the last 2 sectors.  However, they suggest that these devices
are prone to fencepost errors and that multi-sector access to the end of the
device is not well tested.  Popular OS's use multi-sector accesses, but they
rarely read the last few sectors.  Linux (with udev & vol_id) automatically
reads sectors from the end of the device on insertion.  It is assumed that
single sector accesses are more thoroughly tested during development.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-27 10:16:13 -04:00
Alan Stern 12265709ac [SCSI] scsi_eh_prep_cmnd should save scmd->underflow
This patch (as1116) fixes a bug in scsi_eh_prep_cmnd() and
scsi_eh_restore_cmnd().  These routines are supposed to save any
values they change and restore them later, but someone forgot to
save & restore scmd->underflow.

This fixes part of the problem reported in Bugzilla #9638.

[jejb: fix up rejections around DIF/DIX]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:56 -04:00
Martin K. Petersen 7027ad72a6 [SCSI] Support devices with protection information
Implement support for DMA of protection information for devices that
are data integrity capable.

 - Add support for mapping an extra scatter-gather list containing
   the protection information.

 - Allocate protection scsi_data_buffer if host is DIX (integrity DMA)
   capable.

 - Accessor function for checking whether a device has protection
   enabled.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:55 -04:00
Martin K. Petersen db007fc5e2 [SCSI] Command protection operation
Controllers that support DMA of protection information must be told
explicitly how to handle the I/O.  The controller has no knowledge of
the protection capabilities of the target device so this information
must be passed in the scsi_cmnd.

 - The protection operation tells the HBA whether to generate, strip or
   verify protection information.

 - The protection type tells the HBA which layout the target is
   formatted with.  This is necessary because the controller must be
   able to correctly interpret the included protection information in
   order to verify it.

 - When a scsi_cmnd is reused for error handling the protection
   operation must be cleared and saved while error handling is in
   progress.

 - prot_op and prot_type are placed in an existing hole in scsi_cmnd
   and don't cause the structure to grow.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:54 -04:00
Martin K. Petersen 4469f98780 [SCSI] Host protection capabilities
Controllers that support protection information must indicate this to
the SCSI midlayer so that the ULD can prepare scsi_cmnds accordingly.

This patch implements a host mask and various types of protection:

 - DIF Type 1-3 (between HBA and disk)
 - DIX Type 0-3 (between OS and HBA)

The patch also allows the HBA to set the guard type to something
different than the T10-mandated CRC.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:54 -04:00
Hannes Reinecke ae11b1b36d [SCSI] scsi_dh: attach to hardware handler from dm-mpath
multipath keeps a separate device table which may be
more current than the built-in one.
So we should make sure to always call ->attach whenever
a multipath map with hardware handler is instantiated.
And we should call ->detach on removal, too.

[sekharan: update as per comments from agk]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:53 -04:00
Hannes Reinecke 057ea7c968 [SCSI] scsi_dh: add generic SPC-3 alua handler
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:52 -04:00
Hannes Reinecke b6ff1b14cd [SCSI] scsi_dh: Update EMC handler
This patch converts the EMC device handler to use a proper
state machine. We now also parse the extended INQUIRY
information to determine if long trespass commands are
supported. And we're now using the long trespass command
correctly. And finally there's now an check at init time
to refuse to attach to devices not supporting EMC-specific
VPD pages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:51 -04:00
Hannes Reinecke 765cbc6dad [SCSI] scsi_dh: Implement common device table handling
Instead of having each and every driver implement its own
device table scanning code we should rather implement a common
routine and scan the device tables there.
This allows us also to implement a general notifier chain
callback for all device handler instead for one per handler.

[sekharan: Fix rejections caused by conflicting bug fix]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:51 -04:00
Matthew Wilcox 6d49f63b41 [SCSI] Make host_no an unsigned int
Daniel Debonzi reports that he has managed to wrap host_no.  Increasing
the number of host numbers available to 32-bit from 16-bit allows the
problem to be evaded for another hundred years.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:50 -04:00
Kay Sievers aab0de2451 driver core: remove KOBJ_NAME_LEN define
Kobjects do not have a limit in name size since a while, so stop
pretending that they do.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:52 -07:00
Linus Torvalds 89a93f2f48 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
  [SCSI] scsi_dh: fix kconfig related build errors
  [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
  [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
  [SCSI] make struct scsi_{host,target}_type static
  [SCSI] fix locking in host use of blk_plug_device()
  [SCSI] zfcp: Cleanup external header file
  [SCSI] zfcp: Cleanup code in zfcp_erp.c
  [SCSI] zfcp: zfcp_fsf cleanup.
  [SCSI] zfcp: consolidate sysfs things into one file.
  [SCSI] zfcp: Cleanup of code in zfcp_aux.c
  [SCSI] zfcp: Cleanup of code in zfcp_scsi.c
  [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
  [SCSI] zfcp: Small QDIO cleanups
  [SCSI] zfcp: Adapter reopen for large number of unsolicited status
  [SCSI] zfcp: Fix error checking for ELS ADISC requests
  [SCSI] zfcp: wait until adapter is finished with ERP during auto-port
  [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
  [SCSI] sg: Add target reset support
  [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
  [SCSI] sd: Move scsi_disk() accessor function to sd.h
  ...
2008-07-15 18:58:04 -07:00
Chandra Seetharaman fe9233fb69 [SCSI] scsi_dh: fix kconfig related build errors
Do not automatically "select" SCSI_DH for dm-multipath. If SCSI_DH
doesn't exist,just do not allow  hardware handlers to be used.

Handle SCSI_DH being a module also. Make sure it doesn't allow DM_MULTIPATH
to be compiled in when SCSI_DH is a module.

[jejb: added comment for Kconfig syntax]
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-15 09:16:43 -05:00
Stefan Richter d2886ea368 scsi: sd: optionally set power condition in START STOP UNIT
Adds a new scsi_device flag, start_stop_pwr_cond:  If enabled, the sd
driver will not send plain START STOP UNIT commands but ones with the
power condition field set to 3 (standby) or 1 (active) respectively.

Some FireWire disk firmwares do not stop the motor if power condition is
zero.  Or worse, they become unresponsive after a START STOP UNIT with
power condition = 0 and start = 0.

http://lkml.org/lkml/2008/4/29/704

This patch only adds the necessary code to sd_mod but doesn't activate
it.  Follow-up patches to the FireWire drivers will add detection of
affected devices and enable the code for them.

I did not add power condition values to scsi_error.c::scsi_eh_try_stu()
for now.  The three firmwares which suffer from above mentioned problems
do not need START STOP UNIT in the error handler, and they are not
adversely affected by START STOP UNIT with power condition = 0 and start
= 1 (like scsi_eh_try_stu() sends it if scsi_device.allow_restart is
enabled).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Tino Keitel <tino.keitel@gmx.de>
2008-07-14 13:00:17 +02:00
Alexander Beregalov 02a1e3ce7d [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:37 -05:00
Martin Petermann feac6a07c4 [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
Move the accessor functions for the scsi_cmnd status from zfcp to the
SCSI include file. Change the interface to the functions to pass the
scsi_cmnd pointer instead of the status pointer.

Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:34 -05:00
Brian King 39120e1170 [SCSI] sg: Add target reset support
Adds support for target reset to SG_SCSI_RESET.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:32 -05:00
Martin K. Petersen aa91696e56 [SCSI] sd: Move sd.h header file
Christoph objected to having sd.h in include/scsi since it is internal
to the sd driver.  Move it to drivers/scsi/sd.h.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:31 -05:00
Boaz Harrosh 30e9ba9f20 [SCSI] iscsi_tcp: Enable any size command
Let through upto the largest command of 260 defined by the scsi standard.
iscsi core supports this already. Now that the scsi-ml supports it we can
start using large commands.

[jejb:rejections fixed up]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:23 -05:00
Mike Christie 913e5bf435 [SCSI] libiscsi, iser, tcp: remove recv_lock
The recv lock was defined so the iscsi layer could block
the recv path from processing IO during recovery. It
turns out iser just set a lock to that pointer which was pointless.

We now disconnect the transport connection before doing recovery
so we do not need the recv lock. For iscsi_tcp we still stop
the recv path incase older tools are being used.

This patch also has iscsi_itt_to_ctask user grab the session lock
and has the caller access the task with the lock or get a ref
to it in case the target is broken and sends a tmf success response
then sends data or a response for the command that was supposed to
be affected bty the tmf.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:22 -05:00
Mike Christie 3cf7b233ff [SCSI] libiscsi: fix cmds_max setting
Drivers expect that the cmds_max value they pass to the iscsi layer
is the max scsi commands  + mgmt tasks. This patch implements that
and fixes some checks for nr cmd limits.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:21 -05:00
Mike Christie 88dfd340b9 [SCSI] iscsi class: Add session initiatorname and ifacename sysfs attrs.
This adds two new attrs used for creating initiator ports and
binding sessions to hardware.

The session level initiatorname:

Since bnx2i does a scsi_host per host device, we need to add the
iface initiator port settings on the session, so we can create
multiple initiator ports (each with different inames) per device/scsi_host.

The current iname reflects that qla4xxx can have one iname per hba, and we are
allocating a host per session for software. The iname on the host will
remain so we can export and set the hba level qla4xxx setting.

The ifacename attr:

To bind a session to a some peice of hardware in userspace we maintain
some mappings, but during boot or iscsid restart (iscsid contains the user
space part of the driver) we need to be able to figure out which of those
host mappings abstractions maps to certain sessions. This patch adds
a ifacename attr, which userspace can set to id the host side of the
endpoint across pivot_roots and iscsid restarts.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:21 -05:00
Mike Christie d82ff9be73 [SCSI] iscsi class: add endpoint class
Add sysfs representation for the endpoint, so userspace can match the
host and session to the endpoint. This will allow us to set the host's
parent correctly at host creation time.

The next patches will convert tcp and iser, and fix iser's dma_mask
bug.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:20 -05:00
Mike Christie 7970634b81 [SCSI] iscsi class: user device_for_each_child instead of duplicating session list
Currently we duplicate the list of sessions, because we were using the
test for if a session was on the host list to indicate if the session
was bound or unbound. We can instead use the target_id and fix up
the class so that drivers like bnx2i do not have to manage the target id
space.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:20 -05:00
Mike Christie 9c19a7d038 [SCSI] libiscsi: rename iscsi_cmd_task to iscsi_task
This is the second part of the iscsi task merging, and
all it does it rename iscsi_cmd_task to iscsi_task and
mtask/ctask to just task.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:19 -05:00
Mike Christie 3e5c28ad03 [SCSI] libiscsi: merge iscsi_mgmt_task and iscsi_cmd_task
There is no need to have the mgmt and cmd tasks separate
structs. It used to save a lot of memory when we overprealocated
memory for tasks, but the next patches will set up the
driver so in the future they can use a mempool or some other
common scsi command allocator and common tagging.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:19 -05:00
Mike Christie 0af967f5d4 [SCSI] libiscsi, iscsi_tcp, iser: add session cmds array accessor
Currently to get a ctask from the session cmd array, you have to
know to use the itt modifier. To make this easier on LLDs and
so in the future we can easilly kill the session array and use
the host shared map instead, this patch adds a nice wrapper
to strip the itt into a session->cmds index and return a ctask.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:18 -05:00
Mike Christie 5af3e91d23 [SCSI] iscsi: modify iscsi printk so it can take driver data pointers
Some drivers want to be able to just pass in the driver data pointers
to the iscsi objects. To enable this we need the iscsi printk macro
to cast the object.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:17 -05:00
Mike Christie 5d91e209fb [SCSI] iscsi: remove session/conn_data_size from iscsi_transport
This removes the session and conn data_size fields from the iscsi_transport.
Just pass in the value like with host allocation. This patch also makes
it so the LLD iscsi_conn data is allocated with the iscsi_cls_conn.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:16 -05:00
Mike Christie a4804cd6eb [SCSI] iscsi: add iscsi host helpers
This finishes the host/session unbinding, by adding some helpers
to add and remove hosts and the session they manage.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:16 -05:00
Mike Christie 756135215e [SCSI] iscsi: remove session and host binding in libiscsi
bnx2i allocates a host per netdevice but will use libiscsi,
so this unbinds the session from the host in that code.

This will also be useful for the iser parent device dma settings
fixes.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:16 -05:00
Mike Christie 32c6e1b9a2 [SCSI] iscsi class: rename iscsi_host to iscsi_cls_host
This renames the iscsi_host to iscsi_cls_host to match the other
structs, because libiscsi wants to use the iscsi_host name in
the future.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:15 -05:00
Mike Christie d3826721b1 [SCSI] iscsi class, iscsi drivers: remove unused iscsi_transport attrs
max_cmd_len and max_conn are not really used. max_cmd_len is
always 16 and can be set by the LLD. max_conn is always one
since we do not support MCS.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:15 -05:00
Mike Christie 40753caa36 [SCSI] iscsi class, iscsi_tcp/iser: add host arg to session creation
iscsi offload (bnx2i and qla4xx) allocate a scsi host per hba,
so the session creation path needs a shost/host_no argument.
Software iscsi/iser will follow the same behabior as before
where it allcoates a host per session, but in the future iser
will probably look more like bnx2i where the host's parent is
the hardware (rnic for iser and for bnx2i it is the nic), because
it does not use a socket layer like how iscsi_tcp does.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:15 -05:00
Chandra Seetharaman a6a8d9f87e [SCSI] scsi_dh: add infrastructure for SCSI Device Handlers
Some of the storage devices (that can be accessed through multiple paths),
do need some special handling for
	1. Activating the passive path of the storage access.
	2. Decode and handle the special sense codes returned by the devices.
	3. Handle the I/Os being sent to the passive path, especially
           during the device probe time.
when accessed through multiple paths.

As of today this special device handling is done at the dm-multipath
layer using dm-handlers. That works well for (1); for (2) to be handled
at dm layer, scsi sense information need to be exported from SCSI to dm-layer,
which is not very attractive; (3) cannot be done at all at the dm layer.

Device handler has been moved to SCSI mainly to handle (2) and (3) properly.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:23:40 -05:00
Linus Torvalds d626e3bf72 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] aic94xx: fix section mismatch
  [SCSI] u14-34f: Fix 32bit only problem
  [SCSI] dpt_i2o: sysfs code
  [SCSI] dpt_i2o: 64 bit support
  [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent
  [SCSI] dpt_i2o: use standard __init / __exit code
  [SCSI] megaraid_sas: fix suspend/resume sections
  [SCSI] aacraid: Add Power Management support
  [SCSI] aacraid: Fix jbod operations scan issues
  [SCSI] aacraid: Fix warning about macro side-effects
  [SCSI] add support for variable length extended commands
  [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
  [SCSI] bsg: add large command support
  [SCSI] aacraid: Fix down_interruptible() to check the return value correctly
  [SCSI] megaraid_sas; Update the Version and Changelog
  [SCSI] ibmvscsi: Handle non SCSI error status
  [SCSI] bug fix for free list handling
  [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions
  [SCSI] megaraid_mbox: fix Dell CERC firmware problem
2008-05-02 13:52:35 -07:00
Boaz Harrosh db4742dd8f [SCSI] add support for variable length extended commands
Add support for variable-length, extended, and vendor specific
CDBs to scsi-ml. It is now possible for initiators and ULD's
to issue these types of commands. LLDs need not change much.
All they need is to raise the .max_cmd_len to the longest command
they support (see iscsi patch).

- clean-up some code paths that did not expect commands to be
  larger than 16, and change cmd_len members' type to short as
  char is not enough.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02 11:33:25 -05:00
Boaz Harrosh 64a87b244b [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
- struct scsi_cmnd had a 16 bytes command buffer of its own.
   This is an unnecessary duplication and copy of request's
   cmd. It is probably left overs from the time that scsi_cmnd
   could function without a request attached. So clean that up.

 - Once above is done, few places, apart from scsi-ml, needed
   adjustments due to changing the data type of scsi_cmnd->cmnd.

 - Lots of drivers still use MAX_COMMAND_SIZE. So I have left
   that #define but equate it to BLK_MAX_CDB. The way I see it
   and is reflected in the patch below is.
   MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB
                      as per the SCSI standard and is not related
                      to the implementation.
   BLK_MAX_CDB.     - The allocated space at the request level

 - I have audit all ISA drivers and made sure none use ->cmnd in a DMA
   Operation. Same audit was done by Andi Kleen.

(*)fixed-length here means commands that their size can be determined
   by their opcode and the CDB does not carry a length specifier, (unlike
   the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
   true and the SCSI standard also defines extended commands and
   vendor specific commands that can be bigger than 16 bytes. The kernel
   will support these using the same infrastructure used for VARLEN CDB's.
   So in effect MAX_COMMAND_SIZE means the maximum size command
   scsi-ml supports without specifying a cmd_len by ULD's

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02 10:18:22 -05:00
Eli Dorfman 87528227df IB/iser: Count FMR alignment violations per session
Count FMR alignment violations per session as part of the iscsi
statistics.

Signed-off-by: Eli Dorfman <elid@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
James Bottomley 643eb2d932 [SCSI] rework scsi_target allocation
The current target allocation code registeres each possible target
with sysfs; it will be deleted again if no useable LUN on this target
was found. This results in a string of 'target add/target remove' uevents.

Based on a patch by Hannes Reinecke <hare@suse.de> this patch reworks
the target allocation code so that only uevents for existing targets
are sent. The sysfs registration is split off from the existing
scsi_target_alloc() into a in a new scsi_add_target() function, which
should be called whenever an existing target is found. Only then a
uevent is sent, so we'll be generating events for existing targets
only.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-22 15:16:31 -05:00
Linus Torvalds e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Tony Jones ee959b00c3 SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:33 -07:00
Matthew Wilcox 5a6483feb0 include: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they (or some user of them) rely
on it dragging in some unrelated header file, but I can't build all
these files, so we'll have to fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:54 -04:00
Boaz Harrosh 38d1c069db [SCSI] iscsi: extended cdb support
Support for extended CDBs in iscsi.
All we need is to check if command spills over 16 bytes then allocate
an iscsi-extended-header for the leftovers.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18 11:51:19 -05:00
James Bottomley 79bc14813c [SCSI] libsas: fix missing inlines in header file
Two functions in include/scsi/sas_ata.h don't have static inlines
leading to problems if they're built in:

On Thu, 2008-04-03 at 14:06 +0200, Toralf Förster wrote:
> drivers/scsi/mvsas.o: In function `sas_ata_init_host_and_port':
> mvsas.c:(.text+0x0): multiple definition of `sas_ata_init_host_and_port'
> drivers/scsi/libsas/built-in.o:(.text+0x37f4): first defined here
> drivers/scsi/mvsas.o: In function `sas_ata_task_abort':
> mvsas.c:(.text+0x7): multiple definition of `sas_ata_task_abort'
> drivers/scsi/libsas/built-in.o:(.text+0x37fb): first defined here
> make[2]: *** [drivers/scsi/built-in.o] Error 1
> make[1]: *** [drivers/scsi] Error 2
> make: *** [drivers] Error 2

Add the correct static inline modifiers.

Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
FUJITA Tomonori 3bc6a26192 [SCSI] add scsi_build_sense_buffer helper function
This adds scsi_build_sense_buffer, a simple helper function to build
sense data in a buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:01 -05:00
James Bottomley 1c353f7d61 [SCSI] export command allocation and freeing functions independently of the host
This is needed by things like USB storage that want to set up static
commands for later use at start of day.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:57 -05:00
FUJITA Tomonori 9ac16b616a [SCSI] scsi: add wrapper functions for sg buffer copy helper functions
LLDs need to copies data between the SG table in struct scsi_cmnd and
liner buffer. So they use the helper functions like

sg_copy_from_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen)
sg_copy_to_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen)

This patch just adds wrapper functions:

scsi_sg_copy_from_buffer(sc, buf, buflen)
scsi_sg_copy_to_buffer(sc, buf, buflen)

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:45 -05:00
Mike Christie 30bd7df8ce [SCSI] scsi_error: add target reset handler
The problem is that serveral drivers are sending a target reset from the
device reset handler, and if we have multiple devices a target reset gets
sent for each device when only one would be sufficient. And if we do a target
reset it affects all the commands on the target so the device reset handler
code only cleaning up one devices's commands makes programming the driver a
little more difficult than it should be.

This patch adds a target reset handler, which drivers can use to send
a target reset. If successful it cleans up the commands for a devices
accessed through that starget.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
Darrick J. Wong 45e6cdf414 [SCSI] libsas: Provide a transport-level facility to request SAS addrs
Provide a facility to use the request_firmware() interface to get a SAS
address from userspace.  This can be used by SAS LLDDs that cannot
obtain the address from the host adapter.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:38 -05:00
Mike Christie 45ab33b6c1 [SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking
For qla4xxx, we could be starting a session, but some error (network,
target, IO from a device that got started, etc) could cause the session
to fail and curring the block/unblock and state manipulation could race
with each other. This patch just has those operations done in the
single threaded iscsi eh work queue, so that way they are serialized.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-05 12:04:09 -06:00
James Bottomley 5319578ca3 [SCSI] libsas: export sas_find_local_phy function
This is needed by the to be added I_T reset function in aic94xx.  It
needs to know the local phy so it can send a link or hard reset along
the path.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:52:30 -06:00
James Bottomley 4660c8ed5a [SCSI] update SG_ALL to avoid causing chaining
Since the sg chaining patches went in, our current value of 255 for
SG_ALL excites chaining on some drivers which cannot support it (and
would thus oops).  Redefine SG_ALL to mean no sg table size
preference, but use the single allocation (non chained) limit.  This
also helps for drivers that use it to size an internal table.

We'll do an opt in system later where truly chaining supporting
drivers can define their sg_tablesize to be anything up to
SCSI_MAX_SG_CHAIN_ELEMENTS.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 13:40:13 -06:00
Pavel Machek d850bd34f5 [SCSI] Small cleanups for scsi_host.h
Small cleanups in scsi_host.h. Few #defines make me wonder if their
description is still up to date..?

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:43 -06:00
James Bottomley 89dddbce9c [SCSI] add protocol definitions
A lot of SCSI command replies have a protocol ID field.  Add
definitions for the interpretation of that from SPC-3.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:41 -06:00
Mike Christie 8b1d03434e [SCSI] libiscsi: fix session age rollover and remove cid encoding
The session age mask is only 4 bits, but session->age is 32. When
it gets larger then 15 and we try to or the bits some bits get
dropped and the check for session age in iscsi_verify_itt is useless.

The ISCSI_CID_MASK related bits are also useless since cid is always
one.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie 322d739da8 [SCSI] iscsi: fix up iscsi printk prefix
Some iscsi class messages have the dev_printk prefix and some libiscsi
and iscsi_tcp messages have "iscsi" or the module name as a prefix which
is normally pretty useless when trying to figure out which session
or connection the message is attached to. This patch adds iscsi lib
and class dev_printks so all messages have a common prefix that
can be used to figure out which object printed it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie 8aae18adb2 [SCSI] iscsi class: add async scan helper
In qla4xxx's probe it will call the iscsi session setup functions
for session that got setup on the initial start. This then makes
it easy for the iscsi class to export a helper which indicates
when those scans are done.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie bd976f62cd [SCSI] iscsi class: add session scanning
This just adds iscsi session scanning which works like fc rport scanning.
The future patches will hook the drivers into Mathew Wilcox's async
scanning infrastructure, so userspace does not have to special case
iscsi and so userspace does not have to make a extra special case for
hardware iscsi root scanning.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie 6eabafbe66 [SCSI] iscsi class, libiscsi: add iscsi sysfs session state file
This adds a iscsi session state file which exports the session
state for both software and hardware iscsi. It also hooks libiscsi
in.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Adrian Bunk f8d9d654fc [SCSI] libiscsi: make __iscsi_complete_pdu() static
__iscsi_complete_pdu() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Joe Perches 1e4478c325 include/scsi/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:47:00 +02:00
FUJITA Tomonori c639d14e2f [SCSI] scsi_debug: add XDWRITEREAD_10 support
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:25 -06:00
James Bottomley d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00
Boaz Harrosh 6f9a35e2da [SCSI] bidirectional command support
At the block level bidi request uses req->next_rq pointer for a second
bidi_read request.
At Scsi-midlayer a second scsi_data_buffer structure is used for the
bidi_read part. This bidi scsi_data_buffer is put on
request->next_rq->special. Struct scsi_cmnd is not changed.

- Define scsi_bidi_cmnd() to return true if it is a bidi request and a
  second sgtable was allocated.

- Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer
  from this command This API is to isolate users from the mechanics of
  bidi.

- Define scsi_end_bidi_request() to do what scsi_end_request() does but
  for a bidi request. This is necessary because bidi commands are a bit
  tricky here. (See comments in body)

- scsi_release_buffers() will also release the bidi_read scsi_data_buffer

- scsi_io_completion() on bidi commands will now call
  scsi_end_bidi_request() and return.

- The previous work done in scsi_init_io() is now done in a new
  scsi_init_sgtable() (which is 99% identical to old scsi_init_io())
  The new scsi_init_io() will call the above twice if needed also for
  the bidi_read command. Only at this point is a command bidi.

- In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not
  confused by a get-sense command that looks like bidi. This is done
  by puting NULL at request->next_rq, and restoring.

[jejb: update to sg_table and resolve conflicts
also update to blk-end-request and resolve conflicts]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:41 -06:00
Boaz Harrosh 30b0c37b27 [SCSI] implement scsi_data_buffer
In preparation for bidi we abstract all IO members of scsi_cmnd,
that will need to duplicate, into a substructure.

- Group all IO members of scsi_cmnd into a scsi_data_buffer
  structure.
- Adjust accessors to new members.
- scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of
  scsi_cmnd. And work on it.
- Adjust scsi_init_io() and  scsi_release_buffers() for above
  change.
- Fix other parts of scsi_lib/scsi.c to members migration. Use
  accessors where appropriate.

- fix Documentation about scsi_cmnd in scsi_host.h

- scsi_error.c
  * Changed needed members of struct scsi_eh_save.
  * Careful considerations in scsi_eh_prep/restore_cmnd.

- sd.c and sr.c
  * sd and sr would adjust IO size to align on device's block
    size so code needs to change once we move to scsi_data_buff
    implementation.
  * Convert code to use scsi_for_each_sg
  * Use data accessors where appropriate.

- tgt: convert libsrp to use scsi_data_buffer

- isd200: This driver still bangs on scsi_cmnd IO members,
  so need changing

[jejb: rebased on top of sg_table patches fixed up conflicts
and used the synergy to eliminate use_sg and sg_count]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
Boaz Harrosh bb52d82f45 [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable
If we export scsi_init_io()/scsi_release_buffers() instead of
scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more
insulated from scsi_lib changes. As a bonus it will also gain bidi
capability when it comes.

[jejb: rebase on to sg_table and fix up rejections]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
Jens Axboe 5ed7959ede SG: Convert SCSI to use scatterlist helpers for sg chaining
Also change scsi_alloc_sgtable() to just return 0/failure, since it
maps to the command passed in. ->request_buffer is now no longer needed,
once drivers are adapted to use scsi_sglist() it can be killed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:05:27 +01:00
James Bottomley 366ca51f30 [SCSI] libsas: abstract STP task status into a function
Break out the frame processor for STP tasks from aic94xx so they can
be shared by other SAS HBA's

Original patch from Jeff Garzik <jeff@garzik.org>

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 11:47:23 -06:00
FUJITA Tomonori de25deb180 [SCSI] use dynamically allocated sense buffer
This removes static array sense_buffer in scsi_cmnd and uses
dynamically allocated sense_buffer (with GFP_DMA).

The reason for doing this is that some architectures need cacheline
aligned buffer for DMA:

http://lkml.org/lkml/2007/11/19/2

The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer
to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's
necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves
these issues.

__scsi_get_command allocates sense_buffer via kmem_cache_alloc and
attaches it to a scsi_cmnd so everything just work as before.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:37:37 -06:00
James Bottomley b30c2fc111 [SCSI] scsi.h: add macro for enclosure bit of inquiry data
The macro tells us whether the device is (or contains) an enclosure device.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:35 -06:00
Hans de Goede a0899d4df5 [SCSI] sd: add fix for devices with last sector access problems
This patch adds a new scsi_device flag (last_sector_bug) for devices
which contain a bug where the device crashes when the last sector is
read in a larger then 1 sector read.

This is for example the case with sdcards in the HP PSC1350 printer
cardreader and in the HP PSC1610 printer cardreader.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:34 -06:00
James Bottomley 32e8ae36b8 [SCSI] libsas: don't use made up error codes
This is bad for two reasons:

     1. If they're returned to outside applications, no-one knows what
        they mean.
     2. Eventually they'll clash with the ever expanding standard error
        codes.

The problem error code in question is ETASK.  I've replaced this by
ECOMM (communications error on send) a network error code that seems to
most closely relay what ETASK meant.

Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:29:15 -06:00
James Bottomley b98e66fa0b [SCSI] libsas: add host SMP processing
This adds support for host side SMP processing, via a separate
SMP interpreter file.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:29:11 -06:00
Olaf Kirch a8ac6311cc [SCSI] iscsi: convert xmit path to iscsi chunks
Convert xmit to iscsi chunks.

from michaelc@cs.wisc.edu:

Bug fixes, more digest integration, sg chaining conversion and other
sg wrapper changes, coding style sync up, and removal of io fields,
like pdu_sent, that are not needed.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:42 -06:00
Mike Christie f6d5180c78 [SCSI] libiscsi: fix nop handling
During root boot and shutdown the target could send us nops.
At this time iscsid cannot be running, so the target will drop
the session and the boot or shutdown will hang.

To handle this and allow us to better control when to check the network
this patch moves the nop handling to the kernel.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:35 -06:00
Mike Christie 2697478903 [SCSI] libiscsi: fix shutdown
We were using the device delete sysfs file to remove each device
then logout. Now in 2.6.21 this will not work because
the sysfs delete file returns immediately and does not wait for
the device removal to complete. This causes a hang if a cache sync
is needed during shutdown. Before .21, that approach had other
problems, so this patch fixes the shutdown code so that we remove the target
and unbind the session before logging out and shut down the session

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:33 -06:00
Mike Christie b3a7ea8d50 [SCSI] libiscsi: do not block session during logout
There is not need to block the session during logout. Since
we are going to fail the commands that were blocked just fail them
immediately instead.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:28 -06:00
Olaf Kirch 6320377fd9 [SCSI] libiscsi, iscsi_tcp: iscsi pool cleanup
iscsi_pool_init simplified

iscsi_pool_init currently has a lot of duplicate kfree() calls it does
when some allocation fails. This patch simplifies the code a little by
using iscsi_pool_free to tear down the pool in case of an error.

iscsi_pool_init also returns a copy of the item array to the caller.
Not all callers use this array, so we make it optional.

Instead of allocating a second array and return that, allocate just one
array, of twice the size.

Update users of iscsi_pool_{init,free}

This patch drops the (now useless) second argument to
iscsi_pool_free, and updates all callers.

It also removes the ctask->r2ts array, which was never
used anyway. Since the items argument to iscsi_pool_init
is now optional, we can pass NULL instead.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:27 -06:00
Boaz Harrosh 004d6530f8 [SCSI] iscsi_tcp, libiscsi: initial AHS Support
at libiscsi generic code
  - currently code assumes a storage space of pdu header is allocated
    at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add
    a hdr_max field pertaining to that storage, and an hdr_len that
    accumulates the current use of the pdu-header.

  - Add an iscsi_next_hdr() inline which returns the next free space
    to write new Header at. Also iscsi_next_hdr() is used to retrieve
    the address at which to write the header-digest.

  - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr()
    for address of the new header, than calls iscsi_add_hdr(length) with
    the size of the new header. iscsi_add_hdr() will check if space is
    available and update to the new size. length must be padded according
    to standard.

  - Add 2 padding inline helpers thanks to Olaf. Current patch does not
    use them but Following patches will.
    Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had
    PAD_WORD_LEN that was never used anywhere.

  - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now  it is
    possible that it will fail.

  - I was tired of yet again writing a "this is a digest" comment next to
    sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need
    any comments. Changed all places that used sizeof(__u32) or "4" in
    connection to a digest.

  iscsi_tcp specific code
  - At struct iscsi_tcp_cmd_task allocate maximum space allowed in
    standard for all headers following the iscsi_cmd header. and mark
    it so in iscsi_tcp_session_create()
  - At iscsi_send_cmd_hdr() retrieve the correct headers size and
    write header digest at iscsi_next_hdr().

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:23 -06:00
Olaf Kirch da32dd681f [SCSI] iscsi_tcp: rewrite recv path
Rewrite recv path. Fixes:
- data digest processing and error handling.
- ahs support.

Some fixups by Mike Christie

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:20 -06:00
Mike Christie 843c0a8a76 [SCSI] libiscsi, iscsi_tcp: add device support
This patch adds logical unit reset support. This should work for ib_iser,
but I have not finished testing that driver so it is not hooked in yet.

This patch also temporarily reverts the iscsi_tcp r2t write out patch.
That code is completely rewritten in this patchset.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:19 -06:00
James Bottomley 001aac257c [SCSI] sd,sr: add early detection of medium not present
The current scsi_test_unit_ready() is updated to return sense code
information (in struct scsi_sense_hdr).  The sd and sr drivers are
changed to interpret the sense code return asc 0x3a as no media and
adjust the device status accordingly.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:50 -06:00
Tony Battersby 25d7c363f2 [SCSI] move single_lun flag from scsi_device to scsi_target
Some SCSI tape medium changers that need the BLIST_SINGLELUN flag have
the medium changer at one LUN and the tape drive at a different LUN.
The inquiry string of the tape drive may be different from that of the
medium changer.  In order for single_lun to be effective, every
scsi_device under a given scsi_target must have it set.  This means that
there needs to be a blacklist entry for BOTH the medium changer AND the
tape drive, which is impractical because some medium changers may be
paired with a variety of different tape drive models.  It makes more
sense to put the single_lun flag in scsi_target instead of scsi_device,
which causes every device at a given target ID to inherit the single_lun
flag from one LUN.  This makes it possible to blacklist just the medium
changer and not the tape drive.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:44 -06:00
Darrick J. Wong 8ee24023ef [SCSI] libsas: Fix various sparse complaints
Annotate sas_queuecommand with locking details, and clean up a few
more sparse warnings about static/non-static declarations.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:41 -06:00
Darrick J. Wong 5929faf333 [SCSI] libsas: Convert sas_proto users to sas_protocol
sparse complains about the mixing of enums in libsas.  Since the
underlying numeric values of both enums are the same, combine them
to get rid of the warning.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:41 -06:00
Kay Sievers 285e9670d9 [SCSI] sr,sd: send media state change modification events
This will send for a card reader slot (remove/add media):
  UEVENT[1187091572.155884] change   /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi)
  UEVENT[1187091572.162314] remove   /block/sdb/sdb1 (block)
  UEVENT[1187091572.172464] add      /block/sdb/sdb1 (block)
  UEVENT[1187091572.175408] change   /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi)

and for a DVD drive (add/eject media):
  UEVENT[1187091590.189159] change   /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi)
  UEVENT[1187091590.957124] add      /module/isofs (module)
  UEVENT[1187091604.468207] change   /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi)

Userspace gets events, even for unpartitioned media. This unifies
the event handling for asynchronoous events (AN) and events caused by
perodical polling the device from userspace.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>

[jejb: modified for new event API]

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:30 -06:00
Linus Torvalds 7b3d9545f9 Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0, which gets
us back the original cleanup of 6f5391c283.

It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.

The real problem seems to have been found by Peter Osterlund:

  "pktcdvd sets it [block device size] when opening the /dev/pktcdvd
   device, but when the drive is later opened as /dev/scd0, there is
   nothing that sets it back.  (Btw, 40944 is possible if the disk is a
   CDRW that was formatted with "cdrwtool -m 10236".)

   The problem is that pktcdvd opens the cd device in non-blocking mode
   when pktsetup is run, and doesn't close it again until pktsetup -d is
   run.  The effect is that if you meanwhile open the cd device,
   blkdev.c:do_open() doesn't call bd_set_size() because
   bdev->bd_openers is non-zero."

In particular, to repeat the bug (regardless of whether commit
6f5391c283 is applied or not):

  " 1. Start with an empty drive.
    2. pktsetup 0 /dev/scd0
    3. Insert a CD containing an isofs filesystem.
    4. mount /dev/pktcdvd/0 /mnt/tmp
    5. umount /mnt/tmp
    6. Press the eject button.
    7. Insert a DVD containing a non-writable filesystem.
    8. mount /dev/scd0 /mnt/tmp
    9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
    10. If the DVD contains data beyond the physical size of a CD, you
        get I/O errors in the terminal, and dmesg reports lots of
        "attempt to access beyond end of device" errors."

which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).

The proper fix for that is probably to just do something like

	bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;

in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).

Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 10:17:12 -08:00
Ingo Molnar ac40532ef0 scsi: revert "[SCSI] Get rid of scsi_cmnd->done"
This reverts commit 6f5391c283 ("[SCSI]
Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit,
but apparently it causes regressions:

  Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device
  http://bugzilla.kernel.org/show_bug.cgi?id=9370

this patch should be reintroduced in a more split-up form to make
testing of it easier.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02 13:11:06 -08:00
Maciej W. Rozycki 522939d45c esp_scsi: fix reset cleanup spinlock recursion
The esp_reset_cleanup() function is called with the host lock held and
invokes starget_for_each_device() which wants to take it too.  Here is a
fix along the lines of shost_for_each_device()/__shost_for_each_device()
adding a __starget_for_each_device() counterpart which assumes the lock
has already been taken.

Eventually, I think the driver should get modified so that more work is
done as a softirq rather than in the interrupt context, but for now it
fixes a bug that causes the spinlock debugger to fire.

While at it, it fixes a small number of cosmetic problems with
starget_for_each_device() too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10 19:43:55 -08:00
Jeff Garzik a341cd0f6a SCSI: add asynchronous event notification API
Originally based on a patch by Kristen Carlson Accardi @ Intel.
Copious input from James Bottomley.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-03 22:23:02 -04:00
Adrian Bunk 87ae9afdca cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
James Bottomley 645a0c6c48 [SCSI] include linux/scatterlist.h in scsi_eh.h
Spotted by Paul Jackson <pj@sgi.com>

The error handler rework moved the scatterlist into a globally exposed
structure in scsi_eh.h; unfortunately, the scatterlist include needs
to move from scsi_error.c to scsi_eh.h to allow this to compile
universally.

Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-17 21:53:56 -04:00
Olaf Hering e629a7ddc0 do not export /usr/include/scsi in make headers_install
/usr/include/scsi is provided by glibc.
Remove the scsi export from make headers_install target.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:52 -07:00
FUJITA Tomonori 2a7c59e79c remove sglist_len
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:24:44 +02:00
FUJITA Tomonori 9cb83c7529 [SCSI] add use_sg_chaining option to scsi_host_template
This option is true if a low-level driver can support sg
chaining. This will be removed eventually when all the drivers are
converted to support sg chaining. q->max_phys_segments is set to
SCSI_MAX_SG_SEGMENTS if false.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:24:32 +02:00
Jens Axboe a8474ce23a SCSI: support for allocating large scatterlists
This is what enables large commands. If we need to allocate an
sgtable that doesn't fit in a single page, allocate several
SCSI_MAX_SG_SEGMENTS sized tables and chain them together.

SCSI defaults to large chained sg tables, if the arch supports it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:12:53 +02:00
Jens Axboe 0cde8d9510 scsi: simplify scsi_free_sgtable()
Just pass in the command, no point in passing in the scatterlist
and scatterlist pool index seperately.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:12:37 +02:00
Jens Axboe c6132da170 scsi: convert to using sg helpers
This converts the SCSI mid layer to using the sg helpers for looking up
sg elements, instead of doing it manually.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:08:49 +02:00
Linus Torvalds df3d80f5a5 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...
2007-10-15 08:19:33 -07:00
Boaz Harrosh e1c234685c [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
- Drivers/transports that want to send a synchronous REQUEST_SENSE command
   as part of their .queuecommand sequence, have 2 new API's that facilitate
   in doing so and abstract them from scsi-ml internals.

   void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
	struct scsi_eh_save *sesci, unsigned char *cmnd,
	int cmnd_size, int sense_bytes)

   Will hijack a command and prepare it for request sense if needed.
   And will save any later needed info into a scsi_eh_save structure.

   void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
	struct scsi_eh_save *sesci);

   Will undo any changes done to a command by above function. Making
   it ready for completion.

 - Re-factor scsi_send_eh_cmnd() to use above APIs

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:58 -04:00
Michael S. Tsirkin d773c082da [SCSI] scsi_transport_iscsi: add list, mutex includes
scsi/scsi_transport_iscsi.h uses struct mutex and struct list_head,
so while linux/mutex.h and linux/list.h seem to be pulled in indirectly
by one of the headers it includes, the right thing
is to include linux/mutex.h and linus/list.h directly.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:38 -04:00
Matthew Wilcox 6f5391c283 [SCSI] Get rid of scsi_cmnd->done
The ULD ->done callback moves into the scsi_driver.  By moving the call
to scsi_io_completion() from scsi_blk_pc_done() to scsi_finish_command(),
we can eliminate the latter entirely.  By returning 'good_bytes' from
the ->done callback (rather than invoking scsi_io_completion()), we can
stop exporting scsi_io_completion().

Also move the prototypes from sd.h to sd.c as they're all internal anyway.
Rename sd_rw_intr to sd_done and rw_intr to sr_done.

Inspired-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:46 -04:00
James Bottomley 311b581e1d [SCSI] Fix device not ready printk
Because scsi_print_sense_hdr prefixes with KERN_INFO, the output from
scsi_io_completion looks like:

sd 0:0:0:0: [sdb] Device not ready: <6>: Sense Key : 0x2 [current]
: ASC=0x4 ASCQ=0x3

By using scsi_show_sense_hdr, we can get the much more appealing output:

sd 0:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
sd 0:0:0:0: [sdb] Device not ready: ASC=0x4 ASCQ=0x3

Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:56 -04:00
Matthew Wilcox 12a441622b [SCSI] Remove ->pid field from scsi_cmnd
The pid field is a duplicate of the serial_number field and has been
scheduled for removal for a long time.  A few drivers were still using
it, so just change them to use serial_number instead.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:52 -04:00
James Bottomley 7f9a6bc4e9 [SCSI] move ULD attachment into the prep function
One of the intents of the block prep function was to allow ULDs to use
it for preprocessing.  The original SCSI model was to have a single prep
function and add a pointer indirect filter to build the necessary
commands.  This patch reverses that, does away with the init_command
field of the scsi_driver structure and makes ULDs attach directly to the
prep function instead.  The value is really that it allows us to begin
to separate the ULDs from the SCSI mid layer (as long as they don't use
any core functions---which is hard at the moment---a ULD doesn't even
need SCSI to bind).

Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:30 -04:00
FUJITA Tomonori 7525236d0b [SCSI] fc_transport: add target driver support
This adds minimum target driver support like the srp transport does:

- fc_remote_port_{rolechg,delete} calls
scsi_tgt_it_nexus_{create,destroy} for target drivers.

- add callbacks to notify target drivers of the nexus and tmf
operation results to fc_function_template.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:46:58 -04:00
FUJITA Tomonori 5dc2b89e12 [SCSI] add supported_mode and active_mode attributes to the host
This adds supported_mode and active_mode attributes to
/sys/class/sys_host/hostX/ for specifying the mode that a lld supports
and the currently activated mode. The output format is similar to fc
rport roles:

luce:/sys/class/scsi_host/host0$ cat supported_mode
Initiator
luce:/sys/class/scsi_host/host0$ cat active_mode
Initiator

The mode values uses bitmap since we would support dual-mode llds in
the future like this:

luce:/sys/class/scsi_host/host0$ cat supported_mode
Initiator, Target

The supported_mode attribute looks at a scsi_host_template and the
active_mode attribute looks at a scsi_host. We would add a hook to a
scsi_host_template to change the active_mode attribute
dynamically. But now there is no hook since no lld supports that
feature.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:46:55 -04:00
Christof Schmitt 03f002f778 [SCSI] scsi_transport_fc: Introduce disable_target_scan flag
This change has already been discussed on linux-scsi:
http://marc.info/?t=118771096400003
http://marc.info/?t=118760913100005

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:46:29 -04:00
FUJITA Tomonori bfb743740e [SCSI] tgt: move tsk_mgmt_response callback to transport class
This moves tsk_mgmt_response callback in struct scsi_host_template to
struct scsi_transport_template since struct scsi_transport_template is
more suitable for the task management stuff.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:38:01 -04:00
FUJITA Tomonori 17b0bcfad7 [SCSI] tgt: convert libsrp and ibmvstgt to use srp_transport
This converts libsrp and ibmvstgt to use srp transport.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:57 -04:00
FUJITA Tomonori 62fe88261b [SCSI] srp_transport: add target driver support
This adds minimum target driver support:

- srp_rport_{add,del} calls scsi_tgt_it_nexus_{create,destroy} for
target drivers.

- add a callback to notify target drivers of the nexus operation
results to srp_function_template.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:53 -04:00
FUJITA Tomonori 2c47f9efbe [SCSI] tgt: add I_T nexus support
tgt uses scsi_host as I_T nexus. This works for ibmvstgt because it
creates one scsi_host for one initiator. However, other target drivers
don't work like that.

This adds I_T nexus support, which enable one scsi_host to handle
multiple initiators. New scsi_tgt_it_nexus_create/destroy functions
are expected be called transport classes. For example, ibmvstgt
creates an initiator remote port, then the srp transport calls
tgt_it_nexus_create. tgt doesn't manages I_T nexus, instead it tells
tgtd, user-space daemon, to create a new I_T nexus.

On the receiving the response from tgtd, tgt calls
shost->transportt->it_nexus_response. transports should notify a
lld. The srp transport uses it_nexus_response callback in
srp_function_template to do that.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:50 -04:00
FUJITA Tomonori aebd5e476e [SCSI] transport_srp: add rport roles attribute
This adds a 'roles' attribute to rport like transport_fc. The role can
be initiator or target. That is, the initiator driver creates target
remote ports and the target driver creates initiator remote ports.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:46 -04:00
FUJITA Tomonori 09345f6505 [SCSI] add srp transport class
This adds srp transport class that works with ib_srp and ibmvscsi.

It creates only /sys/class/{srp_host,srp_remote_ports} and
srp_remote_ports has only "port_id" attribute.

viola:/sys/class/srp_remote_ports/port-0:1# ls
device  port_id  subsystem  uevent
viola:/sys/class/srp_remote_ports/port-0:1# cat port_id
4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:35 -04:00
Mike Christie 6724add1b5 [SCSI] libiscsi: sync up iscsi and scsi eh's access to the connection
The iscsi eh could be tearing down the session/connection while
the scsi eh is still sending task management functions. If when
we drop the session lock to grab the recv lock, the iscsi eh
tears down the connection we will oops.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:09:21 -05:00
James Bottomley 03a5743a12 [SCSI] sd: disentangle barriers in SCSI
Our current implementation has a generic set of barrier functions that
go through the SCSI driver model.  Realistically, this is unnecessary,
because the only device that can use barriers (sd) can set the flush
functions up at probe or revalidate time.  This patch pulls the barrier
functions out of the mid layer and scsi driver model and relocates them
directly in sd.

Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-04 08:37:04 -05:00
Linus Torvalds a6ce22a5f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits)
  [SCSI] mpt fusion: Changes in mptctl.c for logging support
  [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support
  [SCSI] mpt fusion: Changes in mptscsih.c for logging support
  [SCSI] mpt fusion: Changes in mptbase.c for logging support
  [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h
  [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()
  [SCSI] bsg: Fix build for CONFIG_BLOCK=n
  [SCSI] aacraid: fix Sunrise Lake reset handling
  [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking
  [SCSI] add easyRAID to the no report luns blacklist
  [SCSI] advansys: lindent and other large, uninteresting changes
  [SCSI] aic79xx, aic7xxx: Fix incorrect width setting
  [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
  [SCSI] aacraid: draw line in sand, sundry cleanup and version update
  [SCSI] iscsi_tcp: Turn off bounce buffers
  [SCSI] libiscsi: fix cmd seqeunce number checking
  [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template
  [SCSI] libiscsi: make sure session is not blocked when removing host
  [SCSI] libsas: Remove PCI dependencies
  [SCSI] simscsi: convert to use the data buffer accessors
  ...
2007-07-29 17:22:03 -07:00
Mike Christie e07264071f [SCSI] libiscsi: fix cmd seqeunce number checking
We should not be checking the cmd windown for just handling r2t responses.
And if the window closes in on us, always have scsi-ml requeue the command
from our queuecommand function.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27 09:12:05 -04:00
Jeff Garzik 1d1bbee61e [SCSI] libsas: Remove PCI dependencies
Eliminate unnecessary PCI dependencies in libsas.  It should use generic
DMA and struct device like other subsystems.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-26 09:42:43 -04:00
Jens Axboe 165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
James Bottomley b91421749a [SCSI] libsas: make ATA functions selectable by a config option
Not everyone wants libsas automatically to pull in libata.  This patch
makes the behaviour configurable, so you can build libsas with or
without ATA support.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 13:23:13 -05:00
James Bottomley b6aff66953 [SCSI] scsi_transport_sas: add destructor for bsg
There's currently no destructor for the bsg components.  If you insert
and remove the module, you see the bsg devices building up and up.  This
patch adds the destructor in the correct place in the transport class so
that the bsg and request queue are removed just before the device
destruction.

Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 12:29:07 -05:00
Kristian Høgsberg b02b6bc465 [SCSI] Make scsi_host_template::proc_name const char * instead of char *.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>

collapsed with fw-sbp2 patch "Drop cast to non-const char * in host
template initialization." from Kristian Høgsberg

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19 12:06:26 -05:00
FUJITA Tomonori ba1fc175cc [SCSI] libsas: add SAS management protocol handler
This patch adds support for SAS Management Protocol (SMP) passthrough
support via bsg. aic94xx can use this.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:18:20 -05:00
FUJITA Tomonori 7aa68e80bd [SCSI] transport_sas: add SAS management protocol support
The sas transport class attaches one bsg device to every SAS object
(host, device, expander, etc). LLDs can define a function to handle
SMP requests via sas_function_template::smp_handler.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:18:07 -05:00
James Bottomley 0f05df8b3b [SCSI] libsas, aic94xx: fix dma mapping cockups with ATA
This one was noticed by Gilbert Wu of Adaptec:

The libata core actually does the DMA mapping for you, so there has to
be an exception in the device drivers that *don't* do dma mapping for
ATA commands.  However, since we've already done this, libsas must now
dma map any ATA commands that it wishes to issue ... and yes, this is a
horrible mess.

Additionally, the test in aic94xx for ATA protocols isn't quite right.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:16:14 -05:00
Darrick J. Wong 3a2755af37 [SCSI] sas_ata: Implement sas_task_abort for ATA devices
ATA devices need special handling for sas_task_abort.  If the ATA command
came from SCSI, then we merely need to tell SCSI to abort the scsi_cmnd.
However, internal commands require a bit more work--we need to fill the qc
with the appropriate error status and complete the command, and eventually
post_internal will issue the actual ABORT TASK.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:16:03 -05:00
Darrick J. Wong 338ec57003 [SCSI] Migrate libsas ATA code into a separate file
This is a respin of my earlier patch that migrates the ATA support code
into a separate file.  For now, the controversial linking bits have
been removed per James Bottomley's request for a patch that contains
only the migration diffs, which means that libsas continues to require
libata.  I intend to address that problem in a separate patch.

This patch is against the aic94xx-sas-2.6 git tree, and it has been
sanity tested on my x206m with Seagate SATA and SAS disks without
uncovering any new problems.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:14:40 -05:00
Darrick J. Wong fa1c1e8f1e [SCSI] Add SATA support to libsas
Hook the scsi_host_template functions in libsas to delegate
functionality to libata when appropriate.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>

Misc code changes and merge fixes and update for libata->drivers/ata
move

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:12:53 -05:00
Priyanka Gupta d0f656cad3 [SCSI] Remove unused method scsi_device_cancel
Removes an obsolete method scsi_device_cancel which isn't being used
anywhere in the kernel.

Signed-off-by: Priyanka Gupta <priyankag@google.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 16:01:16 -05:00
Christof Schmitt 462b7859a0 [SCSI] zfcp: Report FCP LUN to SCSI midlayer
When reporting SCSI devices to the SCSI midlayer, use the FCP LUN as
LUN reported to the SCSI layer. With this approach, zfcp does not have
to create unique LUNS, and this code can be removed.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-19 19:51:02 -07:00
Mike Christie d8196ed218 [SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attr
iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx),
and partial offload (broadcom). To be able to allow each stack or driver
or port (virtual or physical) to be able to log into the same target portal
we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and
the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session.
This patch adds the netdev name, which is used by software iscsi when
it binds a session to a netdevice using the SO_BINDTODEVICE sock opt.
It cannot use HWADDRESS because if someone did vlans then the same netdevice
will have the same mac and the initiator,target id will not be unique.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02 15:38:04 -04:00
Mike Christie 2223696192 [SCSI] iscsi class, qla4xxx, iscsi_tcp: export local address
This patch exports the local address for the session. For
qla4xxx this is the ip of the hba's port. For software
this is the src addr of the socket.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02 15:37:19 -04:00
Mike Christie 0ab823db86 [SCSI] qla4xxx: add iscsi_transport capps for fw capacilities
Userspace will want to know what the driver/FW/HW capabilites
when it comes to some operations like if the hardware can
do discovery or if it can store iscsi info like what target
was used for boot. This patch adds some new caps so userspace
can tell if the driver supports hardware/fw based sendtargets
discovery and if the hardware has some flash which may be
holding or can contain some iscsi target info
.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02 15:36:14 -04:00
Mike Christie 1548271ece [SCSI] libiscsi: make can_queue configurable
This patch allows us to set can_queue and cmds_per_lun from userspace
when we create the session/host. From there we can set it on a per
target basis. The patch fully converts iscsi_tcp, but only hooks
up ib_iser for cmd_per_lun since it currently has a lots of preallocations
based on can_queue.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02 15:34:46 -04:00
Mike Christie 77a23c21aa [SCSI] libiscsi: fix iscsi cmdsn allocation
The cmdsn allocation and pdu transmit code can race, and we can end
up sending a pdu with cmdsn 10 before a pdu with 5. The target will
then fail the connection/session. This patch fixes the problem by
delaying the cmdsn allocation until we are about to send the pdu.

This also removes the xmitmutex. We were using the connection xmitmutex
during error handling to handle races with mtask and ctask cleanup and
completion. For ctasks we now have nice refcounting and for the mtask,
if we hit the case where the mtask timesout and it is floating
around somewhere in the driver, we end up dropping the session.
And to handle session level cleanup, we use the xmit suspend bit
along with scsi_flush_queue and the session lock to make sure
that the xmit thread is not possibly transmitting a task while
we are trying to kill it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02 15:34:14 -04:00
Mike Christie b2c6416736 [SCSI] iscsi class, iscsi_tcp, ib_iser: add sysfs chap file
The attached patches add sysfs files for the chap settings
to the iscsi transport class, iscsi_tcp and ib_iser. This is
needed for software iscsi because there are times when iscsid
can die and it will need to reread the values it was using.
And it is needed by qla4xxx for basic management opertaions.
This patch does not hook in qla4xxx yet, because I am not sure
the mbx command to use.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:58:58 -04:00
Mike Christie 857ae0bdb7 [SCSI] iscsi: Some fixes in preparation for bidirectional support - total_length
- Remove shadow of request length from struct iscsi_cmd_task.
- change all users to use scsi_cmnd->request_bufflen directly

(With bidi we will use scsi-ml API to retrieve in/out length)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:58:22 -04:00
Mike Christie d473cc7f15 [SCSI] iscsi: Some fixes in preparation for bidirectional support - exp_datasn
This patch fixes handling of expected datasn/r2tsn as received from
target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing.

. unify expected datasn/r2tsn into one counter
. calculate than check expected datasn/r2tsn. On error print a message
  and fail the request. (TODO use iscsi retransmits)
. remove the FIXME   ;)
. avoid zero length memset

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:57:17 -04:00
Mike Christie 8ad5781ae9 [SCSI] iscsi class, qla4xxx, iscsi_tcp, ib_iser: export/set initiator name
For iscsi root boot, software iscsi needs to know what the BIOS/OF
initiator used for the initiator name so this puts it in sysfs
for userspace to be able to pick up.

For hw iscsi, it is nice to see what the card is using.

This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:56:40 -04:00
Mike Christie 0801c242a3 [SCSI] libiscsi, iscsi_tcp, ib_iser : add sw iscsi host get/set params helpers
iscsid and udev need to key off the hw address being
used so add some helpers for iser and iscsi tcp.

Also convert them

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:55:23 -04:00
Mike Christie 1d9bf13a9c [SCSI] iscsi class: add iscsi host set param event
The iscsi class uses the set_param event to set session
and connection params. This patch adds a set_host_param
so we can set host level values.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:51:03 -04:00
Mike Christie 2174a04ee7 [SCSI] iscsi_transport, qla4xxx: have class lookup host for drivers
We are going to be adding more host level sysfs attrs and
set_params, so this patch has them take a scsi_host instead
of either a scsi_host or host no.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:23:12 -04:00
Mike Christie 1819dc8143 [SCSI] iscsi_transport: export hw address
Add hw address sysfs file.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01 12:02:51 -04:00
Christoph Hellwig bcd92c9fbc [SCSI] introduce shost_priv helper
Currently accessing the scsi host private data is rather messy because
it comes as an unsigned long that always needs a cast first.  This patch
introduces a helper that does the cast called shost_priv.  It's similar
in spirit to netdev_priv for network drivers.

This is the first patch introducing the macro, and the second patch
in the series will convert esp and it's subdrivers as an example.
Further conversion will wait until the helper is in the tree to make
patch juggling easier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31 17:29:25 -04:00
FUJITA Tomonori 824d7b570b [SCSI] scsi_lib: add scatter/gather data buffer accessors
This adds a set of accessors for the scsi data buffer. This is in
preparation for chaining sg lists and bidirectional requests (and
possibly, the mid-layer dma mapping).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-26 16:29:59 -05:00
James Smart 9ef3e4a452 [SCSI] fc_transport: fix sysfs deadlock on vport delete
When the vport attribute "delete" is used to delete the vport, sysfs
deadlocks waiting for the write to complete, which is waiting for the
sysfs teardown to complete. Moved this effort to a work_q element.

Took the opportunity to make some other cosmetic changes:
 - removed tabs in Doc file - replaced with expanded spaces
 - minor copyright text and author text updates
 - removed a bunch of trailing whitespace

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-26 11:47:58 -05:00
Tejun Heo 1dfcda06a6 [SCSI] kill scsi host template suspend/resume
With libata converted to use sdev->manage_start_stop for suspend and
resume, sht->suspend/resume() has no user left and low level
suspend/ressume should be taken care of by low level driver's
suspend/resume callbacks (e.g. PCI or PCMCIA driver callbacks).  This
patch removes sht->suspend/resume() callbacks.

This change is suggested by Christoph Hellwig.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22 10:41:12 -05:00
James Smart a53eb5e060 [SCSI] FC Transport support for vports based on NPIV
This patch provides support for FC virtual ports based on NPIV.
For information on the interfaces and design, please read the
Documentation/scsi/scsi_fc_transport.txt file enclosed within
the patch.

The RFC was originally posted here:
http://marc.info/?l=linux-scsi&m=117226959918393&w=2

Changes from the initial RFC:
- Bug fix: needed a transport_class_unregister() for the vport class
- Create a symlink to the vport in the shost device if it is not the
    parent of the vport.
- Made symbolic name writable so it can be set after creation
- Made the temporary fc_vport_identifiers struct private to the
transport.
- Deleted the vport_id field from the vport. I couldn't find any good
  use for it (and symname is a good replacement).
- Made the vport_state and vport_last_state "private" attributes.
  Added the fc_vport_set_state() helper function to manage state
  transitions
- Updated vport_create() to allow a vport to be created in a disabled
  state.
- Added INITIALIZING and FAILED vport states
- Added VPCERR_xxx defines for errors to be returned from vport_create()
- Created a Documentation/scsi/scsi_fc_transport.txt file that describes
  the interfaces and expected LLDD behaviors.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 09:36:15 -04:00
Christoph Hellwig d7a54e30d3 [SCSI] sas_scsi_host: Convert to use the kthread API
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06 09:33:17 -05:00
Michael Tokarev d7b8bcb0a0 [SCSI] modalias for scsi devices
The following patch adds support for sysfs/uevent modalias
attribute for scsi devices (like disks, tapes, cdroms etc),
based on whatever current sd.c, sr.c, st.c and osst.c drivers
supports.

The modalias format is like this:

 scsi:type-0x04

(for TYPE_WORM, handled by sr.c now).

Several comments.

o This hexadecimal type value is because all TYPE_XXX constants
  in include/scsi/scsi.h are given in hex, but __stringify() will
  not convert them to decimal (so it will NOT be scsi:type-4).
  Since it does not really matter in which format it is, while
  both modalias in module and modalias attribute match each other,
  I descided to go for that 0x%02x format (and added a comment in
  include/scsi/scsi.h to keep them that way), instead of changing
  them all to decimal.

o There was no .uevent routine for SCSI bus.  It might be a good
  idea to add some more ueven environment variables in there.

o osst.c driver handles tapes too, like st.c, but only SOME tapes.
  With this setup, hotplug scripts (or whatever is used by the
  user) will try to load both st and osst modules for all SCSI
  tapes found, because both modules have scsi:type-0x01 alias).
  It is not harmful, but one extra module is no good either.
  It is possible to solve this, by exporting more info in
  modalias attribute, including vendor and device identification
  strings, so that modalias becomes something like
    scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive
  and having that, match for all 3 attributes, not only device
  type.  But oh well, vendor and device strings may be large,
  and they do contain spaces and whatnot.
  So I left them for now, awaiting for comments first.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-17 18:15:04 -04:00
Tejun Heo c3c94c5a2f [SCSI] sd: implement START/STOP management
Implement SBC START/STOP management.  sdev->mange_start_stop is added.
When it's set to one, sd STOPs the device on suspend and shutdown and
STARTs it on resume.  sdev->manage_start_stop defaults is in sdev
instead of scsi_disk cdev to allow ->slave_config() override the
default configuration but is exported under scsi_disk sysfs node as
sdev->allow_restart is.

When manage_start_stop is zero (the default value), this patch doesn't
introduce any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 12:06:20 -05:00
James Bottomley 6c5f8ce1fb [SCSI] expose eh_timed_out to the host template
It looks like megaraid_sas at least needs this to throttle its commands
as they begin to time out.  The code keeps the existing transport
template use of eh_timed_out (and allows the transport to override the
host if they both have this callback).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:56:49 -05:00
James Smart c3d2350a84 [SCSI] fc_transport: update potential link speeds
This patch updates the FC transport for all speeds identified in
SM-HBA.  Note: it does not sync the "bit" definitions, as that is
actually insulated from user-space via the sysfs text string. (I could
do it, but it does introduce a potential binary-incompatibility).

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:52:04 -05:00
FUJITA Tomonori bc7e380a6a [SCSI] tgt: fix sesnse buffer problems
This patch simplify the way to notify LLDs of the command completion
and addresses the following sense buffer problems:

- can't handle both data and sense.
- forces user-space to use aligned sense buffer

tgt copies sense_data from userspace to cmnd->sense_buffer (if
necessary), maps user-space pages (if necessary) and then calls
host->transfer_response (host->transfer_data is removed).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:39:27 -05:00
Mike Christie 181011e04a [SCSI] tgt: rm bio hacks in scsi tgt
scsi tgt breaks up a command into multple scatterlists
if we cannot fit all the data in one. This was because
the block rq helpers did not support large requests and
because we can get a command of any old size so it is
hard to preallocate pages for scatterlist large enough
(we cannot really preallocate pages with the bio map
user path). In 2.6.20, we added large request support to
the block layer helper, blk_rq_map_user. And at LSF,
we talked about increasing SCSI_MAX_PHYS_SEGMENTS for
scsi tgt if we want to support really really :) large
(greater than 256 * PAGE_SIZE in the worst mapping case)
requests.

The only target currently implemented does not even support
the multiple scatterlists stuff and only supports smaller
requests, so this patch just coverts scsi tgt to use
blk_rq_map_user.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:31:33 -05:00
Mike Christie bf32ed33e9 [SCSI] iscsi: rename DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH
This patch renames DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH to avoid
confusion with the drivers default values (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH
is the iscsi RFC specific default).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:26:50 -05:00
Martin K. Petersen e73aec8247 [SCSI] sd: make printing use a common prefix
Make SCSI disk printing more consistent:

 - Define sd_printk(), sd_print_sense_hdr() and sd_print_result()

 - Move relevant header bits into sd.h

 - Remove all the legacy disk_name passing and use scsi_disk pointers
   where possible

 - Switch printk() lines to the new sd_ functions so that output is
   consistent

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:20:17 -05:00
Martin K. Petersen a4d04a4cd9 [SCSI] Make error printing more verbose
This patch enhances SCSI error printing by:

 - Making use of scsi_print_result() in the completion functions.

 - Having scmd_printk() output the disk name (when applicable).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:17:49 -05:00
Martin K. Petersen 684b7fe976 [SCSI] constants.c: cleanup, verbose result printing
Clean up constants.c and make result printing more user friendly:

 - Refactor the command and sense functions so that the actual
   formatting can be called from the various helper functions with the
   correct prefix.

 - Replace scsi_print_hostbyte() and scsi_print_driverbyte() with
   scsi_print_result() which is verbose when CONFIG_SCSI_CONSTANTS is
   on.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 11:14:02 -05:00
Linus Torvalds 5fc77247f7 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] SCSI core: better initialization for sdev->scsi_level
  [SCSI] scsi_proc.c: display sdev->scsi_level correctly
  [SCSI] megaraid_sas: update version and author info
  [SCSI] megaraid_sas: return sync cache call with success
  [SCSI] megaraid_sas: replace pci_alloc_consitent with dma_alloc_coherent in ioctl path
  [SCSI] megaraid_sas: add bios_param in scsi_host_template
  [SCSI] megaraid_sas: do not process cmds if hw_crit_error is set
  [SCSI] scsi_transport.h should include scsi_device.h
  [SCSI] aic79xx: remove extra newline from info message
  [SCSI] scsi_scan.c: handle bad inquiry responses
  [SCSI] aic94xx: tie driver to the major number of the sequencer firmware
  [SCSI] lpfc: add PCI error recovery support
  [SCSI] megaraid: pci_module_init to pci_register_driver
  [SCSI] tgt: fix the user/kernel ring buffer interface
  [SCSI] sgiwd93: interfacing to wd33c93
  [SCSI] wd33c93: Fast SCSI with WD33C93B
2007-02-19 13:32:28 -08:00
Oliver Neukum 61bf54b71d USB Storage: indistinguishable devices with broken and unbroken firmware
there's a USB mass storage device which exists in two version. One
reports the correct size and the other does not. Apart from that they
are identical and cannot be told apart. Here's a heuristic based on the
empirical finding that drives have even sizes.


Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:32:19 -08:00
Rolf Eike Beer a9b7320294 [SCSI] scsi_transport.h should include scsi_device.h
scsi_transport.h defines the inline function scsi_transport_device_data() that
dereferences a pointer of "struct scsi_device *".  Since the struct is not
known by the header this might break compilation.

Include scsi/scsi_device.h to not rely on users doing the correct magic
include order.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:14:42 -06:00
FUJITA Tomonori 930e99bd13 [SCSI] tgt: fix the user/kernel ring buffer interface
This patches fixes two bugs in the scsi target infrastructure's
user/kernel interface.

- It wrongly assumes that the ring buffer size of the interface (64KB)
is larger than or equal to the system page size. This patch sets the
ring buffer size to PAGE_SIZE if the system page size is larger.

- It uses PAGE_SIZE in the header file exported to userspace. This
patch removes it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 09:40:56 -06:00
Linus Torvalds 5f0b1437e0 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits)
  [SCSI] zfcp: removed wrong comment
  [SCSI] zfcp: use of uninitialized variable
  [SCSI] zfcp: Invalid locking order
  [SCSI] aic79xx: use dma_get_required_mask()
  [SCSI] aic79xx: fix bracket mismatch in unused macro
  [SCSI] BusLogic: Replace 'boolean' by 'bool'
  [SCSI] advansys: clean up warnings
  [SCSI] 53c7xx: brackets fix in uncompiled code
  [SCSI] nsp_cs: remove old scsi code
  [SCSI] aic79xx: make ahd_match_scb() static
  [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups
  [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled
  [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save()
  [SCSI] aic94xx: update for v28 firmware
  [SCSI] scsi_error: Fix lost EH commands
  [SCSI] aic94xx: Add default bus reset handler
  [SCSI] aic94xx: Remove TMF result code munging
  [SCSI] libsas: Add an LU reset mechanism to the error handler
  [SCSI] libsas: Don't BUG when connecting two expanders via wide port
  [SCSI] st: fix Tape dies if wrong block size used, bug 7919
  ...
2007-02-11 11:44:25 -08:00
Robert P. J. Day c376222960 [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
James Bottomley 81b7bbd193 Merge branch 'linus'
Conflicts:

	drivers/scsi/ipr.c

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-10 13:45:43 -06:00
Al Viro b437735645 [PATCH] iscsi endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:07 -08:00
Darrick J. Wong a9344e68ac [SCSI] libsas: Add an LU reset mechanism to the error handler
After discussion with andmike and dougg, it seems that the purpose of
eh_device_reset_handler is to issue LU resets, and that
eh_bus_reset_handler would be a more appropriate place for a phy reset.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03 08:15:55 -06:00
Eric Moore 502c62f17a [SCSI] spi transport class: export spi_dv_pending
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-02 20:44:25 -06:00
Darrick J. Wong ad689233be [SCSI] libsas: Handle SCSI commands that complete with failure codes
This patch moves the code that handles SAS failures out of the main EH
function and into a separate function.  It also detects commands that have
no sas_task (i.e. they completed, but with error data) and sends them into
scsi_error for processing.  This allows us to handle SCSI errors (and
enables auto-spinup as a side effect) instead of dropping them on the
floor and falling into an infinite loop.  It also requires the
implementation of a device reset function, which the SAS failure code has
been modified to employ for REQ_DEVICE_RESET.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27 10:06:51 -06:00
Darrick J. Wong 6f63caae21 [SCSI] libsas: Clean up discovery failure handler code
sas_rphy_delete does two things: it removes the sas_rphy from the transport
layer and frees the sas_rphy.  This can be broken down into two functions,
sas_rphy_remove and sas_rphy_free; sas_rphy_remove is of interest to
sas_discover_root_expander because it calls functions that require
sas_rphy_add as a prerequisite and can fail (namely sas_discover_expander).
In that case, sas_discover_root_expander needs to be able to undo the effects
of sas_rphy_add yet leave the job of freeing the sas_rphy to the caller of
sas_discover_root_expander.

This patch also removes some unnecessary code from sas_discover_end_dev
to eliminate an unnecessary cycle of sas_notify_lldd_gone/found for SAS
devices, thus eliminating a sas_rphy_remove call (and fixing a race condition
where a SCSI target scan can come in between the gone and found call).
It also moves the sas_rphy_free calls into sas_discover_domain and
sas_ex_discover_end_dev to complement the sas_rphy_allocation via
sas_get_port_device.

This patch does not change the semantics of sas_rphy_delete.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27 10:05:15 -06:00
Darrick J. Wong 6b0efb8516 [SCSI] libsas: Add SAS_HA state flags to avoid queueing events while unloading
Track sas_ha_struct state so that we ignore events that come in while
we're shutting things down.

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:21:53 -06:00
Darrick J. Wong 396819fba8 [SCSI] libsas: Delay issuing ABORT TASK TMF until the error handler
sas_task_abort() should simply abort the upper-level SCSI command and wait
until the error handler to send the actual ABORT TASK command.  By
deferring things to the EH we simplify the concurrency coordination and
eliminate some race conditions.  Note that sas_task_abort has a few hooks
to handle libsas internal commands properly too.

Also rename do_sas_task_abort to __sas_task_abort just in case we really
want to abort the task *right now* and we don't have a scsi_cmnd attached
to the command.  This is a hook for libata internal commands to abort.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:18:06 -06:00
Darrick J. Wong 3ebf6922b0 [SCSI] libsas: Enable the EH strategy handler to reset a phy after a command
When a SAS LLDD needs to request a device port reset, it needs to have all
commands aborted before it can reset the port.  Since commands are put on
the EH's list in the order that they were queued, the LLDD can set a "need
reset" flag in the last task to be aborted so that the EH can reset the
port after all commands are aborted.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:17:27 -06:00
Darrick J. Wong 37958fb040 [SCSI] libsas: Remove SAS_TASK_INITIATOR_ABORTED flag
This flag is no longer necessary because we push tasks to be aborted into
the EH as soon as we possibly can, and let the SCSI EH code take care of
the coordination for which this flag was used.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:17:04 -06:00
Darrick J. Wong acbf167d4a [SCSI] libsas: Add a sysfs knob to enable/disable a phy
This patch lets a user arbitrarily enable or disable a phy via sysfs.
Potential applications include shutting down a phy to replace one
lane of wide port, and (more importantly) providing a method for the
libata SATL to control the phy.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:13:00 -06:00
Darrick J. Wong b218a0d8e2 [SCSI] libsas: Don't give scsi_cmnds to the EH if they never made it to the SAS LLDD or have already returned
On a system with many SAS targets, it appears possible that a scsi_cmnd
can time out without ever making it to the SAS LLDD or at the same time
that a completion is occurring.  In both of these cases, telling the
LLDD to abort the sas_task makes no sense because the LLDD won't know
about the sas_task; what we really want to do is to increase the timer.
Note that this involves creating another sas_task bit to indicate
whether or not the task has been sent to the LLDD; I could have
implemented this by slightly redefining SAS_TASK_STATE_PENDING, but
this way seems cleaner.

This second version amends the aic94xx portion to set the
TASK_AT_INITIATOR flag for all sas_tasks that were passed to
lldd_execute_task.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 16:12:39 -06:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
David Howells 06328b4f79 Actually update the fixed up compile failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-06 15:02:26 +00:00
David Howells 4796b71fbb Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/pcmcia/ds.c

Fix up merge failures with Linus's head and fix new compile failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-06 15:01:18 +00:00
Linus Torvalds ec0bf39a47 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits)
  [SCSI] aic79xx: Add ASC-29320LPE ids to driver
  [SCSI] stex: version update
  [SCSI] stex: change wait loop code
  [SCSI] stex: add new device type support
  [SCSI] stex: update device id info
  [SCSI] stex: adjust default queue length
  [SCSI] stex: add value check in hard reset routine
  [SCSI] stex: fix controller_info command handling
  [SCSI] stex: fix biosparam calculation
  [SCSI] megaraid: fix MMIO casts
  [SCSI] tgt: fix undefined flush_dcache_page() problem
  [SCSI] libsas: better error handling in sas_expander.c
  [SCSI] lpfc 8.1.11 : Change version number to 8.1.11
  [SCSI] lpfc 8.1.11 : Misc Fixes
  [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable
  [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id
  [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support
  [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging
  [SCSI] lpfc 8.1.11 : Fix Memory leaks
  [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support
  ...
2006-12-05 16:09:46 -08:00
David Howells 9db7372445 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 17:01:28 +00:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Al Viro f6a570333e [PATCH] severing module.h->sched.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:22 -05:00
FUJITA Tomonori 26b1482344 [SCSI] scsi tgt: SCSI RDMA Protocol library functions
libsrp provides helper functions for SRP target drivers.

Some SRP target drivers would be out of drivers/scsi/ so we added an
entry for libsrp in drivers/scsi/Kconfig.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03 09:27:33 -06:00
Dave Jones 4195bdbea4 [PATCH] add missing libsas include to fix s390 compilation.
include/scsi/libsas.h:479: error: field 'smp_req' has incomplete type
include/scsi/libsas.h:480: error: field 'smp_resp' has incomplete type

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-28 17:26:50 -08:00
FUJITA Tomonori 97f78759ea [SCSI] scsi tgt: scsi target user and kernel communication interface
The user-space daemon and tgt kernel module need bi-directional
kernel/user high-performance interface, however, mainline provides no
standard interface like that.

This patch adds shared memory interface between kernel and user spaces
like some other drivers do by using own character device. The
user-space daemon and tgt kernel module creates shared memory via mmap
and use it like ring buffer. poll (kernel to user) and write (user to
kernel) system calls are used for notification.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25 13:17:38 -06:00
FUJITA Tomonori 5a55c2596f [SCSI] scsi tgt: scsi target lib functionality
The core scsi target lib functions.

TODO:
- mv md/dm-bio-list.h to linux/bio-list.h so md and us do not have to
do that weird include.
- convert scsi_tgt_cmd's work struct to James's execute code. And try
to kill our scsi_tgt_cmd.
- add host state checking. We do refcouting so hotplug is partially
supported, but we need to add state checking to make it easier on
the LLD.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25 13:17:18 -06:00
FUJITA Tomonori b58d91547f [SCSI] export scsi-ml functions needed by tgt_scsi_lib and its LLDs
This patch contains the needed changes to the scsi-ml for the target
mode support.

Note, per the last review we moved almost all the fields we added
to the scsi_cmnd to our internal data structure which we are going
to try and kill off when we can replace it with support from other
parts of the kernel.

The one field we left on was the offset variable. This is needed to handle
the case where the target gets request that is so large that it cannot
execute it in one dma operation. So max_secotors or a segment limit may
limit the size of the transfer. In this case our tgt core code will
break up the command into managable transfers and send them to the
LLD one at a time. The offset is then used to tell the LLD where in
the command we are at. Is there another field on the scsi_cmd for
that?

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25 13:08:56 -06:00
Matthew Wilcox 1aa8fab2ac [SCSI] Make scsi_scan_host work for drivers which find their own targets
If a driver can find its own targets, it can now fill in scan_finished and
(optionally) scan_start in the scsi_host_template.  Then, when it calls
scsi_scan_host(), it will be called back (from a thread if asynchronous
discovery is enabled), first to start the scan, and then at intervals to
check if the scan is completed.

Also make scsi_prep_async_scan and scsi_finish_async_scan static.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 16:42:42 -06:00
James Bottomley 0bd2af4683 Merge ../scsi-rc-fixes-2.6 2006-11-22 12:06:44 -06:00
Darrick J. Wong dea2221479 [PATCH] aic94xx: handle REQ_DEVICE_RESET
This patch implements a REQ_DEVICE_RESET handler for the aic94xx
driver.  Like the earlier REQ_TASK_ABORT patch, this patch defers the
device reset to the Scsi_Host's workqueue, which has the added benefit
of ensuring that the device reset does not happen at the same time
that the abort tmfs are being processed.  After the phy reset, the
busted drive should go away and be re-detected later, which is indeed
what I've seen on both a x260 and a x206m.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 11:05:59 -06:00
David Howells c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Christoph Hellwig 4f777ed260 [SCSI] kill scsi_assign_lock
scsi_assign_lock has been unused for a long time and is a bad idea
in general, so kill it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15 14:14:46 -06:00
Darrick J. Wong 79a5eb609b [SCSI] libsas: add sas_abort_task
This patch adds an external function, sas_abort_task, to enable LLDDs
to abort sas_tasks.  It also adds a work_struct so that the actual
work of aborting a task can be shifted from tasklet context (in the
LLDD) onto the scsi_host's workqueue.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15 12:27:50 -06:00
Darrick J. Wong f456393e19 [SCSI] libsas: modify error handler to use scsi_eh_* functions
This patch adds an EH done queue to sas_ha, converts the error handling
strategy function and the sas_scsi_task_done functions in libsas to use
the scsi_eh_* commands for error'd commands, and adds checks for the
INITIATOR_ABORTED flag so that we do the right thing if a sas_task has
been aborted by the initiator.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15 12:14:16 -06:00
FUJITA Tomonori 4a531e8c79 [SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user space
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:34 -07:00
Hannes Reinecke 5a09e39810 [SCSI] scsi_debug: support REPORT TARGET PORT GROUPS
This patch adds support for REPORT TARGET PORT GROUPS. This is used
eg for the multipathing priority callout to determine the path
priority.
With this patch multipath-tools can use the existing mpath_prio_alua
callout to exercise the path priority grouping.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:13 -07:00
Mike Christie 9864404791 [SCSI] libiscsi: fix oops in connection create failure path
If connection creation fails we end up calling list_del
on a invalid struct. This then causes an oops. We are not
acutally using the lists (old MCS code we thought might
be useful elsewhere) so this patch just removes that
code.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:53 -07:00
Mike Christie 43a145a344 [SCSI] iscsi class: fix slab corruption during restart
The transport class recv mempools are causing slab corruption.
We could hack around netlink's lack of mempool support like dm,
but it is just too ulgy (dm's hack is ugly enough :) when you need
to support broadcast.

This patch removes the recv pools. We have not used them even when
we were allocting 20 MB per session and the system only had 64 MBs.
And we have no pools on the send side and have been ok there. When
Peter's work gets merged we can use that since the network guys
are in favor of that approach and are not going to add mempools
everywhere.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:48 -07:00
Matthew Wilcox 3e082a910d [SCSI] Add ability to scan scsi busses asynchronously
Since it often takes around 20-30 seconds to scan a scsi bus, it's
highly advantageous to do this in parallel with other things.  The bulk
of this patch is ensuring that devices don't change numbering, and that
all devices are discovered prior to trying to start init.  For those
who build SCSI as modules, there's a new scsi_wait_scan module that will
ensure all bus scans are finished.

This patch only handles drivers which call scsi_scan_host.  Fibre Channel,
SAS, SATA, USB and Firewire all need additional work.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-11 13:44:25 -05:00
Linus Torvalds 97d41e90fe Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...
2006-10-04 18:57:35 -07:00
David C Somayajulu f583f4924d [PATCH] helper function for retrieving scsi_cmd given host based block layer tag
This was necessitated by the need for a function to get back
to a scsi_cmnd, when an hba the posts its (corresponding) completion
interrupt with a block layer tag as its reference.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-10-04 19:32:09 +02:00
Andrew Morton cb5d9e0948 [PATCH] scsi: device_reprobe() can fail
device_reprobe() should return an error code.  When it does so,
scsi_device_reprobe() should propagate it back.

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 19:33:43 -07:00
David Howells 9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Jens Axboe 4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Andrew Morton 8350a348e9 [SCSI] scsi: device_reprobe() can fail
device_reprobe() should return an error code.  When it does so,
scsi_device_reprobe() should propagate it back.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-27 12:26:58 -07:00
Douglas Gilbert 6460e75a10 [SCSI] sg: fixes for large page_size
This sg driver patch addresses the problem with larger
page sizes reported by Brian King in this post:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115867718623631&w=2
Some other related matters are also addressed. Some of these
prevent oopses when the SG_SCATTER_SZ or scatter_elem_sz are
set to inappropriate values.

The scatter_elem_sz has been tested up to 4 MB which should
make the largest data transfer with one SCSI command, 32 MB
less one block, achievable with a relatively small number
of elements in the scatter gather list.

ChangeLog:
    - add scatter_elem_sz boot time parameter and sysfs module
      parameter that is initialized to SG_SCATTER_SZ
    - the driver will then adjust scatter_elem_sz to be the
      max(given(scatter_elem_sz), PAGE_SIZE)
      It will also round it up, if necessary, to be a power
      of two
    - clean up sg.h header, correct bad urls and some statements
      that are no longer valid
    - make the def_reserved_size sysfs module attribute writable

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26 09:23:15 -07:00
Al Viro 3cc27547d6 [PATCH] SCSI gfp_t annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 20:07:49 -07:00
James Bottomley dfdc58ba35 [SCSI] SPI transport class: misc DV fixes
Key more of the domain validation settings off the inquiry data from
the disk (in particular, don't try IU or DT unless the disk claims to
support them.

Also add a new dv_in_progress flag to prevent recursive DV.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:53:53 -05:00
James Bottomley c9802cd957 Merge mulgrave-w:git/scsi-misc-2.6
Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 15:33:43 -05:00
David Woodhouse fadcfa33b6 [HEADERS] One line per header in Kbuild files to reduce conflicts
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-19 12:43:58 +01:00
James Bottomley a01e70e570 [SCSI] aci94xx: implement link rate setting
This patch implements the ability to set the minimum and maximum
linkrates for both libsas (for expanders) and aic94xx (for the host
phys).  It also tidies up the setting of the hardware min and max to
make sure they're updated when the expander emits a change broadcast.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:20:23 -05:00
James Bottomley d24e1eeb3a [SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantities
According to SPEC, the minimum_linkrate and maximum_linkrate should be
settable by the user.  This patch introduces a callback that allows the
sas class to pass these settings on to the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:16:44 -05:00
James Bottomley 88edf74610 [SCSI] SAS: consolidate linkspeed definitions
At the moment we have two separate linkspeed enumerations covering
roughly the same values.  This patch consolidates on a single one enum
sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the
aic94xx driver.  Eventually I'll get around to removing the duplicated
fields in asd_sas_phy and sas_phy ...

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 12:41:16 -05:00
James Smart 0f29b966d6 [SCSI] FC transport: Add dev_loss_tmo callbacks, and new fast_io_fail_tmo w/ callback
This patch adds the following functionality to the FC transport:

- dev_loss_tmo LLDD callback :
  Called to essentially confirm the deletion of an rport. Thus, it is
  called whenever the dev_loss_tmo fires, or when the rport is deleted
  due to other circumstances (module unload, etc).  It is expected that
  the callback will initiate the termination of any outstanding i/o on
  the rport.

- fast_io_fail_tmo and LLD callback:
  There are some cases where it may take a long while to truly determine
  device loss, but the system is in a multipathing configuration that if
  the i/o was failed quickly (faster than dev_loss_tmo), it could be
  redirected to a different path and completed sooner.

Many thanks to Mike Reed who cleaned up the initial RFC in support
of this post.

The original RFC is at:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04 21:22:05 -05:00
James Smart f14e2e29cd [SCSI] SCSI & FC transport: extend event vendor id's to 64bits
During discussions with Mike Christie, I became convinced that we needed
a larger vendor id. This patch extends the id from 32 to 64 bits.

This applies on top of the prior patches that add SCSI transport events
via netlink.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:35:15 -05:00
James Smart 84314fd474 [SCSI] SCSI and FC Transport: add netlink support for posting of transport events
This patch formally adds support for the posting of FC events via netlink.
It is a followup to the original RFC at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2
and the initial posting at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2

The patch has been updated to optimize the send path, per the discussions
in the initial posting.

Per discussions at the Storage Summit and at OLS, we are to use netlink for
async events from transports. Also per discussions, to avoid a netlink
protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol,
which can then be used by all transports.

This patch:
- Creates new files scsi_netlink.c and scsi_netlink.h, which contains the
  single and shared definitions for the SCSI Transport. It is tied into the
  base SCSI subsystem intialization.
  Contains a single interface routine, scsi_send_transport_event(), for a
  transport to send an event (via multicast to a protocol specific group).
- Creates a new scsi_netlink_fc.h file, which contains the FC netlink event
  messages
- Adds 3 new routines to the fc transport:
   fc_get_event_number() -  to get a FC event #
   fc_host_post_event()  -  to send a simple FC event (32 bits of data)
   fc_host_post_vendor_event() - to send a Vendor unique event, with
                                 arbitrary amounts of data.

   Note: the separation of event number allows for a LLD to send a standard
     event, followed by vendor-specific data for the event.

Note: This patch assumes 2 prior fc transport patches have been installed:
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2

   Sorry - next time I'll do something like making these individual
   patches of the same posting when I know they'll be posted closely
   together.

Signed-off-by: James Smart <James.Smart@emulex.com>

Tidy up configuration not to make SCSI always select NET

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:33:49 -05:00
James Bottomley deb81d80ba [SCSI] add failure return to scsi_init_shared_tag_map()
And use it in the stex driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:57:28 -05:00
Mike Christie 60ecebf5a1 [SCSI] add refcouting around ctask usage in main IO patch
It is possible that a ctask could be completing and getting
cleaned up at the same time, we are finishing up the last
data transfer. This could then result in the data transfer
code using stale or invalid values. This patch adds a refcount
to the ctask. When the count goes to zero then we know the
transmit thread and recv thread or softirq are not touching
it and we can safely release it.

The eh should not need to grab a reference because it only cleans
up a task if it has both the xmit mutex and recv lock (or recv
side suspended).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:07 -05:00
Mike Christie ffd0436ed2 [SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.
iSCSI RFC states that the first burst length must be smaller than the
max burst length. We currently assume targets will be good, but that may
not be the case, so this patch adds a check.

This patch also moves the unsol data out offset to the lib so the LLDs
do not have to track it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:04 -05:00
James Bottomley 86e33a296c [SCSI] add shared tag map helpers
This patch adds support for sharing tag maps at the host level
(i.e. either every queue [LUN] has its own tag map or there's a single
one for the entire host).  This formulation is primarily intended to
help single issue queue hardware, like the aic7xxx

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-31 11:18:03 -04:00
James Bottomley 2908d778ab [SCSI] aic94xx: new driver
This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 09:52:29 -05:00
James Bottomley f4ad7b5807 [SCSI] scsi_transport_sas: remove local_attached flag
This flag denotes local attachment of the phy.  There are two problems
with it:

1) It's actually redundant ... you can get the same information simply
by seeing whether a host is the phys parent
2) we condition a lot of phy parameters on it on the false assumption
that we can only control local phys.  I'm wiring up phy resets in the
aic94xx now, and it will be able to reset non-local phys as well.

I fixed 2) by moving the local check into the reset and stats function
of the mptsas, since that seems to be the only HBA that can't
(currently) control non-local phys.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27 22:30:11 -05:00
James Bottomley 8ce7a9c159 Merge ../linux-2.6 2006-08-27 21:59:59 -05:00
James Smart b8d0821012 [SCSI] fc transport: add fc_host system_hostname attribute and u64_to_wwn()
This patch updates the fc transport for the following:

- Addition of a new attribute "system_hostname" which can be
  used to set the fully qualified hostname that the fc_host
  is attached to. The fc_host can then register this string
  as the FDMI-based host name attribute.
  Note: for NPIV, a fc_host could be associated with a system which
    is not the local system.

- Add the inline function u64_to_wwn(), which is the inverse of the
  existing wwn_to_u64() function.

- Slight reorg, just to keep dynamic attributes with each other, etc

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:43:10 -07:00
James Smart 016131b8ff [SCSI] fc transport: convert fc_host symbolic_name attribute to a dynamic attribute
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:40:07 -07:00
Matthew Wilcox 4ff36718ed [SCSI] Improve inquiry printing
- Replace scsi_device_types array API with scsi_device_type function API.
   Gets rid of a lot of common code, as well as being easier to use.
 - Add the new device types in SPC4 r05a, and rename some of the older ones.
 - Reformat the printing of inquiry data; now fits on one line and
   includes PQ.

I think I've addressed all the feedback from the previous versions.  My
current test box prints:

scsi 2:0:1:0: Direct access     HP 18.2G ATLAS10K3_18_SCA HP05 PQ: 0 ANSI: 2

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:59:26 -05:00
Christoph Hellwig 9e5c50fa86 [SCSI] remove SCSI_STATE_ #defines
These aren't used anymore since the field in scsi_cmnd where it was
stored has been removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:35:39 -05:00
Mike Christie c8dc1e523b [SCSI] iscsi bugfixes: reduce memory allocations
We currently try to allocate a max_recv_data_segment_length
which can be very large (default is 64K), and common uses
are up to 1MB. It is very very difficult to allocte this
much contiguous memory and it turns out we never even use it.
We really only need a couple of pages, so this patch has us
allocates just what we know what we need today.

Later if vendors start adding vendor specific data and
we need to handle large buffers we can do this, but for
the last 4 years we have not seen anyone do this or request
it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:49:34 -05:00
Mike Christie 1c83469d36 [SCSI] iscsi bugfixes: fix oops when iser is flushing io
When we enter recovery and flush the running commands
we cannot freee the connection before flushing the commands.
Some commands may have a reference to the connection
that needs to be released before. iscsi_stop was forcing
the term and suspend too early and was causing a oops
in iser, so this patch removes those callbacks all together
and allows the LLD to handle that detail.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:48:32 -05:00