Commit Graph

29 Commits

Author SHA1 Message Date
Michal Simek 6bd55f0bba microblaze: Fix coding style issues
Fix coding style issues reported by checkpatch.pl.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2013-02-12 11:24:45 +01:00
Michal Simek 4336bac52b microblaze: Remove BIP from childregs
Not necessary to use BIP for protection.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-12-13 14:38:52 +01:00
Al Viro afa86fc426 flagday: don't pass regs to copy_thread()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28 23:43:42 -05:00
Al Viro f3268edbe6 microblaze: switch to generic fork/vfork/clone
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-28 22:43:40 -05:00
Al Viro 99c59f60fd microblaze: switch to generic kernel_execve()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16 08:45:47 +01:00
Al Viro 2319295dd8 microblaze: switch to generic kernel_thread()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16 08:44:57 +01:00
Edgar E. Iglesias d5c15f1784 microblaze: Setup correct pointer to TLS area
Setup a pointer to the TLS area in copy_thread.
r10 is 6th argumetn which contains TLS area.
And r21 is the thread reg.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-05-25 06:41:18 +02:00
David Howells c40d04df15 Disintegrate asm/system.h for Microblaze
Disintegrate asm/system.h for Microblaze.  Not compiled.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: microblaze-uclinux@itee.uq.edu.au
2012-03-28 18:30:02 +01:00
Thomas Gleixner bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
Frederic Weisbecker 1268fbc746 nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()
Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:57 -08:00
Frederic Weisbecker 2bbb6817c0 nohz: Allow rcu extended quiescent state handling seperately from tick stop
It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:36 -08:00
Frederic Weisbecker 280f06774a nohz: Separate out irq exit and idle loop dyntick logic
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:35 -08:00
Peter Zijlstra 84ac218f02 microblaze: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW usage
As far as I can tell the only reason microblaze has
__ARCH_WANT_INTERRUPTS_ON_CTXSW is because it initializes new task state
with interrupts enabled so that on switch_to() interrupts get enabled.

So change copy_thread() to clear MSR_IE instead of set it, this will
ensure switch_to() will always keep IRQs disabled.

The scheduler will disable IRQs when taking rq->lock in schedule() and
enable IRQs in finish_lock_switch() after its done its magic.

This leaves ARM the only __ARCH_WANT_INTERRUPTS_ON_CTXSW user.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14 12:28:42 +02:00
Mathias Krause a0ec99bda8 microblaze: exec: Remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
2011-07-25 09:07:45 +02:00
Michal Simek 6e83557c38 microblaze: Remove r0_ram pointer and PTO alignment
r0_ram pool was used for saving/restoring register
content if hw exception happen. This poll was replaced by
pt_pool_space with PT_SIZE size.
Based on this change SAVE_STATE_ARG_SPACE was removed which
caused that PTO offset is zero that's why is also removed.

r0_ram space was used as scratchpad by v850. In early
Microblaze Linux developing phase was this part of code
blindly copied.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09 08:09:54 +01:00
Michal Simek d0f140e03e microblaze: Do not trace cpu_relax function
IRQsoff tracer requires to protect cpu_idle function
to get correct timing report.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:36 +02:00
Michal Simek 78ebfa884b microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely
macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 40db083433 microblaze: Remove segment.h
I would like to use asm-generic uaccess.h where are segment
macros defined. This is just first step.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Michal Simek a1f55113ca microblaze: Move cache macro from cache.h to cacheflush.h
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:00 +01:00
Michal Simek f1ae3f6918 microblaze: UMS is used only for MMU kernel
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05 11:37:47 +02:00
John Williams 866d72295d microblaze: Ensure CPU usermode is set on new userspace processes
Signed-off-by: John Williams <john.williams@petalogix.com>
2009-09-22 10:00:41 +02:00
Michal Simek 5233806dfe microblaze_mmu_v2: Update process creation for MMU
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26 16:45:18 +02:00
Arnd Bergmann 5af7fa6810 microblaze: export some symbols
Some device drivers require the symbols _ebss, kernel_thread,
__page_offset or ___range_ok, so export them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21 15:56:05 +02:00
Michal Simek 6714fcc34e microblaze: Remove redundant variable
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek e1c4bd0897 microblaze: Move start_thread to process.c
This change is due to upcomming MMU merge

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek ac3efab506 microblaze: Rename kernel_mode to pt_mode in pt_regs
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek 51eb6dc9ca microblaze: Remove while(1) loop from show_regs function
I removed it because of show_regs can't break die function.
If process/kernel failed, die (do_exit) function resolve it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:16 +02:00
Michal Simek a8fb748e89 microblaze: Simplify copy_thread()
Removing nr parameter from copy_tread function
commit 6f2c55b843

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-14 10:37:22 +02:00
Michal Simek 6496a23add microblaze_v8: process and init task function
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 14:25:26 +01:00