Commit Graph

34 Commits

Author SHA1 Message Date
Miklos Szeredi 8aa09a50b5 [fuse] fix race between checking and setting file->private_data
BKL does not protect against races if the task may sleep between
checking and setting a value.  So move checking of file->private_data
near to setting it in fuse_fill_super().

Found by Al Viro.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
2006-04-26 10:49:16 +02:00
Miklos Szeredi 5a5fb1ea74 Revert "[fuse] fix deadlock between fuse_put_super() and request_end()"
This reverts 73ce8355c2 commit.

It was wrong, because it didn't take into account the requirement,
that iput() for background requests must be performed synchronously
with ->put_super(), otherwise active inodes may remain after unmount.

The right solution is to keep the sbput_sem and perform iput() within
the locked region, but move fput() outside sbput_sem.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
2006-04-26 10:48:55 +02:00
Miklos Szeredi 73ce8355c2 [fuse] fix deadlock between fuse_put_super() and request_end()
A deadlock was possible, when the last reference to the superblock was
held due to a background request containing a file reference.

Releasing the file would release the vfsmount which in turn would
release the superblock.  Since sbput_sem is held during the fput() and
fuse_put_super() tries to acquire this same semaphore, a deadlock
results.

The chosen soltuion is to get rid of sbput_sem, and instead use the
spinlock to ensure the referenced inodes/file are released only once.
Since the actual release may sleep, defer these outside the locked
region, but using local variables instead of the structure members.

This is a much more rubust solution.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
2006-04-11 21:14:26 +02:00
Miklos Szeredi 08a53cdce6 [PATCH] fuse: account background requests
The previous patch removed limiting the number of outstanding requests.  This
patch adds a much simpler limiting, that is also compatible with file locking
operations.

A task may have at most one synchronous request allocated.  So these requests
need not be otherwise limited.

However the number of background requests (release, forget, asynchronous
reads, interrupted requests) can grow indefinitely.  This can be used by a
malicous user to cause FUSE to allocate arbitrary amounts of unswappable
kernel memory, denying service.

For this reason add a limit for the number of background requests, and block
allocations of new requests until the number goes bellow the limit.

Also use this mechanism to block all requests until the INIT reply is
received.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:49 -07:00
Miklos Szeredi ce1d5a491f [PATCH] fuse: clean up request accounting
FUSE allocated most requests from a fixed size pool filled at mount time.
However in some cases (release/forget) non-pool requests were used.  File
locking operations aren't well served by the request pool, since they may
block indefinetly thus exhausting the pool.

This patch removes the request pool and always allocates requests on demand.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:49 -07:00
Miklos Szeredi d713311464 [PATCH] fuse: use a per-mount spinlock
Remove the global spinlock in favor of a per-mount one.

This patch is basically find & replace.  The difficult part has already been
done by the previous patch.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:48 -07:00
Miklos Szeredi 0720b31597 [PATCH] fuse: simplify locking
This is in preparation for removing the global spinlock in favor of a
per-mount one.

The only critical part is the interaction between fuse_dev_release() and
fuse_fill_super(): fuse_dev_release() must see the assignment to
file->private_data, otherwise it will leak the reference to fuse_conn.

This is ensured by the fput() operation, which will synchronize the assignment
with other CPU's that may do a final fput() soon after this.

Also redundant locking is removed from fuse_fill_super(), where exclusion is
already ensured by the BKL held for this function by the VFS.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:48 -07:00
Jeff Dike 385a17bfc3 [PATCH] fuse: add O_ASYNC support to FUSE device
This adds asynchronous notification to FUSE - a FUSE server can request
O_ASYNC on a /dev/fuse file descriptor and receive SIGIO when there is input
available.

One subtlety - fuse_dev_fasync, which is called when O_ASYNC is requested,
does no locking, unlink the other methods.  I think it's unnecessary, as the
fuse_conn.fasync list is manipulated only by fasync_helper and kill_fasync,
which provide their own locking.  It would also be wrong to use the fuse_lock,
as it's a spin lock and fasync_helper can sleep.  My one concern with this is
the fuse_conn going away underneath fuse_dev_fasync - sys_fcntl takes a
reference on the file struct, so this seems not to be a problem.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:48 -07:00
Miklos Szeredi 9cd6845511 [PATCH] fuse: fix async read for legacy filesystems
While asynchronous reads mean a performance improvement in most cases, if
the filesystem assumed that reads are synchronous, then async reads may
degrade performance (filesystem may receive reads out of order, which can
confuse it's own readahead logic).

With sshfs a 1.5 to 4 times slowdown can be measured.

There's also a need for userspace filesystems to know whether asynchronous
reads are supported by the kernel or not.

To achive these, negotiate in the INIT request whether async reads will be
used and the maximum readahead value.  Update interface version to 7.6

If userspace uses a version earlier than 7.6, then disable async reads, and
set maximum readahead value to the maximum read size, as done in previous
versions.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:09 -08:00
Miklos Szeredi 095da6cbb6 [PATCH] fuse: fix bitfield race
Fix race in setting bitfields of fuse_conn.  Spotted by Andrew Morton.

The two fields ->connected and ->mounted were always changed with the
fuse_lock held.  But other bitfields in the same structure were changed
without the lock.  In theory this could lead to losing the assignment of
even the ones under lock.  The chosen solution is to change these two
fields to be a full unsigned type.  The other bitfields aren't "important"
enough to warrant the extra complexity of full locking or changing them to
bitops.

For all bitfields document why they are safe wrt. concurrent
assignments.

Also make the initialization of the 'num_waiting' atomic counter explicit.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:31 -08:00
Miklos Szeredi 9b9a04693f [PATCH] fuse: move INIT handling to inode.c
Now the INIT requests can be completely handled in inode.c and the
fuse_send_init() function need not be global any more.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:31 -08:00
Miklos Szeredi 69a53bf267 [PATCH] fuse: add connection aborting
Add ability to abort a filesystem connection.

With the introduction of asynchronous reads, the ability to interrupt any
request is not enough to dissolve deadlocks, since now waiting for the request
completion (page unlocked) is independent of the actual request, so in a
deadlock all threads will be uninterruptible.

The solution is to make it possible to abort all requests, even those
currently undergoing I/O to/from userspace.  The natural interface for this is
'mount -f mountpoint', but that only works as long as the filesystem is
attached.  So also add an 'abort' attribute to the sysfs view of the
connection.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi 0cd5b88553 [PATCH] fuse: add number of waiting requests attribute
This patch adds the 'waiting' attribute which indicates how many filesystem
requests are currently waiting to be completed.  A non-zero value without any
filesystem activity indicates a hung or deadlocked filesystem.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi f543f253f3 [PATCH] fuse: make fuse connection a kobject
Kobjectify fuse_conn, and make it visible under /sys/fs/fuse/connections.

Lacking any natural naming, connections are numbered.

This patch doesn't add any attributes, just the infrastructure.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi 9ba7cbba10 [PATCH] fuse: extend semantics of connected flag
The ->connected flag for a fuse_conn object previously only indicated whether
the device file for this connection is currently open or not.

Change it's meaning so that it indicates whether the connection is active or
not: now either umount or device release will clear the flag.

The separate ->mounted flag is still needed for handling background requests.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi d77a1d5b61 [PATCH] fuse: introduce list for requests under I/O
Create a new list for requests in the process of being transfered to/from
userspace.  This will be needed to be able to abort all requests even those
currently under I/O

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi 6383bdaa2e [PATCH] fuse: miscellaneous cleanup
- remove some unneeded assignments

 - use kzalloc instead of kmalloc + memset

 - simplify setting sb->s_fs_info

 - in fuse_send_init() use fuse_get_request() instead of
   do_get_request() helper

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:30 -08:00
Miklos Szeredi 39ee059aff [PATCH] fuse: check file type in lookup
Previously invalid types were quietly changed to regular files, but at
revalidation the inode was changed to bad.  This was rather inconsistent
behavior.

Now check if the type is valid on initial lookup, and return -EIO if not.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:56 -08:00
Miklos Szeredi 3ec870d524 [PATCH] fuse: make maximum write data configurable
Make the maximum size of write data configurable by the filesystem.  The
previous fixed 4096 limit only worked on architectures where the page size is
less or equal to this.  This change make writing work on other architectures
too, and also lets the filesystem receive bigger write requests in direct_io
mode.

Normal writes which go through the page cache are still limited to a page
sized chunk per request.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:56 -08:00
Miklos Szeredi 1d3d752b47 [PATCH] fuse: clean up request size limit checking
Change the way a too large request is handled.  Until now in this case the
device read returned -EINVAL and the operation returned -EIO.

Make it more flexibible by not returning -EINVAL from the read, but restarting
it instead.

Also remove the fixed limit on setxattr data and let the filesystem provide as
large a read buffer as it needs to handle the extended attribute data.

The symbolic link length is already checked by VFS to be less than PATH_MAX,
so the extra check against FUSE_SYMLINK_MAX is not needed.

The check in fuse_create_open() against FUSE_NAME_MAX is not needed, since the
dentry has already been looked up, and hence the name already checked.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:56 -08:00
Miklos Szeredi de5f120255 [PATCH] fuse: add frsize to statfs reply
Add 'frsize' member to the statfs reply.

I'm not sure if sending f_fsid will ever be needed, but just in case leave
some space at the end of the structure, so less compatibility mess would be
required.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:55 -08:00
Miklos Szeredi 7c352bdf04 [PATCH] FUSE: don't allow restarting of system calls
This patch removes ability to interrupt and restart operations while there
hasn't been any side-effect.

The reason: applications.  There are some apps it seems that generate
signals at a fast rate.  This means, that if the operation cannot make
enough progress between two signals, it will be restarted for ever.  This
bug actually manifested itself with 'krusader' trying to open a file for
writing under sshfs.  Thanks to Eduard Czimbalmos for the report.

The problem can be solved just by making open() uninterruptible, because in
this case it was the truncate operation that slowed down the progress.  But
it's better to solve this by simply not allowing interrupts at all (except
SIGKILL), because applications don't expect file operations to be
interruptible anyway.  As an added bonus the code is simplified somewhat.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Miklos Szeredi b36c31ba95 [PATCH] fuse: don't update file times
Don't change mtime/ctime/atime to local time on read/write.  Rather invalidate
file attributes, so next stat() will force a GETATTR call.  Bug reported by
Ben Grimm.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:47 -07:00
Miklos Szeredi 45323fb764 [PATCH] fuse: more flexible caching
Make data caching behavior selectable on a per-open basis instead of
per-mount.  Compatibility for the old mount options 'kernel_cache' and
'direct_io' is retained in the userspace library (version 2.4.0-pre1 or
later).

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:47 -07:00
Miklos Szeredi 413ef8cb30 [PATCH] FUSE - direct I/O
This patch adds support for the "direct_io" mount option of FUSE.

When this mount option is specified, the page cache is bypassed for
read and write operations.  This is useful for example, if the
filesystem doesn't know the size of files before reading them, or when
any kind of caching is harmful.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:46 -07:00
Miklos Szeredi 5a53368277 [PATCH] fuse: stricter mount option checking
Check for the presence of all mandatory mount options.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:46 -07:00
Miklos Szeredi 87729a5514 [PATCH] FUSE: tighten check for processes allowed access
This patch tightens the check for allowing processes to access non-privileged
mounts.  The rational is that the filesystem implementation can control the
behavior or get otherwise unavailable information of the filesystem user.  If
the filesystem user process has the same uid, gid, and is not suid or sgid
application, then access is safe.  Otherwise access is not allowed unless the
"allow_other" mount option is given (for which policy is controlled by the
userspace mount utility).

Thanks to everyone linux-fsdevel, especially Martin Mares who helped uncover
problems with the previous approach.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:46 -07:00
Miklos Szeredi db50b96c0f [PATCH] FUSE - readpages operation
This patch adds readpages support to FUSE.

With the help of the readpages() operation multiple reads are bundled
together and sent as a single request to userspace.  This can improve
reading performace.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:46 -07:00
Miklos Szeredi 1e9a4ed939 [PATCH] FUSE - mount options
This patch adds miscellaneous mount options to the FUSE filesystem.

The following mount options are added:

 o default_permissions:  check permissions with generic_permission()
 o allow_other:          allow other users to access files
 o allow_root:           allow root to access files
 o kernel_cache:         don't invalidate page cache on open

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:45 -07:00
Miklos Szeredi b6aeadeda2 [PATCH] FUSE - file operations
This patch adds the file operations of FUSE.

The following operations are added:

 o open
 o flush
 o release
 o fsync
 o readpage
 o commit_write

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:45 -07:00
Miklos Szeredi 9e6268db49 [PATCH] FUSE - read-write operations
This patch adds the write filesystem operations of FUSE.

The following operations are added:

 o setattr
 o symlink
 o mknod
 o mkdir
 o create
 o unlink
 o rmdir
 o rename
 o link

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:45 -07:00
Miklos Szeredi e5e5558e92 [PATCH] FUSE - read-only operations
This patch adds the read-only filesystem operations of FUSE.

This contains the following files:

 o dir.c
    - directory, symlink and file-inode operations

The following operations are added:

 o lookup
 o getattr
 o readlink
 o follow_link
 o directory open
 o readdir
 o directory release
 o permission
 o dentry revalidate
 o statfs

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:45 -07:00
Miklos Szeredi 334f485df8 [PATCH] FUSE - device functions
This adds the FUSE device handling functions.

This contains the following files:

 o dev.c
    - fuse device operations (read, write, release, poll)
    - registers misc device
    - support for sending requests to userspace

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:44 -07:00
Miklos Szeredi d8a5ba4545 [PATCH] FUSE - core
This patch adds FUSE core.

This contains the following files:

 o inode.c
    - superblock operations (alloc_inode, destroy_inode, read_inode,
      clear_inode, put_super, show_options)
    - registers FUSE filesystem

 o fuse_i.h
    - private header file

Requirements
============

 The most important difference between orinary filesystems and FUSE is
 the fact, that the filesystem data/metadata is provided by a userspace
 process run with the privileges of the mount "owner" instead of the
 kernel, or some remote entity usually running with elevated
 privileges.

 The security implication of this is that a non-privileged user must
 not be able to use this capability to compromise the system.  Obvious
 requirements arising from this are:

  - mount owner should not be able to get elevated privileges with the
    help of the mounted filesystem

  - mount owner should not be able to induce undesired behavior in
    other users' or the super user's processes

  - mount owner should not get illegitimate access to information from
    other users' and the super user's processes

 These are currently ensured with the following constraints:

  1) mount is only allowed to directory or file which the mount owner
    can modify without limitation (write access + no sticky bit for
    directories)

  2) nosuid,nodev mount options are forced

  3) any process running with fsuid different from the owner is denied
     all access to the filesystem

 1) and 2) are ensured by the "fusermount" mount utility which is a
    setuid root application doing the actual mount operation.

 3) is ensured by a check in the permission() method in kernel

 I started thinking about doing 3) in a different way because Christoph
 H. made a big deal out of it, saying that FUSE is unacceptable into
 mainline in this form.

 The suggested use of private namespaces would be OK, but in their
 current form have many limitations that make their use impractical (as
 discussed in this thread).

 Suggested improvements that would address these limitations:

   - implement shared subtrees

   - allow a process to join an existing namespace (make namespaces
     first-class objects)

   - implement the namespace creation/joining in a PAM module

 With all that in place the check of owner against current->fsuid may
 be removed from the FUSE kernel module, without compromising the
 security requirements.

 Suid programs still interesting questions, since they get access even
 to the private namespace causing some information leak (exact
 order/timing of filesystem operations performed), giving some
 ptrace-like capabilities to unprivileged users.  BTW this problem is
 not strictly limited to the namespace approach, since suid programs
 setting fsuid and accessing users' files will succeed with the current
 approach too.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:44 -07:00