Commit Graph

34305 Commits

Author SHA1 Message Date
Ingo Molnar 6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Cyrill Gorcunov cec6be6d10 x86: apic: Fixmap apic address even if apic disabled
In case if apic were disabled by boot option
we still need read_apic operation. So fixmap
a fake apic area if needed.

[ Impact: fix boot crash ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
Cc: eswierk@aristanetworks.com
LKML-Reference: <20090511134140.GH4624@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 15:50:58 +02:00
Andreas Herrmann 97a5271465 x86: display extended apic registers with print_local_APIC and cpu_debug code
Both print_local_APIC (used when apic=debug kernel param is set) and
cpu_debug code missed support for some extended APIC registers that
I'd like to see.

This adds support to show:

 - extended APIC feature register
 - extended APIC control register
 - extended LVT registers

[ Impact: print more debug info ]

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090508162350.GO29045@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 14:37:36 +02:00
Yinghai Lu 4401da6111 x86: read apic ID in the !acpi_lapic case
Ed found that on 32-bit, boot_cpu_physical_apicid is not read right,
when the mptable is broken.

Interestingly, actually three paths use/set it:

 1. acpi: at that time that is already read from reg
 2. mptable: only read from mptable
 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit

so we could read the apic id for the 2/3 path. We trust the hardware
register more than we trust a BIOS data structure (the mptable).

We can also avoid the double set_fixmap() when acpi_lapic
is used, and also need to move cpu_has_apic earlier and
call apic_disable().

Also when need to update the apic id, we'd better read and
set the apic version as well - so that quirks are applied precisely.

v2: make path 3 with 64bit, use -1 as apic id, so could read it later.
v3: fix whitespace problem pointed out by Ed Swierk

[ Impact: get correct apic id for bsp other than acpi path ]

Reported-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <49FC85A9.2070702@kernel.org>
[ v4: sanity-check in the ACPI case too ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 11:29:23 +02:00
Yinghai Lu 61fe91e131 x86: apic: Check rev 3 fadt correctly for physical_apic bit
Impact: fix fadt version checking

FADT2_REVISION_ID has value 3 aka rev 3 FADT. So need to use >= instead
of >, as other places in the code do.

[ Impact: extend scope of APIC boot quirk ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:52:40 +02:00
Yinghai Lu b9c61b7007 x86/pci: update pirq_enable_irq() to setup io apic routing
So we can set io apic routing only when enabling the device irq.

This is advantageous for IRQ descriptor allocation affinity: if we set up
the IO-APIC entry later, we have a chance to allocate the IRQ descriptor
later and know which device it is on and can set affinity accordingly.

[ Impact: standardize/enhance irq-enabling sequence for mptable irqs ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C46E.8000501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:10 +02:00
Yinghai Lu 5ef2183768 x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
So we could set io apic routing when ACPI is not enabled.

[ Impact: prepare for new functionality ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C422.5070400@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:09 +02:00
Yinghai Lu e20c06fd69 x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing().

[ Impact: extend function call API to prepare for new functionality ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C406.2040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:09 +02:00
Yinghai Lu bdfe8ac153 x86/acpi: move pin_programmed bit map to io_apic.c
Prepare to call setup_io_apic_routing() in pcibios_irq_enable()
also remove not needed member apic_id.

[ Impact: clean up, prepare for future change ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3DD.3050104@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:08 +02:00
Yinghai Lu a31f82057c x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()
The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration
code never got mainline because there were open discussions about it.

This call is needed to properly update the kernel's copy of the mptable,
when the update_mptable boot parameter is needed.

Now that the dust has settled with the APIC unification, and since there
were no objections when the patch was re-submitted, try this again.

[ Impact: fix the update_mptable boot parameter ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C387.7090103@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:08 +02:00
Yinghai Lu ee214558c2 x86: fix alloc_mptable()
Fix the conditions when we stop updating the mptable due to
running out of slots.

[ Impact: fix memory corruption / non-working update_mptable boot parameter ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3BB.1000609@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:07 +02:00
Yinghai Lu b9e0353fc8 x86/acpi: remove irq-compression trick on 32-bit
We already have a per cpu vector on 32-bit via recent changes, and
don't need this trick any more (which trick obfuscates the real GSI
mappings and which only triggers on larger systems to begin with):

On 3 ioapic system (24 per ioapic) before patch I got:

ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65

after the patch we get:

ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67

As it can be seen that GSIs now get mapped lineary.

[ Impact: simplify irq number mapping on bigger 32-bit systems ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C35C.7060207@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:06 +02:00
Ingo Molnar 7a309490da Merge commit 'v2.6.30-rc5' into x86/apic
Merge reason: this branch was on a .30-rc2 base - sync it up with
              all the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 09:50:02 +02:00
Linus Torvalds d9d05fda91 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: MCE: make cmci_discover_lock irq-safe
  x86: xen, i386: reserve Xen pagetables
  x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
  x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
  x86: fix boot hang in early_reserve_e820()
  x86: Fix a typo in a printk message
  x86, srat: do not register nodes beyond e820 map
2009-05-08 16:59:23 -07:00
Linus Torvalds b20a4e9483 Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix return value for sys_ipc
  microblaze: Storage class should be before const qualifier
2009-05-08 16:24:25 -07:00
Hidetoshi Seto e5299926d7 x86: MCE: make cmci_discover_lock irq-safe
Lockdep reports the warning below when Li tries to offline one cpu:

[  110.835487] =================================
[  110.835616] [ INFO: inconsistent lock state ]
[  110.835688] 2.6.30-rc4-00336-g8c9ed89 #52
[  110.835757] ---------------------------------
[  110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[  110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  110.835982]  (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b

cmci_clear() can be called via smp_call_function_single().

It is better to disable interrupt while holding cmci_discover_lock,
to turn it into an irq-safe lock - we can deadlock otherwise.

[ Impact: fix possible deadlock in the MCE code ]

Reported-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Shaohua Li<shaohua.li@intel.com>
2009-05-08 11:03:26 +02:00
Jeremy Fitzhardinge 33df4db04a x86: xen, i386: reserve Xen pagetables
The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.

[ Impact: fix Xen guest crash ]

Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08 10:49:11 +02:00
Huang Ying 6407df5ca5 x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
Tim Starling reported that crashdump will panic with kernel compiled
with CONFIG_KEXEC_JUMP due to null pointer deference in
machine_kexec_32.c: machine_kexec(), when deferencing
kexec_image. Refering to:

http://bugzilla.kernel.org/show_bug.cgi?id=13265

This patch fixes the BUG via replacing global variable reference:
kexec_image in machine_kexec() with local variable reference: image,
which is more appropriate, and will not be null.

Same BUG is in machine_kexec_64.c too, so fixed too in the same way.

[ Impact: fix crash on kexec ]

Reported-by: Tim Starling <tstarling@wikimedia.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 22:01:05 -07:00
Jan Beulich 4983439676 x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
With the introduction of the .brk section, special care must be taken
that no unused page table entries remain if _brk_end and _end are
separated by a 2M page boundary. cleanup_highmap() runs very early and
hence cannot take care of that, hence potential entries needing to be
removed past _brk_end must be cleared once the brk allocator has done
its job.

[ Impact: avoids undesirable TLB aliases ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 21:51:34 -07:00
Jan Beulich 6143876651 x86: fix boot hang in early_reserve_e820()
If the first non-reserved (sub-)range doesn't fit the size requested,
an endless loop will be entered. If a range returned from
find_e820_area_size() turns out insufficient in size, the range must
be skipped before calling the function again.

[ Impact: fixes boot hang on some platforms ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 21:42:39 -07:00
Linus Torvalds 2c66fa7e6b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
  [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
  i.MX31: Disable CPU_32v6K in mx3_defconfig.
  mx3fb: Fix compilation with CONFIG_PM
  mx27ads: move PBC mapping out of vmalloc space
  MXC: remove BUG_ON in interrupt handler
  mx31: remove mx31moboard_defconfig
  ARM: ARCH_MXC should select HAVE_CLK
  mxc : BUG in imx_dma_request
  mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
  [ARM] mv78xx0: update defconfig
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".
  [ARM] S3C2412: Add missing cache flush in suspend code
  [ARM] S3C: Add UDIVSLOT support for newer UARTS
  [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
2009-05-07 10:54:32 -07:00
Paul Gortmaker ae51e60984 [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.

Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07 17:21:01 +01:00
Kevin Hilman a029b706d3 [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
As per commit 284901a90a, use
DMA_BIT_MASK(n)

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07 14:44:47 +01:00
Nikanth Karthikesan e0e5ea3268 x86: Fix a typo in a printk message
[ Impact: printk message cleanup ]

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200905040908.27299.knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 12:23:12 +02:00
David Rientjes 7eccf7b227 x86, srat: do not register nodes beyond e820 map
The mem= option will truncate the memory map at a specified address so
it's not possible to register nodes with memory beyond the e820 upper
bound.

unparse_node() is only called when then node had memory associated with
it, although with the mem= option it is no longer addressable.

[ Impact: fix boot hang on certain (large) systems ]

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <alpine.DEB.2.00.0905051248150.20021@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 10:49:07 +02:00
Ingo Molnar b2e5d8588d irq: change ->set_affinity() to return status, fix
This build failure:

 arch/powerpc/sysdev/mpic.c:810: error: conflicting types for 'mpic_set_affinity'
 arch/powerpc/sysdev/mpic.h:39: error: previous declaration of 'mpic_set_affinity' was here
 make[2]: *** [arch/powerpc/sysdev/mpic.o] Error 1
 make[2]: *** Waiting for unfinished jobs....

Triggers because the function prototype was not updated when the
function call signature got changed by:

   d5dedd4: irq: change ->set_affinity() to return status

[ Impact: build fix on powerpc ]

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-arch@vger.kernel.org
LKML-Reference: <49F654E9.4070809@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 07:55:33 +02:00
Linus Torvalds 899ad580fe Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] xen_domu_defconfig: fix build issues/warnings
2009-05-05 15:48:03 -07:00
Linus Torvalds e91b3b2681 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: x86, mmiotrace: fix range test
  tracing: fix ref count in splice pages
2009-05-05 12:08:02 -07:00
Linus Torvalds 5e30302b9e Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo
  amd-iommu: fix iommu flag masks
  x86: initialize io_bitmap_base on 32bit
  x86: gettimeofday() vDSO: fix segfault when tv == NULL
2009-05-05 12:07:21 -07:00
Jan Beulich 0692698cb7 [IA64] xen_domu_defconfig: fix build issues/warnings
- drivers/xen/events.c did not compile
- xen_setup_hook caused a modpost section warning
- the use of u64 (instead of unsigned long long) together with a %llu
  in drivers/xen/balloon.c caused a compiler warning

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-05-05 11:43:13 -07:00
Linus Torvalds 32bc66d8d0 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix setting of oprofile cpu type
  powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries
  powerpc adjust oprofile_cpu_type version 3
2009-05-05 08:25:37 -07:00
Russell King 0c15702445 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 2009-05-05 09:22:26 +01:00
Russell King 64724ef8bd Merge branch 'for-rmk' of git://git.marvell.com/orion 2009-05-05 09:22:05 +01:00
Magnus Lilja 25971dfe3a i.MX31: Disable CPU_32v6K in mx3_defconfig.
The i.MX31 ARM11 core is not a v6K core. Disable this option as it
is incompatible with non v6K cores.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:38:04 +02:00
Uwe Kleine-König 7b9020badf mx27ads: move PBC mapping out of vmalloc space
Before this patch I got the following line in my dmesg:

	[    0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space

VMALLOC_END is 0xf4000000 and there are the following other mappings
defined for mx27ads:

	(0xa0500000,+0x00001000) maps to 0xffff0000
	(0x10000000,+0x00100000) maps to 0xf4000000
	(0x80000000,+0x00100000) maps to 0xf4100000
	(0xd8000000,+0x00100000) maps to 0xf4200000

So map PBC to 0xf4300000.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:37:08 +02:00
Sascha Hauer e2c97e7fdc MXC: remove BUG_ON in interrupt handler
On i.MX31 I sometimes get spurious interrupts. There is no need
to crash the whole system when this happens. Instead, silently
ignore it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:37:01 +02:00
Valentin Longchamp f1fd4c64af mx31: remove mx31moboard_defconfig
We want to have a mx31_defconfig file that builds a kernel that is able
to boot on all support mx31 systems and thus also can be better tested
by automatic build scripts. For these reasons, this config file is not
needed anymore.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:36:52 +02:00
Guennadi Liakhovetski 9abf137c6d ARM: ARCH_MXC should select HAVE_CLK
All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:36:44 +02:00
Martin Fuzzey f2292532a5 mxc : BUG in imx_dma_request
On MX2 platforms imx_dma_request() calls request_irq() which may sleep
with interrupts disabled.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:36:36 +02:00
Martin Fuzzey de0096d809 mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
The sequence
	imx_dma_request()
	imx_dma_enable()
	imx_dma_free()
left the dma channel in_use mode and did not release the timer.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:36:22 +02:00
Nicolas Pitre 3a5df4bf2a [ARM] mv78xx0: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Nicolas Pitre 7e14acb440 [ARM] orion5x: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Nicolas Pitre f2d41ecb0f [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Andreas Herrmann 35d11680a9 x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo
Commit 7ad728f981
(cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t)
changed the output of /proc/cpuinfo for siblings:

Example on an AMD Phenom:

  physical id   : 0
  siblings : 1
  core id	   : 3
  cpu cores  : 4

Before that commit it was:

  physical id	: 0
  siblings : 4
  core id	   : 3
  cpu cores  : 4

Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings.
This is due to the following hunk of above commit:

|  --- a/arch/x86/kernel/cpu/proc.c
|  +++ b/arch/x86/kernel/cpu/proc.c
|  @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf
|          if (c->x86_max_cores * smp_num_siblings > 1) {
|                  seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
|                  seq_printf(m, "siblings\t: %d\n",
|  -                          cpus_weight(per_cpu(cpu_core_map, cpu)));
|  +                          cpumask_weight(cpu_sibling_mask(cpu)));
|                  seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
|                  seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
|                  seq_printf(m, "apicid\t\t: %d\n", c->apicid);

This was a mistake, because the impact line shows that this side-effect
was not anticipated:

   Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y

So revert the respective hunk to restore the old behavior.

[ Impact: fix sibling-info regression in /proc/cpuinfo ]

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20090504182859.GA29045@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-04 20:36:49 +02:00
Joerg Roedel 6da7342ff1 amd-iommu: fix iommu flag masks
The feature bits should be set via bitmasks, not via feature IDs.

[ Impact: fix feature enabling in newer IOMMU versions ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090504102028.GA30307@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-04 15:05:24 +02:00
Robert P. J. Day 283a5d250e [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-03 10:58:31 +01:00
Russell King bc75159f2e Merge branch 'v2630-rc3-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-05-03 10:53:21 +01:00
Cyrill Gorcunov 9a8709d441 x86: uv - prevent NULL dereference in uv_system_init()
We may reach NULL dereference oops if kmalloc failed.
Prevent it with explicit BUG_ON.

[ Impact: more controlled assert in 'impossible' scenario ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090501202511.GE4633@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-03 10:49:31 +02:00
Cyrill Gorcunov 1cbac972ba x86: uv io-apic - use BUILD_BUG_ON instead of BUG_ON
The expression is known to be true/false at compilation
time so we're allowed to use build-time instead of
run-time check. Also align 'entry' items assignment.

[ Impact: shrink kernel a bit, cleanup ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090502093956.GB4791@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-03 10:38:21 +02:00
David Gibson 9fffb55f66 Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc
The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 16:52:26 -07:00