Commit Graph

86 Commits

Author SHA1 Message Date
Chris Mason 8b62b72b26 Btrfs: Use PagePrivate2 to track pages in the data=ordered code.
Btrfs writes go through delalloc to the data=ordered code.  This
makes sure that all of the data is on disk before the metadata
that references it.  The tracking means that we have to make sure
each page in an extent is fully written before we add that extent into
the on-disk btree.

This was done in the past by setting the EXTENT_ORDERED bit for the
range of an extent when it was added to the data=ordered code, and then
clearing the EXTENT_ORDERED bit in the extent state tree as each page
finished IO.

One of the reasons we had to do this was because sometimes pages are
magically dirtied without page_mkwrite being called.  The EXTENT_ORDERED
bit is checked at writepage time, and if it isn't there, our page become
dirty without going through the proper path.

These bit operations make for a number of rbtree searches for each page,
and can cause considerable lock contention.

This commit switches from the EXTENT_ORDERED bit to use PagePrivate2.
As pages go into the ordered code, PagePrivate2 is set on each one.
This is a cheap operation because we already have all the pages locked
and ready to go.

As IO finishes, the PagePrivate2 bit is cleared and the ordered
accoutning is updated for each page.

At writepage time, if the PagePrivate2 bit is missing, we go into the
writepage fixup code to handle improperly dirtied pages.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 13:31:07 -04:00
Chris Mason 9655d2982b Btrfs: use a cached state for extent state operations during delalloc
This changes the btrfs code to find delalloc ranges in the extent state
tree to use the new state caching code from set/test bit.  It reduces
one of the biggest causes of rbtree searches in the writeback path.

test_range_bit is also modified to take the cached state as a starting
point while searching.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 13:31:07 -04:00
Chris Mason 2c64c53d8d Btrfs: cache values for locking extents
Many of the btrfs extent state tree users follow the same pattern.
They lock an extent range in the tree, do some operation and then
unlock.

This translates to at least 2 rbtree searches, and maybe more if they
are doing operations on the extent state tree.  A locked extent
in the tree isn't going to be merged or changed, and so we can
safely return the extent state structure as a cached handle.

This changes set_extent_bit to give back a cached handle, and also
changes both set_extent_bit and clear_extent_bit to use the cached
handle if it is available.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 13:31:06 -04:00
Chris Mason 1edbb734b4 Btrfs: reduce CPU usage in the extent_state tree
Btrfs is currently mirroring some of the page state bits into
its extent state tree.  The goal behind this was to use it in supporting
blocksizes other than the page size.

But, we don't currently support that, and we're using quite a lot of CPU
on the rb tree and its spin lock.  This commit starts a series of
cleanups to reduce the amount of work done in the extent state tree as
part of each IO.

This commit:

* Adds the ability to lock an extent in the state tree and also set
other bits.  The idea is to do locking and delalloc in one call

* Removes the EXTENT_WRITEBACK and EXTENT_DIRTY bits.  Btrfs is using
a combination of the page bits and the ordered write code for this
instead.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11 13:31:06 -04:00
Chris Mason b9473439d3 Btrfs: leave btree locks spinning more often
btrfs_mark_buffer dirty would set dirty bits in the extent_io tree
for the buffers it was dirtying.  This may require a kmalloc and it
was not atomic.  So, anyone who called btrfs_mark_buffer_dirty had to
set any btree locks they were holding to blocking first.

This commit changes dirty tracking for extent buffers to just use a flag
in the extent buffer.  Now that we have one and only one extent buffer
per page, this can be safely done without losing dirty bits along the way.

This also introduces a path->leave_spinning flag that callers of
btrfs_search_slot can use to indicate they will properly deal with a
path returned where all the locks are spinning instead of blocking.

Many of the btree search callers now expect spinning paths,
resulting in better btree concurrency overall.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:28 -04:00
Chris Mason b4ce94de9b Btrfs: Change btree locking to use explicit blocking points
Most of the btrfs metadata operations can be protected by a spinlock,
but some operations still need to schedule.

So far, btrfs has been using a mutex along with a trylock loop,
most of the time it is able to avoid going for the full mutex, so
the trylock loop is a big performance gain.

This commit is step one for getting rid of the blocking locks entirely.
btrfs_tree_lock takes a spinlock, and the code explicitly switches
to a blocking lock when it starts an operation that can schedule.

We'll be able get rid of the blocking locks in smaller pieces over time.
Tracing allows us to find the most common cause of blocking, so we
can start with the hot spots first.

The basic idea is:

btrfs_tree_lock() returns with the spin lock held

btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
the extent buffer flags, and then drops the spin lock.  The buffer is
still considered locked by all of the btrfs code.

If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
the spin lock and waits on a wait queue for the blocking bit to go away.

Much of the code that needs to set the blocking bit finishes without actually
blocking a good percentage of the time.  So, an adaptive spin is still
used against the blocking bit to avoid very high context switch rates.

btrfs_clear_lock_blocking() clears the blocking bit and returns
with the spinlock held again.

btrfs_tree_unlock() can be called on either blocking or spinning locks,
it does the right thing based on the blocking bit.

ctree.c has a helper function to set/clear all the locked buffers in a
path as blocking.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 09:25:08 -05:00
Yehuda Sadeh 1506fcc818 Btrfs: fiemap support
Now that bmap support is gone, this is the only way to get extent
mappings for userland.  These are still not valid for IO, but they
can tell us if a file has holes or how much fragmentation there is.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2009-01-21 14:39:14 -05:00
Yan Zheng 17d217fe97 Btrfs: fix nodatasum handling in balancing code
Checksums on data can be disabled by mount option, so it's
possible some data extents don't have checksums or have
invalid checksums. This causes trouble for data relocation.
This patch contains following things to make data relocation
work.

1) make nodatasum/nodatacow mount option only affects new
files. Checksums and COW on data are only controlled by the
inode flags.

2) check the existence of checksum in the nodatacow checker.
If checksums exist, force COW the data extent. This ensure that
checksum for a given block is either valid or does not exist.

3) update data relocation code to properly handle the case
of checksum missing.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-12 10:03:38 -05:00
Chris Mason 771ed689d2 Btrfs: Optimize compressed writeback and reads
When reading compressed extents, try to put pages into the page cache
for any pages covered by the compressed extent that readpages didn't already
preload.

Add an async work queue to handle transformations at delayed allocation processing
time.  Right now this is just compression.  The workflow is:

1) Find offsets in the file marked for delayed allocation
2) Lock the pages
3) Lock the state bits
4) Call the async delalloc code

The async delalloc code clears the state lock bits and delalloc bits.  It is
important this happens before the range goes into the work queue because
otherwise it might deadlock with other work queue items that try to lock
those extent bits.

The file pages are compressed, and if the compression doesn't work the
pages are written back directly.

An ordered work queue is used to make sure the inodes are written in the same
order that pdflush or writepages sent them down.

This changes extent_write_cache_pages to let the writepage function
update the wbc nr_written count.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-06 22:02:51 -05:00
Josef Bacik 2517920135 Btrfs: nuke fs wide allocation mutex V2
This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch
of little locks.

There is now a pinned_mutex, which is used when messing with the pinned_extents
extent io tree, and the extent_ins_mutex which is used with the pending_del and
extent_ins extent io trees.

The locking for the extent tree stuff was inspired by a patch that Yan Zheng
wrote to fix a race condition, I cleaned it up some and changed the locking
around a little bit, but the idea remains the same.  Basically instead of
holding the extent_ins_mutex throughout the processing of an extent on the
extent_ins or pending_del trees, we just hold it while we're searching and when
we clear the bits on those trees, and lock the extent for the duration of the
operations on the extent.

Also to keep from getting hung up waiting to lock an extent, I've added a
try_lock_extent so if we cannot lock the extent, move on to the next one in the
tree and we'll come back to that one.  I have tested this heavily and it does
not appear to break anything.  This has to be applied on top of my
find_free_extent redo patch.

I tested this patch on top of Yan's space reblancing code and it worked fine.
The only thing that has changed since the last version is I pulled out all my
debugging stuff, apparently I forgot to run guilt refresh before I sent the
last patch out.  Thank you,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-10-29 14:49:05 -04:00
Chris Mason c8b978188c Btrfs: Add zlib compression support
This is a large change for adding compression on reading and writing,
both for inline and regular extents.  It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress.  Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler.  This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now.  This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field.  Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k.  This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k.  This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data.  This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread.  This makes it tricky to
spread the compression load across all the cpus on the box.  We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 14:49:59 -04:00
Zheng Yan 5b21f2ed3f Btrfs: extent_map and data=ordered fixes for space balancing
* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated.  This allows us to do accounting for them properly.

* The balancing code relocates data extents indepdent of the underlying
inode.  The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).

* Don't take the drop_mutex in the create_subvol ioctl.  It isn't
required.

* Fix walking of the ordered extent list to avoid races with sys_unlink

* Change the lock ordering rules.  Transaction start goes outside
the drop_mutex.  This allows btrfs_commit_transaction to directly
drop the relocation trees.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26 10:05:38 -04:00
Chris Mason 4bef084857 Btrfs: Tree logging fixes
* Pin down data blocks to prevent them from being reallocated like so:

trans 1: allocate file extent
trans 2: free file extent
trans 3: free file extent during old snapshot deletion
trans 3: allocate file extent to new file
trans 3: fsync new file

Before the tree logging code, this was legal because the fsync
would commit the transation that did the final data extent free
and the transaction that allocated the extent to the new file
at the same time.

With the tree logging code, the tree log subtransaction can commit
before the transaction that freed the extent.  If we crash,
we're left with two different files using the extent.

* Don't wait in start_transaction if log replay is going on.  This
avoids deadlocks from iput while we're cleaning up link counts in the
replay code.

* Don't deadlock in replay_one_name by trying to read an inode off
the disk while holding paths for the directory

* Hold the buffer lock while we mark a buffer as written.  This
closes a race where someone is changing a buffer while we write it.
They are supposed to mark it dirty again after they change it, but
this violates the cow rules.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:07 -04:00
Chris Mason f421950f86 Btrfs: Fix some data=ordered related data corruptions
Stress testing was showing data checksum errors, most of which were caused
by a lookup bug in the extent_map tree.  The tree was caching the last
pointer returned, and searches would check the last pointer first.

But, search callers also expect the search to return the very first
matching extent in the range, which wasn't always true with the last
pointer usage.

For now, the code to cache the last return value is just removed.  It is
easy to fix, but I think lookups are rare enough that it isn't required anymore.

This commit also replaces do_sync_mapping_range with a local copy of the
related functions.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason a61e6f29dc Btrfs: Use a mutex in the extent buffer for tree block locking
This replaces the use of the page cache lock bit for locking, which wasn't
suitable for block size < page size and couldn't be used recursively.

The mutexes alone don't fix either problem, but they are the first step.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason 6af118ce51 Btrfs: Index extent buffers in an rbtree
Before, extent buffers were a temporary object, meant to map a number of pages
at once and collect operations on them.

But, a few extra fields have crept in, and they are also the best place to
store a per-tree block lock field as well.  This commit puts the extent
buffers into an rbtree, and ensures a single extent buffer for each
tree block.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason 247e743cbe Btrfs: Use async helpers to deal with pages that have been improperly dirtied
Higher layers sometimes call set_page_dirty without asking the filesystem
to help.  This causes many problems for the data=ordered and cow code.
This commit detects pages that haven't been properly setup for IO and
kicks off an async helper to deal with them.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason e6dcd2dc9c Btrfs: New data=ordered implementation
The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk.  This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.

The new code changes the way data allocations and extents work:

* When delayed allocation is filled, data extents are reserved, and
  the extent bit EXTENT_ORDERED is set on the entire range of the extent.
  A struct btrfs_ordered_extent is allocated an inserted into a per-inode
  rbtree to track the pending extents.

* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
  to that page.

* When all of the bytes corresponding to a single struct btrfs_ordered_extent
  are written, The previously reserved extent is inserted into the FS
  btree and into the extent allocation trees.  The checksums for the file
  data are also updated.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason 1259ab75c6 Btrfs: Handle write errors on raid1 and raid10
When duplicate copies exist, writes are allowed to fail to one of those
copies.  This changeset includes a few changes that allow the FS to
continue even when some IOs fail.

It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason 7b13b7b119 Btrfs: Don't drop extent_map cache during releasepage on the btree inode
The btree inode should only have a single extent_map in the cache,
it doesn't make sense to ever drop it.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason 44b8bd7edd Btrfs: Create a work queue for bio writes
This allows checksumming to happen in parallel among many cpus, and
keeps us from bogging down pdflush with the checksumming code.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 7e38326f5b Btrfs: Handle checksumming errors while reading data blocks
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason f188591e98 Btrfs: Retry metadata reads in the face of checksum failures
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason ce9adaa5a7 Btrfs: Do metadata checksums for reads via a workqueue
Before, metadata checksumming was done by the callers of read_tree_block,
which would set EXTENT_CSUM bits in the extent tree to show that a given
range of pages was already checksummed and didn't need to be verified
again.

But, those bits could go away via try_to_releasepage, and the end
result was bogus checksum failures on pages that never left the cache.

The new code validates checksums when the page is read.  It is a little
tricky because metadata blocks can span pages and a single read may
end up going via multiple bios.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 728131d8e4 Btrfs: Add additional debugging for metadata checksum failures
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 2d2ae54797 Btrfs: Add leak debugging for extent_buffer and extent_state
This also fixes one leak around the super block when failing to mount the
FS.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 239b14b32d Btrfs: Bring back mount -o ssd optimizations
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 0b86a832a1 Btrfs: Add support for multiple devices per filesystem
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason 065631f6dc Btrfs: checksum file data at bio submission time instead of during writepage
When we checkum file data during writepage, the checksumming is done one
page at a time, making it difficult to do bulk metadata modifications
to insert checksums for large ranges of the file at once.

This patch changes btrfs to checksum on a per-bio basis instead.  The
bios are checksummed before they are handed off to the block layer, so
each bio is contiguous and only has pages from the same inode.

Checksumming on a bio basis allows us to insert and modify the file
checksum items in large groups.  It also allows the checksumming to
be done more easily by async worker threads.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason d7fc640e6f Btrfs: Allocator improvements
Reduce CPU time searching for free blocks by optimizing find_first_extent_bit

Fix find_free_extent to make better use of the last_alloc hint.  Before it
was often finding blocks just before the hint.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason a86c12c73d Btrfs: Create larger bios for btree blocks
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason 80ea96b1f3 Btrfs: Add a lookup cache to the extent state tree
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason b0c68f8bed Btrfs: Enable delalloc accounting
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason 291d673e6a Btrfs: Do delalloc accounting via hooks in the extent_state code
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason 70dec8079d Btrfs: extent_io and extent_state optimizations
The end_bio routines are changed to take a pointer to the extent state
struct, and the state tree is walked in order to set/clear appropriate
bits as IO completes.  This greatly reduces the number of rbtree searches
done by the end_bio handlers, and reduces lock contention.

The extent_io releasepage function is changed to avoid expensive searches
for locked state.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason d1310b2e0c Btrfs: Split the extent_map code into two parts
There is now extent_map for mapping offsets in the file to disk and
extent_io for state tracking, IO submission and extent_bufers.

The new extent_map code shifts from [start,end] pairs to [start,len], and
pushes the locking out into the caller.  This allows a few performance
optimizations and is easier to use.

A number of extent_map usage bugs were fixed, mostly with failing
to remove extent_map entries when changing the file.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00