Commit Graph

68 Commits

Author SHA1 Message Date
Alexey Dobriyan cebe41d4b8 sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-09 11:08:33 +01:00
Clemens Ladisch d1db38c015 sound: virtuoso: add Xonar DS support
Add experimental support for the Asus Xonar DS.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-18 16:38:41 +01:00
Clemens Ladisch 65c3ac885c sound: virtuoso: split virtuoso.c
The virtuoso.c file has become rather big.  This patch splits it up so
that only code for very similar card models is in one file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:38 +02:00
Clemens Ladisch 826390796d sound: virtuoso: fix Xonar D1/DX silence after resume
When resuming, we better take the DACs out of the reset state before
trying to use them.

Reference: kernel bug #13599
	http://bugzilla.kernel.org/show_bug.cgi?id=13599

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-02 10:35:35 +02:00
Clemens Ladisch 04f9890df1 sound: virtuoso: add Xonar Essence ST support
Add support for the Asus Xonar Essence ST and its daughterboard.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:58 +02:00
Clemens Ladisch b990ae963a sound: virtuoso: enable HDAV S/PDIF input
The Xonar HDAV1.3 has a digital input jack, so enable the corresponding
device.

This is not related to the HDMI stuff, which stays unsupported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:52 +02:00
Clemens Ladisch 53bb705d12 sound: virtuoso: add another DX PCI ID
Add another PCI ID for a second revision of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:44 +02:00
Clemens Ladisch 930738de60 sound: virtuoso: add Xonar Essence STX support
Add support for the Asus Xonar Essence STX sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26 09:39:08 +01:00
Clemens Ladisch eacbb9dba6 sound: virtuoso: increase minimum volume to -60 dB
Use -60 dB as the minimum value of the master volume mixer control.
While the DACs would support ranges down to about -120 dB, such
attenuations are not useful in practice.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20 11:14:25 +01:00
Clemens Ladisch 30459d7b18 sound: oxygen: handle cards with broken EEPROM
Under as yet unknown circumstances, the first word of the sound card's
EEPROM gets overwritten.  When this has happened, we cannot rely on the
subsystem IDs that the kernel reads from the PCI configuration
registers.  Instead, we read the IDs directly from the EEPROM and do the
ID matching manually.

Because the model-specific driver cannot determine the model before
calling oxygen_pci_probe(), that function now gets a get_model()
callback as parameter.  The customizing of the model structure, which
was formerly done by the probe() callback, also has moved into
get_model().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:25 +01:00
Clemens Ladisch bb71858853 sound: oxygen: make the owner module a parameter of the probe function
Move the owner field out of the oxygen_model structure and make it
a parameter of oxygen_pci_probe(), because the actual owner module does
not depend on the card model.  Furthermore, moving it out of the model
structure allows us to create the card structure before the actual model
is known.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:22 +01:00
Clemens Ladisch 6ce6c473a7 sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
This reverts commit 7e86c0e685 ("do not
overwrite EEPROM on Xonar D2/D2X") because it did not actually help with
the problem.

More user reports show that the overwriting of the EEPROM is not
triggered by using this driver but by installing Linux, and that the
installation of any other operating system (even one without any CMI8788
driver) has the same effect.  In other words, the presence of this
driver does not have any effect on the occurrence of the error.  (So
far, the available evidence seems to point to a BIOS bug.)

Furthermore, it turns out that the EEPROM chip is protected against
stray write commands by the command format and by requiring a separate
write-enable command, so the error scenario in the previous commit (that
SPI writes can be misinterpreted as an EEPROM write command) is not even
theoretically possible.

The mixer control that was removed as a consequence of the previous
commit can only be partially emulated in userspace, which also means it
cannot be seen be the in-kernel OSS API emulation, so it is better to
revert that change.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:15:39 +01:00
Clemens Ladisch 45bf810113 sound: virtuoso: add newline
Add a missing newline.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-19 14:07:36 +01:00
Clemens Ladisch 22c733788b sound: virtuoso: enable UART on Xonar HDAV1.3
This hardware has a better chance of working correctly if we don't
forget to enable it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-19 14:07:21 +01:00
Clemens Ladisch 7e86c0e685 sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2X
On the Asus Xonar D2 and D2X models, the SPI chip select signal for the
fourth DAC shares its pin with the serial clock for the EEPROM that
contains the PCI subdevice ID values.  It appears that when DAC
registers are written and some other unknown conditions occur (probably
noise on the EEPROM's chip select line), the EEPROM gets overwritten
with garbage, which makes it impossible to properly detect the card
later.

Therefore, we better avoid DAC register writes and make sure that the
driver works with the DAC's registers' default values.  Consequently,
the sample format is now I2S instead of left-justified (no user-visible
change), and the DAC's volume/mute registers cannot be used anymore
(volume changes are now done by the software volume plugin).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-15 10:30:20 +01:00
Clemens Ladisch 7407a2e4b9 ALSA: virtuoso: add Xonar HDAV1.3 support
Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:12:11 +02:00
Clemens Ladisch c871c4a83a ALSA: virtuoso: rename AC97 callback function
Rename the callback function that switches between line and mic inputs
on the Xonar D1 because it is also usable on other models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:07:20 +02:00
Clemens Ladisch 70c27d345e ALSA: virtuoso: make number of PCM1796 DACs configurable
Do not use a hardcoded number when iterating over the PCM1796 DACs to
allow for cards with a different number of analog output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:06:38 +02:00
Clemens Ladisch 4f50d2fd00 ALSA: virtuoso: allow I2C-connected PCM1796
Add support for PCM1796 chips that are connected with an I2C bus instead
of SPI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:06:04 +02:00
Clemens Ladisch c2bc4ff58d ALSA: oxygen: add self-documenting functions
Introduce some trivial functions to better document the relationships of
the various model callbacks.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:05:29 +02:00
Clemens Ladisch dbbbd67444 ALSA: oxygen: configure MIDI via device_config
To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags.  This allows model drivers to
enable the UART without creating an ALSA MIDI device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:03:42 +02:00
Clemens Ladisch d76596b1ee ALSA: oxygen: rename pcm_dev_cfg
Rename the pcm_dev_cfg field to device_config because there will be
additional flags that do not describe PCM devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:02:08 +02:00
Clemens Ladisch c3f00739c5 ALSA: virtuoso: create common functions for GPIO bit switch controls
Factor out the common code of the mixer callbacks that handle controls
that just switch a single GPIO bit.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:01:11 +02:00
Clemens Ladisch fe10662c3c ALSA: virtuoso: handle D2X/DX dynamically
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so
we can handle the differences dynamically instead of using a separate
model structure for each one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:00:30 +02:00
Clemens Ladisch 568c59e722 ALSA: oxygen: add probe callback
Add a probe callback to the model structure so that model-specific
drivers can refine their model detection before the card is initialized.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 08:56:01 +02:00
Clemens Ladisch 5430c72b14 ALSA: virtuoso: add Xonar D1 support
Add support for the Asus Xonar D1.  It is the same as the DX, but
without the external power detection.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-14 10:44:13 +02:00
Clemens Ladisch 4a4bc53bc5 [ALSA] oxygen: add PM support
Add suspend/resume support.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:17 +02:00
Clemens Ladisch 92215f3a17 [ALSA] virtuoso: add xonar_enable_output()
Move the setting of the output enable GPIO bit to a separate function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:17 +02:00
Clemens Ladisch 75146fc0f9 [ALSA] oxygen: separate out hardware initialization code
Create separate functions for the code that initializes the hardware, as
opposed to initializing internal driver state, so that they can be
reused for resume support.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:17 +02:00
Clemens Ladisch bbbfb55266 [ALSA] oxygen: simplify DAC volume initialization
When initializing the DAC volume registers, we can just use the generic
volume update functions instead of setting the registers manually.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:16 +02:00
Clemens Ladisch e58aee9580 [ALSA] oxygen: save register writes
Save the written values of all CMI8788 and AC97 registers and of some of
the DAC/ADC registers so that it is possible to restore the register
state later.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:16 +02:00
Clemens Ladisch d023dc0aa2 [ALSA] oxygen: fix version in MODULE_LICENSE
Adjust the MODULE_LICENSE strings to properly reflect the actual license.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Clemens Ladisch 4972a177fe [ALSA] oxygen: generalize DAC volume TLV handling
Add a pointer for DAC volume TLV data to the model structure so that the
model driver do not need to manually assign it in their control filter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch e983532e44 [ALSA] oxygen: mute by default
Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch 193e813814 [ALSA] oxygen: generalize handling of DAC volume limits
Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch a8bb1bad9b [ALSA] virtuoso: fix DX front panel I/O
Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch 80060ecc45 [ALSA] virtuoso: initialize two-wire control register
On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch 387fb6a206 [ALSA] virtuoso: add GPIO 1 mixer control
Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch 1d98c7d4be [ALSA] oxygen: use SPDIF input only if present
If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch 11864b4b84 [ALSA] virtuoso: correctly switch input jack on Xonar DX
When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input by setting a
GPIO pin.  This requires an additional callback so that the model driver
can hook into the toggling of AC97 switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch a9d3cc485e [ALSA] virtuoso: add Xonar DX support
Add support for the Asus Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch 80647ee26e [ALSA] virtuoso: fix typo
Fix a (fortunately harmless) typo.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch aef1a535c4 [ALSA] virtuoso: change card short name
Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch d08267a9df [ALSA] virtuoso: set PCM1796 oversampling rate
When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch af9af1741f [ALSA] virtuoso: move some code to xonar_common_init()
Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch a694a6a0e4 [ALSA] virtuoso: allow both CS5381 and CS5361
Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch 271ebfca58 [ALSA] virtuoso: separate D2/D2X init functions
Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch e97f79994a [ALSA] oxygen: fix line-in recording selection (now for real)
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:30 +02:00
Clemens Ladisch db12b8e301 [ALSA] oxygen: move MIDI flag to model struct
Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch 87eedd2fd4 [ALSA] oxygen: make SPI/2-wire configuration model-specific
Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00