Commit Graph

11 Commits

Author SHA1 Message Date
Jernej Skrabec 67ee606a6b clk: sunxi-ng: a64: Allow parent change for VE clock
Cedrus driver wants to set VE clock higher than it's possible without
changing parent rate.

Allow changing parent rate for VE clock, so clock rate can be set
freely.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10 11:19:26 -08:00
Chen-Yu Tsai 5e06aa5052 clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL
The audio blocks require specific clock rates. Until now we were using
the closest clock rate possible with integer N-M factors. This resulted
in audio playback being slightly slower than it should be.

The vendor kernel gets around this (for some SoCs) by using sigma-delta
modulation to generate a fractional-N factor. As the PLL hardware is
identical in most chips, we can port the settings for H3 onto the A64.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-23 23:22:01 +08:00
Jagan Teki ee678706e4
clk: sunxi-ng: a64: Fix gate bit of DSI DPHY
DSI DPHY gate bit on MIPI DSI clock register is bit 15
not bit 30.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13 14:07:58 +01:00
Icenowy Zheng 859783d139
clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock
In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

Fixes: c6a0637460 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05 09:20:52 +01:00
Icenowy Zheng 5de39acaf3
clk: sunxi-ng: a64: Add max. rate constraint to video PLLs
Video PLLs on A64 can be set to higher rate that it is actually
supported by HW.

Limit maximum rate to 1008 MHz. This is the maximum allowed rate by BSP
clock driver. Interestengly, user manual specifies maximum frequency to
be 600 MHz. Historically, this data was wrong in some user manuals for
other SoCs, so more faith is put in BSP clock driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-05 09:16:10 +02:00
Jagan Teki 65b1e8a6ca
clk: sunxi-ng: a64: Add minimal rate for video PLLs
According to documentation and experience with other similar SoCs, video
PLLs don't work stable if their output frequency is set below 192 MHz.

Because of that, set minimal rate to both A64 video PLLs to 192 MHz.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-05 09:15:26 +02:00
Chen-Yu Tsai 83fe3be4d1 clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
On the A64, the MMC module clocks are fixed in the new timing mode,
i.e. they do not have a bit to select the mode. These clocks have
a 2x divider somewhere between the clock and the MMC module.

To be consistent with other SoCs supporting the new timing mode,
we model the 2x divider as a fixed post-divider on the MMC module
clocks.

This patch adds the post-dividers to the MMC clocks.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 10:09:57 +01:00
Chen-Yu Tsai 13e0dde8b2 clk: sunxi-ng: Support multiple variable pre-dividers
On the A83T, the AHB1 clock has a shared pre-divider on the two
PLL-PERIPH clock parents. To support such instances of shared
pre-dividers, this patch extends the mux clock type to support
multiple variable pre-dividers.

As the pre-dividers are only used to calculate the rate, but
do not participate in the factorization process, this is fairly
straightforward.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-07 15:32:15 +02:00
Philipp Tomsich fe686babf4 clk: sunxi-ng: Fix div/mult settings for osc12M on A64
The mult/div for osc12M was previously backwards (giving a 48M rate
for osc12M). Fix it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-20 09:49:43 +01:00
Stephen Boyd 30e1db86ba clk: sunxi-ng: Mark structs static and cleanup spaces
Some checkpatch warnings about spaces were missed and we didn't
mark two structs as static. Clean it up.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-16 11:27:28 -08:00
Maxime Ripard c6a0637460 clk: sunxi-ng: Add A64 clocks
Add the A64 CCU clocks set.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-03 09:06:18 +01:00