Commit Graph

2215 Commits

Author SHA1 Message Date
Linus Torvalds a2b9c1f620 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: don't delay blk_run_queue_async
  scsi: remove performance regression due to async queue run
  blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup
  block: rescan partitions on invalidated devices on -ENOMEDIA too
  cdrom: always check_disk_change() on open
  block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
2011-05-18 06:49:02 -07:00
Stefan Haberland aade6c0dfb [S390] dasd: prevent IO error during reserve/release loop
The termination of running CQR caused by reserve/release operations
may lead to an IO error if reserve/release is done in a tight loop.
Prevent this by increasing the retry counter after termination.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-10 17:13:42 +02:00
Heiko Carstens fdb1bb1575 [S390] sclp/memory hotplug: fix initial usecount of increments
Fix initial usecount of attached and assigned storage increments so
they can be set offline.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-10 17:13:42 +02:00
Heiko Carstens a985183285 [S390] irqstats: fix counting of pfault, dasd diag and virtio irqs
pfault, dasd diag and virtio all use the same external interrupt number.
The respective interrupt handlers decide by the subcode if they are
meant to handle the interrupt.
Counting is currently done before looking at the subcode which means
each handler counts an interrupt even if it is not handling it.
Fix this by moving the kstat code after the code which looks at the
subcode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-29 10:42:25 +02:00
Tejun Heo 9fd097b149 block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
In-kernel disk event polling doesn't matter for legacy/fringe drivers
and may lead to infinite event loop if ->check_events() implementation
generates events on level condition instead of edge.

Now that block layer supports suppressing exporting unlisted events,
simply leaving disk->events cleared allows these drivers to keep the
internal revalidation behavior intact while avoiding weird
interactions with userland event handler.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 21:33:05 +02:00
Stefan Weinhuber c7a29e56f0 [S390] dasd: check sense type in device change handler
When evaluating sense data in dasd_eckd_check_for_device_change, we
must always check for the type of sense data in byte 27, bit 0, to
make sure that the rest of the sense data is interpreted correctly.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-20 10:15:44 +02:00
Jan Glauber bffbbd2df4 [S390] qdio: reset error states immediately
The qdio hardware may surpress further interrupts as long as a SBAL is in
the error state. That can lead to unnotified data in the SBALs following
the error state. To prevent this behaviour change the SBAL[s] in error
state immediately to another program owned state so interrupts are again
received for further traffic on the device.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-20 10:15:43 +02:00
Stefan Weinhuber 65f8da4759 [S390] dasd: fix race between open and offline
The dasd_open function uses the private_data pointer of the gendisk to
find the dasd_block structure that matches the gendisk. When a DASD
device is set offline, we set the private_data pointer of the gendisk
to NULL and later remove the dasd_block structure, but there is still
a small race window, in which dasd_open could first read a pointer
from the private_data field and then try to use it, after the structure
has already been freed.
To close this race window, we will store a pointer to the dasd_devmap
structure of the base device in the private_data field. The devmap
entries are not deleted, and we already have proper locking and
reference counting in place, so that we can safely get from a devmap
pointer to the dasd_device and dasd_block structures of the device.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-20 10:15:43 +02:00
Linus Torvalds bb3c90f0de Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] compile fix for latest binutils
  [S390] cio: prevent purging of CCW devices in the online state
  [S390] qdio: fix init sequence
  [S390] Fix parameter passing for smp_switch_to_cpu()
  [S390] oprofile s390: prevent stack corruption
2011-04-08 07:36:14 -07:00
Peter Oberparleiter a2fc8485f8 [S390] cio: prevent purging of CCW devices in the online state
The cio_ignore purge function is intended to only remove CCW devices
which are in the offline state. There is a time frame after the purge
function finished where a CCW device is scheduled for removal but
still accessible. When the device is set online during this time
frame, it may first appear online before it is then removed.

Fix this by preventing that CCW devices can be set online while there
is work (such as removal triggered by the purge function) for it
pending. Also ensure that the purge function does not schedule devices
for removal which are in the process of being set online.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04 09:43:33 +02:00
Sebastian Ott aa5c8df398 [S390] qdio: fix init sequence
Reorder the initialization sequence of the qdio module to avoid
writing to an uninitialized debug feature entry. Also reorder
the exit function to restore a consistent cleanup path.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04 09:43:32 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 7c8d891c2c Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cmpxchg: implement cmpxchg64()
  [S390] xchg/cmpxchg: move to own header file
  [S390] ccwgroup_driver: remove duplicate members
  [S390] ccw_bus_type: make it static
  [S390] ccw_driver: remove duplicate members
  [S390] qdio: prevent handling of buffers if count is zero
  [S390] setup: register bss section as resource
  [S390] setup: simplify setup_resources()
  [S390] wire up sys_syncfs
  [S390] wire up sys_clock_adjtime
  [S390] wire up sys_open_by_handle_at
  [S390] wire up sys_name_to_handle_at
  [S390] oprofile: disable hw sampling for CONFIG_32BIT
  [S390] early: limit savesys cmd string handling
  [S390] early: Fix possible overlapping data buffer
2011-03-25 17:47:04 -07:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Sebastian Ott 3c190c51f5 [S390] ccwgroup_driver: remove duplicate members
Remove the owner and name members of struct
ccwgroup_driver and convert all drivers to store
this data in the embedded struct device_driver.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23 10:15:59 +01:00
Sebastian Ott d5ab5276ba [S390] ccw_bus_type: make it static
Make ccw_bus_type static. ccw_device drivers have to
use ccw_driver_register.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23 10:15:59 +01:00
Sebastian Ott 3bda058b0c [S390] ccw_driver: remove duplicate members
Remove the owner and name members of struct
ccw_driver and convert all drivers to store
this data in the embedded struct device_driver.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23 10:15:59 +01:00
Jan Glauber 9a26513eb6 [S390] qdio: prevent handling of buffers if count is zero
Exit do_QDIO early if the buffer count is zero to prevent side effects
in the following functions.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23 10:15:59 +01:00
Linus Torvalds c55d267de2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
Linus Torvalds 31598e8713 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] kexec: Disable ftrace during kexec
  [S390] support XZ compressed kernel
  [S390] css_bus_type: make it static
  [S390] css_driver: remove duplicate members
  [S390] css: remove subchannel private
  [S390] css: move chsc_private to drv_data
  [S390] css: move io_private to drv_data
  [S390] cio: move cdev pointer to io_subchannel_private
  [S390] cio: move options to io_sch_private
  [S390] cio: move asms to generic header
  [S390] cio: move orb definitions to separate header
  [S390] Write protect module text and RO data
  [S390] dasd: get rid of compile warning
  [S390] remove superfluous check from do_IRQ
  [S390] remove redundant stack check option
2011-03-17 10:10:49 -07:00
Linus Torvalds 7a6362800c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
2011-03-16 16:29:25 -07:00
Linus Torvalds e6bee325e4 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
2011-03-16 15:11:04 -07:00
Sebastian Ott 3041b6ab5f [S390] css_bus_type: make it static
Make css_bus_type static. Subchannel drivers have to
use css_driver_register.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:24 +01:00
Sebastian Ott e6aed122a9 [S390] css_driver: remove duplicate members
Remove the owner and name members of struct
css_driver and convert all drivers to store
this data in the embedded struct device_driver.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:24 +01:00
Sebastian Ott 085ee9db88 [S390] css: remove subchannel private
All subchannel drivers use drv_data, so get rid of the
additional private pointer of struct subchannel.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:24 +01:00
Sebastian Ott 85fb534e27 [S390] css: move chsc_private to drv_data
Use the subchannels drv_data to access chsc_private
for chsc subchannels.

Note: Also set the drv_data prior to the cio_enable_subchannel
call, since we can receive an interrupt the moment we enable
the subchannel and the IRQ handler relies on this data.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Sebastian Ott f92519e83e [S390] css: move io_private to drv_data
Use the subchannels drv_data to access io_subchannel_private
for io subchannels.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Sebastian Ott 97eb6bfcb9 [S390] cio: move cdev pointer to io_subchannel_private
Move the subchannels ccw device pointer from drv_data to
the private data for I/O subchannels, since it is not the
only drv_data for I/O subchannels. The next step will be
to make io_subchannel_private the new drv_data for I/O
subchannels.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Sebastian Ott c513d07a2d [S390] cio: move options to io_sch_private
Move the options member from struct subchannel to
io_subchannel_private since it's I/O subchannel specific.
Also remove the unused cio_get_options function.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Sebastian Ott dbda8ce540 [S390] cio: move asms to generic header
The ssch and csch functions are not I/O subchannel specific,
thus move them from io_sch.h to ioasm.h

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Sebastian Ott 9e6f9f851c [S390] cio: move orb definitions to separate header
Move the data definition for the orb union to a separate
header file. Also apply the curent codingstyle.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:23 +01:00
Heiko Carstens d54cddb620 [S390] dasd: get rid of compile warning
Get rid of this:

drivers/s390/block/dasd_eckd.c: In function 'dasd_eckd_build_cp_tpm_track.clone.8':
drivers/s390/block/dasd_eckd.c:2589:34: warning: 'len_to_track_end' may be used uninitialized in this function

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:22 +01:00
Sebastian Ott ee5894fb0f [S390] remove superfluous check from do_IRQ
Don't check for the int_type if an adapter interrupt is presented.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15 17:08:22 +01:00
Frank Blaschka dcf4ae2dba qeth: change some configurations defaults
This patch turns on RX checksum and GRO by default. To improve
receiving performance and reduce congestion in case of network
bursts we also increase the default number of inbound buffers.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 15:39:47 -07:00
David S. Miller 33175d84ee Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x_cmn.c
2011-03-10 14:26:00 -08:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Tejun Heo ffe80cea35 s390/tape_block: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

s390/tape_block buffers media changed state and clears it on
revalidation.  It will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-03-09 19:54:28 +01:00
David S. Miller 0a0e9ae1bd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
2011-03-03 21:27:42 -08:00
Martin Schwidefsky 0c2bd9b24e [S390] tape: deadlock on system work queue
The 34xx and 3590 tape driver uses the system work queue to defer work
from the interrupt function to process context, e.g. a medium sense
after an unsolicited interrupt. The tape commands started by the work
handler need to be asynchronous, otherwise a deadlock on the system
work queue can occur.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03 17:56:14 +01:00
Dan Carpenter b652277b09 [S390] keyboard: integer underflow bug
The "ct" variable should be an unsigned int.  Both struct kbdiacrs
->kb_cnt and struct kbd_data ->accent_table_size are unsigned ints.

Making it signed causes a problem in KBDIACRUC because the user could
set the signed bit and cause a buffer overflow.

Cc: <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03 17:56:14 +01:00
Martin Schwidefsky 0c0db0355b [S390] xpram: remove __initdata attribute from module parameters
The module parameter 'devs' and 'sizes' are marked as __initdata. The
memory for the parameters are freed after module_init completed. This
can lead to kernel crashes in param_free_charp. Remove the __initdata
attribute to fix the problem.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03 17:56:14 +01:00
Ursula Braun 70919e23ac qeth: remove needless IPA-commands in offline
If a qeth device is set offline, data and control subchannels are
cleared, which means removal of all IP Assist Primitive settings
implicitly. There is no need to delete those settings explicitly.
This patch removes all IP Assist invocations from offline.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-26 22:41:36 -08:00
Heiko Carstens 65c56e073e tty: phase out of ioctl file pointer for tty3270 as well
The patch "tty: now phase out the ioctl file pointer for good" missed
the tty3270 driver. This is the missing piece.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 09:56:13 -08:00
Christof Schmitt 038d9446a9 [SCSI] zfcp: Add information to symbolic port name when running in NPIV mode
Query the FC symbolic port name for reporting in the fc_host sysfs and
enable the symbolic_name attribute in the fc_host sysfs. When running
in NPIV mode, extend the symbolic port name with the devno and the
hostname. This allows better identification of Linux systems for SAN
and storage administrators.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:21 -05:00
Christof Schmitt 1947c72a12 [SCSI] zfcp: Move SCSI host and transport templates out of struct zfcp_data
The SCSI host and transport templates are the only members left in the
global zfcp_data struct. Move them out of zfcp_data  and remove the
now unused zfcp_data struct. Also update the names of the register and
unregister functions to use the zfcp_scsi prefix.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:17 -05:00
Christof Schmitt 2443c8b23a [SCSI] zfcp: Merge FCP task management setup with regular FCP command setup
For task management commands, only LUN and flags are required. The
regular FCP setup already sets the LUN in the fcp_cmnd. All is
required for merging the function is setting up the TM flags.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:14 -05:00
Christof Schmitt 259afe2ed9 [SCSI] zfcp: Move qtcb kmem_cache to zfcp_fsf.c
Move the kmem_cache for allocating the qtcb to zfcp_fsf.c and rename
it accordingly.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:12 -05:00
Christof Schmitt f9773229be [SCSI] zfcp: Use common FC kmem_cache for GPN_FT request
Switch the allocation of the GPN_FT request data to the FC kmem_cache
and remove the zfcp_gpn kmem_cache.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:09 -05:00
Christof Schmitt fcf7e6144d [SCSI] zfcp: Allocate GID_PN data through new FC kmem_cache
Allocate the data for the GID_PN request through the new FC
kmem_cache. While updating the GID_PN code, also introduce a helper
function for initializing the CT header for FC nameserver requests.
Remove the "paranoia" check as well, the GID_PN request data does not
suddenly change.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25 12:02:06 -05:00