Commit Graph

27 Commits

Author SHA1 Message Date
Kirill Tkhai e9a441b6e7 xfrm: Register xfrm_dev_notifier in appropriate place
Currently, driver registers it from pernet_operations::init method,
and this breaks modularity, because initialization of net namespace
and netdevice notifiers are orthogonal actions. We don't have
per-namespace netdevice notifiers; all of them are global for all
devices in all namespaces.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 10:59:23 -04:00
Daniel Axtens 779b7931b2 net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
If you take a GSO skb, and split it into packets, will the network
length (L3 headers + L4 headers + payload) of those packets be small
enough to fit within a given MTU?

skb_gso_validate_mtu gives you the answer to that question. However,
we recently added to add a way to validate the MAC length of a split GSO
skb (L2+L3+L4+payload), and the names get confusing, so rename
skb_gso_validate_mtu to skb_gso_validate_network_len

Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 17:49:17 -05:00
David S. Miller a81e4affe1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-01-26

One last patch for this development cycle:

1) Add ESN support for IPSec HW offload.
   From Yossef Efraim.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26 10:22:53 -05:00
David S. Miller 955bd1d216 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24 23:44:15 -05:00
Aviad Yehezkel aa5dd6fa6f xfrm: fix error flow in case of add state fails
If add state fails in case of device offload, netdev refcount
will be negative since gc task is attempting to dev_free this state.
This is fixed by putting NULL in state dev field.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismeny <borisp@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-19 06:44:22 +01:00
Yossef Efraim 50bd870a9e xfrm: Add ESN support for IPSec HW offload
This patch adds ESN support to IPsec device offload.
Adding new xfrm device operation to synchronize device ESN.

Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-18 10:42:59 +01:00
Shannon Nelson 92a2320697 xfrm: check for xdo_dev_ops add and delete
This adds a check for the required add and delete functions up front
at registration time to be sure both are defined.

Since both the features check and the registration check are looking
at the same things, break out the check for both to call.

Lastly, for some reason the feature check was setting xfrmdev_ops to
NULL if the NETIF_F_HW_ESP bit was missing, which would probably
surprise the driver later if the driver turned its NETIF_F_HW_ESP bit
back on.  We shouldn't be messing with the driver's callback list, so
we stop doing that with this patch.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-21 08:17:48 +01:00
Steffen Klassert 95bff4b580 xfrm: Allow to use the layer2 IPsec GSO codepath for software crypto.
We now have support for asynchronous crypto operations in the layer 2 TX
path. This was the missing part to allow the GSO codepath for software
crypto, so allow this codepath now.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:42 +01:00
Steffen Klassert f53c723902 net: Add asynchronous callbacks for xfrm on layer 2.
This patch implements asynchronous crypto callbacks
and a backlog handler that can be used when IPsec
is done at layer 2 in the TX path. It also extends
the skb validate functions so that we can update
the driver transmit return codes based on async
crypto operation or to indicate that we queued the
packet in a backlog queue.

Joint work with: Aviv Heller <avivh@mellanox.com>

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:36 +01:00
Steffen Klassert 3dca3f38cf xfrm: Separate ESP handling from segmentation for GRO packets.
We change the ESP GSO handlers to only segment the packets.
The ESP handling and encryption is defered to validate_xmit_xfrm()
where this is done for non GRO packets too. This makes the code
more robust and prepares for asynchronous crypto handling.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:31 +01:00
David S. Miller 8ce38aeb55 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2017-12-15

1) Currently we can add or update socket policies, but
   not clear them. Support clearing of socket policies
   too. From Lorenzo Colitti.

2) Add documentation for the xfrm device offload api.
   From Shannon Nelson.

3) Fix IPsec extended sequence numbers (ESN) for
   IPsec offloading. From Yossef Efraim.

4) xfrm_dev_state_add function returns success even for
   unsupported options, fix this to fail in such cases.
   From Yossef Efraim.

5) Remove a redundant xfrm_state assignment.
   From Aviv Heller.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 11:10:27 -05:00
Yossef Efraim 43024b9ccd xfrm: Fix xfrm_dev_state_add to fail for unsupported HW SA option
xfrm_dev_state_add function returns success for unsupported HW SA options.
Resulting the calling function to create SW SA without corrlating HW SA.
Desipte IPSec device offloading option was chosen.
These not supported HW SA options are hard coded within xfrm_dev_state_add
function.
SW backward compatibility will break if we add any of these option as old
HW will fail with new SW.

This patch changes the behaviour to return -EINVAL in case unsupported
option is chosen.
Notifying user application regarding failure and not breaking backward
compatibility for newly added HW SA options.

Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-01 07:10:01 +01:00
David Miller 0f6c480f23 xfrm: Move dst->path into struct xfrm_dst
The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.

Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.

This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.

When we don't have the top of an IPSEC bundle 'dst->path == dst'.

Move it down into xfrm_dst and key off of dst->xfrm.

Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30 09:54:26 -05:00
David Miller b6ca8bd5a9 xfrm: Move child route linkage into xfrm_dst.
XFRM bundle child chains look like this:

	xdst1 --> xdst2 --> xdst3 --> path_dst

All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.

The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.

We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure.  All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.

Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30 09:54:26 -05:00
Steffen Klassert 67a63387b1 xfrm: Fix negative device refcount on offload failure.
Reset the offload device at the xfrm_state if the device was
not able to offload the state. Otherwise we drop the device
refcount twice.

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-09-11 10:36:51 +02:00
Lorenzo Colitti 077fbac405 net: xfrm: support setting an output mark.
On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.

Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.

This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:

1. The xfrm mark is used to match xfrm policies and states, while
   the xfrm output mark is used to set the mark (and influence
   the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
   the originating socket or transformed packet, but the output
   mark is arbitrary and depends only on the state.

The use of a separate mark provides additional flexibility. For
example:

- A packet subject to two transforms (e.g., transport mode inside
  tunnel mode) can have two different output marks applied to it,
  one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
  emitted by an IPsec tunnel can be routed based on a mark that
  is determined by the tunnel, not by the marks of the
  unencrypted packets.
- Support for setting the output marks can be introduced without
  breaking any existing setups that employ both mark-based
  routing and xfrm tunnel mode. Simply changing the code to use
  the xfrm mark for routing output packets could xfrm mark could
  change behaviour in a way that breaks these setups.

If the output mark is unspecified or set to zero, the mark is not
set or changed.

Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-11 07:03:00 +02:00
Ilan Tayari ffdb5211da xfrm: Auto-load xfrm offload modules
IPSec crypto offload depends on the protocol-specific
offload module (such as esp_offload.ko).

When the user installs an SA with crypto-offload, load
the offload module automatically, in the same way
that the protocol module is loaded (such as esp.ko)

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02 11:00:15 +02:00
Florian Westphal ec30d78c14 xfrm: add xdst pcpu cache
retain last used xfrm_dst in a pcpu cache.
On next request, reuse this dst if the policies are the same.

The cache will not help with strict RR workloads as there is no hit.

The cache packet-path part is reasonably small, the notifier part is
needed so we do not add long hangs when a device is dismantled but some
pcpu xdst still holds a reference, there are also calls to the flush
operation when userspace deletes SAs so modules can be removed
(there is no hit.

We need to run the dst_release on the correct cpu to avoid races with
packet path.  This is done by adding a work_struct for each cpu and then
doing the actual test/release on each affected cpu via schedule_work_on().

Test results using 4 network namespaces and null encryption:

ns1           ns2          -> ns3           -> ns4
netperf -> xfrm/null enc   -> xfrm/null dec -> netserver

what                    TCP_STREAM      UDP_STREAM      UDP_RR
Flow cache:             14644.61        294.35          327231.64
No flow cache:		14349.81	242.64		202301.72
Pcpu cache:		14629.70	292.21		205595.22

UDP tests used 64byte packets, tests ran for one minute each,
value is average over ten iterations.

'Flow cache' is 'net-next', 'No flow cache' is net-next plus this
series but without this patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18 11:13:41 -07:00
Florian Westphal 09c7570480 xfrm: remove flow cache
After rcu conversions performance degradation in forward tests isn't that
noticeable anymore.

See next patch for some numbers.

A followup patcg could then also remove genid from the policies
as we do not cache bundles anymore.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18 11:13:41 -07:00
David S. Miller b079115937 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 12:43:08 -04:00
David S. Miller 93bbbfbb4a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2017-06-23

1) Use memdup_user to spmlify xfrm_user_policy.
   From Geliang Tang.

2) Make xfrm_dev_register static to silence a sparse warning.
   From Wei Yongjun.

3) Use crypto_memneq to check the ICV in the AH protocol.
   From Sabrina Dubroca.

4) Remove some unused variables in esp6.
   From Stephen Hemminger.

5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port.
   From Antony Antony.

6) Include the UDP encapsulation port to km_migrate announcements.
   From Antony Antony.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23 14:17:31 -04:00
Hangbin Liu b81f884a54 xfrm: fix xfrm_dev_event() missing when compile without CONFIG_XFRM_OFFLOAD
In commit d77e38e612 ("xfrm: Add an IPsec hardware offloading API") we
make xfrm_device.o only compiled when enable option CONFIG_XFRM_OFFLOAD.
But this will make xfrm_dev_event() missing if we only enable default XFRM
options.

Then if we set down and unregister an interface with IPsec on it. there
will no xfrm_garbage_collect(), which will cause dev usage count hold and
get error like:

unregister_netdevice: waiting for <dev> to become free. Usage count = 4

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-06-07 08:16:27 +02:00
Wei Yongjun 24d472e4e4 xfrm: Make function xfrm_dev_register static
Fixes the following sparse warning:

net/xfrm/xfrm_device.c:141:5: warning:
 symbol 'xfrm_dev_register' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-19 11:42:39 +02:00
Ilan Tayari 2c1497bbc8 xfrm: Fix NETDEV_DOWN with IPSec offload
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to
the device are flushed.

The condition for this is wrong, though, testing dev->hw_features
instead of dev->features. If a device has non-user-modifiable
NETIF_F_HW_ESP, then its xfrm_state objects are not flushed,
causing a crash later on after the device is deleted.

Check dev->features instead of dev->hw_features.

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-08 09:41:09 +02:00
Steffen Klassert f6e27114a6 net: Add a xfrm validate function to validate_xmit_skb
When we do IPsec offloading, we need a fallback for
packets that were targeted to be IPsec offloaded but
rerouted to a device that does not support IPsec offload.
For that we add a function that checks the offloading
features of the sending device and and flags the
requirement of a fallback before it calls the IPsec
output function. The IPsec output function adds the IPsec
trailer and does encryption if needed.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:07:28 +02:00
Steffen Klassert d77e38e612 xfrm: Add an IPsec hardware offloading API
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>

Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:10 +02:00
Steffen Klassert 21f42cc95f xfrm: Move device notifications to a sepatate file
This is needed for the upcomming IPsec device offloading.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:05:53 +02:00