Commit Graph

26 Commits

Author SHA1 Message Date
Nan Jia 339e4f66d1 xfs: Clean up xfs_trans_dup_dqinfo
Fixed two missing spaces.

Signed-off-by: Nan Jia <jiananmail@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 10:50:00 +10:00
Brian Foster 7f884dc198 xfs: fix quota block reservation leak when tp allocates and frees blocks
Al Viro reports that generic/231 fails frequently on XFS and bisected
the problem to the following commit:

	5d11fb4b xfs: rework zero range to prevent invalid i_size updates

... which is just the first commit that happens to cause fsx to
reproduce the problem. fsx reproduces via zero range calls. The
aforementioned commit overhauls zero range to use hole punch and
fallocate. As it turns out, the problem is reproducible on demand using
basic hole punch as follows:

$ mkfs.xfs -f -m crc=1,finobt=1 <dev>
$ mount <dev> /mnt -o uquota
$ xfs_io -f -c "falloc 0 50m" /mnt/file
$ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done
$ rm -f /mnt/file
$ repquota -us /mnt
...
User            used    soft    hard  grace    used  soft  hard  grace
----------------------------------------------------------------------
root      --     32K      0K      0K              3     0     0

A file is allocated with a single 50m extent. The extent count increases
via hole punches until the bmap converts to btree format. The file is
removed but quota reports 32k of space usage for the user. This
reservation is effectively leaked for the lifetime of the mount.

The reason this occurs is because the quota block reservation tracking
is confused when a transaction happens to free and allocate blocks at
the same time. Consider the following sequence of events:

- tp is allocated from xfs_free_file_space() and reserves several blocks
  for btree management. Blocks are reserved against the dquot and marked
  as such in the transaction (qtrx->qt_blk_res).
- 8 blocks are accounted free when the 32k range is punched out.
  xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets
  ->qt_bcount_delta to -8.
- Subsequently, a block is allocated against the same transaction by
  xfs_bmap_extents_to_btree() for btree conversion. A call to
  xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta
  to -7.
- The transaction is dup'd and committed by xfs_bmap_finish().
  xfs_trans_dup_dqinfo() sets the first transaction up such that it has a
  matching qt_blk_res and qt_blk_res_used of 1. The remaining unused
  reservation is transferred to the duplicate tp.

When the transactions are committed, the dquots are fixed up in
xfs_trans_apply_dquot_deltas() according to one of two methods:

1.) If the transaction holds a block reservation (->qt_blk_res != 0),
_only_ the unused portion reservation is unaccounted from the dquot.
Note that the tp duplication behavior of xfs_bmap_finish() makes it such
that qt_blk_res is typically 0 for tp's with unused reservation.
2.) Otherwise, the dquot is fixed up based on the block delta
(->qt_bcount_delta) created by the transaction.

Therefore, if a transaction has a negative qt_bcount_delta and positive
qt_blk_res_used, the former set of blocks that have been removed from
the file are never factored out of the in-core dquot reservation.
Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block
reservation and believes there is nothing to fix up. The on-disk
d_bcount is updated independently from qt_bcount_delta, and thus is
correct (and allows the quota usage to correct on remount).

To deal with this situation, we effectively want the "used reservation"
part of the transaction to be consistent with any freed blocks with
respect to quota tracking. For example, if 8 blocks are freed, the
subsequent single block allocation does not need to consume the initial
reservation made by the tp. Instead, it simply borrows one from the
previously freed. One possible implementation of such borrowing is to
avoid the blks_res_used increment when bcount_delta is negative. This
alone is flawed logic in that it only handles the case where blocks are
freed before allocated, however.

Rather than add more complexity to manage synchronization between
bcount_delta and blks_res_used, kill the latter entirely. blk_res_used
is only updated in one place and always in sync with delta_bcount.
Therefore, the net block reservation consumption of the transaction is
always available from bcount_delta. Calculate the reservation
consumption on the fly where necessary based on whether the tp has a
reservation and results in a positive net block delta on the inode.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 07:15:37 +10:00
Christoph Hellwig bb58e6188a xfs: move most of xfs_sb.h to xfs_format.h
More on-disk format consolidation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 14:27:09 +11:00
Christoph Hellwig 4fb6e8ade2 xfs: merge xfs_ag.h into xfs_format.h
More on-disk format consolidation.  A few declarations that weren't on-disk
format related move into better suitable spots.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 14:25:04 +11:00
Dave Chinner 2451337dd0 xfs: global error sign conversion
Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.

Errors for conversion (and comparison) found via searches like:

$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs

Negation points found via searches like:

$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs

[ with some bits I missed from Brian Foster ]

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 14:58:08 +10:00
Christoph Hellwig 10f73d27c8 xfs: fix the comment explaining xfs_trans_dqlockedjoin
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-12-04 14:26:57 -06:00
Dave Chinner a4fbe6ab1e xfs: decouple inode and bmap btree header files
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.

Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.

The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 16:28:49 -05:00
Dave Chinner 239880ef64 xfs: decouple log and transaction headers
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.

In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.

Note that these are kernel only header files, so this does not
translate to any userspace changes at all.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 16:17:44 -05:00
Dave Chinner 70a9883c5f xfs: create a shared header file for format-related information
All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.

Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 14:11:30 -05:00
Dave Chinner 6ca1c9063d xfs: separate dquot on disk format definitions out of xfs_quota.h
The on disk format definitions of the on-disk dquot, log formats and
quota off log formats are all intertwined with other definitions for
quotas. Separate them out into their own header file so they can
easily be shared with userspace.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:09:52 -05:00
Chandra Seetharaman 92f8ff73f1 xfs: Add pquota fields where gquota is used.
Add project quota changes to all the places where group quota field
is used:
   * add separate project quota members into various structures
   * split project quota and group quotas so that instead of overriding
     the group quota members incore, the new project quota members are
     used instead
   * get rid of usage of the OQUOTA flag incore, in favor of separate
     group and project quota flags.
   * add a project dquot argument to various functions.

Not using the pquotino field from superblock yet.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 10:35:32 -05:00
Dave Chinner b0a9dab78a xfs: dquot log reservations are too small
During review of the separate project quota inode patches, it became
obvious that the dquot log reservation calculation underestimated
the number dquots that can be modified in a transaction. This has
it's roots way back in the Irix quota implementation.

That is, when quotas were first implemented in XFS, it only
supported user and project quotas as Irix did not have group quotas.
Hence the worst case operation involving dquot modification was
calculated to involve 2 user dquots and 1 project dquot or 1 user
dequot and 2 project dquots. i.e. 3 dquots. This was determined back
in 1996, and has remained unchanged ever since.

However, back in 2001, the Linux XFS port dropped all support for
project quota and implmented group quotas over the top. This was
effectively done with a search-and-replace of project with group,
and as such the log reservation was not changed. However, with the
advent of group quotas, chmod and rename now could modify more than
3 dquots in a single transaction - both could modify 4 dquots. Hence
this log reservation has been wrong for a long time.

In 2005, project quota support was reintroduced into Linux, but it
was implemented to be mutually exclusive to group quotas and so this
didn't add any new changes to the dquot log reservation. Hence when
project quotas were in use (rather than group quotas) the log
reservation was again valid, just like in the Irix days.

Now, with the addition of the separate project quota inode, group
and project quotas are no longer mutually exclusive, and hence
operations can now modify three dquots per inode where previously it
was only two. The worst case here is the rename transaction, which
can allocate/free space on two different directory inodes, and if
they have different uid/gid/prid configurations and are world
writeable, then rename can actually modify 6 different dquots now.

Further, the dquot log reservation doesn't take into account the
space used by the dquot log format structure that precedes the dquot
that is logged, and hence further underestimates the worst case
log space required by dquots during a transaction. This has been
missing since the first commit in 1996.

Hence the worst case log reservation needs to be increased from 3 to
6, and it needs to take into account a log format header for each of
those dquots.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-09 16:43:16 -05:00
Chandra Seetharaman 83e782e1a1 xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead,
start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and
PQUOTA respectively.

On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD.

Read and write of the superblock does the conversion from *OQUOTA*
to *[PG]QUOTA*.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 17:39:22 -05:00
Chandra Seetharaman 0e6436d99e xfs: Change xfs_dquot_acct to be a 2-dimensional array
In preparation for combined pquota/gquota support, for the sake
of readability, change xfs_dquot_acct to be a 2-dimensional array.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 14:12:22 -05:00
Chandra Seetharaman 113a56835d xfs: Code cleanup and removal of some typedef usage
In preparation for combined pquota/gquota support, for the sake
of readability, do some code cleanup surrounding the affected
code.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 13:13:59 -05:00
Chandra Seetharaman 9cad19d2cb xfs: Define a new function xfs_is_quota_inode()
In preparation for combined pquota/gquota support, define
a new function to check if the given inode is a quota inode.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 13:03:49 -05:00
Brian Foster 4b6eae2e6a xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_t
Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a
parameter instead of just the xfs_disk_dquot_t so we can update
in-memory fields if necessary.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-22 16:05:52 -05:00
Thiago Farina 667a9291c5 xfs: Remove boolean_t typedef completely.
Since we are using C99 we have one builtin defined in include/linux/types.h,
use that instead.

v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm

Signed-off-by: Thiago Farina <tfarina@chromium.org>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-17 17:32:57 -06:00
Eric W. Biederman 431f19744d userns: Convert quota netlink aka quota_send_warning
Modify quota_send_warning to take struct kqid instead a type and
identifier pair.

When sending netlink broadcasts always convert uids and quota
identifiers into the intial user namespace.  There is as yet no way to
send a netlink broadcast message with different contents to receivers
in different namespaces, so for the time being just map all of the
identifiers into the initial user namespace which preserves the
current behavior.

Change the callers of quota_send_warning in gfs2, xfs and dquot
to generate a struct kqid to pass to quota send warning.  When
all of the user namespaces convesions are complete a struct kqid
values will be availbe without need for conversion, but a conversion
is needed now to avoid needing to convert everything at once.

Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18 01:01:40 -07:00
Dave Chinner ad1e95c54e xfs: clean up xfs_bit.h includes
With the removal of xfs_rw.h and other changes over time, xfs_bit.h
is being included in many files that don't actually need it. Clean
up the includes as necessary.

Also move the only-used-once xfs_ialloc_find_free() static inline
function out of a header file that is widely included to reduce
the number of needless dependencies on xfs_bit.h.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:21:00 -05:00
Dave Chinner 60a34607b2 xfs: move xfsagino_t to xfs_types.h
Untangle the header file includes a bit by moving the definition of
xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on
xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include
xfs_ag.h.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:54 -05:00
Christoph Hellwig a05931ceb0 xfs: remove the global xfs_Gqm structure
If we initialize the slab caches for the quota code when XFS is loaded there
is no need for a global and reference counted quota manager structure.  Drop
all this overhead and also fix the error handling during quota initialization.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14 12:06:32 -05:00
Mitsuo Hayasaka 70b5437653 xfs: cleanup quota check on disk blocks and inodes reservations
This patch is a cleanup of quota check on disk blocks and inodes
reservations, and changes it as follows.

(1) add a total_count variable to store the total number of
    current usages and new reservations for disk blocks and inodes,
    respectively.

(2) make it more readable to check if the local variables softlimit
    and hardlimit are positive. It has been changed as follows.
	    if (softlimit > 0ULL) -> if (softlimit)
	    if (hardlimit > 0ULL) -> if (hardlimit)
    This is because they are defined as xfs_qcnt_t which is unsigned.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-22 21:47:52 -06:00
Mitsuo Hayasaka 33e0edafd7 xfs: make inode quota check more general
The xfs checks quota when reserving disk blocks and inodes. In the block
reservation, it checks if the total number of blocks including current
usage and new reservation exceed quota. In the inode reservation,
it checks using the total number of inodes including only current usage
without new reservation. However, this inode quota check works well
since the caller of xfs_trans_dquot() always sets the argument of the
number of new inode reservation to 1 or 0 and inode is reserved one by
one in current xfs.

To make it more general, this patch changes it to the same way as the
block quota check.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit c922bbc819)
2012-02-21 10:13:59 -06:00
Mitsuo Hayasaka d0a3fe67e3 xfs: change available ranges of softlimit and hardlimit in quota check
In general, quota allows us to use disk blocks and inodes up to each
limit, that is, they are available if they don't exceed their limitations.
Current xfs sets their available ranges to lower than them except disk
inode quota check. So, this patch changes the ranges to not beyond them.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 20f12d8ac0)
2012-02-21 10:13:49 -06:00
Christoph Hellwig c59d87c460 xfs: remove subdirectories
Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code.  Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-12 16:21:35 -05:00