Commit Graph

12 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Daniel Lezcano ba5d08c0ea clocksource/drivers: Rename clocksource_probe to timer_probe
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:59:16 +02:00
Purna Chandra Mandal a726f1d2dd MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
Early clock API pic32_get_pbclk() is defined in early_clk.c and used by
time.c and early_console.c. When CONFIG_EARLY_PRINTK isn't set,
early_clk.c isn't compiled and time.c fails to link.

Fix it by compiling early_clk.c always. Also sort files in alphabetical
order.

Fixes: 6e4ad1b413 ("MIPS: pic32mzda: fix getting timer clock rate.")
Reported-by: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Joshua Henderson <digitalpeer@digitalpeer.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.7.x-
Patchwork: https://patchwork.linux-mips.org/patch/13383/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17 11:14:29 +00:00
Linus Torvalds 4305f42401 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...
2016-08-06 09:13:11 -04:00
Jonas Gorski 15f37e1588 MIPS: store the appended dtb address in a variable
Instead of rewriting the arguments to match the UHI spec, store the
address of a appended or UHI supplied dtb in fw_supplied_dtb.

That way the original bootloader arugments are kept intact while still
making the use of an appended dtb invisible for mach code.

Mach code can still find out if it is an appended dtb by comparing
fw_arg1 with fw_supplied_dtb.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alban Bedel <albeu@free.fr>
Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13699/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02 14:00:16 +02:00
Kefeng Wang 1a1d2f9968 mips: use of_platform_default_populate() to populate default bus
Use helper of_platform_default_populate() in linux/of_platform
when possible, instead of calling of_platform_populate() with
the default match table.

Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-23 15:00:42 -05:00
Linus Torvalds 07b75260eb Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...
2016-05-19 10:02:26 -07:00
Purna Chandra Mandal 6e4ad1b413 MIPS: pic32mzda: fix getting timer clock rate.
PIC32 clock driver is now implemented as platform driver instead of
as part of of_clk_init(). It meants all the clock modules are available
quite late in the boot sequence. So request for CPU clock by clk_get_sys()
and clk_get_rate() to find c0_timer rate fails.

To fix this use PIC32 specific early clock functions implemented for early
console support.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Joshua Henderson <digitalpeer@digitalpeer.com>
Patchwork: https://patchwork.linux-mips.org/patch/13262/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-17 11:22:51 +02:00
Linus Walleij d30a2b47d4 MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 13:52:05 +02:00
Stephen Boyd 2da5f5db39 clk: Get rid of HAVE_MACH_CLKDEV
This config was used for the ARM port so that it could use a
machine specific clkdev.h include, but those are all gone now.
The MIPS architecture is the last user, and from what I can tell
it doesn't actually use it anyway, so let's remove the config all
together.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <linux-mips@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Joshua Henderson <joshua.henderson@microchip.com>
2016-02-25 14:41:20 -08:00
Joshua Henderson 842b6b16f5 MIPS: dts: Add initial DTS for the PIC32MZDA Starter Kit
This adds basic DTS configuration for the PIC32MZDA chip and in turn the
PIC32MZDA Starter Kit.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12104/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24 02:54:00 +01:00
Joshua Henderson 2572f00db8 MIPS: Add support for PIC32MZDA platform
This adds support for the Microchip PIC32 MIPS microcontroller with the
specific variant PIC32MZDA. PIC32MZDA is based on the MIPS m14KEc core
and boots using device tree.

This includes an early pin setup and early clock setup needed prior to
device tree being initialized. In additon, an interface is provided to
synchronize access to registers shared across several peripherals.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12097/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24 02:53:28 +01:00