Currently the function toshiba_acpi_notify only takes care of hotkeys,
however, the TOSXXXX devices receive more events that can be useful.
This patch changes the function to be able to handle more events,
and in the process, move all hotkey related code residing in it to
a new function called toshiba_acpi_process_hotkeys.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The hotkey enabling code is being used by *_setup_keyboard and also by
*_resume.
This patch creates a new function called toshiba_acpi_enable_hotkeys to
be used by these two functions to avoid duplicating code.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Keyboard illumination level changes are performed by the BIOS, so no
events should be reported on keypress. This is already done on systems
using the legacy keymap, do it also for systems that don't use it.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
The WMI events associated to KEY_WLAN are for all the radio devices
available. Use KEY_RFKILL instead since it's more appropriate.
The state of radio devices is changed directly by the BIOS when hotkeys
are pressed, so no events should be reported.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Merged two patches modifying this one line
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In hpwl_add() there is a unused variable err to which we assign the
result of hp_wireless_input_setup() but we don't do anything depending
on the result so print out a message that informs the user if add()
(hp_wireless_input_setup()) fails since acpi_device_probe() doesn't
print anything in this case.
Signed-off-by: Giedrius Statkevicius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
toshiba-acpi was always missing TOS6207 ID so it did not load automatically
on some laptops (such as Portege R100). But it worked fine if loaded manually.
Commit 135740de77 ("toshiba_acpi: Convert to use acpi_driver") broke that
and the driver does not work even when loaded manually since then.
Add TOS6207 ID to fix it.
Tested on Toshiba Portege R100.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The pci_dev_put() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
For msi-wmi.c:
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Bug 86521 uncovered that some TOS6208 devices also return
non zero values on a write call to the backlight method,
thus getting caught and bailed out by the extra check code.
This patch changes the set_lcd_brightness function to its
"original" state by just adapting it to the new function
format.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on
the kerne commandline, add a quirk for this.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1173681
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The WMI buffer can contain multiple events. First value in buffer is
length of event followed by data of specified length. After that is next
length and next data. When length is zero then there is no more events
in bufffer.
This patch adds support for processing all events in buffer (not only
first) and parse more event types (not only hotkey events). Because of
variable length of events sometimes BIOS fills more hotkeys (or other
values) into single WMI event. In this case this patch also processes
these multiple hotkeys (and not only first one).
Some event types are just ignored because kernel is not interested in
them (e.g. NIC Link status, battery unplug, ...).
This patch is based on DSDT table from Dell Latitude E6440. Code should
be backward compatible so will process other events of old types same as
before this patch.
This patch also fixes a problem with unknown WMI event messages being
written to the log. Now all known events are parsed and those which are
not interesting to the kernel are dropped without an unknown WMI event
message.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
eeepc_acpi_notify increases the indentation level to a whopping four. If
we revise the conditions a bit, we can reduce that to a more soothing
two and satisfy the indentation guidelines in Documentation/CodingStyle.
Remove an unwanted space while we're in the neighbourhood.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In eeepc_hotk_thaw, we assume that get_acpi() will effectively return a
bool. However, it is possible that get_acpi() returns an error instead.
We should not be writing error values to the ACPI device, even though
it's quite possible that we couldn't contact the ACPI device in the
first place.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
eeepc_get_fan_pwm and eeepc_set_fan_pwm convert the PWM value read from
the fan to a range lmsensors understands. Unfortunately this is only
clear if you are familiar with how lmsensors handles duty cycles.
Introduce two conversion functions that document the goal of these
conversions.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
eeepc_[gs]et_fan_ctrl uses some magic numbers. These numbers mean
something more than just the number. Describe them with macros instead
of comments in one of the functions.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The rfkill notifier node names are used in three different places. As a
matter of style, it is better to store them somewhere and have the
compiler warn us about typos in the function arguments.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As per Documentation/CodingStyle ch. 2, it is preferred that we don't
break user visible strings, in order to allow users to grep for them.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In eeepc_rfkill_hotplug there's an if statement with a big tail that
ends right before the out_unlock label. We might as well invert the
condition and jump to out_unlock in that case, pretty much like the rest
of the code does. This removes an indentation level for a large chunk of
code and also stops suggesting there might be an else clause.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Instead of using a magic constant 0x20 in some drivers to get data only
from the KBC port we should use the constant defined in i8042.h with
the same value. Also, this makes these drivers uniform with what
constant the only other filter function uses in
drivers/input/misc/ideapad_slidebar.c.
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make hp_accel dependent on SERIO_I8042 in the Kconfig because since commit
a4c724d072 ('platform: hp_accel: add a i8042
filter to remove HPQ6000 data from kb bus stream') hp_accel includes i8042.h
and serio.h.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Add a i8042 filter to hp_accel to remove accelerometer's data with acpi
id HPQ6000 from keyboard bus stream. The codes sent by accelerometer are
e0 25, e0 26, e0 27 and e0 28. The relevant information is already
passed through /dev/freefall so no need to send these undocumented weird
signals through the keyboard bus. Also, unclogs `dmesg` because atkbd
complained about weird scan codes, saves processing power and disk
space.
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Yoga 3 does not contain any physical rfkill switch. Therefore
disable the rfkill switch identically to the Yoga 2 approach.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The acpi-video backlight interface on the Acer KAV80 is broken, and worse
it causes the entire machine to slow down significantly after a suspend/resume.
Blacklist it, and use the acer-wmi backlight interface instead. Note that
the KAV80 is somewhat unique in that it is the only Acer model where we
fall back to acer-wmi after blacklisting, rather then using the native
(e.g. intel) backlight driver. This is done because there is no native
backlight interface on this model.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The acpi-video backlight interface on the NC210 does not work, blacklist it
and use the samsung-laptop interface instead.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=861573
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
X550VB as many others Asus laptops need wapf4 quirk to make RFKILL
switch be functional. Otherwise system boots with wireless card
disabled and is only possible to enable it by suspend/resume.
Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1089731#c23
Reported-and-tested-by: Vratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As bug #72551, the Toshiba TECRA A50-A series models also come with the
new keymap layout as found out by Azael Avalos, so add it to the dmi
table.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=76971
Reported-and-tested-by: Blindekinder <rafael.raccuia@blindekinder.com>
Cc: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dell-wmi: Fix access out of memory
eeepc-laptop: Cleanups, refactoring, sysfs perms, and improved error handling
intel-rst: ACPI and error handling cleanups
thinkpad-acpi: Whitespace cleanup
toshiba_acpi: HCI/SCI interface update, keyboard backlight type 2 support,
new scancodes, cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUOZYVAAoJEKbMaAwKp364ai0H/1ih+WdnPD2OWRdLxFlg71i8
muVP1XVzkizEuZNXheMSgF/NMvQBkhbsl7yGf40EBlFlNro/AOQztmNzHG+ttGDs
86Y+zDlAxfLR8ro9wBRumelOhKWhctAR3dkV2xBW0T0iO76P2KUnyn2flAjbfmAT
NVQ9U4dzrUzDlTbsvkI9mXPlKYbWRbNOmoZ6L6ExNGffJjk9jPQevtvw+TmxDL7e
2Qt19kNEcCoqOT/Oe6rhL4iaCWx+b43PZBKp6krKposezxeegJeJmcA4CCWUkk+L
oz9ur3m5I6s0qCcQUtDAYhZgM3H9zlfkewYJknCrTpFj0JBks8Erh9fOco1K8rs=
=b2qK
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v3.18-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"The following have all spent at least a few days in linux-next, most
for more than a week. These are mostly cleanups and error handling
improvements with a few updates to extend existing support to newer
hardware.
Details:
- dell-wmi: fix access out of memory
- eeepc-laptop: cleanups, refactoring, sysfs perms, and improved
error handling
- intel-rst: ACPI and error handling cleanups
- thinkpad-acpi: whitespace cleanup
- toshiba_acpi: HCI/SCI interface update, keyboard backlight type 2
support, new scancodes, cleanups"
* tag 'platform-drivers-x86-v3.18-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (23 commits)
toshiba_acpi: Adapt kbd_bl_timeout_store to the new kbd type
toshiba_acpi: Change HCI/SCI functions return code type
toshiba_acpi: Unify return codes prefix from HCI/SCI to TOS
toshiba_acpi: Rename hci_raw to tci_raw
dell-wmi: Fix access out of memory
eeepc-laptop: clean up control flow in *_rfkill_notifier
eeepc-laptop: store_cpufv: return error if set_acpi fails
eeepc-laptop: check proper return values in get_cpufv
eeepc-laptop: make fan1_input really read-only
eeepc-laptop: pull out SENSOR_STORE_FUNC and SENSOR_SHOW_FUNC macros
eeepc-laptop: tell sysfs that the disp attribute is write-only
eeepc-laptop: pull out ACPI_STORE_FUNC and ACPI_SHOW_FUNC macros
eeepc-laptop: use DEVICE_ATTR* to instantiate device_attributes
eeepc-laptop: change sysfs function names to API expectations
eeepc-laptop: clean up coding style
eeepc-laptop: simplify parse_arg()
intel-rst: Clean up ACPI add function
intel-rst: Use ACPI_FAILURE() macro instead !ACPI_SUCCESS() for error checking
x86: thinkpad_acpi.c: fixed spacing coding style issue
toshiba_acpi: Support new keyboard backlight type
...
- Rework the handling of wakeup IRQs by the IRQ core such that
all of them will be switched over to "wakeup" mode in
suspend_device_irqs() and in that mode the first interrupt
will abort system suspend in progress or wake up the system
if already in suspend-to-idle (or equivalent) without executing
any interrupt handlers. Among other things that eliminates the
wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt
flag with interrupts which don't really need it and should not
use it (Thomas Gleixner and Rafael J Wysocki).
- Switch over ACPI to handling wakeup interrupts with the help
of the new mechanism introduced by the above IRQ core rework
(Rafael J Wysocki).
- Rework the core generic PM domains code to eliminate code that's
not used, add DT support and add a generic mechanism by which
devices can be added to PM domains automatically during
enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
- Add debugfs-based mechanics for debugging generic PM domains
(Maciej Matraszek).
- ACPICA update to upstream version 20140828. Included are updates
related to the SRAT and GTDT tables and the _PSx methods are in
the METHOD_NAME list now (Bob Moore and Hanjun Guo).
- Add _OSI("Darwin") support to the ACPI core (unfortunately, that
can't really be done in a straightforward way) to prevent
Thunderbolt from being turned off on Apple systems after boot
(or after resume from system suspend) and rework the ACPI Smart
Battery Subsystem (SBS) driver to work correctly with Apple
platforms (Matthew Garrett and Andreas Noever).
- ACPI LPSS (Low-Power Subsystem) driver update cleaning up the
code, adding support for 133MHz I2C source clock on Intel Baytrail
to it and making it avoid using UART RTS override with Auto Flow
Control (Heikki Krogerus).
- ACPI backlight updates removing the video_set_use_native_backlight
quirk which is not necessary any more, making the code check the
list of output devices returned by the _DOD method to avoid
creating acpi_video interfaces that won't work and adding a quirk
for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak).
- New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin).
- Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
Sudip Mukherjee, Yijing Wang, and Zhang Rui).
- cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
Rasmus Villemoes).
- cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name
change among other things), ppc-corenet, powernv (Viresh Kumar,
Preeti U Murthy, Shilpasri G Bhat, Lucas Stach).
- cpuidle support for DT-based idle states infrastructure, new
ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi,
Rasmus Villemoes).
- ARM big.LITTLE cpuidle driver updates: support for DT-based
initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
Kevin Hilman).
- Rework of the test_suspend kernel command line argument and
a new trace event for console resume (Srinivas Pandruvada,
Todd E Brandt).
- Second attempt to optimize swsusp_free() (hibernation core) to
make it avoid going through all PFNs which may be way too slow on
some systems (Joerg Roedel).
- devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
- rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS
entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman).
- PM core fix related to clock management (Geert Uytterhoeven).
- PM core's sysfs code cleanup (Johannes Berg).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=sIv/
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Features-wise, to me the most important this time is a rework of
wakeup interrupts handling in the core that makes them work
consistently across all of the available sleep states, including
suspend-to-idle. Many thanks to Thomas Gleixner for his help with
this work.
Second is an update of the generic PM domains code that has been in
need of some care for quite a while. Unused code is being removed, DT
support is being added and domains are now going to be attached to
devices in bus type code in analogy with the ACPI PM domain. The
majority of work here was done by Ulf Hansson who also has been the
most active developer this time.
Apart from this we have a traditional ACPICA update, this time to
upstream version 20140828 and a few ACPI wakeup interrupts handling
patches on top of the general rework mentioned above. There also are
several cpufreq commits including renaming the cpufreq-cpu0 driver to
cpufreq-dt, as this is what implements generic DT-based cpufreq
support, and a new DT-based idle states infrastructure for cpuidle.
In addition to that, the ACPI LPSS driver is updated, ACPI support for
Apple machines is improved, a few bugs are fixed and a few cleanups
are made all over.
Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
maintained by Kevin Hilman that will be merged through the PM tree.
Numbers-wise, the generic PM domains update takes the lead this time
with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
place goes to the wakeup interrupts handling rework (13 commits).
Specifics:
- Rework the handling of wakeup IRQs by the IRQ core such that all of
them will be switched over to "wakeup" mode in suspend_device_irqs()
and in that mode the first interrupt will abort system suspend in
progress or wake up the system if already in suspend-to-idle (or
equivalent) without executing any interrupt handlers. Among other
things that eliminates the wakeup-related motivation to use the
IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
need it and should not use it (Thomas Gleixner and Rafael Wysocki)
- Switch over ACPI to handling wakeup interrupts with the help of the
new mechanism introduced by the above IRQ core rework (Rafael Wysocki)
- Rework the core generic PM domains code to eliminate code that's
not used, add DT support and add a generic mechanism by which
devices can be added to PM domains automatically during enumeration
(Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
- Add debugfs-based mechanics for debugging generic PM domains
(Maciej Matraszek).
- ACPICA update to upstream version 20140828. Included are updates
related to the SRAT and GTDT tables and the _PSx methods are in the
METHOD_NAME list now (Bob Moore and Hanjun Guo).
- Add _OSI("Darwin") support to the ACPI core (unfortunately, that
can't really be done in a straightforward way) to prevent
Thunderbolt from being turned off on Apple systems after boot (or
after resume from system suspend) and rework the ACPI Smart Battery
Subsystem (SBS) driver to work correctly with Apple platforms
(Matthew Garrett and Andreas Noever).
- ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
adding support for 133MHz I2C source clock on Intel Baytrail to it
and making it avoid using UART RTS override with Auto Flow Control
(Heikki Krogerus).
- ACPI backlight updates removing the video_set_use_native_backlight
quirk which is not necessary any more, making the code check the
list of output devices returned by the _DOD method to avoid
creating acpi_video interfaces that won't work and adding a quirk
for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)
- New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)
- Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
Sudip Mukherjee, Yijing Wang, and Zhang Rui)
- cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
Rasmus Villemoes)
- cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
Murthy, Shilpasri G Bhat, Lucas Stach)
- cpuidle support for DT-based idle states infrastructure, new ARM64
cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
Villemoes)
- ARM big.LITTLE cpuidle driver updates: support for DT-based
initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
Kevin Hilman)
- Rework of the test_suspend kernel command line argument and a new
trace event for console resume (Srinivas Pandruvada, Todd E Brandt)
- Second attempt to optimize swsusp_free() (hibernation core) to make
it avoid going through all PFNs which may be way too slow on some
systems (Joerg Roedel)
- devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
- rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
update in MAINTAINERS (Heiko Stübner, Kevin Hilman)
- PM core fix related to clock management (Geert Uytterhoeven)
- PM core's sysfs code cleanup (Johannes Berg)"
* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
ACPI / fan: printk replacement
PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
PM / Domains: Rename cpu_data to cpuidle_data
cpufreq: cpufreq-dt: fix potential double put of cpu OF node
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
cpufreq: ppc-corenet: remove duplicate update of cpu_data
ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
PM / sleep: Rename platform suspend/resume functions in suspend.c
PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
ACPICA: Introduce acpi_enable_all_wakeup_gpes()
ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
ACPI / video: check _DOD list when creating backlight devices
PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
cpufreq: Replace strnicmp with strncasecmp
cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
PM / devfreq: exynos: Enable building exynos PPMU as module
PM / devfreq: Export helper functions for drivers
...
cycle:
- Increase the default ARCH_NR_GPIO from 256 to 512. This
was done to avoid having a custom <asm/gpio.h> header for
the x86 architecture - GPIO is custom and complicated
enough as it is already! We want to move to a radix to
store the descriptors going forward, and finally get rid
of this fixed array size altogether.
- Endgame patching of the gpio_remove() semantics initiated
by Abdoulaye Berthe. It is not accepted by the system that
the removal of a GPIO chip fails during e.g. reboot or
shutdown, and therefore the return value has now painfully
been refactored away. For special cases like GPIO expanders
on a hot-pluggable bus like USB, we may later add some
gpiochip_try_remove() call, but for the cases we have now,
return values are moot.
- Some incremental refactoring of the gpiolib core and ACPI
GPIO library for more descriptor usage.
- Refactor the chained IRQ handler set-up method to handle
also threaded, nested interrupts and set up the parent IRQ
correctly. Switch STMPE and TC3589x drivers to use this
registration method.
- Add a .irq_not_threaded flag to the struct gpio_chip, so
that also GPIO expanders that block but are still not
using threaded IRQ handlers.
- New drivers for the ARM64 X-Gene SoC GPIO controller.
- The syscon GPIO driver has been improved to handle the
"DSP GPIO" found on the TI Keystone 2 SoC:s.
- ADNP driver switched to use gpiolib irqchip helpers.
- Refactor the DWAPB driver to support being instantiated
from and MFD cell (platform device).
- Incremental feature improvement in the Zynq, MCP23S08,
DWAPB, OMAP, Xilinx and Crystalcove drivers.
- Various minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8InA
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO changes from Linus Walleij:
"This is the bulk of GPIO changes for the v3.18 development cycle:
- Increase the default ARCH_NR_GPIO from 256 to 512. This was done
to avoid having a custom <asm/gpio.h> header for the x86
architecture - GPIO is custom and complicated enough as it is
already! We want to move to a radix to store the descriptors going
forward, and finally get rid of this fixed array size altogether.
- Endgame patching of the gpio_remove() semantics initiated by
Abdoulaye Berthe. It is not accepted by the system that the
removal of a GPIO chip fails during eg reboot or shutdown, and
therefore the return value has now painfully been refactored away.
For special cases like GPIO expanders on a hot-pluggable bus like
USB, we may later add some gpiochip_try_remove() call, but for the
cases we have now, return values are moot.
- Some incremental refactoring of the gpiolib core and ACPI GPIO
library for more descriptor usage.
- Refactor the chained IRQ handler set-up method to handle also
threaded, nested interrupts and set up the parent IRQ correctly.
Switch STMPE and TC3589x drivers to use this registration method.
- Add a .irq_not_threaded flag to the struct gpio_chip, so that also
GPIO expanders that block but are still not using threaded IRQ
handlers.
- New drivers for the ARM64 X-Gene SoC GPIO controller.
- The syscon GPIO driver has been improved to handle the "DSP GPIO"
found on the TI Keystone 2 SoC:s.
- ADNP driver switched to use gpiolib irqchip helpers.
- Refactor the DWAPB driver to support being instantiated from and
MFD cell (platform device).
- Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
Xilinx and Crystalcove drivers.
- Various minor fixes"
* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
gpio: pch: Build context save/restore only for PM
pinctrl: abx500: get rid of unused variable
gpio: ks8695: fix 'else should follow close brace '}''
gpio: stmpe: add verbose debug code
gpio: stmpe: fix up interrupt enable logic
gpio: staticize xway_stp_init()
gpio: handle also nested irqchips in the chained handler set-up
gpio: set parent irq on chained handlers
gpiolib: irqchip: use irq_find_mapping while removing irqchip
gpio: crystalcove: support virtual GPIO
pinctrl: bcm281xx: make Kconfig dependency more strict
gpio: kona: enable only on BCM_MOBILE or for compile testing
gpio, bcm-kona, LLVMLinux: Remove use of __initconst
gpio: Fix ngpio in gpio-xilinx driver
gpio: dwapb: fix pointer to integer cast
gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
gpio: xgene: Fix missing spin_lock_init()
gpio: ks8695: fix switch case indentation
gpiolib: add irq_not_threaded flag to gpio_chip
...
With the introduction of the new keyboard backlight
implementation, the *_timeout_store function is
broken, as it only supports the first kbd_type.
This patch adapts such function for the new kbd_type,
as well as converts from using sscanf to kstrtoint.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the HCI/SCI read/write functions are returning
the status of the ACPI call and also assigning the
returned value of the HCI/SCI function, however, only
the HCI/SCI status is being checked.
This patch changes such functions, returning the value
of the HCI/SCI function instead of the ACPI call status,
eliminating one parameter, and returning something
useful that indeed is being checked.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The return codes are split in between HCI/SCI prefixes,
but they are shared (used) by both interfaces, mixing
hci_read/write calls with SCI_* return codes, and
sci_read/write calls with HCI_* ones.
This patch changes the prefix of the return codes
definitions, dropping the HCI/SCI naming and instead
replacing it with TOS (for TOShiba).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function name hci_raw was used before to reflect
a raw (read/write) call to Toshiba's Hardware
Configuration Interface (HCI), however, since the
introduction of the System Configuration Interface
(SCI), that "name" no longer applies.
This patch changes the name of that function to
tci_raw (for Toshiba Configuration Interface), and
change the comments about it.
Also, the HCI_WORDS definition was changed to TCI_RAW,
to better reflect that we're no longer using pure HCI
calls, but a combination of HCI and SCI, which form
part of the Toshiba Configuration Interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Without this patch, dell-wmi is trying to access elements of dynamically
allocated array without checking the array size. This can lead to memory
corruption or a kernel panic. This patch adds the missing checks for
array size.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch fix spelling typos found in Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Handle errors immediately in eeepc_register_rfkill_notifier and
eeepc_unregister_rfkill_notifier. This clears up the control flow for the
reader. It also removes unnecessary indentation.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The result of set_acpi is left unchecked, but it may return errors. If
one occurs, send the error to the caller. There's no reason to lie about
it, if set_acpi fails.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In get_cpufv the return value of get_acpi is stored in the cpufv struct.
Right before this value is checked for errors, it is and'ed with 0xff.
This means c->cur can never be less than zero. Besides that, the actual
error value is ignored.
c->num is also and'ed with 0xff, which means we can ignore values below
zero.
Check the result of get_acpi() right away. While at it, propagate the
error if we got one.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In the instantiation of the fan1_input device attribute, NULL is passed
as set function to store_sys_hwmon. The function pointer is never
checked before dereferencing it. This is fine if we can guarantee that
it will never be called with an invalid pointer, but we can't. If
someone from user space decides to change the permissions on this
attribute and write to it, kernel will crash.
Introduce EEEPC_CREATE_SENSOR_ATTR_RO() to instantiate a read-only
attribute, and declare fan1_input with it. This ensures store_sys_hwmon
is never called with NULL parameters. If someone tries to write the
attribute, the system will at least keep its sanity.
This also causes EEEPC_CREATE_SENSOR_ATTR() to be only used for R/W
attributes.This enables us to drop the _mode argument from the macro
and use DEVICE_ATTR_RW() internally while we're at it. Append _RW to the
name for readability.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull out EEEPC_SENSOR_STORE_FUNC and EEEPC_SENSOR_SHOW_FUNC. These
macros define functions that call store_sys_hwmon() and show_sys_hwmon()
respectively. This helps prevent duplication later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The disp attribute is write-only, but sysfs doesn't know this. Currently
show_sys_acpi() is mimicking sysfs behavior, if the underlying acpi call
should fail. This was introduced in 6dff29b63a "eeepc-laptop:
disp attribute should be write-only". This is not ideal; behaving like
sysfs is better left to sysfs.
Introduce EEEPC_CREATE_DEVICE_ATTR_WO() to instantiate a write-only
attribute, and declare the disp attribute with it. Sysfs makes sure
userspace can only write to disp at all times. This removes the need for
mimicking the sysfs behavior in show_sys_acpi() and store_sys_acpi(),
but we'll stick with -EIO, as changing sysfs return values should not be
taken lightly.
This change also causes EEEPC_CREATE_DEVICE_ATTR() to be used only for
R/W attributes. This enables us to drop the _mode argument from the
macro and use DEVICE_ATTR_RW() internally while we're at it. Append _RW
to the name for readability.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull out macros EEEPC_ACPI_STORE_FUNC and EEEPC_ACPI_SHOW_FUNC. These
macros define functions that call store_sys_acpi() and show_sys_acpi()
respectively. This helps prevent duplication later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Device attributes are instantiated manually, while we have DEVICE_ATTR*
macros available to do much of the work for us. Let's use them.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The eeepc-laptop driver follows the function naming convention
<action>_<attrname>(), while the sysfs macros are built around the
convention <attrname>_<action>(). Rename the sysfs functions to the
convention used by sysfs. This makes it easier to use the available API
later on.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Correct indentation and brace usage to comply with
Documentation/CodingStyle.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.
Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
parse_arg() has three possible return values:
-EINVAL if sscanf(), in short, fails;
zero if "count" is zero; and
"count" in all other cases
But "count" will never be zero. See, parse_arg() is called by the
various store functions. And the callchain of these functions starts
with sysfs_kf_write(). And that function checks for a zero "count". So
we can stop checking for a zero "count", drop the "count" argument
entirely, and transform parse_arg() into a function that returns zero on
success or a negative error. That, in turn, allows to make those store
functions just return "count" on success. The net effect is that the
code becomes a bit easier to understand.
A nice side effect is that this GCC warning is silenced too:
drivers/platform/x86/eeepc-laptop.c: In function ‘store_sys_acpi’:
drivers/platform/x86/eeepc-laptop.c:279:10: warning: ‘value’ may be used uninitialized in this function [-Wmaybe-uninitialized]
int rv, value;
Which is, of course, the reason to have a look at parse_arg().
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There is no need to initialize the error since it is going to be assigned
with the return status of at least on of the device_create_file() call.
We can return directly in case the first file creation fails.
All the labels for goto can be removed (along with the gotos) as well.
Tell the compiler that the failures are unlikely so it can create better
binaries.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI_SUCCESS is defined as:
#define ACPI_SUCCESS(a) (!(a))
There is no need for the the double ! since there is already a macro
defined for failures: ACPI_FAILURE()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fixed 22 similar coding style issues: "ERROR: spaces required around that '?'"
Signed-off-by: Jan van den Berg <janvdberg@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Newer Toshiba models now come with a new (and different) keyboard
backlight implementation with three modes of operation: TIMER,
ON and OFF, and the LED is now controlled internally by the firmware.
This patch adds support for that type of backlight, changing the
existing code to accomodate the new implementation.
The timeout value range is now 1-60 seconds, and the accepted
modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8 (ON) and 10 (OFF),
this adds two new entries kbd_type and available_kbd_modes,
the first shows the keyboard type and the latter shows the
supported modes depending on the keyboard type.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function toshiba_touchpad_store is not checking
for invalid values and simply returns silently.
This patch checks for invalid values and returns accordingly.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Toshiba models with illumination support set a different
value on the returned codes, thus not allowing the illumination
LED to be registered, where it should be.
This patch removes a check from toshiba_illumination_available
function to allow such models to register the illumination LED.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Appart from reporting hotkeys, the INFO method is used
as a system wide event notifier for hardware or
software changes.
This patch adds additional "events" to the keymap list,
ignored by now, until we find them a good use.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fujitsu backlight and hotkey devices have ACPI drivers.
The PNP MODULE_DEVICE_TABLE in fujitsu-laptop driver is just used as an
indicator for module autoloading, but this is wrong because what we
need is ACPI module device table instead, because the driver is probing
ACPI devices.
Thus remove those IDs from ACPI PNP scan handler list as we don't
have a PNP driver for them, and convert the fujitsu-laptop PNP
MODULE_DEVICE_TABLE to ACPI MODULE_DEVICE_TABLE.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81971
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Dirk Griesbach <spamthis@freenet.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code just returns -EINVAL because mode can't be equal to
both 1 and 2.
Also this function is messy so I have cleaned it up:
1) Remove initializers like "int time = -1". Initializing variables to
garbage values turns off GCC's uninitialized variable warnings so it
can lead to bugs.
2) Use kstrtoint() instead of sscanf().
3) Use SCI_KBD_MODE_FNZ and SCI_KBD_MODE_AUTO instead of magic numbers 1
and 2.
4) Don't check for "mode == -1" because that can't happen.
5) Preserve the error code from toshiba_kbd_illum_status_set().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On the Toshiba Tecra Z40, after a suspend-to-disk, some FN hotkeys
driven by toshiba_acpi are not functional.
Calling the ACPI object ENAB on resume makes them back alive.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This is a follow-up patch to commit 49458e8308 ("ideapad-laptop:
Constify DMI table and other r/o variables") to do what its commit
message says. The actual commit differs from the patch posted at
https://www.mail-archive.com/platform-driver-x86@vger.kernel.org/msg05340.html
significantly, probably due to a bad merge conflict resolution. Fix up
the mess and constify the DMI table for real and fix the bogus
double-const of ideapad_rfk_data[].
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
I've received a bug report from a user that the touchpad control part
of the ideapad-laptop ACPI interface does work for him on his
"Lenovo Yoga 2 13", and that this patch causes a regression for him.
Since it did not work for me when I had a "Lenovo Yoga 2 11" in my own
hands (loaned from a friend). It seems that this is a bit of hit and miss.
Since the result of having a false positive here is worse, then the minor
annoyance of a false touchpad disabled messages being shown after suspend /
resume on models (or is it firmware versions?) where the interface does not
work, simply revert the patch.
This reverts commit f79a901331.
Reported-by: GOESSEL Guillaume <g_goessel@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Makefile and Kconfig build support patch for the newly introduced
kernel module toshiba_haps.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This driver adds support for the built-in accelereometer found
on recent Toshiba laptops with HID TOS620A.
This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.
Also provides sysfs entries to get/set the desired protection
level and reseting the HDD protection interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Not all HW supporting WMAX method will support the HDMI mux feature.
Explicitly quirk the HW that does support it.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table
and the ideapad_attribute_group attribute group. There's no need to have
them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Change the name of the hwmon interface from "compal-laptop" to "compal".
A dash is an invalid character for a hwmon name and caused the call to
hwmon_device_register_with_groups() to fail.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Toshiba Qosmio X75-A series models also come with
the new keymap layout.
This patch adds this model to the alt_keymap_dmi list,
along with an extra key found on these models.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some Toshiba models (most notably Qosmios) come with an
incomplete backlight method where the AML code doesn't
check for write or read commands and always returns
HCI_SUCCESS and the actual brightness (and in some
cases the max brightness), thus allowing the backlight
interface to be registered without write support.
This patch changes the set_lcd_brightness function,
checking the returned values for values greater than
zero to avoid registering a broken backlight interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
If this is going away, it won't be in 2012.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Yoga models don't offer touchpad ctrl through the ideapad interface, causing
ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These variables don't need to be visible outside of this compilation
unit, make them static.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata,
as snd_ctl_new1() will copy the relevant parts, so there is no need to
keep the master copies around after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released afterwards -- roughly 1.5 kB.
In turn, the callback functions can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These functions are only called from other initialization routines, so
can be marked __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI
tables. There's no need to have them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is already marked as __initconst, so can be the callback
functions as they're only used in that context.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.
Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Quite a lot of code and data of acer-wmi.c is only ever used during
initialization. Mark those accordingly -- and constify, where
appropriate -- so the memory can be released afterwards.
All in all those changes move ~10 kB of code and data to the .init
sections, marking them for release after initialization has finished.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released appropriately. In turn, the
callback function can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP
to get rid of the following warnings:
../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function]
../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
sparse_keymap_setup() will make a copy of the keymap, so we can release
the master copy after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch removes the null test on block. block is initialized at the
beginning of the function to &wblock->gblock. Since wblock is
dereferenced prior to the null test, wblock must be a valid pointer,
and &wblock->gblock cannot be null.
The following Coccinelle script is used for detecting the change:
@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@
*e = &f->g
<+...
f->y
...+>
*if (e != NULL || ...)
S1 else S2
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
As reported here: https://bugs.launchpad.net/bugs/1277959
the X550CL needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Wifi will be controlled by asus-wmi driver when wapf > 0
So, controls the wifi-led when wapf > 0
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
When bl_power support got added to asus-wmi, the error handling for it was
written to ignore -ENODEV, to avoid not registering a backlight interface for
models which have no bl_power control, but do have brightness control.
At the same time the error handling for brightness_max was modified to do the
same, this is wrong, when there is no brightness_max asus-wmi should not
register a backlight interface.
Note the caller of asus_wmi_backlight_init already special cases -ENODEV,
and will not cause the wmi driver regristration to fail because of a
-ENODEV return from asus_wmi_backlight_init.
https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some Asus motherboards for desktop PC-s export an acpi-video interface
advertising backlight support. Test the dmi chassis-type and tell acpi-video
to not register a backlight interface on desktops.
https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It seems that the same problems which lead to adding an rfkill blacklist and
putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13
and Lenovo Yoga 2 Pro too:
https://bugzilla.redhat.com/show_bug.cgi?id=1021036https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612
Testing has shown that the firmware rfkill settings are persistent over
reboots. So blacklisting the driver is not good enough, if the wifi is blocked
at the firmware level the wifi needs to be explictly unblocked through the
ideapad-laptop interface.
And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices
with hardware kill switch reports the hardware switch state, needs to be
explictly set to 1 (radio enabled / not blocked).
So this patch does 3 things to get proper rfkill handling on these models:
1) Instead of blacklisting the rfkill functionality, which means that people
with a firmware blocked wifi get stuck in that situation, ignore the value
reported by the not present hardware rfkill switch, as this is what is causing
ideapad-laptop to wrongly report all radios as hardware blocks. But do register
the rfkill interfaces so that the user can soft [un]block them.
2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1
3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2
series is affected.
Yoga 2 11:
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Yoga 2 13:
Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044>
Yoga 2 Pro:
Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
