Commit Graph

773 Commits

Author SHA1 Message Date
Andrea Arcangeli 0664e57ff0 mm: gup: kvm use get_user_pages_unlocked
Use the more generic get_user_pages_unlocked which has the additional
benefit of passing FAULT_FLAG_ALLOW_RETRY at the very first page fault
(which allows the first page fault in an unmapped area to be always able
to block indefinitely by being allowed to release the mmap_sem).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:05 -08:00
Richard Cochran 2eebdde652 timecounter: keep track of accumulated fractional nanoseconds
The current timecounter implementation will drop a variable amount
of resolution, depending on the magnitude of the time delta. In
other words, reading the clock too often or too close to a time
stamp conversion will introduce errors into the time values. This
patch fixes the issue by introducing a fractional nanosecond field
that accumulates the low order bits.

Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30 18:29:27 -05:00
Paolo Bonzini dbaff30940 kvm: warn on more invariant breakage
Modifying a non-existent slot is not allowed.  Also check that the
first loop doesn't move a deleted slot beyond the used part of
the mslots array.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-28 10:01:25 +01:00
Paolo Bonzini efbeec7098 kvm: fix sorting of memslots with base_gfn == 0
Before commit 0e60b0799f (kvm: change memslot sorting rule from size
to GFN, 2014-12-01), the memslots' sorting key was npages, meaning
that a valid memslot couldn't have its sorting key equal to zero.
On the other hand, a valid memslot can have base_gfn == 0, and invalid
memslots are identified by base_gfn == npages == 0.

Because of this, commit 0e60b0799f broke the invariant that invalid
memslots are at the end of the mslots array.  When a memslot with
base_gfn == 0 was created, any invalid memslot before it were left
in place.

This can be fixed by changing the insertion to use a ">=" comparison
instead of "<=", but some care is needed to avoid breaking the case
of deleting a memslot; see the comment in update_memslots.

Thanks to Tiejun Chen for posting an initial patch for this bug.

Reported-by: Jamie Heilman <jamie@audible.transient.net>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-28 10:01:17 +01:00
Linus Torvalds 66dcff86ba 3.19 changes for KVM:
- spring cleaning: removed support for IA64, and for hardware-assisted
 virtualization on the PPC970
 - ARM, PPC, s390 all had only small fixes
 
 For x86:
 - small performance improvements (though only on weird guests)
 - usual round of hardware-compliancy fixes from Nadav
 - APICv fixes
 - XSAVES support for hosts and guests.  XSAVES hosts were broken because
 the (non-KVM) XSAVES patches inadvertently changed the KVM userspace
 ABI whenever XSAVES was enabled; hence, this part is going to stable.
 Guest support is just a matter of exposing the feature and CPUID leaves
 support.
 
 Right now KVM is broken for PPC BookE in your tree (doesn't compile).
 I'll reply to the pull request with a patch, please apply it either
 before the pull request or in the merge commit, in order to preserve
 bisectability somewhat.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJUkpg+AAoJEL/70l94x66DUmoH/jzXYkptSW9NGgm79KqxGJlD
 lzLnLBkitVvx++Mz5YBhdJEhKKLUlCtifFT1zPJQ/pthQhIRSaaAwZyNGgUs5w5x
 yMGKHiPQFyZRbmQtZhCInW0BftJoYHHciO3nUfHCZnp34My9MP2D55W7/z+fYFfQ
 DuqBSE9ThyZJtZ4zh8NRA9fCOeuqwVYRyoBs820Wbsh4cpIBoIK63Dg7k+CLE+ZV
 MZa/mRL6bAfsn9W5bnOUAgHJ3SPznnWbO3/g0aV+roL/5pffblprJx9lKNR08xUM
 6hDFLop2gDehDJesDkY/o8Ckp1hEouvfsVpSShry4vcgtn0hgh2O5/6Orbmj6vE=
 =Zwq1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "3.19 changes for KVM:

   - spring cleaning: removed support for IA64, and for hardware-
     assisted virtualization on the PPC970

   - ARM, PPC, s390 all had only small fixes

  For x86:
   - small performance improvements (though only on weird guests)
   - usual round of hardware-compliancy fixes from Nadav
   - APICv fixes
   - XSAVES support for hosts and guests.  XSAVES hosts were broken
     because the (non-KVM) XSAVES patches inadvertently changed the KVM
     userspace ABI whenever XSAVES was enabled; hence, this part is
     going to stable.  Guest support is just a matter of exposing the
     feature and CPUID leaves support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits)
  KVM: move APIC types to arch/x86/
  KVM: PPC: Book3S: Enable in-kernel XICS emulation by default
  KVM: PPC: Book3S HV: Improve H_CONFER implementation
  KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register
  KVM: PPC: Book3S HV: Remove code for PPC970 processors
  KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions
  KVM: PPC: Book3S HV: Simplify locking around stolen time calculations
  arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function
  arch: powerpc: kvm: book3s_pr.c: Remove unused function
  arch: powerpc: kvm: book3s.c: Remove some unused functions
  arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function
  KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked
  KVM: PPC: Book3S HV: ptes are big endian
  KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI
  KVM: PPC: Book3S HV: Fix KSM memory corruption
  KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI
  KVM: PPC: Book3S HV: Fix computation of tlbie operand
  KVM: PPC: Book3S HV: Add missing HPTE unlock
  KVM: PPC: BookE: Improve irq inject tracepoint
  arm/arm64: KVM: Require in-kernel vgic for the arch timers
  ...
2014-12-18 16:05:28 -08:00
Paolo Bonzini 333bce5aac Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot
problems, clarifies VCPU init, and fixes a regression concerning the
 VGIC init flow.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUjsVhAAoJEEtpOizt6ddy5rIH/1V/YVwhprC55YqdHelU9Qu2
 Muzsx+7F71NxC7xgMGFqPD1YrPR+hxvoPhy+ADOBlvcqlolrkDnV9I+8e3geaYNc
 nZ/yEnoGTtbAggiS1smx7usBv34Z88Sd5txNjmj1cmHBy+VOWlyidWMkGBTsfBRe
 mVc61BDUfyC47udgRHXhwS80sbHLJHElmADisFOVmQNBYwwiHiTdx0hMBMnHcC3Y
 /3T0tKxHdeTISnmA+J+n7TcChtTIM4xqC6kwf3rw3b7XX8gdtTKylDHX2GLAg646
 RdebAG2twmGpIc6SxXZbo38f3oY9OFo1Le5xZGa6iUjD56VDw/e4wg4iA2juo0Y=
 =J2Ut
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.19-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot
problems, clarifies VCPU init, and fixes a regression concerning the
VGIC init flow.

Conflicts:
	arch/ia64/kvm/kvm-ia64.c [deleted in HEAD and modified in kvmarm]
2014-12-15 13:06:40 +01:00
Christoffer Dall 05971120fc arm/arm64: KVM: Require in-kernel vgic for the arch timers
It is curently possible to run a VM with architected timers support
without creating an in-kernel VGIC, which will result in interrupts from
the virtual timer going nowhere.

To address this issue, move the architected timers initialization to the
time when we run a VCPU for the first time, and then only initialize
(and enable) the architected timers if we have a properly created and
initialized in-kernel VGIC.

When injecting interrupts from the virtual timer to the vgic, the
current setup should ensure that this never calls an on-demand init of
the VGIC, which is the only call path that could return an error from
kvm_vgic_inject_irq(), so capture the return value and raise a warning
if there's an error there.

We also change the kvm_timer_init() function from returning an int to be
a void function, since the function always succeeds.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15 11:50:42 +01:00
Christoffer Dall ca7d9c829d arm/arm64: KVM: Initialize the vgic on-demand when injecting IRQs
Userspace assumes that it can wire up IRQ injections after having
created all VCPUs and after having created the VGIC, but potentially
before starting the first VCPU.  This can currently lead to lost IRQs
because the state of that IRQ injection is not stored anywhere and we
don't return an error to userspace.

We haven't seen this problem manifest itself yet, presumably because
guests reset the devices on boot, but this could cause issues with
migration and other non-standard startup configurations.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15 11:36:21 +01:00
Christoffer Dall 1f57be2895 arm/arm64: KVM: Add (new) vgic_initialized macro
Some code paths will need to check to see if the internal state of the
vgic has been initialized (such as when creating new VCPUs), so
introduce such a macro that checks the nr_cpus field which is set when
the vgic has been initialized.

Also set nr_cpus = 0 in kvm_vgic_destroy, because the error path in
vgic_init() will call this function, and code should never errornously
assume the vgic to be properly initialized after an error.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:10 +01:00
Christoffer Dall c52edf5f8c arm/arm64: KVM: Rename vgic_initialized to vgic_ready
The vgic_initialized() macro currently returns the state of the
vgic->ready flag, which indicates if the vgic is ready to be used when
running a VM, not specifically if its internal state has been
initialized.

Rename the macro accordingly in preparation for a more nuanced
initialization flow.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:05 +01:00
Peter Maydell 6d3cfbe21b arm/arm64: KVM: vgic: move reset initialization into vgic_init_maps()
VGIC initialization currently happens in three phases:
 (1) kvm_vgic_create() (triggered by userspace GIC creation)
 (2) vgic_init_maps() (triggered by userspace GIC register read/write
     requests, or from kvm_vgic_init() if not already run)
 (3) kvm_vgic_init() (triggered by first VM run)

We were doing initialization of some state to correspond with the
state of a freshly-reset GIC in kvm_vgic_init(); this is too late,
since it will overwrite changes made by userspace using the
register access APIs before the VM is run. Move this initialization
earlier, into the vgic_init_maps() phase.

This fixes a bug where QEMU could successfully restore a saved
VM state snapshot into a VM that had already been run, but could
not restore it "from cold" using the -loadvm command line option
(the symptoms being that the restored VM would run but interrupts
were ignored).

Finally rename vgic_init_maps to vgic_init and renamed kvm_vgic_init to
kvm_vgic_map_resources.

  [ This patch is originally written by Peter Maydell, but I have
    modified it somewhat heavily, renaming various bits and moving code
    around.  If something is broken, I am to be blamed. - Christoffer ]

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:15:52 +01:00
Christian Borntraeger 7a72f7a140 KVM: track pid for VCPU only on KVM_RUN ioctl
We currently track the pid of the task that runs the VCPU in vcpu_load.
If a yield to that VCPU is triggered while the PID of the wrong thread
is active, the wrong thread might receive a yield, but this will most
likely not help the executing thread at all.  Instead, if we only track
the pid on the KVM_RUN ioctl, there are two possibilities:

1) the thread that did a non-KVM_RUN ioctl is holding a mutex that
the VCPU thread is waiting for.  In this case, the VCPU thread is not
runnable, but we also do not do a wrong yield.

2) the thread that did a non-KVM_RUN ioctl is sleeping, or doing
something that does not block the VCPU thread.  In this case, the
VCPU thread can receive the directed yield correctly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Rik van Riel <riel@redhat.com>
CC: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
CC: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:13 +01:00
David Hildenbrand eed6e79d73 KVM: don't check for PF_VCPU when yielding
kvm_enter_guest() has to be called with preemption disabled and will
set PF_VCPU.  Current code takes PF_VCPU as a hint that the VCPU thread
is running and therefore needs no yield.

However, the check on PF_VCPU is wrong on s390, where preemption has
to stay enabled in order to correctly process page faults.  Thus,
s390 reenables preemption and starts to execute the guest.  The thread
might be scheduled out between kvm_enter_guest() and kvm_exit_guest(),
resulting in PF_VCPU being set but not being run.  When this happens,
the opportunity for directed yield is missed.

However, this check is done already in kvm_vcpu_on_spin before calling
kvm_vcpu_yield_loop:

        if (!ACCESS_ONCE(vcpu->preempted))
                continue;

so the check on PF_VCPU is superfluous in general, and this patch
removes it.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:12 +01:00
Igor Mammedov 9c1a5d3878 kvm: optimize GFN to memslot lookup with large slots amount
Current linear search doesn't scale well when
large amount of memslots is used and looked up slot
is not in the beginning memslots array.
Taking in account that memslots don't overlap, it's
possible to switch sorting order of memslots array from
'npages' to 'base_gfn' and use binary search for
memslot lookup by GFN.

As result of switching to binary search lookup times
are reduced with large amount of memslots.

Following is a table of search_memslot() cycles
during WS2008R2 guest boot.

                         boot,          boot + ~10 min
                         mostly same    of using it,
                         slot lookup    randomized lookup
                max      average        average
                cycles   cycles         cycles

13 slots      : 1450       28           30

13 slots      : 1400       30           40
binary search

117 slots     : 13000      30           460

117 slots     : 2000       35           180
binary search

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:11 +01:00
Igor Mammedov 0e60b0799f kvm: change memslot sorting rule from size to GFN
it will allow to use binary search for GFN -> memslot
lookups, reducing lookup cost with large slots amount.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:11 +01:00
Igor Mammedov 7f379cff11 kvm: update_memslots: drop not needed check for the same slot
UP/DOWN shift loops will shift array in needed
direction and stop at place where new slot should
be placed regardless of old slot size.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:09 +01:00
Igor Mammedov 5a38b6e6b4 kvm: update_memslots: drop not needed check for the same number of pages
if number of pages haven't changed sorting algorithm
will do nothing, so there is no need to do extra check
to avoid entering sorting logic.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-04 15:29:09 +01:00
Ard Biesheuvel d3fccc7ef8 kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26 14:40:45 +01:00
Christoffer Dall 6b50f54064 arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create()
If we detect another vCPU is running we just exit and return 0 as if we
succesfully created the VGIC, but the VGIC wouldn't actual be created.

This shouldn't break in-kernel behavior because the kernel will not
observe the failed the attempt to create the VGIC, but userspace could
be rightfully confused.

Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26 14:40:44 +01:00
Shannon Zhao 016ed39c54 arm/arm64: KVM: vgic: kick the specific vcpu instead of iterating through all
When call kvm_vgic_inject_irq to inject interrupt, we can known which
vcpu the interrupt for by the irq_num and the cpuid. So we should just
kick this vcpu to avoid iterating through all.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-26 10:19:37 +00:00
Christoffer Dall b1e952b4e4 arm/arm64: vgic: Remove unreachable irq_clear_pending
When 'injecting' an edge-triggered interrupt with a falling edge we
shouldn't clear the pending state on the distributor.  In fact, we
don't, because the check in vgic_validate_injection would prevent us
from ever reaching this bit of code.

Remove the unreachable snippet.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:28 +00:00
Ard Biesheuvel bf4bea8e9a kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:26 +00:00
wanghaibin 7d39f9e32c KVM: ARM: VGIC: Optimize the vGIC vgic_update_irq_pending function.
When vgic_update_irq_pending with level-sensitive false, it is need to
deactivates an interrupt, and, it can go to out directly.
Here return a false value, because it will be not need to kick.

Signed-off-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-11-25 13:57:26 +00:00
Radim Krčmář c274e03af7 kvm: x86: move assigned-dev.c and iommu.c to arch/x86/
Now that ia64 is gone, we can hide deprecated device assignment in x86.

Notable changes:
 - kvm_vm_ioctl_assigned_device() was moved to x86/kvm_arch_vm_ioctl()

The easy parts were removed from generic kvm code, remaining
 - kvm_iommu_(un)map_pages() would require new code to be moved
 - struct kvm_assigned_dev_kernel depends on struct kvm_irq_ack_notifier

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-23 18:33:36 +01:00
Paolo Bonzini 6ef768fac9 kvm: x86: move ioapic.c and irq_comm.c back to arch/x86/
ia64 does not need them anymore.  Ack notifiers become x86-specific
too.

Suggested-by: Gleb Natapov <gleb@kernel.org>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-21 18:02:37 +01:00
Paolo Bonzini 003f7de625 KVM: ia64: remove
KVM for ia64 has been marked as broken not just once, but twice even,
and the last patch from the maintainer is now roughly 5 years old.
Time for it to rest in peace.

Acked-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-20 11:08:33 +01:00
Paolo Bonzini 5cc1502799 kvm: simplify update_memslots invocation
The update_memslots invocation is only needed in one case.  Make
the code clearer by moving it to __kvm_set_memory_region, and
removing the wrapper around insert_memslot.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 12:16:13 +01:00
Paolo Bonzini f2a8103651 kvm: commonize allocation of the new memory slots
The two kmemdup invocations can be unified.  I find that the new
placement of the comment makes it easier to see what happens.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 12:15:34 +01:00
Paolo Bonzini 8593176c67 kvm: memslots: track id_to_index changes during the insertion sort
This completes the optimization from the previous patch, by
removing the KVM_MEM_SLOTS_NUM-iteration loop from insert_memslot.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14 15:40:17 +01:00
Igor Mammedov 063584d443 kvm: memslots: replace heap sort with an insertion sort pass
memslots is a sorted array.  When a slot is changed, heapsort (lib/sort.c)
would take O(n log n) time to update it; an optimized insertion sort will
only cost O(n) on an array with just one item out of order.

Replace sort() with a custom sort that takes advantage of memslots usage
pattern and the known position of the changed slot.

performance change of 128 memslots insertions with gradually increasing
size (the worst case):

      heap sort   custom sort
max:  249747      2500 cycles

with custom sort alg taking ~98% less then original
update time.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14 10:49:04 +01:00
Dominik Dingel 02d5d55b7e KVM: trivial fix comment regarding __kvm_set_memory_region
commit 72dc67a696 ("KVM: remove the usage of the mmap_sem for the protection of the memory slots.")
changed the lock which will be taken. This should be reflected in the function
commentary.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:30 +01:00
Nadav Amit 394457a928 KVM: x86: some apic broadcast modes does not work
KVM does not deliver x2APIC broadcast messages with physical mode.  Intel SDM
(10.12.9 ICR Operation in x2APIC Mode) states: "A destination ID value of
FFFF_FFFFH is used for broadcast of interrupts in both logical destination and
physical destination modes."

In addition, the local-apic enables cluster mode broadcast. As Intel SDM
10.6.2.2 says: "Broadcast to all local APICs is achieved by setting all
destination bits to one." This patch enables cluster mode broadcast.

The fix tries to combine broadcast in different modes through a unified code.

One rare case occurs when the source of IPI has its APIC disabled.  In such
case, the source can still issue IPIs, but since the source is not obliged to
have the same LAPIC mode as the enabled ones, we cannot rely on it.
Since it is a rare case, it is unoptimized and done on the slow-path.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[As per Radim's review, use unsigned int for X2APIC_BROADCAST, return bool from
 kvm_apic_broadcast. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:22 +01:00
Wanpeng Li 571ee1b685 kvm: vfio: fix unregister kvm_device_ops of vfio
After commit 80ce163 (KVM: VFIO: register kvm_device_ops dynamically),
kvm_device_ops of vfio can be registered dynamically. Commit 3c3c29fd
(kvm-vfio: do not use module_init) move the dynamic register invoked by
kvm_init in order to fix broke unloading of the kvm module. However,
kvm_device_ops of vfio is unregistered after rmmod kvm-intel module
which lead to device type collision detection warning after kvm-intel
module reinsmod.

    WARNING: CPU: 1 PID: 10358 at /root/cathy/kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:3289 kvm_init+0x234/0x282 [kvm]()
    Modules linked in: kvm_intel(O+) kvm(O) nfsv3 nfs_acl auth_rpcgss oid_registry nfsv4 dns_resolver nfs fscache lockd sunrpc pci_stub bridge stp llc autofs4 8021q cpufreq_ondemand ipv6 joydev microcode pcspkr igb i2c_algo_bit ehci_pci ehci_hcd e1000e i2c_i801 ixgbe ptp pps_core hwmon mdio tpm_tis tpm ipmi_si ipmi_msghandler acpi_cpufreq isci libsas scsi_transport_sas button dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kvm_intel]
    CPU: 1 PID: 10358 Comm: insmod Tainted: G        W  O   3.17.0-rc1 #2
    Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
     0000000000000cd9 ffff880ff08cfd18 ffffffff814a61d9 0000000000000cd9
     0000000000000000 ffff880ff08cfd58 ffffffff810417b7 ffff880ff08cfd48
     ffffffffa045bcac ffffffffa049c420 0000000000000040 00000000000000ff
    Call Trace:
     [<ffffffff814a61d9>] dump_stack+0x49/0x60
     [<ffffffff810417b7>] warn_slowpath_common+0x7c/0x96
     [<ffffffffa045bcac>] ? kvm_init+0x234/0x282 [kvm]
     [<ffffffff810417e6>] warn_slowpath_null+0x15/0x17
     [<ffffffffa045bcac>] kvm_init+0x234/0x282 [kvm]
     [<ffffffffa016e995>] vmx_init+0x1bf/0x42a [kvm_intel]
     [<ffffffffa016e7d6>] ? vmx_check_processor_compat+0x64/0x64 [kvm_intel]
     [<ffffffff810002ab>] do_one_initcall+0xe3/0x170
     [<ffffffff811168a9>] ? __vunmap+0xad/0xb8
     [<ffffffff8109c58f>] do_init_module+0x2b/0x174
     [<ffffffff8109d414>] load_module+0x43e/0x569
     [<ffffffff8109c6d8>] ? do_init_module+0x174/0x174
     [<ffffffff8109c75a>] ? copy_module_from_user+0x39/0x82
     [<ffffffff8109b7dd>] ? module_sect_show+0x20/0x20
     [<ffffffff8109d65f>] SyS_init_module+0x54/0x81
     [<ffffffff814a9a12>] system_call_fastpath+0x16/0x1b
    ---[ end trace 0626f4a3ddea56f3 ]---

The bug can be reproduced by:

    rmmod kvm_intel.ko
    insmod kvm_intel.ko

without rmmod/insmod kvm.ko
This patch fixes the bug by unregistering kvm_device_ops of vfio when the
kvm-intel module is removed.

Reported-by: Liu Rongrong <rongrongx.liu@intel.com>
Fixes: 3c3c29fd0d
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-24 13:30:47 +02:00
Quentin Casasnovas 3d32e4dbe7 kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.

This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.

This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.

This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.

Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.

Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-24 13:30:37 +02:00
Linus Torvalds 8a5de18239 Second batch of changes for KVM/{arm,arm64} for 3.18
- Support for 48bit IPA and VA (EL2)
 - A number of fixes for devices mapped into guests
 - Yet another VGIC fix for BE
 - A fix for CPU hotplug
 - A few compile fixes (disabled VGIC, strict mm checks)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUQkyTAAoJECPQ0LrRPXpDwrUP/1WbELgB74W35CJ1zIc4KuBi
 unP1muW3QAr9Vmp/KovRKyLKFiRaTRlQsszaI78f4ZQ++0vzivU8dZwV81Gn1y/v
 0qF63OB0UYsOgXMRrh5JTEqzUyNyNBLUH+FAQiEO/srDoH5WLp3Zq7ThjzjwGn7Q
 K2ArxFiml+p2BGIGKWe3XIrxNgpW4oWhfe1kW4WU7sshuJlut3Nee+q2lSIg9mZx
 2VXYnLNzSsHizgQHuVEyXIqn8HA5FSCvjBYIUcLERlWB0I66WvzOqg9rH/BmNNR2
 H+cBDY+9D8KBUBG9zZSG7hZ0mAONKcOnxGZWGzte3Oi7FMZkB3Y/zrIs0na4iB5Y
 FxE8j+2qclZk9fkHQ7wn9Ws8hpGR2OrFlc2O5ZoBJJ2KJ4wMRHMeEbYRBCRQbTCN
 +81SUW7mh2j/La0JBqZ6DhhTiymUdIB+6v78im9WGlHsFRAIHBt0Q0u/pIyY+GJs
 OH7FoswI3vF5iODlHeRO1yjaO3rkj+IJwqTuUuhAIGu9+qnof3ge+eM1cOqrudNa
 u2kDz+BC21+Q8dflOF99Ryz7cMWqMiwtR+N+OUYpxc7RL7mCeHVANJxdWIFHKa2Z
 XJaHmbKjmw8AoR0fbS6YWOl2xmIhqU+FAngI+mow/Hz4pJDpR2K3w17ASXIVVQVX
 go2bvGHONkdn8Ji3Asap
 =3fl5
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

Pull second batch of changes for KVM/{arm,arm64} from Marc Zyngier:
 "The most obvious thing is the sizeable MMU changes to support 48bit
  VAs on arm64.

  Summary:

   - support for 48bit IPA and VA (EL2)
   - a number of fixes for devices mapped into guests
   - yet another VGIC fix for BE
   - a fix for CPU hotplug
   - a few compile fixes (disabled VGIC, strict mm checks)"

[ I'm pulling directly from Marc at the request of Paolo Bonzini, whose
  backpack was stolen at Düsseldorf airport and will do new keys and
  rebuild his web of trust.    - Linus ]

* tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
  arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs
  arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abort
  arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE
  arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2
  arm/arm64: KVM: map MMIO regions at creation time
  arm64: kvm: define PAGE_S2_DEVICE as read-only by default
  ARM: kvm: define PAGE_S2_DEVICE as read-only by default
  arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap
  arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()
  arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages
  ARM: KVM: fix vgic-disabled build
  arm: kvm: fix CPU hotplug
2014-10-18 14:32:31 -07:00
Christoffer Dall 2df36a5dd6 arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs
The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we
store these as an array of two such registers on the vgic vcpu struct.
However, we access them as a single 64-bit value or as a bitmap pointer
in the generic vgic code, which breaks BE support.

Instead, store them as u64 values on the vgic structure and do the
word-swapping in the assembly code, which already handles the byte order
for BE systems.

Tested-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-16 10:57:41 +02:00
Linus Torvalds 23971bdfff IOMMU Updates for Linux v3.18
This pull-request includes:
 
 	* Change in the IOMMU-API to convert the former iommu_domain_capable
 	  function to just iommu_capable
 
 	* Various fixes in handling RMRR ranges for the VT-d driver (one fix
 	  requires a device driver core change which was acked
 	  by Greg KH)
 
 	* The AMD IOMMU driver now assigns and deassigns complete alias groups
 	  to fix issues with devices using the wrong PCI request-id
 
 	* MMU-401 support for the ARM SMMU driver
 
 	* Multi-master IOMMU group support for the ARM SMMU driver
 
 	* Various other small fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPNxYAAoJECvwRC2XARrjMwMP/RLSr+oA31rGVjLXcmcCHl7Q
 Uj7xpcnG19qB0aqNR1JeJuZNkK/tw44pE353MQPbz4N9UVUiogklGIVD1iJvFV53
 0qm84bvpDJIof4aP35B3H3Umft2USTn/lmsQg/RklQcNTW8DzNj63b8BTNR7k/GL
 G7bLg7F1BUCl0shZCCsFspOIulQPAJYN2OvHlfYBav/bfDvfouQ3lrV+loGrK44r
 F2Hmp+imXlIhUCjfbiWz6wKFxvPrxZx482vm2pXBCSnXEdW4/fz6nf9VHUK/Cfsq
 JAimY1CfiDo1aqH9/yVHUOw5SD/NYOXq6E5bFPg/WENbipbbae5cK2u6PX5MMBAn
 CG4BM8l9xicfGPqgn5YFSRY/6qC6K7NlxMnt9U8l18QIkDVDqEtUgJQISJuce7wx
 FWx6eSWaxpIe5yhq19/h2ELalUUyR/fPq+UXXjYDL1kLV/vcvC/lC3mbNAQU93zU
 WK0bG2tDg88JHavc25Ewa2aOn4BVM2BpwuLbYlgQReaEmsQRnEPgtmRNyLJHqbFE
 wwpCj8pBWdufsJWRyvpnXQ+CfA7oSz4e7hz1G+0/5uiDmagfvg16Ql5JtPmmuLUm
 Kc3dVIiG0s1ewohZIIJETGCqprQbCSqs8CCQqB6p2zDBWFKpNT7F38lm/KlehkCz
 JpAiI7Y2K9Jejp0VIPrt
 =OMOt
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This pull-request includes:

   - change in the IOMMU-API to convert the former iommu_domain_capable
     function to just iommu_capable

   - various fixes in handling RMRR ranges for the VT-d driver (one fix
     requires a device driver core change which was acked by Greg KH)

   - the AMD IOMMU driver now assigns and deassigns complete alias
     groups to fix issues with devices using the wrong PCI request-id

   - MMU-401 support for the ARM SMMU driver

   - multi-master IOMMU group support for the ARM SMMU driver

   - various other small fixes all over the place"

* tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/vt-d: Work around broken RMRR firmware entries
  iommu/vt-d: Store bus information in RMRR PCI device path
  iommu/vt-d: Only remove domain when device is removed
  driver core: Add BUS_NOTIFY_REMOVED_DEVICE event
  iommu/amd: Fix devid mapping for ivrs_ioapic override
  iommu/irq_remapping: Fix the regression of hpet irq remapping
  iommu: Fix bus notifier breakage
  iommu/amd: Split init_iommu_group() from iommu_init_device()
  iommu: Rework iommu_group_get_for_pci_dev()
  iommu: Make of_device_id array const
  amd_iommu: do not dereference a NULL pointer address.
  iommu/omap: Remove omap_iommu unused owner field
  iommu: Remove iommu_domain_has_cap() API function
  IB/usnic: Convert to use new iommu_capable() API function
  vfio: Convert to use new iommu_capable() API function
  kvm: iommu: Convert to use new iommu_capable() API function
  iommu/tegra: Convert to iommu_capable() API function
  iommu/msm: Convert to iommu_capable() API function
  iommu/vt-d: Convert to iommu_capable() API function
  iommu/fsl: Convert to iommu_capable() API function
  ...
2014-10-15 07:23:49 +02:00
Ard Biesheuvel c40f2f8ff8 arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap
Add support for read-only MMIO passthrough mappings by adding a
'writable' parameter to kvm_phys_addr_ioremap. For the moment,
mappings will be read-write even if 'writable' is false, but once
the definition of PAGE_S2_DEVICE gets changed, those mappings will
be created read-only.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 13:07:37 +02:00
Linus Torvalds 80213c03c4 PCI changes for the v3.18 merge window:
Enumeration
     - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
     - Enable Config Request Retry Status when supported (Rajat Jain)
     - Add generic domain handling (Catalin Marinas)
     - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)
 
   Resource management
     - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
     - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)
 
   PCI device hotplug
     - Prevent NULL dereference during pciehp probe (Andreas Noever)
     - Move _HPP & _HPX handling into core (Bjorn Helgaas)
     - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
     - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
     - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
     - Fix wait time in pciehp timeout message (Yinghai Lu)
     - Add more pciehp Slot Control debug output (Yinghai Lu)
     - Stop disabling pciehp notifications during init (Yinghai Lu)
 
   MSI
     - Remove arch_msi_check_device() (Alexander Gordeev)
     - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
     - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
     - Remove unused kobject from struct msi_desc (Yijing Wang)
     - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
     - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
     - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
     - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
     - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)
 
   Power management
     - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
     - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)
 
   AER
     - Add additional AER error strings (Gong Chen)
     - Make <linux/aer.h> standalone includable (Thierry Reding)
 
   Virtualization
     - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
     - Add ACS quirk for Intel 10G NICs (Alex Williamson)
     - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
     - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
     - Add device flag helpers (Ethan Zhao)
     - Assume all Mellanox devices have broken INTx masking (Gavin Shan)
 
   Generic host bridge driver
     - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
     - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
     - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
     - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
     - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
     - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
     - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
     - Add arm64 architectural support for PCI (Liviu Dudau)
 
   APM X-Gene
     - Add APM X-Gene PCIe driver (Tanmay Inamdar)
     - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)
 
   Freescale i.MX6
     - Probe in module_init(), not fs_initcall() (Lucas Stach)
     - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)
 
   Marvell MVEBU
     - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Make sure the PCIe PLL is really reset (Eric Yuen)
     - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
     - Fix extended configuration space mapping (Peter Daifuku)
     - Implement resource hierarchy (Thierry Reding)
     - Clear CLKREQ# enable on port disable (Thierry Reding)
     - Add Tegra124 support (Thierry Reding)
 
   ST Microelectronics SPEAr13xx
     - Pass config resource through reg property (Pratyush Anand)
 
   Synopsys DesignWare
     - Use NULL instead of false (Fabio Estevam)
     - Parse bus-range property from devicetree (Lucas Stach)
     - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
     - Remove pci_assign_unassigned_resources() (Lucas Stach)
     - Check private_data validity in single place (Lucas Stach)
     - Setup and clear exactly one MSI at a time (Lucas Stach)
     - Remove open-coded bitmap operations (Lucas Stach)
     - Fix configuration base address when using 'reg' (Minghuan Lian)
     - Fix IO resource end address calculation (Minghuan Lian)
     - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
     - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
     - Add support for v3.65 hardware (Murali Karicheri)
     - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)
 
   TI Keystone
     - Add TI Keystone PCIe driver (Murali Karicheri)
     - Limit MRSS for all downstream devices (Murali Karicheri)
     - Assume controller is already in RC mode (Murali Karicheri)
     - Set device ID based on SoC to support multiple ports (Murali Karicheri)
 
   Xilinx AXI
     - Add Xilinx AXI PCIe driver (Srikanth Thokala)
     - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)
 
   Miscellaneous
     - Clean up whitespace (Quentin Lambert)
     - Remove assignments from "if" conditions (Quentin Lambert)
     - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
     - x86: Mark DMI tables as initialization data (Mathias Krause)
     - x86: Move __init annotation to the correct place (Mathias Krause)
     - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
     - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
     - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
     - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
     - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNWmJAAoJEFmIoMA60/r8GncP/3uHRoBrnaF6pv+S1l1p3Fs/
 l1kKH91/IuAAU7VJX8pkNybFqx02topWmiVVXAzqvD01PcRLGCLjPbWl5h+y5/Ja
 CHZH33AwHAmm0kt4BrOSOeHTLJhAigly2zV3P4F8jRIgyaeMoGZ6Ko4tkQUpm21k
 +ohrOd4cxYkmzzCjKwsZZhKnyRNpae8FmTk3VQBPuN8DbhvFPrqo5/+GeAdSZTdS
 HZHpfl2HL4095aY7uBVsZqNkjQyl6SnWwjkjLnuI8q3qA3BLgDZE/Jr8F/MNuW1V
 y01JIjerFWMDFyBIkpg7moYnODy6oP3KvczwYdKGmqsJja+0MQvYhLTwD+R/yTQS
 SewJA0mL3T3EJEfnFYkCiaIX27xIwk/FxHfaKPN91xgx/QM7xCVZNrU2/dXjhoX1
 GqLKxOEaFHhWWTyT5Dj27I0ZcElzFZ3tIwvrHfs8y22oAuAlsAypaUgvUwRfL4CO
 hOj4ITZa0t041sYWqxCoGAA9Fdp8HMzNKKS5F4mhADz4Ad9v6uPCNv/s/RoxVsbm
 jhZOtPYJ0/iCA+kNVX563S8Z3VpfPI+7bBjcj2WKdzW+IlICvOKT+kvwL2Tv/rE7
 w0hrNsbkgGsYbPldMx7LwCavsUtYFuNj0zoU6vkhP2jk6O2Tn5VXDmjrXH0v3iHI
 v03vlUtre0bQ26fzDyLQ
 =4Zv1
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "The interesting things here are:

   - Turn on Config Request Retry Status Software Visibility.  This
     caused hangs last time, but we included a fix this time.
   - Rework PCI device configuration to use _HPP/_HPX more aggressively
   - Allow PCI devices to be put into D3cold during system suspend
   - Add arm64 PCI support
   - Add APM X-Gene host bridge driver
   - Add TI Keystone host bridge driver
   - Add Xilinx AXI host bridge driver

  More detailed summary:

  Enumeration
    - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
    - Enable Config Request Retry Status when supported (Rajat Jain)
    - Add generic domain handling (Catalin Marinas)
    - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)

  Resource management
    - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
    - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Move _HPP & _HPX handling into core (Bjorn Helgaas)
    - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
    - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
    - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
    - Fix wait time in pciehp timeout message (Yinghai Lu)
    - Add more pciehp Slot Control debug output (Yinghai Lu)
    - Stop disabling pciehp notifications during init (Yinghai Lu)

  MSI
    - Remove arch_msi_check_device() (Alexander Gordeev)
    - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
    - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
    - Remove unused kobject from struct msi_desc (Yijing Wang)
    - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
    - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
    - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
    - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
    - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)

  Power management
    - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
    - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)

  AER
    - Add additional AER error strings (Gong Chen)
    - Make <linux/aer.h> standalone includable (Thierry Reding)

  Virtualization
    - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
    - Add ACS quirk for Intel 10G NICs (Alex Williamson)
    - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
    - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
    - Add device flag helpers (Ethan Zhao)
    - Assume all Mellanox devices have broken INTx masking (Gavin Shan)

  Generic host bridge driver
    - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
    - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
    - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
    - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
    - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
    - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
    - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
    - Add arm64 architectural support for PCI (Liviu Dudau)

  APM X-Gene
    - Add APM X-Gene PCIe driver (Tanmay Inamdar)
    - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)

  Freescale i.MX6
    - Probe in module_init(), not fs_initcall() (Lucas Stach)
    - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)

  Marvell MVEBU
    - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)

  NVIDIA Tegra
    - Make sure the PCIe PLL is really reset (Eric Yuen)
    - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
    - Fix extended configuration space mapping (Peter Daifuku)
    - Implement resource hierarchy (Thierry Reding)
    - Clear CLKREQ# enable on port disable (Thierry Reding)
    - Add Tegra124 support (Thierry Reding)

  ST Microelectronics SPEAr13xx
    - Pass config resource through reg property (Pratyush Anand)

  Synopsys DesignWare
    - Use NULL instead of false (Fabio Estevam)
    - Parse bus-range property from devicetree (Lucas Stach)
    - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
    - Remove pci_assign_unassigned_resources() (Lucas Stach)
    - Check private_data validity in single place (Lucas Stach)
    - Setup and clear exactly one MSI at a time (Lucas Stach)
    - Remove open-coded bitmap operations (Lucas Stach)
    - Fix configuration base address when using 'reg' (Minghuan Lian)
    - Fix IO resource end address calculation (Minghuan Lian)
    - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
    - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
    - Add support for v3.65 hardware (Murali Karicheri)
    - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)

  TI Keystone
    - Add TI Keystone PCIe driver (Murali Karicheri)
    - Limit MRSS for all downstream devices (Murali Karicheri)
    - Assume controller is already in RC mode (Murali Karicheri)
    - Set device ID based on SoC to support multiple ports (Murali Karicheri)

  Xilinx AXI
    - Add Xilinx AXI PCIe driver (Srikanth Thokala)
    - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)

  Miscellaneous
    - Clean up whitespace (Quentin Lambert)
    - Remove assignments from "if" conditions (Quentin Lambert)
    - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
    - x86: Mark DMI tables as initialization data (Mathias Krause)
    - x86: Move __init annotation to the correct place (Mathias Krause)
    - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
    - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
    - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
    - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
    - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"

* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
  arm64: dts: Add APM X-Gene PCIe device tree nodes
  PCI: Add ACS quirk for AMD A88X southbridge devices
  PCI: xgene: Add APM X-Gene PCIe driver
  PCI: designware: Remove open-coded bitmap operations
  PCI/MSI: Remove unnecessary temporary variable
  PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
  MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
  PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
  PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
  PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
  PCI/MSI: Remove unused kobject from struct msi_desc
  PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
  PCI/MSI: Move D0 check into pci_msi_check_device()
  PCI/MSI: Remove arch_msi_check_device()
  irqchip: armada-370-xp: Remove arch_msi_check_device()
  PCI/MSI/PPC: Remove arch_msi_check_device()
  arm64: Add architectural support for PCI
  PCI: Add pci_remap_iospace() to map bus I/O resources
  of/pci: Add support for parsing PCI host bridge resources from DT
  of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
  ...

Conflicts:
	arch/arm64/boot/dts/apm-storm.dtsi
2014-10-09 15:03:49 -04:00
Linus Torvalds e4e65676f2 Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
 
 - s390 moves closer towards host large page support
 
 - PowerPC has improved support for debugging (both inside the guest and
   via gdbstub) and support for e6500 processors
 
 - ARM/ARM64 support read-only memory (which is necessary to put firmware
   in emulated NOR flash)
 
 - x86 has the usual emulator fixes and nested virtualization improvements
   (including improved Windows support on Intel and Jailhouse hypervisor
   support on AMD), adaptive PLE which helps overcommitting of huge guests.
   Also included are some patches that make KVM more friendly to memory
   hot-unplug, and fixes for rare caching bugs.
 
 Two patches have trivial mm/ parts that were acked by Rik and Andrew.
 
 Note: I will soon switch to a subkey for signing purposes.  To verify
 future signed pull requests from me, please update my key with
 "gpg --recv-keys 9B4D86F2".  You should see 3 new subkeys---the
 one for signing will be a 2048-bit RSA key, 4E6B09D7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUL5sPAAoJEBvWZb6bTYbyfkEP/3MNhSyn6HCjPjtjLNPAl9KL
 WpExZSUFL2+4CztpdGIsek1BeJYHmqv3+c5S+WvaWVA1aqh2R7FT1D1ErBLjgLQq
 lq23IOr+XxmC3dXQUEEk+TlD+283UzypzEG4l4UD3JYg79fE3UrXAz82SeyewJDY
 x7aPYhkZG3RHu+wAyMPasG6E3zS5LySdUtGWbiPwz5BejrhBJoJdeb2WIL/RwnUK
 7ppSLB5EoFj/uMkuyeAAdAbdfSrhHA6faDZxNdxS9k9wGutrhhfUoQ49ONrKG4dV
 sFo1tSPTVgRs8QFYUZ2fJUPBAmUVddsgqh2K9d0NftGTq7b8YszaCsfFrs2/Y4MU
 YxssWEhxsfszerCu12bbAJrv6JBZYQ7TwGvI9L7P0iFU6IVw/djmukU4AkM9/e91
 YS/cue/PN+9Pn2ccXzL9J7xRtZb8FsOuRsCXTCmbOwDkLmrKPDBN2t3RUbeF+Eam
 ABrpWnLKX13kZSo4LKU+/niarzmPMp7odQfHVdr8ea0fiYLp4iN8puA20WaSPIgd
 CLvm+RAvXe5Lm91L4mpFotJ2uFyK6QlIYJV4FsgeWv/0D0qppWQi0Utb/aCNHCgy
 z8MyUMD48y7EpoQrFYr/7cddXIu0/NegnM8I1coVjIPEk4NfeebGUlCJ/V3D8wMG
 BgEfS2x6jRc5zB3hjwDr
 =iEVi
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Fixes and features for 3.18.

  Apart from the usual cleanups, here is the summary of new features:

   - s390 moves closer towards host large page support

   - PowerPC has improved support for debugging (both inside the guest
     and via gdbstub) and support for e6500 processors

   - ARM/ARM64 support read-only memory (which is necessary to put
     firmware in emulated NOR flash)

   - x86 has the usual emulator fixes and nested virtualization
     improvements (including improved Windows support on Intel and
     Jailhouse hypervisor support on AMD), adaptive PLE which helps
     overcommitting of huge guests.  Also included are some patches that
     make KVM more friendly to memory hot-unplug, and fixes for rare
     caching bugs.

  Two patches have trivial mm/ parts that were acked by Rik and Andrew.

  Note: I will soon switch to a subkey for signing purposes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
  kvm: do not handle APIC access page if in-kernel irqchip is not in use
  KVM: s390: count vcpu wakeups in stat.halt_wakeup
  KVM: s390/facilities: allow TOD-CLOCK steering facility bit
  KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
  arm/arm64: KVM: Report correct FSC for unsupported fault types
  arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
  kvm: Fix kvm_get_page_retry_io __gup retval check
  arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
  kvm: x86: Unpin and remove kvm_arch->apic_access_page
  kvm: vmx: Implement set_apic_access_page_addr
  kvm: x86: Add request bit to reload APIC access page address
  kvm: Add arch specific mmu notifier for page invalidation
  kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
  kvm: Fix page ageing bugs
  kvm/x86/mmu: Pass gfn and level to rmapp callback.
  x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
  kvm: x86: use macros to compute bank MSRs
  KVM: x86: Remove debug assertion of non-PAE reserved bits
  kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
  kvm: Faults which trigger IO release the mmap_sem
  ...
2014-10-08 05:27:39 -04:00
Joerg Roedel 09b5269a1b Merge branches 'arm/exynos', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
Conflicts:
	drivers/iommu/arm-smmu.c
2014-10-02 12:24:45 +02:00
Paolo Bonzini e77d99d4a4 Changes for KVM for arm/arm64 for 3.18
This includes a bunch of changes:
  - Support read-only memory slots on arm/arm64
  - Various changes to fix Sparse warnings
  - Correctly detect write vs. read Stage-2 faults
  - Various VGIC cleanups and fixes
  - Dynamic VGIC data strcuture sizing
  - Fix SGI set_clear_pend offset bug
  - Fix VTTBR_BADDR Mask
  - Correctly report the FSC on Stage-2 faults
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUJWAdAAoJEEtpOizt6ddy9cMH+gIoUPnRJLe+PPcOOyxOx6pr
 +CnD/zAd0sLvxZLP/LBOzu99H3YrbO5kwI/172/8G1zUNI2hp6YxEEJaBCTHrz6l
 RwgLy7a3EMMY51nJo5w2dkFUo8cUX9MsHqMpl2Xb7Dvo2ZHp+nDqRjwRY6yi+t4V
 dWSJTRG6X+DIWyysij6jBtfKU6MpU+4NW3Zdk1fapf8QDkn+cBtV5X2QcmERCaIe
 A1j9hiGi43KA3XWeeePU3aVaxC2XUhTayP8VsfVxoNG2manaS6lqjmbif5ghs/0h
 rw7R3/Aj0MJny2zT016MkvKJKRukuVRD6e1lcYghqnSJhL2FossowZ9fHRADpqU=
 =QgU8
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

Changes for KVM for arm/arm64 for 3.18

This includes a bunch of changes:
 - Support read-only memory slots on arm/arm64
 - Various changes to fix Sparse warnings
 - Correctly detect write vs. read Stage-2 faults
 - Various VGIC cleanups and fixes
 - Dynamic VGIC data strcuture sizing
 - Fix SGI set_clear_pend offset bug
 - Fix VTTBR_BADDR Mask
 - Correctly report the FSC on Stage-2 faults

Conflicts:
	virt/kvm/eventfd.c
	[duplicate, different patch where the kvm-arm version broke x86.
	 The kvm tree instead has the right one]
2014-09-27 11:03:33 +02:00
Andres Lagar-Cavilla bb0ca6acd4 kvm: Fix kvm_get_page_retry_io __gup retval check
Confusion around -EBUSY and zero (inside a BUG_ON no less).

Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-26 10:21:29 +02:00
Christoffer Dall 0fea6d7628 arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
The sgi values calculated in read_set_clear_sgi_pend_reg() and
write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4
with catastrophic results in that subfunctions ended up overwriting
memory not allocated for the expected purpose.

This showed up as bugs in kfree() and the kernel complaining a lot of
you turn on memory debugging.

This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2

Reported-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-25 19:38:25 +02:00
Joerg Roedel ee5ba30ff7 kvm: iommu: Convert to use new iommu_capable() API function
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-09-25 15:47:38 +02:00
Tang Chen fe71557afb kvm: Add arch specific mmu notifier for page invalidation
This will be used to let the guest run while the APIC access page is
not pinned.  Because subsequent patches will fill in the function
for x86, place the (still empty) x86 implementation in the x86.c file
instead of adding an inline function in kvm_host.h.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:59 +02:00
Tang Chen 445b823695 kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
Different architectures need different requests, and in fact we
will use this function in architecture-specific code later. This
will be outside kvm_main.c, so make it non-static and rename it to
kvm_make_all_cpus_request().

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:59 +02:00
Andres Lagar-Cavilla 5712846808 kvm: Fix page ageing bugs
1. We were calling clear_flush_young_notify in unmap_one, but we are
within an mmu notifier invalidate range scope. The spte exists no more
(due to range_start) and the accessed bit info has already been
propagated (due to kvm_pfn_set_accessed). Simply call
clear_flush_young.

2. We clear_flush_young on a primary MMU PMD, but this may be mapped
as a collection of PTEs by the secondary MMU (e.g. during log-dirty).
This required expanding the interface of the clear_flush_young mmu
notifier, so a lot of code has been trivially touched.

3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate
the access bit by blowing the spte. This requires proper synchronizing
with MMU notifier consumers, like every other removal of spte's does.

Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:58 +02:00
David Matlack 2ea75be321 kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
vcpu ioctls can hang the calling thread if issued while a vcpu is running.
However, invalid ioctls can happen when userspace tries to probe the kind
of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case,
we know the ioctl is going to be rejected as invalid anyway and we can
fail before trying to take the vcpu mutex.

This patch does not change functionality, it just makes invalid ioctls
fail faster.

Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:55 +02:00
Andres Lagar-Cavilla 234b239bea kvm: Faults which trigger IO release the mmap_sem
When KVM handles a tdp fault it uses FOLL_NOWAIT. If the guest memory
has been swapped out or is behind a filemap, this will trigger async
readahead and return immediately. The rationale is that KVM will kick
back the guest with an "async page fault" and allow for some other
guest process to take over.

If async PFs are enabled the fault is retried asap from an async
workqueue. If not, it's retried immediately in the same code path. In
either case the retry will not relinquish the mmap semaphore and will
block on the IO. This is a bad thing, as other mmap semaphore users
now stall as a function of swap or filemap latency.

This patch ensures both the regular and async PF path re-enter the
fault allowing for the mmap semaphore to be relinquished in the case
of IO wait.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:54 +02:00