If TSS we are switching to resides in high memory task switch will fail
since address will be truncated. Windows2k3 does this sometimes when
running with more then 4G
Cc: stable@kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We only allocate memory for 32 MCE banks (KVM_MAX_MCE_BANKS) but we
allow user space to fill up to 255 on setup (mcg_cap & 0xff), corrupting
kernel memory. Catch these overflows.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On a 32 bits compile, commit 3da0dd433d
introduced the following warnings:
arch/x86/kvm/mmu.c: In function ‘kvm_set_pte_rmapp’:
arch/x86/kvm/mmu.c:770: warning: cast to pointer from integer of different size
arch/x86/kvm/mmu.c: In function ‘kvm_set_spte_hva’:
arch/x86/kvm/mmu.c:849: warning: cast from pointer to integer of different size
The following patch uses 'unsigned long' instead of u64 to match the
pointer size on both arches.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
hrtimer->base can be temporarily NULL due to racing hrtimer_start.
See switch_hrtimer_base/lock_hrtimer_base.
Use hrtimer_get_remaining which is robust against it.
CC: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
this is needed for kvm if it want ksm to directly map pages into its
shadow page tables.
[marcelo: cast pfn assignment to u64]
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
this flag notify that the host physical page we are pointing to from
the spte is write protected, and therefore we cant change its access
to be write unless we run get_user_pages(write = 1).
(this is needed for change_pte support in kvm)
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When using mmu notifiers, we are allowed to remove the page count
reference tooken by get_user_pages to a specific page that is mapped
inside the shadow page tables.
This is needed so we can balance the pagecount against mapcount
checking.
(Right now kvm increase the pagecount and does not increase the
mapcount when mapping page into shadow page table entry,
so when comparing pagecount against mapcount, you have no
reliable result.)
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The number of entries is multiplied by the entry size, which can
overflow on 32-bit hosts. Bound the entry count instead.
Reported-by: David Wagner <daw@cs.berkeley.edu>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
It is possible that stale EPTP-tagged mappings are used, if a
vcpu migrates to a different pcpu.
Set KVM_REQ_TLB_FLUSH in vmx_vcpu_load, when switching pcpus, which
will invalidate both VPID and EPT mappings on the next vm-entry.
Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When running nested we need to touch the l1 guests
tsc_offset. Otherwise changes will be lost or a wrong value
be read.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When svm_vcpu_load is called while the vcpu is running in
guest mode the tsc adjustment made there is lost on the next
emulated #vmexit. This causes the tsc running backwards in
the guest. This patch fixes the issue by also adjusting the
tsc_offset in the emulated hsave area so that it will not
get lost.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (202 commits)
MAINTAINERS: update KVM entry
KVM: correct error-handling code
KVM: fix compile warnings on s390
KVM: VMX: Check cpl before emulating debug register access
KVM: fix misreporting of coalesced interrupts by kvm tracer
KVM: x86: drop duplicate kvm_flush_remote_tlb calls
KVM: VMX: call vmx_load_host_state() only if msr is cached
KVM: VMX: Conditionally reload debug register 6
KVM: Use thread debug register storage instead of kvm specific data
KVM guest: do not batch pte updates from interrupt context
KVM: Fix coalesced interrupt reporting in IOAPIC
KVM guest: fix bogus wallclock physical address calculation
KVM: VMX: Fix cr8 exiting control clobbering by EPT
KVM: Optimize kvm_mmu_unprotect_page_virt() for tdp
KVM: Document KVM_CAP_IRQCHIP
KVM: Protect update_cr8_intercept() when running without an apic
KVM: VMX: Fix EPT with WP bit change during paging
KVM: Use kvm_{read,write}_guest_virt() to read and write segment descriptors
KVM: x86 emulator: Add adc and sbb missing decoder flags
KVM: Add missing #include
...
Debug registers may only be accessed from cpl 0. Unfortunately, vmx will
code to emulate the instruction even though it was issued from guest
userspace, possibly leading to an unexpected trap later.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
No need to call it before each kvm_(set|get)_msr_common()
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Only reload debug register 6 if we're running with the guest's
debug registers. Saves around 150 cycles from the guest lightweight
exit path.
dr6 contains a couple of bits that are updated on #DB, so intercept
that unconditionally and update those bits then.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of saving the debug registers from the processor to a kvm data
structure, rely in the debug registers stored in the thread structure.
This allows us not to save dr6 and dr7.
Reduces lightweight vmexit cost by 350 cycles, or 11 percent.
Signed-off-by: Avi Kivity <avi@redhat.com>
Don't call adjust_vmx_controls() two times for the same control.
It restores options that were dropped earlier. This loses us the cr8
exit control, which causes a massive performance regression Windows x64.
Cc: stable@kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We know no pages are protected, so we can short-circuit the whole thing
(including fairly nasty guest memory accesses).
Signed-off-by: Avi Kivity <avi@redhat.com>
QNX update WP bit when paging enabled, which is not covered yet. This one fix
QNX boot with EPT.
Cc: stable@kernel.org
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Segment descriptors tables can be placed on two non-contiguous pages.
This patch makes reading segment descriptors by linear address.
Signed-off-by: Mikhail Ershov <Mike.Ershov@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add missing decoder flags for adc and sbb instructions
(opcodes 0x14-0x15, 0x1c-0x1d)
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
According to 16.2.5 in the SDM, eflags.vm in the tss is consulted before loading
and new segments. If eflags.vm == 1, then the segments are treated as 16-bit
segments. The LDTR and TR are not normally available in vm86 mode so if they
happen to somehow get loaded, they need to be treated as 32-bit segments.
This fixes an invalid vmentry failure in a custom OS that was happening after
a task switch into vm8086 mode. Since the segments were being mistakenly
treated as 32-bit, we loaded garbage state.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We set rflags.vm86 when virtualizing real mode to do through vm8086 mode;
so we need to take it out again when reading rflags.
Signed-off-by: Avi Kivity <avi@redhat.com>
Since on vcpu entry we do it only if apic is enabled we should do
it when TPR is changed while apic is disabled. This happens when windows
resets HW without setting TPR to zero.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Nested SVM is (in my experience) stable enough to be enabled by
default. So omit the requirement to pass a module parameter.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Not checking for this flag breaks any nested hypervisor that does not
set VINTR. So fix it with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes one indentation level from nested_svm_intr and
makes the logic more readable.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This check is not necessary. We have to sync the vcpu->arch.cr2 always
back to the VMCB. This patch remove the is_nested check.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch moves the handling for special nested vmexits like #pf to a
separate function. This makes the kvm_override parameter obsolete and
makes the code more readable.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If nested svm fails to load the msrpm the vmrun succeeds with the old
msrpm which is not correct. This patch changes the logic to roll back
to host mode in case the msrpm cannot be loaded.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes the usage of nested_svm_do from the vmrun emulation
path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes the usage of nested_svm_do from the vmload and
vmsave emulation code paths.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes nested svm to call nested_svm_exit_handled_msr
directly and not through nested_svm_do.
[alex: fix oops due to nested kmap_atomics]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch is the starting point of removing nested_svm_do from the
nested svm code. The nested_svm_do function basically maps two guest
physical pages to host virtual addresses and calls a passed function
on it. This function pointer code flow is hard to read and not the
best technical solution here.
As a side effect this patch indroduces the nested_svm_[un]map helper
functions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Makes the code of this function more readable by removing on
indentation level for the core logic.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If this function returns true a nested vmexit is required. Move that
vmexit into the nested_svm_exit_handled function. This also simplifies
the handling of nested #pf intercepts in this function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
When caching guest intercepts there is no need anymore for the
nested_svm_exit_handled_real function. So move its code into
nested_svm_exit_handled.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
When the nested intercepts are cached we don't need to call
get_user_pages and/or map the nested vmcb on every nested #vmexit to
check who will handle the intercept.
Further this patch aligns the emulated svm behavior better to real
hardware.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This makes it more clear for which purpose these members in the vcpu_svm
exist.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
The interrupt completion code must run after nested exits are handled
because not injected interrupts or exceptions may be handled by the l1
guest first.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
The vmcb control area contains more then 800 bytes of reserved fields
which are unnecessarily copied. Fix this by introducing a copy
function which only copies the relevant part and saves time.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Only copy the necessary parts of the vmcb save area on vmrun and save
precious time.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
It is more efficient to copy only the relevant parts of the vmcb back to
the nested vmcb when we emulate an vmexit.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
