Commit Graph

16 Commits

Author SHA1 Message Date
Eric Miao 846c864cac [ARM] pxa: remove now unnecessary pxa_gpio_mode() calls in ac97
Now most (if not all) PXA platforms have been switched to the new MFP
API, it's rather safe to remove these unnecessary pxa_gpio_mode() calls
in pxa2xx-ac97-lib.c now.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao fb1bf8cd13 [ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:47 +08:00
Eric Miao e1aed7ca55 [ARM] pxa: remove the unnecessary restoring of MFP registers
MFP registers are saved and restored by the mfp sys_device before all
other platform devices, and it is unnecessary here.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:47 +08:00
Mike Rapoport 1ffafeb556 pxa2xx-ac97: fix reset gpio mode setting
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-11 19:01:51 +01:00
Mark Brown eae17754ab [ARM] pxa: merge AC97 platform data structures
Currently there are two possible platform datas for the PXA AC97 driver:
one supported by the generic AC97 driver only which provides callbacks
to allow board-specific configuration at stream startup and teardown,
and another for pxa2xx-ac97-lib which allows configuration of the reset
GPIO for PXA2xx CPUs.

Obviously this won't actually work when using the generic AC97 driver
since the drivers will attempt to parse the platform data in both
formats. Fix this by merging the two structures.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15 10:54:06 +08:00
Takashi Iwai b114701c0e Merge branch 'topic/asoc' into for-linus 2009-04-06 03:47:20 +02:00
Luotao Fu 057de50c0d pxa2xx-ac97: fix displaying GSR after reset timeout
the variable gsr_bit is set in isr. It is however set to 0 and interrupts are
disabled prior to reset. Hence it doesn't make a lot of sense to show the
content of gsr_bit in case of a reset timeout.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02 16:34:15 +01:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Takashi Iwai 1f2186951e ALSA: Fix wrong pointer to dev_err() in arm/pxa2xx-ac97-lib.c
Fix the wrong device pointer passed to dev_err().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19 14:16:19 +01:00
Robert Jarzmik 26ade896b6 ASoC: Allow choice of ac97 gpio reset line
As the PXA27x series allow 2 gpios to reset the ac97 bus,
allow through platform data configuration the definition of
the correct gpio which will reset the AC97 bus.

This comes from a silicon defect on the PXA27x series, where
the gpio must be manually controlled in warm reset cases.

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-15 20:20:37 +00:00
Eric Miao 5742964e91 [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
pxa-regs.h and hardware.h are not intended for use directly in driver
code, remove those unnecessary references.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:38 +08:00
Dmitry Baryshkov 7961233688 pxa2xx-ac97: switch AC unit to correct state before probing
If AC97 unit is in partially enabled state, early request_irq can trigger
IRQ storm or even full hang up. Workaround this by forcibly switching ACLINK off
at the start of the probe.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Eric Miao 1f017a9964 [ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h
The optimal change would be to move the AC97 register definitions into
the AC97 driver, unfortunately, the registers are shared between several
files. Move them into a dedicated regs-ac97.h first.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:42:39 +08:00
Marc Zyngier 8825e8e8d0 ALSA: Fix pxa2xx-ac97-lib.c compilation
The last ALSA merge broke pxa2xx-ac97-lib.c, as it brought back
references to cpu_is_pxa21x that Eric Miao removed in commit
0ffcbfd54ea81ca24c0749f55ca4fcf3e2bdc23e:

	[ARM] pxa: make cpu_is_pxa2* macros more consistent

This patch gets rid of those references, and only keeps cpu_is_pxa25x().

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-14 11:02:21 +02:00
Dmitry Baryshkov 9d1cf39be6 ALSA: pxa2xx-ac97-lib: support building for several CPUs
Support building of pxa2xx-ac97-lib for several CPUs by making code
run-time selected, not only compile-time.

[Fixed 3XX->3xx typos in ifdef checks -- broonie.]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23 08:18:09 +02:00
Dmitry Baryshkov 9c63634221 ALSA: Separate common pxa2xx-ac97 code
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code.
Move all common code into separate module snd-pxa2xx-lib.

[Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings
 -- broonie]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23 08:18:08 +02:00