Commit Graph

37 Commits

Author SHA1 Message Date
Peter Zijlstra c73464b1c8 sched/core: Fix trace_sched_switch()
__trace_sched_switch_state() is the last remaining PREEMPT_ACTIVE
user, move trace_sched_switch() from prepare_task_switch() to
__schedule() and propagate the @preempt argument.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-06 17:08:15 +02:00
Peter Zijlstra fbd705a0c6 sched: Introduce the 'trace_sched_waking' tracepoint
Mathieu reported that since 317f394160 ("sched: Move the second half
of ttwu() to the remote cpu") trace_sched_wakeup() can happen out of
context of the waker.

This is a problem when you want to analyse wakeup paths because it is
now very hard to correlate the wakeup event to whoever issued the
wakeup.

OTOH trace_sched_wakeup() is issued at the point where we set
p->state = TASK_RUNNING, which is right were we hand the task off to
the scheduler, so this is an important point when looking at
scheduling behaviour, up to here its been the wakeup path everything
hereafter is due to scheduler policy.

To bridge this gap, introduce a second tracepoint: trace_sched_waking.
It is guaranteed to be called in the waker context.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Francis Giraldeau <francis.giraldeau@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150609091336.GQ3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-03 12:21:22 +02:00
Peter Zijlstra 80ed87c8a9 sched/wait: Introduce TASK_NOLOAD and TASK_IDLE
Currently people use TASK_INTERRUPTIBLE to idle kthreads and wait for
'work' because TASK_UNINTERRUPTIBLE contributes to the loadavg. Having
all idle kthreads contribute to the loadavg is somewhat silly.

Now mostly this works OK, because kthreads have all their signals
masked. However there's a few sites where this is causing problems and
TASK_UNINTERRUPTIBLE should be used, except for that loadavg issue.

This patch adds TASK_NOLOAD which, when combined with
TASK_UNINTERRUPTIBLE avoids the loadavg accounting.

As most of imagined usage sites are loops where a thread wants to
idle, waiting for work, a helper TASK_IDLE is introduced.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19 08:39:18 +02:00
Oleg Nesterov 8f9fbf092c sched: Fix the PREEMPT_ACTIVE check in __trace_sched_switch_state()
task_preempt_count() has nothing to do with the actual preempt counter,
thread_info->saved_preempt_count is only valid right after switch_to().

__trace_sched_switch_state() can use preempt_count(), prev is still the
current task when trace_sched_switch() is called.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[ Added BUG_ON(). ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20141007195108.GB28002@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28 10:47:53 +01:00
Andy Lutomirski dfc68f29ae sched, trace: Add a tracepoint for IPI-less remote wakeups
Remote wakeups of polling CPUs are a valuable performance
improvement; add a tracepoint to make it much easier to verify that
they're working.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: nicolas.pitre@linaro.org
Cc: daniel.lezcano@linaro.org
Cc: umgwanakikbuti@gmail.com
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/16205aee116772aa686814f9b13bccb562108047.1401902905.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05 12:09:50 +02:00
Mel Gorman 286549dcaf sched: add tracepoints related to NUMA task migration
This patch adds three tracepoints
 o trace_sched_move_numa	when a task is moved to a node
 o trace_sched_swap_numa	when a task is swapped with another task
 o trace_sched_stick_numa	when a numa-related migration fails

The tracepoints allow the NUMA scheduler activity to be monitored and the
following high-level metrics can be calculated

 o NUMA migrated stuck	 nr trace_sched_stick_numa
 o NUMA migrated idle	 nr trace_sched_move_numa
 o NUMA migrated swapped nr trace_sched_swap_numa
 o NUMA local swapped	 trace_sched_swap_numa src_nid == dst_nid (should never happen)
 o NUMA remote swapped	 trace_sched_swap_numa src_nid != dst_nid (should == NUMA migrated swapped)
 o NUMA group swapped	 trace_sched_swap_numa src_ngid == dst_ngid
			 Maybe a small number of these are acceptable
			 but a high number would be a major surprise.
			 It would be even worse if bounces are frequent.
 o NUMA avg task migs.	 Average number of migrations for tasks
 o NUMA stddev task mig	 Self-explanatory
 o NUMA max task migs.	 Maximum number of migrations for a single task

In general the intent of the tracepoints is to help diagnose problems
where automatic NUMA balancing appears to be doing an excessive amount
of useless work.

[akpm@linux-foundation.org: remove semicolon-after-if, repair coding-style]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Ingo Molnar c90423d1de Merge branch 'sched/core' into core/locking, to prepare the kernel/locking/ file move
Conflicts:
	kernel/Makefile

There are conflicts in kernel/Makefile due to file moving in the
scheduler tree - resolve them.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 07:50:37 +01:00
Oleg Nesterov 6a716c90a5 hung_task debugging: Add tracepoint to report the hang
Currently check_hung_task() prints a warning if it detects the
problem, but it is not convenient to watch the system logs if
user-space wants to be notified about the hang.

Add the new trace_sched_process_hang() into check_hung_task(),
this way a user-space monitor can easily wait for the hang and
potentially resolve a problem.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Sullivan <dsulliva@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20131019161828.GA7439@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-31 11:16:18 +01:00
Peter Zijlstra 0102874755 sched: Create more preempt_count accessors
We need a few special preempt_count accessors:
 - task_preempt_count() for when we're interested in the preemption
   count of another (non-running) task.
 - init_task_preempt_count() for properly initializing the preemption
   count.
 - init_idle_preempt_count() a special case of the above for the idle
   threads.

With these no generic code ever touches thread_info::preempt_count
anymore and architectures could choose to remove it.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-jf5swrio8l78j37d06fzmo4r@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-25 14:07:52 +02:00
Oleg Nesterov 12473965c3 tracing/perf: Reimplement TP_perf_assign() logic
The next patch tries to avoid the costly perf_trace_buf_* calls
when possible but there is a problem. We can only do this if
__task == NULL, perf_tp_event(task != NULL) has the additional
code for this case.

Unfortunately, TP_perf_assign/__perf_xxx which changes the default
values of __count/__task variables for perf_trace_buf_submit() is
called "too late", after we already did perf_trace_buf_prepare(),
and the optimization above can't work.

So this patch simply embeds __perf_xxx() into TP_ARGS(), this way
DECLARE_EVENT_CLASS() can use the result of assignments hidden in
"args" right after ftrace_get_offsets_##call() which is mostly
trivial. This allows us to have the fast-path "__task != NULL"
check at the start, see the next patch.

Link: http://lkml.kernel.org/r/20130806160844.GA2739@redhat.com

Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-08-13 21:05:57 -04:00
Oleg Nesterov 36009d07b7 tracing/perf: Expand TRACE_EVENT(sched_stat_runtime)
To simplify the review of the next patches:

1. We are going to reimplent __perf_task/counter and embedd them
   into TP_ARGS(). expand TRACE_EVENT(sched_stat_runtime) into
   DECLARE_EVENT_CLASS() + DEFINE_EVENT(), this way they can use
   different TP_ARGS's.

2. Change perf_trace_##call() macro to do perf_fetch_caller_regs()
   right before perf_trace_buf_prepare().

   This way it evaluates TP_ARGS() asap, the next patch explores
   this fact.

   Note: after 87f44bbc perf_trace_buf_prepare() doesn't need
   "struct pt_regs *regs", perhaps it makes sense to remove this
   argument. And perhaps we can teach perf_trace_buf_submit()
   to accept regs == NULL and do fetch_caller_regs(CALLER_ADDR1)
   in this case.

3. Cosmetic, but the typecast from "void*" buys nothing. It just
   adds the noise, remove it.

Link: http://lkml.kernel.org/r/20130806160841.GA2736@redhat.com

Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-08-13 21:05:12 -04:00
Thomas Gleixner f2530dc71c kthread: Prevent unpark race which puts threads on the wrong cpu
The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:

CPU0	       	 	CPU1  	     	    CPU2
unpark(T)				    wake_up_process(T)
  clear(SHOULD_PARK)	T runs
			leave parkme() due to !SHOULD_PARK  
  bind_to(CPU2)		BUG_ON(wrong CPU)						    

We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.

The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.

Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.

Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.

The migration thread has another related issue.

CPU0	      	     	 CPU1
Bring up CPU2
create_thread(T)
park(T)
 wait_for_completion()
			 parkme()
			 complete()
sched_set_stop_task()
			 schedule(TASK_PARKED)

The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().

Reported-by: Dave Jones <davej@redhat.com>
Reported-and-tested-by: Dave Hansen <dave@sr71.net>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: dhillf@gmail.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-12 14:18:43 +02:00
Andrew Vagin e6dab5ffab perf/trace: Add ability to set a target task for events
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.

Now a target task can be set by using __perf_task().

The original idea and a draft patch belongs to Peter Zijlstra.

I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.

Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31 17:02:05 +02:00
Oleg Nesterov 6308191f6f tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec()
1. TRACE_EVENT(sched_process_exec) forgets to actually use the
   old pid argument, it sets ->old_pid = p->pid.

2. search_binary_handler() uses the wrong pid number. tracepoint
   needs the global pid_t from the root namespace, while old_pid
   is the virtual pid number as it seen by the tracer/parent.

With this patch we have two pid_t's in search_binary_handler(),
not really nice. Perhaps we should switch to "struct pid*", but
in this case it would be better to cleanup the current code
first and move the "depth == 0" code outside.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Smith <dsmith@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Link: http://lkml.kernel.org/r/20120330162636.GA4857@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 11:53:22 +02:00
Ingo Molnar 737f24bda7 Merge branch 'perf/urgent' into perf/core
Conflicts:
	tools/perf/builtin-record.c
	tools/perf/builtin-top.c
	tools/perf/perf.h
	tools/perf/util/top.h

Merge reason: resolve these cherry-picking conflicts.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-05 09:20:08 +01:00
David Smith 4ff16c25e2 tracepoint, vfs, sched: Add exec() tracepoint
Added a minimal exec tracepoint. Exec is an important major event
in the life of a task, like fork(), clone() or exit(), all of
which we already trace.

[ We also do scheduling re-balancing during exec() - so it's useful
  from a scheduler instrumentation POV as well. ]

If you want to watch a task start up, when it gets exec'ed is a good place
to start.  With the addition of this tracepoint, exec's can be monitored
and better picture of general system activity can be obtained. This
tracepoint will also enable better process life tracking, allowing you to
answer questions like "what process keeps starting up binary X?".

This tracepoint can also be useful in ftrace filtering and trigger
conditions: i.e. starting or stopping filtering when exec is called.

Signed-off-by: David Smith <dsmith@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F314D19.7030504@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-23 09:28:06 +01:00
Peter Zijlstra 8c79a045fd sched/events: Revert trace_sched_stat_sleeptime()
Commit 1ac9bc69 ("sched/tracing: Add a new tracepoint for sleeptime")
added a new sched:sched_stat_sleeptime tracepoint.

It's broken: the first sample we get on a task might be bad because
of a stale sleep_start value that wasn't reset at the last task switch
because the tracepoint was not active.

It also breaks the existing schedstat samples due to the side
effects of:

-               se->statistics.sleep_start = 0;
...
-               se->statistics.block_start = 0;

Nor do I see means to fix it without adding overhead to the scheduler
fast path, which I'm not willing to for the sake of redundant
instrumentation.

Most importantly, sleep time information can already be constructed
by tracing context switches and wakeups, and taking the timestamp
difference between the schedule-out, the wakeup and the schedule-in.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pc4c9qhl8q6vg3bs4j6k0rbd@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 12:06:55 +01:00
Arun Sharma 1ac9bc6943 sched/tracing: Add a new tracepoint for sleeptime
If CONFIG_SCHEDSTATS is defined, the kernel maintains
information about how long the task was sleeping or
in the case of iowait, blocking in the kernel before
getting woken up.

This will be useful for sleep time profiling.

Note: this information is only provided for sched_fair.
Other scheduling classes may choose to provide this in
the future.

Note: the delay includes the time spent on the runqueue
as well.

Signed-off-by: Arun Sharma <asharma@fb.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1324512940-32060-2-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23 17:56:17 +01:00
Andrew Vagin b781a602ac events, sched: Add tracepoint for accounting blocked time
This tracepoint shows how long a task is sleeping in uninterruptible state.

E.g. it may show how long and where a mutex is waited for.

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322471015-107825-8-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:51:23 +01:00
Peter Zijlstra 557ab42542 sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
We had need to see the difference between scheduling a runnable task and
a runnable task being involuntarily preempted.

No app should rely on the old string output (the binary
trace event record format is not changed).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1316164603.10174.11.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-26 13:25:54 +02:00
Steven Rostedt a8027073eb tracing/sched: Add sched_pi_setprio tracepoint
Add a tracepoint that shows the priority of a task being boosted
via priority inheritance.

Cc: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-21 10:56:41 -04:00
Li Zefan 210f766915 tracing: Convert more sched events to DEFINE_EVENT
Convert sched_wait_task to DEFINE_EVENT, and save ~1K:

   text    data     bss     dec     hex filename
 104595    9424    4992  119011   1d0e3 kernel/sched.o.orig
 103619    9344    4992  117955   1ccc3 kernel/sched.o

No change in functionality.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3787.2040800@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-28 17:12:50 -04:00
Peter Zijlstra 02f726949f sched, trace: Fix sched_switch() prev_state argument
For CONFIG_PREEMPT=y kernels the sched_switch(.prev_state) argument isn't
useful because we can get preempted with current->state != TASK_RUNNING
without actually getting removed from the runqueue.

Cure this by treating all preempted tasks as runnable from the tracer's
point of view.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cautiously-acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1275322715.27810.23323.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-01 09:27:17 +02:00
Peter Zijlstra 27a9da6538 sched: Remove rq argument to the tracepoints
struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-07 11:28:17 +02:00
Masami Hiramatsu d1eb650ff4 tracepoint: Move signal sending tracepoint to events/signal.h
Move signal sending event to events/signal.h. This patch also
renames sched_signal_send event to signal_generate.

Changes in v4:
 - Fix a typo of task_struct pointer.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Add siginfo argument
 - Add siginfo storing macro

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reviewed-by: Jason Baron <jbaron@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215645.30449.60208.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 10:55:37 +01:00
Li Zefan 470dda7417 tracing: Restore original format of sched events
The original format for sched_stat_iowait and sched_stat_sleep:

  $ cat events/sched/sched_stat_iowait/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...

But commit commit 75ec29ab84
("tracing: Convert some sched trace events to DEFINE_EVENT and
_PRINT") broke the format:

  $ cat events/sched/sched_stat_iowait/format
  print fmt: "task: %s:%d iowait: %Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  print fmt: "task: %s:%d sleep: %Lu [ns]", ...

No change in functionality.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E2951.9050800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 09:14:05 +01:00
Ingo Molnar 091ad3658e events: Rename TRACE_EVENT_TEMPLATE() to DECLARE_EVENT_CLASS()
It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?

To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:

  DECLARE_EVENT_CLASS(class)

    DEFINE_EVENT(class, event1)
    DEFINE_EVENT(class, event2)
    DEFINE_EVENT(class, event3)

To complete this logic we should also rename TRACE_EVENT() to:

  DEFINE_SINGLE_EVENT(single_event)

... but in a more quiet moment of the kernel cycle.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 09:04:55 +01:00
Steven Rostedt 75ec29ab84 tracing: Convert some sched trace events to DEFINE_EVENT and _PRINT
Converting some of the scheduler trace events to use the
TRACE_EVENT_TEMPLATE, DEFINE_EVENT and DEFINE_EVENT_PRINT helped to
save some space:

$ size kernel/sched.o-*
   text	   data	    bss	    dec	    hex	filename
  79299	   6776	   2520	  88595	  15a13	kernel/sched.o-notrace
 101941	  11896	   2584	 116421	  1c6c5	kernel/sched.o-templ
 104779	  11896	   2584	 119259	  1d1db	kernel/sched.o-trace

sched.o-notrace is without any tracepoints compiled
sched.o-templ is with this patch
sched.o-trace is the tracepoints before this patch

The trace events converted to DEFINE_EVENT:

sched_wakeup, sched_wakeup_new, sched_process_free, sched_process_exit,
and sched_stat_wait.

The trace events converted to DEFINE_EVENT_PRINT:

sched_stat_sleep and sched_stat_iowait.

Note, since the TRACE_EVENT_TEMPLATE always uses a print, the
sched_stat_wait print format is defined in the template and this
template is used by sched_stat_sleep and sched_stat_iowait. But the
later two override the print format.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-24 18:24:00 -05:00
Ingo Molnar 434a83c3fb events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.

The primary way to see which fields are available is by looking
at the trace output, such as:

  gcc-18676 [000]   343.011728: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.012727: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.032692: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.033690: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.034687: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.035686: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.036684: irq_handler_entry: irq=0 handler=timer

While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:

  $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
   Error: failed to set filter with 22 (Invalid argument)

The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.

To solve this, we need to synchronize the printout and the field
names, wherever possible.

In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:

  perf-1380  [013]   724.903505: softirq_exit: vec=9 [action=RCU]
  perf-1380  [013]   724.904482: softirq_exit: vec=1 [action=TIMER]

This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.

This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.

We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 12:42:03 +02:00
Ingo Molnar f977bb4937 perf_counter, sched: Add sched_stat_runtime tracepoint
This allows more precise tracking of how the scheduler accounts
(and acts upon) a task having spent N nanoseconds of CPU time.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 18:17:28 +02:00
Linus Torvalds 483e3cd6a3 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...
2009-09-11 13:24:03 -07:00
Peter Zijlstra 768d0c2722 sched: Add wait, sleep and iowait accounting tracepoints
Add 3 schedstat tracepoints to help account for wait-time,
sleep-time and iowait-time.

They can also be used as a perf-counter source to profile tasks
on these clocks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <new-submission>
[ build fix for the !CONFIG_SCHEDSTATS case ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02 09:12:18 +02:00
Steven Rostedt f0693c8bd5 tracing/sched: show CPU task wakes up on in trace event
While debugging the scheduler push / pull algorithm, I found
it very annoying that the sched wake up events did not show
the CPU that the task was waking on. In order to analyze the
scheduler, I needed that information.

This patch adds recording of the CPU that a task is waking up
on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-26 00:32:03 -04:00
Li Zefan d0b6e04a4c tracing/events: Move TRACE_SYSTEM outside of include guard
If TRACE_INCLDUE_FILE is defined, <trace/events/TRACE_INCLUDE_FILE.h>
will be included and compiled, otherwise it will be
<trace/events/TRACE_SYSTEM.h>

So TRACE_SYSTEM should be defined outside of #if proctection,
just like TRACE_INCLUDE_FILE.

Imaging this scenario:

 #include <trace/events/foo.h>
    -> TRACE_SYSTEM == foo
 ...
 #include <trace/events/bar.h>
    -> TRACE_SYSTEM == bar
 ...
 #define CREATE_TRACE_POINTS
 #include <trace/events/foo.h>
    -> TRACE_SYSTEM == bar !!!

and then bar.h will be included and compiled.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A9CF1.2010007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-13 10:59:55 +02:00
Steven Rostedt 937cdb9db7 tracing: add previous task state info to sched switch event
It is useful to see the state of a task that is being switched out.
This patch adds the output of the state of the previous task in
the context switch event.

[ Impact: see state of switched out task in context switch ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26 20:29:19 +02:00
Mathieu Desnoyers de1d728606 tracepoint: trace_sched_migrate_task(): remove parameter
The orig_cpu parameter in trace_sched_migrate_task() is not necessary,
it can be got by using task_cpu(p) in the probe.

[ Impact: micro-optimization ]

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
[ modified from Mathieu's patch. The original patch is at:
  http://marc.info/?l=linux-kernel&m=123791201716239&w=2 ]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: zhaolei@cn.fujitsu.com
Cc: laijs@cn.fujitsu.com
LKML-Reference: <49FFFDB7.1050402@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 12:15:51 +02:00
Steven Rostedt ad8d75fff8 tracing/events: move trace point headers into include/trace/events
Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 22:05:43 -04:00